Items where Author is "Ponnusami, S. A."
Nakka, R., Phanendra Kumar, A., Harursampath, D. & Ponnusami, S. A. ORCID: 0000-0002-2143-8971 (2023).
Influence of fibre cross-section profile on the multi-physical properties of uni-directional composites.
Composite Structures, 321,
117321.
doi: 10.1016/j.compstruct.2023.117321
Aithal, N. U., Mahesh, V., Mahesh, V. ORCID: 0000-0001-8394-1321 , Ponnusami, S. A.
ORCID: 0000-0002-2143-8971 & Harursampath, D. (2023).
Development and mechanical characterization of cenosphere-reinforced CFRP and natural rubber core sandwich composite.
Journal of the Brazilian Society of Mechanical Sciences and Engineering, 45(9),
498.
doi: 10.1007/s40430-023-04424-2
Mahesh, V., Mahesh, V., Ponnusami, S. A. ORCID: 0000-0002-2143-8971 & Harursampath, D. (2023).
Machine learning assisted coupled frequency analysis of skewed multi-phase magnetoelectric composite plates with temperature and moisture dependent properties.
Mechanics of Advanced Materials and Structures,
doi: 10.1080/15376494.2023.2242858
Mahesh, V. ORCID: 0000-0001-8394-1321, Mahesh, V. & Ponnusami, S. A.
ORCID: 0000-0002-2143-8971 (2023).
Nonlinear active control of thermally induced pyro-coupled vibrations in porous-agglomerated CNT core sandwich plate with magneto-piezo-elastic facings.
Acta Mechanica,
doi: 10.1007/s00707-023-03641-z
Mahesh, V. ORCID: 0000-0001-8394-1321, George, J. P., Mahesh, V. , Chakraborthy, H., Mukunda, S. & Ponnusami, S. A.
ORCID: 0000-0002-2143-8971 (2023).
Dry-sliding wear properties of 3D printed PETG/SCF/OMMT nanocomposites: Experimentation and model predictions using artificial neural network.
Journal of Reinforced Plastics and Composites,
doi: 10.1177/07316844231188853
Bedi, S. S., Mallesha, V., Mahesh, V. , Mahesh, V. & Ponnusami, S. A. ORCID: 0000-0002-2143-8971 (2023).
Investigation of low-percentage graphene reinforcement on the mechanical behaviour of additively manufactured polyethylene terephthalate glycol composites.
Journal of Thermoplastic Composite Materials,
doi: 10.1177/08927057231188025
Bedi, S. S., Mallesha, V., Mahesh, V. ORCID: 0000-0001-8394-1321 , Mahesh, V., Mukunda, S., Negi, S. & Ponnusami, S. A.
ORCID: 0000-0002-2143-8971 (2023).
Thermal characterization of 3D printable multifunctional graphene‐reinforced polyethylene terephthalate glycol (PETG) composite filaments enabled for smart structural applications.
Polymer Engineering & Science,
doi: 10.1002/pen.26409
Nakka, R., Harursampath, D. & Ponnusami, S. A. ORCID: 0000-0002-2143-8971 (2023).
A generalised deep learning-based surrogate model for homogenisation utilising material property encoding and physics-based bounds.
Scientific Reports, 13(1),
9079.
doi: 10.1038/s41598-023-34823-3
Sahu, R., Harursampath, D. & Ponnusami, S. A. ORCID: 0000-0002-2143-8971 (2023).
Continuum modeling of nonlinear buckling behavior of CNT using variational asymptotic method and nonlinear FEA.
Mechanics of Advanced Materials and Structures,
doi: 10.1080/15376494.2023.2211971
Mahesh, V., Mahesh, V. & Ponnusami, S. A. ORCID: 0000-0002-2143-8971 (2023).
FEM-ANN approach to predict nonlinear pyro-coupled deflection of sandwich plates with agglomerated porous nanocomposite core and piezo-magneto-elastic facings in thermal environment.
Mechanics of Advanced Materials and Structures,
doi: 10.1080/15376494.2023.2201927
Kumthekar, A., Ponnusami, S. A. ORCID: 0000-0002-2143-8971, van der Zwaag, S. & Turteltaub, S. (2022).
Uncertainty quantification of the lifetime of self-healing thermal barrier coatings based on surrogate modelling of thermal cyclic fracture and healing.
Materials and Design, 221,
110973.
doi: 10.1016/j.matdes.2022.110973
Ponnusami, S. A. ORCID: 0000-0002-2143-8971, Cui, H., Erice, B. , Lißner, M., Pathan, M. & Petrinic, N. (2022).
An integrated inverse numerical–experimental approach to determine the dynamic Mode-I interlaminar fracture toughness of fibre composites.
Composite Structures, 293,
115734.
doi: 10.1016/j.compstruct.2022.115734
Nakka, R., Harursampath, D., Pathan, M. V. & Ponnusami, S. A. ORCID: 0000-0002-2143-8971 (2022).
A computationally efficient approach for generating RVEs of various inclusion/fiber shapes.
Composite Structures, 291,
115560.
doi: 10.1016/j.compstruct.2022.115560
Ponnusami, S. A. ORCID: 0000-0002-2143-8971, Krishnasamy, J., Turteltaub, S. & van der Zwaag, S. (2022).
Elucidating the effect of cohesive zone length in fracture simulations of particulate composites.
Engineering Fracture Mechanics, 268,
108431.
doi: 10.1016/j.engfracmech.2022.108431
De Bianchi, F., Ponnusami, S. A. ORCID: 0000-0002-2143-8971, Silvestroni, L. & Grande, A. M. (2021).
Thermo-elastic properties in short fibre reinforced ultra-high temperature ceramic matrix composites: Characterisation and numerical assessment.
