Article

Nouri, J. M. ORCID: 0000-0001-8610-3737, Guerrato, D. and Stosic, N. (2019). Turbulent Flow Measurements near the Discharge Port of a Screw Compressor. Flow, Turbulence and Combustion, doi: 10.1007/s10494-019-00080-6

Stosic, N. (2019). Operation and performance of screw machines with high built-in volume ratio. IOP Conference Series: Materials Science and Engineering, 604(1), doi: 10.1088/1757-899X/604/1/012014

Read, M. G. ORCID: 0000-0002-7753-2457, Smith, I. K. ORCID: 0000-0003-1524-9880 and Stosic, N. (2019). Geometrical Comparison of Conventional and Gerotor-Type Positive Displacement Screw Machines. IOP Conference Series: Materials Science and Engineering, 604(1), 1-.. doi: 10.1088/1757-899X/604/1/011011

Basha, N., Kovacevic, A. ORCID: 0000-0002-8732-2242, Stosic, N. and Smith, I. K. (2018). Effect of oil-injection on twin screw compressor performance. IOP Conference Series: Materials Science and Engineering, 425(1), 012009.. doi: 10.1088/1757-899X/425/1/012009

Abdan, S., Stosic, N., Kovacevic, A. ORCID: 0000-0002-8732-2242, Smith, I. K. and Deore, P. (2018). Identification and analysis of screw compressor mechanical losses. IOP Conference Series: Materials Science and Engineering, 425(1), 012015. doi: 10.1088/1757-899X/425/1/012015

Read, M. G., Smith, I. K. and Stosic, N. (2017). Internally geared screw machines with ported end plates. IOP Conference Series: Materials Science and Engineering, 232(01205), doi: 10.1088/1757-899X/232/1/012058

Kovacevic, A., Stosic, N. and Smith, I. K. (2017). Editorial. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 231(1), p. 3. doi: 10.1177/0954408916685022

Read, M. G., Smith, I. K. and Stosic, N. (2017). Optimisation of power generation cycles using saturated liquid expansion to maximise heat recovery. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 231(1), pp. 57-69. doi: 10.1177/0954408916679202

Read, M. G., Smith, I. K., Stosic, N. and Kovacevic, A. (2016). Comparison of organic rankine cycle systems under varying conditions using turbine and twin-screw expanders. Energies, 9(8), 614.. doi: 10.3390/en9080614

Buckney, D., Kovacevic, A. and Stosic, N. (2016). Design and evaluation of rotor clearances for oil-injected screw compressors. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 231(1), pp. 26-37. doi: 10.1177/0954408916660342

Kovacevic, A. and Stosic, N. (2015). Analytical Grid Generation for accurate representation of clearances in CFD for Screw Machines. IOP Conference Series: Materials Science and Engineering, 90(1), 012008. doi: 10.1088/1757-899X/90/1/012008

Arjeneh, M., Kovacevic, A., Manolis, M. and Stosic, N. (2015). Numerical and Experimental Investigation of Pressure Losses at Suction of a Twin Screw Compressor. IOP Conference Series: Materials Science and Engineering, 90(1), 012006. doi: 10.1088/1757-899X/90/1/012006

Read, M. G., Smith, I. K. and Stosic, N. (2015). Optimisation of two-stage screw expanders for waste heat recovery applications. IOP Conference Series: Materials Science and Engineering, 90(1), 012058. doi: 10.1088/1757-899X/90/1/012058

Buckney, D., Kovacevic, A. and Stosic, N. (2015). Rotor clearance design and evaluation for an oil injected twin screw compressor. IOP Conference Series: Materials Science and Engineering, 90(1), 012003. doi: 10.1088/1757-899X/90/1/012003

Read, M. G., Stosic, N. and Smith, I. K. (2014). Optimization of Screw Expanders for Power Recovery From Low-Grade Heat Sources. Energy Technology & Policy, 1(1), pp. 131-142. doi: 10.1080/23317000.2014.969454

Kovacevic, A., Stosic, N. and Kethidi, M. (2014). Deforming grid generation and CFD analysis of variable geometry screw compressors. Computers & Fluids, 99, pp. 124-141. doi: 10.1016/j.compfluid.2014.04.024

Read, M. G., Smith, I. and Stosic, N. (2014). Effect of air temperature variation on the performance of wet vapour organic rankine cycle systems. Geothermal Resources Council Transactions, 38, pp. 705-712.

