City Research Online

Items where Schools and Departments is "School of Mathematics, Computer Science & Engineering > Engineering > Mechanical Engineering & Aeronautics" and Year is 2016

Up a level
Export as [feed] RSS 2.0 [feed] RSS
Group by: Authors | Publication Type | No Grouping
Number of items: 68.

Article

Axtmann, G., Hegner, F., Brücker, C. and Rist, U. (2016). Investigation and prediction of the bending of single and tandem pillars in a laminar cross flow. Journal of Fluids and Structures, 66, pp. 110-126. doi: 10.1016/j.jfluidstructs.2016.07.017

Axtmann, G., Rist, U., Hegner, F. and Bruecker, C. (2016). Numerical investigation of the bending of slenderwall-mounted cylinders in low reynolds number flow. Notes on Numerical Fluid Mechanics and Multidisciplinary Design, 132, pp. 191-201. doi: 10.1007/978-3-319-27279-5_17

Banerjee, J. R. (2016). Modal analysis of sailplane and transport aircraft wings using the dynamic stiffness method. Journal of Physics: Conference Series, 721, .012005. doi: 10.1088/1742-6596/721/1/012005

Bruecker, C. (2016). Measurement of near-wall 3D flow velocity from wave-guiding micro-pillars. Optics Express, 24(19), pp. 21407-21414. doi: 10.1364/OE.24.021407

Bruecker, C., Kirmse, C. and Triep, M. (2016). Feedback of the Glottal Jet Flow with Supraglottal Wall Oscillations. Acta Acustica united with Acustica, 102(2), pp. 240-243. doi: 10.3813/AAA.918940

Brücker, C., Schlegel, D. and Triep, M. (2016). Feather Vibration as a Stimulus for Sensing Incipient Separation in Falcon Diving Flight. Natural Resources, 07(07), pp. 411-422. doi: 10.4236/nr.2016.77036

Buckney, D., Kovacevic, A. and Stosic, N. (2016). Design and evaluation of rotor clearances for oil-injected screw compressors. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 231(1), pp. 26-37. doi: 10.1177/0954408916660342

Buhl, S., Gleiss, F., Köhler, M., Hartmann, F., Messig, D., Bruecker, C. and Hasse, C. (2016). A combined numerical and experimental study of the 3D tumble structure and piston boundary layer development during the intake stroke of a gasoline engine. Flow, Turbulence and Combustion,

Castillo-Rivera, S. and Tomas-Rodriguez, M. (2016). Helicopter nonlinear aerodynamics modelling using VehicleSim. Advances in Engineering Software, 100, pp. 252-265. doi: 10.1016/j.advengsoft.2016.08.001

Dhand, A. and Pullen, K. R. (2016). Analysis of Dual Mode Continuously Variable Transmission for Flywheel Energy Storage Systems. SAE Technical Papers, .2016_01_1177. doi: 10.4271/2016-01-1177

Favier, J., Revell, A. and Pinelli, A. (2016). Fluid Structure Interaction of Multiple Flapping Filaments Using Lattice Boltzmann and Immersed Boundary Methods. Advances in fluid structure interaction, 133, pp. 167-178. doi: 10.1007/978-3-319-27386-0_10

Ison, S. and Kaparias, I. (2016). Universities' Transport Study Group UK Annual Conference 2015. Transportation Planning and Technology, 39(1), pp. 1-2. doi: 10.1080/03081060.2015.1113664

Javdani, S., Fabian, M., Carlton, J., Sun, T. and Grattan, K. T. V. (2016). Underwater free-vibration analysis of full-scale marine propeller using a Fibre Bragg Grating-based sensor system. IEEE Sensors Journal, 16(4), pp. 946-953. doi: 10.1109/JSEN.2015.2490478

Kabir, I. R., Yin, D. and Naher, S. (2016). Two dimensional finite element thermal model of laser surface glazing for H13 tool steel. AIP Conference Proceedings, 1769(1), p. 110003. doi: 10.1063/1.4963512

