City Research Online

Browse by Schools and Department by Authors

Up a level
Export as [feed] RSS 2.0 [feed] RSS
Group by: Authors | Type | Date | No Grouping
Jump to: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z
Number of items at this level: 877.

A

AbdElDayem, A., White, M. ORCID: 0000-0002-7744-1993 & Sayma, A. I. ORCID: 0000-0003-2315-0004 (2021). Comparison of CFD predictions of supercritical carbon dioxide axial flow turbines using a number of turbulence models. In: Proceedings of the ASME Turbo Expo 2021: Turbomachinery Technical Conference and Exposition. . New York, USA: ASME. ISBN 9780791885048 doi: 10.1115/GT2021-58883

Abdan, S., Basha, N., Kovacevic, A. ORCID: 0000-0002-8732-2242 , Stosic, N., Birari, A. & Asati, N. (2019). Development and Design of Energy Efficient Oil-Flooded Screw Compressors. IOP Conference Series: Materials Science and Engineering, 604(1), ISSN 1757-8981 doi: 10.1088/1757-899X/604/1/012015

Abdan, S., Stosic, N., Kovacevic, A. ORCID: 0000-0002-8732-2242 , Smith, I. K. ORCID: 0000-0003-1524-9880 & Asati, N. (2019). Analysis of rolling bearing power loss models for twin screw oil injected compressor. IOP Conference Series: Materials Science and Engineering, 604(1), ISSN 1757-8981 doi: 10.1088/1757-899X/604/1/012013

Abdan, S., Stosic, N., Kovacevic, A. ORCID: 0000-0002-8732-2242 , Smith, I. K. & Deore, P. (2018). Identification and analysis of screw compressor mechanical losses. IOP Conference Series: Materials Science and Engineering, 425(1), 012015. doi: 10.1088/1757-899X/425/1/012015

Abokhedr, M., Vogiatzaki, K., Mitroglou, N. & Gavaises, E. (2015). A numerical simulation of single and two-phase flow in porous media: A pore sale observation of effective microscopic forces. Paper presented at the 6th BETA CAE International Conference, 10-6-2015 - 12-6-2015, MET Hotel, Thessaloniki, Greece.

Aboukhedr, M. (2019). Two-Phase Flow Simulation in Porous Media Geometries Reconstructed from micro CT Data : Application to Fluid Transport at Low Capillary Numbers. (Unpublished Doctoral thesis, City, University of London)

Aboukhedr, M., Georgoulas, A., Marengo, M. , Gavaises, M. ORCID: 0000-0003-0874-8534 & Vogiatzaki, K. (2018). Simulation of micro-flow dynamics at low capillary numbers using adaptive interface compression. Computers & Fluids, 165, pp. 13-32. doi: 10.1016/j.compfluid.2018.01.009

Ahmad, A.H., Naher, S. & Brabazon, D. (2014). Injection tests and effect on microstructure and properties of aluminium 7075 direct thermal method feedstock billets. Key Engineering Materials, 611, pp. 1637-1644. doi: 10.4028/www.scientific.net/KEM.611-612.1637

Ahmad, A.H., Naher, S. & Brabazon, D. (2014). The effect of direct thermal method, temperature and time on microstructure of a cast aluminum alloy. Materials and Manufacturing Processes, 29(2), pp. 134-139. doi: 10.1080/10426914.2013.822980

Al Zaili, J. ORCID: 0000-0003-4072-2107, Sayma, A. I. ORCID: 0000-0003-2315-0004 & Iaria, D. (2017). Reducing Levelised Cost of Energy and Environmental Impact of a Hybrid Microturbine-Based Concentrated Solar Power Plant. Proceedings of Shanghai 2017 Global Power and Propulsion Forum 30th October–1st November, 2017, ISSN 2504-4400

Alber, J., Manolesos, M. ORCID: 0000-0002-5506-6061, Weinzierl-Dlugosch, G. , Fischer, J., Schönmeier, A., Nayeri, C. N., Paschereit, C. O., Twele, J., Fortmann, J., Melani, P. F. & Bianchini, A. (2022). Experimental investigation of mini Gurney flaps in combination with vortex generators for improved wind turbine blade performance. Wind Energy Science, 7(3), pp. 943-965. doi: 10.5194/wes-7-943-2022

Alber, J., Soto-Valle, R., Manolesos, M. ORCID: 0000-0002-5506-6061 , Bartholomay, S., Navid Nayeri, C., Schönlau, M., Menzel, C., Oliver Paschereit, C., Twele, J. & Fortmann, J. (2020). Aerodynamic effects of Gurney flaps on the rotor blades of a research wind turbine. Wind Energy Science, 5(4), pp. 1645-1662. doi: 10.5194/wes-5-1645-2020

Alderman, J., Rolston, S., Gaster, M. & Atkin, C.J. (2016). A method of reducing the drag of transport wings. Paper presented at the 34th AIAA Applied Aerodynamics Conference, 13-17 June 2016, Washington D. C., USA. doi: https://arc.aiaa.org/doi/10.2514/6.2016-3115

Ali, M. I., Azam, M. S., Ranjan, V. & Banerjee, J. R. (2020). Free vibration of sigmoid functionally graded plates using the dynamic stiffness method and the Wittrick-Williams algorithm. Computers and Structures, 244, 106424. doi: 10.1016/j.compstruc.2020.106424

Almenara Ahijón, J., Santos, M. & Tomas-Rodriguez, M. ORCID: 0000-0001-9630-9579 (2019). Optimización heurística con criterios de error de control TMD en turbinas marinas flotantes. In: XL Jornadas de Automática. . Universidade da Coruña. Servizo de Publicacións. ISBN 9788497497169 doi: 10.17979/spudc.9788497497169.001

Alzahrani, F. M., Sanusi, Y. S., Vogiatzaki, K. , Ghoniem, A. F., Habib, M. A. & Mokheimer, E. M. A. (2014). Evaluation of the Accuracy of Selected Syngas Chemical Mechanisms. Journal of Energy Resources Technology, 137(4), 042201. doi: 10.1115/1.4029860

Amiryar, M. E. (2019). An assessment of flywheel storage for efficient provision of reliable power for residential premises in islanded operation. (Unpublished Doctoral thesis, City, University of London)

Amiryar, M. E. & Pullen, K. R. ORCID: 0000-0001-8501-9226 (2020). Analysis of Standby Losses and Charging Cycles in Flywheel Energy Storage Systems. Energies, 13(17), 4441.. doi: 10.3390/en13174441

Amiryar, M. E. & Pullen, K. R. ORCID: 0000-0001-8501-9226 (2019). Assessment of the Carbon and Cost Savings of a Combined Diesel Generator, Solar Photovoltaic, and Flywheel Energy Storage Islanded Grid System. Energies, 12(17), 3356.. doi: 10.3390/en12173356

Amiryar, M. E. & Pullen, K. R. (2017). A Review of Flywheel Energy Storage System Technologies and Their Applications. Applied Sciences, 7(3), p. 286. doi: 10.3390/app7030286

Amiryar, M. E., Pullen, K. R. ORCID: 0000-0001-8501-9226 & Nankoo, D. (2018). Development of a high-fidelity model for an electrically driven energy storage flywheel suitable for small scale residential applications. Applied Sciences, 8(3), 453.. doi: 10.3390/app8030453

An, D., Lotfian, S., Mesbah, D. , Ayre, D., Yoosefinejad, A., Thakur, V. K. & Yazdani Nezhad, H. ORCID: 0000-0003-0832-3579 (2019). Ultra-thin electrospun nanofibers for development of damage-tolerant composite laminates. Materials Today Chemistry, 14, p. 100202. doi: 10.1016/j.mtchem.2019.100202

An, D., Nourry, J., Gharavian, S. , Thakur, V. K., Aria, I., Cardenas, I., Khaleque, T. & Yazdani Nezhad, H. ORCID: 0000-0003-0832-3579 (2020). Strain self-sensing tailoring in functionalised carbon nanotubes/epoxy nanocomposites in response to electrical resistance change measurement. Paper presented at the 9th International Conference on Through-life Engineering Service, 3-4 Nov 2020, Cranfield, UK. doi: 10.13140/RG.2.2.10205.03041

Ananthapuvirajah, A. (2019). Free vibration and flutter behaviour of metallic and composite aircraft using DSM and developments of dynamic stiffness matrices for structural elements with applications. (Unpublished Doctoral thesis, City, University of London)

Andriotis, A., Gavaises, M. & Arcoumanis, C. (2008). Vortex flow and cavitation in diesel injector nozzles. Journal of Fluid Mechanics, 610, pp. 195-215. doi: 10.1017/S0022112008002668

Aqel, O., White, M. ORCID: 0000-0002-7744-1993, Khader, M. A. ORCID: 0000-0002-5771-2258 & Sayma, A. I. ORCID: 0000-0003-2315-0004 (2021). Sensitivity of transcritical cycle and turbine design to dopant fraction in CO2-based working fluids. Applied Thermal Engineering, 190, 116796. doi: 10.1016/j.applthermaleng.2021.116796

Aqel, O., White, M. ORCID: 0000-0002-7744-1993 & Sayma, A. I. ORCID: 0000-0003-2315-0004 (2021). Binary interaction uncertainty in the optimisation of a transcritical cycle: Consequences on cycle and turbine design. Paper presented at the 4th European sCO2 Conference for Energy Systems, 23-24 Mar 2021, Online. doi: 10.17185/duepublico/73959

Aqida, S.N, Brabazon, D. & Naher, S. (2012). An investigation of phase transformation and crystallinity in laser surface modified H13 steel. Applied Physics A: Materials Science & Processing, 110(3), pp. 673-678. doi: 10.1007/s00339-012-7149-2

Aqida, S.N., Brabazon, D. & Naher, S. (2012). Atomic diffusion in laser surface modified AISI H13 steel. Applied Physics A: Materials Science & Processing, 112(1), pp. 139-142. doi: 10.1007/s00339-012-7214-x

Aqida, S.N., Calosso, F., Brabazon, D. , Naher, S. & Rosso, M. (2010). Thermal fatigue properties of laser treated steels. International Journal of Material Forming, 3(S1), pp. 797-800. doi: 10.1007/s12289-010-0890-1

Arafat, M., Dinan, B., Haseeb, A. , Akbar, S., Rahman, B. M., Rozali, S. & Naher, S. (2021). Growth of 1D TiO2nanostructures on Ti substrates incorporated with residual stress through humid oxidation and their characterizations. Nanotechnology, 32(47), 475607. doi: 10.1088/1361-6528/ac1d77

Arcoumanis, C., Bae, C., Crookes, R. & Kinoshita, E. (2008). The potential of di-methyl ether (DME) as an alternative fuel for compression-ignition engines: A review. Fuel, 87(7), pp. 1014-1030. doi: 10.1016/j.fuel.2007.06.007

Arjeneh, M., Kovacevic, A., Manolis, M. & Stosic, N. (2015). Numerical and Experimental Investigation of Pressure Losses at Suction of a Twin Screw Compressor. IOP Conference Series: Materials Science and Engineering, 90(1), 012006. doi: 10.1088/1757-899X/90/1/012006

Arjeneh, M., Kovacevic, A. ORCID: 0000-0002-8732-2242, Stosic, N. & Gavaises, M. ORCID: 0000-0003-0874-8534 (2014). Study of Multiphase Flow at the Suction of Screw Compressor. Paper presented at the 22nd International Compressor Engineering Conference at Purdue 2014, 14 - 17 July 2014, West Lafayette, Indiana.

Arjeneh, M., Pullen, K. R. & Etemad, S. (2013). Experimental study of radial low specific speed turbocompressor running in reverse as turboexpander. Paper presented at the 8th International Conference on Compressors and their Systems, 09-09-2013 - 10-09-2013, City University London, UK.

Armakolas, I. (2018). Cavitation erosion fracture mechanisms and their detection in ship rudders. (Unpublished Doctoral thesis, City, University of London)

Arora, H., Mitchell, R. L., Johnston, R. , Manolesos, M. ORCID: 0000-0002-5506-6061, Howells, D., Sherwood, J. M., Bodey, A. J. & Wanelik, K. (2021). Correlating Local Volumetric Tissue Strains with Global Lung Mechanics Measurements. Materials (Basel), 14(2), 439. doi: 10.3390/ma14020439

Arthur, M.T. & Atkin, C.J. Transition modelling for viscous flow prediction.. Paper presented at the 36th AIAA Fluid Dynamics Conference and Exhibit, 5-8 June 2006, San Francisco, California.

Atkin, C. J. & Gowree, E. R. (2012). Recent Developlments to the viscous Garabedian and Korn method. Paper presented at the 28th Congress of the International Council of the Aeronautical Sciences, 23-28 Sep 2012, Brisbane, Australia.

Atkin, C. J. & Gowree, E. R. (2016). Staggered Three-dimensional Cavities as a Possible Method for Skin Friction Drag Reduction. In: Proceedings of the 30th International Council of the Aeronautical Sciences. . Bonn, Austria: The International Council of the Aeronautical Sciences.

Atkin, C.J. (2014). Convergence of calculated transition loci during computational analysis of transonic aerofoils and infinite swept wings. Paper presented at the 29th Congress of the International Council of the Aeronautical Sciences, ICAS 2014, 7-12 Sep 2014, St Petersburg, Russia.

Atkin, C.J. (2001). New aerodynamic approaches to suction system design. Notes on Numerical Fluid Mechanics, 76(3), pp. 55-63. doi: 10.1007/978-3-540-45359-8_7

Atkin, C.J. (2004). Performance trade-off studies for a retrofit Hybrid Laminar Flow Control system. Paper presented at the 2nd AIAA Flow Control Conference, 26 June - 1 July, Portland, Oregon.

Atkin, C.J. Predicting the mission performance of a retrofit Hybrid Laminar Flow Control system. Paper presented at the Aerospace Aerodynamics Research Conference, 2002.

Atkin, C.J. & Backer Dirks, T. (2015). Systems driven HLFC design. Paper presented at the 50th 3AF International Conference on Applied Aerodynamics, 30 Mar - 01 Apr 2015, Toulouse, France.

Atkin, C.J. & Schrauf, G. (2000). Progress in linear stability methods for design applications. Paper presented at the European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2000), 11-14 Sep 2000, Barcelona, Spain.

Axtmann, G., Hegner, F., Brücker, C. & Rist, U. (2016). Investigation and prediction of the bending of single and tandem pillars in a laminar cross flow. Journal of Fluids and Structures, 66, pp. 110-126. doi: 10.1016/j.jfluidstructs.2016.07.017

Axtmann, G., Rist, U., Hegner, F. & Bruecker, C. (2016). Numerical investigation of the bending of slenderwall-mounted cylinders in low reynolds number flow. Notes on Numerical Fluid Mechanics and Multidisciplinary Design, 132, pp. 191-201. doi: 10.1007/978-3-319-27279-5_17

B

Babazadehrokni, H. B. (2019). Thermo-physical property models for well-characterized hydrocarbon mixtures and fuels and effect of composition on fluid properties up to 4,500 bar. (Unpublished Doctoral thesis, City, University of London)

Backer Dirks, T. (2018). On the controllability of saturating crossflow vortices. (Unpublished Doctoral thesis, City, University of London)

Baker, A. & Yazdani Nezhad, H. ORCID: 0000-0003-0832-3579 (2021). Adhesively bonded repairs to highly loaded structure. In: Adams, Robert (Ed.), Adhesive Bonding. (pp. 437-497). Woodhead Publishing. doi: 10.1016/B978-0-12-819954-1.00022-8

Balatti, D., Haddad Khodaparast, H., Friswell, M. I. , Manolesos, M. ORCID: 0000-0002-5506-6061 & Amoozgar, M. (2021). The effect of folding wingtips on the worst-case gust loads of a simplified aircraft model. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, doi: 10.1177/09544100211010915

Balatti, D., Haddad Khodaparast, H., Friswell, M. I. , Manolesos, M. ORCID: 0000-0002-5506-6061 & Castrichini, A. (2021). Aircraft turbulence and gust identification using simulated in-flight data. Aerospace Science and Technology, 115, 106805. doi: 10.1016/j.ast.2021.106805

Baldacchino, D., Manolesos, M. ORCID: 0000-0002-5506-6061, Ferreira, C. , González Salcedo, A., Aparicio, M., Chaviaropoulos, T., Diakakis, K., Florentie, L., García, N. R., Papadakis, G., Sørensen, N. N., Timmer, N., Troldborg, N., Voutsinas, S. G. & van Zuijlen, A. (2016). Experimental benchmark and code validation for airfoils equipped with passive vortex generators. Journal of Physics: Conference Series, 753(2), 022002. doi: 10.1088/1742-6596/753/2/022002

Banerjee, J. R. (2015). Advances in structural dynamics, aeroelasticity and material science. (Unpublished Doctoral thesis, City University London)

Banerjee, J. R. (2019). Dewey Hodges’s Research in Structural Dynamics, Aeroelasticity, and Composites: A Personal Perspective. AIAA Journal, doi: 10.2514/1.j057495

Banerjee, J. R. (2021). Frequency dependent mass and stiffness matrices of bar and beam elements and their equivalency with the dynamic stiffness matrix. Computers and Structures, 254, 106616. doi: 10.1016/j.compstruc.2021.106616

Banerjee, J. R. (2016). Modal analysis of sailplane and transport aircraft wings using the dynamic stiffness method. Journal of Physics: Conference Series, 721, 012005. doi: 10.1088/1742-6596/721/1/012005

Banerjee, J. R. (2019). Review of the dynamic stiffness method for free-vibration analysis of beams. Transportation Safety and Environment, 1(2), pp. 106-116. doi: 10.1093/tse/tdz005

Banerjee, J. R. & Ananthapuvirajah, A. (2019). Commentary on, "Discussion on 'Free vibration of functionally graded beams and frameworks using the dynamic stiffness method' by Banerjee et al., Journal of Sound and Vibration 442 (2018) 34-47.". Journal of Sound and Vibration, 466, 114986. doi: 10.1016/j.jsv.2019.114986

Banerjee, J. R. & Ananthapuvirajah, A. (2019). Coupled axial-bending dynamic stiffness matrix for beam elements. Computers and Structures, doi: 10.1016/j.compstruc.2019.01.007

Banerjee, J. R. & Ananthapuvirajah, A. (2019). Free flexural vibration of tapered beams. Computers & Structures, 224, 106106.. doi: 10.1016/j.compstruc.2019.106106

Banerjee, J. R. & Ananthapuvirajah, A. (2018). Free vibration of functionally graded beams and frameworks using the dynamic stiffness method. Journal of Sound and Vibration, 422, pp. 34-47. doi: 10.1016/j.jsv.2018.02.010

Banerjee, J. R. & Ananthapuvirajah, A. (2018). An exact dynamic stiffness matrix for a beam incorporating Rayleigh–Love and Timoshenko theories. International Journal of Mechanical Sciences, 150, pp. 337-347. doi: 10.1016/j.ijmecsci.2018.10.012

Banerjee, J. R., Ananthapuvirajah, A., Liu, X. & Sun, C. (2020). Coupled axial-bending dynamic stiffness matrix and its applications for a Timoshenko beam with mass and elastic axes eccentricity. Thin-Walled Structures, 159, 107197. doi: 10.1016/j.tws.2020.107197

Banerjee, J. R., Ananthapuvirajah, A. & Papkov, S. O. (2020). Dynamic stiffness matrix of a conical bar using the Rayleigh-Love theory with applications. European Journal of Mechanics - A/Solids, 83, 104020. doi: 10.1016/j.euromechsol.2020.104020

Banerjee, J. R. & Kennedy, D. (2014). Dynamic stiffness method for inplane free vibration of rotating beams including Coriolis effects. Journal of Sound and Vibration, 333(26), pp. 7299-7312. doi: 10.1016/j.jsv.2014.08.019

Banerjee, J. R., Liu, X. & Kassem, H. I. (2014). Aeroelastic stability analysis of high aspect ratio aircraft wings. Journal of Applied Nonlinear Dynamics, 3(4), pp. 413-422. doi: 10.5890/JAND.2011.12.001

Banerjee, J. R., Papkov, S.O., Liu, X. & Kennedy, D. (2015). Dynamic stiffness matrix of a rectangular plate for the general case. JOURNAL OF SOUND AND VIBRATION, 342, doi: 10.1016/j.jsv.2014.12.031

Banks, S. P. & Tomas-Rodriguez, M. (2008). From local to global control. 47th IEEE Conference on Decision and Control, 2008. CDC 2008, pp. 4426-4430. doi: 10.1109/CDC.2008.4739231

Barambones, O., Irigoyen, E. & Tomas-Rodriguez, M. (2015). Introduction to the special section "Techniques of stability of fuzzy control systems". Revista Iberoamericana de Automática e Informática Industrial RIAI, 12(4), pp. 432-433. doi: 10.1016/j.riai.2015.09.003

Barrie, M., Qaban, A. ORCID: 0000-0003-2982-8429 & Naher, S. ORCID: 0000-0003-2047-5807 (2020). The influence of Widmanstätten ferrite, martensite and grain boundary carbides on the strength and impact behaviour of high Al (0.2%) and Nb containing hot rolled steels. Materials and design, 109, 108601.. doi: 10.1016/j.matdes.2020.108601

Basha, N., Kovacevic, A. ORCID: 0000-0002-8732-2242 & Rane, S (2019). Analysis of oil-injected twin-screw compressor with multiphase flow models. Designs, 3(4), 54.. doi: 10.3390/designs3040054

Basha, N., Kovacevic, A. ORCID: 0000-0002-8732-2242 & Rane, S. (2021). Numerical investigation of oil injection in screw compressors. Applied Thermal Engineering, 193, 116959. doi: 10.1016/j.applthermaleng.2021.116959

Basha, N., Kovacevic, A. ORCID: 0000-0002-8732-2242 & Rane, S. (2019). User defined nodal displacement of numerical mesh for analysis of screw machines in FLUENT. IOP Conference Series: Materials Science and Engineering, 604(1), doi: 10.1088/1757-899X/604/1/012012

Basha, N., Kovacevic, A. ORCID: 0000-0002-8732-2242, Stosic, N. & Smith, I. K. (2018). Effect of oil-injection on twin screw compressor performance. IOP Conference Series: Materials Science and Engineering, 425(1), 012009.. doi: 10.1088/1757-899X/425/1/012009

Bauer, K. & Bruecker, C. (2014). Behavior of oscillatory tube flow at liquid-gas interfaces. Physics of Fluids, 26(7), 072106.. doi: 10.1063/1.4890717

Bekhradinasab, A., Al-Zaili, J. ORCID: 0000-0003-4072-2107 & Vakilipour, S. (2021). Large eddy simulation of separated flow to investigate heat transfer characteristics in an asymmetric diffuser subjected to constant wall heat flux. International Communications in Heat and Mass Transfer, 128, 105634. doi: 10.1016/j.icheatmasstransfer.2021.105634

Bergeles, G., Koukouvinis, P., Gavaises, M. , Li, J. & Wang, L. (2015). An Erosion Aggressiveness Index (EAI) Based on Pressure Load Estimation Due to Bubble Collapse in Cavitating Flows Within the RANS Solvers. SAE International Journal of Engines, 8(5), pp. 2276-2284. doi: 10.4271/2015-24-2465

Bhanushali, R., Ayre, D. & Yazdani Nezhad, H. ORCID: 0000-0003-0832-3579 (2017). Tensile Response of Adhesively Bonded Composite-to-composite Single-lap Joints in the Presence of Bond Deficiency. Procedia CIRP, 59, pp. 139-143. doi: 10.1016/j.procir.2016.09.021

Bianchi, G., Kovacevic, A. & Cipollone, R. (2017). Deforming grid generation for numerical simulations of fluid dynamics in sliding vane rotary machines. Advances in Engineering Software, 112, pp. 180-191. doi: 10.1016/j.advengsoft.2017.05.010

Bianchi, G., Kovacevic, A., Cipollone, R. , Murgia, S. & Contaldi, G. (2016). Development of a general numerical methodology for CFD analyses in sliding vane machines and application on a mid-size oil injected air compressor. Paper presented at the 23rd International Compressor Engineering Conference, 11-14 Jul 2016, Indiana, USA.

Bianchi, G., Kovacevic, A., Cipollone, R. , Murgia, S. & Contaldi, G. (2017). Grid generation methodology and CFD simulations in sliding vane compressors and expanders. IOP Conference Series: Materials Science and Engineering, 232(012053), doi: 10.1088/1757-899X/232/1/012053

Bianchi, G., Rane, S., Fatigati, F. , Cipollone, R. & Kovacevic, A. ORCID: 0000-0002-8732-2242 (2019). Numerical CFD simulations and indicated pressure measurements on a sliding vane expander for heat to power conversion applications. Designs, 3(3), 31.. doi: 10.3390/designs3030031

Blonde, R., Jimenez-Melero, E., Ponnusami, S. A. , Zhao, L., Schell, N., Bruck, E., van der Zwaag, S. & van Dijk, N. (2014). Position-dependent shear-induced austenite-martensite transformation in double-notched TRIP and dual-phase steel samples. Journal Of Applied Crystallography, 47, pp. 956-964. doi: 10.1107/S1600576714006712

Bohari, B. & Sayma, A. I. (2010). CFD analysis of effects of damage due to bird strike on fan performance. Paper presented at the ASME Turbo Expo 2010: Power for Land, Sea, and Air, 14-06-2010 - 18-06-2010, Glasgow, UK. doi: 10.1115/GT2010-22365

Boscolo, M. & Banerjee, J. R. (2012). Dynamic stiffness formulation for composite Mindlin plates for exact modal analysis of structures. Part I: Theory. Computers & Structures, 96-97, pp. 61-73. doi: 10.1016/j.compstruc.2012.01.002

Boscolo, M. & Banerjee, J. R. (2012). Dynamic stiffness formulation for composite Mindlin plates for exact modal analysis of structures. Part II: Results and applications. Computers & Structures, 96-97, pp. 74-83. doi: 10.1016/j.compstruc.2012.01.003

Boscolo, M. & Banerjee, J. R. (2014). Layer-wise dynamic stiffness solution for free vibration analysis of laminated composite plates. Journal of Sound and Vibration, 333(1), pp. 200-227. doi: 10.1016/j.jsv.2013.08.031

Bottemanne, M. & Atkin, C.J. (2018). Tool for sizing suction pumps for hybrid laminar flow control concepts. International Journal of Mechanical Engineering and Robotics Research, 7(1), pp. 1-8. doi: 10.18178/ijmerr.7.1.1-8

Bregar, T., An, D., Gharavian, S. , Burda, M., Durazo-Cardenas, I., Thakur, V. K., Ayre, D., Słoma, M., Hardiman, M., McCarthy, C. T. & Yazdani Nezhad, H. ORCID: 0000-0003-0832-3579 (2020). Carbon nanotube embedded adhesives for real-time monitoring of adhesion failure in high performance adhesively bonded joints. Scientific Reports, 10, 16833. doi: 10.1038/s41598-020-74076-y

Brooks, S. J. ORCID: 0000-0002-5712-7358 & Roy, R. ORCID: 0000-0001-5491-7437 (2021). Complexity of self-engineering systems across the life cycle-Biological and engineering systems. Procedia CIRP, 98, pp. 121-126. doi: 10.1016/j.procir.2021.01.016

Brooks, S. J. ORCID: 0000-0002-5712-7358 & Roy, R. ORCID: 0000-0001-5491-7437 (2022). Design and complexity evaluation of a self-cleaning heat exchanger. International Journal of Heat and Mass Transfer, 191, 122725. doi: 10.1016/j.ijheatmasstransfer.2022.122725

Brooks, S. J. ORCID: 0000-0002-5712-7358 & Roy, R. ORCID: 0000-0001-5491-7437 (2021). An overview of self-engineering systems. Journal of Engineering Design, 32(8), pp. 397-447. doi: 10.1080/09544828.2021.1914323

Brooks, S. J. ORCID: 0000-0002-5712-7358, Yasin, A., Alatishe, K. & Roy, R. ORCID: 0000-0001-5491-7437 (2021). Design and Implementation of a Self-Cleaning Heat Exchanger Using a Digital Twin. Paper presented at the 10th International Through-Life Engineering Services Conference (Tesconf2021), 16-18 Nov 2021, Online. doi: 10.2139/ssrn.3944684

Bruecker, C. (2016). Measurement of near-wall 3D flow velocity from wave-guiding micro-pillars. Optics Express, 24(19), pp. 21407-21414. doi: 10.1364/OE.24.021407

Bruecker, C. ORCID: 0000-0001-5834-3020, Hess, D. & Watz, B. (2018). Volumetric Calibration Refinement using masked back projection and image correlation superposition. Paper presented at the 19th International Symposium on Applications of Laser and Imaging Techniques to Fluid Mechanics, 16-19 Jul 2018, Lisbon, Portugal.

Bruecker, C., Kirmse, C. & Triep, M. (2016). Feedback of the Glottal Jet Flow with Supraglottal Wall Oscillations. Acta Acustica united with Acustica, 102(2), pp. 240-243. doi: 10.3813/AAA.918940

Bruecker, C. ORCID: 0000-0001-5834-3020 & Li, Q. (2020). Possible Early Generation of Physiological Helical Flow Could Benefit the Triflo Trileaflet Heart Valve Prosthesis Compared to Bileaflet Valves. Bioengineering, 7(4), 158.. doi: 10.3390/bioengineering7040158

Bruecker, C. & Mikulich, V. (2017). Sensing of minute airflow motions near walls using pappus-type nature-inspired sensors. PLoS One, 12(6), e0179253. doi: 10.1371/journal.pone.0179253

Bruecker, C. ORCID: 0000-0001-5834-3020 & Puits, R. D. The multi-scale nature of Wall shear stress fluctuations in turbulent Rayleigh-Benard convection. City, University of London.

Bruecker, C. ORCID: 0000-0001-5834-3020, Wagner, R. & Koehler, M. (2016). Measurements of wall-shear stress fields on the piston crown in an IC engine flow using fluorescent labelled micro-pillar imaging. Paper presented at the 18th International Symposium on Applications of Laser Techniques to Fluid Mechanics, 4-7 Jul 2016, Lisbon, Portugal.

Brunhart, M. (2020). Cavitation and the application of methods for erosion prediction in high pressure fuel injection systems. (Unpublished Doctoral thesis, City, University of London)

Brunhart, M., Koukouvinis, F. ORCID: 0000-0002-3945-3707, Gavaises, M. ORCID: 0000-0003-0874-8534 , Soteriou, C. & Daveau, C. (2018). Initial findings of an investigation on the removal of the cavitation erosion risk in a prototype control orifice inside a diesel injector. Paper presented at the The 10th International Symposium on Cavitation (CAV2018), 14-16 May 2018, Baltimore, USA.

Brunhart, M., Soteriou, C., Daveau, C. , Gavaises, E., Koukouvinis, P. & Winterbourn, M. (2018). Investigation on the removal of the cavitation erosion risk in a control orifice inside a prototype diesel injector. Paper presented at the Fuel Systems - Engines, 04 - 05 December 2019, London, UK.

Brunhart, M., Soteriou, C., Daveau, C. , Gavaises, M. ORCID: 0000-0003-0874-8534, Koukouvinis, P. ORCID: 0000-0002-3945-3707 & Winterbourn, M. (2019). Cavitation erosion risk indicators for a thin gap within a diesel fuel pump. Wear, doi: 10.1016/j.wear.2019.203024

Brunhart, M. ORCID: 0000-0002-2970-8091, Soteriou, C., Gavaises, M. ORCID: 0000-0003-0874-8534 , Karathanassis, I. K. ORCID: 0000-0001-9025-2866, Koukouvinis, F. ORCID: 0000-0002-3945-3707, Jahangir, S. & Poelma, C. (2020). Investigation of cavitation and vapor shedding mechanisms in a Venturi nozzle. Physics of Fluids, 32(8), 083306.. doi: 10.1063/5.0015487

Brücker, C., Schlegel, D. & Triep, M. (2016). Feather Vibration as a Stimulus for Sensing Incipient Separation in Falcon Diving Flight. Natural Resources, 07(07), pp. 411-422. doi: 10.4236/nr.2016.77036

Brücker, C. ORCID: 0000-0001-5834-3020, Schnakenberg, U., Rockenbach, A. & Mikulich, V. (2017). Effect of Cilia Orientation in Metachronal Transport of Microparticles. World Journal of Mechanics, 07(01), .73453. doi: 10.4236/wjm.2017.71001

Brücker, C. & Weidner, C. (2014). Influence of self-adaptive hairy flaps on the stall delay of an airfoil in ramp-up motion. Journal of Fluids and Structures, 47, pp. 31-40. doi: 10.1016/j.jfluidstructs.2014.02.014

Buckney, D., Kovacevic, A. & Stosic, N. (2016). Design and evaluation of rotor clearances for oil-injected screw compressors. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 231(1), pp. 26-37. doi: 10.1177/0954408916660342

Buckney, D., Kovacevic, A. & Stosic, N. (2013). Experimental validation of a geometry model for twin screw machines. In: 8th International Conference on Compressors and their Systems. (pp. 237-246). Cambridge: Woodhead Publishing.

