Browse by Schools and Department by Authors
![]() | Up a level |
- City, University of London (19910)
- School of Mathematics, Computer Science & Engineering (6374)
- Computer Science (2126)
- Engineering (2920)
- Mathematics (921)
- School of Mathematics, Computer Science & Engineering (6374)
Virdi, K. & Tenhunen, L., eds. (2012). Proceedings of the METNET Seminar 2012 in Izmir. Hämeenlinna, Finland: HAMK University of Applied Sciences.
Virdi, K. & Tehunen, L., eds. (2014). Proceedings of the METNET Seminar 2013 in Luleå. Hämeenlinna, Finland: HAMK University of Applied Sciences.
Virdi, K. & Tenhunen, L., eds. (2014). Proceedings of the METNET Seminar 2014 in Moscow. Hämeenlinna, Finland: HAMK University of Applied Sciences.
Abay, T. & Kyriacou, P. A. (2015). Reflectance Photoplethysmography as Non-Invasive Monitoring of Tissue Blood Perfusion.. IEEE Trans Biomed Eng, PP(99), doi: 10.1109/TBME.2015.2417863
Abdallah, Riyadh A (2007). Finite Element Based Beam Propagation Analysis of Optical Semiconductor Devices. (Unpublished Doctoral thesis, City, University of London)
Abdollahi, Z., Kyriacou, P. A. & Phillips, J. P. (2015). Evaluation of optical interference in a combined measurement system used for assessment of tissue blood flow. SPIE Proceedings, 9315(93150R), doi: 10.1117/12.2079760
Abu Bakar, H. H. (1993). Icosahedral symmetry and its application to possible models of the fullerene molecule C60. (Unpublished Doctoral thesis, City, University of London)
Addepalli, S., Pagalday, G., Salonitis, K. & Roy, R. ORCID: 0000-0001-5491-7437 (2018).
Socio-economic and demographic factors that contribute to the growth of the civil aviation industry.
Procedia Manufacturing, 19,
pp. 2-9.
doi: 10.1016/j.promfg.2018.01.002
Addepalli, S., Roy, R. ORCID: 0000-0001-5491-7437, Axinte, D. & Mehnen, J. (2017).
'In-situ' inspection technologies: Trends in degradation assessment and associated technologies.
Procedia CIRP, 59,
pp. 35-40.
doi: 10.1016/j.procir.2016.10.003
Addepalli, S., Zhao, Y., Erkoyuncu, J. A. & Roy, R. ORCID: 0000-0001-5491-7437 (2021).
Quantifying uncertainty in pulsed thermographic inspection by analysing the thermal diffusivity measurements of metals and composites.
Sensors, 21(16),
5480.
doi: 10.3390/s21165480
Addepalli, S., Zhao, Y., Roy, R. ORCID: 0000-0001-5491-7437 , Galhenege, W., Colle, M., Yu, J. & Ucur, A. (2019).
Non-destructive evaluation of localised heat damage occurring in carbon composites using thermography and thermal diffusivity measurement.
Measurement, 131,
pp. 706-713.
doi: 10.1016/j.measurement.2018.09.040
Agamah, Simon (2016). Evolutionary combinatorial optimisation for energy storage scheduling, and web-based power systems analysis using PHP. (Unpublished Doctoral thesis, City, University of London)
Ahmadi, R. (2011). Stochastic modelling and maintenance optimization of systems subject to deterioration. (Unpublished Doctoral thesis, City University London)
Ahmed, T., Qassem, M. ORCID: 0000-0003-0730-3189 & Kyriacou, P. A.
ORCID: 0000-0002-2868-485X (2022).
Physiological monitoring of stress and major depression: A review of the current monitoring techniques and considerations for the future.
Biomedical Signal Processing and Control, 75,
103591.
doi: 10.1016/j.bspc.2022.103591
Ahmed El-Kady, A.H.A. (1984). Risk management in reinsurance. (Unpublished Doctoral thesis, City University London)
Al-Shaghana, K.H. (1987). A Study of Developing Secondary Industry In the Arab World Based on Joint-Venture Between Kuwait and Morocco. (Unpublished Doctoral thesis, City University London)
Allwood, J. M., Childs, T. H. C., Clare, A. T. , De Silva, A. K. M., Dhokia, V., Hutchings, I. M., Leach, R. K., Leal-Ayala, D. R., Lowth, S., Majewski, C. E., Marzano, A., Mehnen, J., Nassehi, A., Ozturk, E., Raffles, M. H., Roy, R. ORCID: 0000-0001-5491-7437, Shyha, I. & Turner, S. (2016).
Manufacturing at double the speed.
Journal of Materials Processing Technology, 229,
pp. 729-757.
doi: 10.1016/j.jmatprotec.2015.10.028
Alonso, E., Karcanias, N. & Hessami, A. G. (2013). Symmetries, Groups, Groupoids and Systems of Systems. SYSCON 2013: 7th Annual IEEE International Systems Conference, pp. 244-250. doi: 10.1109/SysCon.2013.6549889
Alwis, L., Bremer, K., Sun, T. & Grattan, K. T. V. (2013). Analysis of the Characteristics of PVA-Coated LPG-Based Sensors to Coating Thickness and Changes in the External Refractive Index. IEEE Sensors Journal, 13(3), pp. 1117-1124. doi: 10.1109/JSEN.2012.2230534
Alwis, L., Sun, T. & Grattan, K. T. V. (2016). Developments in optical fibre sensors for industrial applications. Optics and Laser Technology, 78(A), pp. 62-66. doi: 10.1016/j.optlastec.2015.09.004
Ams, M., Pal, A., Williams, R.J. , Sen, R., Withford, M.J., Sun, T. & Grattan, K. T. V. (2014). Fibre Bragg Grating Sensors for Radiation Insensitive Measurements. Paper presented at the OECC/ACOFT 2014, 06-07-2014 - 10-07-2014, Melbourne, Australia.
Andrienko, N., Andrienko, G., Stange, H. , Liebig, T. & Hecker, D. (2012). Visual Analytics for Understanding Spatial Situations from Episodic Movement Data. Künstliche Intelligenz, 26(3), pp. 241-251. doi: 10.1007/s13218-
Apostolopoulos, C. (2015). Risk assessment for change management within project management: a hierarchical model process approach. (Unpublished Doctoral thesis, City University London)
Apostolopoulou, D. ORCID: 0000-0002-9012-9910, De Greve, Z. & McCulloch, M. (2018).
Robust Optimisation for Hydroelectric System Operation under Uncertainty.
IEEE Transactions on Power Systems, 33(3),
pp. 3337-3348.
doi: 10.1109/TPWRS.2018.2807794
Apostolopoulou, D. ORCID: 0000-0002-9012-9910, Sauer, P. W. & Dominguez-Garcia, A. D. (2016).
Balancing Authority Area Model and its Application to the Design of Adaptive AGC Systems.
IEEE Transactions on Power Systems, 31(5),
pp. 3756-3764.
doi: 10.1109/TPWRS.2015.2506181
Armstrong, Keith Bernard (1990). The selection of adhesives and composite matrix resins for aircraft repairs. (Unpublished Doctoral thesis, City University, London)
Arnold, P. (2018). Hybrid Radio Resource Management with Limited Channel Feedback Information in Relay enhanced OFDMA Networks. (Unpublished Doctoral thesis, City, University of London)
Arsu, N. (1993). Some aspects of free radical polymerisation in UV-curing. (Unpublished Doctoral thesis, City University London)
Arunkumar, S., Sensoy, M., Srivatsa, M. & Rajarajan, M. (2015). Reasoning with Streamed Uncertain Information from Unreliable Sources. Expert Systems with Applications, 42(22), pp. 8381-8392. doi: 10.1016/j.eswa.2015.04.031
Aschoff, Rafael Roque (2014). A Proactive Adaptation Framework for Composite Web Services. (Unpublished Doctoral thesis, City University London)
Asif, W. (2016). Critical Node Identifcation for accessing network vulnerability, a necessary consideration. (Unpublished Doctoral thesis, City, University of London)
Astolfi, D., Forini, V. ORCID: 0000-0001-9726-1423, Grignani, G. & Semenoff, G. W. (2007).
Gauge invariant finite size spectrum of the giant magnon.
Physics Letters B, 651(4),
pp. 329-335.
doi: 10.1016/j.physletb.2007.06.002
Astolfi, D., Grignani, G., Forini, V. ORCID: 0000-0001-9726-1423 & Semenoff, Gordon W (2006).
Finite size corrections and integrability of N=2 SYM and DLCQ strings on a pp-wave.
Journal of High Energy Physics(9),
056..
doi: 10.1088/1126-6708/2006/09/056
Athanassiadou, C. J., Karakostas, C. Z., Margaris, B. N. & Kappos, A. J. (2011). Displacement spectra and displacement modification factors, based on records from Greece. Soil Dynamics and Earthquake Engineering, 31(12), pp. 1640-1653. doi: 10.1016/j.soildyn.2011.06.008
Backer Dirks, T. (2018). On the controllability of saturating crossflow vortices. (Unpublished Doctoral thesis, City, University of London)
Badalamenti, C. (2010). On the Application of Rotating Cylinders to Micro Air Vehicles. (Unpublished Doctoral thesis, City University London)
Banerjee, J. R. (2015). Advances in structural dynamics, aeroelasticity and material science. (Unpublished Doctoral thesis, City University London)
Basha, N. (2021). Numerical analysis of oil injection in twin-screw compressors. (Unpublished Doctoral thesis, City, University of London)
Beccaria, M. & Forini, V. ORCID: 0000-0001-9726-1423 (2009).
Qcd-like properties of anomalous dimensions in the N=4 supersymmetric Yang-Mills theory.
Theoretical and Mathematical Physics, 159(3),
doi: 10.1007/s11232-009-0059-6
Beccaria, M., Forini, V. ORCID: 0000-0001-9726-1423 & Macorini, G. (2010).
Generalized Gribov-Lipatov Reciprocity and AdS/CFT.
Advances in High Energy Physics,
753248..
doi: 10.1155/2010/753248
Beccaria, M., Forini, V. ORCID: 0000-0001-9726-1423, Tirziu, A. & Tseytlin, A. A. (2009).
Structure of large spin expansion of anomalous dimensions at strong coupling.
Nuclear Physics B, 812(1-2),
pp. 144-180.
doi: 10.1016/j.nuclphysb.2008.12.013
Begaj, L. & McNamara, A.M. (2011). Centrifuge model testing for pile foundation reuse. INTERNATIONAL JOURNAL OF PHYSICAL MODELLING IN GEOTECHNICS, 11(4), pp. 166-177. doi: 10.1680/ijpmg.2011.11.4.166
Belhaj, A., Phillips, J. P., Kyriacou, P. A. & Langford, R. M. (2013). Non-invasive optical estimation of local venous oxygen saturation. British Journal of Anaesthesia, 110(5), 877P-878P. doi: 10.1093/bja/aes490
Bianchi, G., Kovacevic, A., Cipollone, R. , Murgia, S. & Contaldi, G. (2017). Numerical CFD simulations on a small-scale ORC expander using a customized grid generation methodology. Energy Procedia, 129, pp. 843-850. doi: 10.1016/j.egypro.2017.09.199
Bianchi, L., Forini, V. ORCID: 0000-0001-9726-1423 & Kotikov, A. V. (2013).
On DIS Wilson coefficients in N=4 super Yang-Mills theory.
Physics Letters B, 725(4-5),
pp. 394-401.
doi: 10.1016/j.physletb.2013.07.013
Binnersley, J., Woodcock, A., Kyriacou, P. A. & Wallace, L. M. (2009). Establishing user requirements for a patient held electronic record system in the United Kingdom. Human Factors and Ergonomics Society, 53rd Annual Meeting, 2, pp. 714-717. ISSN 1071-1813
Boddington, Stephen Charles (1990). Studies on the recovery of useful chemicals from waste and secondary materials. (Unpublished Doctoral thesis, The City University)
Bond, Leonard John (1978). Surface cracks in metals and their characteristics using Rayleigh waves. (Unpublished Doctoral thesis, City, University of London)
Bond, S.J. (2006). Aircraft system safety : a new approach to assessing in-service performance. (Unpublished Doctoral thesis, City University London)
Borsato, R., Olsson-Sax, O., Sfondrini, A. & Stefanski, B. (2014). The complete AdS3 ×S3 × T4 worldsheet S matrix. Journal of High Energy Physics, 2014(10), doi: 10.1007/JHEP10(2014)066
Bowman, C., Cox, A. ORCID: 0000-0001-9799-3122, Hazi, A.
