Tsavdaridis, K. D., D'Mello, C. & Hawes, M. (2009). Experimental Study of Ultra Shallow Floor Beams (USFB) with Perforated Steel Sections. Paper presented at the Nordic Steel Construction Conference 2009 - NSCC2009, 02-09-2009 - 04-09-2009, Malmö, Sweden.
Download (577kB) | Preview
ABSTRACT: In modern building construction design, floor spans are becoming longer. Hence, steel framed structures have become more competitive when compared with traditional reinforced concrete framed buildings. In order to minimise the structural section of the composite sections, and for economic reasons, steel perforated beams are designed to act compositely with the floor slab. When the concrete slab lies within the steel flanges, as in the Ultra Shallow Floor Beam (USFB), there is an additional benefit when considering fire resistance. The aim of this study is to investigate the contribution of the concrete in composite cellular beams in the case where the concrete slab lies between the beam flanges of a steel section, when resisting vertical shear forces. The concrete between the flanges enhances the load-carrying capacity by providing a load path to transfer the shear force. Four specimens of steel-concrete composite beams with web openings in the steel section were tested in this study. One bare steel section with web openings was also tested as a comparison. This is the first such investigation of the failure mode under shear resistance (Vierendeel action) of the Ultra Shallow Floor Beam. In the test specimens, the web opening diameter is 76% of the beam depth, which is the largest currently available. This represents the worst case in terms of Vierendeel bending forces generated in the vicinity of the web openings. The smaller the hole is, the easier it is for the trapped concrete between the flanges to transfer shear across the opening. The results from the composite beam tests show a significant increase in shear resistance. The percentage of the shear capacity improvement of the particular case is presented herein as well as the failure mode of the composite beams. The shear enhancement demonstrated in this study has been utilised software that is used in design practice.
|Item Type:||Conference or Workshop Item (Paper)|
|Subjects:||T Technology > TA Engineering (General). Civil engineering (General)|
|Divisions:||School of Engineering & Mathematical Sciences > Engineering|
Actions (login required)
Downloads per month over past year