Items where Schools and Departments is "Mechanical Engineering & Aeronautics" and Year is 2008
Up a level |
Article
Andriotis, A., Gavaises, M. and Arcoumanis, C. (2008). Vortex flow and cavitation in diesel injector nozzles. Journal of Fluid Mechanics, 610, pp. 195-215. doi: 10.1017/S0022112008002668
Arcoumanis, C., Bae, C., Crookes, R. and Kinoshita, E. (2008). The potential of di-methyl ether (DME) as an alternative fuel for compression-ignition engines: A review. Fuel, 87(7), pp. 1014-1030. doi: 10.1016/j.fuel.2007.06.007
Banks, S. P. and Tomas-Rodriguez, M. (2008). From local to global control. 47th IEEE Conference on Decision and Control, 2008. CDC 2008, pp. 4426-4430. doi: 10.1109/CDC.2008.4739231
Chassaing, J. C., Sayma, A. I. and Imregun, M. (2008). A combined time and frequency domain approach for acoustic resonance prediction. Journal of Sound and Vibration, 311(3-5), pp. 1100-1113. doi: 10.1016/j.jsv.2007.10.006
Diego-Ayala, U., Martinez-Gonzalez, P., McGlashan, N. and Pullen, K. R. (2008). The mechanical hybrid vehicle: an investigation of a flywheel-based vehicular regenerative energy capture system. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 222(11), pp. 2087-2101. doi: 10.1243/09544070JAUTO677
Evangelou, S. A., Limebeer, D. J. N. and Tomas-Rodriguez, M. (2008). Influence of Road Camber on Motorcycle Stability. Journal Of Applied Mechanics, 75(6), 061020.. doi: 10.1115/1.2937140
Gavaises, M. (2008). Flow in valve covered orifice nozzles with cylindrical and tapered holes and link to cavitation erosion and engine exhaust emissions. International Journal of Engine Research, 9(6), doi: 10.1243/14680874JER01708
Giannadakis, E., Gavaises, M. and Arcoumanis, C. (2008). Modelling of cavitation in diesel injector nozzles. Journal of Fluid Mechanics, 616, pp. 153-193. doi: 10.1017/S0022112008003777
Guerrato, D., Nouri, J. M., Stosic, N., Arcoumanis, C. and Smith, I. K. (2008). Flow measurements in the discharge port of a screw compressor. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 222(E4), pp. 201-210. doi: 10.1243/09544089JPME200
Kaparias, I., Bell, M. G. H. and Belzner, H. (2008). A new measure of travel time reliability for in-vehicle navigation systems. Journal of Intelligent Transportation Systems: Technology, Planning, and Operations, 12(4), pp. 202-211. doi: 10.1080/15472450802448237
Mujic, E., Kovacevic, A., Stosic, N. and Smith, I. K. (2008). The influence of port shape on gas pulsations in a screw compressor discharge chamber. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 222(4), pp. 211-223. doi: 10.1243/09544089JPME205
Nouri, J. M., Guerrato, D., Stosic, N. and Arcoumanis, C. (2008). Axial Flow Characteristics within a Screw Compressor. HVAC&R Research, 14(2), pp. 259-274. doi: 10.1080/10789669.2008.10391007
Nouri, J. M. and Hockey, R. (2008). Flow characteristics of Newtonian and non-Newtonian fluids in a vessel stirred by a 60° pitched blade impeller. The International Journal of Multiphysics, 2(1), pp. 83-105. doi: 10.1260/175095408784300261
Ous, T. and Arcoumanis, C. (2008). Visualisation of water accumulation in the flow channels of PEMFC under various operating conditions. Journal of Power Sources, 187(1), pp. 182-189. doi: 10.1016/j.jpowsour.2008.10.072
Strotos, G., Gavaises, M., Theodorakakos, A. and Bergeles, G. (2008). Numerical investigation on the evaporation of droplets depositing on heated surfaces at low Weber numbers. International Journal of Heat and Mass Transfer, 51(7-8), pp. 1516-1529. doi: 10.1016/j.ijheatmasstransfer.2007.07.045
Triep, M., Brücker, C., Kerkhoffs, W., Schumacher, O. and Marseille, O. (2008). Investigation of the washout effect in a magnetically driven axial blood pump. Artificial Organs, 32(10), pp. 778-784. doi: 10.1111/j.1525-1594.2008.00630.x
Zifan, A., Liatsis, P., Kantartzis, P., Gavaises, M., Karcanias, N. and Katritsis, D. G. (2008). Automatic 3D Reconstruction of Coronary Artery Centerlines from Monoplane X-ray Angiogram Images. International Journal of Biological and Medical Sciences, 2(3), pp. 105-110.
Book Section
Kovacevic, A. (2008). Competence development in an international product design course. In: Proceedings DESIGN 2008, the 10th International Design Conference. (pp. 1383-1392). The Design Society. ISBN 978-953-6313-89-1
Thesis
Kaparias, I. (2008). Reliable dynamic in-vehicle navigation. (Unpublished Doctoral thesis, Imperial College)