ORCID: 0000-0001-7264-2211 & Michailidis, D. (2021).
Path combinatorics and light leaves for quiver Hecke algebras.
Mathematische Zeitschrift,
doi: 10.1007/s00209-021-02829-0
Braun, M. H. (2019). Enhancing User Experience with Olfaction in Virtual Reality. (Unpublished Doctoral thesis, City, University of London)
Brooks, S. J. ORCID: 0000-0002-5712-7358 & Roy, R.
ORCID: 0000-0001-5491-7437 (2022).
Design and complexity evaluation of a self-cleaning heat exchanger.
International Journal of Heat and Mass Transfer, 191,
122725.
doi: 10.1016/j.ijheatmasstransfer.2022.122725
Brooks, S. J. ORCID: 0000-0002-5712-7358 & Roy, R.
ORCID: 0000-0001-5491-7437 (2021).
An overview of self-engineering systems.
Journal of Engineering Design, 32(8),
pp. 397-447.
doi: 10.1080/09544828.2021.1914323
Brooks, S. J. ORCID: 0000-0002-5712-7358, Yasin, A., Alatishe, K. & Roy, R.
ORCID: 0000-0001-5491-7437 (2021).
Design and Implementation of a Self-Cleaning Heat Exchanger Using a Digital Twin.
Paper presented at the 10th International Through-Life Engineering Services Conference (Tesconf2021), 16-18 Nov 2021, Online.
doi: 10.2139/ssrn.3944684
Broom, M. & Cannings, C. (2015). Graphic deviation. Discrete Mathematics, 338(5), pp. 701-711. doi: 10.1016/j.disc.2014.12.011
Broom, M., Collins, D. A., Thomas, P. & Vu, T.H. (2018). The Four Regions in Settlement Space: A Game-Theoretical Approach to Investment Treaty Arbitration Part I: Modelling. Law, Probability and Risk, 17(1), pp. 55-78. doi: 10.1093/lpr/mgx020
Broom, M., Collins, D. A., Vu, T.H. & Thomas, P. (2018). The Four Regions in Settlement Space: A Game-Theoretical Approach to Investment Treaty Arbitration Part II: Cases. Law, Probability and Risk, 17(1), pp. 79-98. doi: 10.1093/lpr/mgx019
Broom, M., Lafaye, C., Pattni, K. & Rychtar, J. (2015). A study of the dynamics of multi-player games on small networks using territorial interactions.. Journal of Mathematical Biology, doi: 10.1007/s00285-015-0868-1
Brücker, C. (2015). Evidence of rare backflow and skin-friction critical points in near-wall turbulence using micropillar imaging. Physics of Fluids, 27(031705), doi: 10.1063/1.4916768
Budidha, K. & Kyriacou, P. A. (2015). Investigation of photoplethysmography and arterial blood oxygen saturation from the ear-canal and the finger under conditions of artificially induced hypothermia. Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS, 2015-N, pp. 7954-7957. doi: 10.1109/EMBC.2015.7320237
Burtsev, A., He, W. ORCID: 0000-0002-2633-6114, Zhang, K. , Theofilis, V., Taira, K. & Amitay, M. (2022).
Linear modal instabilities around post-stall swept finite wings at low Reynolds numbers.
Journal of Fluid Mechanics, 944,
doi: 10.1017/jfm.2022.420
Busquets, J. G. (2019). Developing advanced methods to predict air traffic network growth. (Unpublished Doctoral thesis, City, University of London)
Butler, Carol (2021). What does online engagement mean to fiction authors and readers, and what are the implications of those meanings for future research and design?. (Unpublished Doctoral thesis, City, University of London)
Camplin, G. (2007). Rediscovering the arcane science of ground handling large airships : an investigation into ways of reducing the risks inherent in the development of a new generation of very large airships and of establishing guidelines for their ground handling procedure. (Unpublished Doctoral thesis, City University London)
Castelluccio, G. M. & Roy, R. ORCID: 0000-0001-5491-7437 (2018).
Foreword.
Procedia Manufacturing, 16,
p. 1.
doi: 10.1016/j.promfg.2018.10.149
Castillo-Rivera, Salvador (2014). Advanced Modelling of Helicopter Nonlinear Dynamics and Aerodynamics. (Unpublished Doctoral thesis, City University London)
Castro-Alvaredo, O. ORCID: 0000-0003-1876-7341, Fazio, C. D., Doyon, B. & Szécsényi, I. M. (2019).
Entanglement Content of Quantum Particle Excitations III. Graph Partition Functions.
Journal of Mathematical Physics, 60,
082301..
doi: 10.1063/1.5098892
Cen, J. & Fring, A. ORCID: 0000-0002-7896-7161 (2019).
Asymptotic and scattering behaviour for degenerate multi-solitons in the Hirota equation.
Physica D: Nonlinear Phenomena, 397,
pp. 17-24.
doi: 10.1016/j.physd.2019.05.005
Chagnaud, B. P., Brücker, C., Hofmann, M. H. & Bleckmann, H. (2008). Measuring flow velocity and flow direction by spatial and temporal analysis of flow fluctuations. Journal of Neuroscience, 28(17), pp. 4479-4487. doi: 10.1523/JNEUROSCI.4959-07.2008
Chan, T.F. (2004). Induction and permanent-magnet synchronous generators for small-scale power system applications. (Unpublished Doctoral thesis, City University London)
Chan, Y., Wellings, A., Gray, I. & Audsley, N. C. ORCID: 0000-0003-3739-6590 (2017).
A distributed stream library for Java 8.
IEEE Transactions on Big Data, 3(3),
pp. 262-275.
doi: 10.1109/TBDATA.2017.2666201
Chapman, Peter Thomas (2005). Civil transporter conceptual design studies and tradeoff methodologies using a Matlab computational environment. (Unpublished Doctoral thesis, City University)
Charitou, C (2021). Machine Learning for Money Laundering Risk Detection in Online Gambling. (Unpublished Doctoral thesis, City, University of London)
Chatterjee, S. (2018). Monte Carlo investigation of light-tissue interaction in photoplethysmography. (Unpublished Doctoral thesis, City, University of London)
Chaudhary, A.J. (1990). Added-value chemicals from secondary and low-grade primary sources. (Unpublished Doctoral thesis, City University London)
Chen, J-J., Nelissen, G., Huang, W-H. , Yang, M., Brandenburg, B., Bletsas, K., Liu, C., Richard, P., Ridouard, F., Audsley, N. C. ORCID: 0000-0003-3739-6590, Rajkumar, R., de Niz, D. & von der Brueggen, G. (2019).
Many suspensions, many problems: a review of self-suspending tasks in real-time systems.
Real-Time Systems, 55(1),
pp. 144-207.
doi: 10.1007/s11241-018-9316-9
Chuang, J. & Tan, K. M. (2003). Filtrations in Rouquier blocks of symmetric groups and Schur algebras. Proceedings of the London Mathematical Society, 86(3), pp. 685-706. doi: 10.1112/S0024611502013953
Ciulla, F., Perra, N., Baronchelli, A. & Vespignani, A. (2014). Damage detection via shortest-path network sampling. Physical Review E (PRE), 89(5), 052816. doi: 10.1103/PhysRevE.89.052816
Clarke, Timothy Alan (1991). Application of optical techniques to surveying. (Unpublished Doctoral thesis, The City University)
Coombs, W.M., Crouch, R.S. & Augarde, C.E. (2013). A unique Critical State two-surface hyperplasticity model for fine-grained particulate media. Journal of the Mechanics and Physics of Solids, 61(1), pp. 175-189. doi: 10.1016/j.jmps.2012.08.002
Corfar, D. ORCID: 0000-0002-9843-2973 & Tsavdaridis, K. D. (2022).
A Novel Optimised Inter-locking Connection for Steel Modular Building Systems to Enable Reuse.
ce/papers,
doi: 10.1002/cepa.1710
Couppis, A., Damianou, C., Kyriacou, P. A. , Lafon, C., Chavrier, F., Chapelon, J-Y. & Birer, A. (2012). Heart ablation using a planar rectangular high intensity ultrasound transducer and MRI guidance. Ultrasonics, 52(7), pp. 821-829. doi: 10.1016/j.ultras.2012.03.010
Coutts, S.M. (1983). An actuarial approach to motor insurance rating. (Unpublished Doctoral thesis, City University London)
Cox, M G (1975). Numerical methods for the interpolation and approximation of data by spline functions. (Unpublished Post-Doctoral thesis, City, University of London)
Cristofaro, M. (2020). Impact of cavitation erosion on nozzle flow characteristics and liquid fuel atomization. (Unpublished Doctoral thesis, City, University of London)
Cumanan, K, Rahulamathavan, Y., Lambotharan, S & Ding, Z (2013). MMSE-based beamforming techniques for relay broadcast channels. IEEE Transactions on Vehicular Technology, 62(8), pp. 4045-4051. doi: 10.1109/TVT.2013.2257906
Cunningham, S.J., Vanderschantz, N., Timpany, C. , Hinze, A. & Buchanan, G. (2013). Social information behaviour in Bookshops: implications for digital libraries. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 8092 L, pp. 84-95. doi: 10.1007/978-3-642-40501-3_9
Damianou, C., Ioannides, K., Hadjisavvas, V. , Mylonas, N., Couppis, A., Iosif, D. & Kyriacou, P. A. (2010). MRI monitoring of lesions created at temperature below the boiling point and of lesions created above the boiling point using high intensity focused ultrasound. Journal of Biomedical Science and Engineering, 3(8), pp. 763-775. doi: 10.4236/jbise.2010.38102
Danaila, I., Luddens, F., Kaplanski, F. , Papoutsakis, A. ORCID: 0000-0002-5449-5921 & Sazhin, S. S. (2018).
Formation number of confined vortex rings.
Physical Review Fluids, 3(9),
doi: 10.1103/PhysRevFluids.3.094701
Dar, T. (2015). Numerical characterisation of label free optical biosensors. (Unpublished Doctoral thesis, City University London)
De Fazio, C. (2021). From Entanglement to Hydrodynamics: Exploring the Role of Quasiparticles in Integrable Quantum Field Theory. (Unpublished Doctoral thesis, City, University of London)
De Martino, A., Dell'Anna, L. & Egger, R. (2007). Magnetic barriers and confinement of Dirac-Weyl quasiparticles in graphene. Solid State Communications, 144(12), pp. 547-550. doi: 10.1016/j.ssc.2007.03.062
De Visscher, M., Bowman, C. & King, O. (2015). The blocks of the partition algebra in positive characteristic. Algebras and Representation Theory, 18(5), pp. 1357-1388. doi: 10.1007/s10468-015-9544-9
De Visscher, M. & Martin, P. (2016). On Brauer algebra simple modules over the complex field. Transactions of the American Mathematical Society, doi: 10.1090/tran/6716
Deakin, M., Crozier, C., Apostolopoulou, D. ORCID: 0000-0002-9012-9910 , Morstyn, T. & McCulloch, M. (2020).
Stochastic Hosting Capacity in LV Distribution Networks.
2019 IEEE Power & Energy Society General Meeting (PESGM),
ISSN 1944-9933
doi: 10.1109/PESGM40551.2019.8973688
Dhunput, A. (2009). Oil Transport in Piston Ring Assemblies. (Unpublished Doctoral thesis, City University London)
Dillingham, I. (2013). Exploring the geographic uncertainty associated with crowdsourced crisis information: a geovisualisation approach. (Unpublished Doctoral thesis, City University London)
Divall, S., Goodey, R.J. & Taylor, R. N. (2012). Ground movements generated by sequential Twin-tunnelling in over-consolidated clay. Paper presented at the 2nd European Conference on Physical Modelling in Geotechnics, 23-04-2012 - 24-04-2012, Delft University of Technology, Netherlands. doi: 10.4233/uuid:f71fabea-424b-42e5-93aa-701715eed17d
Doyle, Victoria Carey Felicitas (1998). TQM : fad or fixture? Implementing total quality management in health care setting through the development and use of customer-supplier models. (Unpublished Doctoral thesis, City University, London)
Dritsas, L., Kontouras, E., Vlahakis, E. , Kitsios, I., Halikias, G. ORCID: 0000-0003-1260-1383 & Tzes, A. (2020).
