City Research Online

Patil, S., Abdan, S., Asati, N. , Stosic, N. ORCID: 0000-0001-8034-4046 & Kovacevic, A. ORCID: 0000-0002-8732-2242view all authors (2023). Improvement of Screw Compressor Performance by Rotor Profile Modification to Reduce Mechanical Losses. In: Energy. ASME 2023 International Mechanical Engineering Congress and Exposition, 29 Oct - 2 Nov 2023, New Orleans, USA. doi: 10.1115/imece2023-112721

Abdan, S., Patil, S., Stosic, N. ORCID: 0000-0001-8034-4046 , Kovacevic, A. ORCID: 0000-0002-8732-2242 & Smith, I.view all authors (2023). Experimental validation of the screw compressor oil drag model for various rotor profiles. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 238(6), pp. 2740-2749. doi: 10.1177/09544089231163514

Abdan, S., Stosic, N. ORCID: 0000-0001-8034-4046, Kovacevic, A. ORCID: 0000-0002-8732-2242 , Smith, I. & Asati, N.view all authors (2022). Oil drag loss in oil-flooded, twin-screw compressors. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 237(4), pp. 1137-1144. doi: 10.1177/09544089221115493

Rane, S., Kovacevic, A. ORCID: 0000-0002-8732-2242, Stosic, N. ORCID: 0000-0001-8034-4046 & Smith, I.view all authors (2021). Analysis of real gas equation of state for CFD modelling of twin screw expanders with R245fa, R290, R1336mzz(Z) and R1233zd(E). International Journal of Refrigeration, 121, pp. 313-326. doi: 10.1016/j.ijrefrig.2020.10.022

Read, M. G. ORCID: 0000-0002-7753-2457, Smith, I. K. & Stosic, N. ORCID: 0000-0001-8034-4046 (2020). Influence of rotor geometry on tip leakage and port flow areas in gerotor-type twin screw compressors. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 236(1), pp. 94-102. doi: 10.1177/0954408920962412

Nouri, J. M. ORCID: 0000-0001-8610-3737, Guerrato, D. & Stosic, N. (2019). Turbulent Flow Measurements near the Discharge Port of a Screw Compressor. Flow, Turbulence and Combustion, 104(4), pp. 927-946. doi: 10.1007/s10494-019-00080-6

Abdan, S., Stosic, N., Kovacevic, A. ORCID: 0000-0002-8732-2242 , Smith, I. K. ORCID: 0000-0003-1524-9880 & Asati, N.view all authors (2019). Analysis of rolling bearing power loss models for twin screw oil injected compressor. In: IOP Conference Series: Materials Science and Engineering. doi: 10.1088/1757-899X/604/1/012013

Abdan, S., Basha, N., Kovacevic, A. ORCID: 0000-0002-8732-2242 , Stosic, N., Birari, A. & Asati, N.view all authors (2019). Development and Design of Energy Efficient Oil-Flooded Screw Compressors. In: IOP Conference Series: Materials Science and Engineering. doi: 10.1088/1757-899X/604/1/012015

Stosic, N., Smith, I. K. & Kovacevic, A. ORCID: 0000-0002-8732-2242 (2019). Improving Screw Compressor Displacement and Efficiency by Increasing the Rotor Profile Depth. In: IOP Conference Series: Materials Science and Engineering. doi: 10.1088/1757-899X/604/1/011012

Stosic, N. (2019). Operation and performance of screw machines with high built-in volume ratio. IOP Conference Series: Materials Science and Engineering, 604(1), doi: 10.1088/1757-899X/604/1/012014

Nouri, J. M. ORCID: 0000-0001-8610-3737, Stosic, N. & Guerrato, D. (2019). Investigation of turbulent flow characteristics within screw compressor. In: 4th International Conference on Multi-scale Computational Methods for Solids and Fluids. 4th International Conference on Computational Methods for Solids and Fluids, 18-20 Sep 2019, Sarajevo, Bosnia and Herzegovina.

Read, M. G. ORCID: 0000-0002-7753-2457, Smith, I. K. ORCID: 0000-0003-1524-9880 & Stosic, N. (2019). Geometrical Comparison of Conventional and Gerotor-Type Positive Displacement Screw Machines. IOP Conference Series: Materials Science and Engineering, 604(1), article number 1. doi: 10.1088/1757-899X/604/1/011011

Basha, N., Kovacevic, A. ORCID: 0000-0002-8732-2242, Stosic, N. & Smith, I. K.view all authors (2018). Effect of oil-injection on twin screw compressor performance. IOP Conference Series: Materials Science and Engineering, 425(1), article number 12009. doi: 10.1088/1757-899X/425/1/012009