Buckney, D., Kovacevic, A. & Stosic, N. (2015). Rotor clearance design and evaluation for an oil injected twin screw compressor. IOP Conference Series: Materials Science and Engineering, 90(1), 012003. doi: 10.1088/1757-899X/90/1/012003

Buhl, S., Gleiss, F., Köhler, M. , Hartmann, F., Messig, D., Bruecker, C. & Hasse, C. (2017). A combined numerical and experimental study of the 3D tumble structure and piston boundary layer development during the intake stroke of a gasoline engine. Flow, Turbulence and Combustion, 98, pp. 579-600. doi: 10.1007/s10494-016-9754-1

C

Carlton, J., Radosavlijevic, D. & Whitworth, S. (2009). Rudder-Propeller-Hull Interaction: The Results of Some Recent Research, In-Service Problems and their Solutions. Paper presented at the First International Symposium on Marine Propulsors smp’09,, June 2009, Trondheim, Norway.

Carlton, J., Smart, R. & Jenkins, V. (2010). The Nuclear Propulsion of Merchant Ships: Aspects of Risk and Regulation. Paper presented at the Lloyd’s Register Technology Days 2010, Feb 2010, London, UK.

Carlton, J., Smart, R. & Jenkins, V. (2011). The nuclear propulsion of merchant ships: Aspects of engineering, science and technology. Journal of Marine Engineering and Technology, 10(2), pp. 47-59. doi: 10.1080/20464177.2011.11020247

Casari, N., Fadiga, E., Pinelli, M. , Suman, A., Kovacevic, A. ORCID: 0000-0002-8732-2242, Rane, S. & Ziviani, D. (2019). Numerical investigation of oil injection in a Roots blower operated as expander. IOP Conference Series: Materials Science and Engineering, 604(1), 012075.. doi: 10.1088/1757-899X/604/1/012075

Casari, N., Pinelli, M., Suman, A. , Kovacevic, A. ORCID: 0000-0002-8732-2242, Rane, S. & Ziviani, D. (2018). Full 3D numerical analysis of a twin screw compressor by employing open-source software. IOP Conference Series: Materials Science and Engineering, 425(1), 012017.. doi: 10.1088/1757-899X/425/1/012017

Castillo-Rivera, S. & Tomas-Rodriguez, M. ORCID: 0000-0001-9630-9579 (2021). Description of a Dynamical Framework to Analyse the Helicopter Tail Rotor. Dynamics, 1(2), pp. 171-180. doi: 10.3390/dynamics1020010

Castillo-Rivera, S. & Tomas-Rodriguez, M. (2017). Helicopter flap/lag energy exchange study. Nonlinear Dynamics, 88(4), pp. 2933-2946. doi: 10.1007/s11071-017-3422-4

Castillo-Rivera, S. & Tomas-Rodriguez, M. (2018). Helicopter modelling and study of the accelerated rotor. Advances in Engineering Software, 115, pp. 52-65. doi: 10.1016/j.advengsoft.2017.08.012

Castillo-Rivera, S. & Tomas-Rodriguez, M. (2016). Helicopter nonlinear aerodynamics modelling using VehicleSim. Advances in Engineering Software, 100, pp. 252-265. doi: 10.1016/j.advengsoft.2016.08.001

Cattell, R. (2019). An experimental investigation in to a highly forward swept, low specific speed turbocompressor. (Unpublished Doctoral thesis, City, University of London)

Chassaing, J. C., Sayma, A. I. & Imregun, M. (2008). A combined time and frequency domain approach for acoustic resonance prediction. Journal of Sound and Vibration, 311(3-5), pp. 1100-1113. doi: 10.1016/j.jsv.2007.10.006

Chen, B., Riley, P. H., Abakr, Y. A. , Pullen, K. R., Hann, D. B. & Johnson, C. (2013). Design and development of a low-cost, electricity-generating cooking Score-Stove™. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 227(7), pp. 803-813. doi: 10.1177/0957650913498733

Chen, Y., Kaparias, I., Bell, M. G. H. & Bogenberger, K. (2005). Reliable autonomous route guidance by a constrained A* search considering intersection delays. In: Van Zuylen, H. (Ed.), The Reliability of Traveling and the Robustness of Transport Systems. (pp. 69-92). Netherlands: TRAIL Research School.

Chikarakara, E., Naher, S. & Brabazon, D. (2012). High speed laser surface modification of Ti-6Al-4V. Surface and Coatings Technology, 206(14), pp. 3223-3229. doi: 10.1016/j.surfcoat.2012.01.010

Chukanova, E., Stosic, N. & Kovacevic, A. ORCID: 0000-0002-8732-2242 (2016). Modelling and Experimental Investigation of Compressor Plant Operation Under Unsteady Conditions. In: ASME 2015 International Mechanical Engineering Congress and Exposition, Volume 4A: Dynamics, Vibration, and Control. . ASME. ISBN 978-0-7918-5739-7

Chukanova, E., Stosic, N. & Kovacevic, A. (2013). Numerical analysis of unsteady behaviour of a screw compressor plant system. In: 8th International Conference on Compressors and their Systems. (pp. 129-139). Cambridge: Woodhead Publishing.

Corlho, L., Placidi, M., Atkin, C.J. & Sun, Z. (2016). Experimental Investigation of a Handley Page Triple Slotted Aerofoil. Paper presented at the 2016 Applied Aerodynamics Conference: Evolution & Innovation Continues - The Next 150 Years of Concepts, Design and Operations, 19-21 July 2016, Bristol, UK.

Court, A. & Bruecker, C. (2022). Spanwise Lift and Gust Control via Arrays of Bio-inspired Individually Actuated Pneumatic Flaplets. Paper presented at the 56th 3AF International Conference on Applied Aerodynamics, 28-30 Mar 2022, Toulose, France.

Cristofaro, M., Edelbauer, W., Gavaises, M. ORCID: 0000-0003-0874-8534 & Koukouvinis, P. ORCID: 0000-0002-3945-3707 (2017). Numerical simulation of compressible cavitating two-phase flows with a pressure-based solver. Paper presented at the ILASS–Europe 2017, 28th Conference on Liquid Atomization and Spray Systems, 6-8 September 2017, Valencia, Spain. doi: 10.4995/ILASS2017.2017.4629

Cristofaro, M., Edelbauer, W., Koukouvinis, F. & Gavaises, M. ORCID: 0000-0003-0874-8534 (2018). Large Eddy Simulation of the internal injector flow during pilot injection. Paper presented at the The 10th International Symposium on Cavitation (CAV2018), 14-16 May 2018, Baltimore, USA.

Cristofaro, M., Edelbauer, W., Koukouvinis, P. ORCID: 0000-0002-3945-3707 & Gavaises, M. ORCID: 0000-0003-0874-8534 (2020). Influence of diesel fuel viscosity on cavitating throttle flow simulations at erosive operation conditions. ACS Omega, 5(13), pp. 7182-7192. doi: 10.1021/acsomega.9b03623

Cristofaro, M., Edelbauer, W., Koukouvinis, P. ORCID: 0000-0002-3945-3707 & Gavaises, M. ORCID: 0000-0003-0874-8534 (2019). A numerical study on the effect of cavitation erosion in a Diesel injector. Applied Mathematical Modelling, doi: 10.1016/j.apm.2019.09.002

Crowley, B. J. (2020). High and low frequency dominated boundary layer transition through widely spaced discrete suction perforations. (Unpublished Doctoral thesis, City, University of London)

Crowley, B.J. & Atkin, C.J. (2016). Investigation of the discrete effects of suction in large scale arrays for Laminar flow control. In: 34th AIAA Applied Aerodynamics Conference. . Reston, VA, United States: American Institute of Aeronautics and Astronautics. doi: 10.2514/6.2016-3117

Cui, H., Mahadik, Y., Hallett, S. R. , Partridge, I. K., Allegri, G., Ponnusami, S. A. & Petrinic, N. (2019). Coupon scale Z-pinned IM7/8552 delamination tests under dynamic loading. Composites Part A: Applied Science and Manufacturing, 125, 105565.. doi: 10.1016/j.compositesa.2019.105565

D

Daminabo, S., Goel, S., Grammatikos, S. , Yazdani Nezhad, H. ORCID: 0000-0003-0832-3579 & Thakur, V. K. (2020). Fused deposition modeling-based additive manufacturing (3D printing): techniques for polymer material systems. Materials Today Chemistry, 16, 100248.. doi: 10.1016/j.mtchem.2020.100248

Danieli, P., Lazzaretto, A., Al-Zaili, J. ORCID: 0000-0003-4072-2107 , Sayma, A. I., Masi, M. & Carraro, G. (2022). The potential of the natural gas grid to accommodate hydrogen as an energy vector in transition towards a fully renewable energy system. Applied Energy, 313, 118843. doi: 10.1016/j.apenergy.2022.118843

Dasari, B. L., Brabazon, D. & Naher, S. ORCID: 0000-0003-2047-5807 (2019). Prediction of Mechanical Properties of Graphene Oxide Reinforced Aluminum Composites. Metals, 9(10), p. 1077. doi: 10.3390/met9101077

Dasari, B. L., Morshed, M.M., Nouri, J. M. ORCID: 0000-0001-8610-3737 , Brabazon, D. & Naher, S. (2018). Mechanical properties of graphene oxide reinforced aluminium matrix composites. Composites Part B: Engineering, 145, pp. 136-144. doi: 10.1016/j.compositesb.2018.03.022

Dasari, B. L. & Naher, S. ORCID: 0000-0003-2047-5807 (2020). Graphene Materials for Batteries. In: Olabi, A-G. (Ed.), Reference Module in Materials Science and Materials Engineering. . Amsterdam, Netherlands: Elsevier. doi: 10.1016/B978-0-12-815732-9.00036-X

Dasari, B. L., Nouri, J. M., Brabazon, D. & Naher, S. (2017). Graphene and derivatives – Synthesis techniques, properties and their energy applications. Energy, 140(1), pp. 766-778. doi: 10.1016/j.energy.2017.08.048

Dasari, B. L., Nouri, J. M., Brabazon, D. & Naher, S. (2017). Parametric study for graphene reinforced aluminum matrix composites production using Box Behnken design. AIP Conference Proceedings, 1896(1), 130006.. doi: 10.1063/1.5008155

Dasari, BhagyaLakshmi (2019). Production and characterisation of graphene oxide reinforced aluminium matrix composites. (Unpublished Doctoral thesis, City, University of London)

De Bianchi, F., Ponnusami, S. A. ORCID: 0000-0002-2143-8971, Silvestroni, L. & Grande, A. M. (2021). Thermo-elastic properties in short fibre reinforced ultra-high temperature ceramic matrix composites: Characterisation and numerical assessment. Materials Today Communications, 29, 102754. doi: 10.1016/j.mtcomm.2021.102754

Deane, S., Avdelidis, N. P., Ibarra-Castanedo, C. , Maldague, X., Tsourdos, A., Williamson, A., Yazdani Nezhad, H. ORCID: 0000-0003-0832-3579 & Zhang, H. (2019). Autonomous Systems Imaging of Aerospace Structures. Paper presented at the 10th International Symposium on NDT in Aerospace, 24-26 Oct 2018, Dresden, Germany.

Deane, S., Avdelidis, N. P., Ibarra-Castanedo, C. , Yazdani Nezhad, H. ORCID: 0000-0003-0832-3579, Williamson, A., Zhang, H., Tzitzilonis, V., Maldague, X. P. V. & Tsourdos, A. (2019). Autonomous systems thermographic NDT of composite structures. Proceedings of SPIE 11004, Thermosense: Thermal Infrared Applications XLI, 11004, 110041.. doi: 10.1117/12.2517426

Deane, S., Avdelidis, N. P., Ibarra-Castanedo, C. , Zhang, H., Yazdani Nezhad, H. ORCID: 0000-0003-0832-3579, Williamson, A. A., Mackley, T., Davis, M. J., Maldague, X. & Tsourdos, A. (2019). Application of NDT thermographic imaging of aerospace structures. Infrared Physics & Technology, 97, doi: 10.1016/j.infrared.2019.02.002

Deane, S., Avdelidis, N. P., Ibarra-Castanedo, C. , Zhang, H., Yazdani Nezhad, H. ORCID: 0000-0003-0832-3579, Williamson, A. A., Mackley, T., Maldague, X., Tsourdos, A. & Nooralishahi, P. (2020). Comparison of Cooled and Uncooled IR Sensors by Means of Signal-to-Noise Ratio for NDT Diagnostics of Aerospace Grade Composites. Sensors, 20(12), 3381.. doi: 10.3390/s20123381

Dell’Amico, M., Hadjidimitriou, S. & Kaparias, I. (2014). A descriptive study on public transport user behaviour from Live Bus Arrivals. Paper presented at the 2nd Conference on Sustainable Urban Mobility, 05-05-2014 - 06-05-2014, Volos, Greece.

Dennis, R. & Pullen, K. R. (2013). Development of a wood-fired cooking stove to incorporate a thermo-acoustic engine-generator unit. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 227(7), pp. 740-751. doi: 10.1177/0957650913498735

Dennis, R. & Pullen, K. R. (2017). Vehicles for rural transport services in sub-Saharan Africa. Proceedings of the Institution of Civil Engineers - Transport, doi: 10.1680/jtran.15.00081

Dhand, A. & Pullen, K. R. (2016). Analysis of Dual Mode Continuously Variable Transmission for Flywheel Energy Storage Systems. SAE Technical Papers, .2016_01_1177. doi: 10.4271/2016-01-1177

Dhand, A. & Pullen, K. R. (2015). Analysis of continuously variable transmission for flywheel energy storage systems in vehicular application. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 229(2), pp. 273-290. doi: 10.1177/0954406214533096

Dhand, A. & Pullen, K. R. (2015). Optimal energy management for a flywheel-assisted battery electric vehicle. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 229(12), pp. 1672-1682. doi: 10.1177/0954407014567720

Dhand, A. & Pullen, K. R. (2013). Review of Flywheel based Internal Combustion Engine Hybrid Vehicles. International Journal of Automotive Technology, 14(5), pp. 797-804. doi: 10.1007/s12239-013-0088-x

Dhand, A. & Pullen, K. R. (2015). Review of battery electric vehicle propulsion systems incorporating flywheel energy storage. International Journal of Automotive Technology, 16(3), pp. 487-500. doi: 10.1007/s12239-015-0051-0

Dhand, A. & Pullen, K. R. (2013). Simulation based study of battery electric vehicle performance in real world cycles. International Journal of Electric and Hybrid Vehicles, 5(4), pp. 327-343. doi: 10.1504/IJEHV.2013.059372

Diego-Ayala, U., Martinez-Gonzalez, P., McGlashan, N. & Pullen, K. R. (2008). The mechanical hybrid vehicle: an investigation of a flywheel-based vehicular regenerative energy capture system. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 222(11), pp. 2087-2101. doi: 10.1243/09544070JAUTO677

Dionysios, S. (2020). Direct numerical simulation of secondary droplet breakup in fuel sprays. (Unpublished Doctoral thesis, City, University of London)

Dirks, T. B. & Atkin, C.J. ORCID: 0000-0003-2529-1978 (2019). A consolidated method for predicting laminar boundary layers on rotating axi-symmetric bodies. European Journal of Mechanics, B/Fluids, 75, pp. 271-278. doi: 10.1016/j.euromechflu.2018.10.013

Duncan, E. M., Charani, E., Clarkson, J. E. , Francis, J. ORCID: 0000-0001-5784-8895, Gillies, K., Grimshaw, J. M., Kern, W. V., Lorencatto, F., Marwick, C. A., McEwen, J., Moehler, R., Morris, A., Ramsay, C. R., Van Katwyk, S. R., Rzewuska, M., Skodvin, B., Smith, I. K. ORCID: 0000-0003-1524-9880, Suh, K. N. & Davey, P. (2020). A behavioural approach to specifying interventions: what insights can be gained for the reporting and implementation of interventions to reduce antibiotic use in hospitals?. Journal of Antimicrobial Chemotherapy, 75(5), pp. 1338-1346. doi: 10.1093/jac/dkaa001

di Mare, L., Imregun, M., Green, J. S. & Sayma, A. I. (2010). A numerical study of labyrinth seal flutter. Journal of Tribology, 132(2), pp. 1-7. doi: 10.1115/1.3204774

du Puits, R. & Bruecker, C. ORCID: 0000-0001-5834-3020 (2020). Fluctuations of the wall shear stress vector in a large-scale natural convection cell. AIP Advances, 10(7), 075105. doi: 10.1063/5.0006610

E

Eden, N., Kaparias, I., Tsakarestos, A. , Gal-Tzur, A., Schmitz, P., Hoadley, S., Harrich, M. & Hauptmann, S. (2013). Using Key Performance Indicators for multi-criteria traffic management strategic decisions. Paper presented at the 9th European Intelligent Transport Systems Congress, 04-06-2013 - 07-06-2013, Dublin, Ireland.

Eden, N., Tsakarestos, A., Kaparias, I. , Gal-Tzur, A., Schmitz, P., Hauptmann, S. & Hoadley, S. (2012). Using Key Performance Indicators for traffic management and Intelligent Transport Systems as a prediction tool. Paper presented at the 19th ITS World Congress, 22 - 26 October 2012, Vienna, Austria.

Elshalakani, M. & Bruecker, C. ORCID: 0000-0001-5834-3020 (2018). Spontaneous Synchronization of Beating Cilia: An Experimental Proof Using Vision-Based Control. Fluids, 3(2), 30.. doi: 10.3390/fluids3020030

Elshalakani, M. & Brücker, C. ORCID: 0000-0001-5834-3020 (2020). Simulation of self-coordination in a row of beating flexible flaplets for micro-swimmer applications: Model and experiment study. Journal of Fluids and Structures, 94, 102923.. doi: 10.1016/j.jfluidstructs.2020.102923

Elshalakani, M., Muthuramalingam, M. & Bruecker, C. ORCID: 0000-0001-5834-3020 (2020). A Deep-Learning Model for Underwater Position Sensing of a Wake's Source Using Artificial Seal Whiskers. Sensors, 20(12), 3522.. doi: 10.3390/s20123522

Elshalakani, M. O. M. E (2020). Investigation of biomimetic systems and their applications in robotic solutions in fluids: using deep learning and vision-based control. (Unpublished Doctoral thesis, City, University of London)

Estelles Martinez, S. & Tomas-Rodriguez, M. (2014). Seguimiento de trayectorias tridimensionales de un quadrotor mediante control PVA. Revista Iberoamericana de Automática e Informática Industrial, 11(1), pp. 54-67. doi: 10.1016/j.riai.2013.11.004

Evangelou, S. A., Limebeer, D. J. N. & Tomas-Rodriguez, M. (2008). Influence of Road Camber on Motorcycle Stability. Journal Of Applied Mechanics, 75(6), 061020.. doi: 10.1115/1.2937140

Evangelou, S. A., Limebeer, D. J. N. & Tomas-Rodriguez, M. (2013). Suppression of Burst Oscillations in Racing Motorcycles. Journal Of Applied Mechanics, 80(1), 011003. doi: 10.1115/1.4006491

Evangelou, S. A., Limebeer, D. J. N. & Tomas-Rodriguez, M. (2013). Suppression of Burst Oscillations in Racing Motorcycles. Paper presented at the 49th IEEE Conference on Decision and Control, 15-12-2010 - 17-12-2010, Atlanta, USA. doi: 10.1115/1.4006491

F

Faisal, N. H., Ahmed, R., Sellami, N. , Prathuru, A., Njuguna, J., Venturi, F., Hussain, T., Yazdani Nezhad, H. ORCID: 0000-0003-0832-3579, Katiyar, N. K., Goel, S., Upadhyaya, H., Joshi, S., Muhammad-Sukki, F., Prabhu, R., Mallick, T., Whittow, W. & Kamnis, S. (2022). Thermal spray coatings for electromagnetic wave absorption and interference shielding: a review and future challenges. Advanced Engineering Materials, doi: 10.1002/adem.202200171

Fatmi, Zeeshan (2018). Optical and chemical characterisation of the effects of high-pressure hydrodynamic cavitation on diesel fuel. (Unpublished Doctoral thesis, City, University of London)

Favier, J., Li, C., Kamps, L. , Revell, A., O Connor, J. & Brücker, C. (2017). The PELskin project—part I: fluid–structure interaction for a row of flexible flaps: a reference study in oscillating channel flow. Meccanica, 52(8), pp. 1767-1780. doi: 10.1007/s11012-016-0521-0

Favier, J., Pinelli, A. & Piomelli, U. (2011). Control of the separated flow around an airfoil using a wavy leading edge inspired by humpback whale flippers. Comptes Rendus Mecanique, 340(1), pp. 107-114. doi: 10.1016/j.crme.2011.11.004

Favier, J., Revell, A. & Pinelli, A. (2016). Fluid Structure Interaction of Multiple Flapping Filaments Using Lattice Boltzmann and Immersed Boundary Methods. Advances in fluid structure interaction, 133, pp. 167-178. doi: 10.1007/978-3-319-27386-0_10

Favier, J., Revell, A. & Pinelli, A. (2014). A Lattice Boltzmann-Immersed Boundary method to simulate the fluid interaction with moving and slender flexible objects. Journal of Computational Physics, 261, pp. 145-161. doi: 10.1016/j.jcp.2013.12.052

Favier, J., Revell, A. & Pinelli, A. (2015). Numerical study of flapping filaments in a uniform fluid flow. Journal of Fluids and Structures, 53, pp. 26-35. doi: 10.1016/j.jfluidstructs.2014.11.010

Fazzolari, F. A., Banerjee, J. R. & Boscolo, M. (2013). Buckling of composite plate assemblies using higher order shear deformation theory-An exact method of solution. Thin-Walled Structures, 71, pp. 18-34. doi: 10.1016/j.tws.2013.04.017

Fazzolari, F. A., Boscolo, M. & Banerjee, J. R. (2013). An exact dynamic stiffness element using a higher order shear deformation theory for free vibration analysis of composite plate assemblies. Composite Structures, 96, pp. 262-278. doi: 10.1016/j.compstruct.2012.08.033

Fostiropoulos, S., Strotos, G., Nikolopoulos, N. & Gavaises, M. ORCID: 0000-0003-0874-8534 (2020). Numerical investigation of heavy fuel oil droplet breakup enhancement with water emulsions. Fuel, 278, 118381.. doi: 10.1016/j.fuel.2020.118381

Fostiropoulos, S., Strotos, G., Nikolopoulos, N. & Gavaises, M. ORCID: 0000-0003-0874-8534 (2020). A simple model for breakup time prediction of Water-Heavy Fuel Oil emulsion droplets. International Journal of Heat and Mass Transfer, 164, 120581.. doi: 10.1016/j.ijheatmasstransfer.2020.120581

Fostiropoulos, S. R. (2020). Heat transfer and breakup of emulsified fuel droplets. (Unpublished Doctoral thesis, City, University of London)

Fumarola, I. (2019). Effect of Freestream Turbulence on the Boundary Layer on a Swept Leading Edge. (Unpublished Doctoral thesis, City, University of London)

Fumarola, I., Gaster, M. & Atkin, C.J. (2016). Experimental investigation of the vorticity amplification on a swept wing with a blunt leading edge. Paper presented at the 52nd 3AF International Conference on Applied Aerodynamics, 27-29 Mar 2017, Lyon, France.

G

Gan, T., Wu, Y., Sun, Z. ORCID: 0000-0002-3862-7939 , Jin, D., Song, H. & Jia, M. (2018). Shock wave boundary layer interaction controlled by surface arc plasma actuators. Physics of Fluids, 30(5), 055107.. doi: 10.1063/1.5013166

Gavaises, E., Marengo, M., Antonini, C. , Nikolopoulos, N. & Malgarinos, I. (2013). Numerical investigation of droplet impingement onto hydrophobic and super-hydrophobic solid surfaces. The effect of Weber number and wettability. Paper presented at the ILASS 2013 - 25th Annual Conference on Liquid Atomization and Spray Systems, 1-4 Sept 2013, Chania, Crete.

Gavaises, E., Mirshahi, M., Nouri, J. M. & Yan, Y. (2013). Link between in-nozzle cavitation and jet spray in a gasoline multi-hole injector. Paper presented at the ILASS 2013 - 25th Annual Conference on Liquid Atomization and Spray Systems, 1-4 Sept 2013, Chania, Crete.

Gavaises, E., Rewse-Davies, Z., Nouri, J. M. & Arcoumanis, C. (2013). Near-Nozzle Instabilities in Gasoline Direct Injection Sprays. Paper presented at the ILASS 2013 - 25th Annual Conference on Liquid Atomization and Spray Systems, 1-4 Sept 2013, Chania, Crete.

Gavaises, E., Theodorakakos, A. & Mitroglou, N. (2012). Simulation of heating effects caused by extreme fuel pressurisation in cavitating flows through Diesel fuel injectors. Paper presented at the 8th International Symposium on Cavitation, 13 - 16 Aug 2012, Singapore.

Gavaises, M. (2008). Flow in valve covered orifice nozzles with cylindrical and tapered holes and link to cavitation erosion and engine exhaust emissions. International Journal of Engine Research, 9(6), doi: 10.1243/14680874JER01708

Gavaises, M., Andriotis, A., Papoulias, D. , Mitroglou, N. & Theodorakakos, A. (2009). Characterization of string cavitation in large-scale Diesel nozzles with tapered holes. Physics of Fluids, 21(5), 052107. doi: 10.1063/1.3140940

Gavaises, M. ORCID: 0000-0003-0874-8534, Murali-Girija, M., Rodriguez, C. , Koukouvinis, P. ORCID: 0000-0002-3945-3707, Gold, M. & Pearson, R. (2021). Numerical simulation of fuel dribbling and nozzle wall wetting. International Journal of Engine Research, doi: 10.1177/1468087420985189

Gavaises, M., Villa, F., Koukouvinis, P. , Marengo, M. & Franc, J-P. (2015). Visualisation and les simulation of cavitation cloud formation and collapse in an axisymmetric geometry. International Journal of Multiphase Flow, 68, pp. 14-26. doi: 10.1016/j.ijmultiphaseflow.2014.09.008

Georgoulas, A., Koukouvinis, P., Gavaises, M. & Marengo, M. (2015). Numerical investigation of quasi-static bubble growth and detachment from submerged orifices in isothermal liquid pools: The effect of varying fluid properties and gravity levels. International Journal of Multiphase Flow, 74, pp. 59-78. doi: 10.1016/j.ijmultiphaseflow.2015.04.008

Geyer, T. F., Kamps, L., Sarradj, E. & Brücker, C. ORCID: 0000-0001-5834-3020 (2019). Vortex Shedding and Modal Behavior of a Circular Cylinder Equipped with Flexible Flaps. Acta Acustica united with Acustica, 105(1), pp. 210-219. doi: 10.3813/aaa.919301

Ghavami, M. ORCID: 0000-0002-0772-7726, Al-Zaili, J. ORCID: 0000-0003-4072-2107 & Sayma, A. I. ORCID: 0000-0003-2315-0004 (2022). A methodology for techno-economic and operation strategy optimisation of micro gas turbine-based solar powered dish-engine systems. Energy, 251, 123873. doi: 10.1016/j.energy.2022.123873

Giannadakis, E., Gavaises, M. & Arcoumanis, C. (2008). Modelling of cavitation in diesel injector nozzles. Journal of Fluid Mechanics, 616, pp. 153-193. doi: 10.1017/S0022112008003777

Glick, R., Muthuramalingam, M. & Brücker, C. ORCID: 0000-0001-5834-3020 (2021). Fluid-Structure Interaction of Flexible Whisker-Type Beams and Its Implication for Flow Sensing by Pair-Wise Correlation. Fluid Structure Interaction: Methods and Applications, 6(3), 102.. doi: 10.3390/fluids6030102

Godinez, F. A., Mayen-Mondragon, R., Guzman, J. E. V. , Chavez, O., Gavaises, M. ORCID: 0000-0003-0874-8534 & Montoya, R. (2020). Bioinspired snapping-claw apparatus to study hydrodynamic cavitation effects on the corrosion of metallic samples. Review of Scientific Instruments, 91, 066101.. doi: 10.1063/5.0007069

Gold, M., Pearson, R., Turner, J. , Sykes, D., Stetsyuk, V., De Sercey, G., Crua, C., Koukouvinis, F. ORCID: 0000-0002-3945-3707 & Gavaises, M. ORCID: 0000-0003-0874-8534 (2019). Simulation and Measurement of Transient Fluid Phenomena within Diesel Injection. SAE Technical Papers, 2019, 0066.. doi: 10.4271/2019-01-0066

Gomez Santos, E. (2020). Simulation and numerical modelling of three-phase flow in automotive high-pressure fuel injectors. (Unpublished Doctoral thesis, City, University of London)

Gomez Santos, E., Shi, J., Gavaises, M. ORCID: 0000-0003-0874-8534 , Soteriou, C., Winterbourn, M. & Bauer, W. (2019). Investigation of cavitation and air entrainment during pilot injection in real-size multi-hole diesel nozzles. Fuel, 263, 116746.. doi: 10.1016/j.fuel.2019.116746

Gomez Santos, E., Shi, J., Venkatasubramanian, R. , Hoffmann, G., Gavaises, M. ORCID: 0000-0003-0874-8534 & Bauer, W. (2021). Modelling and prediction of cavitation erosion in GDi injectors operated with E100 fuel. Fuel, 289, 119923. doi: 10.1016/j.fuel.2020.119923

Gowree, E. R. & Atkin, C. J. (2014). Incompressible turbulent flow at the leading edge of swept wings. Paper presented at the 29th Congress of the International Council of the Aeronautical Sciences, 7-12 Sep 2014, St Petersburg, Russia.

Gowree, E. R. & Atkin, C. J. (2017). Measurement and modelling of the turbulent boundary layer near the attachment line of a swept wing. Aeronautical Journal, 121(1240), pp. 746-769. doi: 10.1017/aer.2017.30

Gowree, E. R. & Atkin, C. J. (2016). On the excitation of Tollmien-Schlichting waves due to surface vibration. Paper presented at the 52nd 3AF International Conference on Applied Aerodynamics, 27-29 Mar 2017, Lyon, France.

Gowree, E. R. & Atkin, C. J. (2015). On the turbulent mean-flow at the leading edge of a swept wing. Paper presented at the 50th 3AF International Conference on Applied Aerodynamics, 30 Mar - 01 Apr 2015, Toulouse, France.

Gowree, E. R., Atkin, C. J. & Gruppetta, S. (2015). A simple digital-optical system to improve accuracy of hot-wire measurements. MEASUREMENT SCIENCE and TECHNOLOGY, 26(9),

Gowree, E. R., Jagadeesh, C. & Atkin, C.J. (2019). Skin friction drag reduction over staggered three dimensional cavities. Aerospace Science and Technology, 84, pp. 520-529. doi: 10.1016/j.ast.2018.11.001

Gowree, E. R. ORCID: 0000-0001-5834-3020, Jagadeesh, C., Talboys, E. ORCID: 0000-0001-8993-0180 , Lageman, C. & Bruecker, C. ORCID: 0000-0001-5834-3020 (2018). Vortices enable the complex aerobatics of peregrine falcons. Communications Biology, 1, 27.. doi: 10.1038/s42003-018-0029-3

Guerrato, D., Nouri, J. M., Stosic, N. , Arcoumanis, C. & Smith, I. K. (2008). Flow measurements in the discharge port of a screw compressor. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 222(E4), pp. 201-210. doi: 10.1243/09544089JPME200

H

Hanjalic, K. & Stosic, N. (1978). Some aspects of laboratory testing and computer modelling of two-stage compressors with inter and after-cooling. Proceedings of the IMechE Conference on Design and Operarion of Industrial Compressors, pp. 11-19.

Hasheminejad, S. M., Chong, T. P., Lacagnina, G. , Joseph, P., Kim, J-H., Choi, K-S., Omidyeganeh, M. ORCID: 0000-0002-4140-2810, Pinelli, A. ORCID: 0000-0001-5564-9032 & Stalnov, O. (2020). On the manipulation of flow and acoustic fields of a blunt trailing edge aerofoil by serrated leading edges. The Journal of the Acoustical Society of America, 147(6), pp. 3932-3947. doi: 10.1121/10.0001377

Hawi, S., Gharavian, S., Burda, M. , Goel, S., Lotfian, S., Khaleque, T. & Yazdani Nezhad, H. ORCID: 0000-0003-0832-3579 (2021). Development of carbonaceous tin-based solder composite achieving unprecedented joint performance. Emergent Materials, doi: 10.1007/s42247-021-00337-9

Heidari-Koochi, M. ORCID: 0000-0001-9865-697X, Karathanassis, I. K. ORCID: 0000-0001-9025-2866, Koukouvinis, P. ORCID: 0000-0002-3945-3707 , Hwang, J., Pickett, L. M., Spivey, D. & Gavaises, M. ORCID: 0000-0003-0874-8534 (2022). Flow visualisation in real-size optical injectors of conventional, additised, and renewable gasoline blends. Energy Conversion and Management, 252, 115109. doi: 10.1016/j.enconman.2021.115109

Heiyanthuduwage, M. A., Mounoury, S. & Kovacevic, A. (2011). Performance prediction methods for screw compressors. In: 7th International Conference on Compressors and their Systems 2011. (pp. 411-420). Woodhead Publishing Limited.