Modelling issues and aggressive robust load frequency control of interconnected electric power systems.
International Journal of Control,
doi: 10.1080/00207179.2020.1821248
Du, W., Zhao, Y., Roy, R. ORCID: 0000-0001-5491-7437 , Addepalli, S. & Tinsley, L. (2018).
A review of miniaturised Non-Destructive Testing technologies for in-situ inspections.
Procedia Manufacturing, 16,
pp. 16-23.
doi: 10.1016/j.promfg.2018.10.152
Dufresne, D. (1986). The dynamics of pension funding. (Unpublished Doctoral thesis, City University London)
Eckhardt, H.S (2009). Gas analysis in the deep ultraviolet wavelength region using fibre-optics and spectrophotometric detection. (Unpublished Doctoral thesis, City, University of London)
Eisele, F. (2012). Group Rings over the p-Adic Integers. (Unpublished Doctoral thesis, RWHT Aachen University)
El-Ashry, A.E.M.E. (1986). Aviation risk management. (Unpublished Doctoral thesis, City University London)
El-Hajj, C. (2022). Machine learning techniques for the prediction of systolic and diastolic blood pressure utilising the photoplethysmogram. (Unpublished Doctoral thesis, City, University of London)
El-Sherbiny, Hamid Moustafa (1987). The Korteweg-De Vries Equation and its Homologues: A Comparative Analysis II. (Unpublished Doctoral thesis, City, University of London)
Elmufti, K. (2008). Authentication and privacy in mobile web services. (Unpublished Doctoral thesis, City University London)
Elombo, A., Morstyn, T., Apostolopoulou, D. ORCID: 0000-0002-9012-9910 & McCulloch, M. D. (2017).
Residential Load Variability and Diversity at Different Sampling Time and Aggregation Scales.
2017 IEEE AFRICON,
pp. 1331-1336.
doi: 10.1109/AFRCON.2017.8095675
Elsayed, H.I. (2014). Utility Applications of Smart Online Energy Systems: A case for Investing in Online Power Electronics. (Unpublished Doctoral thesis, City University London)
Eon Kang, Shin (2014). Hot ductility of TWIP steels. (Unpublished Doctoral thesis, City University London)
Erkoyuncu, J. A., Khan, S., Hussain, S. M. F. & Roy, R. ORCID: 0000-0001-5491-7437 (2016).
A framework to estimate the cost of No-Fault Found events.
International Journal of Production Economics, 173,
pp. 207-222.
doi: 10.1016/j.ijpe.2015.12.013
Erkoyuncu, J. A., Roy, R. ORCID: 0000-0001-5491-7437, Shehab, E. , Durugbo, C., Khan, S. & Datta, P. (2019).
An effective uncertainty based framework for sustainable industrial product-service system transformation.
Journal of Cleaner Production, 208,
pp. 160-177.
doi: 10.1016/j.jclepro.2018.09.182
Erkoyuncu, J. A., del Amo, I. F., Ariansyah, D. , Bulka, D., Vrabič, R. & Roy, R. ORCID: 0000-0001-5491-7437 (2020).
A design framework for adaptive digital twins.
CIRP Annals, 69(1),
pp. 145-148.
doi: 10.1016/j.cirp.2020.04.086
Erkoyuncu,, J. A., Fernandez del Amo, I., Dalle Mura, M. & Roy, R. ORCID: 0000-0001-5491-7437 (2017).
Improving efficiency of industrial maintenance with context aware adaptive authoring in augmented reality.
CIRP Annals, 66,
pp. 465-468.
doi: 10.1016/j.cirp.2017.04.006
Estelles, S. & Tomas-Rodriguez, M. (2015). Quadrotor multibody modelling by vehiclesim: adaptive technique for oscillations in a PVA control system. Journal of Vibration and Control, doi: 10.1177/1077546315619776
Farion, K.J., Wilk, S., Michalowski, W. , O'Sullivan, D. & Sayyad-Shirabad, J. (2013). Comparing predictions made by a prediction model, clinical score, and physicians Pediatric asthma exacerbations in the emergency department. APPLIED CLINICAL INFORMATICS, 4(3), pp. 376-391. doi: 10.4338/ACI-2013-04-RA-0029
Farsi, M., Erkoyuncu, J. A., Steenstra, D. & Roy, R. ORCID: 0000-0001-5491-7437 (2019).
A modular hybrid simulation framework for complex manufacturing system design.
Simulation Modelling Practice and Theory, 94,
pp. 14-30.
doi: 10.1016/j.simpat.2019.02.002
Farsi, M., Grenyer, A., Sachidananda, M. , Sceral, M., Mcvey, S., Erkoyuncu, J. & Roy, R. ORCID: 0000-0001-5491-7437 (2018).
Conceptualising the impact of information asymmetry on through-life cost: case study of machine tools sector.
Procedia Manufacturing, 16,
pp. 99-106.
doi: 10.1016/j.promfg.2018.10.172
Fernandez del Amo, I., Erkoyuncu, J. A., Vrabič, R. , Frayssinet, R., Vazquez Reynel, C. & Roy, R. ORCID: 0000-0001-5491-7437 (2020).
Structured authoring for AR-based communication to enhance efficiency in remote diagnosis for complex equipment.
Advanced Engineering Informatics, 45,
101096..
doi: 10.1016/j.aei.2020.101096
Fernández Del Amo, I., Erkoyuncu, J. A., Roy, R. ORCID: 0000-0001-5491-7437 & Wilding, S. (2018).
Augmented Reality in Maintenance: An information-centred design framework.
Procedia Manufacturing, 19,
pp. 148-155.
doi: 10.1016/j.promfg.2018.01.021
Fonseca, J., Bésuelle, P. & Viggiani, G. (2013). Micromechanisms of inelastic deformation in sandstones: An insight using x-ray micro-tomography. Geotechnique Letters, 3, pp. 78-83. doi: 10.1680/geolett.13.034
Fonseca, J., O'Sullivan, C., Coop, M. R. & Lee, P. D. (2012). Non-invasive characterization of particle morphology of natural sands. Soils and Foundations, 52(4), pp. 712-722. doi: 10.1016/j.sandf.2012.07.011
Forbes, H. (2021). The two-spinor formalism in the study of the Bach equations and the massless free-field equations. (Unpublished Doctoral thesis, City, University of London)
Forini, V. (2018). On regularizing the AdS superstring worldsheet. In: Bruning, J. & Staudacher, M. (Eds.), Space - Time - Matter: Analytic and Geometric Structures. (pp. 221-244). Berlin: De Gruyter. doi: 10.1515/9783110452150-009
Forini, V. ORCID: 0000-0001-9726-1423, Bianchi, L., Bianchi, M. S. , Leder, B. & Vescovi, E. (2015).
Lattice and string worldsheet in AdS/CFT: a numerical study.
PoS(LATTICE 2015),
244..
Forini, V., Bianchi, L. & Hoare, B. (2015). Scattering and Unitarity Methods in Two Dimensions. 1st Karl Schwarzschild Meeting on Gravitational Physics. Springer Proceedings in Physics, 170, pp. 169-177. doi: 10.1007/978-3-319-20046-0_20
Forini, V. ORCID: 0000-0001-9726-1423, Bianchi, L., Leder, B. , Toepfer, P. & Vescovi, E. (2017).
Strings on the lattice and AdS/CFT.
PoS (LATTICE 2016),
206..
Fraccaro, P., Nicolo, M., Bonetto, M. , Giacomini, M., Weller, P., Traverso, C. E., Prosperi, M. & O'Sullivan, D. (2015). Combining macula clinical signs and patient characteristics for age-related macular degeneration diagnosis: a machine learning approach. BMC OPHTHALMOLOGY, 15(10), doi: 10.1186/1471-2415-15-10
Fraccaro, P., O'Sullivan, D., Plastiras, P. , O'Sullivan, H., Dentone, C., Di Biagio, A. & Weller, P. (2015). Behind the screens: Clinical decision support methodologies - A review. Health Policy and Technology, 4(1), doi: 10.1016/j.hlpt.2014.10.001
Fring, A. (1992). Couplings in Affine Toda Field Theories. Unpublished,
Fring, A. & Frith, T. (2018). Metric versus observable operator representation, higher spin models. The European Physical Journal Plus, 133, 57.. doi: 10.1140/epjp/i2018-11892-4
Fumarola, I. (2019). Effect of Freestream Turbulence on the Boundary Layer on a Swept Leading Edge. (Unpublished Doctoral thesis, City, University of London)
Gadala, M. (2017). Automation bias: exploring causal mechanisms and potential mitigation strategies. (Unpublished Doctoral thesis, City, University of London)
Gao, R. X., Yan, R., Roy, R. ORCID: 0000-0001-5491-7437 , Erkoyuncu, J. A., Tracht, K. & Wang, P. (2020).
Preface.
Procedia Manufacturing, 49,
p. 1.
doi: 10.1016/j.promfg.2020.06.002
Gaudron, J.O. (2015). Design and characterisation of long period grating (LPG) - based optical fibre sensors for acoustic wave detection. (Unpublished Doctoral thesis, City University London)
Gendy, S. S. F. M. (2018). Explicit second-order mixed formulation of reinforced concrete structures under impact loading. (Unpublished Doctoral thesis, City, University of London)
Gladwin, R.P. (1975). Seperations by continuous column crystallisation. (Unpublished Doctoral thesis, City University London)
Glick, R. ORCID: 0000-0001-7789-9358, Muthuramalingam, M. & Brücker, C.
ORCID: 0000-0001-5834-3020 (2022).
Sea lions could use multilateration localization for object tracking as tested with bio-inspired whisker arrays.
Scientific Reports, 12(1),
11764.
doi: 10.1038/s41598-022-15904-1
Gomony, M., Garside, J., Akesson, B. , Audsley, N. C. ORCID: 0000-0003-3739-6590 & Goossens, K. (2017).
A Globally Arbitrated Memory Tree for Mixed-Time-Criticality Systems.
IEEE Transactions on Computers, 66(2),
pp. 212-225.
doi: 10.1109/TC.2016.2595581
Gong, P. (2017). Energy efficient and secure wireless communications for wireless sensor networks. (Unpublished Doctoral thesis, City, University of London)
Gowree, E. R. (2014). Influence of Attachment Line Flow on Form Drag. (Unpublished Doctoral thesis, City University London)
Grenyer, A., Addepalli, S., Zhao, Y. , Oakey, L., Erkoyuncu, J. A. & Roy, R. ORCID: 0000-0001-5491-7437 (2018).
Identifying challenges in quantifying uncertainty: Case study in infrared thermography.
Procedia CIRP, 73,
pp. 108-113.
doi: 10.1016/j.procir.2018.03.301
Grenyer, A., Dinmohammadi, F., Erkoyuncu, J. A. , Zhao, Y. & Roy, R. ORCID: 0000-0001-5491-7437 (2019).
Current practice and challenges towards handling uncertainty for effective outcomes in maintenance.
Procedia CIRP, 86,
pp. 282-287.
doi: 10.1016/j.procir.2020.01.024
Grenyer, A., Erkoyuncu, J. A., Zhao, Y. & Roy, R. ORCID: 0000-0001-5491-7437 (2021).
A systematic review of multivariate uncertainty quantification for engineering systems.