Karathanassis, I. K., Koukouvinis, P. and Gavaises, M. (2016). Topology and distinct features of flashing flow in an injector nozzle. Atomization and Sprays, 26(12), pp. 1307-1336. doi: 10.1615/AtomizSpr.2016016510

Kassem, H. I., Liu, X. and Banerjee, J. R. (2016). Transonic flutter analysis using a fully coupled density based solver for inviscid flow. Advances in Engineering Software, 95, pp. 1-6. doi: 10.1016/j.advengsoft.2016.01.012

Koukouvinis, P., Gavaises, M., Georgoulas, A. and Marengo, M. (2016). Compressible simulations of bubble dynamics with central-upwind schemes. International Journal of Computational Fluid Dynamics, 30(2), pp. 129-140. doi: 10.1080/10618562.2016.1166216

Koukouvinis, P., Gavaises, M., Li, J. and Wang, L. (2016). Large Eddy Simulation of Diesel injector including cavitation effects and correlation to erosion damage. Fuel, 175, pp. 26-39. doi: 10.1016/j.fuel.2016.02.037

Koukouvinis, P., Gavaises, M., Supponen, O. and Farhat, M. (2016). Numerical simulation of a collapsing bubble subject to gravity. Physics of Fluids, 28(3), doi: 10.1063/1.4944561

Koukouvinis, P., Gavaises, M., Supponen, O. and Farhat, M. (2016). Simulation of bubble expansion and collapse in the vicinity of a free surface. Physics of Fluids, 28(5), 052103.. doi: 10.1063/1.4949354

Liu, J., Khan, U., Coleman, J., Fernandez, B., Rodriguez, P., Naher, S. and Brabazon, B. (2016). Graphene Oxide and Graphene Nanosheet Reinforced Aluminium Matrix Composites: powder synthesis and prepared composite characteristics. Materials & Design, 94, pp. 87-94. doi: 10.1016/j.matdes.2016.01.031

Liu, X. and Banerjee, J. R. (2016). Free vibration analysis for plates with arbitrary boundary conditions using a novel spectral-dynamic stiffness method. Computers and Structures, 164, pp. 108-126. doi: 10.1016/j.compstruc.2015.11.005

Liu, X., Kassem, H. I. and Banerjee, J. R. (2016). An exact spectral dynamic stiffness theory for composite plate-like structures with arbitrary non-uniform elastic supports, mass attachments and coupling constraints. Composite Structures, 142, pp. 140-154. doi: 10.1016/j.compstruct.2016.01.074

Lockett, R. D., Fatmi, Z., Kuti, O. and Price, R. (2016). An Optical Characterization of the Effect of High-Pressure Hydrodynamic Cavitation on Diesel. SAE Technical Papers, pp. 2014-01.

Lockett, R. D., Jeshani, M., Makri, K. and Price, R. (2016). An Optical Characterization of Atomization in Non-Evaporating Diesel Sprays. SAE Technical Papers, 2016-01-0865. doi: 10.4271/2016-01-0865

Lun, Y. H., Carlton, J. and Bichou, K. (2016). Examining the economic impact of transport complex economies. Journal of Shipping and Trade, 1(1), doi: 10.1186/s41072-016-0005-3

Ma, H., Wang, Z., Wang, L., Zhang, Q., Yang, Z. and Bao, Y. (2016). Ramp heating in high-speed transient thermal measurement with reduced uncertainty. Journal of Propulsion and Power, 32(5), pp. 1190-1198. doi: 10.2514/1.B35803

Malgarinos, I., Nikolopoulos, N. and Gavaises, M. (2016). A numerical study on droplet-particle collision dynamics. International Journal of Heat and Fluid Flow, doi: 10.1016/j.ijheatfluidflow.2016.06.010

Mamouei, M. H., Kaparias, I. and Halikias, G. (2016). A quantitative approach to behavioural analysis of drivers in highways using particle filtering. Transportation Planning and Technology, 39(1), doi: 10.1080/03081060.2015.1108084