Hernandez, T. P. A., Mills, A. R. & Yazdani Nezhad, H. ORCID: 0000-0003-0832-3579 (2020). Shear Driven Deformation and Damage Mechanisms in High-performance Carbon Fibre-reinforced Thermoplastic and Toughened Thermoset Composites Subjected to High Strain Loading. Composite Structures, doi: 10.1016/j.compstruct.2020.113289

Hess, D., Bruecker, C. ORCID: 0000-0001-5834-3020 & Nonn, T. (2013). Combined 3D Scanning PIV and Scanning LIF for flow and phase transfer measurements around a melting particle. Paper presented at the 10th International Symposium on Particle IMage Velocimetry, 01 - 03 July 2013, Delft, The Netherlands.

Holmes, C. S., Rane, S. & Wang, X. (2017). Manufacturing method and performance assessment for variable lead vacuum rotors. IOP Conference Series: Materials Science and Engineering, 232, 012022.. doi: 10.1088/1757-899X/232/1/012022

Howey, D. A., Holmes, A. S. & Pullen, K. R. (2011). Measurement and CFD Prediction of Heat Transfer in Air-Cooled Disc-Type Electrical Machines. IEEE Transactions on Industry Applications, 47(4), pp. 1716-1723. doi: 10.1109/TIA.2011.2156371

Howey, D. A., Holmes, A. S. & Pullen, K. R. (2010). Radially resolved measurement of stator heat transfer in a rotor-stator disc system. International Journal of Heat and Mass Transfer, 53(1-3), pp. 491-501. doi: 10.1016/j.ijheatmasstransfer.2009.09.006

Hu, J., Kaparias, I. & Bell, M. G. H. (2012). Current state and future outlook of traffic data fusion in London. Paper presented at the 15th International IEEE Conference on Intelligent Transportation Systems (ITSC), 16-09-2012 - 19-09-2012, Anchorage, Alaska, USA.

Hu, J., Kaparias, I. & Bell, M. G. H. (2009). Spatial econometrics models for congestion prediction with in-vehicle route guidance. IET Intelligent Transport Systems, 3(2), pp. 159-167. doi: 10.1049/iet-its:20070062

Husak, E., Kovacevic, A. ORCID: 0000-0002-8732-2242 & Karabegovic, I. (2019). Calculation of clearances in twin screw compressors. IOP Conference Series: Materials Science and Engineering, 604(1), ISSN 1757-8981 doi: 10.1088/1757-899X/604/1/012001

Hwang, J., Lee, P., Karathanasis, I. ORCID: 0000-0001-9025-2866 , Koukouvinis, F., Tagliante, F., Nguyen, T. & Pickett, L. (2022). A New Pathway for Prediction of Gasoline Sprays using Machine-Learning Algorithms. SAE Technical Papers, doi: 10.4271/2022-01-0492

Hwang, J., Lee, P., Mun, S. , Karathanassis, I. K. ORCID: 0000-0001-9025-2866, Koukouvinis, P. ORCID: 0000-0002-3945-3707, Pickett, L. & Gavaises, M. ORCID: 0000-0003-0874-8534 (2021). Machine-learning enabled prediction of 3D spray under engine combustion network spray G conditions. Fuel, 293, 120444. doi: 10.1016/j.fuel.2021.120444

Hwang, J., Lukas, W., Karathanassis, I. K. , Koukouvinis, F. ORCID: 0000-0002-3945-3707, Lyle, P. & Scott, S. (2020). Spatio-temporal identification of plume dynamics by 3D computed tomography using Engine Combustion Network Spray G injector and various fuels. Fuel, 280, 118359. doi: 10.1016/j.fuel.2020.118359

I

Iaria, D., Nipkey, H., Al Zaili, J. , Sayma, A. I. ORCID: 0000-0003-2315-0004 & Assadi, M. (2018). Development and Validation of a Thermo-Economic Model for Design Optimisation and Off-Design Performance Evaluation of a Pure Solar Microturbine. Energies, 11(11), 3199.. doi: 10.3390/en11113199

Iaria, D., Zhou, X., Al Zaili, J. ORCID: 0000-0003-4072-2107 , Zhang, Q., Xiao, G. & Sayma, A. I. (2019). Development of a Model for Performance Analysis of a Honeycomb Thermal Energy Storage for Solar Power Microturbine Applications. Energies, 12(20), 3968.. doi: 10.3390/en12203968

Idris, M. & Pullen, K. R. (2006). The Effect of Pre-swirl on the Discharge Coefficient of Rotating Axial Orifices. Paper presented at the International Conference on Energy and Environment (ICEE 2006), 28-30 Aug 2006, Selangor, Malaysia.

Iezzi, M. & Read, M. G. ORCID: 0000-0002-7753-2457 (2017). Enabling solid biomass fired small scale cogeneration systems with the twin screw wet steam expander technology. In: European Biomass Conference and Exhibition Online Proceedings 2017. European Biomass Conference and Exhibition Proceedings, 2017 (25thEU). (pp. 1938-1944). Florence: ETA-Florence Renewable Energies. ISBN 978-88-89407-17-2 doi: 10.5071/25thEUBCE2017-ICO.12.2

Ioannou, E. & Sayma, A. I. (2017). Full Annulus Numerical Study of Hot Streaks Propagation in a Hydrogen-rich Syngas-Fired Heavy Duty Axial Turbine. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 231(5), pp. 344-356. doi: 10.1177/0957650917706861

Isakhani, H., Aouf, N. ORCID: 0000-0001-9291-4077, Kechagias-Stamatis, O. & Whidborne, J. F. (2018). A Furcated Visual Collision Avoidance System for an Autonomous Micro Robot. IEEE Transactions on Cognitive and Developmental Systems, doi: 10.1109/TCDS.2018.2858742

Ison, S. & Kaparias, I. (2016). Universities' Transport Study Group UK Annual Conference 2015. Transportation Planning and Technology, 39(1), pp. 1-2. doi: 10.1080/03081060.2015.1113664

J

Jadidbonab, H., Malgarinos, I., Karathanassis, I. K. ORCID: 0000-0001-9025-2866 , Mitroglou, N. ORCID: 0000-0002-2955-8716 & Gavaises, M. ORCID: 0000-0003-0874-8534 (2018). We-T classification of diesel fuel droplet impact regimes. Proceedings of the Royal Society A: Mathematicsl, Physical and Engineering Sciences, 474(2215), doi: 10.1098/rspa.2017.0759

Jadidbonab, H., Mitroglou, N. ORCID: 0000-0002-2955-8716, Karathanassis, I. K. ORCID: 0000-0001-9025-2866 & Gavaises, M. ORCID: 0000-0003-0874-8534 (2018). Experimental Study of Diesel-Fuel Droplet Impact on a Similarly Sized Polished Spherical Heated Solid Particle. Langmuir, 34(1), pp. 36-49. doi: 10.1021/acs.langmuir.7b01658

Jagadeesh, C., Gowree, E. R. & Atkin, C. J. (2015). Development of a quantitative Schlieren imaging technicque for acoustic waves. Paper presented at the 51st 3AF International Conference on Applied Aerodynamics, 4-6 Apr 2016, Strasbourg, France.

Jagadeesh, C., Gowree, E. R., Jadidbonab, H. & Atkin, C. J. ORCID: 0000-0003-2529-1978 (2018). On the temporal analysis of acoustic waves using schlieren imaging. Measurement, 116, pp. 507-513. doi: 10.1016/j.measurement.2017.11.018

Javdani, S., Fabian, M., Ams, M. , Carlton, J., Sun, T. & Grattan, K. T. V. (2014). Fiber bragg grating-based system for 2-D analysis of vibrational modes of a steel propeller blade. Journal of Lightwave Technology, 32(23), pp. 3991-3997. doi: 10.1109/JLT.2014.2361631

Javdani, S., Fabian, M., Carlton, J. , Sun, T. & Grattan, K. T. V. (2016). Underwater free-vibration analysis of full-scale marine propeller using a Fibre Bragg Grating-based sensor system. IEEE Sensors Journal, 16(4), pp. 946-953. doi: 10.1109/JSEN.2015.2490478

Jiang, H., Chen, W., Zhang, Q. & He, L. (2015). Analytical-Solution Based Corner Correction for Transient Thermal Measurement. Journal of Heat Transfer, 137(11), 111302. doi: 10.1115/1.4030980

Jiang, H., He, L., Zhang, Q. & Wang, L. (2018). On scaling method to investigate high-speed over-tip-leakage flow at low-speed condition. Journal of Engineering for Gas Turbines and Power, 140(6), 062605.. doi: 10.1115/1.4038619

Jones, W. P., Marquis, A. J. & Vogiatzaki, K. (2014). Large-eddy simulation of spray combustion in a gas turbine combustor. Combustion and Flame, 161(1), pp. 222-239. doi: 10.1016/j.combustflame.2013.07.016

Joy, O. & Al-Zaili, J. ORCID: 0000-0003-4072-2107 (2021). On effectiveness of current energy policy instruments to make H2 production projects financially viable for developers: Case of the UK. International Journal of Hydrogen Energy, 46(65), pp. 32735-32749. doi: 10.1016/j.ijhydene.2021.07.147

Justino Vaz, M. G., Geber, E., Koukouvinis, F. , Karathanasis, I. ORCID: 0000-0001-9025-2866, Rodriguez Fernandez, C., Gavaises, M. & Mouokue, G. (2022). Numerical simulation of multicomponent diesel fuel spray surrogates using realfluid thermodynamic modelling. SAE Technical Papers, 2022-0, doi: 10.4271/2022-01-0509

K

Kabir, I. R. (2019). Modelling of Laser Surface Glazing for Metallic Materials by Finite Element Method. (Unpublished Doctoral thesis, City, University of London)

Kabir, I. R. & Naher, S. ORCID: 0000-0003-2047-5807 (2021). Thermal and thermomechanical modelling of laser melting processing techniques. In: Issa, A. & Brabazon, D. (Eds.), Laser Micro- and Nano-Scale Processing, Fundamentals and applications. (7.1-7.23). Bristol, UK: IOP Publishing. doi: 10.1088/978-0-7503-1683-5ch7

Kabir, I. R., Yin, D. & Naher, S. ORCID: 0000-0003-2047-5807 (2017). 3D Thermal Model of Laser Surface Glazing for H13 Tool Steel. AIP Conference Proceedings, 1896, 130003.. doi: 10.1063/1.5008152

Kabir, I. R., Yin, D. & Naher, S. (2016). Two dimensional finite element thermal model of laser surface glazing for H13 tool steel. AIP Conference Proceedings, 1769(1), p. 110003. doi: 10.1063/1.4963512

Kabir, I. R., Yin, D., Tamanna, N. & Naher, S. ORCID: 0000-0003-2047-5807 (2017). 3D Thermal Model of Laser Surface Glazing for Ti6Al4V alloy. Applied Sciences,

Kabir, I. R., Yin, D., Tamanna, N. & Naher, S. ORCID: 0000-0003-2047-5807 (2018). Thermomechanical modelling of laser surface glazing for H13 tool steel. Applied Physics A: Materials Science & Processing, 124(3), doi: 10.1007/s00339-018-1671-9

Kamps, L., Geyer, T. F., Sarradj, E. & Brücker, C. (2017). Vortex shedding noise of a cylinder with hairy flaps. Journal of Sound and Vibration, 388, pp. 69-84. doi: 10.1016/j.jsv.2016.10.039

Kamps, L., Hegner, F., Hess, D. & Bruecker, C. ORCID: 0000-0001-5834-3020 (2014). Volumetric velocimetry study in a transitional wall jet flow with passive flow control via flaps. Paper presented at the 17th International Symposium on Applications of Laser and Imaging Techniques to Fluid Mechanics, 7-10 July 2014, Lisbon, Portugal.

Kaparias, I. (2004). Bestimmung der Verkehrsqualität auf Streckenabschnitten von Hauptverkehrsstraßen – Untersuchungen zur praktischen Anwendbarkeit des Verfahrens nach Baier an ausgewählten Streckenabschnitten. (Unpublished Masters thesis, Aachen University)

Kaparias, I. (2008). Reliable dynamic in-vehicle navigation. (Unpublished Doctoral thesis, Imperial College)

Kaparias, I. & Bell, M. G. H. (2012). London Congestion Charging: Successes, Gaps and Future Opportunities Offered by Cooperative ITS. Paper presented at the 15th IEEE Conference on Intelligent Transportation Systems, 16-09-2012 - 19-09-2012, Anchorage, Alaska, USA.

Kaparias, I. & Bell, M. G. H. (2009). Testing a reliable in-vehicle navigation algorithm in the field. IET Intelligent Transport Systems, 3(3), pp. 314-324. doi: 10.1049/iet-its.2008.0075

Kaparias, I., Bell, M. G. H. & Belzner, H. (2008). A new measure of travel time reliability for in-vehicle navigation systems. Journal of Intelligent Transportation Systems: Technology, Planning, and Operations, 12(4), pp. 202-211. doi: 10.1080/15472450802448237

Kaparias, I., Bell, M. G. H., Biagioli, T. , Bellezza, L. & Mount, B. (2015). Behavioural analysis of interactions between pedestrians and vehicles in street designs with elements of shared space. Transportation Research Part F: Traffic Psychology and Behaviour, 30, pp. 115-127. doi: 10.1016/j.trf.2015.02.009

Kaparias, I., Bell, M. G. H., Biagioli, T. , Bellezza, L. & Mount, B. (2014). Behavioural analysis of vehicle-pedestrian interactions: The case of street designs with elements of shared space. Paper presented at the 93rd Annual Meeting of the Transportation Research Board, 12-01-2014 - 16-01-2014, Washington, DC, USA.

Kaparias, I., Bell, M. G. H., Bogenberger, K. & Chen, Y. (2007). An approach to time dependence and reliability in dynamic route guidance. Transportation Research Record, 2039, pp. 32-41. doi: 10.3141/2039-04

Kaparias, I., Bell, M. G. H., Chen, Y. & Bogenberger, K. (2007). ICNavS: A tool for reliable dynamic route guidance. IET Intelligent Transport Systems, 1(4), pp. 225-233. doi: 10.1049/iet-its:20060066

Kaparias, I., Bell, M. G. H., Dong, W. , Sastrawinata, A., Singh, A., Wang, X. & Mount, B. (2013). Analysis of pedestrian-vehicle traffic conflicts in street designs with elements of shared space. Transportation Research Record, 2393, pp. 21-30. doi: 10.3141/2393-03

Kaparias, I., Bell, M. G. H., Gosnall, E. , Abdul-Hamid, D., Dowling, M., Hemnani, I. & Mount, B. (2012). Assessing the pedestrian experience in public spaces. Paper presented at the 91st Annual Meeting of the Transportation Research Board, 22-26 Jan 2012, Washington, DC, USA.

Kaparias, I., Bell, M. G. H., Greensted, J. , Cheng, S., Miri, A., Taylor, C. & Mount, B. (2010). Development and implementation of a vehicle-pedestrian conflict analysis method: Adaptation of a vehicle-vehicle technique. Transportation Research Record, 2198, pp. 75-82. doi: 10.3141/2198-09

Kaparias, I., Bell, M. G. H., Miri, A. , Chan, C. & Mount, B. (2012). Analysing the perceptions of pedestrians and drivers to shared space. Transportation Research Part F: Traffic Psychology and Behaviour, 15(3), pp. 297-310. doi: 10.1016/j.trf.2012.02.001

Kaparias, I., Bell, M. G. H., Singh, A. , Dong, W., Sastrawinata, A., Wang, X. & Mount, B. (2013). Analysing the perceptions and behaviour of cyclists in street environments with elements of shared space. Paper presented at the 45th Annual Conference of the Universities’ Transport Study Group, January 2013, Oxford, UK.

Kaparias, I., Eden, N., Tsakarestos, A. , Gal-Tzur, A., Gerstenberger, M., Hoadley, S., Lefebvre, P., Ledoux, J. & Bell, M. G. H. (2012). Development and application of an evaluation framework for urban traffic management and Intelligent Transport Systems. Paper presented at the Transport Research Arena – Europe 2012, 23-04-2012 - 26-04-2012, Athens, Greece. doi: 10.1016/j.sbspro.2012.06.1276

Kaparias, I., Liu, P., Tsakarestos, A. , Eden, N., Schmitz, P., Hoadley, S. & Hauptmann, S. (2015). Development and testing of a predictive traffic safety evaluation tool for road traffic management and ITS impact assessment. Paper presented at the mobil.TUM 2015 International Scientific Conference on Mobility and Transport, 30-6-2015 - 1-7-2015, Munich.

Kaparias, I., Rossetti, C. & Trozzi, V. (2015). Analysing passenger arrivals rates and waiting time at bus stops. Paper presented at the 94th Annual Meeting of the Transportation Research Board, 11-01-2015 - 15-01-2015, Washington, DC, USA.

Karathanassis, I. K. ORCID: 0000-0001-9025-2866, Heidari-Koochi, M., Zhang, Q. , Hwang, J., Koukouvinis, P. ORCID: 0000-0002-3945-3707, Wang, J. & Gavaises, M. ORCID: 0000-0003-0874-8534 (2021). X-ray phase contrast and absorption imaging for the quantification of transient cavitation in high-speed nozzle flows. Physics of Fluids, 33(3), 032102. doi: 10.1063/5.0038475

Karathanassis, I. K. ORCID: 0000-0001-9025-2866, Hwang, J., Koukouvinis, P. ORCID: 0000-0002-3945-3707 , Pickett, L. & Gavaises, M. ORCID: 0000-0003-0874-8534 (2021). Combined visualisation of cavitation and vortical structures in a real-size optical diesel injector. Experiments in Fluids, 62(1), doi: 10.1007/s00348-020-03096-1

Karathanassis, I. K. ORCID: 0000-0001-9025-2866, Koukouvinis, F. ORCID: 0000-0001-9025-2866 & Gavaises, E. ORCID: 0000-0003-0874-8534 (2019). Multiphase phenomena in Diesel fuel injection systems. In: Simulations and Optical Diagnostics for Internal Combustion Engines. Energy, Environment, and Sustainability. (pp. 95-126). Singapore: Springer. doi: 10.1007/978-981-15-0335-1_8

Karathanassis, I. K., Koukouvinis, P. & Gavaises, M. (2017). Comparative evaluation of phase-change mechanisms for the prediction of flashing flows. International Journal of Multiphase Flow, 95, pp. 257-270. doi: 10.1016/j.ijmultiphaseflow.2017.06.006

Karathanassis, I. K., Koukouvinis, P. & Gavaises, M. (2016). Topology and distinct features of flashing flow in an injector nozzle. Atomization and Sprays, 26(12), pp. 1307-1336. doi: 10.1615/AtomizSpr.2016016510

Karathanassis, I. K. ORCID: 0000-0001-9025-2866, Koukouvinis, P. ORCID: 0000-0002-3945-3707, Kontolatis, E. , Lee, Z, Wang, J, Mitroglou, N. ORCID: 0000-0002-2955-8716 & Gavaises, M. ORCID: 0000-0003-0874-8534 (2018). High-speed visualization of vortical cavitation using synchrotron radiation. Journal of Fluid Mechanics, 838, pp. 148-164. doi: 10.1017/jfm.2017.885

Karathanassis, I. K. ORCID: 0000-0001-9025-2866, Koukouvinis, P. ORCID: 0000-0002-3945-3707, Lorenzi, M. , Kontolatis, E., Li, Z., Wang, J., Mitroglou, N. & Gavaises, M. ORCID: 0000-0003-0874-8534 (2017). High-speed X-Ray Phase-Contrast Imaging of String Cavitation in an Enlarged Diesel-Injector Orifice Replica. Paper presented at the ILASS–Europe 2017, 28th Conference on Liquid Atomization and Spray Systems, 6 - 8 September 2017, 6 - 8 September 2017 Valencia, Spain. doi: 10.4995/ILASS2017.2017.4996

Karathanassis, I. K., Papanicolaou, E., Belessiotis, V. & Bergeles, G. (2017). Design and experimental evaluation of a parabolic-trough concentrating photovoltaic/thermal (CPVT) system with high-efficiency cooling. Renewable Energy, 101, pp. 467-483. doi: 10.1016/j.renene.2016.09.013

Karathanassis, I. K. ORCID: 0000-0001-9025-2866, Papanicolaou, E., Belessiotis, V. & Bergeles, G. (2019). Dynamic simulation and exergetic optimization of a Concentrating Photovoltaic/ Thermal (CPVT) system. Renewable Energy, 135, pp. 1035-1047. doi: 10.1016/j.renene.2018.12.085

Karathanassis, I. K., Papanicolaou, E., Belessiotis, V. & Bergeles, G. (2013). Effect of secondary flows due to buoyancy and contraction on heat transfer in a two-section plate-fin heat sink. International Journal of Heat and Mass Transfer, 61(1), pp. 583-597. doi: 10.1016/j.ijheatmasstransfer.2013.02.028

Karathanassis, I. K., Papanicolaou, E., Belessiotis, V. & Bergeles, G. (2015). Experimental and numerical evaluation of an elongated plate-fin heat sink with three sections of stepwise varying channel width. International Journal of Heat and Mass Transfer, 84, pp. 16-34. doi: 10.1016/j.ijheatmasstransfer.2014.12.013

Karathanassis, I. K., Papanicolaou, E., Belessiotis, V. & Bergeles, G. (2014). Flow and Temperature Fields in Cooling Devices with Embedded Serpentine Tubes. Numerical Heat Transfer, Part A: Applications, 66(4), pp. 349-378. doi: 10.1080/10407782.2014.884864

Karathanassis, I. K., Papanicolaou, E., Belessiotis, V. & Bergeles, G. (2013). Multi-objective design optimization of a micro heat sink for Concentrating Photovoltaic/Thermal (CPVT) systems using a genetic algorithm. Applied Thermal Engineering, 59(1), pp. 733-744. doi: 10.1016/j.applthermaleng.2012.06.034

Karathanassis, I. K., Papanicolaou, E., Belessiotis, V. & Bergeles, G. (2013). Three-dimensional flow effects on forced convection heat transfer in a channel with stepwise-varying width. International Journal of Thermal Sciences, 67, pp. 177-191. doi: 10.1016/j.ijthermalsci.2012.12.016

Karathanassis, I. K. ORCID: 0000-0001-9025-2866, Pashkovski, E., Heidari-Koochi, M. , Jadidbonab, H. ORCID: 0000-0002-5481-9789, Smith, T., Gavaises, M. ORCID: 0000-0003-0874-8534 & Bruecker, C. ORCID: 0000-0001-5834-3020 (2019). Non-Newtonian flow of highly-viscous oils in hydraulic components. Journal of Non-Newtonian Fluid Mechanics, doi: 10.1016/j.jnnfm.2019.104221

Karathanassis, I. K. ORCID: 0000-0001-9025-2866, Trickett, K., Koukouvinis, P. ORCID: 0000-0002-3945-3707 , Wang, J., Barbour, R. & Gavaises, M. ORCID: 0000-0003-0874-8534 (2018). Illustrating the effect of viscoelastic additives on cavitation and turbulence with X-ray imaging. Scientific Reports, 8, p. 14968. doi: 10.1038/s41598-018-32996-w

Karcanias, N., Vafiadis, D. & Livada, M. ORCID: 0000-0002-0432-872X (2021). Orientation of Implicit State Space Models and the Partitioning of Kronecker Structure. IFAC-PapersOnLine, 54(9), pp. 108-113. ISSN 2405-8963 doi: 10.1016/j.ifacol.2021.06.069

Kassem, H. I. (2017). Flutter prediction of metallic and composite wings using coupled DSM-CFD models in transonic flow. (Unpublished Doctoral thesis, City, University of London)

Kassem, H. I., Liu, X. & Banerjee, J. R. (2016). Transonic flutter analysis using a fully coupled density based solver for inviscid flow. Advances in Engineering Software, 95, pp. 1-6. doi: 10.1016/j.advengsoft.2016.01.012

Katritsis, D. G., Theodorakakos, A., Pantos, I. , Andriotis, A., Efstathopoulos, E. P., Siontis, G., Karcanias, N., Redwood, S. & Gavaises, M. (2010). Vortex formation and recirculation zones in left anterior descending artery stenoses: computational fluid dynamics analysis. Physics in Medicine and Biology, 55(5), 1395-.. doi: 10.1088/0031-9155/55/5/009

Katritsis, D. G., Theodorakakos, A., Pantos, I. , Gavaises, M., Karcanias, N. & Efstathopoulos, E. P. (2012). Flow Patterns at Stented Coronary Bifurcations Computational Fluid Dynamics Analysis. Circulation: Cardiovascular Interventions, 5(4), pp. 530-539. doi: 10.1161/CIRCINTERVENTIONS.112.968347

Kechagias-Stamatis, O. & Aouf, N. ORCID: 0000-0001-9291-4077 (2019). Fusing Deep Learning and Sparse Coding for SAR ATR. IEEE Transactions on Aerospace and Electronic Systems, 55(2), pp. 785-797. doi: 10.1109/TAES.2018.2864809

Kechagias-Stamatis, O. & Aouf, N. ORCID: 0000-0001-9291-4077 (2019). A New Passive 3-D Automatic Target Recognition Architecture for Aerial Platforms. IEEE Transactions on Geoscience and Remote Sensing, 57(1), pp. 406-415. doi: 10.1109/TGRS.2018.2855065

Kechagias-Stamatis, O., Aouf, N. ORCID: 0000-0001-9291-4077 & Dubanchet, V. (2020). Evaluating 3D local descriptors and recursive filtering schemes for LIDAR-based uncooperative relative space navigation. Journal of Field Robotics, 37(5), pp. 848-888. doi: 10.1002/rob.21904

Kechagias-Stamatis, O., Aouf, N. ORCID: 0000-0001-9291-4077 & Richardson, M. A. (2019). High-speed multi-dimensional relative navigation for uncooperative space objects. Acta Astronautica, 160, pp. 388-400. doi: 10.1016/j.actaastro.2019.04.050

Kennedy, S., Wilson, M. & Rane, S. (2017). Combined Numerical Analysis of an Oil-free Twin Screw Compressor Using 3D CFD and 1D Multi-chamber Thermodynamic Model. IOP Conference Series: Materials Science and Engineering, 232, 012080.. doi: 10.1088/1757-899X/232/1/012080

Kewlani, G., Vogiatzaki, K., Shanbhogue, S. & Ghoniem, A. F. (2013). Validation study of large-eddy simulations of wake stabilized reacting flows using artificial flame thickening approaches. 51st AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition 2013, doi: 10.2514/6.2013-169

Khader, M. A. ORCID: 0000-0002-5771-2258, Ghavami, M. ORCID: 0000-0002-0772-7726, Al-Zaili, J. ORCID: 0000-0003-4072-2107 & Sayma, A. I. ORCID: 0000-0003-2315-0004 (2021). Heat Transfer Effect on Micro Gas Turbine Performance for Solar Power Applications. Energies, 14(20), 6745. doi: 10.3390/en14206745

Khader, M. A. ORCID: 0000-0002-5771-2258 & Sayma, A. I. ORCID: 0000-0003-2315-0004 (2018). Drag reduction within radial turbine rotor passages using riblets. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, doi: 10.1177/0954408918819399

Khader, M. A. & Sayma, A. I. (2017). Effect of end-wall riblets on radial turbine performance. IOP Conference Series: Materials Science and Engineering, 232(012075), doi: 10.1088/1757-899X/232/1/012075

Khaleque, T., Zhang, X., Kumar Thakur, V. , Aria, I. & Yazdani Nezhad, H. ORCID: 0000-0003-0832-3579 (2021). Tailoring of Thermo-Mechanical Properties of Hybrid Composite-Metal Bonded Joints. Polymers, 13(2), 170.. doi: 10.3390/polym13020170

Khoshkalam, N., Mojaddam, M. & Pullen, K. R. ORCID: 0000-0001-8501-9226 (2019). Characterization of the Performance of a Turbocharger Centrifugal Compressor by Component Loss Contributions. Energies, 12(14), 2711.. doi: 10.3390/en12142711

Kim, J-H., Choi, K-S., Lacagnina, G. , Chaitanya, P., Joseph, P., Hasheminejad, S. M., Chong, T. P., Shahab, M. F., Omidyeganeh, M. ORCID: 0000-0002-4140-2810 & Pinelli, A. (2021). Aerodynamic and Aeroacoustic Optimization of Leading-Edge Undulation of a NACA 65(12)-10 Airfoil. AIAA JOURNAL, doi: 10.2514/1.J060716

Kim, J. H., Choi, K. S., Lacagnina, G. , Joseph, P., Hasheminejad, S. M., Chong, T. P., Shahab, M. F., Omidyeganeh, M. ORCID: 0000-0002-4140-2810 & Pinelli, A. ORCID: 0000-0001-5564-9032 (2019). Optimization of leading-edge undulation of a NACA 65(12)-10 aerofoil for noise reduction and aerodynamic enhancement. In: Proceedings of the 23rd International Congress on Acoustics : integrating 4th EAA Euroregio 2019 : 9-13 September 2019 in Aachen, Germany. (pp. 5351-5358). Berlin: Deutsche Gesellschaft für Akustik. doi: 10.18154/RWTH-CONV-239781

Kim, S., Nouri, J. M., Yan, Y. & Arcoumanis, C. (2009). Effects of intake flow on the spray structure of a multi-hole injector in a DISI engine. International Journal of Automotive Technology, 10(3), doi: 10.1007/s12239-009-0032-2

Kim, S., Yan, Y., Nouri, J. M. & Arcoumanis, C. (2013). Effects of intake flow and coolant temperature on the spatial fuel distribution in a direct-injection gasoline engine by PLIF technique. Fuel, 106, pp. 737-748. doi: 10.1016/j.fuel.2012.10.002

Kirmse, C. & Brücker, C. (2014). On the jet formation through a leaky glottis. Journal of Fluids and Structures, 50, pp. 137-152. doi: 10.1016/j.jfluidstructs.2014.06.022

Kitade, S. & Pullen, K. R. (2016). Flywheel. In: Hashmi, S. (Ed.), Reference Module in Materials Science and Materials Engineering. . Elsevier. doi: 10.1016/B978-0-12-803581-8.03974-6

Koehler, M., Hess, D. & Bruecker, C. (2015). Flying PIV measurements in a 4-valve IC engine water analogue to characterize the near-wall flow evolution. Measurement Science and Technology, 26(12), 125302.. doi: 10.1088/0957-0233/26/12/125302

Kogan, I., Pacholak, S., Licht, M. , Schneider, J., Brücker, C. & Brandt, S. (2015). The invisible fish: hydrodynamic constraints for predator-prey interaction in fossil fish Saurichthys compared to recent actinopterygians. Biology Open, 4(12), pp. 1715-1726. doi: 10.1242/bio.014720

Kolovos, K., Koukouvinis, P., McDavid, R. M. & Gavaises, M. ORCID: 0000-0003-0874-8534 (2021). Transient cavitation and friction-induced heating effects of diesel fuel during the needle valve early opening stages for discharge pressures up to 450 mpa. Energies, 14(10), 2923. doi: 10.3390/en14102923

Kong, L., Jin, G., Meng, H. , Dong, Y., Wang, J., Liu, T., Sun, T. ORCID: 0000-0003-3861-8933 & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2019). Research on VCSEL interference analysis and elimination method. Proceedings of SPIE - The International Society for Optical Engineering, 11340, 113401W. doi: 10.1117/12.2548147

Kopanidis, A., Theodorakakos, A., Gavaises, M. & Bouris, D. (2011). Pore scale 3D modelling of heat and mass transfer in the gas diffusion layer and cathode channel of a PEM fuel cell. International Journal of Thermal Sciences, 50(4), pp. 456-467. doi: 10.1016/j.ijthermalsci.2010.11.014

Koukouvinis, F. ORCID: 0000-0002-3945-3707, Rodriguez, C., Hwang, J. , Karathanassis, I. K. ORCID: 0000-0001-9025-2866, Gavaises, M. ORCID: 0000-0003-0874-8534 & Pickett, L. (2021). Machine Learning and transcritical sprays: A demonstration study of their potential in ECN Spray-A. International Journal of Engine Research, doi: 10.1177/14680874211020292

Koukouvinis, F. ORCID: 0000-0002-3945-3707, Vidal-Roncero, A., Rodriguez, C. , Gavaises, M. ORCID: 0000-0003-0874-8534 & Pickett, L. (2020). Enhancing the Predictive Capabilities for High P/T Fuel Sprays; Non-Ideal Thermodynamic Modelling Using PC-SAFT. Ercoftac Series, 124,

Koukouvinis, P., Bergeles, G. & Gavaises, M. (2015). A cavitation aggressiveness index within the Reynolds averaged Navier Stokes methodology for cavitating flows. Journal of Hydrodynamics, Ser. B, 27(4), pp. 579-586. doi: 10.1016/S1001-6058(15)60519-4

Koukouvinis, P., Bergeles, G. & Gavaises, M. (2014). A new methodology for estimating cavitation erosion: Application on a high speed cavitation test RIG. Paper presented at the 11th World Congress on Computational Mechanics (WCCM XI), 20-25 Jul 2014, Barcelona, Spain.