Abdan, S., Stosic, N., Kovacevic, A. ORCID: 0000-0002-8732-2242 , Smith, I. K. & Deore, P.view all authors (2018). Identification and analysis of screw compressor mechanical losses. IOP Conference Series: Materials Science and Engineering, 425(1), article number 12015. doi: 10.1088/1757-899X/425/1/012015

Read, M. G. ORCID: 0000-0002-7753-2457, Stosic, N. & Smith, I. K. ORCID: 0000-0003-1524-9880 (2017). Geometrical aspects of novel internally geared screw machine. In: Refrigeration Science and Technology. Compressors 2017 - 9th International Conference on Compressors and Coolants, 6-9 Sept 2017, Bratislava, Slovakia. doi: 10.18462/iir.compr.2017.0241

Read, M. G., Smith, I. K. & Stosic, N. (2017). Internally geared screw machines with ported end plates. IOP Conference Series: Materials Science and Engineering, 232(1), article number 012058. doi: 10.1088/1757-899x/232/1/012058

Kovacevic, A., Stosic, N. & Smith, I. K. (2017). Editorial. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 231(1), p. 3. doi: 10.1177/0954408916685022

Read, M. G. ORCID: 0000-0002-7753-2457, Stosic, N. & Smith, I. K. ORCID: 0000-0003-1524-9880 (2017). Operational characteristics of internally geared positive displacement screw machines. In: ASME 2017 International Mechanical Engineering Congress and Exposition. doi: 10.1115/IMECE2017-70228

Read, M. G., Smith, I. K. & Stosic, N. (2017). Optimisation of power generation cycles using saturated liquid expansion to maximise heat recovery. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 231(1), pp. 57-69. doi: 10.1177/0954408916679202

Mujic, E., Stosic, N., Kovacevic, A. & Smith, I. K.view all authors (2016). Noise Control by Suppression of Gas Pulsation in Screw Compressors. In: Ahmed, N. (Ed.), Advances in Noise Analysis, Mitigation and Control. . InTech. doi: 10.5772/64795

Read, M. G., Smith, I. K., Stosic, N. & Kovacevic, A.view all authors (2016). Comparison of organic rankine cycle systems under varying conditions using turbine and twin-screw expanders. Energies, 9(8), article number 614. doi: 10.3390/en9080614

Kovacevic, A. & Stosic, N. (2016). CFD Analysis of Oil Flooded Twin Screw Compressors. Paper presented at the 23rd International Compressor Engineering Conference, 11-14 Jul 2016, Indiana, USA.

Read, M. G., Smith, I. K. & Stosic, N. (2016). Fundamental Investigation Of Whole-Life Power Plant Performance For Enhanced Geothermal Systems. In: 23rd International Compressor Engineering Conference at Purdue 2016. . Red Hook, NY: Curran Associates, Inc.

Chukanova, E., Stosic, N. & Kovacevic, A. ORCID: 0000-0002-8732-2242 (2016). Modelling and Experimental Investigation of Compressor Plant Operation Under Unsteady Conditions. In: ASME 2015 International Mechanical Engineering Congress and Exposition, Volume 4A: Dynamics, Vibration, and Control. ASME 2015 International Mechanical Engineering Congress and Exposition, 13 - 19 November 2015, Houston, Texas, USA.

Buckney, D., Kovacevic, A. & Stosic, N. (2016). Design and evaluation of rotor clearances for oil-injected screw compressors. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 231(1), pp. 26-37. doi: 10.1177/0954408916660342

Stosic, N., Rane, S., Kovacevic, A. ORCID: 0000-0002-8732-2242 & Smith, I. K. ORCID: 0000-0003-1524-9880view all authors (2016). Screw Rotor Profiles of Variable Lead Vacuum and Multiphase Machines and Their Calculation Models. In: ASME 2016 International Mechanical Engineering Congress and Exposition, Volume 6A: Energy. ASME 2016 International Mechanical Engineering Congress and Exposition, 11 - 17 November 2016, Phoenix, Arizona, USA. doi: 10.1115/IMECE2016-66314

Kovacevic, A. & Stosic, N. (2015). Analytical Grid Generation for accurate representation of clearances in CFD for Screw Machines. IOP Conference Series: Materials Science and Engineering, 90(1), article number 012008. doi: 10.1088/1757-899x/90/1/012008

Arjeneh, M., Kovacevic, A., Manolis, M. & Stosic, N.view all authors (2015). Numerical and Experimental Investigation of Pressure Losses at Suction of a Twin Screw Compressor. IOP Conference Series: Materials Science and Engineering, 90(1), article number 012006. doi: 10.1088/1757-899x/90/1/012006