CIRP Journal of Manufacturing Science and Technology, 33,
pp. 188-208.
doi: 10.1016/j.cirpj.2021.03.004
Gulistan, A. (2019). Reduced mode coupling and nonlinear interaction in optical fibres. (Unpublished Doctoral thesis, City, University of London)
Guo, Shijing (2016). Systemic analysis and modelling of diagnostic errors in medicine. (Unpublished Doctoral thesis, City University London)
Hafiz bin Haji Khozali, Muhammed (1981). Computer aided mathematical modelling of turbulent flow for orifice metering. (Unpublished Doctoral thesis, The City University)
Hamadi, Emad (2021). Convex relaxation methods in optimisation and robust control. (Unpublished Doctoral thesis, City, University of London)
Hawe, G.I., Coates, G., Wilson, D.T. & Crouch, R.S. (2012). Agent-based simulation for large-scale emergency response: A survey of usage and implementation. ACM Computing Surveys, 45(1), doi: 10.1145/2379776.2379784
Haynes, D. (2011). Social Networks in the workplace - some data protection issues. Free Pint,
Hebel, Maria (1998). Exploring the Impact of Human Value Systems on Performance Measurement. (Unpublished Doctoral thesis, City, University of London)
Hemon, M. C. & Phillips, J. P. (2015). Comparison of foot finding methods for deriving instantaneous pulse rates from photoplethysmographic signals. Journal of Clinical Monitoring and Computing, 30(2), pp. 157-168. doi: 10.1007/s10877-015-9695-6
Hess, D., Brücker, C., Hegner, F. , Balmert, A. & Bleckmann, H. (2013). Vortex formation with a snapping shrimp claw. PLoS ONE, 8(11), pp. 1-10. doi: 10.1371/journal.pone.0077120
Hessami, A. G. & Karcanias, N. (2010). Systems Assurance, Complexity and Emergence: The Need for a Systems Based Approach. In: Magalhães, S. T. D., Jahankhani, H. & Hessami, A. G. (Eds.), Global Security, Safety, and Sustainability. Communications in Computer and Information Science, 92. (pp. 202-215). Springer. doi: 10.1007/978-3-642-15717-2_22
Hickey, M., Kyriacou, P. A., Samuels, N. , Randive, N., Chang, S. H., Maney, K. & Langford, R. M. (2009). Photoplethysmographic signals recorded from human abdominal organs using a fibreoptic probe. British Journal of Anaesthesia, 102(4), 579P-580P. doi: 10.1093/bja/aep007
Hickey, M., Samuels, N., Randive, N. , Langford, R. M. & Kyriacou, P. A. (2009). Development and evaluation of a photometric fibre-optic sensor for monitoring abdominal organ photoplethysmographs and blood oxygen saturation. SPIE Proceedings, 7503, ISSN 0277-786X doi: 10.1117/12.834307
Hickey, M., Samuels, N., Randive, N. , Langford, R. M. & Kyriacou, P. A. (2010). Preliminary assessment of abdominal organ perfusion utilizing a fiber optic photoplethysmographic sensor. Conference proceedings : ... Annual International Conference of the IEEE Engineering in Medicine and Biology Society. IEEE Engineering in Medicine and Biology Society. Conference, pp. 1020-1023. ISSN 1557-170X doi: 10.1109/IEMBS.2010.5627751
Hickey, M., Samuels, N., Randive, N. , Langford, R. M. & Kyriacou, P. A. (2011). An in vivo investigation of photoplethysmographic signals and preliminary pulse oximetry estimation from the bowel using a new fiberoptic sensor. Anesthesia and Analgesia, 112(5), pp. 1104-1109. doi: 10.1213/ANE.0b013e31820f8df3
Hickey, M., Samuels, N., Randive, N. , Langford, R. M. & Kyriacou, P. A. (2012). A new fibre optic pulse oximeter probe for monitoring splanchnic organ arterial blood oxygen saturation. Computer Methods and Programs in Biomedicine, 108(3), pp. 883-888. doi: 10.1016/j.cmpb.2011.03.019
Honarvar Shakibaei Asli, B., Flusser, J., Zhao, Y. , Erkoyuncu, J. A., Banerjee Krishnan, K., Farrokhi, Y. & Roy, R. ORCID: 0000-0001-5491-7437 (2020).
Ultrasound Image Filtering and Reconstruction Using DCT/IDCT Filter Structure.
IEEE Access, 8,
pp. 141342-141357.
doi: 10.1109/access.2020.3011970
Jahromizadeh, S. (2013). Join rate control and scheduling for providing bounded delay with high efficiency in multihop wireless networks. (Unpublished Doctoral thesis, City University London)
Jansson, A. (2019). Musical source separation with deep learning and large-scale datasets. (Unpublished Doctoral thesis, City, University of London)
Jenkins, E. P. W., Finch, A., Gerigk, M. , Triantis, I. ORCID: 0000-0002-8900-781X, Watts, C. & Malliaras, G. G. (2021).
Electrotherapies for Glioblastoma.
Advanced Science, 8(18),
doi: 10.1002/advs.202100978
Jones, Sara (1993). Three-Dimensional Interactive Connection Diagrams for Knowledge Engineering. (Unpublished Doctoral thesis, City, University of London)
Kabir, I. R. (2019). Modelling of Laser Surface Glazing for Metallic Materials by Finite Element Method. (Unpublished Doctoral thesis, City, University of London)
Kabir, S. (2007). Finite element modelling of photonic crystal fibres. (Unpublished Doctoral thesis, City University London)
Kabir, S.M. Raiyan (2015). Finite element time domain method with a unique coupled mesh system for electromagnatics and photonics. (Unpublished Doctoral thesis, City University London)
Kakander, E., Roy, R. ORCID: 0000-0001-5491-7437 & Mehnen, J. (2017).
A Simulation Based Approach to Model Design Influence on the Fatigue Life of a Vented Brake Disc.
Procedia CIRP, 59,
pp. 41-46.
doi: 10.1016/j.procir.2016.09.022
Kaparias, I. (2008). Reliable dynamic in-vehicle navigation. (Unpublished Doctoral thesis, Imperial College)
Kappos, A. J. & Antoniadis, P. S. (2010). Evaluation and suggestions for improvement of seismic design procedures for R/C walls in dual systems. Earthquake Engineering & Structural Dynamics, 40(1), pp. 35-53. doi: 10.1002/eqe.1019
Kappos, A.J., Gkatzogias, K.I. & Gidaris, I.G. (2013). Extension of direct displacement-based design methodology for bridges to account for higher mode effects. Earthquake Engineering and Structural Dynamics, 42(4), pp. 581-602. doi: 10.1002/eqe.2229
Karamuftuoglu, H. Murat (1998). Knowledge Based Information Retrieval: A Semiotic Approach. (Unpublished Doctoral thesis, City, University of London)
Karim, Mohammad (2015). Design and optimization of chalcogenide waveguides for supercontinuum generation. (Unpublished Doctoral thesis, City University London)
Karimi, M., Surre, F., Sun, T. , Grattan, K. T. V., Margulis, W. & Fonjallaz, P. (2012). Theoretical Analysis of a Non-Symmetric Polarization-Maintaining Single-Mode Fiber for Sensor Applications. Journal of Lightwave Technology, 30(3), pp. 362-367. doi: 10.1109/JLT.2011.2178589
Katrisku, Ferdinand Apietu (2000). Finite Element Study of the Second Order (X²) Nonlinear Process of Second Harmonic Generation in Optical Waveguides. (Unpublished Doctoral thesis, City, University of London)
Keißner, A. & Brücker, C. (2012). Directional fluid transport along artificial ciliary surfaces with base-layer actuation of counter-rotating orbital beating patterns. Soft Matter, 8(19), pp. 5342-5349. doi: 10.1039/c2sm25287b
Kerr, O. (2014). Comment on 'Nonlinear eigenvalue problems'. Journal of Physics A: Mathematical and Theoretical, 47(36), p. 368001. doi: 10.1088/1751-8113/47/36/368001
Kessar, R. (2012). On isotypies between Galois conjugate blocks. Springer Proceedings in Mathematics, 10, pp. 153-162. doi: 10.1007/978-1-4614-0709-6_7
Kessar, R., Koshitani, S. & Linckelmann, M. (2015). On symmetric quotients of symmetric algebras. Journal of Algebra, 442, pp. 423-437. doi: 10.1016/j.jalgebra.2014.05.035
Kessar, R. & Malle, G. (2013). Quasi-isolated blocks and Brauer's height zero conjecture. ANNALS OF MATHEMATICS, 178(1), pp. 321-384. doi: 10.4007/annals.2013.178.1.6
Khani, S., Gacek, C. & Popov, P. T. (2015). Security-aware selection of Web Services for Reliable Composition. Paper presented at the 11th European Dependable Computing Conference, Student Forum, September 7-11 2015, Paris, France.
Kokkola, N. (2017). A Double-Error Correction Computational Model of Learning. (Unpublished Doctoral thesis, City, University of London)
Kouris, L.A.S. & Kappos, A.J. (2012). Detailed and simplified non-linear models for timber-framed masonry structures. JOURNAL OF CULTURAL HERITAGE, 13(1), pp. 47-58. doi: 10.1016/j.culher.2011.05.009
Kovolos, K. (2021). Assessment of transient effects in diesel injectors affected by fouling and cavitation erosion. (Unpublished Doctoral thesis, City, University of London)
Kumar, R. (2020). Development of novel optical fibre sensors based on upconverting and gold nanoparticles. (Unpublished Doctoral thesis, City, University of London)
Kura, K. (2016). Mathematical modelling of dominance hierarchies. (Unpublished Doctoral thesis, City, University of London)
Kura, K., Broom, M. & Kandler, A. (2016). A Game-Theoretical Winner and Loser Model of Dominance Hierarchy Formation. Bulletin of Mathematical Biology, 78(6), pp. 1259-1290. doi: 10.1007/s11538-016-0186-9
Kura, K., Broom, M. & Kandler, A. (2015). Modelling Dominance Hierarchies Under Winner and Loser Effects. Bulletin of Mathematical Biology, 77(6), pp. 927-952. doi: 10.1007/s11538-015-0070-z
Kyriacou, P. A. ORCID: 0000-0002-2868-485X, Charlton, P. H., Al-Halawani, R. & Shelley, K. H. (2022).
Inaccuracy of pulse oximetry with dark skin pigmentation: clinical implications and need for improvement.
British Journal of Anaesthesia,
doi: 10.1016/j.bja.2022.03.011
Kyriacou, P. A. & Phillips, J. P. (2014). Comparison of methods for determining pulse arrival time from Doppler and photoplethysmography signals. 36th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), pp. 3809-3812. ISSN 1557-170X doi: 10.1109/EMBC.2014.6944453
Kyriazis, N. (2018). Simulation of cavitation using compressible flow solvers. (Unpublished Doctoral thesis, City, University of London)
Köhnen, C. (2016). Autonomous Quality of Service management and policing in unmanaged Local Area Networks. (Unpublished Doctoral thesis, City, University of London)
Laksar, Saroj Kumar (1971). Solutions of certain boundary integral equations in potential theory. (Unpublished Doctoral thesis, City, University of London)
Lampakis, Elisa G (1995). Algebraic synthesis methods for linear multivariable control systems. (Unpublished Doctoral thesis, City University)
Lawrence, S.A. (1984). The manufacture and commercial applications of metastannic acid and of tin dioxide based semiconducting materials. (Unpublished Doctoral thesis, City University London)
Lazareva, A. (2017). An automated image processing system for the detection of photoreceptor cells in adaptive optics retinal images. (Unpublished Doctoral thesis, City, University of London)
Leaning, M. S. (1980). The validity and validation of mathematical models: Methodological, theoretical, and practical studies with emphasis on the modelling of complex biological systems. (Unpublished Doctoral thesis, The City University)
Leventides, J. & Karcanias, N. (2008). Structured squaring down and zero assignment. International Journal of Control, 81(2), pp. 294-306. doi: 10.1080/00207170701413843
Leventides, J., Petroulakis, G. & Karcanias, N. (2016). Distance Optimization and the Extremal Variety of the Grassmann Variety. Journal of Optimization Theory and Applications, 169(1), pp. 1-16. doi: 10.1007/s10957-015-0840-7
Lewis, D., Zugarini, A. & Alonso, E. ORCID: 0000-0002-3306-695X (2021).
Syllable Neural Language Models for English Poem Generation.
Paper presented at the 12th International Conference on Computational Creativity (ICCC'21), 14-18 Sep 2021.
Li, F. (2015). Context-Aware Attribute-Based Techniques for Data Security and Access Control in Mobile Cloud Environment. (Unpublished Doctoral thesis, City University London)
Limantseva, O. ORCID: 0000-0003-2764-4415, Halikias, G.
ORCID: 0000-0003-1260-1383 & Karcanias, N. (2020).
Structured singular value of implicit systems.