Koukouvinis, P., Bruecker, C. & Gavaises, M. (2017). Unveiling the physical mechanism behind pistol shrimp cavitation. Scientific Reports, 7(1), 13994.. doi: 10.1038/s41598-017-14312-0

Koukouvinis, P. & Gavaises, M. (2015). Simulation of throttle flow with two phase and single phase homogenous equilibrium model. Journal of Physics: Conference Series, 656(1), 012086. doi: 10.1088/1742-6596/656/1/012086

Koukouvinis, P., Gavaises, M., Georgoulas, A. & Marengo, M. (2015). Compressible bubble dynamic simulations with central-upwind schemes. Journal of Physics: Conference Series, 656(1), 012087. doi: 10.1088/1742-6596/656/1/012087

Koukouvinis, P., Gavaises, M., Georgoulas, A. & Marengo, M. (2016). Compressible simulations of bubble dynamics with central-upwind schemes. International Journal of Computational Fluid Dynamics, 30(2), pp. 129-140. doi: 10.1080/10618562.2016.1166216

Koukouvinis, P., Gavaises, M., Li, J. & Wang, L. (2016). Large Eddy Simulation of Diesel injector including cavitation effects and correlation to erosion damage. Fuel, 175, pp. 26-39. doi: 10.1016/j.fuel.2016.02.037

Koukouvinis, P., Gavaises, M., Li, J. & Wang, L. (2015). Large Eddy Simulation of diesel injector opening with a two phase cavitation model. Journal of Physics: Conference Series, 656(1), 012088. doi: 10.1088/1742-6596/656/1/012088

Koukouvinis, P., Gavaises, M., Supponen, O. & Farhat, M. (2016). Numerical simulation of a collapsing bubble subject to gravity. Physics of Fluids, 28(3), doi: 10.1063/1.4944561

Koukouvinis, P., Gavaises, M., Supponen, O. & Farhat, M. (2016). Simulation of bubble expansion and collapse in the vicinity of a free surface. Physics of Fluids, 28(5), 052103.. doi: 10.1063/1.4949354

Koukouvinis, P., Karathanassis, I. K. & Gavaises, M. (2017). Prediction of cavitation and induced erosion inside a high-pressure fuel pump. International Journal of Engine Research, doi: 10.1177/1468087417708137

Koukouvinis, P. ORCID: 0000-0002-3945-3707, Kyriazis, N. & Gavaises, M. ORCID: 0000-0003-0874-8534 (2018). Smoothed particle hydrodynamics simulation of a laser pulse impact onto a liquid metal droplet. PLoS One, 13(9), e0204125. doi: 10.1371/journal.pone.0204125

Koukouvinis, P., Mitroglou, N., Gavaises, M. , Lorenzi, M. & Santini, M. (2017). Quantitative predictions of cavitation presence and erosion-prone locations in a high-pressure cavitation test rig. Journal of Fluid Mechanics, 819, pp. 21-57. doi: 10.1017/jfm.2017.156

Koukouvinis, P., Naseri, H. & Gavaises, M. (2017). Performance of turbulence and cavitation models in prediction of incipient and developed cavitation. International Journal of Engine Research, 18(4), pp. 333-350. doi: 10.1177/1468087416658604

Koukouvinis, P. ORCID: 0000-0002-3945-3707, Strotos, G., Zeng, Q. , Gonzalez-Avila, S. R., Theodorakakos, A., Gavaises, M. ORCID: 0000-0003-0874-8534 & Ohl, C-D. (2018). Parametric Investigations of the Induced Shear Stress by a Laser-Generated Bubble. Langmuir, 34(22), pp. 6428-6442. doi: 10.1021/acs.langmuir.8b01274

Koukouvinis, P. ORCID: 0000-0002-3945-3707, Vidal-Roncero, A. ORCID: 0000-0001-8177-518X, Rodriguez, C. , Gavaises, M. ORCID: 0000-0003-0874-8534 & Pickett, L. (2020). High pressure/high temperature multiphase simulations of dodecane injection to nitrogen: Application on ECN Spray-A. Fuel, 275, 117871.. doi: 10.1016/j.fuel.2020.117871

Kovacevic, A. (2015). 9th International Conference on Compressors and their Systems. IOP Conference Series: Materials Science and Engineering, 90(011001), doi: 10.1088/1757-899X/90/1/011001

Kovacevic, A. (2017). Algebraic generation of single domain computational grid for twin screw machines. Part I. Implementation. Advances in Engineering Software, 107, pp. 38-50. doi: 10.1016/j.advengsoft.2017.02.003

Kovacevic, A. (2017). Algebraic generation of single domain computational grid for twin screw machines. Part II. Validation. Advances in Engineering Software, 109, pp. 31-43. doi: 10.1016/j.advengsoft.2017.03.001

Kovacevic, A. (2017). Application of numerical grid generation for improved CFD analysis of multiphase screw machines. IOP Conference Series: Materials Science and Engineering, 232(012017), doi: 10.1088/1757-899X/232/1/012017

Kovacevic, A. ORCID: 0000-0002-8732-2242 (2005). Boundary adaptation in grid generation for CFD analysis of screw compressors. International Journal for Numerical Methods in Engineering, 64(3), pp. 401-426. doi: 10.1002/nme.1376

Kovacevic, A. (2008). Competence development in an international product design course. In: Proceedings DESIGN 2008, the 10th International Design Conference. (pp. 1383-1392). The Design Society.

Kovacevic, A. ORCID: 0000-0002-8732-2242 (2017). Foreword. IOP Conference Series: Materials Science and Engineering, 232(1), 011001.. doi: 10.1088/1757-899X/232/1/011001

Kovacevic, A. (2017). Modeling of Multiphase Twin Screw Machines. Keynote Paper presented at the 8th International Conference on Compressors and Refrigeration, 20-22 Jul 2017, Xi'an, China.

Kovacevic, A. (2002). Three dimensional numerical analysis for flow prediction in positive displacement screw machines. (Unpublished Doctoral thesis, City University London)

Kovacevic, A. & Kethidi, M. (2012). CFD Modeling in Screw Compressors with complex multi rotor configurations. Paper presented at the 21st International Compressor Engineering Conference, 16-19 Jul 2012, Indiana, USA.

Kovacevic, A., Mujic, E., Stosic, N. & Smith, I. K. (2011). Extending the Role of Computational Fluid Dynamics in Screw Machines. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 225(2), pp. 83-97. doi: 10.1177/0954408910397586

Kovacevic, A. & Rane, S. (2013). 3D CFD analysis of a twin screw expander. In: 8th International Conference on Compressors and their Systems. (pp. 417-429). Cambridge: Woodhead Publishing.

Kovacevic, A. ORCID: 0000-0002-8732-2242 & Rane, S. (2021). Challenges in 3D CFD Modelling of Rotary Positive Displacement Machines. Journal of Physics: Conference Series, 1909, 012063. doi: 10.1088/1742-6596/1909/1/012063

Kovacevic, A. & Stosic, N. (2015). Analytical Grid Generation for accurate representation of clearances in CFD for Screw Machines. IOP Conference Series: Materials Science and Engineering, 90(1), 012008. doi: 10.1088/1757-899X/90/1/012008

Kovacevic, A. & Stosic, N. (2016). CFD Analysis of Oil Flooded Twin Screw Compressors. Paper presented at the 23rd International Compressor Engineering Conference, 11-14 Jul 2016, Indiana, USA.

Kovacevic, A. & Stosic, N. (2013). Grid Generation for Screw Compressors with Variable Geometry Rotors. International Journal of Aerospace and Lightweight Structures, 3(2), doi: 10.3850/S2010428613000603

Kovacevic, A., Stosic, N., Jiang, Y. , Furmanczyk, M. & Lowry, S. (2014). Influence of approaches in CFD Solvers on Performance Prediction in Screw Compressors. Paper presented at the 22nd International Compressor Engineering Conference, 14-17 Jul 2014, West Lafayette, USA.

Kovacevic, A., Stosic, N. & Kethidi, M. (2014). Deforming grid generation and CFD analysis of variable geometry screw compressors. Computers & Fluids, 99, pp. 124-141. doi: 10.1016/j.compfluid.2014.04.024

Kovacevic, A. ORCID: 0000-0002-8732-2242, Stosic, N., Mujic, E. & Smith, I. K. ORCID: 0000-0003-1524-9880 (2007). CFD Integrated Design of Screw Compressors. Engineering Applications of Computational Fluid Mechanics, 1(2), pp. 96-108. doi: 10.1080/19942060.2007.11015185

Kovacevic, A., Stosic, N. & Smith, I. K. (2017). Editorial. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 231(1), p. 3. doi: 10.1177/0954408916685022

Kovacevic, A. ORCID: 0000-0002-8732-2242, Stosic, N. & Smith, I. K. ORCID: 0000-0003-1524-9880 (2004). A numerical study of fluid-solid interaction in screw compressors. International Journal on Computer Application in Technology, 21(4), pp. 148-158. doi: 10.1504/IJCAT.2004.006651

Kovacevic, A. & Udo, N. (2014). Fluid Machine - Bearing Inserts. Kovacevic,A., Udo, N. patent no. US 2014/0322059 A1

Kovacevic, A. ORCID: 0000-0002-8732-2242, Vukasinovic, N., Pavkovic, N. & Horak, P. (2017). Evaluation of “Codeve” methodology for teaching npd to virtual design teams. In: Proceedings of the 19th International Conference on Engineering and Product Design Education (E&PDE17), Building Community: Design Education for a Sustainable Future. (pp. 555-560). Glasgow: The Design Society.

Kovolos, K. (2021). Assessment of transient effects in diesel injectors affected by fouling and cavitation erosion. (Unpublished Doctoral thesis, City, University of London)

Krishnasamy, J., Ponnusami, S. A. ORCID: 0000-0002-2143-8971, Turteltaub, S. & van der Zwaag, S. (2019). Computational investigation of porosity effects on fracture behavior of thermal barrier coatings. Ceramics International, 45(16), pp. 20518-20527. doi: 10.1016/j.ceramint.2019.07.031

Krishnasamy, J., Ponnusami, S. A., Turteltaub, S. & van der Zwaag, S. (2018). Modelling the fracture behaviour of thermal barrier coatings containing healing particles. Materials & Design, 157, pp. 75-86. doi: 10.1016/j.matdes.2018.07.026

Krishnasamy, J., Ponnusami, S. A. ORCID: 0000-0002-2143-8971, Turteltaub, S. & van der Zwaag, S. (2019). Numerical Investigation into the Effect of Splats and Pores on the Thermal Fracture of Air Plasma-Sprayed Thermal Barrier Coatings. Journal of Thermal Spray Technology, doi: 10.1007/s11666-019-00949-y

Krishnasamy, J., Ponnusami, S. A. ORCID: 0000-0002-2143-8971, Turteltaub, S. & van der Zwaag, S. (2021). Thermal cyclic behavior and lifetime prediction of self-healing thermal barrier coatings. International Journal of Solids and Structures, 222-23, 111034. doi: 10.1016/j.ijsolstr.2021.03.021

Kumar, A., Ghobadian, A. & Nouri, J. ORCID: 0000-0001-8610-3737 (2021). Numerical simulation and experimental validation of cavitating flow in a multi-hole diesel fuel injector. International Journal of Engine Research, doi: 10.1177/1468087421998631

Kumar, A., Ghobadian, A. & Nouri, J. M. ORCID: 0000-0001-8610-3737 (2020). Assessment of Cavitation Models for Compressible Flows Inside a Nozzle. Fluids, 5(3), p. 134. doi: 10.3390/fluids5030134

Kumar, N. (2020). Non-Newtonian coupled field analysis of blood flow in normal and stenosed carotid artery with varying haemodynamic parameters. (Unpublished Doctoral thesis, City, University of London)

Kumar Bhoi, N., Singh, H., Pratap, S. , Naher, S. ORCID: 0000-0003-2047-5807 & Jain, P. K. (2022). Zinc oxide nanorods effect in micro structural and mechanical characteristics of aluminium composite material. Materials Science and Engineering: B, 278, 115641. doi: 10.1016/j.mseb.2022.115641

Kyriazis, N. (2018). Simulation of cavitation using compressible flow solvers. (Unpublished Doctoral thesis, City, University of London)

Kyriazis, N., Koukouvinis, F. ORCID: 0000-0002-3945-3707 & Gavaises, E. ORCID: 0000-0003-0874-8534 (2018). Modelling cavitation during drop impact on solid surfaces. Advances in Colloid and Interface Science, 260, doi: 10.1016/j.cis.2018.08.004

Kyriazis, N., Koukouvinis, F. ORCID: 0000-0002-3945-3707 & Gavaises, E. ORCID: 0000-0003-0874-8534 (2019). Numerical investigations on bubble-induced jetting and shock wave focusing: application on a needle-free injection. Proeceedings of the Royal Society A, 475, 20180548.. doi: 10.1098/rspa.2018.0548

Kyriazis, N., Koukouvinis, F. ORCID: 0000-0002-3945-3707, Gavaises, E. ORCID: 0000-0003-0874-8534 , Pearson, R. & Gold, M. (2018). Heating Effects During Bubble Collapse Using Tabulated Data. Paper presented at the The 10th International Symposium on Cavitation (CAV2018), 14-16 May 2018, Baltimore, USA. doi: 10.1115/1.861851_ch94

Kyriazis, N., Koukouvinis, F. ORCID: 0000-0002-3945-3707, Karathanassis, I. K. ORCID: 0000-0001-9025-2866 & Gavaises, M. ORCID: 0000-0003-0874-8534 (2018). A tabulated data technique for cryogenic two-phase flows. Paper presented at the 7th European Conference on Computational Fluid Dynamics, 11-15 Jun 2018, Glasgow, UK.

Kyriazis, N., Koukouvinis, P. ORCID: 0000-0002-3945-3707 & Gavaises, M. ORCID: 0000-0003-0874-8534 (2018). Modelling cavitation during drop impact on solid surfaces. Advances in Colloid and Interface Science, 260, pp. 46-64. doi: 10.1016/j.cis.2018.08.004

Kyriazis, N., Koukouvinis, P. & Gavaises, M. (2017). Numerical investigation of bubble dynamics using tabulated data. International Journal of Multiphase Flow, 93, pp. 158-177. doi: 10.1016/j.ijmultiphaseflow.2017.04.004

L

Lacagnina, G., Chaitanya, P., Berk, T. , Kim, J-H., Joseph, P., Ganapathisubramani, B., Hasheminejad, S. M., Chong, T. P., Stalnov, O., Choi, K-S., Shahab, M. F., Omidyeganeh, M. ORCID: 0000-0002-4140-2810 & Pinelli, A. ORCID: 0000-0001-5564-9032 (2019). Mechanisms of airfoil noise near stall conditions. Physical Review Fluids, 4(12), 123902.. doi: 10.1103/PhysRevFluids.4.123902

Lacagnina, G., Chaitanya, P., Kim, J. H. , Berk, T., Joseph, P., Choi, K. S., Ganapathisubramani, B., Hasheminejad, S. M., Chong, T. P., Stalnov, O., Shahab, M. F., Omidyeganeh, M. ORCID: 0000-0002-4140-2810 & Pinelli, A. ORCID: 0000-0001-5564-9032 (2021). Leading edge serrations for the reduction of aerofoil self-noise at low angle of attack, pre-stall and post-stall conditions. International Journal of Aeroacoustics, 20(1-2), pp. 130-156. doi: 10.1177/1475472X20978379

Laksmi, B., Nouri, J. M., Brabazon, D. & Naher, S. (2015). Prediction of properties for the production and application of graphene reinforced metal matrix composites. Paper presented at the 8th International Conference on Sustainable Energy & Environmental Protection (SEEP 2015), 11-14 August 2015, University of the West of Scotland, Paisley.

Lanchi, M., Al-Zaili, J. ORCID: 0000-0003-4072-2107, Russo, V. , Falchetta, M., Montecchi, M. & Aichmayer, L. (2022). A Quasi-Steady State Model of a Solar Parabolic Dish Micro Gas Turbine Demonstration Plant. Energies, 15(3), 1059. doi: 10.3390/en15031059

Laria, D (2020). Techno-economic assessment of a solar dish micro gas turbne system. (Unpublished Doctoral thesis, City, University of London)

Laria, D. (2019). Techno-economic assessment of a solar dish micro gas turbine system. (Unpublished Doctoral thesis, City, University of London)

Li, D., Barrington, J., James, S. , Ayre, D., Sloma, M., Lin, M-F. & Yazdani Nezhad, H. ORCID: 0000-0003-0832-3579 (2022). Electromagnetic Field Controlled Domain Wall Displacement for Induced Strain Tailoring in BaTiO3-Epoxy Nanocomposite. Scientific Reports, 12, 7504. doi: 10.1038/s41598-022-11380-9

Li, Q. (2020). Experimental study of flow pulse interacting with walls. (Unpublished Doctoral thesis, City, University of London)

Li, Q. ORCID: 0000-0001-7456-7868 & Bruecker, C. ORCID: 0000-0001-5834-3020 (2019). Comparative study of wall shear stress at the ascending aorta for different mechanical heart valve prostheses. Journal of Biomechanical Engineering, doi: 10.1115/1.4043357

Li, Q. & Bruecker, C. ORCID: 0000-0001-5834-3020 (2020). Sediment erosion in flexible canopies by vortex impact. Journal of Fluids and Structures, 97, 103058.. doi: 10.1016/j.jfluidstructs.2020.103058

Li, Q. & Bruecker, C. ORCID: 0000-0001-5834-3020 (2018). Vortex interaction with a rough wall formed by a hexagonal lattice of posts. Physics of Fluids, 30, 054107.. doi: 10.1063/1.5026463

Li, Q. ORCID: 0000-0001-7456-7868, Stavropoulos-Vasilakis, E., Koukouvinis, P. , Gavaises, M. ORCID: 0000-0003-0874-8534 & Bruecker, C. ORCID: 0000-0001-5834-3020 (2021). Micro-pillar sensor based wall-shear mapping in pulsating flows: In-Situ calibration and measurements in an aortic heart-valve tester. Journal of Fluids and Structures, 105, 103346. doi: 10.1016/j.jfluidstructs.2021.103346

Li, Y-L. & Sayma, A. I. (2014). Numerical investigation of VSVs mal-schedule effects in a threestage axial compressor. Paper presented at the ASME Turbo Expo 2014: Turbine Technical Conference and Exposition, 16-06-2014 - 20-06-2014, Dusseldorf, Germany. doi: 10.1115/GT2014-25145

Li, Y. & Sayma, A. I. (2017). Computational Fluid Dynamics Simulation of Surge in a Three Stage Axial Compressor. International Journal of Turbines & Sustainable Energy Systems, 1(1), doi: 10.4273/ijtses.1.1.04

Li, Y. & Sayma, A. I. (2014). Computational fluid dynamics simulations of blade damage effect on the performance of a transonic axial compressor near stall. Proceedings of the Institution of Mechanical Engineers Part C: Journal of Mechanical Engineering Science, doi: 10.1177/0954406214553828

Li, Y. & Sayma, A. I. (2012). Effects of blade damage on the performance of a transonic axial compressor rotor. Paper presented at the ASME Turbo Expo 2012: Turbine Technical Conference and Exposition, 11-06-2012 - 15-06-2012, Copenhagen, Denmark. doi: 10.1115/GT2012-68324

Lipowiecki, M., Ryvolova, M., Toettoesi, A. , Kolmer, N., Naher, S., Brennan, S.A., Vazquez, M. & Brabazon, D. (2014). Permeability of rapid prototyped artificial bone scaffold structures. Journal of Biomedical Materials Research Part A, 102(11), pp. 4127-4135. doi: 10.1002/jbm.a.35084

Liu, H., Du, W., Yazdani Nezhad, H. ORCID: 0000-0003-0832-3579 , Starr, A. & Zhao, Y. (2021). A Dissection and Enhancement Technique for Combined Damage Characterisation in Composite Laminates using Laser-line Scanning Thermography. Composite Structures, 271, 114168. doi: 10.1016/j.compstruct.2021.114168

Liu, J., Khan, U., Coleman, J. , Fernandez, B., Rodriguez, P., Naher, S. & Brabazon, B. (2016). Graphene Oxide and Graphene Nanosheet Reinforced Aluminium Matrix Composites: powder synthesis and prepared composite characteristics. Materials & Design, 94, pp. 87-94. doi: 10.1016/j.matdes.2016.01.031

Liu, J., Silveira, J., Groarke, R. , Parab, S., Singh, H., McCarthy, E., Karazi, S., Mussatto, A., Houghtaling, J., Ahad, I. U., Naher, S. ORCID: 0000-0003-2047-5807 & Brabazon, D. (2019). Effect of powder metallurgy synthesis parameters for pure aluminium on resultant mechanical properties. International Journal of Material Forming, 12(1), pp. 79-87. doi: 10.1007/s12289-018-1408-5

Liu, X. & Banerjee, J. R. (2016). Free vibration analysis for plates with arbitrary boundary conditions using a novel spectral-dynamic stiffness method. Computers and Structures, 164, pp. 108-126. doi: 10.1016/j.compstruc.2015.11.005

Liu, X. & Banerjee, J. R. (2015). An exact spectral-dynamic stiffness method for free flexural vibration analysis of orthotropic composite plate assemblies - Part I: Theory. Composite Structures, 132, pp. 1274-1287. doi: 10.1016/j.compstruct.2015.07.020

Liu, X. & Banerjee, J. R. (2015). An exact spectral-dynamic stiffness method for free flexural vibration analysis of orthotropic composite plate assemblies - Part II: Applications. Composite Structures, 132, pp. 1288-1302. doi: 10.1016/j.compstruct.2015.07.022

Liu, X. & Banerjee, J. R. (2017). A spectral dynamic stiffness method for free vibration analysis of plane elastodynamic problems. Mechanical Systems and Signal Processing, 87, doi: 10.1016/j.ymssp.2016.10.017

Liu, X., Kassem, H. I. & Banerjee, J. R. (2016). An exact spectral dynamic stiffness theory for composite plate-like structures with arbitrary non-uniform elastic supports, mass attachments and coupling constraints. Composite Structures, 142, pp. 140-154. doi: 10.1016/j.compstruct.2016.01.074

Liu, X., Li, Y., Lin, Y. & Banerjee, R. (2021). Spectral dynamic stiffness theory for free vibration analysis of plate structures stiffened by beams with arbitrary cross-sections. Thin-Walled Structures, 160, 107391. doi: 10.1016/j.tws.2020.107391

Liu, X., Lu, Z., Adhikari, S. , Li, Y. L. & Banerjee, J. R. (2022). Exact wave propagation analysis of lattice structures based on the dynamic stiffness method and the Wittrick–Williams algorithm. Mechanical Systems and Signal Processing, 174, 109044. doi: 10.1016/j.ymssp.2022.109044

Liu, X., Qiu, S., Xie, S. & Banerjee, R. (2022). Extension of the Wittrick-Williams Algorithm for Free Vibration Analysis of Hybrid Dynamic Stiffness Models Connecting Line and Point Nodes. Mathematics, 10(1), 57. doi: 10.3390/math10010057

Liu, X., Sun, C., Banerjee, R. , Dan, H-C. & Chang, L. (2020). An exact dynamic stiffness method for multibody systems consisting of beams and rigid-bodies. Mechanical Systems and Signal Processing, 150, 107264. doi: 10.1016/j.ymssp.2020.107264

Liu, X., Zhao, Y., Zhou, W. & Banerjee, J. R. (2022). Dynamic stiffness method for exact longitudinal free vibration of rods and trusses using simple and advanced theories. Applied Mathematical Modelling, 104, pp. 401-420. doi: 10.1016/j.apm.2021.11.023

Liu, Y., Lemanski, S., Zhang, X. , Ayre, D. & Yazdani Nezhad, H. ORCID: 0000-0003-0832-3579 (2018). A finite element study of fatigue crack propagation in single lap bonded joint with process-induced disbond. International Journal of Adhesion and Adhesives, 87, pp. 164-172. doi: 10.1016/j.ijadhadh.2018.10.005

Liu, Y., Zhang, X., Lemanski, S. , Yazdani Nezhad, H. ORCID: 0000-0003-0832-3579 & Ayre, D. (2019). Experimental and numerical study of process-induced defects and their effect on fatigue debonding in composite joints. International Journal of Fatigue, 125, pp. 47-57. doi: 10.1016/j.ijfatigue.2019.03.033

Lockett, John Francis (1987). Heat Transfer from Roughened Surfaces using Laser Interferometry. (Unpublished Doctoral thesis, City, University of London)

Lockett, R. D. (2009). Instabilities and soot formation in high pressure explosion flames. Paper presented at the The British-French Flame Days, 02 - 03 April 2009, Lille, France.

Lockett, R. D. (2006). Instabilities and soot formation in spherically expanding, high pressure, rich, iso-octane-air flames. Journal of Physics: Conference Series, 45, pp. 154-160. doi: 10.1088/1742-6596/45/1/020

Lockett, R. D. (2010). A length-scale analysis of instabilities in high pressure explosion flames,. Paper presented at the International Conference on Sustainable Combustion, 06 - 10 June 2010, Canary Islands.

Lockett, R. D., Ball, D. & Robertson, G. (2013). Experimental cross-correlation Nitrogen Q-branch CARS Thermometry in a Spark Ignition Engine. Optics and Lasers in Engineering, 51(7), pp. 929-943. doi: 10.1016/j.optlaseng.2013.02.010

Lockett, R. D. ORCID: 0000-0002-7883-6241 & Bonifacio, A. (2019). Hydrodynamic Luminescence in a Model Diesel Injector Return Valve. International Journal of Engine Research, doi: 10.1177/1468087419870421

Lockett, R. D. ORCID: 0000-0002-7883-6241, Bonifacio, A. & Price, R. (2018). Cavitating Flow in a Model Diesel Injector Return Valve. In: Proceedings of the 10th Symposium on Cavitation (CAV2018). (pp. 154-159). New York: ASME. ISBN 9780791861851 doi: 10.1115/1.861851_ch31

Lockett, R. D., Fatmi, Z., Kuti, O. & Price, R. (2015). An Investigation into the Effect of Hydrodynamic Cavitation on Diesel using Optical Extinction. Journal of Physics: Conference Series, 656(1), 012091. doi: 10.1088/1742-6596/656/1/012091

Lockett, R. D., Fatmi, Z., Kuti, O. & Price, R. (2016). An Optical Characterization of the Effect of High-Pressure Hydrodynamic Cavitation on Diesel. SAE Technical Papers, 2016-01-08. doi: 10.4271/2016-01-0841

Lockett, R. D. & Greenhalgh, D. A. (2010). Fuel distribution measurements in a model low NOx double annular combustor using laser induced fluorescence. Paper presented at the ILASS Europe - 23rd Annual Conference on Liquid Atomization and Spray Systems, 03 - 07 September 2010, Brno, Czech Replublic.

Lockett, R. D. & Greenhalgh, D. A. (2010). The optical characterisation of spray and soot formation in a diesel engine. Paper presented at the International Conference on Sustainable Combustion (SPEIC'10), 06 - 09 June 2010, Canary Islands.

Lockett, R. D., Huang, Y. & Woolley, R. (2014). Instabilities in high pressure, iso-octane-air spherical explosion flames. Paper presented at the 8th International Seminar on Flame Structure, 21-24 Sep 2014, Berlin, Germany. doi: 10.13140/2.1.1268.7364

Lockett, R. D., Jeshani, M., Makri, K. & Price, R. (2016). An Optical Characterization of Atomization in Non-Evaporating Diesel Sprays. SAE Technical Papers, 2016-01-08. doi: 10.4271/2016-01-0865

Lockett, R. D., Liverani, L., Thaker, D. & Arcoumanis, C. (2009). The characterisation of diesel cavitating flow using time-resolved light scattering. Paper presented at the IMechE Conference on Injection Systems for IC Engines, 13 - 14 May 2009, London, UK.

Lockett, R. D., Liverani, L., Thaker, D. , Jeshani, M. & Tait, N. P. (2013). The characterisation of diesel nozzle flow using high speed imaging of elastic light scattering. Fuel, 106, pp. 605-616. doi: 10.1016/j.fuel.2012.10.065

Lockett, R. D., Ndamuso, N. & Price, R. (2015). Cavitation Inception in Immersed Jet Shear Flows. Journal of Physics: Conference Series, 656(1), 012090. doi: 10.1088/1742-6596/656/1/012090

Lockett, R. D. & Robertson, G. (2014). A Dynamical Systems Analysis of Methanol-Air Auto-Ignition. ., doi: 10.13140/2.1.2907.1369

Lockett, R. D. & Woolley, R. (2007). Instabilities and soot formation in high-pressure, rich, iso-octane-air explosion flames - 1. Dynamical structure. Combustion and Flame, 151(4), pp. 601-622. doi: 10.1016/j.combustflam.2007.08.004

Lotfian, S., Giraudmaillet, C., Yoosefinejad, A. , Thakur, V. K. & Yazdani Nezhad, H. ORCID: 0000-0003-0832-3579 (2018). Electrospun Piezoelectric Polymer Nanofiber Layers for Enabling in Situ Measurement in High-Performance Composite Laminates. ACS Omega, 3(8), pp. 8891-8902. doi: 10.1021/acsomega.8b00940

Lu, Y., Kovacevic, A. ORCID: 0000-0002-8732-2242 & Read, M. G. ORCID: 0000-0002-7753-2457 (2018). Numerical study on screw machines with large helix angles. IOP Conference Series: Materials Science and Engineering, 425(1), 012015.. doi: 10.1088/1757-899X/425/1/012023

Lu, Y., Kovacevic, A. ORCID: 0000-0002-8732-2242, Read, M. G. ORCID: 0000-0002-7753-2457 & Basha, N (2019). Numerical study of customised mesh for twin screw vacuum pumps. Designs, 3(4), 52.. doi: 10.3390/designs3040052

Lu, Y., Kovacevic, A., Read, M. G. ORCID: 0000-0002-7753-2457 , Buckney, D. & Endo, Y. (2021). Investigation of Screw Compressors for Low Pressure Ratio Applications. IOP Conference Series: Materials Science and Engineering, 1180(1), ISSN 1757-8981 doi: 10.1088/1757-899x/1180/1/012006

Lun, Y. H., Carlton, J. & Bichou, K. (2016). Examining the economic impact of transport complex economies. Journal of Shipping and Trade, 1(1), doi: 10.1186/s41072-016-0005-3

Lyras, T. ORCID: 0000-0002-9783-4786, Karathanasis, I. ORCID: 0000-0001-9025-2866, Kyriazis, N. , Koukouvinis, F. ORCID: 0000-0002-3945-3707 & Gavaises, M. (2021). Modelling of liquid oxygen nozzle flows under subcritical and supercritical pressure conditions. International Journal of Heat and Mass Transfer, 177, 121559. doi: 10.1016/j.ijheatmasstransfer.2021.121559

M

M.G., Mithun, Koukouvinis, F. ORCID: 0000-0002-3945-3707, Karathanassis, I. K. ORCID: 0000-0001-9025-2866 & Gavaises, M. ORCID: 0000-0003-0874-8534 (2018). Simulating the effect of in-nozzle cavitation on liquid atomisation using a three-phase model. Paper presented at the The 10th International Symposium on Cavitation (CAV2018), 14-16 May 2018, Baltimore, USA.

