Up a level |

Number of items: **48**.

Arjeneh, M., Pullen, K. R. and Etemad, S. (2013).
*Experimental study of radial low specific speed turbocompressor running in reverse as turboexpander*.
Paper presented at the 8th International Conference on Compressors and their Systems, 09-09-2013 - 10-09-2013, City University London, UK.

Buckney, D., Kovacevic, A. and Stosic, N. (2013).
Experimental validation of a geometry model for twin screw machines.
In:
*8th International Conference on Compressors and their Systems.*
(pp. 237-246). Cambridge: Woodhead Publishing.
ISBN 9781782421696

Chen, B., Riley, P. H., Abakr, Y. A., Pullen, K. R., Hann, D. B. and Johnson, C. (2013).
Design and development of a low-cost, electricity-generating cooking Score-Stove™.
*Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy*, 227(7),
pp. 803-813.
doi: 10.1177/0957650913498733

Chukanova, E., Stosic, N. and Kovacevic, A. (2013).
Numerical analysis of unsteady behaviour of a screw compressor plant system.
In:
*8th International Conference on Compressors and their Systems.*
(pp. 129-139). Cambridge: Woodhead Publishing.
ISBN 9781782421696

Dennis, R. and Pullen, K. R. (2013).
Development of a wood-fired cooking stove to incorporate a thermo-acoustic engine-generator unit.
*Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy*, 227(7),
pp. 740-751.
doi: 10.1177/0957650913498735

Dhand, A. and Pullen, K. R. (2013).
Review of Flywheel based Internal Combustion Engine Hybrid Vehicles.
*International Journal of Automotive Technology*, 14(5),
pp. 797-804.
doi: 10.1007/s12239-013-0088-x

Dhand, A. and Pullen, K. R. (2013).
Simulation based study of battery electric vehicle performance in real world cycles.
*International Journal of Electric and Hybrid Vehicles*, 5(4),
pp. 327-343.
doi: 10.1504/IJEHV.2013.059372

Eden, N., Kaparias, I., Tsakarestos, A., Gal-Tzur, A., Schmitz, P., Hoadley, S., Harrich, M. and Hauptmann, S. (2013).
*Using Key Performance Indicators for multi-criteria traffic management strategic decisions*.
Paper presented at the 9th European Intelligent Transport Systems Congress, 04-06-2013 - 07-06-2013, Dublin, Ireland.

Evangelou, S. A., Limebeer, D. J. N. and Tomas-Rodriguez, M. (2013).
Suppression of Burst Oscillations in Racing Motorcycles.
*Journal Of Applied Mechanics*, 80(1),
JAM-10.
doi: 10.1115/1.4006491

Evangelou, S. A., Limebeer, D. J. N. and Tomas-Rodriguez, M. (2013).
*Suppression of Burst Oscillations in Racing Motorcycles*.
Paper presented at the 49th IEEE Conference on Decision and Control, 15-12-2010 - 17-12-2010, Atlanta, USA.

Fazzolari, F. A., Banerjee, J. R. and Boscolo, M. (2013).
Buckling of composite plate assemblies using higher order shear deformation theory-An exact method of solution.
*Thin-Walled Structures*, 71,
pp. 18-34.
doi: 10.1016/j.tws.2013.04.017

Fazzolari, F. A., Boscolo, M. and Banerjee, J. R. (2013).
An exact dynamic stiffness element using a higher order shear deformation theory for free vibration analysis of composite plate assemblies.
*Composite Structures*, 96,
pp. 262-278.
doi: 10.1016/j.compstruct.2012.08.033

Gavaises, E., Marengo, M., Antonini, C., Nikolopoulos, N. and Malgarinos, I. (2013).
*Numerical investigation of droplet impingement onto hydrophobic and super-hydrophobic solid surfaces. The effect of Weber number and wettability*.
Paper presented at the ILASS 2013 - 25th Annual Conference on Liquid Atomization and Spray Systems, 1-4 Sept 2013, Chania, Crete.

Gavaises, E., Mirshahi, M., Nouri, J. M. and Yan, Y. (2013).
*Link between in-nozzle cavitation and jet spray in a gasoline multi-hole injector*.
Paper presented at the ILASS 2013 - 25th Annual Conference on Liquid Atomization and Spray Systems, 1-4 Sept 2013, Chania, Crete.

Gavaises, E., Rewse-Davies, Z., Nouri, J. M. and Arcoumanis, C. (2013).
*Near-Nozzle Instabilities in Gasoline Direct Injection Sprays*.
Paper presented at the ILASS 2013 - 25th Annual Conference on Liquid Atomization and Spray Systems, 1-4 Sept 2013, Chania, Crete.

Hess, D., Bruecker, C. ORCID: 0000-0001-5834-3020 and Nonn, T. (2013).
*Combined 3D Scanning PIV and Scanning LIF for flow and phase transfer measurements around a melting particle*.
Paper presented at the 10th International Symposium on Particle IMage Velocimetry, 01 - 03 July 2013, Delft, The Netherlands.