Read, M. G., Smith, I. K. & Stosic, N. (2015). Optimisation of two-stage screw expanders for waste heat recovery applications. IOP Conference Series: Materials Science and Engineering, 90(1), article number 012058. doi: 10.1088/1757-899x/90/1/012058

Buckney, D., Kovacevic, A. & Stosic, N. (2015). Rotor clearance design and evaluation for an oil injected twin screw compressor. IOP Conference Series: Materials Science and Engineering, 90(1), article number 012003. doi: 10.1088/1757-899x/90/1/012003

Read, M. G., Smith, I. K. & Stosic, N. (2015). Comparison of Organic Rankine Cycle Under Varying Conditions Using Turbine and Twin-Screw Expanders. In: Lemort, V, Quoilin, S, De Paepe, M & van de broek, Mview all authors (Eds.), Proceedings of the 3rd International Seminar on ORC Power Systems. 3rd International Seminar on ORC Power Systems, 12-14 Oct 2015, Brussels, Belgium.

Read, M. G., Stosic, N. & Smith, I. K. (2014). Optimization of Screw Expanders for Power Recovery From Low-Grade Heat Sources. Energy Technology & Policy, 1(1), pp. 131-142. doi: 10.1080/23317000.2014.969454

Kovacevic, A., Stosic, N., Jiang, Y. , Furmanczyk, M. & Lowry, S.view all authors (2014). Influence of approaches in CFD Solvers on Performance Prediction in Screw Compressors. In: http://docs.lib.purdue.edu/icec/2252. 22nd International Compressor Engineering Conference, 14-17 Jul 2014, West Lafayette, USA.

Arjeneh, M., Kovacevic, A. ORCID: 0000-0002-8732-2242, Stosic, N. & Gavaises, M. ORCID: 0000-0003-0874-8534view all authors (2014). Study of Multiphase Flow at the Suction of Screw Compressor. In: http://docs.lib.purdue.edu/icec/2319. 22nd International Compressor Engineering Conference at Purdue 2014, 14 - 17 July 2014, West Lafayette, Indiana.

Read, M. G., Smith, I. & Stosic, N. (2014). Effect of air temperature variation on the performance of wet vapour organic rankine cycle systems. Geothermal Resources Council Transactions, 38, pp. 705-712.

Rane, S., Kovacevic, A., Stosic, N. & Kethidi, M.view all authors (2014). Deforming grid generation and CFD analysis of variable geometry screw compressors. Computers and Fluids, 99, pp. 124-141. doi: 10.1016/j.compfluid.2014.04.024

Read, M. G., Smith, I. K. & Stosic, N. (2014). Multi-Variable Optimisation of Wet Vapour Organic Rankine Cycles with Twin-Screw Expanders. Paper presented at the 22nd International Compressor Engineering Conference, 14-17 Jul 2014, Perdue, France.

Rane, S., Kovacevic, A., Stosic, N. & Kethidi, M.view all authors (2013). Grid deformation strategies for CFD analysis of screw compressors. International Journal of Refrigeration, 36(7), pp. 1883-1893. doi: 10.1016/j.ijrefrig.2013.04.008

Stosic, N., Smith, I. K., Chukanova, E. & Kovacevic, A.view all authors (2013). Experimental Investigation and Numerical Modelling of Dynamic Behaviour of Screw Compressor Plant. Universal Journal of Engineering Science, 1(3), pp. 68-79. doi: 10.13189/ujes.2013.010302

Rane, S., Kovacevic, A., Stosic, N. & Kethidi, M.view all authors (2013). CFD grid generation and analysis of screw compressor with variable geometry rotors. In: 8th International Conference on Compressors and their Systems. (pp. 601-612). Cambridge: Woodhead Publishing.

Buckney, D., Kovacevic, A. & Stosic, N. (2013). Experimental validation of a geometry model for twin screw machines. In: 8th International Conference on Compressors and their Systems. (pp. 237-246). Cambridge: Woodhead Publishing.

Kovacevic, A. & Stosic, N. (2013). Grid Generation for Screw Compressors with Variable Geometry Rotors. International Journal of Aerospace and Lightweight Structures, 3(2), doi: 10.3850/s2010428613000603

Chukanova, E., Stosic, N. & Kovacevic, A. (2013). Numerical analysis of unsteady behaviour of a screw compressor plant system. In: 8th International Conference on Compressors and their Systems. (pp. 129-139). Cambridge: Woodhead Publishing.