Ma, H., Wang, Z., Wang, L. , Zhang, Q., Yang, Z. & Bao, Y. (2016). Ramp heating in high-speed transient thermal measurement with reduced uncertainty. Journal of Propulsion and Power, 32(5), pp. 1190-1198. doi: 10.2514/1.B35803

Madhav, K. V. & Kovacevic, A. (2015). Economics of water injected air screw compressor systems. IOP Conference Series: Materials Science and Engineering, 90(1), 012012. doi: 10.1088/1757-899X/90/1/012012

Mahmoud, M., Alkhedher, M., Ramadan, M. , Naher, S. ORCID: 0000-0003-2047-5807 & Pullen, K. (2022). An investigation on organic Rankine cycle incorporating a ground-cooled condenser: Working fluid selection and regeneration. Energy, 249, 123742. doi: 10.1016/j.energy.2022.123742

Mahmoud, M., Alkhedher, M., Ramadan, M. , Pullen, K. R. ORCID: 0000-0001-8501-9226, Olabi, A-G. & Naher, S. ORCID: 0000-0003-2047-5807 (2022). Experimental investigation into the potential of using a shallow ground-cooled condenser in Lebanon. Energy Conversion and Management, 264, 115729. doi: 10.1016/j.enconman.2022.115729

Mahmoud, M., Ramadan, M., Naher, S. ORCID: 0000-0003-2047-5807 , Pullen, K. & Olabi, A-G. (2021). CO2 – based transcritical Rankine cycle coupled with a ground-cooled condenser. Thermal Science and Engineering Progress, 25, 100948. doi: 10.1016/j.tsep.2021.100948

Mahmoud, M., Ramadan, M., Naher, S. , Pullen, K. R., Ali Abdelkareem, M. & Olabi, A-G. (2021). A review of geothermal energy-driven hydrogen production systems. Thermal Science and Engineering Progress, 22, 100854. doi: 10.1016/j.tsep.2021.100854

Mahmoud, M., Ramadan, M., Naher, S. ORCID: 0000-0003-2047-5807 , Pullen, K. R. ORCID: 0000-0001-8501-9226, Baroutaji, A. & Olabi, A-G. (2020). Recent advances in district energy systems: A review. Thermal Science and Engineering Progress, doi: 10.1016/j.tsep.2020.100678

Mahmoud, M., Ramadan, M., Naher, S. ORCID: 0000-0003-2047-5807 , Pullen, K. R. ORCID: 0000-0001-8501-9226 & Olabi, A-G. (2020). The impacts of different heating systems on the environment: A review. Science of The Total Environment, doi: 10.1016/j.scitotenv.2020.142625

Mahmoud, M., Ramadan, M., Olabi, A-G. , Pullen, K. R. ORCID: 0000-0001-8501-9226 & Naher, S. ORCID: 0000-0003-2047-5807 (2020). A review of mechanical energy storage systems combined with wind and solar applications. Energy Conversion and Management, 210, p. 112670. doi: 10.1016/j.enconman.2020.112670

Mahmoud, M., Ramadan, M., Pullen, K. R. , Abdelkareem, M. A., Wilberforce, T., Olabi, A-G. & Naher, S. (2021). A review of grout materials in geothermal energy applications. International Journal of Thermofluids, 10, 100070. doi: 10.1016/j.ijft.2021.100070

Makri, K., Lockett, R. D. ORCID: 0000-0002-7883-6241 & Jeshani, M. (2019). Dynamics of Post-Injection Fuel Flow in Mini-Sac Diesel Injectors Part 1: Admission of 1 External Gases and Implications for Deposit Formation. International Journal of Engine Research, doi: 10.1177/1468087419895425

Makri, K., Lockett, R. D., Jeshani, M. & Price, R. (2016). The effect of cavitation on atomization in non-evaporating diesel sprays. Paper presented at the ILASS – Europe 2016, 27th Annual Conference on Liquid Atomization and Spray Systems, 4-7 Sep 2016, Brighton, UK. doi: 10.13140/RG.2.1.1085.1444/1

Malgarinos, I., Nikolopoulos, N. & Gavaises, M. (2015). Coupling a local adaptive grid refinement technique with an interface sharpening scheme for the simulation of two-phase flow and free-surface flows using VOF methodology. Journal of Computational Physics, 300, pp. 732-753. doi: 10.1016/j.jcp.2015.08.004

Malgarinos, I., Nikolopoulos, N. & Gavaises, M. (2017). Numerical investigation of heavy fuel droplet-particle collisions in the injection zone of a Fluid Catalytic Cracking reactor, Part I: Numerical model and 2D simulations. Fuel Processing Technology, 156, pp. 317-330. doi: 10.1016/j.fuproc.2016.09.014

Malgarinos, I., Nikolopoulos, N. & Gavaises, M. (2017). Numerical investigation of heavy fuel droplet-particle collisions in the injection zone of a Fluid Catalytic Cracking reactor, part II: 3D simulations. Fuel Processing Technology, 156, pp. 43-53. doi: 10.1016/j.fuproc.2016.09.012

Malgarinos, I., Nikolopoulos, N. & Gavaises, M. (2016). A numerical study on droplet-particle collision dynamics. International Journal of Heat and Fluid Flow, doi: 10.1016/j.ijheatfluidflow.2016.06.010

Malgarinos, I., Nikolopoulos, N., Marengo, M. , Antonini, C. & Gavaises, M. (2014). VOF simulations of the contact angle dynamics during the drop spreading: Standard models and a new wetting force model. Advances in Colloid and Interface Science, 212, pp. 1-20. doi: 10.1016/j.cis.2014.07.004

Mallepally, R. R., Bamgbade, B., Rowane, A. J. , Rokni, H. B., Newkirk, M. S. & McHugh, M. A. (2018). Fluid properties at high pressures and temperatures: Experimental and modelling challenges. The Journal of Supercritical Fluids, 134, pp. 33-40. doi: 10.1016/j.supflu.2017.12.003

Mamo, J., Farrugia, P., Borg, J. , Wodehouse, A., Grierson, H. & Kovacevic, A. ORCID: 0000-0002-8732-2242 (2015). Using engineering design tools in multidisciplinary distributed student teams. In: Kovacevic, A. ORCID: 0000-0002-8732-2242, Bingham, G. & Parkinson, B. (Eds.), Proceedings of the 17th International Conference on Engineering and Product Design Education (E&PDE15), Great Expectations: Design Teaching, Research & Enterprise. (pp. 99-104). Glasgow: The Design Society. ISBN 9781904670629

Mamouei, M. H., Kaparias, I. & Halikias, G. ORCID: 0000-0003-1260-1383 (2018). A framework for user- and system-oriented optimisation of fuel efficiency and traffic flow in Adaptive Cruise Control. Transportation Research Part C: Emerging Technologies, 92, pp. 27-41. doi: 10.1016/j.trc.2018.02.002

Mamouei, M. H., Kaparias, I. & Halikias, G. (2015). A quantitative approach to behavioural analysis of drivers in highways using particle filtering. Paper presented at the 47th Annual Conference of the Universities’ Transport Study Group, 05-01-2015 - 07-01-2015, London, UK.

Mamouei, M. H., Kaparias, I. & Halikias, G. (2016). A quantitative approach to behavioural analysis of drivers in highways using particle filtering. Transportation Planning and Technology, 39(1), doi: 10.1080/03081060.2015.1108084

Manolesos, M. ORCID: 0000-0002-5506-6061 (2022). Vortex identification methods applied to wind turbine tip vortices. Wind Energy Science, 7(2), pp. 585-602. doi: 10.5194/wes-7-585-2022

Manolesos, M. ORCID: 0000-0002-5506-6061, Gao, Z. & Bouris, D. (2018). Experimental investigation of the atmospheric boundary layer flow past a building model with openings. Building and Environment, 141, pp. 166-181. doi: 10.1016/j.buildenv.2018.05.049

Manolesos, M. ORCID: 0000-0002-5506-6061 & Papadakis, G. (2021). Investigation of the three-dimensional flow past a flatback wind turbine airfoil at high angles of attack. Physics of Fluids, 33(8), 085106. doi: 10.1063/5.0055822

Manolesos, M. ORCID: 0000-0002-5506-6061, Papadakis, G. & Voutsinas, S. G. (2020). Revisiting the assumptions and implementation details of the BAY model for vortex generator flows. Renewable Energy, 146, pp. 1249-1261. doi: 10.1016/j.renene.2019.07.063

Manolesos, M. ORCID: 0000-0002-5506-6061, Sørensen, N. N., Troldborg, N. , Florentie, L., Papadakis, G. & Voutsinas, S. (2016). Computing the flow past Vortex Generators: Comparison between RANS Simulations and Experiments. Journal of Physics: Conference Series, 753(2), 022014. doi: 10.1088/1742-6596/753/2/022014

Manolesos, M. ORCID: 0000-0002-5506-6061 & Voutsinas, S. G. (2016). Experimental study of drag-reduction devices on a flatback airfoil. AIAA Journal, 54(11), pp. 3382-3396. doi: 10.2514/1.J054901

Marchi, A., Nouri, J. M., Yan, Y. & Arcoumanis, C. (2010). Spray stability of outwards opening pintle injectors for stratified direct injection spark ignition engine operation. International Journal of Engine Research, 11(6), pp. 413-437. doi: 10.1243/14680874JER605

Marchi, A., Yan, Y., Nouri, J. M. & Arcoumanis, C. (2013). PIV Investigation on Flows Induced by Fuel Sprays from an Outwards Opening Pintle Injector for GDI engines. Paper presented at the ILASS 2013 - 25th Annual Conference on Liquid Atomization and Spray Systems, 1-4 Sept 2013, Chania, Crete.

Marichal, N., Tomas-Rodriguez, M., Castillo Rivera, S. & Hernandez, A. (2012). Modelling and Analysis of Vibrations in a UAV Helicopter with a Vision System. International Journal of Advanced Robotic Systems, 9, p. 220. doi: 10.5772/52761

Marichal, N., Tomas-Rodriguez, M., Hernandez, A. , Castillo, S. & Campoy, P. (2013). Vibration reduction for vision systems on board UAV using a neuro-fuzzy controller. Journal of Vibration and Control, 20(15), pp. 2243-2253. doi: 10.1177/1077546313479632

Mattheus, W. & Bruecker, C. ORCID: 0000-0001-5834-3020 (2018). Characteristics of the pulsating jet flow through a dynamic glottal model with a lens-like constriction. Biomedical Engineering Letters, doi: 10.1007/s13534-018-0075-2

Mavridou, S., Mavropoulos, G. C., Bouris, D. , Hountalas, D. T. & Bergeles, G. (2010). Comparative design study of a diesel exhaust gas heat exchanger for truck applications with conventional and state of the art heat transfer enhancements. Applied Thermal Engineering, 30(8-9), pp. 935-947. doi: 10.1016/j.applthermaleng.2010.01.003

Mengxiao, T., Yun, W., Hongyu, W. , Shanguang, G., Zhengzhong, S. ORCID: 0000-0002-3862-7939 & Jiaming, S. (2018). Characterization of transverse plasma jet and its effects on ramp induced separation. Experimental Thermal and Fluid Science, 99, pp. 584-594. doi: 10.1016/j.expthermflusci.2018.05.023

Mercieca, J., Kaparias, I., Bell, M. G. H. & Finch, E. (2011). Integrated street design in high-volume junctions: The case study of London’s Oxford Circus. Paper presented at the 1st International Conference on Access Management, 15-17 June 2011, Athens, Greece.

Mgbemena, C. O., Li, D., Lin, M-F. , Liddel, P. D., Katnam, K. B., Thakur, V. K. & Yazdani Nezhad, H. ORCID: 0000-0003-0832-3579 (2018). Accelerated microwave curing of fibre-reinforced thermoset polymer composites for structural applications: A review of scientific challenges. Composites Part A: Applied Science and Manufacturing, 115, pp. 88-103. doi: 10.1016/j.compositesa.2018.09.012

Miah, S., Kaparias, I., Ayub, N. , Milonidis, E. & Holmes, W. (2019). Measuring cycle riding comfort in Southampton using an instrumented bicycle. In: 6th International Conference on Models and Technologies for Intelligent Transportation Systems (MT-ITS). . IEEE. doi: 10.1109/MTITS.2019.8883328

Miah, S., Kaparias, I. & Liatsis, P. (2015). Development and testing of a prototype instrumented bicycle model for the prevention of cyclist accidents. Paper presented at the 47th Annual Conference of the Universities’ Transport Study Group, 05-01-2015 - 07-01-2015, City University London, UK.

Miah, S., Milonidis, E., Kaparias, I. & Karcanias, N. ORCID: 0000-0002-1889-6314 (2018). A Novel Fusion Algorithm to Improve Localisation Accuracy of an Instrumented Bicycle. Paper presented at the 97th Annual Meeting of the Transportation Research Board, 7 - 11 January 2018, Washington, USA.

Miao, X. (2018). Turbine end-wall aerothermal management with engineered surface structure. (Unpublished Doctoral thesis, City, University of London)

Miao, X., Zhang, Q. ORCID: 0000-0003-0982-2986, Atkin, C.J. ORCID: 0000-0003-2529-1978 , Sun, Z. & Li, Y. (2018). Improving Purge Air Cooling Effectiveness by Engineered End-Wall Surface Structures-Part I: Duct Flow. Journal Of Turbomachinery, 140(9), 091001. doi: 10.1115/1.4040853

Miao, X., Zhang, Q. ORCID: 0000-0003-0982-2986, Atkin, C.J. ORCID: 0000-0003-2529-1978 , Sun, Z. & Li, Y. (2018). Improving Purge Air Cooling Effectiveness by Engineered End-Wall Surface Structures-Part II: Turbine Cascade. Journal Of Turbomachinery, 140(9), 091002. doi: 10.1115/1.4040854

Miao, X., Zhang, Q., Jiang, H. & Qi, H. (2014). Application of riblets on turbine blade endwall secondary flow control. Paper presented at the ASME Turbo Expo 2014: Turbine Technical Conference and Exposition, 16-06-2014 - 20-06-2014, Dusseldorf, Germany. doi: 10.1115/GT2014-26823

Miao, X., Zhang, Q., Wang, L. , Jiang, H. & Qi, H. (2015). Application of riblets on turbine blade endwall secondary flow control. Journal of Propulsion and Power, 31(6), pp. 1578-1585. doi: 10.2514/1.B35549

Mikulich, V. & Brücker, C. (2014). Cavitation by spall fracture of solid walls in liquids. Experiments in Fluids, 55, 1785.. doi: 10.1007/s00348-014-1785-6

Mikulich, V. & Brücker, C. (2013). Flow and motion behavior of particle suspensions in shear flow over a rough surface. WIT Transactions on Engineering Sciences, 79, pp. 263-272. doi: 10.2495/MPF130221

Mintz, B., Kang, S. & Qaban, A. ORCID: 0000-0003-2982-8429 (2021). The influence of grain size and precipitation and a boron addition on the hot ductility of a high Al, V containing TWIP steels. Materials Science and Technology, 37(12), doi: 10.1080/02670836.2021.1975876

Mintz, B. & Qaban, A. ORCID: 0000-0003-2982-8429 (2021). Understanding the high temperature side of the hot ductility curve for steels. Materials Science and Technology, 37(3), pp. 237-249. doi: 10.1080/02670836.2021.1882047

Mintz, B., Qaban, A. ORCID: 0000-0003-2982-8429, Bendke, P. & Naher, S. ORCID: 0000-0003-2047-5807 (2019). The influence of a high aluminium addition on the strength and impact behaviour of hot-rolled Nb containing steels. Materials Science and Technology, doi: 10.1080/02670836.2019.1701272

Mirshahi, M. (2020). In-nozzle flow spray characteristics in gasoline multi-hole injectors. (Unpublished Doctoral thesis, City, University of London)

Mirshahi, M., Yan, Y. & Nouri, J. M. (2015). Influence of cavitation on near nozzle exit spray. Journal of Physics: Conference Series,, 656(1), 012093. doi: 10.1088/1742-6596/656/1/012093

Mishra, R., Goel, S. & Yazdani Nezhad, H. ORCID: 0000-0003-0832-3579 (2021). Computational prediction of electrical and thermal properties of graphene and BaTiO3 reinforced epoxy nanocomposites. Biomaterials and polymers horizon, 1(1), pp. 1-14.

Mithun, M-G, Koukouvinis, P. ORCID: 0000-0002-3945-3707 & Gavaises, M. ORCID: 0000-0003-0874-8534 (2018). Numerical simulation of cavitation and atomization using a fully compressible three-phase model. Physical Review Fluids, 3(6), 064304. doi: 10.1103/PhysRevFluids.3.064304

Mitroglou, N. & Gavaises, M. (2013). Mapping of cavitating flow regimes in injectors for medium-/heavy-duty diesel engines. International Journal of Engine Research, 14(6), pp. 590-605. doi: 10.1177/1468087413500491

Mitroglou, N., Gavaises, M. & Arcoumanis, D. (2012). Spray stability from VCO and a new diesel nozzle design concept. In: Fuel Systems for IC Engines. (pp. 279-290). UK: Elsevier. doi: 10.1533/9780857096043

Mitroglou, N., Gavaises, M., Nouri, J. M. & Arcoumanis, C. (2011). Cavitation Inside Enlarged And Real-Size Fully Transparent Injector Nozzles And Its Effect On Near Nozzle Spray Formation. Paper presented at the Droplet Impact Phenomena and Spray Investigations Workshop 2011, 27 May 2011, Bergamo, Italy.

Mitroglou, N., Lorenzi, M., Santini, M. & Gavaises, M. (2016). Application of X-ray micro-computed tomography on high-speed cavitating diesel fuel flows. Experiments in Fluids, 57(11), p. 175. doi: 10.1007/s00348-016-2256-z

Mitroglou, N., Lorenzi, M., Santini, M. , Gavaises, M. & Assanis, D. (2015). Application of cone-beam micro-CT on high-speed Diesel flows and quantitative cavitation measurements. Journal of Physics: Conference Series, 656(1), 012094. doi: 10.1088/1742-6596/656/1/012094

Mitroglou, N., McLorn, M., Gavaises, M. , Soteriou, C. & Winterbourne, M. (2014). Instantaneous and ensemble average cavitation structures in Diesel micro-channel flow orifices. Fuel, 116, pp. 736-742. doi: 10.1016/j.fuel.2013.08.060

Mitroglou, N., Nouri, J. M. & Arcoumanis, C. (2009). Spray structure from double fuel injection in multihole injectors for gasoline direct-injection engines. Atomization and Sprays, 19(6), pp. 529-545. doi: 10.1615/AtomizSpr.v19.i6.30

Mitroglou, N., Nouri, J. M., Gavaises, M. & Arcoumanis, C. (2006). Spray characteristics of a multi-hole injector for direct-injection gasoline engines. International Journal of Engine Research, 7(3), pp. 255-270. doi: 10.1243/146808705X62922

Mitroglou, N., Stamboliyski, V., Karathanassis, I. K. , Nikas, K.S. & Gavaises, M. (2017). Cloud cavitation vortex shedding inside an injector nozzle. Experimental Thermal and Fluid Science, 84, pp. 179-189. doi: 10.1016/j.expthermflusci.2017.02.011

Mojaddam, M. & Pullen, K. R. ORCID: 0000-0001-8501-9226 (2019). Optimization of a Centrifugal Compressor Using the Design of Experiment Technique. Applied Sciences, 9(2), 291.. doi: 10.3390/app9020291

Monti, A (2019). High-fidelity simulations of fully submerged, rigid canopy flows. (Unpublished Doctoral thesis, City, University of London)

Monti, A., Omidyeganeh, M. ORCID: 0000-0002-4140-2810, Eckhardt, B. & Pinelli, A. ORCID: 0000-0001-5564-9032 (2020). On the genesis of different regimes in canopy flows: a numerical investigation. Journal of Fluid Mechanics, 891, A9. doi: 10.1017/jfm.2020.155

Monti, A., Omidyeganeh, M. ORCID: 0000-0002-4140-2810 & Pinelli, A. ORCID: 0000-0001-5564-9032 (2019). Large-eddy simulation of an open-channel flow bounded by a semi-dense rigid filamentous canopy: Scaling and flow structure. Physics of Fluids, 31(6), 065108.. doi: 10.1063/1.5095770

Moreno-Ramirez, C. & Tomas-Rodriguez, M. (2014). Non linear optimization of a sport motorcycle's suspension interconnection system. Paper presented at the 2014 UKACC International Conference on Control (CONTROL), 09-07-2014 - 11-07-2014, Loughbrough, UK.

Moreno-Ramirez, C., Tomas-Rodriguez, M. ORCID: 0000-0001-9630-9579 & Evangelou, S. A. (2019). Effects of interconnected suspension systems on the dynamics of sport motorcycles. Paper presented at the Bicycle and Motorcycle Dynamics 2019 Symposium on the Dynamics and Control of Single Track Vehicles, 09 - 11 September 2019, University of Padova, Italy.

Mujic, E., Kovacevic, A., Stosic, N. & Smith, I. K. (2011). Noise generation and suppression in twin screw compressors. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 225(2), pp. 127-148. doi: 10.1177/1464419311403875

Mujic, E., Kovacevic, A., Stosic, N. & Smith, I. K. (2008). The influence of port shape on gas pulsations in a screw compressor discharge chamber. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 222(4), pp. 211-223. doi: 10.1243/09544089JPME205

Mujic, E., Stosic, N., Kovacevic, A. & Smith, I. K. (2016). Noise Control by Suppression of Gas Pulsation in Screw Compressors. In: Ahmed, N. (Ed.), Advances in Noise Analysis, Mitigation and Control. . InTech. doi: 10.5772/64795

Murali-Girija, M. (2020). Numerical simulation of cavitation in the presence of non-condensable gas using a three-phase model. (Unpublished Doctoral thesis, City, University of London)

Murali-Girija, M., Koukouvinis, F. ORCID: 0000-0002-3945-3707, Karathanassis, I. K. ORCID: 0000-0001-9025-2866 & Gavaises, M. ORCID: 0000-0003-0874-8534 (2019). Numerical simulation of three-phase flow in an external gear pump using immersed boundary approach. Applied Mathematical Modelling, 72, pp. 682-699. doi: 10.1016/j.apm.2019.03.022

Muthuramalingam, M. (2020). Investigation of biomimetic fish scale arrays and leading-edge serrations on base flow modification for transition delay. (Unpublished Doctoral thesis, City, University of London)

Muthuramalingam, M. & Bruecker, C. ORCID: 0000-0001-5834-3020 (2019). Seal and Sea lion Whiskers Detect Slips of Vortices Similar as Rats Sense Textures. Scientific Reports, 9, p. 12808. doi: 10.1038/s41598-019-49243-5

Muthuramalingam, M., Puckert, D. K., Rist, U. & Bruecker, C. ORCID: 0000-0001-5834-3020 (2020). Transition Delay Using Biomimetic Fish Scale Arrays. Scientific Reports, 10(1), 14534.. doi: 10.1038/s41598-020-71434-8

Muthuramalingam, M., Talboys, E. ORCID: 0000-0001-8993-0180, Wagner, H. & Bruecker, C. ORCID: 0000-0001-5834-3020 (2020). Flow turning effect and laminar control by the 3D curvature of leading edge serrations from owl wing. Bioinspiration and Biomimetics, doi: 10.1088/1748-3190/abc6b4

Muthuramalingam, M., Villemin, L. S. & Bruecker, C. ORCID: 0000-0001-5834-3020 (2019). Streak formation in flow over biomimetic fish scale arrays. The Journal of Experimental Biology, doi: 10.1242/jeb.205963

N

Naher, S., Ahmad, A.H. & Brabazon, D. (2014). Direct thermal method of aluminium 7075. Advanced Materials Research, 939, pp. 400-408. doi: 10.4028/www.scientific.net/AMR.939.400

Naher, S., Orpen, D., Brabazon, D. , Poulsen, C.R. & Morshed, M.M. (2010). Effect of micro-channel geometry on fluid flow and mixing. Simulation Modelling Practice and Theory, 19(4), pp. 1088-1095. doi: 10.1016/j.simpat.2010.12.008

Nakka, R., Harursampath, D., Pathan, M. V. & Ponnusami, S. A. ORCID: 0000-0002-2143-8971 (2022). A computationally efficient approach for generating RVEs of various inclusion/fiber shapes. Composite Structures, 291, 115560. doi: 10.1016/j.compstruct.2022.115560

Narayana, K. J., Burela, R. G., Ponnusami, S. A. ORCID: 0000-0002-2143-8971 & Harursampath, D. (2020). Geometric nonlinear analysis of composite stiffened panels using variational asymptotic method. AIAA Journal, 58(9), doi: 10.2514/1.J058963

Naseri, H., Koukouvinis, P. & Gavaises, M. (2015). Evaluation of Turbulence Models Performance in Predicting Incipient Cavitation in an Enlarged Step-Nozzle. Journal of Physics: Conference Series, 656(1), 012095. doi: 10.1088/1742-6596/656/1/012095

Naseri, H., Koukouvinis, P., Malgarinos, I. & Gavaises, M. ORCID: 0000-0003-0874-8534 (2018). On viscoelastic cavitating flows: A numerical study. Physics of Fluids, 30(3), 033102. doi: 10.1063/1.5011978

Naseri, H., Trickett, K., Mitroglou, N. ORCID: 0000-0002-2955-8716 , Karathanassis, I. K. ORCID: 0000-0001-9025-2866, Koukouvinis, P. ORCID: 0000-0002-3945-3707, Gavaises, M. ORCID: 0000-0003-0874-8534, Barbour, R., Diamond, D., Rogers, S. E., Santini, M. & Wang, J. (2018). Turbulence and Cavitation Suppression by Quaternary Ammonium Salt Additives. Scientific Reports, 8, 7636.. doi: 10.1038/s41598-018-25980-x

Naseri, Homa (2019). Modelling of nozzle cavitation in newtonian and viscoelastic fluids. (Unpublished Doctoral thesis, City, University of London)

Nazeer, Y. H. (2020). Numerical modelling of in-nozzle flow transient effects and fuel atomization characteristics of an industrial atomizer. (Unpublished Doctoral thesis, City, University of London)

Nazeer, Y. H., Ehmann, M, Sami, M & Gavaises, E. ORCID: 0000-0003-0874-8534 (2021). Atomization Mechanism of Internally Mixing Twin-Fluid Y-Jet Atomizer. Journal of Energy Engineering, 147(1), doi: 10.1061/(ASCE)EY.1943-7897.0000723

Nazeer, Y. H., Ehmann, M., Koukouvinis, P. ORCID: 0000-0002-3945-3707 & Gavaises, M. ORCID: 0000-0003-0874-8534 (2019). The Influence of geometrical and operational parameters on internal flow characteristics of Internally Mixing Twin-Fluid Y-Jet Atomizers. Atomization and Sprays, doi: 10.1615/atomizspr.2019030944

Nicolas Marichal, G., Tomas-Rodriguez, M., Hernandez, A. , Castillo-Rivera, S. & Campoy, P. (2014). Vibration reduction for vision systems on board unmanned aerial vehicles using a neuro-fuzzy controller. Journal of Vibration and Control, 20(15), pp. 2243-2253. doi: 10.1177/1077546313479632

Nikolopoulos, N., Strotos, G., Nikas, K-S. , Theodorakakos, A., Gavaises, M., Marengo, M. & Cossali, G. E. (2010). Single droplet impacts onto deposited drops. Numerical analysis and comparison. Atomization and Sprays, 20(11), pp. 935-953. doi: 10.1615/AtomizSpr.v20.i11.20

Nikolopoulos, N., Theodorakakos, A. & Bergeles, G. (2009). Off-centre binary collision of droplets: A numerical investigation. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 52(19-20), pp. 4160-4174. doi: 10.1016/j.ijheatmasstransfer.2009.04.011

Nokhandan, M. M., Piomelli, U. & Omidyeganeh, M. ORCID: 0000-0002-4140-2810 (2018). Large-eddy and wall-modelled simulations of turbulent flow over two-dimensional river dunes. Physics and Chemistry of the Earth, doi: 10.1016/j.pce.2018.11.004

Nouri, J. M. (2015). Influence of cavitation on near nozzle exit spray. Paper presented at the CAV 2015. 9th Int. Symp. On Cavitation, 6-10 Dec 2015, Lausanne, Switzerland.

Nouri, J. M. ORCID: 0000-0001-8610-3737, Guerrato, D. & Stosic, N. (2019). Turbulent Flow Measurements near the Discharge Port of a Screw Compressor. Flow, Turbulence and Combustion, doi: 10.1007/s10494-019-00080-6

Nouri, J. M., Guerrato, D., Stosic, N. & Arcoumanis, C. (2008). Axial Flow Characteristics within a Screw Compressor. HVAC&R Research, 14(2), pp. 259-274. doi: 10.1080/10789669.2008.10391007

Nouri, J. M. & Hockey, R. (2008). Flow characteristics of Newtonian and non-Newtonian fluids in a vessel stirred by a 60° pitched blade impeller. The International Journal of Multiphysics, 2(1), pp. 83-105. doi: 10.1260/175095408784300261

Nouri, J. M., Mackenzie, S., Gaskell, C. & Dhunput, A. (2012). Effect of viscosity and temperature on in-nozzle flow and cavitation in a multi-hole injector. Paper presented at the Fuel Systems for IC Engines, 14-3-2012 - 15-3-2012, IMechE, London, England.

Nouri, J. M., Mackenzie, S., Gaskell, C. & Dhunput, A. (2012). Effect of viscosity, temperature and nozzle length-to-diameter ratio on internal flow and cavitation in a multi-hole injector. In: Fuel Systems for IC Engines. (pp. 265-278). Cambridge, UK: Woodhead Publishing. doi: 10.1533/9780857096043

Nouri, J. M., Marchi, A., Yan, Y. & Arcoumanis, C. (2007). Internal flow and spray characteristics of a pintle-type outward opening piezo-injector. Transactions Journal of Engines, 116(6), pp. 915-934. doi: 10.4271/2007-01-1406

Nouri, J. M., Mitroglou, N., Yan, Y. & Arcoumanis, D. (2007). Internal flow and cavitation in a multi-hole injector for gasoline direct-injection engines. SAE Technical Papers, pp. 2007-01. doi: 10.4271/2007-01-1405

Nouri, J. M. ORCID: 0000-0001-8610-3737, Stosic, N. & Guerrato, D. (2019). Investigation of turbulent flow characteristics within screw compressor. In: 4th International Conference on Multi-scale Computational Methods for Solids and Fluids. (pp. 193-196). Bosnia and Herzegovina: Faculty of Civil Engineering, University of Sarajevo. ISBN 978-9958-638-57-2

Nouri, J. M. ORCID: 0000-0001-8610-3737, Vasilakos, I. & Yan, Y. ORCID: 0000-0003-1124-4724 (2021). Cavitation between cylinder-liner and piston-ring in a new designed optical IC engine. International Journal of Engine Research, doi: 10.1177/14680874211008007

Nouri, J. M. ORCID: 0000-0001-8610-3737, Vasilakos, I., Yan, Y. ORCID: 0000-0003-1124-4724 & Reyes-Aldasoro, C. C. ORCID: 0000-0002-9466-2018 (2019). Effect of Viscosity and Speed on Oil Cavitation Development in a Single Piston-Ring Lubricant Assembly. Lubricants, 7(10), 88.. doi: 10.3390/lubricants7100088

Nucara, P. & Sayma, A. I. (2011). Effects of using Hydrogen-rich Syngas in industrial gas turbines while maintaining fuel flexibility on compressor design. Paper presented at the ASME Turbo Expo 2011, 06-06-2011 - 10-06-2011, Vancouver, Canada. doi: 10.1115/GT2011-45589

Nucara, P. & Sayma, A. I. (2012). Effects of using Hydrogen-rich syngas in industrial gas turbines while maintaining fuel flexibility on a multistage axial compressor design. Paper presented at the ASME Turbo Expo 2012: Turbine Technical Conference and Exposition, 11-06-2012 - 15-06-2012, Copenhagen, Denmark.

Nykteri, G. (2021). Development of a multiscale two-fluid approach with application to droplet dynamics. (Unpublished Doctoral thesis, City, University of London)

Nykteri, G. ORCID: 0000-0002-8144-6420 & Gavaises, M. ORCID: 0000-0003-0874-8534 (2021). Droplet aerobreakup under the shear-induced entrainment regime using a multiscale two-fluid approach. Physical Review Fluids, 6(8), 084304. doi: 10.1103/physrevfluids.6.084304

Nykteri, G., Koukouvinis, P. ORCID: 0000-0002-3945-3707, Avila, S. R. G. , Ohl, C-D. & Gavaises, M. ORCID: 0000-0003-0874-8534 (2020). A Σ-ϒ two-fluid model with dynamic local topology detection: Application to high-speed droplet impact. Journal of Computational Physics, 408, 109225. doi: 10.1016/j.jcp.2019.109225

Nykteri, G., Koukouvinis, P. ORCID: 0000-0002-3945-3707 & Gavaises, M. ORCID: 0000-0003-0874-8534 (2018). A Compressible Σ-Υ Two-Fluid Atomization Model with Dynamic Interface Sharpening based on Flow Topology Detection. Paper presented at the 14th International Conference on Liquid Atomization and Spray Systems, 22 - 26 July 2018, Chicago, Illinois.

Nykteri, G., Koukouvinis, P. ORCID: 0000-0002-3945-3707, Gonzalez Avila, S. R. , Ohl, C-D. & Gavaises, M. ORCID: 0000-0003-0874-8534 (2019). Numerical investigation of high-speed droplet impact using a multiscale two-fluid approach. Paper presented at the 29th European Conference on Liquid Atomization and Spray Systems, 2-4 Sep 2019, Paris, France.