Mathematical Methods in the Applied Sciences,
doi: 10.1002/mma.6980
Linckelmann, . (2013). ON INVERSE CATEGORIES AND TRANSFER IN COHOMOLOGY. PROCEEDINGS OF THE EDINBURGH MATHEMATICAL SOCIETY, 56(1), pp. 187-210. doi: 10.1017/S0013091512000211
Little, John Antony (1984). Engineering properties of glacial tills in the Vale of St. Albans. (Unpublished Doctoral thesis, City, University of London)
Liu, Y., Roemisch, W. & Xu, H. (2014). Quantitative stability analysis of stochastic generalized equations. SIAM Journal on Optimization, 24(1), pp. 467-497. doi: 10.1137/120880434
Livada, M. (2017). Implicit network descriptions of RLC networks and the problem of re-engineering. (Unpublished Doctoral thesis, City, University of London)
Llapashtica, E. (2019). Eye Movements & the Integrated Saccade Latency Test. (Unpublished Doctoral thesis, City, University of London)
Lloyd, Thomas (2016). Advancing integrability for strings in AdS3/CFT2. (Unpublished Doctoral thesis, City University London)
Lockerbie, J., Maiden, N., Engmann, J. , Randall, D., Jones, S. & Bush, D. (2012). Exploring the impact of software requirements on system-wide goals: a method using satisfaction arguments and i* goal modelling. REQUIREMENTS ENGINEERING, 17(3), pp. 227-254. doi: 10.1007/s00766-011-0138-8
Lockett, John Francis (1987). Heat Transfer from Roughened Surfaces using Laser Interferometry. (Unpublished Doctoral thesis, City, University of London)
Lockett, R. D. & Jeshani, M. (2013). An experimental investigation into the effect of hydrodynamic cavitation on diesel. International Journal of Engine Research, 14(6), pp. 606-621. doi: 10.1177/1468087413497005
Lucic, I. (2010). Risk and Safety in Engineering Processes. (Unpublished Doctoral thesis, City University London)
Ma, Q. & Yan, S. (2009). QALE-FEM for numerical modelling of non-linear interaction between 3D moored floating bodies and steep waves. INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, 78(6), pp. 713-756. doi: 10.1002/nme.2505
Mahbub, K. & Spanoudakis, G. (2010). A Framework for Proactive SLA Negotiation. In: Cordeiro, J.A.M., Virvou, M. & Shishkov, B. (Eds.), A Framework for Proactive SLA Negotiation. (pp. 251-256). SciTePress. doi: 10.5220/0003040902510256
Majid, M. Shaheen (2000). Effectiveness of Malaysian Agricultural Libraries. (Unpublished Doctoral thesis, City, University of London)
Malekpoor, Somayeh (2016). Optimization methods for deadbeat control design: a state space approach. (Unpublished Doctoral thesis, City University London)
Man, S.K.F. (2004). Semi-rigid behaviour of plane timber structures. (Unpublished Doctoral thesis, City University London)
Mansour, M. (2004). Issues in on-line optimisation. (Unpublished Doctoral thesis, City University London)
Marian, L. & Giaralis, A. (2014). Optimal design of a novel tuned mass-damper-inerter (TMDI) passive vibration control configuration for stochastically support-excited structural systems. Probabilistic Engineering Mechanics, 38, pp. 156-164. doi: 10.1016/j.probengmech.2014.03.007
Marian, Laurentiu (2015). The tuned mass damper inerter for passive vibration control and energy harvesting in dynamically excited structural systems. (Unpublished Doctoral thesis, City University London)
Markides, Christos (2014). Implementation of the Finite Difference Time Domain algorithm for the analysis of terahertz waves. (Unpublished Doctoral thesis, City University, London)
Mattheus, W. & Brücker, C. (2011). Asymmetric glottal jet deflection: differences of two- and three-dimensional models. The Journal of the Acoustical Society of America (JASA), 130(6), EL373 -EL379. doi: 10.1121/1.3655893
May, J. M., Kyriacou, P. A., Honsel, M. & Petros, A. J. (2012). Photoplethysmographic and SpO(2) readings from the neonatal anterior fontanelle: a case study. Conference proceedings : ... Annual International Conference of the IEEE Engineering in Medicine and Biology Society. IEEE Engineering in Medicine and Biology Society., 2012, pp. 1619-1622. doi: 10.1109/EMBC.2012.6346255
May, J.M., Kyriacou, P. A. & Petros, A. J. (2011). Development of an Optoelectronic Sensor for the Investigation of Photoplethysmographic Signals from the Anterior Fontanel of the Newborn. Paper presented at the Engineering in Medicine and Biology Society, EMBC, 2011 Annual International Conference of the IEEE, Aug. 30 2011-Sept. 3 2011, Boston, MA. doi: 10.1109/IEMBS.2011.6089886
May, J.M., Phillips, J. P. ORCID: 0000-0003-3486-3704, Snidvongs, S. & Kyriacou, P. A.
ORCID: 0000-0002-2868-485X (2019).
The Sensing Endotracheal Tube.
2019 41st Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC),
pp. 3217-3220.
ISSN 1558-4615
doi: 10.1109/EMBC.2019.8856662
Mazzanti, G., Castellon, J., Chen, G. , Fothergill, J., Fu, M., Hozumi, N., Lee, J. H., Li, J., Marzinotto, M., Mauseth, F., Morshuis, P., Reed, C., Troia, I., Tzimas, A. & Wu, K. (2019). The Insulation of HVDC Extruded Cable System Joints. Part 1: Review of Materials, Design and Testing Procedures. IEEE Transactions on Dielectrics and Electrical Insulation, 26(3), pp. 964-972. doi: 10.1109/TDEI.2019.007916
McGuinness Abdollahi, Zahra (2015). Intra-operative optical monitoring of bowel tissue viability based on photoplethysmography and laser doppler flowmetry. (Unpublished Doctoral thesis, City University London)
McLaren, S. (1987). High-resolution ultrasonic non-destructive testing. (Unpublished Doctoral thesis, City University London)
Mejía-Mejía, E. ORCID: 0000-0002-5357-4329, May, J.M.
ORCID: 0000-0002-8659-756X & Kyriacou, P. A.
ORCID: 0000-0002-2868-485X (2022).
Effects of using different algorithms and fiducial points for the detection of interbeat intervals, and different sampling rates on the assessment of pulse rate variability from photoplethysmography.
Computer Methods and Programs in Biomedicine, 218,
106724.
doi: 10.1016/j.cmpb.2022.106724
Mendis, Hashan R, Audsley, N. C. ORCID: 0000-0003-3739-6590 & Indrusiak, L. S. (2017).
Dynamic and static task allocation for hard real-time video stream decoding on NoCs.
Leibniz Transactions on Embedded Systems, 4,
doi: 10.4230/LITES-v004-i002-a001
Mergos, P.E. & Beyer, K. (2015). Displacement-based seismic design of symmetric single-storey wood-frame buildings with the aid of N2 method. Frontiers in Built Environment, 1, .10. doi: 10.3389/fbuil.2015.00010
Mergos, P.E. & Beyer, K. (2014). Modelling shear-flexure interaction in equivalent frame models of slender reinforced concrete walls. Structural Design of Tall and Special Buildings, 23(15), pp. 1171-1189. doi: 10.1002/tal.1114
Mergos, P.E. & Kappos, A.J. (2012). A gradual spread inelasticity model for R/C beam-columns, accounting for flexure, shear and anchorage slip. ENGINEERING STRUCTURES, 44, pp. 94-106. doi: 10.1016/j.engstruct.2012.05.035
Messer, Alan (1999). A Market Model for Controlled Resource Allocation in Distributed Operating Systems. (Unpublished Doctoral thesis, City, University of London)
Mikulich, V., Nassauer, B., Kuna, M. & Brücker, C. (2015). Experimental and numerical study of interaction between particle loaded fluid and a rough wall with micropillars. Tribology International, 83(March), pp. 42-50. doi: 10.1016/j.triboint.2014.10.009
Milne, A. & Maiden, N. (2012). Power and politics in requirements engineering: embracing the dark side?. Requirements Engineering, 17(2), pp. 83-98. doi: 10.1007/s00766-012-0151-6
Mistry, D., Zhang, Q., Perra, N. & Baronchelli, A. (2015). Committed activists and the reshaping of status-quo social consensus. Physical Review E, 92, 042805.. doi: 10.1103/PhysRevE.92.042805
Mitroglou, N. & Gavaises, M. (2013). Mapping of cavitating flow regimes in injectors for medium-/heavy-duty diesel engines. International Journal of Engine Research, 14(6), pp. 590-605. doi: 10.1177/1468087413500491
Moghaddam, E.R., Long, C. & Sayma, A. I. (2013). A numerical investigation of moment coefficient and flow structure in a rotor-stator cavity with rotor-mounted bolts. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY, 227(3), doi: 10.1177/0957650912473543
Mohannadi, F.K. (1987). A framework for fuzzy topology with particular reference to sequentiality and countability. (Unpublished Doctoral thesis, City University London)
Monti, A (2019). High-fidelity simulations of fully submerged, rigid canopy flows. (Unpublished Doctoral thesis, City, University of London)
Morar, N., Roy, R. ORCID: 0000-0001-5491-7437, Mehnen, J. , Nicholls, J. R. & Gray, S. (2017).
The effect of trepanning speed of laser drilled acute angled cooling holes on the high temperature low cycle corrosion fatigue performance of CMSX-4 at 850 °C.
International Journal of Fatigue, 102,
pp. 112-120.
doi: 10.1016/j.ijfatigue.2017.04.017
Morar, N. I., Roy, R. ORCID: 0000-0001-5491-7437, Gray, S. , Nicholls, J. & Mehnen, J. (2018).
Modelling the influence of laser drilled recast layer thickness on the fatigue performance of CMSX-4.
Procedia Manufacturing, 16,
pp. 67-74.
doi: 10.1016/j.promfg.2018.10.173
Morar, N. I., Roy, R. ORCID: 0000-0001-5491-7437, Mehnen, J. , Marithumu, S., Gray, S., Roberts, T. & Nicholls, J. (2018).
Investigation of recast and crack formation in laser trepanning drilling of CMSX-4 angled holes.
The International Journal of Advanced Manufacturing Technology, 95(9-12),
pp. 4059-4070.
doi: 10.1007/s00170-017-1481-9
Musaj, M (2010). Computational and Experimental Investigation of the Aerodynamics of a W-shaped leading edge reversed delta plan-form wing. (Unpublished Doctoral thesis, City, University of London)
Nama, S. (2008). The numerical modelling of composite floors exposed to fire. (Unpublished Doctoral thesis, City University London)
Naz, A., Brooks, S. J. ORCID: 0000-0002-5712-7358 & Roy, R.
ORCID: 0000-0001-5491-7437 (2022).
Investigation of future applications of self-engineering using drones.
Materials Today: Proceedings,
doi: 10.1016/j.matpr.2022.03.717
Netkachova, K. & Bloomfield, R. E. (2016). Security-Informed Safety. Computer, 49(6), pp. 98-102. doi: 10.1109/MC.2016.158
Nezhad, H. Y., Zhao, Y., Liddel, P. D. , Marchante, V. & Roy, R. ORCID: 0000-0001-5491-7437 (2017).
A novel process-linked assembly failure model for adhesively bonded composite structures.
CIRP Annals, 66(1),
pp. 29-32.
doi: 10.1016/j.cirp.2017.04.103
Nguyen, T.H., Lin, Y. C., Chen, C. T. , Surre, F., Venugopalan, T., Sun, T. & Grattan, K. T. V. (2009). Fibre optic chloride sensor based on fluorescence quenching of an acridinium dye. Proceedings of SPIE, 7503, doi: 10.1117/12.835607
Nguyen, T.H., Sun, T., Grattan, K. T. V. & Hardwick, S. (2010). A fibre-optic chemical sensor for the detection of cocaine. Proceedings of SPIE, 76531V, doi: 10.1117/12.866496
Njoum, H. (2017). Investigations of photoplethysmography in the assessment of haemodynamics, vascular mechanics and haemorheology. (Unpublished Doctoral thesis, City, University of London)
Nunes, Paulo (2014). Holistic risk management in commercial air transport. A methodology to apply ISO 31000 to the airline industry. (Unpublished Doctoral thesis, City University London)
Nykteri, G. (2021). Development of a multiscale two-fluid approach with application to droplet dynamics. (Unpublished Doctoral thesis, City, University of London)
O'Donnell, A.D. (1993). Chemical modification of the surface of wool. (Unpublished Doctoral thesis, City University London)
Odense, S. (2019). Layerwise symbolic knowledge extraction from deep neural networks. (Unpublished Doctoral thesis, City, University of London)
Okoh, C., Roy, R. ORCID: 0000-0001-5491-7437 & Mehnen, J. (2017).