Kaparias, I., Bell, M. G. H., Dong, W., Sastrawinata, A., Singh, A., Wang, X. and Mount, B. (2013).
Analysis of pedestrian-vehicle traffic conflicts in street designs with elements of shared space.
*Transportation Research Record*, 2393,
pp. 21-30.
doi: 10.3141/2393-03

Kaparias, I., Bell, M. G. H., Singh, A., Dong, W., Sastrawinata, A., Wang, X. and Mount, B. (2013).
*Analysing the perceptions and behaviour of cyclists in street environments with elements of shared space*.
Paper presented at the 45th Annual Conference of the Universities’ Transport Study Group, January 2013, Oxford, UK.

Karathanassis, I. K., Papanicolaou, E., Belessiotis, V. and Bergeles, G. (2013).
Effect of secondary flows due to buoyancy and contraction on heat transfer in a two-section plate-fin heat sink.
*International Journal of Heat and Mass Transfer*, 61(1),
pp. 583-597.
doi: 10.1016/j.ijheatmasstransfer.2013.02.028

Karathanassis, I. K., Papanicolaou, E., Belessiotis, V. and Bergeles, G. (2013).
Multi-objective design optimization of a micro heat sink for Concentrating Photovoltaic/Thermal (CPVT) systems using a genetic algorithm.
*Applied Thermal Engineering*, 59(1),
pp. 733-744.
doi: 10.1016/j.applthermaleng.2012.06.034

Karathanassis, I. K., Papanicolaou, E., Belessiotis, V. and Bergeles, G. (2013).
Three-dimensional flow effects on forced convection heat transfer in a channel with stepwise-varying width.
*International Journal of Thermal Sciences*, 67,
pp. 177-191.
doi: 10.1016/j.ijthermalsci.2012.12.016

Kewlani, G., Vogiatzaki, K., Shanbhogue, S. and Ghoniem, A. F. (2013).
Validation study of large-eddy simulations of wake stabilized reacting flows using artificial flame thickening approaches.
*51st AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition 2013*,
doi: 10.2514/6.2013-169

Kim, S., Yan, Y., Nouri, J. M. and Arcoumanis, C. (2013).
Effects of intake flow and coolant temperature on the spatial fuel distribution in a direct-injection gasoline engine by PLIF technique.
*Fuel*, 106,
pp. 737-748.
doi: 10.1016/j.fuel.2012.10.002

Kovacevic, A. and Rane, S. (2013).
3D CFD analysis of a twin screw expander.
In:
*8th International Conference on Compressors and their Systems.*
(pp. 417-429). Cambridge: Woodhead Publishing.
ISBN 9781782421696

Kovacevic, A. and Stosic, N. (2013).
Grid Generation for Screw Compressors with Variable Geometry Rotors.
*International Journal of Aerospace and Lightweight Structures*, 3(2),
doi: 10.3850/S2010428613000603

Lockett, R. D., Ball, D. and Robertson, G. (2013).
Experimental cross-correlation Nitrogen Q-branch CARS Thermometry in a Spark Ignition Engine.
*Optics and Lasers in Engineering*, 51(7),
pp. 929-943.
doi: 10.1016/j.optlaseng.2013.02.010

Lockett, R. D., Liverani, L., Thaker, D., Jeshani, M. and Tait, N. P. (2013).
The characterisation of diesel nozzle flow using high speed imaging of elastic light scattering.
*Fuel*, 106,
pp. 605-616.
doi: 10.1016/j.fuel.2012.10.065

Marchi, A., Yan, Y., Nouri, J. M. and Arcoumanis, C. (2013).
*PIV Investigation on Flows Induced by Fuel Sprays from an Outwards Opening Pintle Injector for GDI engines*.
Paper presented at the ILASS 2013 - 25th Annual Conference on Liquid Atomization and Spray Systems, 1-4 Sept 2013, Chania, Crete.

Marichal, N., Tomas-Rodriguez, M., Hernandez, A., Castillo, S. and Campoy, P. (2013).
Vibration reduction for vision systems on board UAV using a neuro-fuzzy controller.
*Journal of Vibration and Control*, 20(15),
pp. 2243-2253.
doi: 10.1177/1077546313479632

Mikulich, V. and Brücker, C. (2013).
Flow and motion behavior of particle suspensions in shear flow over a rough surface.
*WIT Transactions on Engineering Sciences*, 79,
pp. 263-272.
doi: 10.2495/MPF130221

Mitroglou, N. and Gavaises, M. (2013).
Mapping of cavitating flow regimes in injectors for medium-/heavy-duty diesel engines.
*International Journal of Engine Research*, 14(6),
pp. 590-605.
doi: 10.1177/1468087413500491

Omidyeganeh, M. and Piomelli, U. (2013).
Large-eddy simulation of three-dimensional dunes in a steady, unidirectional flow. Part 1. Turbulence statistics.
*Journal of Fluid Mechanics*, 721,
pp. 454-483.
doi: 10.1017/jfm.2013.36

