Centrifuge modelling of tunnelling with forepoling

Divall, S., Taylor, R. N. & Xu, M. (2016). Centrifuge modelling of tunnelling with forepoling. International Journal of Physical Modelling in Geotechnics, 16(2), pp. 83-95. doi: 10.1680/jphmg.15.00019

[img]
Preview
Text - Accepted Version
Download (1MB) | Preview

Abstract

Geotechnical centrifuge modelling provides a means by which geotechnical events and processes can be better understood. In particular, the technique has proved invaluable when investigating collapse mechanisms in small scale models that can be related to full scale events. A series of eight plane strain centrifuge model tests investigating the effect of inserting inclusions around the annulus of a single tunnel in over consolidated clay has been conducted using the geotechnical centrifuge at City University London. The model used a compressed air supported circular cavity to simulate the tunnel. Stiff resin inclusions embedded around its periphery were used to represent closely spaced forepoles forming grout umbrella arches. Image processing was used to obtain patterns of displacements at the subsurface and displacement transducers measured vertical settlement at the ground surface level. The investigation focused on how different arrangements of forepoling affected tunnel stability. The influence of forepoling on normally accepted plastic collapse mechanisms is discussed. An optimisation of the forepoling layout is uggested in accordance with the findings.

Item Type: Article
Uncontrolled Keywords: Centrifuge modelling, Ground improvement, Tunnels and tunnelling, Ground movements
Subjects: T Technology > TA Engineering (General). Civil engineering (General)
Divisions: School of Engineering & Mathematical Sciences > Engineering
URI: http://openaccess.city.ac.uk/id/eprint/12675

Actions (login required)

View Item View Item

Downloads

Downloads per month over past year

View more statistics