Mitroglou, N., Lorenzi, M., Santini, M. and Gavaises, M. (2016). Application of X-ray micro-computed tomography on high-speed cavitating diesel fuel flows. Experiments in Fluids, 57(11), p. 175. doi: 10.1007/s00348-016-2256-z

Panagopoulos, I., Atkin, C.J. and Sikora, I. (2016). Lean Six-Sigma in Aviation Safety: An implementation guide for measuring aviation system’s safety performance. Journal of Safety Studies, 2(2), doi: 10.5296/jss.v2i2.10438

Papadopoulos, Konstantinos, Gavaises, M., Pantos, I., Katritsis, D. G. and Mitroglou, N. (2016). Derivation of flow related risk indices for stenosed left anterior descending coronary arteries with the use of computer simulations. Medical Engineering & Physics, 38(9), pp. 929-939. doi: 10.1016/j.medengphy.2016.05.016

Pinelli, A., Omidyeganeh, M., Brücker, C., Revell, A., Sarkar, A. and Alinovi, E. (2016). The PELskin project: part IV—control of bluff body wakes using hairy filaments. Meccanica, doi: 10.1007/s11012-016-0513-0

Ponitz, B., Sastuba, M. and Bruecker, C. (2016). 4D visualization study of a vortex ring life cycle using modal analyses. Journal of Visualization, 19(2), pp. 237-259. doi: 10.1007/s12650-015-0314-x

Qian, W., Rosic, B., Zhang, Q. and Khanal, B. (2016). Influence of fluid temperature gradient on the flow within the shaft gap of a PLR pump. Heat and Mass Transfer/Waerme- und Stoffuebertragung, 52(3), pp. 469-481. doi: 10.1007/s00231-015-1570-y

Read, M. G., Smith, I. K., Stosic, N. and Kovacevic, A. (2016). Comparison of organic rankine cycle systems under varying conditions using turbine and twin-screw expanders. Energies, 9(8), 614.. doi: 10.3390/en9080614

Revell, A., O Connor, J., Sarkar, A., Li, C., Favier, J., Kamps, L. and Brücker, C. (2016). The PELskin project: part II—investigating the physical coupling between flexible filaments in an oscillating flow. Meccanica, doi: 10.1007/s11012-016-0525-9

Rosti, M. E., Kamps, L., Bruecker, C., Omidyeganeh, M. and Pinelli, A. (2016). The PELskin project-part V: towards the control of the flow around aerofoils at high angle of attack using a self-activated deployable flap. Meccanica, doi: 10.1007/s11012-016-0524-x

Rosti, M. E., Omidyeganeh, M. and Pinelli, A. (2016). Direct numerical simulation of the flow around an aerofoil in ramp-up motion. Physics of Fluids, 28(2), 025106. doi: 10.1063/1.4941529

Strotos, G., Malgarinos, I., Nikolopoulos, N. and Gavaises, M. (2016). Aerodynamic breakup of an n-decane droplet in a high temperature gas environment. Fuel, 185, pp. 370-380. doi: 10.1016/j.fuel.2016.08.014

Strotos, G., Malgarinos, I., Nikolopoulos, N. and Gavaises, M. (2016). Numerical investigation of aerodynamic droplet breakup in a high temperature gas environment. Fuel, 181, pp. 450-462. doi: 10.1016/j.fuel.2016.04.126

Strotos, G., Malgarinos, I., Nikolopoulos, N. and Gavaises, M. (2016). Predicting droplet deformation and breakup for moderate Weber numbers. International Journal of Multiphase Flow, 85, pp. 96-109. doi: 10.1016/j.ijmultiphaseflow.2016.06.001

Strotos, G., Malgarinos, I., Nikolopoulos, N. and Gavaises, M. (2016). Predicting the evaporation rate of stationary droplets with the VOF methodology for a wide range of ambient temperature conditions. International Journal of Thermal Sciences, 109, pp. 253-262. doi: 10.1016/j.ijthermalsci.2016.06.022