Maintenance Informatics Dashboard Design for Through-life Engineering Services.
Procedia CIRP, 59,
pp. 166-171.
doi: 10.1016/j.procir.2016.09.019
Okoh, C., Roy, R. ORCID: 0000-0001-5491-7437 & Mehnen, J. (2017).
Predictive Maintenance Modelling for Through-Life Engineering Services.
Procedia CIRP, 59,
pp. 196-201.
doi: 10.1016/j.procir.2016.09.033
Pagani, Alfonso (2016). Strong-form governing equations and solutions for variable kinematic beam theories with practical applications. (Unpublished Doctoral thesis, City, University of London)
Palmarini, R., Erkoyuncu, J. A., Roy, R. ORCID: 0000-0001-5491-7437 & Torabmostaedi, H. (2018).
A systematic review of augmented reality applications in maintenance.
Robotics and Computer-Integrated Manufacturing, 49,
pp. 215-228.
doi: 10.1016/j.rcim.2017.06.002
Palmarini, R., Fernandez del Amo, I., Bertolino, G. , Dini, G., Erkoyuncu, J. A., Roy, R. ORCID: 0000-0001-5491-7437 & Farnsworth, M. (2018).
Designing an AR interface to improve trust in Human-Robots collaboration.
Procedia CIRP, 70,
pp. 350-355.
doi: 10.1016/j.procir.2018.01.009
Palmirini, R., Erkoyuncu, J. A. & Roy, R. ORCID: 0000-0001-5491-7437 (2017).
An Innovative Process to Select Augmented Reality (AR) Technology for Maintenance.
Procedia CIRP, 59,
pp. 23-28.
doi: 10.1016/j.procir.2016.10.001
Pancholi, M. (2010). Towards an Intelligent Intervertebral Disc Prosthesis for the Assessment of Spinal Loading. (Unpublished Doctoral thesis, City University London)
Papadopoulos, Konstantinos (2015). Flow effect on thrombus formation in stenosed coronary arteries: a computational study. (Unpublished Doctoral thesis, City University London)
Papadrakakis, Manolis (1978). Gradient and relaxation nonlinear techniques for the analysis of cable supported structures. (Unpublished Doctoral thesis, City, University of London)
Papanagnou, C.I. (2007). Modelling, optimisation and control of series supply chains and production processes. (Unpublished Doctoral thesis, City University London)
Papoutsakis, A., Rybdylova, O. D., Zaripov, T. S. , Danaila, L., Osiptsov, A. N. & Sazhin, S. S. (2018). Modelling of the evolution of a droplet cloud in a turbulent flow. International Journal of Multiphase Flow, 104, pp. 233-257. doi: 10.1016/j.ijmultiphaseflow.2018.02.014
Papoutsakis, A., Sazhin, S., Begg, S. , Danaila, I. & Luddens, F. (2018). An efficient Adaptive Mesh Refinement (AMR) algorithm for the Discontinuous Galerkin method: Applications for the computation of compressible two-phase flows. Journal of Computational Physics, 363, pp. 399-427. doi: 10.1016/j.jcp.2018.02.048
Parisaca Vargas, Abigail (2021). An ontology-based analysis method for assessing and improving the quality of hazard analysis results. (Unpublished Doctoral thesis, City, University of London)
Patel, Z (2019). Development of an intraluminal photoplethysmography sensor for the assessment of bowel viability. (Unpublished Doctoral thesis, City, University of London)
Pearce, O.C. (2011). Systems analysis of the technoeconomic investment required for coal generation with carbon capture and storage. (Unpublished Doctoral thesis, City University London)
Petropoulou, S. (2006). Adjoint-based geometry optimisation with applications to automotive fuel injector nozzles. (Unpublished Doctoral thesis, City University London)
Petroulakis, N. E., Askoxylakis, I. G., Traganitis, A. & Spanoudakis, G. (2013). A privacy-level model of user-centric cyber-physical systems. Lecture Notes in Computer Science, 8030, pp. 338-347. doi: 10.1007/978-3-642-39345-7-36
Pfeil, U., Zaphiris, P. & Wilson, S. (2010). The role of message-sequences in the sustainability of an online support community for older people. JOURNAL OF COMPUTER-MEDIATED COMMUNICATION, 15(2), doi: 10.1111/j.1083-6101.2010.01523.x
Phan, Minh Son (1989). Dynamic Response Function and the Theory of Spin Waves in Metallic Overlayers. (Unpublished Doctoral thesis, City, University of London)
Phillips, J. P., George, K., Kyriacou, P. A. & Langford, R. M. (2009). Investigation of Photoplethysmographic Changes using a Static Compression Model of Spinal Cord Injury. Paper presented at the EMBC 2009. Annual International Conference of the IEEE, 3-6 Sept. 2009, Minneapolis, MN. doi: 10.1109/IEMBS.2009.5334166
Phillips, J. P., Hickey, M. & Kyriacou, P. A. (2011). Electro-optical Plethysmography for Non-invasive Estimation of Hemoglobin Concentration. Paper presented at the 2011 Annual International Conference of the IEEE, Aug. 30 2011-Sept. 3 2011, Boston, MA. doi: 10.1109/IEMBS.2011.6091079
Phillips, J. P., Kyriacou, P. A., George, K. & Langford, R. M. (2010). Optical measurement of blood flow changes in spinal cord injury. Journal of Physics: Conference Series, 238(1), 012060. doi: 10.1088/1742-6596/238/1/012060
Phillips, J. P., Kyriacou, P. A. & Jones, D. P. (2010). Calculation of Photon Path Changes due to Scatter in Monte Carlo Simulations. Conference proceedings : ... Annual International Conference of the IEEE Engineering in Medicine and Biology Society. IEEE Engineering in Medicine and Biology Society. Conference, pp. 4959-4962. ISSN 1557-170X doi: 10.1109/IEMBS.2010.5627216
Phillips, J. P., Kyriacou, P. A., Jones, D. P. , Shelley, K. H. & Langford, R. M. (2008). Pulse oximetry and photoplethysmographic waveform analysis of the esophagus and bowel. Current opinion in anesthesiology, 21(6), pp. 779-783. doi: 10.1097/ACO.0b013e328317794d
Phillips, J. P., Langford, R. M., Chang, S. H. , Maney, K., Kyriacou, P. A. & Jones, D. P. (2010). Cerebral Arterial Oxygen Saturation Measurements Using a Fiber-Optic Pulse Oximeter. Neurocritical Care, 13(2), pp. 278-285. doi: 10.1007/s12028-010-9349-y
Phillips, J. P., Langford, R. M., Chang, S. H. , Maney, K., Kyriacou, P. A. & Jones, D. P. (2009). Evaluation of a Fiber-optic Esophageal Pulse Oximeter. Paper presented at the EMBC 2009. Annual International Conference of the IEEE, 3-6 Sept. 2009, Minneapolis, MN.
Phillips, J. P., Langford, R. M., Chang, S. H. , Maney, K., Kyriacou, P. A. & Jones, D. P. (2009). Measurements of Cerebral Arterial Oxygen Saturation using a Fiber-optic Pulse Oximeter. Paper presented at the EMBC 2009. Annual International Conference of the IEEE, 3-6 Sept. 2009, Minneapolis, MN. doi: 10.1109/IEMBS.2009.5334604
Phillips, J. P., Langford, R. M., Chang, S. H. , Maney, K., Kyriacou, P. A. & Jones, D. P. (2009). An oesophageal pulse oximetry system utilising a fibre-optic probe. Journal of Physics: Conference Series, 178(1), 012021. doi: 10.1088/1742-6596/178/1/012021
Phillips, J. P., Langford, R. M., Kyriacou, P. A. & Jones, D. P. (2008). Preliminary evaluation of a new fibre-optic cerebral oximetry system. Physiological Measurement, 29(12), p. 1383. doi: 10.1088/0967-3334/29/12/003
Ponitz, B., Schmitz, A., Fischer, D. , Bleckmann, H. & Brücker, C. (2014). Diving-flight aerodynamics of a peregrine falcon (Falco peregrinus). PLoS ONE, 9(2), pp. 1-13. doi: 10.1371/journal.pone.0086506
Ponitz, B., Triep, M. & Brücker, C. (2014). Aerodynamics of the Cupped Wings during Peregrine Falcon’s Diving Flight. Open Journal of Fluid Dynamics, 4(4), doi: 10.4236/ojfd.2014.44027
Popov, P. T. (2013). Bayesian reliability assessment of legacy safety-critical systems upgraded with fault-tolerant off-the-shelf software. Reliability Engineering & System Safety, 117(Sept), pp. 98-113. doi: 10.1016/j.ress.2013.03.017
Price, L. ORCID: 0000-0001-7747-4210 (2017).
The Special Collections Handbook (2nd edition).
Reference Reviews, 31(6),
pp. 8-9.
doi: 10.1108/rr-04-2017-0088
Price, L. ORCID: 0000-0001-7747-4210 (2016).
Survey of Historic Costume (6th edition).
Reference Reviews, 30(5),
pp. 20-21.
doi: 10.1108/rr-02-2016-0048
Procopiou, A. (2021). ForChaosLR: A Lightweight Multi-Layer IDS to detect application layer DDoS attacks in the smart home-smart grid network. (Unpublished Doctoral thesis, City, University of London)
Qassem, M. & Kyriacou, P. A. (2012). In vitro spectrophotometric near infrared measurements of skin absorption and dehydration. Conference proceedings : ... Annual International Conference of the IEEE Engineering in Medicine and Biology Society. IEEE Engineering in Medicine and Biology Society., 2012, pp. 6044-6047. doi: 10.1109/EMBC.2012.6347372
Rahulamathavan, Y., Veluru, S., Phan, R. C. , Chambers, J. A. & Rajarajan, M. (2014). Privacy-preserving clinical decision support system using gaussian kernel-based classification. IEEE Journal of Biomedical and Health Informatics, 18(1), pp. 56-66. doi: 10.1109/JBHI.2013.2274899
Rajarajan, M. (2015). A review paper on preserving privacy in mobile environments. Journal of Computer Networks and Applications, 53, pp. 74-90. doi: 10.1016/j.jnca.2015.01.008
Rajarajan, M., Zaidi, K., Nallanathan, A, , Rakocevic, V. & Milojevic, M, (2016). Host Based Intrusion Detection for VANETs: A statistical approach to Rogue Node Detection. IEEE Transactions on Vehicular Technology, 65(8), pp. 6703-6714. doi: 10.1109/TVT.2015.2480244
Rangiha, M. E. (2016). A framework for social BPM based on social tagging. (Unpublished Doctoral thesis, City University London)
Rentzos, P. (2007). Active vibration control of civil engineering structures. (Unpublished Doctoral thesis, City University London)
Reyes-Aldasoro, C. C. ORCID: 0000-0002-9466-2018, Akerman, S. & Tozer, G.M. (2008).
Measuring the velocity of fluorescently labelled red blood cells with a keyhole tracking algorithm..
Journal Of Microscopy, 229(Pt 1),
pp. 162-173.
doi: 10.1111/j.1365-2818.2007.01877.x
Reyes-Aldasoro, C. C., Björndahl, M. A., Akerman, S. , Ibrahim, J., Griffiths, M. K. & Tozer, G. M. (2012). Online chromatic and scale-space microvessel-tracing analysis for transmitted light optical images. Microvascular Research, 84(3), pp. 330-339. doi: 10.1016/j.mvr.2012.09.002
Rios-Amaya, J., Roy, R. ORCID: 0000-0001-5491-7437, Planas, D. , Cochi, F., Shermon, D. & Razzaq, S. (2016).
A process centred virtual approach to support cost estimating along product life cycle.
Paper presented at the 2006 IEEE International Technology Management Conference (ICE), 26-28 Jun 2006, Milan, Italy.
