Items where Author is "Morar, N."
Article
Duarte Martinez, F., Syed, A., Dawson, K. , Tatlock, G. J., Morar, N. 
ORCID: 0000-0001-9109-8864, Kothari, M., Tang, C., Leggett, J., Mason-Flucke, J. C., Gibson, G., Nicholls, J. R., Gray, S. & Castelluccio, G. M. (2023).
Effect of NaCl and SO2 on the stress corrosion cracking of CMSX-4 at 550°C.
Materials at High Temperatures, 40(4),
pp. 283-295.
doi: 10.1080/09603409.2023.2205760
Morar, N. ORCID: 0000-0001-9109-8864, Holtham, N., Hackel, L. , Davami, K., Sharma, M., DeWald, A. & Roy, R. (2023).
Effects of high-energy laser peening followed by pre-hot corrosion on stress relaxation, microhardness, and fatigue life and strength of single-crystal nickel CMSX-4® superalloy.
The International Journal of Advanced Manufacturing Technology, 126(11-12),
pp. 4893-4912.
doi: 10.1007/s00170-023-11358-5
Morar, N., Roy, R. ORCID: 0000-0001-5491-7437, Mehnen, J. , Nicholls, J. R. & Gray, S. (2017).
The effect of trepanning speed of laser drilled acute angled cooling holes on the high temperature low cycle corrosion fatigue performance of CMSX-4 at 850 °C.
International Journal of Fatigue, 102,
pp. 112-120.
doi: 10.1016/j.ijfatigue.2017.04.017
Conference or Workshop Item
Martinez, D., Morar, N. ORCID: 0000-0001-9109-8864, Khotari, M. & Gray, S. (2020).
Investigation into the Effects of Salt Chemistry and SO2 on the Crack Initiation of CMSX-4 in Static Loading Conditions.
In:
Superalloys 2020.
14th International Symposium on Superalloys, 13-16 Sep 2021, Virtual.
doi: 10.1007/978-3-030-51834-9_73
Tapoglou, N., Mehnen, J., Butans, J. & Morar, N. ORCID: 0000-0001-9109-8864 (2016).
Online on-board Optimization of Cutting Parameter for Energy Efficient CNC Milling.
In: Seliger, G., Kohl, H. & Mallon, J. (Eds.),
Procedia CIRP.
13th Global Conference on Sustainable Manufacturing - Decoupling Growth from Resource Use, 16-18 Sep 2016, Vietnam.
doi: 10.1016/j.procir.2016.01.072
Morar, N. ORCID: 0000-0001-9109-8864, Roy, R. ORCID: 0000-0001-5491-7437, Mehnen, J. , Redding, L. E. & Harrison, A. (2013).
Data Mining and Knowledge Reuse for the Initial Systems Design and Manufacturing: Aero-engine Service Risk Drivers.
In:
Procedia CIRP.
2nd International Through-life Engineering Services Conference
doi: 10.1016/j.procir.2013.08.002