A

Aboukhedr, M. (2019). Two-Phase Flow Simulation in Porous Media Geometries Reconstructed from micro CT Data : Application to Fluid Transport at Low Capillary Numbers. (Unpublished Doctoral thesis, City, University of London)

Abu Shousha, R. I. (1991). Hot ductility of steels. (Unpublished Doctoral thesis, City, University of London)

Amiryar, M. E. (2019). An assessment of flywheel storage for efficient provision of reliable power for residential premises in islanded operation. (Unpublished Doctoral thesis, City, University of London)

Ananthapuvirajah, A. (2019). Free vibration and flutter behaviour of metallic and composite aircraft using DSM and developments of dynamic stiffness matrices for structural elements with applications. (Unpublished Doctoral thesis, City, University of London)

Armakolas, I. (2018). Cavitation erosion fracture mechanisms and their detection in ship rudders. (Unpublished Doctoral thesis, City, University of London)

B

Babazadehrokni, H. B. (2019). Thermo-physical property models for well-characterized hydrocarbon mixtures and fuels and effect of composition on fluid properties up to 4,500 bar. (Unpublished Doctoral thesis, City, University of London)

Backer Dirks, T. (2018). On the controllability of saturating crossflow vortices. (Unpublished Doctoral thesis, City, University of London)

Banerjee, J. R. (2015). Advances in structural dynamics, aeroelasticity and material science. (Unpublished Doctoral thesis, City University London)

Beyer, U. (1992). Use of vane and air jet vortex generators in a thrust augmenting ejector. (Unpublished Doctoral thesis, City, University of London)

Brunhart, M. (2020). Cavitation and the application of methods for erosion prediction in high pressure fuel injection systems. (Unpublished Doctoral thesis, City, University of London)

C

Cal, A. A. (1992). A unified approach to flutter, dynamic stability and response analysis of high aspect ratio aircraft. (Unpublished Doctoral thesis, City, University of London)

Cattell, R. (2019). An experimental investigation in to a highly forward swept, low specific speed turbocompressor. (Unpublished Doctoral thesis, City, University of London)

Ciofalo, M. (1992). Large-eddy simulation of turbulent flows with heat transfer in simple and complex geometries. (Unpublished Doctoral thesis, City, University of London)

Cook, A. H. (1995). The joining of new to old dental amalgam. (Unpublished Doctoral thesis, City, University of London)

Crowley, B. J. (2020). High and low frequency dominated boundary layer transition through widely spaced discrete suction perforations. (Unpublished Doctoral thesis, City, University of London)

D

Dasari, BhagyaLakshmi (2019). Production and characterisation of graphene oxide reinforced aluminium matrix composites. (Unpublished Doctoral thesis, City, University of London)

Dionysios, S. (2020). Direct numerical simulation of secondary droplet breakup in fuel sprays. (Unpublished Doctoral thesis, City, University of London)

E

El-Bardisi, M. M. M. (1992). Reduction of wind turbine noise through design. (Unpublished Doctoral thesis, City, University of London)

Elshalakani, M. O. M. E (2020). Investigation of biomimetic systems and their applications in robotic solutions in fluids: using deep learning and vision-based control. (Unpublished Doctoral thesis, City, University of London)

F

Fatmi, Zeeshan (2018). Optical and chemical characterisation of the effects of high-pressure hydrodynamic cavitation on diesel fuel. (Unpublished Doctoral thesis, City, University of London)

Fostiropoulos, S. R. (2020). Heat transfer and breakup of emulsified fuel droplets. (Unpublished Doctoral thesis, City, University of London)

Fumarola, I. (2019). Effect of Freestream Turbulence on the Boundary Layer on a Swept Leading Edge. (Unpublished Doctoral thesis, City, University of London)

G

Gomez Santos, E. (2020). Simulation and numerical modelling of three-phase flow in automotive high-pressure fuel injectors. (Unpublished Doctoral thesis, City, University of London)

I

Innes, F. (1995). An experimental investigation into the use of vortex generators to improve the performance of a high lift system. (Unpublished Doctoral thesis, City, University of London)

K

Kabir, I. R. (2019). Modelling of Laser Surface Glazing for Metallic Materials by Finite Element Method. (Unpublished Doctoral thesis, City, University of London)

Kaparias, I. (2004). Bestimmung der Verkehrsqualität auf Streckenabschnitten von Hauptverkehrsstraßen – Untersuchungen zur praktischen Anwendbarkeit des Verfahrens nach Baier an ausgewählten Streckenabschnitten. (Unpublished Masters thesis, Aachen University)

Kaparias, I. (2008). Reliable dynamic in-vehicle navigation. (Unpublished Doctoral thesis, Imperial College)

Kassem, H. I. (2017). Flutter prediction of metallic and composite wings using coupled DSM-CFD models in transonic flow. (Unpublished Doctoral thesis, City, University of London)

Kovacevic, A. (2002). Three dimensional numerical analysis for flow prediction in positive displacement screw machines. (Unpublished Doctoral thesis, City University London)

Kovolos, K. (2021). Assessment of transient effects in diesel injectors affected by fouling and cavitation erosion. (Unpublished Doctoral thesis, City, University of London)

Kumar, N. (2020). Non-Newtonian coupled field analysis of blood flow in normal and stenosed carotid artery with varying haemodynamic parameters. (Unpublished Doctoral thesis, City, University of London)