Robinson, Sionade Ann (1990). The utility of analogy in systems sciences. (Unpublished Doctoral thesis, City University)
Rose, A.V. (2012). Behavior and efficiency of perimeter pile groups. (Unpublished Doctoral thesis, City University London)
Roy, R. ORCID: 0000-0001-5491-7437 (2017).
Foreword.
Procedia CIRP, 59,
p. 1.
doi: 10.1016/j.procir.2017.02.010
Roy, R. ORCID: 0000-0001-5491-7437 (2015).
Foreword.
Procedia CIRP, 38,
pp. 1-2.
doi: 10.1016/j.procir.2015.08.099
Roy, R. ORCID: 0000-0001-5491-7437 (2014).
Foreword.
Procedia CIRP, 22,
pp. 1-2.
doi: 10.1016/j.procir.2014.08.012
Roy, R. ORCID: 0000-0001-5491-7437 (2005).
Virtual Cost Engineering Studio (V-CES): a framework for Cost Engineering services.
Paper presented at the 2005 IEEE International Technology Management Conference (ICE), 20-22 Jun 2005, Munich, Germany.
Roy, R. ORCID: 0000-0001-5491-7437, Stark, R., Tracht, K. , Takata, S. & Mori, M. (2016).
Continuous maintenance and the future - Foundations and technological challenges.
CIRP Annals, 65(2),
pp. 667-688.
doi: 10.1016/j.cirp.2016.06.006
Russell-Rose, T. & MacFarlane, A. ORCID: 0000-0002-8057-0737 (2020).
Towards Explainability in Professional Search.
Paper presented at the The 3rd International Workshop on ExplainAble Recommendation and Search (EARS 2020), 30 July 2020, Xi'an, China.
Rybynok, V., Kyriacou, P. A., Binnersley, J. & Woodcock, A. (2010). Development of a personal electronic health record card in the United Kingdom. Conference proceedings : ... Annual International Conference of the IEEE Engineering in Medicine and Biology Society. IEEE Engineering in Medicine and Biology Society. Conference, pp. 4431-4435. ISSN 1557-170X doi: 10.1109/IEMBS.2010.5626004
Rybynok, V.O. & Kyriacou, P. A. (2007). A systematic approach for the accurate non-invasive estimation of blood glucose utilizing a novel light-tissue interaction adaptive modelling scheme. Journal of Physics: Conference Series, 85(012033), doi: 10.1088/1742-6596/85/1/012033
Sanayei, M., Chen, X., Chicharro, D. ORCID: 0000-0002-4038-258X , Distler, C., Panzeri, S. & Thiele, A. (2018).
Perceptual learning of fine contrast discrimination changes neuronal tuning and population coding in macaque V4.
Nat Commun, 9(1),
4238.
doi: 10.1038/s41467-018-06698-w
Schwarze, R., Mattheus, W., Klostermann, J. & Brücker, C. (2011). Starting jet flows in a three-dimensional channel with larynx-shaped constriction. Computers and Fluids, 48(1), pp. 68-83. doi: 10.1016/j.compfluid.2011.03.016
Scott, R.H., Banerji, P., Chikermane, S. , Srinivasan, S., Basheer, P.A.M., Surre, F., Sun, T. & Grattan, K. T. V. (2013). Commissioning and Evaluation of a Fiber-Optic Sensor System for Bridge Monitoring. IEEE Sensors Journal, 13(7), pp. 2555-2562. doi: 10.1109/JSEN.2013.2256599
Serwene, P. (2021). The equivalence of exotic and block-exotic fusion systems. (Unpublished Doctoral thesis, City, University of London)
Shafique, M. & Kyriacou, P. A. (2012). Photoplethysmographic signals and blood oxygen saturation values during artificial hypothermia in healthy volunteers. Physiological Measurement, 33(12), pp. 2065-2078. doi: 10.1088/0967-3334/33/12/2065
Shafique, M., Kyriacou, P. A. & Pal, S. K. (2012). Investigation of photoplethysmographic signals and blood oxygen saturation values on healthy volunteers during cuff-induced hypoperfusion using a multimode PPG/SpO2 sensor. Medical and Biological Engineering and Computing, 50(6), pp. 575-583. doi: 10.1007/s11517-012-0910-z
Shafique, M., Phillips, J. P. & Kyriacou, P. A. (2010). Evaluation of a multimode photoplethysmographic sensor during cuff-induced hypoperfusion. Conference proceedings : ... Annual International Conference of the IEEE Engineering in Medicine and Biology Society. IEEE Engineering in Medicine and Biology Society. Conference, pp. 1024-1027. ISSN 1557-170X doi: 10.1109/IEMBS.2010.5627730
Shafique, M., Phillips, J. P. & Kyriacou, P. A. (2009). A novel non-invasive trans-reflectance photoplethysmographic probe for use in cases of low peripheral blood perfusion. Conference proceedings : ... Annual International Conference of the IEEE Engineering in Medicine and Biology Society. IEEE Engineering in Medicine and Biology Society. Conference, doi: 10.1109/IEMBS.2009.5334165
Shafqat, K. (2010). Heart Rate Variability analysis in patients undergoing local anesthesia. (Unpublished Doctoral thesis, City, University of London)
Shafqat, K., Pal, S. K., Kumari, S. & Kyriacou, P. A. (2009). Empirical Mode Decomposition (EMD) analysis of HRV data from locally anesthetized patients. Paper presented at the EMBC 2009. Annual International Conference of the IEEE, 3-6 Sept. 2009, Minneapolis, MN. doi: 10.1109/IEMBS.2009.5335000
Shakibaei, B. H., Flusser, J., Zhao, Y. , Erkoyuncu, J. A. & Roy, R. ORCID: 0000-0001-5491-7437 (2021).
DCT/IDCT filter design for ultrasound image filtering.
Paper presented at the 25th International Conference on Pattern Recognition (ICPR), 10-15 Jan 2021, Milan, Italy.
doi: 10.1109/ICPR48806.2021.9412838
Shearman, P. (2010). Regional economic benefits of air services versus the environmental cost of emissions. (Unpublished Doctoral thesis, City University London)
Shen, J., Erkoyuncu, J. A., Roy, R. ORCID: 0000-0001-5491-7437 & Wu, B. (2017).
A framework for cost evaluation in product service system configuration.
International Journal of Production Research, 55(20),
pp. 6120-6144.
doi: 10.1080/00207543.2017.1325528
Shittu, Riyanat O. (2016). Mining intrusion detection alert logs to minimise false positives & gain attack insight. (Unpublished Doctoral thesis, City University London)
Sirikham, A., Zhao, Y., Nezhad, H. Y. , Du, W. & Roy, R. ORCID: 0000-0001-5491-7437 (2019).
Estimation of Damage Thickness in Fiber-Reinforced Composites using Pulsed Thermography.
IEEE Transactions on Industrial Informatics, 15(1),
pp. 445-453.
doi: 10.1109/TII.2018.2878758
Skrekas, P. (2018). Seismic structural assessment scenarios of RC structures subjected to pounding. (Unpublished Doctoral thesis, City, University of London)
Skrekas, P., Sextos, A. & Giaralis, A. (2014). Influence of bi-directional seismic pounding on the inelastic demand distribution of three adjacent multi-storey R/C buildings. Earthquakes and Structures, 6(1), pp. 71-87. doi: 10.12989/eas.2014.6.1.071
Skupsch, C., Klotz, T., Chaves, H. & Brücker, C. (2012). Channelling optics for high quality imaging of sensory hair. Review of Scientific Instruments, 83(045001), doi: 10.1063/1.3697997
Solis-Lemus, J. A. (2018). Segmentation and shape tracking of overlapping macrophages in fluorescent microscopy images. (Unpublished Doctoral thesis, City, University of London)
Soltanahmadi, Abbasali (1988). Dynamics of Flexible Riser Systems. (Unpublished Doctoral thesis, City, University of London)
Song, Guangming (1988). An application of computer aided design and computer aided draughting techniques to gearing.. (Unpublished Doctoral thesis, The City University)
Song, J. (2020). Rigorous characterisation of photonic devices incorporating novel phase change materials. (Unpublished Doctoral thesis, City, University of London)
Sriram, V. & Ma, Q. (2012). Improved MLPG_R method for simulating 2D interaction between violent waves and elastic structures. Journal of Computational Physics, 231(22), pp. 7650-7670. doi: 10.1016/j.jcp.2012.07.003
Sriratanavaree, S. (2014). The characterisation of acoustic waves in optical waveguides. (Unpublished Doctoral thesis, City University London)
Sriratanavaree, S., Rahman, B. M., Leung, D. M. H. , Kejalakshmy, N. & Grattan, K. T. V. (2014). Full-Vectorial Finite-Element Analysis of Acoustic Modes in Silica Waveguides. IEEE Journal of Quantum Electronics, 50(12), pp. 1006-1013. doi: 10.1109/JQE.2014.2364199
Stankovic, S. B. & Kyriacou, P. A. (2011). Comparison of thermistor linearization techniques for accurate temperature measurement in phase change materials. Journal of Physics: Conference Series, 307(1), 012009. doi: 10.1088/1742-6596/307/1/012009
Stanković, S. B. & Kyriacou, P. A. (2012). The effects of thermistor linearization techniques on the T-history characterization of phase change materials. Applied Thermal Engineering, 44(Nov), pp. 78-84. doi: 10.1016/j.applthermaleng.2012.03.032
Starnini, M., Baronchelli, A. & Pastor-Satorras, R. (2014). Model reproduces individual, group and collective dynamics of human contact networks.
Tahir, S. (2018). Privacy preserving search in large encrypted databases. (Unpublished Doctoral thesis, City, University of London)
Takanobu, T (2021). Non-Hermitian Quantum Field Theory. (Unpublished Doctoral thesis, City, University of London)
Tanghetti, G. (2021). Stability of Working Platforms for Tracked Plant. (Unpublished Doctoral thesis, City, University of London)
Tawdros, F.H. (1983). Extreme value theory and its application to motor insurance. (Unpublished Doctoral thesis, City University London)
Taylor, H P J (1971). Fundamental Behaviour in Bending and Shear of Reinforced Concrete. (Unpublished Doctoral thesis, City, University of London)
Taylor, R.N., Rose, A.V. & Gorasia, R.J. (2013). Pile and Pile Group Capacity: Some Findings from Centrifuge Tests. International Journal of Geo-Engineering, 5(2), pp. 5-15.
Tedeschi, S., Emmanouilidis, C., Farnsworth, M. , Mehnen, J. & Roy, R. ORCID: 0000-0001-5491-7437 (2017).
New Threats for Old Manufacturing Problems: Secure IoT-Enabled Monitoring of Legacy Production Machinery.
In: Lodding, H., Riedel, R., Thoben, K. D. , von Cieminski, G. & Kitritis, D. (Eds.),
Advances in Production Management Systems. The Path to Intelligent, Collaborative and Sustainable Manufacturing. APMS 2017.
IFIP Advances in Information and Communication Technology (513).
(pp. 391-398). Cham: Springer.
ISBN 9783319669229
doi: 10.1007/978-3-319-66923-6_46
Tedeschi, S., Emmanouilidis, C., Mehnen, J. & Roy, R. ORCID: 0000-0001-5491-7437 (2019).
A Design Approach to IoT Endpoint Security for Production Machinery Monitoring.
Sensors (Basel), 19(10),
2355..
doi: 10.3390/s19102355
Tedeschi, S., Mehnen, J., Tapoglou, N. & Roy, R. ORCID: 0000-0001-5491-7437 (2017).
Secure IoT Devices for the Maintenance of Machine Tools.
Procedia CIRP, 59,
pp. 150-155.
doi: 10.1016/j.procir.2016.10.002
Tedeschi, S., Rodrigues, D., Emmanouilidis, C. , Erkoyuncu, J. & Roy, R. ORCID: 0000-0001-5491-7437 (2018).
A cost estimation approach for IoT modular architectures implementation in legacy systems.
Procedia Manufacturing, 19,
pp. 103-110.
doi: 10.1016/j.promfg.2018.01.015
Tinsley, L., Chalk, C., Nicholls, J. , Mehnen, J. & Roy, R. ORCID: 0000-0001-5491-7437 (2017).