Vidakovic, M., Armakolas, I., Sun, T., Carlton, J. and Grattan, K. T. V. (2016). Fibre Bragg Grating-based Acoustic Sensor Array for Improved Condition Monitoring of Marine Lifting Surfaces. Journal of Lightwave Technology, 34(18), pp. 4336-4342. doi: 10.1109/JLT.2016.2601122

Vidakovic, M., McCague, C., Armakolas, I., Sun, T., Carlton, J. and Grattan, K. T. V. (2016). Fibre Bragg Grating-based Cascaded Acoustic Sensors for Potential Marine Structural Condition Monitoring. Journal of Lightwave Technology, 34(19), pp. 4473-4478. doi: 10.1109/JLT.2016.2587161

White, M. ORCID: 0000-0002-7744-1993 and Sayma, A. I. (2016). Improving the economy-of-scale of small organic rankine cycle systems through appropriate working fluid selection. Applied Energy, 183, pp. 1227-1239. doi: 10.1016/j.apenergy.2016.09.055

Yan, D., Kovacevic, A., Tang, Q. and Zhang, W. H. (2016). Numerical modelling of twin-screw pumps based on computational fluid dynamics. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, doi: 10.1177/0954406216670684

Book Section

Atkin, C. J. and Gowree, E. R. (2016). Staggered Three-dimensional Cavities as a Possible Method for Skin Friction Drag Reduction. In: Proceedings of the 30th International Council of the Aeronautical Sciences. . Bonn, Austria: The International Council of the Aeronautical Sciences. ISBN 978-3-932182-85-3

Crowley, B.J. and Atkin, C.J. (2016). Investigation of the discrete effects of suction in large scale arrays for Laminar flow control. In: 34th AIAA Applied Aerodynamics Conference. . Reston, VA, United States: American Institute of Aeronautics and Astronautics. ISBN 9781624104374

Kitade, S. and Pullen, K. R. (2016). Flywheel. In: Hashmi, S. (Ed.), Reference Module in Materials Science and Materials Engineering. . Elsevier. ISBN 0128035811

Mujic, E., Stosic, N., Kovacevic, A. and Smith, I. K. (2016). Noise Control by Suppression of Gas Pulsation in Screw Compressors. In: Ahmed, N. (Ed.), Advances in Noise Analysis, Mitigation and Control. . InTech. ISBN 978-953-51-2675-1

Placidi, M., van Bokhorst, E. and Atkin, C. J. (2016). On the effect of discrete roughness on the growth of crossflow instability in very low turbulence environment. In: 8th AIAA Flow Control Conference. . Reston, VA, United States: American Institute of Aeronautics and Astronautics. ISBN 9781624104329

Read, M. G., Smith, I. K. and Stosic, N. (2016). Fundamental Investigation Of Whole-Life Power Plant Performance For Enhanced Geothermal Systems. In: 23rd International Compressor Engineering Conference at Purdue 2016. . Red Hook, NY: Curran Associates, Inc. ISBN 9781510828728

van Bokhorst, E., Placidi, M. and Atkin, C.J. (2016). The influence of the spatial frequency content of discrete roughness distributions on the development of the crossflow instability. In: 8th AIAA Flow Control Conference. . Reston, VA, United States: American Institute of Aeronautics and Astronautics. ISBN 9781624104329

Conference or Workshop Item

Alderman, J., Rolston, S., Gaster, M. and Atkin, C.J. (2016). A method of reducing the drag of transport wings. Paper presented at the 34th AIAA Applied Aerodynamics Conference, 13-17 June 2016, Washington D. C., USA.

Bianchi, G., Kovacevic, A., Cipollone, R., Murgia, S. and Contaldi, G. (2016). Development of a general numerical methodology for CFD analyses in sliding vane machines and application on a mid-size oil injected air compressor. Paper presented at the 23rd International Compressor Engineering Conference, 11-14 Jul 2016, Indiana, USA.