Kyriazis, N. (2018). Simulation of cavitation using compressible flow solvers. (Unpublished Doctoral thesis, City, University of London)

L

Laria, D (2020). Techno-economic assessment of a solar dish micro gas turbne system. (Unpublished Doctoral thesis, City, University of London)

Laria, D. (2019). Techno-economic assessment of a solar dish micro gas turbine system. (Unpublished Doctoral thesis, City, University of London)

Li, Q. (2020). Experimental study of flow pulse interacting with walls. (Unpublished Doctoral thesis, City, University of London)

Lockett, John Francis (1987). Heat Transfer from Roughened Surfaces using Laser Interferometry. (Unpublished Doctoral thesis, City, University of London)

M

Mahmoud, M. (2022). Investigation on coupling Organic Rankine Cycle with a shallow ground-based cooling system. (Unpublished Doctoral thesis, City, University of London)

Mehrabi, H. A. (1993). Influence of tempering and normalising on the structure and properties of low alloy and plain carbon-manganese steels. (Unpublished Doctoral thesis, City, University of London)

Miao, X. (2018). Turbine end-wall aerothermal management with engineered surface structure. (Unpublished Doctoral thesis, City, University of London)

Mirshahi, M. (2020). In-nozzle flow spray characteristics in gasoline multi-hole injectors. (Unpublished Doctoral thesis, City, University of London)

Monti, A (2019). High-fidelity simulations of fully submerged, rigid canopy flows. (Unpublished Doctoral thesis, City, University of London)

Murali-Girija, M. (2020). Numerical simulation of cavitation in the presence of non-condensable gas using a three-phase model. (Unpublished Doctoral thesis, City, University of London)

Muthuramalingam, M. (2020). Investigation of biomimetic fish scale arrays and leading-edge serrations on base flow modification for transition delay. (Unpublished Doctoral thesis, City, University of London)

N

Naseri, Homa (2019). Modelling of nozzle cavitation in newtonian and viscoelastic fluids. (Unpublished Doctoral thesis, City, University of London)

Nassar, A-A. M. (1992). The strength and impact behaviour of intercritically annealed C-Mn-Al-Nb steels. (Unpublished Doctoral thesis, City, University of London)

Nazeer, Y. H. (2020). Numerical modelling of in-nozzle flow transient effects and fuel atomization characteristics of an industrial atomizer. (Unpublished Doctoral thesis, City, University of London)

Nykteri, G. (2021). Development of a multiscale two-fluid approach with application to droplet dynamics. (Unpublished Doctoral thesis, City, University of London)

P

Pearce, W. (1995). A wind tunnel investigation of the internal pressure dynamics of a single-cell building fitted with a flexible roof and a dominant opening. (Unpublished Doctoral thesis, City, University of London)

Q

Qaban, A. (2019). The effect of alloying composition and cooling rate on the hot ductility of TWIP steel and mechanical properties of hot rolled HSLA steel. (Unpublished Doctoral thesis, City, University of London)

R

Rane, S. (2015). Grid Generation and CFD Analysis of Variable Geometry Screw Machines. (Unpublished Doctoral thesis, City University London)

Rodriguez Fernandez, Carlos (2019). Supercritical, transcritical and subcritical real-fluid mixing at high-pressure conditions using the PC-SAFT EoS. (Unpublished Doctoral thesis, City, University of London)

Roncero, A. V. (2020). Numerical modelling of multiphase diesel fuel properties using the PC-SAFT equation of state and its effect on nozzle flow and cavtation under extreme pressurisation. (Unpublished Doctoral thesis, City, University of London)

S

Sivaloganathan, S. (1991). Sketching input for computer aided engineering. (Unpublished Doctoral thesis, City, University of London)

Soomro, A.H. (2021). Induction machine based flywheel energy storage system for isolated microgrid applications. (Unpublished Doctoral thesis, City, University of London)

Stavropoulos-Vasilakis, E. (2020). Immersed boundary method for cavitating and biological flows. (Unpublished Doctoral thesis, City, University of London)

Suardi, C. A. (2020). Separating flows around swept and unswept wings with laminar and turbulent free stream conditions. (Unpublished Doctoral thesis, City, University of London)

Swain, R. C. (1993). The application of pulsed laser Electronic Speckle Pattern Interferometry to the measurement of in-plane strain on high speed rotating components. (Unpublished Doctoral thesis, City, University of London)

T

Talboys, E. (2021). On the aerodynamic and aeroacoustic effect of passive trailing edge flaplets. (Unpublished Doctoral thesis, City, University of London)

Tamanna, N. (2019). Modelling of residual stresses of the laser cladding process. (Unpublished Doctoral thesis, City, University of London)

V

van Bokhorst, E. (2018). Forcing of the primary and secondary crossflow instability. (Unpublished Doctoral thesis, City, University of London)

W

Wirasinghe, N E A (1975). Swirling and non-swirling flow in conical diffusers. (Unpublished Doctoral thesis, City, University of London)

Wong, Y. Y. (2019). Developing a cardiac mechanics analysis framework using shell finite elements. (Unpublished Doctoral thesis, City, University of London)

X

Xu, Z.G. (1991). An investigation of two-phase flow of organic working fluids in the inlet port of a Lysholm screw expander. (Unpublished Doctoral thesis, City, University of London)

Xu(Xiong), X.Y. (1992). Numerical analysis of blood flow in 3-D arterial bifurcations. (Unpublished Doctoral thesis, City, University of London)