O

Olabi, A. G., Mahmoud, M., Soudan, B. , Wilberforce, T. & Ramadan, M. (2020). Geothermal based hybrid energy systems, toward eco-friendly energy approaches. Renewable Energy, 147, pp. 2003-2012. doi: 10.1016/j.renene.2019.09.140

Omidyeganeh, M. & Piomelli, U. (2013). Large-eddy simulation of three-dimensional dunes in a steady, unidirectional flow. Part 1. Turbulence statistics. Journal of Fluid Mechanics, 721, pp. 454-483. doi: 10.1017/jfm.2013.36

Omidyeganeh, M. & Piomelli, U. (2013). Large-eddy simulation of three-dimensional dunes in a steady, unidirectional flow. Part 2. Flow structures. Journal of Fluid Mechanics, 734, pp. 509-534. doi: 10.1017/jfm.2013.499

Omidyeganeh, M. & Piomelli, U. (2011). Large-eddy simulation of two-dimensional dunes in a steady, unidirectional flow. Journal of Turbulence, 12(42), pp. 1-31. doi: 10.1080/14685248.2011.609820

Omidyeganeh, M., Piomelli, U., Christensen, K.T. & Best, J.L. (2013). Large eddy simulation of interacting barchan dunes in a steady, unidirectional flow. JOURNAL OF GEOPHYSICAL RESEARCH-EARTH SURFACE, 118(4), doi: 10.1002/jgrf.20149

Ostmann, S., Chaves, H. & Bruecker, C. (2017). Path instabilities of light particles rising in a liquid with background rotation. Journal of Fluids and Structures, 70, pp. 403-416. doi: 10.1016/j.jfluidstructs.2017.02.007

Ous, T. & Arcoumanis, C. (2013). Degradation aspects of water formation and transport in Proton Exchange Membrane Fuel Cell: A review. Journal of Power Sources, 240, pp. 558-582. doi: 10.1016/j.jpowsour.2013.04.044

Ous, T. & Arcoumanis, C. (2007). Effect of compressive force on the performance of a proton exchange membrane fuel cell. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 221(9), pp. 1067-1074. doi: 10.1243/09544062JMES654

Ous, T. & Arcoumanis, C. (2008). Visualisation of water accumulation in the flow channels of PEMFC under various operating conditions. Journal of Power Sources, 187(1), pp. 182-189. doi: 10.1016/j.jpowsour.2008.10.072

Ous, T. & Arcoumanis, C. (2007). Visualisation of water droplets during the operation of PEM fuel cells. Journal of Power Sources, 173(1), pp. 137-148. doi: 10.1016/j.jpowsour.2007.04.075

Ous, T. & Arcoumanis, C. (2009). The formation of water droplets in an air-breathing PEMFC. International Journal of Hydrogen Energy, 34(8), pp. 3476-3487. doi: 10.1016/j.ijhydene.2009.02.037

Ous, T., Mujic, E. & Stosic, N. (2012). Experimental investigation on water injected twin screw compressor for fuel cell humidification. Proceedings of the Institution of Mechanical Engineers, Part C, Journal of Mechanical Engineering Science, 226(2), pp. 2925-2932. doi: 10.1177/0954406212438323

P

Pacholak, S. & Brücker, C. (2017). Size does matter: The use of fish motion for improving human swimming simulations. Applied Mathematical Modelling, 46, doi: 10.1016/j.apm.2017.01.080

Pacholak, S., Hochstein, S., Rudert, A. & Brücker, C. (2014). Unsteady flow phenomena in human undulatory swimming: a numerical approach. Sports Biomechanics, 13(2), doi: 10.1080/14763141.2014.893609

Pagani, A., Boscolo, M., Banerjee, J. R. & Carrera, E. (2013). Exact dynamic stiffness elements based on one-dimensional higher-order theories for free vibration analysis of solid and thin-walled structures. Journal of Sound and Vibration, 332(23), pp. 6104-6127. doi: 10.1016/j.jsv.2013.06.023

Panagopoulos, I., Atkin, C.J. & Sikora, I. (2017). Developing a performance indicators lean-sigma framework for measuring aviation system’s safety performance. Transportation Research Procedia, 22, pp. 35-44. doi: 10.1016/j.trpro.2017.03.005

Panagopoulos, I., Atkin, C.J. & Sikora, I. (2016). Lean Six-Sigma in Aviation Safety: An implementation guide for measuring aviation system’s safety performance. Journal of Safety Studies, 2(2), doi: 10.5296/jss.v2i2.10438

Papadakis, G. & Manolesos, M. ORCID: 0000-0002-5506-6061 (2020). The flow past a flatback airfoil with flow control devices: Benchmarking numerical simulations against wind tunnel data. Wind Energy Science, 5(3), pp. 911-927. doi: 10.5194/wes-5-911-2020

Papadakis, G., Manolesos, M. ORCID: 0000-0002-5506-6061, Diakakis, K. & Riziotis, V. A. (2020). DES vs RANS: The flatback airfoil case. Journal of Physics: Conference Series, 1618(5), 052062. doi: 10.1088/1742-6596/1618/5/052062

Papadopoulos, K., Gerotziafas, G. T. & Gavaises, M. ORCID: 0000-0003-0874-8534 (2017). Modelling of thrombin generation under flow in realistic left anterior descending geometries. Medical Engineering & Physics, 50, pp. 50-58. doi: 10.1016/j.medengphy.2017.10.001

Papadopoulos, Konstantinos, Gavaises, M. & Atkin, C. (2014). A simplified mathematical model for thrombin generation. Medical Engineering and Physics, 36(2), pp. 196-204. doi: 10.1016/j.medengphy.2013.10.012

Papadopoulos, Konstantinos, Gavaises, M., Pantos, I. , Katritsis, D. G. & Mitroglou, N. (2016). Derivation of flow related risk indices for stenosed left anterior descending coronary arteries with the use of computer simulations. Medical Engineering & Physics, 38(9), pp. 929-939. doi: 10.1016/j.medengphy.2016.05.016

Papkov, S. O. & Banerjee, J. R. (2021). Free vibration of thick rectangular orthotropic plates with clamped edges- using asymptotic analysis of infinite systems. Journal of Sound and Vibration, 508, 116209. doi: 10.1016/j.jsv.2021.116209

Papkov, S.O. & Banerjee, J. R. (2019). Dynamic stiffness formulation and free vibration analysis of specially orthotropic Mindlin plates with arbitrary boundary conditions. Journal of Sound and Vibration, 458, pp. 522-543. doi: 10.1016/j.jsv.2019.06.028

Papoulias, D. & Gavaises, M. (2015). Modelling of single bubble-dynamics and thermal effects. Journal of Physics: Conference Series, 656(1), 012098. doi: 10.1088/1742-6596/656/1/012098

Papoutsakis, A. ORCID: 0000-0002-5449-5921, Danaila, I., Luddens, F. & Gavaises, M. (2022). Droplet nuclei caustic formations in exhaled vortex rings. Scientific Reports, 12(1), 3892. doi: 10.1038/s41598-022-07717-z

Papoutsakis, A. ORCID: 0000-0002-5449-5921 & Gavaises, M. ORCID: 0000-0003-0874-8534 (2020). A model for the investigation of the second-order structure of caustic formations in dispersed flows. Journal of Fluid Mechanics, 892, A4. doi: 10.1017/jfm.2020.176

Papoutsakis, A. ORCID: 0000-0002-5449-5921, Koukouvinis, P. ORCID: 0000-0002-3945-3707 & Gavaises, M. ORCID: 0000-0003-0874-8534 (2020). Solution of cavitating compressible flows using Discontinuous Galerkin discretisation. Journal of Computational Physics, 410, p. 109377. doi: 10.1016/j.jcp.2020.109377

Parra, J., Cattell, R., Etemad, S. & Pullen, K. R. (2015). Performance Measurements of a Low Specific Speed TurboClaw (R) Compressor. IOP Conference Series: Materials Science and Engineering, 90(1), 012050.. doi: 10.1088/1757-899X/90/1/012050

Pascu, M., Heiyanthuduwage, M. A., Mounoury, S. , Cooke, G.M.E. & Kovacevic, A. (2013). A study on the influence of the suction arrangement on the performance of twin screw compressors. In: ASME 2013 International Mechanical Engineering Congress and Exposition. Fluids Engineering Systems and Technologies, 7 A. . American Society of Mechanical Engineers (ASME). doi: 10.1115/IMECE2013-62391

Patel, B., Kovacevic, A. ORCID: 0000-0002-8732-2242, Charogiannis, A. , Alam, M. N. & Schuette, M. (2021). The use of laser-induced fluorescence to measure temperature in the leakage gaps of oil-free positive displacement rotary machines. Measurement, 185, 110057. doi: 10.1016/j.measurement.2021.110057

Patel, B., Kovacevic, A. ORCID: 0000-0002-8732-2242 & Krupa, A. (2021). On Measuring Velocity and Temperature in Leakage Flows of Oil Free Rotary Positive Displacement Machines. Paper presented at the International Conference “New Technologies, Development and Applications”, 24-26 Jun 2021, Sarajevo, Bosnia and Herzegovina. doi: 10.1007/978-3-030-75275-0_84

Pathan, M. V., Erice, B., Ponnusami, S. A. & Petrinic, N. (2018). Experimental characterisation of rate-dependent compression behaviour of fibre reinforced composites. EPJ Web of Conferences, 183, 02053.. doi: 10.1051/epjconf/201818302053

Pathan, M. V., Ponnusami, S. A. ORCID: 0000-0002-2143-8971, Pathan, J. , Pitisongsawat, R., Erice, B., Petrinic, N. & Tagarielli, V. L. (2019). Predictions of the mechanical properties of unidirectional fibre composites by supervised machine learning. Scientific Reports, 9(1), 13964.. doi: 10.1038/s41598-019-50144-w

Pearson, C., Hawi, S., Lira, C. , Goel, S. & Yazdani Nezhad, H. ORCID: 0000-0003-0832-3579 (2022). Magnetic field assisted 3D printing of short carbon fibre-reinforced polymer composites. Paper presented at the 2nd International Conference Innovative Technologies in Mechanical Engineering, 17-18 De 2021, Ghaziabad, India. doi: 10.1016/j.matpr.2022.04.597

Pelletier, J. D., Sherman, D. J., Ellis, J. T. , Farrell, E. J., Jackson, N. L., Li, B. Y., Nordstrom, K. F., Maia, L. P. & Omidyeganeh, M. (2015). Dynamics of sediment storage and release on aeolian dune slip faces: A field study in Jericoacoara, Brazil. Journal of Geophysical Research: Earth Surface, 120(9), pp. 1911-1934. doi: 10.1002/2015JF003636

Pinelli, A., Naqavi, I. Z., Piomelli, U. & Favier, J. (2010). Immersed Boundary Method for Generalised Finite Volume and Finite Difference Navier-Stokes Solvers. Journal of Computational Physics, 229(24), pp. 9073-9091. doi: 10.1016/j.jcp.2010.08.021

Pinelli, A., Omidyeganeh, M., Brücker, C. , Revell, A., Sarkar, A. & Alinovi, E. (2016). The PELskin project: part IV—control of bluff body wakes using hairy filaments. Meccanica, doi: 10.1007/s11012-016-0513-0

Pinelli, A., Uhlmann, M., Sekimoto, A. & Kawahara, G. (2010). Reynolds number dependence of mean flow structure in square duct turbulence. Journal of Fluid Mechanics, 644, pp. 107-122. doi: 10.1017/S0022112009992242

Placidi, M., van Bokhorst, E. & Atkin, C. J. (2016). On the effect of discrete roughness on the growth of crossflow instability in very low turbulence environment. In: 8th AIAA Flow Control Conference. . Reston, VA, United States: American Institute of Aeronautics and Astronautics. doi: 10.2514/6.2016-3470

Ponitz, B., Sastuba, M. & Bruecker, C. (2016). 4D visualization study of a vortex ring life cycle using modal analyses. Journal of Visualization, 19(2), pp. 237-259. doi: 10.1007/s12650-015-0314-x

Ponnusami, S. A. ORCID: 0000-0002-2143-8971, Cui, H., Erice, B. , Pathan, M. V. & Petrinic, N. (2018). A Wedge-DCB Test Methodology to Characterise High Rate Mode-I Interlaminar Fracture Properties of Fibre Composites. EPJ Web of Conferences, 183, 02052.. doi: 10.1051/epjconf/201818302052

Ponnusami, S. A. ORCID: 0000-0002-2143-8971, Gupta, M. & Harursampath, D. (2019). Asymptotic Modeling of Nonlinear Bending and Buckling Behavior of Carbon Nanotubes. AIAA Journal, 57(10), pp. 4132-4140. doi: 10.2514/1.j057564

Ponnusami, S. A. ORCID: 0000-0002-2143-8971, Krishnasamy, J., Turteltaub, S. & van der Zwaag, S. (2022). Elucidating the effect of cohesive zone length in fracture simulations of particulate composites. Engineering Fracture Mechanics, 268, 108431. doi: 10.1016/j.engfracmech.2022.108431

Ponnusami, S. A. ORCID: 0000-0002-2143-8971, Krishnasamy, J., Turteltaub, S. & van der Zwaag, S. (2018). A cohesive-zone crack healing model for self-healing materials. International Journal of Solids and Structures, 134, pp. 249-263. doi: 10.1016/j.ijsolstr.2017.11.004

Ponnusami, S. A. ORCID: 0000-0002-2143-8971, Krishnasamy, J., Turteltaub, S. & van der Zwaag, S. (2019). A micromechanical fracture analysis to investigate the effect of healing particles on the overall mechanical response of a self-healing particulate composite. Fatigue and Fracture of Engineering Materials and Structures, 42(2), pp. 533-545. doi: 10.1111/ffe.12929

Ponnusami, S. A., Turteltaub, S. & van der Zwaag, S. (2015). Cohesive-zone modelling of crack nucleation and propagation in particulate composites. Engineering Fracture Mechanics, 149, pp. 170-190. doi: 10.1016/j.engfracmech.2015.09.050

Pullen, K. R. ORCID: 0000-0001-8501-9226 (2019). The Status and Future of Flywheel Energy Storage. Joule, doi: 10.1016/j.joule.2019.04.006

Pullen, K. R. & Dhand, A. (2014). Characterization of Flywheel Energy Storage System for Hybrid Vehicles. Paper presented at the SAE 2014 World Congress & Exhibition, 08-04-2014 - 10-04-2014, Detroit, USA. doi: 10.4271/2014-01-1796

Pullen, K. R. & Dhand, A. (2014). Mechanical and electrical flywheel hybrid technology to store energy in vehicles. In: Alternative Fuels and Advanced Vehicle Technologies for Improved Environmental Performance. (pp. 476-504). Woodhead Publishing. doi: 10.1533/9780857097422.2.476

Pullen, K. R., Grigorchenkov, I. & Johnson, D. (2012). Evaluation of mobile and stationary applications of energy storage for DC railways and rapid transit. Paper presented at the RRUKA Annual Conference, 07-11-2012, Royal Society, London, UK.

Pullen, K. R. ORCID: 0000-0001-8501-9226, Read, M. G. ORCID: 0000-0002-7753-2457, Sellick, R. , Fenocchi, A. & Etemad, S. (2016). Efficiency Benefits from the Deployment of a Novel Flywheel Solution for Non-Electrified Lines. International Journal of Railway Technology, 5(4), pp. 79-100. doi: 10.4203/ijrt.5.4.4

Q

Qaban, A. (2019). The effect of alloying composition and cooling rate on the hot ductility of TWIP steel and mechanical properties of hot rolled HSLA steel. (Unpublished Doctoral thesis, City, University of London)

Qaban, A., Mintz, B., Kang, S. E. & Naher, S. (2017). Hot ductility of high Al TWIP steels containing Nb and Nb-V. Materials Science and Technology, 33(14), pp. 1645-1656. doi: 10.1080/02670836.2017.1309097

Qaban, A., Mintz, B. & Naher, S. (2017). Hot rolled high Al containing steels as a replacement for the control rolled high strength low alloy (HSLA) steels. AIP Conference Proceedings, 1896(1), 010001.. doi: 10.1063/1.5008156

Qaban, A. ORCID: 0000-0003-2982-8429, Mohmed, T., Quazi, M. M. & Naher, S. ORCID: 0000-0003-2047-5807 (2020). The effect of Al and Nb contents, cooling rate and rolling condition on the microstructure and corrosion behaviour of HSLA steel. Materials Today Communications, 101362.. doi: 10.1016/j.mtcomm.2020.101362

Qaban, A. ORCID: 0000-0003-2982-8429 & Naher, S. ORCID: 0000-0003-2047-5807 (2019). Evaluation of Toughness of High Strength Low Alloy (HSLA) Steels as a Function of Carbon Content. International Journal of Mechanical and Production Engineering (IJMPE), 7(5), pp. 53-56.

Qaban, A. & Naher, S. ORCID: 0000-0003-2047-5807 (2018). Influence of Al content on the corrosion resistance of micro-alloyed hot rolled steel as a function of grain size. AIP Conference Proceedings, 1960, 040017.. doi: 10.1063/1.5034871

Qaban, A. ORCID: 0000-0003-2982-8429 & Naher, S. ORCID: 0000-0003-2047-5807 (2019). Investigation of corrosion resistance of high-strength low-alloy (HSLA) steel in fresh and salt water for pipeline application. AIP Conference Proceedings, 2146, 020021.. doi: 10.1063/1.5123708

Qian, W., Rosic, B., Zhang, Q. & Khanal, B. (2016). Influence of fluid temperature gradient on the flow within the shaft gap of a PLR pump. Heat and Mass Transfer/Waerme- und Stoffuebertragung, 52(3), pp. 469-481. doi: 10.1007/s00231-015-1570-y

R

Ramirez, C. M., Tomas-Rodriguez, M. & Evangelou, S. A. (2012). Dynamical analysis of a duolever suspension system. In: Proceedings of the 2012 UKACC International Conference on Control, CONTROL 2012. (pp. 1106-1111). IEEE. doi: 10.1109/CONTROL.2012.6334787

Rampidis, I. M., Giannakopoulos, D. & Bergeles, G. (2010). Insight into the Greek electric sector and energy planning with mature technologies and fuel diversification. Energy Policy, 38(8), pp. 4076-4088. doi: 10.1016/j.enpol.2010.03.034

Rane, S, Kovačević, A & Stošić, N (2019). Grid generation for CFD analysis and design of a variety of twin screw machines. Designs, 3(2), doi: 10.3390/designs3020030

Rane, S. (2015). Grid Generation and CFD Analysis of Variable Geometry Screw Machines. (Unpublished Doctoral thesis, City University London)

Rane, S., Kovacevic, A., Stosic, N. & Kethidi, M. (2013). CFD grid generation and analysis of screw compressor with variable geometry rotors. In: 8th International Conference on Compressors and their Systems. (pp. 601-612). Cambridge: Woodhead Publishing.

Rane, S., Kovacevic, A., Stosic, N. & Kethidi, M. (2013). Grid deformation strategies for CFD analysis of screw compressors. International Journal of Refrigeration, 36(7), pp. 1883-1893. doi: 10.1016/j.ijrefrig.2013.04.008

Rane, S., Kovacevic, A. ORCID: 0000-0002-8732-2242, Stosic, N. ORCID: 0000-0001-8034-4046 & Smith, I. (2021). Analysis of real gas equation of state for CFD modelling of twin screw expanders with R245fa, R290, R1336mzz(Z) and R1233zd(E). International Journal of Refrigeration, 121, pp. 313-326. doi: 10.1016/j.ijrefrig.2020.10.022

Ransley, E., Yan, S. ORCID: 0000-0001-8968-6616, Brown, S. A. , Mai, T., Graham, D., Ma, Q., Musiedlak, P-H., Engsig-Karup, A. P., Eskilsson, C., Li, Q., Wang, J., Xie, Z., Venkatachalam, S., Stoesser, T., Zhuang, Y., Li, Q., Wan, D., Chen, G., Chen, H., Qian, L., Ma, Z., Mingham, C., Causon, D., Gatin, I., Jasak, H., Vukcevic, V., Downie, S., Higuera, P., Buldakov, E., Stagonas, D., Chen, Q., Zang, J. & Greaves, D. (2019). A Blind Comparative Study of Focused Wave Interactions with a Fixed FPSO-like Structure (CCP-WSI Blind Test Series 1). International Journal of Offshore and Polar Engineering, 29(2), pp. 113-127. doi: 10.17736/ijope.2019.jc748

Read, M. G. ORCID: 0000-0002-7753-2457 (2021). Basic design procedure for an internally geared screw compressor. IOP Conference Series: Materials Science and Engineering, 1180(1), ISSN 1757-8981 doi: 10.1088/1757-899x/1180/1/012055

Read, M. G., Smith, I. & Stosic, N. (2014). Effect of air temperature variation on the performance of wet vapour organic rankine cycle systems. Geothermal Resources Council Transactions, 38, pp. 705-712.

Read, M. G., Smith, I. K. & Stosic, N. (2015). Comparison of Organic Rankine Cycle Under Varying Conditions Using Turbine and Twin-Screw Expanders. Paper presented at the 3rd International Seminar on ORC Power Systems, 12-14 Oct 2015, Brussels, Belgium.

Read, M. G., Smith, I. K. & Stosic, N. (2016). Fundamental Investigation Of Whole-Life Power Plant Performance For Enhanced Geothermal Systems. In: 23rd International Compressor Engineering Conference at Purdue 2016. . Red Hook, NY: Curran Associates, Inc.

Read, M. G. ORCID: 0000-0002-7753-2457, Smith, I. K. ORCID: 0000-0003-1524-9880 & Stosic, N. (2019). Geometrical Comparison of Conventional and Gerotor-Type Positive Displacement Screw Machines. IOP Conference Series: Materials Science and Engineering, 604(1), 1-.. doi: 10.1088/1757-899X/604/1/011011

Read, M. G. ORCID: 0000-0002-7753-2457, Smith, I. K. & Stosic, N. ORCID: 0000-0001-8034-4046 (2020). Influence of rotor geometry on tip leakage and port flow areas in gerotor-type twin screw compressors. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, doi: 10.1177/0954408920962412

Read, M. G., Smith, I. K. & Stosic, N. (2017). Internally geared screw machines with ported end plates. IOP Conference Series: Materials Science and Engineering, 232(01205), doi: 10.1088/1757-899X/232/1/012058

Read, M. G., Smith, I. K. & Stosic, N. (2014). Multi-Variable Optimisation of Wet Vapour Organic Rankine Cycles with Twin-Screw Expanders. Paper presented at the 22nd International Compressor Engineering Conference, 14-17 Jul 2014, Perdue, France.

Read, M. G., Smith, I. K. & Stosic, N. (2017). Optimisation of power generation cycles using saturated liquid expansion to maximise heat recovery. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 231(1), pp. 57-69. doi: 10.1177/0954408916679202

Read, M. G., Smith, I. K. & Stosic, N. (2015). Optimisation of two-stage screw expanders for waste heat recovery applications. IOP Conference Series: Materials Science and Engineering, 90(1), 012058. doi: 10.1088/1757-899X/90/1/012058

Read, M. G., Smith, I. K., Stosic, N. & Kovacevic, A. (2016). Comparison of organic rankine cycle systems under varying conditions using turbine and twin-screw expanders. Energies, 9(8), 614.. doi: 10.3390/en9080614

Read, M. G., Smith, R. & Pullen, K. R. (2015). Optimisation of flywheel energy storage systems with geared transmission for hybrid vehicles. Paper presented at the UNSPECIFIED. doi: 10.1016/j.mechmachtheory.2014.11.001

Read, M. G. ORCID: 0000-0002-7753-2457, Stosic, N. & Smith, I. K. ORCID: 0000-0003-1524-9880 (2017). Geometrical aspects of novel internally geared screw machine. Paper presented at the Compressors 2017 - 9th International Conference on Compressors and Coolants, 6-9 Sept 2017, Bratislava, Slovakia. doi: 10.18462/iir.compr.2017.0241

Read, M. G. ORCID: 0000-0002-7753-2457, Stosic, N. & Smith, I. K. ORCID: 0000-0003-1524-9880 (2017). Operational characteristics of internally geared positive displacement screw machines. In: ASME 2017 International Mechanical Engineering Congress and Exposition. . USA: ASME. ISBN 9780791858417 doi: 10.1115/IMECE2017-70228

Read, M. G., Stosic, N. & Smith, I. K. (2014). Optimization of Screw Expanders for Power Recovery From Low-Grade Heat Sources. Energy Technology & Policy, 1(1), pp. 131-142. doi: 10.1080/23317000.2014.969454

Read, M. G. ORCID: 0000-0002-7753-2457, Stosic, N. & Smith, I. K. (2020). The influence of rotor geometry on power transfer between rotors in gerotor-type screw compressors. Journal of Mechanical Design, 142(7), doi: 10.1115/1.4045508

Reid, B. A., Gavaises, M., Mitroglou, N. , Hargrave, G. K., Garner, C. P., Long, E. J. & McDavid, R. M. (2014). On the formation of string cavitation inside fuel injectors. Experiments in Fluids, 55(1), .1662. doi: 10.1007/s00348-013-1662-8

Reid, B. A., Gavaises, M., Mitroglou, N. , Hargrave, G. K., Garner, C. P. & McDavid, R. M. (2015). String cavitation formation inside fuel injectors. Journal of Physics: Conference Series, 656(1), 012099. doi: 10.1088/1742-6596/656/1/012099

Reitz, R. D., Ogawa, H., Payri, R. , Fansler, T., Kokjohn, S., Moriyoshi, Y., Agarwal, A. K., Arcoumanis, D., Assanis, D., Bae, C., Boulouchos, K., Canakci, M., Curran, S., Denbratt, I., Gavaises, M. ORCID: 0000-0003-0874-8534, Guenthner, M., Hasse, C., Huang, Z., Ishiyama, T., Johansson, B., Johnson, T. V., Kalghatgi, G., Koike, M., Kong, S. C., Leipertz, A., Miles, P., Novella, R., Onorati, A., Richter, M., Shuai, S., Siebers, D., Su, W., Trujillo, M., Uchida, N., Vaglieco, B. M., Wagner, R. M. & Zhao, H. (2019). IJER editorial: The future of the internal combustion engine. International Journal of Engine Research, doi: 10.1177/1468087419877990

Revell, A., O Connor, J., Sarkar, A. , Li, C., Favier, J., Kamps, L. & Brücker, C. (2016). The PELskin project: part II—investigating the physical coupling between flexible filaments in an oscillating flow. Meccanica, doi: 10.1007/s11012-016-0525-9

Revestido Herrero, E., Tomas-Rodriguez, M. & Gonzalez, F. J. V. (2013). Iterated Nonlinear Control of Ship's Manoeuvring Models. 2013 IEEE 52nd Annual Conference on Decision and Control (CDC), pp. 6168-6175. doi: 10.1109/CDC.2013.6760864

Richards, S. & Al Zaili, J. ORCID: 0000-0003-4072-2107 (2020). Contribution of encouraging the future use of biomethane to resolving sustainability and energy security challenges: The case of the UK. Energy for Sustainable Development, 55, pp. 48-55. doi: 10.1016/j.esd.2019.12.003

Riley, P. H. ORCID: 0000-0002-1580-7689, Pullen, K. R. ORCID: 0000-0001-8501-9226, Dordevic, O. , DeLilo, L. & De Giorgio, M. (2020). A Qualitative Assessment of a Modified Multilevel Converter Topology M2LeC for Lightweight Low-cost Electric Propulsion. Engineering, 12(7), pp. 496-515. doi: 10.4236/eng.2020.127035

Rivero, A. E., Fournier, S., Manolesos, M. ORCID: 0000-0002-5506-6061 , Cooper, J. E. & Woods, B. K. S. (2021). Experimental aerodynamic comparison of active camber morphing and trailing-edge flaps. AIAA Journal, 59(7), doi: 10.2514/1.J059606

Riziotis, V. A., Katsaounis, G. M., Papadakis, G. , Voutsinas, S. G., Bergeles, G. & Tzabiras, G. D. (2013). Numerical and experimental analysis of the hydroelastic behavior of purse seine nets. Ocean Engineering, 58, pp. 88-105. doi: 10.1016/j.oceaneng.2012.09.022

Rockenbach, A., Brücker, C. & Schnakenberg, U. (2014). Pneumatically actuated biomimetic particle transporter. 2014 IEEE 27th International Conference on Micro Electro Mechanical Systems (MEMS), pp. 927-930. doi: 10.1109/MEMSYS.2014.6765794

Rockenbach, A., Mikulich, V., Bruecker, C. & Schnakenberg, U. (2015). Fluid transport via pneumatically actuated waves on a ciliated wall. Journal of Micromechanics and Microengineering, 25(12), 125009.. doi: 10.1088/0960-1317/25/12/125009

Rodriguez, C., Koukouvinis, F. ORCID: 0000-0002-3945-3707 & Gavaises, M. ORCID: 0000-0003-0874-8534 (2018). Simulation of supercritical Diesel jets using the PC-SAFT EoS. The Journal of Supercritical Fluids, doi: 10.1016/j.supflu.2018.11.003

Rodriguez, C., Rokni, H., Koukouvinis, F. ORCID: 0000-0002-3945-3707 , Gupta, A. & Gavaises, M. ORCID: 0000-0003-0874-8534 (2019). Complex multicomponent real fluid thermodynamic model for high pressure Diesel fuel injection. Fuel, 257, 115888.. doi: 10.1016/j.fuel.2019.115888

Rodriguez, C., Rokni, H. B., Koukouvinis, P. ORCID: 0000-0002-3945-3707 , Gupta, A. & Gavaises, M. ORCID: 0000-0003-0874-8534 (2019). CFD simulation of pseudo-diesel injections at high-load conditions employing the PC-SAFT EoS and VLE calculations. Paper presented at the ILASS–Europe 2019, 29th Conference on Liquid Atomization and Spray Systems, 2 - 4 September 2019, Paris, France.

Rodriguez, C., Vidal, A., Koukouvinis, P. & Gavaises, M. (2018). Simulation of transcritical Diesel jets using the PC-SAFT EoS. Paper presented at the ICLASS 2018, 22-26 Jul 2018, Chicago, USA.

Rodriguez, C., Vidal, A., Koukouvinis, P. ORCID: 0000-0002-3945-3707 , Gavaises, M. ORCID: 0000-0003-0874-8534 & McHugh, M. A. (2018). Simulation of transcritical fluid jets using the PC-SAFT EoS. Journal of Computational Physics, 374, doi: 10.1016/j.jcp.2018.07.030

Rodriguez, C., Vidal Roncero, A., Koukouvinis, P. ORCID: 0000-0002-3945-3707 & Gavaises, M. ORCID: 0000-0003-0874-8534 (2017). Supercritical and transcritical real-fluid mixing using the PC-SAFT EOS. Paper presented at the ILASS 2017 - 28th European Conference on Liquid Atomization and Spray Systems, 6 - 8 September 2017, Valencia, Spain. doi: 10.4995/ILASS2017.2017.5000

Rodriguez Fernandez, Carlos (2019). Supercritical, transcritical and subcritical real-fluid mixing at high-pressure conditions using the PC-SAFT EoS. (Unpublished Doctoral thesis, City, University of London)

Rokni, H., Gupta, A., Moore, J. , McHugh, M. A., Bamgbade, B. & Gavaises, M. ORCID: 0000-0003-0874-8534 (2019). Purely predictive method for density, compressibility, and expansivity for hydrocarbon mixtures and diesel and jet fuels up to high temperatures and pressures. Fuel, 236, pp. 1377-1390. doi: 10.1016/j.fuel.2018.09.041

Rokni, H., Moore, J., Gupta, A. , McHugh, M. A. & Gavaises, M. ORCID: 0000-0003-0874-8534 (2019). Entropy scaling based viscosity predictions for hydrocarbon mixtures and diesel fuels up to extreme conditions. Fuel, 241, pp. 120-1213. doi: 10.1016/j.fuel.2018.12.043

Rokni, H. B., Moore, J. D. & Gavaises, E. (2020). Entropy-scaling based pseudo-component viscosity and thermal conductivity models for hydrocarbon mixtures and fuels containing iso-alkanes and two-ring saturates. Fuel, 118877.. doi: 10.1016/j.fuel.2020.118877

Rokni, H. B., Moore, J. D., Gupta, A. , McHugh, M. A., Mallepally, R. R. & Gavaises, M. ORCID: 0000-0003-0874-8534 (2019). General method for prediction of thermal conductivity for well-characterized hydrocarbon mixtures and fuels up to extreme conditions using entropy scaling. Fuel, doi: 10.1016/j.fuel.2019.02.044

Roncero, A. V. (2020). Numerical modelling of multiphase diesel fuel properties using the PC-SAFT equation of state and its effect on nozzle flow and cavtation under extreme pressurisation. (Unpublished Doctoral thesis, City, University of London)

Rosti, M. E., Brandt, L. & Pinelli, A. ORCID: 0000-0001-5564-9032 (2018). Turbulent channel flow over an anisotropic porous wall - drag increase and reduction. Journal of Fluid Mechanics, 842, pp. 381-394. doi: 10.1017/jfm.2018.152

Rosti, M. E., Kamps, L., Bruecker, C. , Omidyeganeh, M. & Pinelli, A. (2016). The PELskin project-part V: towards the control of the flow around aerofoils at high angle of attack using a self-activated deployable flap. Meccanica, doi: 10.1007/s11012-016-0524-x

Rosti, M. E., Omidyeganeh, M. & Pinelli, A. (2016). Direct numerical simulation of the flow around an aerofoil in ramp-up motion. Physics of Fluids, 28(2), 025106. doi: 10.1063/1.4941529

Rosti, M. E., Omidyeganeh, M. ORCID: 0000-0002-4140-2810 & Pinelli, A. ORCID: 0000-0001-5564-9032 (2018). Numerical Simulation of a Passive Control of the Flow Around an Aerofoil Using a Flexible, Self Adaptive Flaplet. Flow, Turbulence and Combustion, doi: 10.1007/s10494-018-9914-6

Rosti, M. E., Omidyeganeh, M. & Pinelli, A. (2018). Passive control of the flow around unsteady aerofoils using a self-activated deployable flap. Journal of Turbulence, 19(3), pp. 204-228. doi: 10.1080/14685248.2017.1314486

Rowane, A. J., Babu, V. M., Rokni, H. B. , Moore, J. D., Gavaises, M. ORCID: 0000-0003-0874-8534, Wensing, M., Gupta, A. & McHugh, M. A. (2019). Effect of Composition, Temperature, and Pressure on the Viscosities and Densities of Three Diesel Fuels. Journal of Chemical & Engineering Data, 64(12), pp. 5529-5547. doi: 10.1021/acs.jced.9b00652

Rowane, A. J., Gavaises, M. ORCID: 0000-0003-0874-8534 & McHugh, M. A. (2019). Vapor-liquid equilibria and mixture densities for 2,2,4,4,6,8,8-heptamethylnonane + N2 and n-hexadecane + N2 binary mixtures up to 535 K and 135 MPa. Fluid Phase Equilibria, 506, 112378.. doi: 10.1016/j.fluid.2019.112378

Rowane, A. J., Gupta, A., Gavaises, M. ORCID: 0000-0003-0874-8534 & McHugh, M. A. (2020). Experimental and modeling investigations of the phase behavior and densities of diesel plus nitrogen mixtures. Fuel, 265, 117027.. doi: 10.1016/j.fuel.2020.117027

Rowane, A. J., Mallepally, R. R., Gavaises, M. ORCID: 0000-0003-0874-8534 & McHugh, M. A. (2020). Interfacial tension of isomers n-hexadecane and 2,2,4,4,6,8,8-heptamethylnonane at high pressures and temperatures. Industrial & Engineering Chemistry Research, 59(19), pp. 9293-9299. doi: 10.1021/acs.iecr.0c00213

Rowane, A. J., Mallepally, R. R., Gupta, A. , Gavaises, M. ORCID: 0000-0003-0874-8534 & McHugh, M. A. (2019). High-Temperature, High-Pressure Viscosities and Densities of n-Hexadecane, 2,2,4,4,6,8,8-Heptamethylnonane, and Squalane Measured Using a Universal Calibration for a Rolling-Ball Viscometer/Densimeter. Industrial & Engineering Chemistry Research, doi: 10.1021/acs.iecr.8b05952

Roy, R. ORCID: 0000-0001-5491-7437 & Brooks, S. J. ORCID: 0000-0002-5712-7358 (2020). Self-engineering – Technological Challenges. In: Karabegovic, I. (Ed.), New Technologies, Development and Application III (Lecture Notes in Networks and Systems). (pp. 16-30). Cham, Switzerland: Springer. doi: 10.1007/978-3-030-46817-0_2

S

Saha, C. R., Riley, P. H. ORCID: 0000-0002-1580-7689, Jinks, R. & Johnson, C. M. (2018). Suspension Design, Modeling, and Testing of a Thermo-Acoustic-Driven Linear Alternator. Journal Of Vibration And Acoustics, 140(2), 021014. doi: 10.1115/1.4038270

Salah, S., Khader, M. A., White, M. T. ORCID: 0000-0002-7744-1993 & Sayma, A. I. ORCID: 0000-0003-2315-0004 (2020). Mean-Line Design of a Supercritical CO2 Micro Axial Turbine. Applied Sciences, 10(15), 5069.. doi: 10.3390/app10155069

Salah, S., White, M. ORCID: 0000-0002-7744-1993 & Sayma, A. I. ORCID: 0000-0003-2315-0004 (2022). A comparison of axial turbine loss models for air, sCO₂ and ORC turbines across a range of scales. International Journal of Thermofluids, 15, 100156. doi: 10.1016/j.ijft.2022.100156

Salemi, R., Koukouvinis, P., Strotos, G. , McDavid, R., Wang, L., Li, J., Marengo, M. & Gavaises, M. (2015). Evaluation of friction heating in cavitating high pressure Diesel injector nozzles. Journal of Physics: Conference Series, 656(1), 012083. doi: 10.1088/1742-6596/656/1/012083

Sanchez, T., Dennis, R. & Pullen, K. R. (2013). Cooking and lighting habits in rural Nepal and Uganda. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 227(7), pp. 727-739. doi: 10.1177/0957650913498872

Sastuba, M., Skupsch, C. & Bruecker, C. ORCID: 0000-0001-5834-3020 (2014). Real time visualization and analysis of sensory hair arrays using fast image processing and proper orthogonal decomposition. Paper presented at the 17th International Symposium on Applications of Laser and Imaging Techniques to Fluid Mechanics, 7-10 July 2014, Lisbon, Portugal.

