City Research Online

Steam as the Working Fluid for Power Recovery from Exhaust Gases by Means of Screw Expanders

Stosic, N., Smith, I. K. & Kovacevic, A. (2009). Steam as the Working Fluid for Power Recovery from Exhaust Gases by Means of Screw Expanders. Paper presented at the International Conference on Compressors and Their Systems, 07-09-2009 - 09-09-2009, London, England.

Abstract

Rankine cycle systems, using steam as a working fluid, are not well suited to the recovery of power from heat sources in the 300–450 °C temperature range, such as internal combustion engine exhaust gases, mainly due to the relatively large enthalpy of vaporization of water. Admitting the steam to the expander as vapour approximately 50 per cent dry, would be preferable but turbines cannot be used to expand vapours from this state. However, screw expanders can operate well in this mode. It is shown that, apart from being environmentally benign and free from flammability risks, a screw-driven wet steam cycle system can recover power from engine exhaust gases, with comparable efficiencies to turbine-driven systems using organic fluids at a significantly lower cost per unit output.

Publication Type: Conference or Workshop Item (Paper)
Additional Information: Copyright Sage 2011
Publisher Keywords: power generation, screw expanders, wet steam
Subjects: T Technology > TA Engineering (General). Civil engineering (General)
Departments: School of Science & Technology > Engineering
[thumbnail of 2009_IMechE_Conference_Paper_on_Wet_Steam_Cycle.pdf]
Preview
PDF - Accepted Version
Download (135kB) | Preview

Export

Add to AnyAdd to TwitterAdd to FacebookAdd to LinkedinAdd to PinterestAdd to Email

Downloads

Downloads per month over past year

View more statistics

Actions (login required)

Admin Login Admin Login