Omidyeganeh, M. and Piomelli, U. (2013).
Large-eddy simulation of three-dimensional dunes in a steady, unidirectional flow. Part 2. Flow structures.
*Journal of Fluid Mechanics*, 734,
pp. 509-534.
doi: 10.1017/jfm.2013.499

Omidyeganeh, M., Piomelli, U., Christensen, K.T. and Best, J.L. (2013).
Large eddy simulation of interacting barchan dunes in a steady, unidirectional flow.
*JOURNAL OF GEOPHYSICAL RESEARCH-EARTH SURFACE*, 118(4),
doi: 10.1002/jgrf.20149

Ous, T. and Arcoumanis, C. (2013).
Degradation aspects of water formation and transport in Proton Exchange Membrane Fuel Cell: A review.
*Journal of Power Sources*, 240,
pp. 558-582.
doi: 10.1016/j.jpowsour.2013.04.044

Pagani, A., Boscolo, M., Banerjee, J. R. and Carrera, E. (2013).
Exact dynamic stiffness elements based on one-dimensional higher-order theories for free vibration analysis of solid and thin-walled structures.
*Journal of Sound and Vibration*, 332(23),
pp. 6104-6127.
doi: 10.1016/j.jsv.2013.06.023

Pascu, M., Heiyanthuduwage, M. A., Mounoury, S., Cooke, G.M.E. and Kovacevic, A. (2013).
A study on the influence of the suction arrangement on the performance of twin screw compressors.
In:
*ASME 2013 International Mechanical Engineering Congress and Exposition.*
Fluids Engineering Systems and Technologies, 7 A.
. American Society of Mechanical Engineers (ASME).
ISBN 978-0-7918-5631-4

Rane, S., Kovacevic, A., Stosic, N. and Kethidi, M. (2013).
CFD grid generation and analysis of screw compressor with variable geometry rotors.
In:
*8th International Conference on Compressors and their Systems.*
(pp. 601-612). Cambridge: Woodhead Publishing.
ISBN 9781782421696

Rane, S., Kovacevic, A., Stosic, N. and Kethidi, M. (2013).
Grid deformation strategies for CFD analysis of screw compressors.
*International Journal of Refrigeration*, 36(7),
pp. 1883-1893.
doi: 10.1016/j.ijrefrig.2013.04.008

Revestido Herrero, E., Tomas-Rodriguez, M. and Gonzalez, F. J. V. (2013).
Iterated Nonlinear Control of Ship's Manoeuvring Models.
*2013 IEEE 52nd Annual Conference on Decision and Control (CDC)*,
pp. 6168-6175.
doi: 10.1109/CDC.2013.6760864

Riziotis, V. A., Katsaounis, G. M., Papadakis, G., Voutsinas, S. G., Bergeles, G. and Tzabiras, G. D. (2013).
Numerical and experimental analysis of the hydroelastic behavior of purse seine nets.
*Ocean Engineering*, 58,
pp. 88-105.
doi: 10.1016/j.oceaneng.2012.09.022

Sanchez, T., Dennis, R. and Pullen, K. R. (2013).
Cooking and lighting habits in rural Nepal and Uganda.
*Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy*, 227(7),
pp. 727-739.
doi: 10.1177/0957650913498872

Skupsch, C. and Brücker, C. (2013).
Multiple-plane particle image velocimetry using a light-field camera.
*Optics Express*, 21(2),
pp. 1726-1740.
doi: 10.1364/OE.21.001726

Stosic, N., Smith, I. K., Chukanova, E. and Kovacevic, A. (2013).
Experimental Investigation and Numerical Modelling of Dynamic Behaviour of Screw Compressor Plant.
*Universal Journal of Engineering Science*, 1,
pp. 68-79.
doi: 10.13189/ujes.2013.010302

Tomas-Rodriguez, M. and Banks, S. P. (2013).
An iterative approach to eigenvalue assignment for nonlinear systems.
*International Journal of Control*, 86(5),
pp. 883-892.
doi: 10.1080/00207179.2013.765037

Trozzi, V., Gentile, G., Bell, M. G. H. and Kaparias, I. (2013).
Dynamic user equilibrium in public transport networks with passenger congestion and hyperpaths.
*Transportation Research Part B: Methodological*, 57,
pp. 266-285.
doi: 10.1016/j.trb.2013.06.011

Trozzi, V., Kaparias, I., Bell, M. G. H. and Gentile, G. (2013).
A dynamic route choice model for public transport networks with boarding queues.
*Transportation Planning and Technology*, 36(1),
pp. 44-61.
doi: 10.1080/03081060.2012.745720

Zhang, Q. and He, L. (2013).
Tip-shaping for HP turbine blade aerothermal performance management.
*Journal of Turbomachinery*, 135(3),
doi: 10.1115/1.4007896