Sayma, A. I. (2017). Gas Turbines for Marine Applications. In: Carlton, J., Jukes, P. & Sang, C-Y. (Eds.), Encyclopedia of Maritime and Offshore Engineering. (pp. 1-10). John Wiley & Sons, Ltd.. doi: 10.1002/9781118476406.emoe227

Sayma, A. I. (2011). Towards virtual testing of compression systems in gas turbine engines. NAFEMS International Journal of CFD Case Studies, 9, pp. 29-42.

Sayma, A. I. ORCID: 0000-0003-2315-0004 & Al Zaili, J. ORCID: 0000-0003-4072-2107 (2016). Challenges in the Development of Micro Gas Turbines for Concentrated Solar Power Systems. Paper presented at the 8th International Gas Turbine Conference – The Future of Gas Turbine Technology, 12-13 Oct 2016, Brussels, Belgium.

Sayma, A. I., Iaria, D., Khader, M. & Al Zaili, J. ORCID: 0000-0003-4072-2107 (2017). Multi-Objective Optimisation of A Centrifugal Compressor for a Micro Gas Turbine Operated by Concentrated Solar Power. Proceedings of the Global Power and Propulsion Forum 2017, ISSN 2504-4400

Schembri, M., Farrugia, P., Wodehouse, A. J. , Grierson, H. & Kovacevic, A. (2015). Influence of sketch types on distributed design team work. CoDesign, 11(2), pp. 99-118. doi: 10.1080/15710882.2015.1054841

Schmitz, A., Ondreka, N., Poleschinski, J. , Fischer, D., Schmitz, H., Klein, A., Bleckmann, H. & Bruecker, C. ORCID: 0000-0001-5834-3020 (2018). The peregrine falcon's rapid dive: on the adaptedness of the arm skeleton and shoulder girdle. Journal of Comparative Physiology A: Neuroethology, Sensory, Neural, and Behavioral Physiology, 204(8), pp. 747-759. doi: 10.1007/s00359-018-1276-y

Schmitz, A., Ponitz, B., Brücker, C. , Schmitz, H., Herweg, J. & Bleckmann, H. (2015). Morphological properties of the last primaries, the tail feathers, and the alulae of Accipiter nisus, Columba livia, Falco peregrinus, and Falco tinnunculus. Journal of Morphology, 276(1), pp. 33-46. doi: 10.1002/jmor.20317

Sekimoto, A., Kawahara, G., Sekiyama, K. , Uhlmann, M. & Pinelli, A. (2011). Turbulence-and buoyancy-driven secondary flow in a horizontal square duct heated from below. Physics of fluids, 23, 075103. doi: 10.1063/1.3593462

Selim, O., Gowree, E., Lagemann, C. , Talboys, E. ORCID: 0000-0001-8993-0180, Jagadeesh, C. & Bruecker, C. ORCID: 0000-0001-5834-3020 (2021). The Peregrine Falcon's Dive: On the Pull-Out Maneuver and Flight Control Through Wing-Morphing. AIAA Journal: devoted to aerospace research and development, 59(10), pp. 3979-3987. doi: 10.2514/1.J060052

Sharma, B., Thakur, S., Trache, D. , Yazdani Nezhad, H. ORCID: 0000-0003-0832-3579 & Thakur, V. K. (2020). Microwave-Assisted Rapid Synthesis of Reduced Graphene Oxide-Based Gum Tragacanth Hydrogel Nanocomposite for Heavy Metal Ions Adsorption. Nanomaterials, 10(8), doi: 10.3390/nano10081616

Singh, G. ORCID: 0000-0001-7456-7868, Sun, S., Kovacevic, A. , Li, Q. & Bruecker, C. (2019). Transient flow analysis in a Roots blower: Experimental and numerical investigations. Mechanical Systems and Signal Processing, 134, 106305.. doi: 10.1016/j.ymssp.2019.106305

Singh, H., Kaufmann, N., Ouro, P. , Papadakis, G. & Manolesos, M. ORCID: 0000-0002-5506-6061 (2021). On the use of vortex generators to improve tidal turbine performance. Proceedings of the European Wave and Tidal Energy Conference, 2026-1-2026-9. ISSN 2706-6932

Siwal, S. S., Sheoran, K., Mishra, K. , Kaur, H., Saini, A. K., Saini, V., Vo, D-V. N., Yazdani Nezhad, H. ORCID: 0000-0003-0832-3579 & Thakur, V. K. (2022). Novel synthesis methods and applications of MXene-based nanomaterials (MBNs) for hazardous pollutants degradation: Future perspectives. Chemosphere, 293, 133542. doi: 10.1016/j.chemosphere.2022.133542

Skillen, A., Revell, A., Pinelli, A. , Piomelli, U. & Favier, J. (2015). Flow over a Wing with Leading-Edge Undulations. AIAA Journal, 53(2), pp. 464-472. doi: 10.2514/1.J053142

Skupsch, C. & Brücker, C. (2013). Multiple-plane particle image velocimetry using a light-field camera. Optics Express, 21(2), pp. 1726-1740. doi: 10.1364/OE.21.001726

Smith, I. K., Stosic, N., Mujic, E. & Kovacevic, A. (2011). Steam as the working fluid for power recovery from exhaust gases by means of screw expanders. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 225(2), pp. 117-125. doi: 10.1177/2041300910393429

Soomro, A., Amiryar, M. E., Nankoo, D. & Pullen, K. R. ORCID: 0000-0001-8501-9226 (2019). Performance and Loss Analysis of Squirrel Cage Induction Machine Based Flywheel Energy Storage System. Applied Sciences, 9(21), 4537.. doi: 10.3390/app9214537

Soomro, A., Amiryar, M. E., Pullen, K. R. ORCID: 0000-0001-8501-9226 & Nankoo, D. (2018). Comparison of Performance and Controlling Schemes of Synchronous and Induction Machines Used in Flywheel Energy Storage Systems. Energy Procedia, 151, pp. 100-110. doi: 10.1016/j.egypro.2018.09.034

Soto-Valle, R., Alber, J., Manolesos, M. ORCID: 0000-0002-5506-6061 , Nayeri, C. N. & Paschereit, C. O. (2020). Wind Turbine Tip Vortices under the influence of Wind Tunnel Blockage Effects. Journal of Physics: Conference Series, 1618(3), ISSN 1742-6588 doi: 10.1088/1742-6596/1618/3/032045

Soto-Valle, R., Bartholomay, S., Alber, J. , Manolesos, M. ORCID: 0000-0002-5506-6061, Nayeri, C. N. & Paschereit, C. O. (2020). Determination of the angle of attack on a research wind turbine rotor blade using surface pressure measurements. Wind Energy Science, 5(4), pp. 1771-1792. doi: 10.5194/wes-5-1771-2020

Stavropoulos Vasilakis, E., Kyriazis, N., Koukouvinis, P. , Farhat, M. & Gavaises, M. ORCID: 0000-0003-0874-8534 (2019). Cavitation Induction by Projectile Impacting on a Water Jet. International Journal of Multiphase Flow, doi: 10.1016/j.ijmultiphaseflow.2019.03.001

Stavropoulos Vasilakis, E., Rodriguez, C., Kyriazis, N. , Malgarinos, I., Koukouvinis, P. ORCID: 0000-0002-3945-3707 & Gavaises, M. ORCID: 0000-0003-0874-8534 (2021). A direct forcing Immersed Boundary Method for Cavitating Flows. International Journal for Numerical Methods in Fluids, 93(10), pp. 3092-3130. doi: 10.1002/fld.5026

Stavropoulos-Vasilakis, E. (2020). Immersed boundary method for cavitating and biological flows. (Unpublished Doctoral thesis, City, University of London)

Stavropoulos-Vasilakis, E., Koukouvinis, F. ORCID: 0000-0002-3945-3707, Gavaises, E. ORCID: 0000-0003-0874-8534 & Farhat, M. (2018). Cavitation Induction by Projectile Impacting on a Water Jet. Paper presented at the The 10th International Symposium on Cavitation (CAV2018), 14-16 May 2018, Baltimore, USA.

Stefanitsis, D., Koukouvinis, F. ORCID: 0000-0002-3945-3707, Nikolopoulos, N. & Gavaises, M. ORCID: 0000-0003-0874-8534 (2021). Numerical Investigation of the Aerodynamic Droplet Breakup at Mach Numbers Greater Than 1. Journal of Energy Engineering, 147(1), 04020077. doi: 10.1061/(ASCE)EY.1943-7897.0000720

Stefanitsis, D., Malgarinos, I., Strotos, G. , Nikolopoulos, N, Kakaras, E. & Gavaises, M. (2018). Numerical investigation of the aerodynamic breakup of droplets in tandem. International Journal of Multiphase Flow, doi: 10.1016/j.ijmultiphaseflow.2018.10.015

Stefanitsis, D., Malgarinos, I., Strotos, G. , Nikolopoulos, N., Kakaras, E. & Gavaises, M. ORCID: 0000-0003-0874-8534 (2017). Numerical investigation of the aerodynamic breakup of Diesel and heavy fuel oil droplets. International Journal of Heat and Fluid Flow, 68, pp. 203-215. doi: 10.1016/j.ijheatfluidflow.2017.10.012

Stefanitsis, D., Strotos, G., Nikolopoulos, N. & Gavaises, M. ORCID: 0000-0003-0874-8534 (2019). Numerical investigation of the aerodynamic breakup of a parallel moving droplet cluster. International Journal of Multiphase Flow, doi: 10.1016/j.ijmultiphaseflow.2019.103123

Stefanitsis, D., Strotos, G., Nikolopoulos, N. , Kakaras, E. & Gavaises, M. ORCID: 0000-0003-0874-8534 (2019). Improved droplet breakup models for spray applications. International Journal of Heat and Fluid Flow, 76, pp. 274-286. doi: 10.1016/j.ijheatfluidflow.2019.02.010

Stosic, N. (2019). Operation and performance of screw machines with high built-in volume ratio. IOP Conference Series: Materials Science and Engineering, 604(1), doi: 10.1088/1757-899X/604/1/012014

Stosic, N., Kovacevic, A. ORCID: 0000-0002-8732-2242 & Smith, I. K. ORCID: 0000-0003-1524-9880 (2003). Three Dimensional Numerical Analysis of Screw Compressor Performance. Journal of Computer Methods in Applied Mechanics and Engineering, 3(2), pp. 259-284. doi: 10.3233/JCM-2003-3206

Stosic, N., Rane, S., Kovacevic, A. ORCID: 0000-0002-8732-2242 & Smith, I. K. ORCID: 0000-0003-1524-9880 (2016). Screw Rotor Profiles of Variable Lead Vacuum and Multiphase Machines and Their Calculation Models. In: ASME 2016 International Mechanical Engineering Congress and Exposition, Volume 6A: Energy. . ASME. ISBN 978-0-7918-5058-9 doi: 10.1115/IMECE2016-66314

Stosic, N., Smith, I., Kovacevic, A. & Mujic, E. (2011). Review of Mathematical Models in Performance Calculation of Screw Compressors. International Journal of Fluid Machinery and Systems, 4(2), pp. 271-288. doi: 10.5293/IJFMS.2011.4.2.271

Stosic, N., Smith, I. K., Chukanova, E. & Kovacevic, A. (2013). Experimental Investigation and Numerical Modelling of Dynamic Behaviour of Screw Compressor Plant. Universal Journal of Engineering Science, 1, pp. 68-79. doi: 10.13189/ujes.2013.010302

Stosic, N., Smith, I. K. & Kovacevic, A. ORCID: 0000-0002-8732-2242 (2019). Improving Screw Compressor Displacement and Efficiency by Increasing the Rotor Profile Depth. IOP Conference Series: Materials Science and Engineering, 604(1), 011012.. ISSN 1757-8981 doi: 10.1088/1757-899X/604/1/011012

Stosic, N., Smith, I. K. ORCID: 0000-0003-1524-9880 & Kovacevic, A. ORCID: 0000-0002-8732-2242 (2012). Numerical and experimental research in heat transfer to screw compressor rotors. Frontiers in Heat and Mass Transfer, 3(2), 023003.. doi: 10.5098/hmt.v3.2.3003

Stosic, N., Smith, I. K. ORCID: 0000-0003-1524-9880 & Kovacevic, A. ORCID: 0000-0002-8732-2242 (2003). Optimisation of screw compressors. Applied Thermal Engineering, 23(10), pp. 1177-1195. doi: 10.1016/S1359-4311(03)00059-0

Stosic, N., Smith, I. K. ORCID: 0000-0003-1524-9880 & Kovacevic, A. ORCID: 0000-0002-8732-2242 (2003). Rotor interference as a criterion for screw compressor design. Journal of Engineering Design, 14(2), pp. 209-220. doi: 10.1080/0954482031000091518

Stosic, N., Smith, I. K. & Kovacevic, A. (2009). Steam as the Working Fluid for Power Recovery from Exhaust Gases by Means of Screw Expanders. Paper presented at the International Conference on Compressors and Their Systems, 07-09-2009 - 09-09-2009, London, England.

Stosic, N., Smith, I. K. ORCID: 0000-0003-1524-9880, Kovacevic, A. ORCID: 0000-0002-8732-2242 & Mujic, E. (2011). Geometry of screw compressor rotors and their tools. Journal of Zhejiang University-SCIENCE A, 12(4), pp. 310-326. doi: 10.1631/jzus.A1000393

Strotos, G., Aleksis, G., Gavaises, M. , Nikas, K-S., Nikolopoulos, N. & Theodorakakos, A. (2011). Non-dimensionalisation parameters for predicting the cooling effectiveness of droplets impinging on moderate temperature solid surfaces. International Journal of Thermal Sciences, 50(5), pp. 698-711. doi: 10.1016/j.ijthermalsci.2010.11.021

Strotos, G., Gavaises, M., Theodorakakos, A. & Bergeles, G. (2011). Numerical investigation of the evaporation of two-component droplets. Fuel, 90(4), pp. 1492-1507. doi: 10.1016/j.fuel.2011.01.017

Strotos, G., Gavaises, M., Theodorakakos, A. & Bergeles, G. (2008). Numerical investigation on the evaporation of droplets depositing on heated surfaces at low Weber numbers. International Journal of Heat and Mass Transfer, 51(7-8), pp. 1516-1529. doi: 10.1016/j.ijheatmasstransfer.2007.07.045

Strotos, G., Koukouvinis, P., Theodorakakos, A. , Gavaises, M. & Bergeles, G. (2015). Transient heating effects in high pressure Diesel injector nozzles. International Journal of Heat and Fluid Flow, 51, pp. 257-267. doi: 10.1016/j.ijheatfluidflow.2014.10.010

Strotos, G., Malgarinos, I., Nikolopoulos, N. & Gavaises, M. (2016). Aerodynamic breakup of an n-decane droplet in a high temperature gas environment. Fuel, 185, pp. 370-380. doi: 10.1016/j.fuel.2016.08.014

Strotos, G., Malgarinos, I., Nikolopoulos, N. & Gavaises, M. (2016). Numerical investigation of aerodynamic droplet breakup in a high temperature gas environment. Fuel, 181, pp. 450-462. doi: 10.1016/j.fuel.2016.04.126

Strotos, G., Malgarinos, I., Nikolopoulos, N. & Gavaises, M. (2016). Predicting droplet deformation and breakup for moderate Weber numbers. International Journal of Multiphase Flow, 85, pp. 96-109. doi: 10.1016/j.ijmultiphaseflow.2016.06.001

Strotos, G., Malgarinos, I., Nikolopoulos, N. & Gavaises, M. (2016). Predicting the evaporation rate of stationary droplets with the VOF methodology for a wide range of ambient temperature conditions. International Journal of Thermal Sciences, 109, pp. 253-262. doi: 10.1016/j.ijthermalsci.2016.06.022

Strotos, G., Malgarinos, I., Nikolopoulos, N. , Gavaises, M. ORCID: 0000-0003-0874-8534, Nikas, K-S. & Moustris, K. (2018). Determination of the aerodynamic droplet breakup boundaries based on a total force approach. International Journal of Heat and Fluid Flow, 69, pp. 164-173. doi: 10.1016/j.ijheatfluidflow.2018.01.001

Su, H. & Banerjee, R. (2018). The modal characteristics of high aspect ratio sailplane wings including the effects of bending and torsional rigidities. Journal of Physics: Conference Series, 1048, 012010.. doi: 10.1088/1742-6596/1048/1/012010

Suardi, C., Pinelli, A. ORCID: 0000-0001-5564-9032 & Omidyeganeh, M. ORCID: 0000-0002-4140-2810 (2020). The Effect of the Sweep Angle to the Turbulent Flow Past an Infinite Wing. In: García-Villalba, M., Kuerten, H. & Salvetti, M. (Eds.), Direct and Large Eddy Simulation XII. DLES 2019. (ERCOFTAC Series). (pp. 321-327). Cham, Switzerland: Springer. doi: 10.1007/978-3-030-42822-8_42

Suardi, C. A. (2020). Separating flows around swept and unswept wings with laminar and turbulent free stream conditions. (Unpublished Doctoral thesis, City, University of London)

Sun, S., Kovacevic, A. ORCID: 0000-0002-8732-2242, Bruecker, C. ORCID: 0000-0001-5834-3020 , Ghavami, M., Rane, S., Singh, G. & Leto, A. (2018). Experimental Investigation of the Transient Flow in Roots Blower. Paper presented at the 24th International Compressor Engineering Conference, 9 - 12 July 2018, Purdue University, West Lafayette, USA.

Sun, S., Singh, G., Kovacevic, A. ORCID: 0000-0002-8732-2242 & Bruecker, C. ORCID: 0000-0001-5834-3020 (2020). Experimental and numerical investigation of tip leakage flows in a roots blower. Designs, 4(1), 3.. doi: 10.3390/designs4010003

Sun, S. H., Kovacevic, A., Bruecker, C. , Leto, A., Singh, G. & Ghavami, M. (2018). Numerical and Experimental Analysis of Transient Flow in Roots Blower. IOP Conference Series: Materials Science and Engineering, 425, 012024.. doi: 10.1088/1757-899X/425/1/012024

Sun, S. H., Wu, P. B., Guo, P. C. , Yi, G. Z., Kovacevic, A. ORCID: 0000-0002-8732-2242, Zhang, H. & Wu, G. K. (2021). Numerical investigation on a double suction twin-screw multiphase pump. IOP Conference Series: Earth and Environmental Science, 774, ISSN 1755-1307 doi: 10.1088/1755-1315/774/1/012048

Sun, T., Fabian, M., Chen, Y. , Vidakovic, M., Javdani, S., Grattan, K. T. V., Carlton, J., Gerada, C. & Brun, L. (2017). Optical fibre sensing: A solution for industry. Proceedings of SPIE, 10323, 103231H. doi: 10.1117/12.2272471

Sun, Z. ORCID: 0000-0002-3862-7939 (2018). Converged high-speed schlieren for shock wave boundary layer interaction study. Paper presented at the 19th International Symposium on Applications of Laser and Imaging Techniques to Fluid Mechanics, 16-19 Jul 2018, Lisbon, Portugal.

Sun, Z. (2015). Micro Vortex Generators for Boundary Layer Control: Principles and Applications. International Journal of Flow Control, 7(1-2), pp. 67-86. doi: 10.1260/1756-8250.7.1-2.67

Sun, Z. & Bruecker, C. (2017). Investigation of the Vortex Ring Transition using Scanning Tomo-PIV. Experiments in Fluids, 58, 36.. doi: 10.1007/s00348-017-2322-1

Sun, Z. & Bruecker, C. (2016). PIV Study of Flow Separations at a Forward-Facing Step using Long-Range Microscope. Paper presented at the 2016 Applied Aerodynamics Conference: Evolution & Innovation Continues - The Next 150 Years of Concepts, Design and Operations, 19-21 Jul 2016, Bristol, UK.

Sun, Z. ORCID: 0000-0002-3862-7939 & Bruecker, C. ORCID: 0000-0001-5834-3020 (2017). Vortex ring impingement measured by scanning PIV. Paper presented at the 12th International Symposium on Particle Image Velocimetry, 18-22 Jun 2017, Busan, South Korea.

Sun, Z., Bruecker, C. & Pointz, B. (2016). Transition of A Vortex Ring Visualized by 3D Scanning TomoPIV. Paper presented at the 18th International Symposium on Applications of Laser Techniques to Fluid Mechanics, 4-7 Jul 2016, Lisbon, Portugal.

Sun, Z. ORCID: 0000-0002-3862-7939, Gan, T. & Wu, Y. (2018). Shock wave boundary layer interaction studied by high-speed schlieren. Paper presented at the 19th International Symposium on Applications of Laser and Imaging Techniques to Fluid Mechanics, 16-19 Jul 2018, Lisbon, Portugal.

Sun, Z. ORCID: 0000-0002-3862-7939, Gan, T. & Wu, Y. (2020). Shock-Wave/Boundary-Layer Interactions at Compression Ramps Studied by High-Speed Schlieren. AIAA Journal, 58(4), doi: 10.2514/1.j058257

Sun, Z. ORCID: 0000-0002-3862-7939, Li, Q. & Bruecker, C. ORCID: 0000-0001-5834-3020 (2018). Short wavelength instability in the vortex ring during impingement onto a solid wall. Paper presented at the 19th International Symposium on Applications of Laser and Imaging Techniques to Fluid Mechanics, 16-19 Jul 2018, Lisbon, Portugal.

Sun, Z., Longmire, E. K. & Krizan, D. (2014). Interactions of copepods with fractal-grid generated turbulence based on Tomo-PIV and 3D-PTV. Paper presented at the 67th Annual Meeting of the APS Division of Fluid Dynamics, 23-11-2014 - 25-11-2014, San Francisco, USA.

Sun, Z., Miao, X. & Jagadeesh, C. ORCID: 0000-0002-3862-7939 (2020). Experimental investigation of the transonic shock-wave/boundary-layer interaction over a shock-generation bump. Physics of Fluids, 32(10), 106102.. doi: 10.1063/5.0018763

Sun, Z., Pointz, B. & Bruecker, C. ORCID: 0000-0001-5834-3020 (2016). Transition of a vortex ring measured by 3D scanning Tomo-PIV. Paper presented at the 18th International Symposium on Applications of Laser Techniques to Fluid Mechanics, 4-7 Jul 2016, Lisbon, Portugal.

Sun, Z., Scarano, F., van Oudheusden, B. W. , Schrijer, F. F. J., Yan, Y. & Liu, C. (2014). Numerical and experimental investigations of the supersonic microramp wake. AIAA Journal, 52(7), pp. 1518-1527. doi: 10.2514/1.J052649

Sun, Z., Schrijer, F. F. J., Scarano, F. & van Oudheusden, B. W. (2014). Decay of the supersonic turbulent wakes from micro-ramps. Physics of Fluids, 26(2), 025115. doi: 10.1063/1.4866012

Sun, Z., Schrijer, F. F. J., Scarano, F. & van Oudheusden, B. W. (2012). PIV investigation of the 3D instantaneous flow organization behind a micro-ramp in a supersonic boundary layer. Paper presented at the 28th International Symposium on Shock Waves, 17-07-2011 - 22-07-2011, Manchester, UK. doi: 10.1007/978-3-642-25685-1_63

Sun, Z., Schrijer, F. F. J., Scarano, F. & van Oudheusden, B. W. (2012). The three-dimensional flow organization past a micro-ramp in a supersonic boundary layer. Physics of Fluids, 24(5), 055105. doi: 10.1063/1.4711372

T

Takeishi, K., Kawahara, G., Wakabayashi, H. , Uhlmann, M. & Pinelli, A. (2015). Localized turbulence structures in transitional rectangular-duct flow. Journal of Fluid Mechanics, 782, pp. 368-379. doi: 10.1017/jfm.2015.546

Talboys, E ORCID: 0000-0001-8993-0180, Geyer, T. F. & Bruecker, C. ORCID: 0000-0001-5834-3020 (2019). An aeroacoustic investigation into the effect of self-oscillating trailing edge flaplets. Journal of Fluids and Structures, doi: 10.1016/j.jfluidstructs.2019.02.014

Talboys, E. (2021). On the aerodynamic and aeroacoustic effect of passive trailing edge flaplets. (Unpublished Doctoral thesis, City, University of London)

Talboys, E. & Bruecker, C. ORCID: 0000-0001-5834-3020 (2018). Upstream Shear Layer Stabilisation via Self-Oscillating Trailing Edge Flaplets. Experiments in Fluids, doi: 10.1007/s00348-018-2598-9

Talboys, E. ORCID: 0000-0001-8993-0180, Geyer, T. F. & Brücker, C. ORCID: 0000-0001-5834-3020 (2019). Influence of self-oscillating trailing edge flaplets on turbulent boundary layer - Trailing edge noise. In: Ochmann, M., Vorländer, M. & Fels, J. (Eds.), Proceedings of the 23rd International Congress on Acoustics : integrating 4th EAA Euroregio 2019 : 9-13 September 2019 in Aachen, Germany. (pp. 588-595). Berlin: Deutsche Gesellschaft für Akustik. doi: 10.18154/RWTH-CONV-239824

Talboys, E. ORCID: 0000-0001-8993-0180, Geyer, T. F., Pruefer, F. & Bruecker, C. ORCID: 0000-0001-5834-3020 (2021). A parametric study of the effect of self-oscillating trailing-edge flaplets on aerofoil self-noise. Applied Acoustics, 177, 107907. doi: 10.1016/j.apacoust.2020.107907

Talboys, E. ORCID: 0000-0001-8993-0180, Geyer, T. F., Prüfer, F. & Brücker, C. ORCID: 0000-0001-5834-3020 (2021). The Aeroacoustic Effect of Different Inter-Spaced Self-oscillating Passive Trailing Edge Flaplets. In: Braza, M., Hoarau, Y., Zhou, Y. , Lucey, A. D., Huang, L. & Stavroulakis, G. E. (Eds.), Fluid-Structure-Sound Interactions and Control. FSSIC 2019. Lecture Notes in Mechanical Engineering. (pp. 161-166). Singapore: Springer. doi: 10.1007/978-981-33-4960-5_25

Tamanna, N. (2019). Modelling of residual stresses of the laser cladding process. (Unpublished Doctoral thesis, City, University of London)

Tamanna, N., Crouch, R.S., Kabir, I. R. & Naher, S. (2018). An Analytical Model to Predict and Minimize the Residual Stress of Laser Cladding Process. Applied Physics A: Materials Science & Processing, doi: 10.1007/s00339-018-1585-6

Tamanna, N., Crouch, R.S. & Naher, S. ORCID: 0000-0003-2047-5807 (2017). A One-dimensional Analysis of the Distribution of Temperature, Stress and Strain in the co-axial Laser Cladding Process. AIP Conference Proceedings, 1896, 040015.. doi: 10.1063/1.5008041

Tamanna, N., Kabir, I. R. & Naher, S ORCID: 0000-0003-2047-5807 (2022). Thermo-mechanical modelling to evaluate residual stress and material compatibility of laser cladding process depositing similar and dissimilar material on Ti6Al4V alloy. Thermal Science and Engineering Progress, 31, doi: 10.1016/j.tsep.2022.101283

Theodorakakos, A., Strotos, G., Mitroglou, N. , Atkin, C. & Gavaises, M. (2014). Friction-induced heating in nozzle hole micro-channels under extreme fuel pressurisation. Fuel, 123, pp. 143-150. doi: 10.1016/j.fuel.2014.01.050

Toja-Silva, F., Favier, J. & Pinelli, A. (2014). Radial basis function (RBF)-based interpolation and spreading for the immersed boundary method. Computers & Fluids, 105, pp. 66-75. doi: 10.1016/j.compfluid.2014.09.026

Tomas-Rodriguez, M. & Banks, S. P. (2013). An iterative approach to eigenvalue assignment for nonlinear systems. International Journal of Control, 86(5), pp. 883-892. doi: 10.1080/00207179.2013.765037

Tomas-Rodriguez, M. ORCID: 0000-0001-9630-9579 & Castillo-Rivera, S. (2020). Rotorcraft Fuselage/Main Rotor Coupling Dynamics Modelling and Analysis. International Journal of Nonlinear Sciences and Numerical Simulation, doi: 10.1515/ijnsns-2019-0102

Tomas-Rodriguez, M. ORCID: 0000-0001-9630-9579, Feroz, K. & Santos, M. (2019). Floating Offshore Wind Turbines Oscillations Damping.. Paper presented at the 10th EUROSIM Congress on Modelling and Simulation Logroño, 01 - 05 July, 2019, La Rioja, Spain. doi: 10.11128/arep.58

Tomas-Rodriguez, M. & Moreno-Ramirez, C. (2018). Dynamic Analysis of Double Wishbone Front Suspension Systems for Sport Motorcycles. Nonlinear Dynamics, 91(4), pp. 2437-2368. doi: 10.1007/s11071-017-4017-9

Tomas-Rodriguez, M. ORCID: 0000-0001-9630-9579, Revestido Herrero, E. & Velasco, F. J. (2021). Iterative Self-Tuning Minimum Variance Control of a Nonlinear Autonomous Underwater Vehicle Maneuvering Model. Electronics, 10(21), 2686. doi: 10.3390/electronics10212686

Tomas-Rodriguez, M. ORCID: 0000-0001-9630-9579 & Santos, M. (2019). Modelling and control of floating offshore wind turbines. REVISTA IBEROAMERICANA DE AUTOMATICA E INFORMATICA INDUSTRIAL, 16(4), doi: 10.4995/riai.2019.11648

Torrisi, F., Hasan, T., Wu, W. , Sun, Z., Lombardo, A., Kulmala, T. S., Hsieh, G-W., Jung, S., Bonaccorso, F., Paul, P. J., Chu, D. & Ferrari, A. C. (2012). Inkjet-Printed Graphene Electronics. ACS Nano, 6(4), pp. 2992-3006. doi: 10.1021/nn2044609

Tran, S. N., Garcez, A., Weyde, T. ORCID: 0000-0001-8028-9905 , Yin, J., Zhang, Q. ORCID: 0000-0003-0982-2986 & Karunanithi, M. (2020). Sequence Classification Restricted Boltzmann Machines With Gated Units. IEEE Transactions on Neural Networks and Learning Systems, 31(11), pp. 4806-4815. doi: 10.1109/TNNLS.2019.2958103

Triep, M., Brücker, C., Kerkhoffs, W. , Schumacher, O. & Marseille, O. (2008). Investigation of the washout effect in a magnetically driven axial blood pump. Artificial Organs, 32(10), pp. 778-784. doi: 10.1111/j.1525-1594.2008.00630.x

Trozzi, V., Gentile, G., Bell, M. G. H. & Kaparias, I. (2013). Dynamic user equilibrium in public transport networks with passenger congestion and hyperpaths. Transportation Research Part B: Methodological, 57, pp. 266-285. doi: 10.1016/j.trb.2013.06.011

Trozzi, V., Gentile, G., Kaparias, I. & Bell, M. G. H. (2015). Effects of countdown displays in public transport route choice under severe overcrowding. Networks and Spatial Economics, 15(3), pp. 823-842. doi: 10.1007/s11067-013-9207-5

Trozzi, V., Kaparias, I., Bell, M. G. H. & Gentile, G. (2013). A dynamic route choice model for public transport networks with boarding queues. Transportation Planning and Technology, 36(1), pp. 44-61. doi: 10.1080/03081060.2012.745720

Tsakarestos, A., Nocera, S., Kaparias, I. & Eden, N. (2011). Performance evaluation of urban traffic management and ITS: The Rome case study. Paper presented at the SIDT National Conference and Scienttfic Seminar, 6-7 Sept 2011, Venice, Italy.

