The characterisation of diesel nozzle flow using high speed imaging of elastic light scattering

Lockett, R. D., Liverani, L., Thaker, D., Jeshani, M. & Tait, N. P. (2013). The characterisation of diesel nozzle flow using high speed imaging of elastic light scattering. Fuel, 106, pp. 605-616. doi: 10.1016/j.fuel.2012.10.065

[img]
Preview
Text - Accepted Version
Available under License : See the attached licence file.

Download (728kB) | Preview
[img]
Preview
Text (Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International Licence) - Other
Download (202kB) | Preview

Abstract

Two identical, conventional six-hole, valve-covered orifice (VCO) diesel injectors have been modified in order to provide optical access to the region below the needle, and the nozzle-flow passages. This has been achieved through the removal of the metal tips, and their replacement with transparent acrylic tips of identical geometry.

These two identical injectors were employed in order to offer comparability between the measurements. One of them had a dark, anodised inner surface at the base, while the other had a silvered inner surface at the base. Elastic scattering of incident white light from the internal cavitating flow inside the nozzle holes of the optically accessible diesel injector tips was captured on a high-speed electronic camera. The optical image data was obtained for three injector rail pressures ranging from 200 bar to 400 bar, and for five diesel fuels of varying density, viscosity, and distillation profile, in order to identify variations in cavitation flow behaviour inside the nozzle hole passages.

A set of mean time-resolved diesel fuel flow images were obtained from 30 successive fuel injection pulses, for each operating condition, for each injector. The mean cavitation image occurring in the nozzle holes was converted to the mean proportion of nozzle hole area producing cavitation-induced optical scattering. The mean normalised area images were then analysed, and were able to demonstrate the anticipated inverse relationship between injected fuel mass and cavitation volume fraction (indicated by mean normalised area), and the effect of fuel viscosity and distillation profile on cavitation volume fraction (again indicated by mean normalised area).

Item Type: Article
Additional Information: © 2013, Elsevier. Licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International http://creativecommons.org/licenses/by-nc-nd/4.0/
Uncontrolled Keywords: Diesel; Cavitation; Injection; Imaging
Divisions: School of Engineering & Mathematical Sciences > Engineering
URI: http://openaccess.city.ac.uk/id/eprint/13540

Actions (login required)

View Item View Item

Downloads

Downloads per month over past year

View more statistics