A study of pulsed thermography for life assessment of thin EB-PVD TBCs undergoing oxidation ageing.
NDT & E International, 92,
pp. 67-74.
doi: 10.1016/j.ndteint.2017.08.001
Tonini, S. (2006). Fuel spray modelling in direct-injection diesel and gasoline engines. (Unpublished Doctoral thesis, City University London)
Toor, A. (2020). Enabling Young Individuals to make an Informed Decision about Higher Education: Using Persuasive Technology. (Unpublished Doctoral thesis, City, University of London)
Toor, A. (2020). Enabling young individuals to make an informed about higher education: using persuasive technology. (Unpublished Doctoral thesis, City, University of London)
Tracht, K., Roy, R. ORCID: 0000-0001-5491-7437 & Tomiyama, T. (2018).
Foreword.
Procedia CIRP, 22,
p. 1.
doi: 10.1016/j.promfg.2018.01.001
Triep, M., Hess, D., Chaves, H. , Brücker, C., Balmert, A., Westhoff, G. & Bleckmann, H. (2013). 3D flow in the venom channel of a spitting cobra: do the ridges in the fangs act as fluid guide vanes?. PLoS ONE, 8(5), pp. 1-11. doi: 10.1371/journal.pone.0061548
Turkay, C., Jeanquartier, F., Holzinger, A. & Hauser, H. (2014). On Computationally-Enhanced Visual Analysis of Heterogeneous Data and Its Application in Biomedical Informatics. In: Holzinger, A. & Jurisica, I. (Eds.), Interactive Knowledge Discovery and Data Mining in Biomedical Informatics. Lecture Notes in Computer Science, 8401. (pp. 117-140). Springer Berlin Heidelberg. doi: 10.1007/978-3-662-43968-5_7
Turner, C., Emmanouilidis, C., Tomiyama, T. , Tiwari, A. & Roy, R. ORCID: 0000-0001-5491-7437 (2018).
Intelligent decision support for maintenance: A new role for audit trails.
In: Liyanage, J., Amadi-Echendu, J. & Matthew, J. (Eds.),
Engineering Assets and Public Infrastructures in the Age of Digitalization: Proceedings of the 13th World Congress on Engineering Asset Management (Lecture Notes in Mechanical Engineering).
. Cham, Switzerland: Springer.
ISBN 978-3-030-48020-2
doi: 10.1007/978-3-030-48021-9
Turner, C., Emmanouilidis, C., Tomiyama, T. , Tiwari, A. & Roy, R. ORCID: 0000-0001-5491-7437 (2019).
Intelligent decision support for maintenance: an overview and future trends.
International Journal of Computer Integrated Manufacturing, 32(10),
pp. 936-959.
doi: 10.1080/0951192X.2019.1667033
Turner, Jonathan (2019). Secondary use of electronic medical records for early identification of raised condition likelihoods in individuals: a machine learning approach. (Unpublished Doctoral thesis, City, University of London)
Ul Asad, H. & Jones, K. (2015). Verifying inevitability of phase-locking in a charge pump phase lock loop using sum of squares programming. In: Proceedings of the 25th edition on Great Lakes Symposium on VLSI. (pp. 295-300). New York, USA: ACM. doi: 10.1145/2742060.2742072
Uthman, M., Rahman, B. M., Kejalakshmy, N. , Agrawal, A. & Grattan, K. T. V. (2012). Design and Characterization of Low-Loss Porous-Core Photonic Crystal Fiber. IEEE Photonics Journal, 4(6), pp. 2315-2325. doi: 10.1109/JPHOT.2012.2231939
Veerasamy, Dhamotharan (2019). Effect on flap transition of upstream wake turbulence. (Unpublished Doctoral thesis, City, University of London)
Veluru, S., Rahulamathavan, Y., Viswanath, P. , Longley, P. & Rajarajan, M. (2013). E-mail address categorization based on semantics of surnames. Proceedings of the 2013 IEEE Symposium on Computational Intelligence and Data Mining, CIDM 2013 - 2013 IEEE Symposium Series on Computational Intelligence, SSCI 2013, pp. 222-229. doi: 10.1109/CIDM.2013.6597240
Villa Arango, S. (2020). Application of phononic crystals as liquid sensors for the development of novel point of care technologies. (Unpublished Doctoral thesis, City, University of London)
Viphavakit, C. (2018). Development of gold enhanced surface plasmon resonance polymer and nanowire waveguides for optical sensing. (Unpublished Doctoral thesis, City, University of London)
Vita, Vasiliki (2016). Electricity distribution networks’ analysis with particular references to distributed generation and protection. (Unpublished Doctoral thesis, City University London)
Vogiatzaki, K., Cleary, M. J., Kronenburg, A. & Kent, J. H. (2009). Modeling of scalar mixing in turbulent jet flames by multiple mapping conditioning. Physics of Fluids, 21(2), 025105. doi: 10.1063/1.3081553
Vogiatzaki, K., Kronenburg, A., Cleary, M. J. & Kent, J. H. (2009). Multiple mapping conditioning of turbulent jet diffusion flames. Proceedings of the Combustion Institute, 32(2), pp. 1679-1685. doi: 10.1016/j.proci.2008.06.164
Vrabič, R., Erkoyuncu, J. A., Butala, P. & Roy, R. ORCID: 0000-0001-5491-7437 (2018).
Digital twins: Understanding the added value of integrated models for through-life engineering services.
Procedia Manufacturing, 16,
pp. 139-146.
doi: 10.1016/j.promfg.2018.10.167
Wan, S., Li, D., Gao, J. , Roy, R. ORCID: 0000-0001-5491-7437 & He, F. (2018).
A collaborative machine tool maintenance planning system based on content management technologies.
The International Journal of Advanced Manufacturing Technology, 94(5-8),
pp. 1639-1653.
doi: 10.1007/s00170-016-9829-0
Wan, S., Li, D., Gao, J. , Roy, R. ORCID: 0000-0001-5491-7437 & Tong, Y. (2017).
Process and knowledge management in a collaborative maintenance planning system for high value machine tools.
Computers in Industry, 84,
doi: 10.1016/j.compind.2016.11.002
Wang, H., Audsley, N. C. ORCID: 0000-0003-3739-6590 & Chang, W. (2020).
Addressing resource contention and timing predictability for multi-core architectures with shared memory interconnects.
Paper presented at the 2020 IEEE Real-Time and Embedded Technology and Applications Symposium, 21-24 Apr 2020, Sydney, Australia.
doi: 10.1109/RTAS48715.2020.00-16
Wang, J. (2020). Vortex characteristics of sharp and round step cylinders at high Reynolds numbers. (Unpublished Doctoral thesis, City, University of London)
Wang, J., Erkoyuncu, J. A. & Roy, R. ORCID: 0000-0001-5491-7437 (2018).
A Conceptual Design for Smell Based Augmented Reality: Case Study in Maintenance Diagnosis.
Procedia CIRP, 78,
pp. 109-114.
doi: 10.1016/j.procir.2018.09.067
Wang, Jinghua (2016). A hybrid model for large scale simulation of unsteady nonlinear waves. (Unpublished Doctoral thesis, City University London)
Wilkinson, S.A. (1989). Aspects of radiation curing. (Unpublished Doctoral thesis, City University London)
Wilson, D.T., Hawe, G.I., Coates, G. & Crouch, R.S. (2014). Evaluation of centralised and autonomous routing strategies in major incident response. Safety Science, 70, pp. 80-88. doi: 10.1016/j.ssci.2014.05.001
Wilson, D.T., Hawe, G.I., Coates, G. & Crouch, R.S. (2016). Online optimization of casualty processing in major incident response: An experimental analysis. European Journal of Operational Research, 252(1), pp. 334-348. doi: 10.1016/j.ejor.2016.01.021
Wilson, D.T., Hawe, G.I., Coates, G. & Crouch, R.S. (2013). A multi-objective combinatorial model of casualty processing in major incident response. European Journal of Operational Research, 230(3), pp. 643-655. doi: 10.1016/j.ejor.2013.04.040
Wirasinghe, N E A (1975). Swirling and non-swirling flow in conical diffusers. (Unpublished Doctoral thesis, City, University of London)
Wong, W. H. Y. (2016). The derived category of representations of the special linear group of degree two over a finite field. (Unpublished Doctoral thesis, City, University of London)
Xiao, Y. (2018). Quivers, tilings and branes. (Unpublished Doctoral thesis, City, University of London)
Xu, Fang Yuan (2011). Smart grid framework analysis and artificial neutral network in load forecast. (Unpublished Doctoral thesis, City University London)
Yan, S. (2006). Numerical simulation of nonlinear response of moored floating structures to steep waves. (Unpublished Doctoral thesis, City University London)
Yin, T., Ali, F. & Reyes-Aldasoro, C. C. ORCID: 0000-0002-9466-2018 (2015).
A Robust and Artifact Resistant Algorithm of Ultrawideband Imaging System for Breast Cancer Detection.
IEEE Trans Biomed Eng, 62(6),
pp. 1514-1525.
doi: 10.1109/TBME.2015.2393256
Ysehak Abay, T. (2016). Reflectance photoplethysmography for non-invasive monitoring of tissue perfusion. (Unpublished Doctoral thesis, City, University of London)
Zaidi, K. & Rajarajan, M. (2015). Vehicular Internet: Security & Privacy Challenges and Opportunities. Future Internet, 7, pp. 257-275. doi: 10.3390/fi7030257
Zaman, T., Kyriacou, P. A. & Pal, S. (2011). Development of a Reflectance Photoplethysmographic Sensor used for the Assessment of Free Flap Perfusion. Paper presented at the EBMC 2011, Aug. 30 2011-Sept. 3 2011, Boston, MA. doi: 10.1109/IEMBS.2011.6090995
Zhao, Y., Addepalli, S., Sirikham, A. & Roy, R. ORCID: 0000-0001-5491-7437 (2018).
A confidence map based damage assessment approach using pulsed thermographic inspection.
NDT & E International, 93,
pp. 86-97.
doi: 10.1016/j.ndteint.2017.10.001
Zhao, Y., Mehnen, J., Sirikham, A. & Roy, R. ORCID: 0000-0001-5491-7437 (2017).
A Novel Defect Depth Measurement Method based on Nonlinear System Identification for Pulsed Thermographic Inspection.
Mechanical Systems and Signal Processing, 85,
pp. 382-395.
doi: 10.1016/j.ymssp.2016.08.033
Zhao, Y., Tinsley, L., Addepalli, S. , Mehnen, J. & Roy, R. ORCID: 0000-0001-5491-7437 (2016).
A coefficient clustering analysis for damage assessment of composites based on pulsed thermographic inspection.
NDT & E International, 83,
pp. 59-67.
doi: 10.1016/j.ndteint.2016.06.003
Zhou, J. (2010). Numerical Investigation of breaking waves and their interations with structures using MLPG_R method. (Unpublished Doctoral thesis, City University London)
Zhou, L. (2010). Smart grid analysis with particular references to power quality and load forecast. (Unpublished Doctoral thesis, City University London)
Ziai, Y. (1979). Statistical models of claim amount distributions in general insurance. (Unpublished Doctoral thesis, City University London)
de Penning, L., Garcez, A., Lamb, L. C. & Meyer, J-J. C. (2011). A Neural-Symbolic Cognitive Agent for Online Learning and Reasoning. In: Proceedings of the Twenty-Second international joint conference on Artificial Intelligence. (pp. 1653-1658). International Joint Conferences on Artificial Intelligence. doi: 10.5591/978-1-57735-516-8/IJCAI11-278
del Amo, I. F., Erkoyuncu, J. A., Roy, R. ORCID: 0000-0001-5491-7437 , Palmarini, R. & Onoufriou, D. (2018).
A systematic review of Augmented Reality content-related techniques for knowledge transfer in maintenance applications.
Computers in Industry, 103,
pp. 47-71.
doi: 10.1016/j.compind.2018.08.007
del Amo, I. F., Galeotti, E., Palmarini, R. , Dini, G., Erkoyuncu, J. & Roy, R. ORCID: 0000-0001-5491-7437 (2018).
An innovative user-centred support tool for Augmented Reality maintenance systems design: a preliminary study.
Procedia CIRP, 70,
pp. 362-367.
doi: 10.1016/j.procir.2018.02.020