Materials Today Communications, 29,
102754.
doi: 10.1016/j.mtcomm.2021.102754
Veerasamy, D., Atkin, C.J. & Ponnusami, S. A. ORCID: 0000-0002-2143-8971 (2021).
Aerofoil wake-induced transition characteristics on a flat-plate boundary layer.
Journal of Fluid Mechanics, 920,
A29.
doi: 10.1017/jfm.2021.452
Krishnasamy, J., Ponnusami, S. A. ORCID: 0000-0002-2143-8971, Turteltaub, S. & van der Zwaag, S. (2021).
Thermal cyclic behavior and lifetime prediction of self-healing thermal barrier coatings.
International Journal of Solids and Structures, 222-23,
111034.
doi: 10.1016/j.ijsolstr.2021.03.021
Narayana, K. J., Burela, R. G., Ponnusami, S. A. ORCID: 0000-0002-2143-8971 & Harursampath, D. (2020).
Geometric nonlinear analysis of composite stiffened panels using variational asymptotic method.
AIAA Journal, 58(9),
doi: 10.2514/1.J058963
Krishnasamy, J., Ponnusami, S. A. ORCID: 0000-0002-2143-8971, Turteltaub, S. & van der Zwaag, S. (2019).
Numerical Investigation into the Effect of Splats and Pores on the Thermal Fracture of Air Plasma-Sprayed Thermal Barrier Coatings.
Journal of Thermal Spray Technology,
doi: 10.1007/s11666-019-00949-y
Cui, H., Mahadik, Y., Hallett, S. R. , Partridge, I. K., Allegri, G., Ponnusami, S. A. & Petrinic, N. (2019). Coupon scale Z-pinned IM7/8552 delamination tests under dynamic loading. Composites Part A: Applied Science and Manufacturing, 125, 105565. doi: 10.1016/j.compositesa.2019.105565
Pathan, M. V., Ponnusami, S. A. ORCID: 0000-0002-2143-8971, Pathan, J. , Pitisongsawat, R., Erice, B., Petrinic, N. & Tagarielli, V. L. (2019).
Predictions of the mechanical properties of unidirectional fibre composites by supervised machine learning.
Scientific Reports, 9(1),
13964.
doi: 10.1038/s41598-019-50144-w
Ponnusami, S. A. ORCID: 0000-0002-2143-8971, Krishnasamy, J., Turteltaub, S. & van der Zwaag, S. (2019).
A micromechanical fracture analysis to investigate the effect of healing particles on the overall mechanical response of a self-healing particulate composite.
Fatigue and Fracture of Engineering Materials and Structures, 42(2),
pp. 533-545.
doi: 10.1111/ffe.12929
Krishnasamy, J., Ponnusami, S. A. ORCID: 0000-0002-2143-8971, Turteltaub, S. & van der Zwaag, S. (2019).
Computational investigation of porosity effects on fracture behavior of thermal barrier coatings.
Ceramics International, 45(16),
pp. 20518-20527.
doi: 10.1016/j.ceramint.2019.07.031
Ponnusami, S. A. ORCID: 0000-0002-2143-8971, Gupta, M. & Harursampath, D. (2019).
Asymptotic Modeling of Nonlinear Bending and Buckling Behavior of Carbon Nanotubes.
AIAA Journal, 57(10),
pp. 4132-4140.
doi: 10.2514/1.j057564
Krishnasamy, J., Ponnusami, S. A., Turteltaub, S. & van der Zwaag, S. (2018). Modelling the fracture behaviour of thermal barrier coatings containing healing particles. Materials & Design, 157, pp. 75-86. doi: 10.1016/j.matdes.2018.07.026
Pathan, M. V., Erice, B., Ponnusami, S. A. & Petrinic, N. (2018). Experimental characterisation of rate-dependent compression behaviour of fibre reinforced composites. EPJ Web of Conferences, 183, 2053. doi: 10.1051/epjconf/201818302053
Ponnusami, S. A. ORCID: 0000-0002-2143-8971, Krishnasamy, J., Turteltaub, S. & van der Zwaag, S. (2018).
A cohesive-zone crack healing model for self-healing materials.
International Journal of Solids and Structures, 134,
pp. 249-263.
doi: 10.1016/j.ijsolstr.2017.11.004
Erice, B., Thomson, D., Ponnusami, S. A. , Pathan, M. V. & Petrinic, N. (2018). On the Rate-dependent Plasticity Modelling of Unidirectional Fibre-reinforced Polymeric Matrix Composites. EPJ Web of Conferences, 183, 1055. doi: 10.1051/epjconf/201818301055
Ponnusami, S. A. ORCID: 0000-0002-2143-8971, Cui, H., Erice, B. , Pathan, M. V. & Petrinic, N. (2018).
A Wedge-DCB Test Methodology to Characterise High Rate Mode-I Interlaminar Fracture Properties of Fibre Composites.
EPJ Web of Conferences, 183,
2052.
doi: 10.1051/epjconf/201818302052
Ponnusami, S. A., Turteltaub, S. & van der Zwaag, S. (2015). Cohesive-zone modelling of crack nucleation and propagation in particulate composites. Engineering Fracture Mechanics, 149, pp. 170-190. doi: 10.1016/j.engfracmech.2015.09.050
Blonde, R., Jimenez-Melero, E., Ponnusami, S. A. , Zhao, L., Schell, N., Bruck, E., van der Zwaag, S. & van Dijk, N. (2014). Position-dependent shear-induced austenite-martensite transformation in double-notched TRIP and dual-phase steel samples. Journal Of Applied Crystallography, 47, pp. 956-964. doi: 10.1107/S1600576714006712