Stosic, N., Smith, I. K. ORCID: 0000-0003-1524-9880 & Kovacevic, A. ORCID: 0000-0002-8732-2242 (2012). Numerical and experimental research in heat transfer to screw compressor rotors. Frontiers in Heat and Mass Transfer, 3(2), article number 23003. doi: 10.5098/hmt.v3.2.3003

Ous, T., Mujic, E. & Stosic, N. (2012). Experimental investigation on water injected twin screw compressor for fuel cell humidification. Proceedings of the Institution of Mechanical Engineers, Part C, Journal of Mechanical Engineering Science, 226(12), pp. 2925-2932. doi: 10.1177/0954406212438323

Kovacevic, A., Mujic, E., Stosic, N. & Smith, I. K.view all authors (2011). Extending the Role of Computational Fluid Dynamics in Screw Machines. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 225(2), pp. 1-15. doi: 10.1177/0954408910397586

Stosic, N., Smith, I. K. ORCID: 0000-0003-1524-9880, Kovacevic, A. ORCID: 0000-0002-8732-2242 & Mujic, E.view all authors (2011). Geometry of screw compressor rotors and their tools. Journal of Zhejiang University-SCIENCE A, 12(4), pp. 310-326. doi: 10.1631/jzus.a1000393

Mujic, E., Kovacevic, A., Stosic, N. & Smith, I. K.view all authors (2011). Noise generation and suppression in twin screw compressors. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 225(2), pp. 127-148. doi: 10.1177/1464419311403875

Stosic, N., Smith, I., Kovacevic, A. & Mujic, E.view all authors (2011). Review of Mathematical Models in Performance Calculation of Screw Compressors. International Journal of Fluid Machinery and Systems, 4(2), pp. 271-288. doi: 10.5293/ijfms.2011.4.2.271

Smith, I. K., Stosic, N., Mujic, E. & Kovacevic, A.view all authors (2011). Steam as the working fluid for power recovery from exhaust gases by means of screw expanders. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 225(2), pp. 117-125. doi: 10.1177/2041300910393429

Stosic, N., Smith, I. K. & Kovacevic, A. (2009). Steam as the Working Fluid for Power Recovery from Exhaust Gases by Means of Screw Expanders. Paper presented at the International Conference on Compressors and Their Systems, 07-09-2009 - 09-09-2009, London, England.

Guerrato, D., Nouri, J. M., Stosic, N. , Arcoumanis, C. & Smith, I. K.view all authors (2008). Flow measurements in the discharge port of a screw compressor. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 222(4), pp. 201-210. doi: 10.1243/09544089jpme200

Mujic, E., Kovacevic, A., Stosic, N. & Smith, I. K.view all authors (2008). The influence of port shape on gas pulsations in a screw compressor discharge chamber. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 222(4), pp. 211-223. doi: 10.1243/09544089jpme205

Nouri, J. M., Guerrato, D., Stosic, N. & Arcoumanis, C.view all authors (2008). Axial Flow Characteristics within a Screw Compressor. HVAC&R Research, 14(2), pp. 259-274. doi: 10.1080/10789669.2008.10391007

Kovacevic, A. ORCID: 0000-0002-8732-2242, Stosic, N., Mujic, E. & Smith, I. K. ORCID: 0000-0003-1524-9880view all authors (2007). CFD Integrated Design of Screw Compressors. Engineering Applications of Computational Fluid Mechanics, 1(2), pp. 96-108. doi: 10.1080/19942060.2007.11015185

Kovacevic, A. ORCID: 0000-0002-8732-2242, Stosic, N. & Smith, I. K. ORCID: 0000-0003-1524-9880 (2004). A numerical study of fluid-solid interaction in screw compressors. International Journal on Computer Application in Technology, 21(4), pp. 148-158. doi: 10.1504/ijcat.2004.006651

Stosic, N., Smith, I. K. ORCID: 0000-0003-1524-9880 & Kovacevic, A. ORCID: 0000-0002-8732-2242 (2003). Optimisation of screw compressors. Applied Thermal Engineering, 23(10), pp. 1177-1195. doi: 10.1016/S1359-4311(03)00059-0

Stosic, N., Smith, I. K. ORCID: 0000-0003-1524-9880 & Kovacevic, A. ORCID: 0000-0002-8732-2242 (2003). Rotor interference as a criterion for screw compressor design. Journal of Engineering Design, 14(2), pp. 209-220. doi: 10.1080/0954482031000091518

Stosic, N., Kovacevic, A. ORCID: 0000-0002-8732-2242 & Smith, I. K. ORCID: 0000-0003-1524-9880 (2003). Three Dimensional Numerical Analysis of Screw Compressor Performance. Journal of Computer Methods in Applied Mechanics and Engineering, 3(2), pp. 259-284. doi: 10.3233/jcm-2003-3206

Hanjalic, K. & Stosic, N. (1978). Some aspects of laboratory testing and computer modelling of two-stage compressors with inter and after-cooling. Proceedings of the IMechE Conference on Design and Operarion of Industrial Compressors, pp. 11-18.