Bruecker, C. ORCID: 0000-0001-5834-3020, Wagner, R. and Koehler, M. (2016). Measurements of wall-shear stress fields on the piston crown in an IC engine flow using fluorescent labelled micro-pillar imaging. Paper presented at the 18th International Symposium on Applications of Laser Techniques to Fluid Mechanics, 4-7 Jul 2016, Lisbon, Portugal.

Chukanova, E., Stosic, N. and Kovacevic, A. ORCID: 0000-0002-8732-2242 (2016). Modelling and Experimental Investigation of Compressor Plant Operation Under Unsteady Conditions. In: ASME 2015 International Mechanical Engineering Congress and Exposition, Volume 4A: Dynamics, Vibration, and Control. . ASME. ISBN 978-0-7918-5739-7

Corlho, L., Placidi, M., Atkin, C.J. and Sun, Z. (2016). Experimental Investigation of a Handley Page Triple Slotted Aerofoil. Paper presented at the 2016 Applied Aerodynamics Conference: Evolution & Innovation Continues - The Next 150 Years of Concepts, Design and Operations, 19-21 July 2016, Bristol, UK.

Fumarola, I., Gaster, M. and Atkin, C.J. (2016). Experimental investigation of the vorticity amplification on a swept wing with a blunt leading edge. Paper presented at the 52nd 3AF International Conference on Applied Aerodynamics, 27-29 Mar 2017, Lyon, France.

Gowree, E. R. and Atkin, C. J. (2016). On the excitation of Tollmien-Schlichting waves due to surface vibration. Paper presented at the 52nd 3AF International Conference on Applied Aerodynamics, 27-29 Mar 2017, Lyon, France.

Kovacevic, A. and Stosic, N. (2016). CFD Analysis of Oil Flooded Twin Screw Compressors. Paper presented at the 23rd International Compressor Engineering Conference, 11-14 Jul 2016, Indiana, USA.

Makri, K., Lockett, R. D., Jeshani, M. and Price, R. (2016). The effect of cavitation on atomization in non-evaporating diesel sprays. Paper presented at the ILASS – Europe 2016, 27th Annual Conference on Liquid Atomization and Spray Systems, 4-7 Sep 2016, Brighton, UK.

Stosic, N., Rane, S., Kovacevic, A. ORCID: 0000-0002-8732-2242 and Smith, I. K. ORCID: 0000-0003-1524-9880 (2016). Screw Rotor Profiles of Variable Lead Vacuum and Multiphase Machines and Their Calculation Models. In: ASME 2016 International Mechanical Engineering Congress and Exposition, Volume 6A: Energy. . ASME. ISBN 978-0-7918-5058-9

Sun, Z. and Bruecker, C. (2016). PIV Study of Flow Separations at a Forward-Facing Step using Long-Range Microscope. Paper presented at the 2016 Applied Aerodynamics Conference: Evolution & Innovation Continues - The Next 150 Years of Concepts, Design and Operations, 19-21 Jul 2016, Bristol, UK.

Sun, Z., Bruecker, C. and Pointz, B. (2016). Transition of A Vortex Ring Visualized by 3D Scanning TomoPIV. Paper presented at the 18th International Symposium on Applications of Laser Techniques to Fluid Mechanics, 4-7 Jul 2016, Lisbon, Portugal.

Sun, Z., Pointz, B. and Bruecker, C. ORCID: 0000-0001-5834-3020 (2016). Transition of a vortex ring measured by 3D scanning Tomo-PIV. Paper presented at the 18th International Symposium on Applications of Laser Techniques to Fluid Mechanics, 4-7 Jul 2016, Lisbon, Portugal.

Vidovics, B., Vukasinovic, N., Pavkovic, N. and Kovacevic, A. ORCID: 0000-0002-8732-2242 (2016). Development of methodology for distributed collaborative design environment. In: Proceedings of the 18th International Conference on Engineering and Product Design Education (E&PDE16), Design Education: Collaboration and Cross-Disciplinarity. (pp. 58-63). Glasgow: The Design Society. ISBN 9781904670780

This list was generated on Sun May 26 04:26:28 2019 UTC.