Hot ductility of high Al TWIP steels containing Nb and Nb-V

Qaban, A., Mintz, B., Kang, S. E. & Naher, S. (2017). Hot ductility of high Al TWIP steels containing Nb and Nb-V. Materials Science and Technology, 33(14), pp. 1645-1656. doi: 10.1080/02670836.2017.1309097

[img] Text - Accepted Version
Restricted to Repository staff only until 14 April 2018.

Download (1MB) | Request a copy

Abstract

The hot ductility of B-Ti-Nb-high Al (1.5%Al) containing TWIP steels having Ti/N ratios mainly in excess of 3.4/1 was obtained. After soaking at 1250°C, the tensile specimens were cooled at 12 or 60°C min−1 to the test temperature and then strained to failure at 3 × 10−3 s−1. Ductility was always good (reduction of area >40%), independent of Ti/N ratio or cooling rate. The good ductility is due to B segregation strengthening the grain boundaries and the low S level (0.005%S) limiting the volume fraction of MnS inclusions and restricting AlN precipitation to the matrix. Increasing the cooling rate, higher N levels and Nb resulted in a small improvement in ductility. An addition of V to the Nb-containing steels caused a slight deterioration in the hot ductility.

Item Type: Article
Additional Information: This is an Accepted Manuscript of an article published by Taylor & Francis in Materials Science and Technology on 14 April 2017, available online: https://doi.org/10.1080/02670836.2017.1309097.
Uncontrolled Keywords: TWIP steel, hot ductility, B, Ti, Al, N, Nb, V, MnS
Divisions: School of Engineering & Mathematical Sciences > Engineering
URI: http://openaccess.city.ac.uk/id/eprint/18583

Actions (login required)

View Item View Item

Downloads

Downloads per month over past year

View more statistics