Tvrdojevic, M., Priesching, P., Tap, F. & Goryntsev, D. (2017). Applying a Tabulated Chemistry Approach for the Calculation of Combustion and Emissions in Diesel Engines. Paper presented at the 8th European Combustion Meeting (ECM 2017), 18-21 Apr 2017, Dubrovnik, Croatia.

Tvrdojevic, M., Vujanovic, M., Priesching, P. , Tap, F. A., Starikov, A., Goryntsev, D. & Gavaises, M. ORCID: 0000-0003-0874-8534 (2019). Implementation of the Semi Empirical Kinetic Soot Model within Chemistry Tabulation Framework for Efficient Emissions Predictions in Diesel Engines. Open Physics, 17(1), pp. 905-915. doi: 10.1515/phys-2019-0096

U

Uhlmann, M., Kawahara, G. & Pinelli, A. (2010). Traveling-waves consistent with turbulence-driven secondary flow in a square duct. Physics of Fluids, 22, 084102.. doi: 10.1063/1.3466661

Unamba, C. K., White, M. ORCID: 0000-0002-7744-1993, Sapin, P. , Freeman, J., Lecompte, S., Oyewunmi, O. A. & Markides, C. N. (2017). Experimental Investigation of the Operating Point of a 1-kW ORC System. Energy Procedia, 129, pp. 875-882. doi: 10.1016/j.egypro.2017.09.211

V

Vakilipour, S., Tohidi, Y., Al-Zaili, J. ORCID: 0000-0003-4072-2107 & Riazi, R. (2020). A numerical investigation of CO2 dilution on the thermochemical characteristics of a swirl stabilized diffusion flame. Applied Mathematics and Mechanics, 41(2), pp. 327-348. doi: 10.1007/s10483-020-2571-6

Vakilipour, S., Zarafshani, H. & Al-Zaili, J. ORCID: 0000-0003-4072-2107 (2021). Numerical study of longitudinal vein effects on the aerodynamic characteristics of a corrugated bio-airfoil. Computers & Fluids, 216, 104821. doi: 10.1016/j.compfluid.2020.104821

Valero-Lara, P., Igual, F. D., Prieto-Matias, M. , Pinelli, A. & Favier, J. (2015). Accelerating fluid-solid simulations (Lattice-Boltzmann & Immersed-Boundary) on heterogeneous architectures. International Journal of Computational Science and Engineering (IJCSE), 10, pp. 249-261. doi: 10.1016/j.jocs.2015.07.002

Valero-Lara, P., Pinelli, A. & Prieto-Matias, M. (2014). Accelerating solid-fluid interaction using Lattice-Boltzmann and Immersed Boundary coupled simulations on heterogeneous platforms. Procedia Computer Science, 29, pp. 50-61. doi: 10.1016/j.procs.2014.05.005

Valero-Lara, P., Pinelli, A. & Prieto-Matias, M. (2014). Fast finite difference Poisson solvers on heterogeneous architectures. Computer Physics Communications Package, 185(4), doi: 10.1016/j.cpc.2013.12.026

Veerasamy, D. & Atkin, C.J. ORCID: 0000-0003-2529-1978 (2020). A rational method for determining intermittency in the transitional boundary layer. Experiments in Fluids, 61(1), 11.. doi: 10.1007/s00348-019-2856-5

Veerasamy, D., Atkin, C.J. & Ponnusami, S. A. ORCID: 0000-0002-2143-8971 (2021). Aerofoil wake-induced transition characteristics on a flat-plate boundary layer. Journal of Fluid Mechanics, 920, A29. doi: 10.1017/jfm.2021.452

Vidakovic, M., Armakolas, I., Sun, T. , Carlton, J. & Grattan, K. T. V. (2016). Fibre Bragg Grating-based Acoustic Sensor Array for Improved Condition Monitoring of Marine Lifting Surfaces. Journal of Lightwave Technology, 34(18), pp. 4336-4342. doi: 10.1109/JLT.2016.2601122

Vidakovic, M., McCague, C., Armakolas, I. , Sun, T., Carlton, J. & Grattan, K. T. V. (2016). Fibre Bragg Grating-based Cascaded Acoustic Sensors for Potential Marine Structural Condition Monitoring. Journal of Lightwave Technology, 34(19), pp. 4473-4478. doi: 10.1109/JLT.2016.2587161

Vidal, A., Rodriguez, C., Koukouvinis, P. ORCID: 0000-0002-3945-3707 , Gavaises, M. ORCID: 0000-0003-0874-8534 & McHugh, M. A. (2018). Modelling of Diesel fuel properties through its surrogates using Perturbed-Chain, Statistical Associating Fluid Theory. International Journal of Engine Research, doi: 10.1177/1468087418801712

Vidal Roncero, A. ORCID: 0000-0001-8177-518X, Gavaises, M. ORCID: 0000-0003-0874-8534 & Koukouvinis, P. ORCID: 0000-0002-3945-3707 (2020). Vapor-Liquid Equilibrium calculations at specified composition, density and temperature with the Perturbed Chain Statistical Associating Fluid Theory (PC-SAFT) Equation of State. Fluid Phase Equilibria, 521, 112661.. doi: 10.1016/j.fluid.2020.112661

Vidal Roncero, A. ORCID: 0000-0001-8177-518X, Gavaises, M. ORCID: 0000-0003-0874-8534, Koukouvinis, P. ORCID: 0000-0002-3945-3707 & Rodriguez, C. (2018). Effect of realistic multicomponent diesel surrogates on predicted in-nozzle flow and cavitation. Paper presented at the ICLASS 2018, 22-26 Jul 2018, Chicago, USA.

Vidal Roncero, A. ORCID: 0000-0001-8177-518X, Kolovos, K., Gold, M. , Pearson, R., Koukouvinis, P. ORCID: 0000-0002-3945-3707 & Gavaises, M. ORCID: 0000-0003-0874-8534 (2021). Preferential cavitation and friction-induced heating of multi-component Diesel fuel surrogates up to 450MPa. International Journal of Heat and Mass Transfer, 166, 120744. doi: 10.1016/j.ijheatmasstransfer.2020.120744

Vidal Roncero, A. ORCID: 0000-0001-8177-518X, Koukouvinis, F. ORCID: 0000-0002-3945-3707 & Gavaises, M. ORCID: 0000-0003-0874-8534 (2018). On the effect of realistic multicomponent diesel surrogates on cavitation and in-nozzle flow. Paper presented at the Fuel systems: engines: Inject your ideas, Fuel your technology, 4-5 Dec 2018, London, UK.

Vidal Roncero, A. ORCID: 0000-0001-8177-518X, Koukouvinis, P. ORCID: 0000-0002-3945-3707 & Gavaises, M. ORCID: 0000-0003-0874-8534 (2019). Effect of Diesel injection pressures up to 450MPa on in-nozzle flow using realistic multicomponent surrogates. Paper presented at the ILASS 2019 - 29th European Conference on Liquid Atomization and Spray Systems, 2 - 4 September 2019, Paris, France.

Vidovics, B., Vukasinovic, N., Pavkovic, N. & Kovacevic, A. ORCID: 0000-0002-8732-2242 (2016). Development of methodology for distributed collaborative design environment. In: Proceedings of the 18th International Conference on Engineering and Product Design Education (E&PDE16), Design Education: Collaboration and Cross-Disciplinarity. (pp. 58-63). Glasgow: The Design Society. ISBN 9781904670780

Villoslada, D., Santos, M. & Tomas-Rodriguez, M. ORCID: 0000-0001-9630-9579 (2021). General Methodology for the Identification of Reduced Dynamic Models of Barge-Type Floating Wind Turbines. Energies, 14(13), 3902. doi: 10.3390/en14133902

Villoslada, D., Santos, M. & Tomas-Rodriguez, M. ORCID: 0000-0001-9630-9579 (2022). TMD stroke limiting influence on barge-type floating wind turbines. Ocean Engineering, 248, 110781. doi: 10.1016/j.oceaneng.2022.110781

Vimalakanthan, K., Caboni, M., Schepers, J. G. , Pechenik, E. & Williams, P. (2018). Aerodynamic analysis of Ampyx’s airborne wind energy system. Journal of Physics: Conference Series, 1037(6), 062008.. doi: 10.1088/1742-6596/1037/6/062008

Vimalakanthan, K., Read, M. G. ORCID: 0000-0002-7753-2457 & Kovacevic, A. ORCID: 0000-0002-8732-2242 (2020). Numerical Modelling and Experimental Validation of Twin-Screw Expander. Energies, 13(8), 4700.. doi: 10.3390/en13184700

Vimalakanthan, K., Read, M. G. ORCID: 0000-0002-7753-2457 & Kovacevic, A. ORCID: 0000-0002-8732-2242 (2020). Performance Prediction and Optimisation of Twin-Screw Expander. IIR Rankine Conference 2020, 1146.. doi: 10.18462/iir.rankine.2020.146

Vimalakanthan, K., Schepers, J. G., Shen, W. Z. , Rahimi, H., Micallef, D., Simao Ferreira, C. J., Jost, E. & Klein, L. (2018). Evaluation of different methods of determining the angle of attack on wind turbine blades under yawed inflow conditions. Journal of Physics: Conference Series, 1037(2), 022028.. doi: 10.1088/1742-6596/1037/2/022028

Virdi, A. S., Zhang, Q., He, L. , Li, H. D. & Hunsleys, R. (2015). Aerothermal Performance of Shroudless Turbine Blade Tips with Relative Casing Movement Effects. Journal of Propulsion and Power, 31(2), pp. 527-536. doi: 10.2514/1.B35331

Vlahakis, L. ORCID: 0000-0002-7039-5314 & Halikias, G. ORCID: 0000-0003-1260-1383 (2018). Model-Matching type-methods and Stability of Networks consisting of non-Identical Dynamic Agents. Paper presented at the 7th IFAC Workshop on Distributed Estimation and Control in Networked Systems, 27-28 Aug 2018, Groningen, Netherlands. doi: 10.1016/j.ifacol.2018.12.073

Vocale, P., Dennis, R. & Pullen, K. R. (2011). The SCORE Project: Stove for Cooking, Refrigeration and Electricity. Paper presented at the V Congresso Nazionale AIGE, 08-09 Jun 2012, Modena, Italy.

Vogiatzaki, K., Cleary, M. J., Kronenburg, A. & Kent, J. H. (2009). Modeling of scalar mixing in turbulent jet flames by multiple mapping conditioning. Physics of Fluids, 21(2), 025105. doi: 10.1063/1.3081553

Vogiatzaki, K., Kronenburg, A., Cleary, M. J. & Kent, J. H. (2009). Multiple mapping conditioning of turbulent jet diffusion flames. Proceedings of the Combustion Institute, 32(2), pp. 1679-1685. doi: 10.1016/j.proci.2008.06.164

Vogiatzaki, K., Kronenburg, A., Navarro-Martinez, S. & Jones, W. P. (2011). Stochastic multiple mapping conditioning for a piloted, turbulent jet diffusion flame. Proceedings of the Combustion Institute, 33(1), pp. 1523-1531. doi: 10.1016/j.proci.2010.06.126

Vogiatzaki, K., Navarro-Martinez, S., De, S. & Kronenburg, A. (2015). Mixing modelling framework based on Multiple Mapping Conditioning for the prediction of turbulent flame extinction. Flow, Turbulence and Combustion, 95(2), pp. 501-517. doi: 10.1007/s10494-015-9626-0

van Bokhorst, E. (2018). Forcing of the primary and secondary crossflow instability. (Unpublished Doctoral thesis, City, University of London)

van Bokhorst, E., Placidi, M. & Atkin, C.J. (2016). The influence of the spatial frequency content of discrete roughness distributions on the development of the crossflow instability. In: 8th AIAA Flow Control Conference. . Reston, VA, United States: American Institute of Aeronautics and Astronautics. doi: 10.2514/6.2016-3931

W

Wahrhaftig, A. D. M., Magalhães, K. M. M., Silva, M. A. , da Fonseca Brasil, R. M. L. R. & Banerjee, J. R. (2022). Buckling and free vibration analysis of non-prismatic columns using optimized shape functions and Rayleigh method. European Journal of Mechanics, A/Solids, 94, 104543. doi: 10.1016/j.euromechsol.2022.104543

Wan, K., Manin, J., Sim, H. S. & Karathanassis, I. K. ORCID: 0000-0001-9025-2866 (2022). Soot and PAH formation in high pressure spray pyrolysis of gasoline and diesel fuels. Combustion and Flame, 241, 112084. doi: 10.1016/j.combustflame.2022.112084

Wang, C., Adams, M., Luo, T. , Jin, T., Luo, F. & Gavaises, M. ORCID: 0000-0003-0874-8534 (2020). Hole-to-hole variations in coupled flow and spray simulation of a double-layer multi-holes diesel nozzle. International Journal of Engine Research, doi: 10.1177/1468087420963986

Wang, F., Leboeuf, F., Huang, Y. , Zhou, L. X. & Sayma, A. I. (2010). An algebraic sub-grid scale turbulent combustion model. Paper presented at the ASME Turbo Expo 2010: Power for Land, Sea, and Air, 14-06-2010 - 18-06-2010, Glasgow, UK. doi: 10.1115/GT2010-22033

Wang, F., Sayma, A. I., Peng, Z. J. & Huang, Y. (2011). A multi-section droplet combustion model for spray combustion simulation. Paper presented at the ASME 2011 Turbo Expo: Turbine Technical Conference and Exposition, 06-06-2011 - 10-06-2011, Vancouver, Canada. doi: 10.1115/GT2011-45023

Wang, X., Yan, Y., Sun, Z. & Liu, C. (2014). LES investigation into the generation of momentum deficits in the supersonic wake of a micro-ramp. Journal of Mechanical Science and Technology, 28(4), pp. 1327-1337. doi: 10.1007/s12206-013-1164-x

Wang, X., Yan, Y., Sun, Z. & Liu, C. (2014). The Vortical Structures in the Rear Separation and Wake Produced by a Supersonic Micro-Ramp. Flow, Turbulence and Combustion, 93(1), pp. 25-36. doi: 10.1007/s10494-014-9531-y

Wang, Z., Zhang, Q., Liu, Y. & He, L. (2015). Impact of Cooling Injection on the Transonic Over-Tip Leakage Flow and Squealer Aerothermal Design Optimization. Journal of Engineering for Gas Turbines and Power, 137(6), 062603. doi: 10.1115/1.4029120

Wang, Z., Zhang, Q., Yan, Y. , Liu, K. & Ligrani, P. M. (2017). Secondary flows and extra heat transfer enhancement of ribbed surfaces with jet impingement. Numerical Heat Transfer Part A, 72(9), pp. 669-680. doi: 10.1080/10407782.2017.1394139

White, M. ORCID: 0000-0002-7744-1993 (2021). Cycle and turbine optimisation for an ORC operating with two-phase expansion. Applied Thermal Engineering, 192, 116852. doi: 10.1016/j.applthermaleng.2021.116852

White, M. ORCID: 0000-0002-7744-1993 (2021). Investigating the Validity of the Fundamental Derivative in the Equilibrium and Non-equilibrium Two-Phase Expansion of MM. In: Pini, M., De Servi, C., Spinelli, A. , di Mare, F. & Guardone, A. (Eds.), Proceedings of the 3rd International Seminar on Non-Ideal Compressible Fluid Dynamics for Propulsion and Power. NICFD 2020. ERCOFTAC Series (28). (pp. 3-11). Cham: Springer. ISBN 978-3-030-69305-3 doi: 10.1007/978-3-030-69306-0_1

White, M. ORCID: 0000-0002-7744-1993 (2022). Investigating the wet-to-dry expansion of organic fluids for power generation. International Journal of Heat and Mass Transfer, 192, 122921. doi: 10.1016/j.ijheatmasstransfer.2022.122921

White, M. ORCID: 0000-0002-7744-1993, Bianchi, G., Chai, L. , Tassou, S. A. & Sayma, A. I. ORCID: 0000-0003-2315-0004 (2021). Review of supercritical CO2 technologies and systems for power generation. Applied Thermal Engineering, 185(116447), doi: 10.1016/j.applthermaleng.2020.116447

White, M. ORCID: 0000-0002-7744-1993, Markides, C. & Sayma, A. I. (2017). Working-Fluid replacement in supersonic organic Rankine Cycle Turbines. Journal of Engineering for Gas Turbines and Power,

White, M. ORCID: 0000-0002-7744-1993, Oyewunmi, O. A., Chatzopoulou, M. A. , Pantaleo, A. M., Haslam, A. J. & Markides, C. N. (2018). Computer-aided working-fluid design, thermodynamic optimisation and technoeconomic assessment of ORC systems for waste-heat recovery. Energy, 161, pp. 1181-1198. doi: 10.1016/j.energy.2018.07.098

White, M. ORCID: 0000-0002-7744-1993, Oyewunmi, O. A., Chatzopoulou, M. T. , Pantaleo, A. M., Haslam, A. J. & Markides, C. N. (2017). Integrated computer-aided working-fluid design and thermoeconomic ORC system optimisation. Energy Procedia, 129, pp. 152-159. doi: 10.1016/j.egypro.2017.09.095

White, M. ORCID: 0000-0002-7744-1993, Oyewunmi, O. A., Haslam, A. J. & Markides, C. N. (2017). Industrial waste-heat recovery through integrated computer-aided working-fluid and ORC system optimisation using SAFT-Γ Mie. Energy Conversion and Management, 150, pp. 851-869. doi: 10.1016/j.enconman.2017.03.048

White, M. ORCID: 0000-0002-7744-1993, Read, M. G. & Sayma, A. I. (2019). Comparison between single and cascaded organic Rankine cycle systems accounting for the effects of expansion volume ratio on expander performance. IOP Conference Series: Materials Science and Engineering, 604(1), 012086.. doi: 10.1088/1757-899X/604/1/012086

White, M. ORCID: 0000-0002-7744-1993, Read, M. G. ORCID: 0000-0002-7753-2457 & Sayma, A. I. ORCID: 0000-0003-2315-0004 (2020). Making the case for cascaded organic Rankine cycles for waste-heat recovery. Energy, 211, 118912. doi: 10.1016/j.energy.2020.118912

White, M. ORCID: 0000-0002-7744-1993, Read, M. G. & Sayma, A. I. (2018). Optimisation of cascaded organic Rankine cycle systems for high-temperature waste-heat recovery. Paper presented at the ECOS 2018 - The 31st International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, 17 - 22 June 2018, Guimarães, Portugal.

White, M. ORCID: 0000-0002-7744-1993, Read, M. G. ORCID: 0000-0002-7753-2457 & Sayma, A. I. ORCID: 0000-0003-2315-0004 (2018). Using a cubic equation of state to identify optimal working fluids for an ORC operating with two-phase expansion using a twin-screw expander. Paper presented at the 17th International Refrigeration and Air Conditioning Conference, 09-12 Jul 2018, West Lafayette, USA.

White, M. ORCID: 0000-0002-7744-1993, Read, M. G. ORCID: 0000-0002-7753-2457 & Sayma, A. I. ORCID: 0000-0003-2315-0004 (2019). A comparison between cascaded and single-stage ORC systems taken from the component perspective. In: Sotirios, K. & Kakaras, E. (Eds.), Proceedings of the 5th International Seminar on ORC Power Systems. . Athens: The National Technical University of Athens (NTUA). ISBN 978-90-9032038-0

White, M. ORCID: 0000-0002-7744-1993 & Sayma, A. I. (2015). The Application of Similitude Theory for the Performance Prediction of Radial Turbines Within Small-Scale Low-Temperature Organic Rankine Cycles. Journal of Engineering for Gas Turbines and Power, 137(12), e122605. doi: 10.1115/1.4030836

White, M. ORCID: 0000-0002-7744-1993 & Sayma, A. I. ORCID: 0000-0003-2315-0004 (2018). Design of a closed-loop optical-access supersonic test facility for organic vapours. In: ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition. (V003T28A002). USA: ASME. ISBN 9780791851043 doi: 10.1115/GT2018-75301

White, M. ORCID: 0000-0002-7744-1993 & Sayma, A. I. ORCID: 0000-0003-2315-0004 (2020). Fluid Selection for Small-Scale Rankine Cycle Plants: Can You Draw Some Lines in the Sand?. IIR Rankine Conference 2020, 1161.. doi: 10.18462/iir.rankine.2020.1161

White, M. ORCID: 0000-0002-7744-1993 & Sayma, A. I. (2016). Improving the economy-of-scale of small organic rankine cycle systems through appropriate working fluid selection. Applied Energy, 183, pp. 1227-1239. doi: 10.1016/j.apenergy.2016.09.055

White, M. ORCID: 0000-0002-7744-1993 & Sayma, A. I. (2019). Simultaneous Cycle Optimization and Fluid Selection for ORC Systems Accounting for the Effect of the Operating Conditions on Turbine Efficiency. Frontiers in Energy Research, 7, 50.. doi: 10.3389/fenrg.2019.00050

White, M. ORCID: 0000-0002-7744-1993 & Sayma, A. I. (2015). System and component modelling and optimisation for an efficient 10 kWe low-temperature organic Rankine cycle utilising a radial inflow expander. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 229(7), pp. 795-809. doi: 10.1177/0957650915574211

White, M. ORCID: 0000-0002-7744-1993 & Sayma, A. I. ORCID: 0000-0003-2315-0004 (2018). A generalised assessment of working fluids and radial turbines for organic Rankine cycles. Energies, 11(800), doi: 10.3390/en11040800

White, M. ORCID: 0000-0002-7744-1993 & Sayma, A. I. (2015). The impact of component performance on the overall cycle performance of small-scale low temperature organic Rankine cycles. IOP Conference Series: Materials Science and Engineering, 90(1), e012063. doi: 10.1088/1757-899X/90/1/012063

White, M. ORCID: 0000-0002-7744-1993 & Sayma, A. I. (2020). A new method to identify the optimal temperature of latent-heat thermal-energy storage systems for power generation from waste heat. International Journal of Heat and Mass Transfer, 149, 119111.. doi: 10.1016/j.ijheatmasstransfer.2019.119111

White, M. ORCID: 0000-0002-7744-1993 & Sayma, A. I. (2015). The one-dimensional meanline design of radial turbines for small scale low temperature organic rankine cycles. In: ASME Turbo Expo 2015: Turbine Technical Conference and Exposition. (V02CT42A014). ASME. doi: 10.1115/GT2015-42466

White, M. ORCID: 0000-0002-7744-1993 & Sayma, A. I. ORCID: 0000-0003-2315-0004 (2018). A preliminary comparison of different turbine architectures for a 100 kW supercritical CO2 Rankine cycle turbine. Paper presented at the The 6th International Supercritical CO2 Power Cycles Symposium, 27 - 29 Mar 2018, Pittsburgh, Pennsylvania.

White, M. ORCID: 0000-0002-7744-1993, Sayma, A. I. & Markides, C. (2017). Supersonic flow of non-ideal fluids in nozzles: An application of similitude theory and lessons for ORC turbine design and flexible use considering system performance. Journal of Physics: Conference Series, 821(1), 012002. doi: 10.1088/1742-6596/821/1/012002

White, M. ORCID: 0000-0002-7744-1993 & Turunen-Saaresti, T. (2021). Simulation of a supersonic stator vane under two-phase inlet conditions. Proceedings of the 6th International Seminar on ORC Power Systems, doi: 10.14459/2021mp1632898

Wirasinghe, N E A (1975). Swirling and non-swirling flow in conical diffusers. (Unpublished Doctoral thesis, City, University of London)

Wong, Y. Y. (2019). Developing a cardiac mechanics analysis framework using shell finite elements. (Unpublished Doctoral thesis, City, University of London)

Wu, F., Qian, J., Wu, W. , Ye, Y., Sun, Z., Xu, B., Yang, X., Xu, Y., Zhang, J. & Chen, R. (2017). Boron-doped microporous nano carbon as cathode material for high-performance Li-S batteries. Nano Research, 10(2), pp. 426-436. doi: 10.1007/s12274-016-1303-7

X

Xie, L., Wang, S., Ding, J. , Banerjee, J. R. & Wang, J. (2020). An accurate beam theory and its first-order approximation in free vibration analysis. Journal of Sound and Vibration, 485, 115567. doi: 10.1016/j.jsv.2020.115567

Xu, H., Mughal, S. M., Gowree, E. R. , Atkin, C. J. & Sherwin, S. J. (2017). Destabilisation and modification of Tollmien-Schlichting disturbances by a three-dimensional surface indentation. Journal of Fluid Mechanics, 819, pp. 592-620. doi: 10.1017/jfm.2017.193

Y

Yan, D., Kovacevic, A. ORCID: 0000-0002-8732-2242 & Tang, Q. (2017). Numerical investigation of cavitation in twin-screw pumps. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, doi: 10.1177/0954406217740927

Yan, D., Kovacevic, A. & Tang, Q. (2017). Numerical investigation of flow characteristics in twin-screw pump under cavitating conditions. IOP Conference Series: Materials Science and Engineering, 232(012026), doi: 10.1088/1757-899X/232/1/012026

Yan, D., Kovacevic, A., Tang, Q. & Zhang, W. H. (2016). Numerical modelling of twin-screw pumps based on computational fluid dynamics. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, doi: 10.1177/0954406216670684

Yan, D., Tang, Q., Kovacevic, A. & Pei, L. (2017). Rotor profile design and numerical analysis of 2–3 type multiphase twin-screw pumps. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, doi: 10.1177/0954408917691798

Yan, D., Tang, Q., Kovacevic, A. ORCID: 0000-0002-8732-2242 , Zhang, Y., Liu, W., Liang, P. & Zhang, H. (2020). Designing nano-aluminum laden fuel pump for aviation applications. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 234(6), pp. 634-643. doi: 10.1177/0954408920935315

Yan, S. ORCID: 0000-0001-8968-6616, Li, Q. ORCID: 0000-0001-7456-7868, Wang, J. ORCID: 0000-0003-1821-2362 , Ma, Q. ORCID: 0000-0001-5579-6454, Xie, Z. & Stoesser, T. (2019). Comparative Numerical Study on Focusing Wave Interaction with FPSO-like Structure. International Journal of Offshore and Polar Engineering, 29(2), pp. 119-157. doi: 10.17736/ijope.2019.jc754

Yang, J., Xiao, G., Ghavami, M. ORCID: 0000-0002-0772-7726 , Al-Zaili, J. ORCID: 0000-0003-4072-2107, Yang, T., Sayma, A. I. ORCID: 0000-0003-2315-0004 & Ni, D. (2021). Thermodynamic modelling and real-time control strategies of solar micro gas turbine system with thermochemical energy storage. Journal of Cleaner Production, 304, 127010. doi: 10.1016/j.jclepro.2021.127010

Yang, L., Kovacevic, A. ORCID: 0000-0002-8732-2242 & Read, M. (2019). Normal Rack Grid Generation Method for Screw Machines with Large Helix Angles. IOP Conference Series: Materials Science and Engineering, 604(1), 012011.. ISSN 1757-8981 doi: 10.1088/1757-899X/604/1/012011

Yazdani Nezhad, H. ORCID: 0000-0003-0832-3579, Auffray, A., McCarthy, C. T. & O'Higgins, R. (2015). Impact damage response of carbon fibre-reinforced aerospace composite panels. Paper presented at the 20th International Conference on Composite Materials, 19-24 Jul 2015, Copenhagen, Denmark.

Yazdani Nezhad, H. ORCID: 0000-0003-0832-3579, Egan, B., Merwick, F. & McCarthy, C. T. (2017). Bearing damage characteristics of fibre-reinforced countersunk composite bolted joints subjected to quasi-static shear loading. Composite Structures, 166, pp. 184-192. doi: 10.1016/j.compstruct.2017.01.029

Yazdani Nezhad, H. ORCID: 0000-0003-0832-3579 & O'Dowd, N. P. (2015). Creep relaxation in the presence of residual stress. Engineering Fracture Mechanics, 138, pp. 250-264. doi: 10.1016/j.engfracmech.2015.03.037

Yazdani Nezhad, H. ORCID: 0000-0003-0832-3579, Stratakis, D., Ayre, D. , Addepalli, S. & Zhao, Y. (2018). Mechanical performance of composite bonded joints in the presence of localised process-induced zero-thickness defects. Procedia Manufacturing, 16, pp. 91-98. doi: 10.1016/j.promfg.2018.10.175

Yazdani Nezhad, H. ORCID: 0000-0003-0832-3579 & Thakur, V. K. (2018). Effect of Morphological Changes due to Increasing Carbon Nanoparticles Content on the Quasi-Static Mechanical Response of Epoxy Resin. Polymers (Basel), 10(10), 1106.. doi: 10.3390/polym10101106

Yazdani Nezhad, H. ORCID: 0000-0003-0832-3579, Wang, X., Court, S. , Thapa, B. & Erkoyuncu, J. A. (2020). Development of an Augmented Reality Equipped Composites Bonded Assembly and Repair for Aerospace Applications. Paper presented at the 4th IFAC AMEST 2020, 10-11 Sep 2020, Online.

Ye, F., Bianchi, G., Rane, S. , Tassou, S. A. & Deng, J. (2021). Analytical grid generation and numerical assessment of tip leakage flows in sliding vane rotary machines. Advances in Engineering Software, 159, 103030. doi: 10.1016/j.advengsoft.2021.103030

Ye, F., Bianchi, G., Rane, S. , Tassou, S. A. & Deng, J. (2021). Numerical methodology and CFD simulations of a rotary vane energy recovery device for seawater reverse osmosis desalination systems. Applied Thermal Engineering, 190, doi: 10.1016/j.applthermaleng.2021.116788

Yin, D., Wang, D., Li, W. , Li, X., Zhang, H. & Naher, S. (2017). Development of a new 3D model for the prediction of residual stress and fracture behaviour in Ti-6Al-4V after ultrasonic peening treatment. Journal of Materials Processing Technology, 247, pp. 29-39. doi: 10.1016/j.jmatprotec.2017.03.033

Z

Zavitsas, K., Kaparias, I., Bell, M. G. H. & Nocera, S. (2011). Urban traffic management and Intelligent Transport Systems: A European perspective. Paper presented at the Transportation Research Board 90th Annual Meeting, 23-01-2011 - 27-01-2011, Washington, DC, USA.

Zeng, Q., Gonzalez-Avila, S. R., Dijkink, R. , Koukouvinis, P. ORCID: 0000-0002-3945-3707, Gavaises, M. ORCID: 0000-0003-0874-8534 & Ohl, C-D. (2018). Wall shear stress from jetting cavitation bubbles. Journal of Fluid Mechanics, 846, pp. 341-355. doi: 10.1017/jfm.2018.286

Zhang, K., Ghobadian, A. & Nouri, J. M. (2017). Comparative study of non-premixed and partially-premixed combustion simulations in a realistic Tay model combustor. Applied Thermal Engineering, 110, pp. 910-920. doi: 10.1016/j.applthermaleng.2016.08.223

Zhang, K., Ghobadian, A. & Nouri, J. M.