The application of dynamic relaxation to the design of modular space structures

Topping, B.H.V.. (1978). The application of dynamic relaxation to the design of modular space structures. (Unpublished Doctoral thesis, City University London)

[img]
Preview
PDF - Accepted Version
Download (10MB) | Preview

Abstract

This thesis is concerned with the development and assessment of computer techniques for the formfinding and sizing of large modular building space structures suitable for urban development. The contents of the Chapters are summarised as follows: 1: An introduction to conceptual and computer aided design of large building space structures. 2: A review of topological computer design methods. 3: A comparison of a dynamic relaxation method, for the formfinding of modularly constrained structures subject to a dominant design loading case, with linear programming and fully stressed design methods. This comparison shows that the dynamic relaxation method is efficient and particularly suitable for interactive use. 4: A parametric study of the effects of the iteration parameters on the stability and rate of convergence is presented. No general rules appear to be possible regarding the effects of these parameters on stability. It is noted, however, that the number of structure modifications before the solution becomes apparent is independent of the parameters. The dynamic relaxation formfinding procedure is generalised to cater for different stress constraints in tension and compression members and, for the problem considered, derives a lighter form than the fully stressed design technique. The optimum form of the D.R. solution is verified by the linear programming technique. 5: An intuitive dynamic relaxation method for the sizing of structures of fixed topology subject to multiple loading cases ,and stress constraints is presented. The method also caters for maximum member area sizes and deflection constraints by the use of parallel elastic and elasto-plastic analyses. Solutions derived using this method are compared with solutions derived using the non-linear program algorithm. They are shown to be of similar weight and to require similar solution times. 6: Two dynamic relaxation methods are presented for the formfinding and sizing of multiply loaded space structures. The first or parallel method is suitable for deriving and sizing forms of optimum or near optimum weight by deleting members which are small in area size and reducing in size. The second or series method is particularly suitable for interactive use and consists of testing the efficiency of each member with respect to each loading case. The final topology is then sized considering all loading cases simultaneously. These methods are both applied to a bridging ground structure subject to multiple loads and compared with solutions derived using linear, nonlinear programming and topological design methods. The parallel dynamic relaxation method is then extended to cater for cable members allowing for on-off non-linearities and prestress effects. The bridging structure is subsequently redesigned using internal cable members and adjusting the prestress level to ensure that the bridge deck does not deflect vertically under the action of the primary loading case. 7: A summary of conclusions.

Item Type: Thesis (Doctoral)
Subjects: T Technology > TA Engineering (General). Civil engineering (General)
Divisions: School of Engineering & Mathematical Sciences > Engineering
URI: http://openaccess.city.ac.uk/id/eprint/8582

Actions (login required)

View Item View Item

Downloads

Downloads per month over past year

View more statistics