City Research Online

A

Aboukhedr, M. (2019). Two-Phase Flow Simulation in Porous Media Geometries Reconstructed from micro CT Data : Application to Fluid Transport at Low Capillary Numbers. (Unpublished Doctoral thesis, City, University of London)

Amiryar, M. E. (2019). An assessment of flywheel storage for efficient provision of reliable power for residential premises in islanded operation. (Unpublished Doctoral thesis, City, University of London)

Ananthapuvirajah, A. (2019). Free vibration and flutter behaviour of metallic and composite aircraft using DSM and developments of dynamic stiffness matrices for structural elements with applications. (Unpublished Doctoral thesis, City, University of London)

B

Babazadehrokni, H. B. (2019). Thermo-physical property models for well-characterized hydrocarbon mixtures and fuels and effect of composition on fluid properties up to 4,500 bar. (Unpublished Doctoral thesis, City, University of London)

C

Cattell, R. (2019). An experimental investigation in to a highly forward swept, low specific speed turbocompressor. (Unpublished Doctoral thesis, City, University of London)

D

Dasari, BhagyaLakshmi (2019). Production and characterisation of graphene oxide reinforced aluminium matrix composites. (Unpublished Doctoral thesis, City, University of London)

F

Fumarola, I. (2019). Effect of Freestream Turbulence on the Boundary Layer on a Swept Leading Edge. (Unpublished Doctoral thesis, City, University of London)

K

Kabir, I. R. (2019). Modelling of Laser Surface Glazing for Metallic Materials by Finite Element Method. (Unpublished Doctoral thesis, City, University of London)

L

Laria, D. (2019). Techno-economic assessment of a solar dish micro gas turbine system. (Unpublished Doctoral thesis, City, University of London)

M

Monti, A (2019). High-fidelity simulations of fully submerged, rigid canopy flows. (Unpublished Doctoral thesis, City, University of London)

N

Naseri, Homa (2019). Modelling of nozzle cavitation in newtonian and viscoelastic fluids. (Unpublished Doctoral thesis, City, University of London)

Q

Qaban, A. (2019). The effect of alloying composition and cooling rate on the hot ductility of TWIP steel and mechanical properties of hot rolled HSLA steel. (Unpublished Doctoral thesis, City, University of London)

R

Rodriguez Fernandez, Carlos (2019). Supercritical, transcritical and subcritical real-fluid mixing at high-pressure conditions using the PC-SAFT EoS. (Unpublished Doctoral thesis, City, University of London)

T

Tamanna, N. (2019). Modelling of residual stresses of the laser cladding process. (Unpublished Doctoral thesis, City, University of London)

W

Wong, Y. Y. (2019). Developing a cardiac mechanics analysis framework using shell finite elements. (Unpublished Doctoral thesis, City, University of London)