Up a level |

Group by: Type | No Grouping

Number of items: **7**.

Karathanassis, I. K. ORCID: 0000-0001-9025-2866, Papanicolaou, E., Belessiotis, V. & Bergeles, G. (2019).
Dynamic simulation and exergetic optimization of a Concentrating Photovoltaic/ Thermal (CPVT) system.
*Renewable Energy*, 135,
pp. 1035-1047.
doi: 10.1016/j.renene.2018.12.085

Karathanassis, I. K., Papanicolaou, E., Belessiotis, V. & Bergeles, G. (2017).
Design and experimental evaluation of a parabolic-trough concentrating photovoltaic/thermal (CPVT) system with high-efficiency cooling.
*Renewable Energy*, 101,
pp. 467-483.
doi: 10.1016/j.renene.2016.09.013

Karathanassis, I. K., Papanicolaou, E., Belessiotis, V. & Bergeles, G. (2015).
Experimental and numerical evaluation of an elongated plate-fin heat sink with three sections of stepwise varying channel width.
*International Journal of Heat and Mass Transfer*, 84,
pp. 16-34.
doi: 10.1016/j.ijheatmasstransfer.2014.12.013

Karathanassis, I. K., Papanicolaou, E., Belessiotis, V. & Bergeles, G. (2014).
Flow and Temperature Fields in Cooling Devices with Embedded Serpentine Tubes.
*Numerical Heat Transfer, Part A: Applications*, 66(4),
pp. 349-378.
doi: 10.1080/10407782.2014.884864

Karathanassis, I. K., Papanicolaou, E., Belessiotis, V. & Bergeles, G. (2013).
Three-dimensional flow effects on forced convection heat transfer in a channel with stepwise-varying width.
*International Journal of Thermal Sciences*, 67,
pp. 177-191.
doi: 10.1016/j.ijthermalsci.2012.12.016

Karathanassis, I. K., Papanicolaou, E., Belessiotis, V. & Bergeles, G. (2013).
Effect of secondary flows due to buoyancy and contraction on heat transfer in a two-section plate-fin heat sink.
*International Journal of Heat and Mass Transfer*, 61(1),
pp. 583-597.
doi: 10.1016/j.ijheatmasstransfer.2013.02.028

Karathanassis, I. K., Papanicolaou, E., Belessiotis, V. & Bergeles, G. (2013).
Multi-objective design optimization of a micro heat sink for Concentrating Photovoltaic/Thermal (CPVT) systems using a genetic algorithm.
*Applied Thermal Engineering*, 59(1),
pp. 733-744.
doi: 10.1016/j.applthermaleng.2012.06.034