Rane, S., Kovacevic, A., Stosic, N. and Kethidi, M. (2013). Grid deformation strategies for CFD analysis of screw compressors. International Journal of Refrigeration, 36(7), pp. 1883-1893. doi: 10.1016/j.ijrefrig.2013.04.008

Stosic, N., Smith, I. K., Chukanova, E. and Kovacevic, A. (2013). Experimental Investigation and Numerical Modelling of Dynamic Behaviour of Screw Compressor Plant. Universal Journal of Engineering Science, 1, pp. 68-79. doi: 10.13189/ujes.2013.010302

Kovacevic, A. and Stosic, N. (2013). Grid Generation for Screw Compressors with Variable Geometry Rotors. International Journal of Aerospace and Lightweight Structures, 3(2), doi: 10.3850/S2010428613000603

Stosic, N., Smith, I. K. ORCID: 0000-0003-1524-9880 and Kovacevic, A. ORCID: 0000-0002-8732-2242 (2012). Numerical and experimental research in heat transfer to screw compressor rotors. Frontiers in Heat and Mass Transfer, 3(2), 023003.. doi: 10.5098/hmt.v3.2.3003

Ous, T., Mujic, E. and Stosic, N. (2012). Experimental investigation on water injected twin screw compressor for fuel cell humidification. Proceedings of the Institution of Mechanical Engineers, Part C, Journal of Mechanical Engineering Science, 226(2), pp. 2925-2932. doi: 10.1177/0954406212438323

Stosic, N., Smith, I. K. ORCID: 0000-0003-1524-9880, Kovacevic, A. ORCID: 0000-0002-8732-2242 and Mujic, E. (2011). Geometry of screw compressor rotors and their tools. Journal of Zhejiang University-SCIENCE A, 12(4), pp. 310-326. doi: 10.1631/jzus.A1000393

Kovacevic, A., Mujic, E., Stosic, N. and Smith, I. K. (2011). Extending the Role of Computational Fluid Dynamics in Screw Machines. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 225(2), pp. 83-97. doi: 10.1177/0954408910397586

Mujic, E., Kovacevic, A., Stosic, N. and Smith, I. K. (2011). Noise generation and suppression in twin screw compressors. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 225(2), pp. 127-148. doi: 10.1177/1464419311403875

Stosic, N., Smith, I., Kovacevic, A. and Mujic, E. (2011). Review of Mathematical Models in Performance Calculation of Screw Compressors. International Journal of Fluid Machinery and Systems, 4(2), pp. 271-288. doi: 10.5293/IJFMS.2011.4.2.271

Smith, I. K., Stosic, N., Mujic, E. and Kovacevic, A. (2011). Steam as the working fluid for power recovery from exhaust gases by means of screw expanders. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 225(2), pp. 117-125. doi: 10.1177/2041300910393429

Guerrato, D., Nouri, J. M., Stosic, N., Arcoumanis, C. and Smith, I. K. (2008). Flow measurements in the discharge port of a screw compressor. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 222(E4), pp. 201-210. doi: 10.1243/09544089JPME200

Mujic, E., Kovacevic, A., Stosic, N. and Smith, I. K. (2008). The influence of port shape on gas pulsations in a screw compressor discharge chamber. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 222(4), pp. 211-223. doi: 10.1243/09544089JPME205

Nouri, J. M., Guerrato, D., Stosic, N. and Arcoumanis, C. (2008). Axial Flow Characteristics within a Screw Compressor. HVAC&R Research, 14(2), pp. 259-274. doi: 10.1080/10789669.2008.10391007

Kovacevic, A. ORCID: 0000-0002-8732-2242, Stosic, N., Mujic, E. and Smith, I. K. ORCID: 0000-0003-1524-9880 (2007). CFD Integrated Design of Screw Compressors. Engineering Applications of Computational Fluid Mechanics, 1(2), pp. 96-108. doi: 10.1080/19942060.2007.11015185

Kovacevic, A. ORCID: 0000-0002-8732-2242, Stosic, N. and Smith, I. K. ORCID: 0000-0003-1524-9880 (2004). A numerical study of fluid-solid interaction in screw compressors. International Journal on Computer Application in Technology, 21(4), pp. 148-158. doi: 10.1504/IJCAT.2004.006651

Stosic, N., Smith, I. K. ORCID: 0000-0003-1524-9880 and Kovacevic, A. ORCID: 0000-0002-8732-2242 (2003). Optimisation of screw compressors. Applied Thermal Engineering, 23(10), pp. 1177-1195. doi: 10.1016/S1359-4311(03)00059-0

Stosic, N., Smith, I. K. ORCID: 0000-0003-1524-9880 and Kovacevic, A. ORCID: 0000-0002-8732-2242 (2003). Rotor interference as a criterion for screw compressor design. Journal of Engineering Design, 14(2), pp. 209-220. doi: 10.1080/0954482031000091518

Stosic, N., Kovacevic, A. ORCID: 0000-0002-8732-2242 and Smith, I. K. ORCID: 0000-0003-1524-9880 (2003). Three Dimensional Numerical Analysis of Screw Compressor Performance. Journal of Computer Methods in Applied Mechanics and Engineering, 3(2), pp. 259-284. doi: 10.3233/JCM-2003-3206

Hanjalic, K. and Stosic, N. (1978). Some aspects of laboratory testing and computer modelling of two-stage compressors with inter and after-cooling. Proceedings of the IMechE Conference on Design and Operarion of Industrial Compressors, pp. 11-19.

Book Section

Read, M. G. ORCID: 0000-0002-7753-2457, Stosic, N. and Smith, I. K. ORCID: 0000-0003-1524-9880 (2017). Operational characteristics of internally geared positive displacement screw machines. In: ASME 2017 International Mechanical Engineering Congress and Exposition. (V006T08A032). USA: ASME. ISBN 9780791858417

Mujic, E., Stosic, N., Kovacevic, A. and Smith, I. K. (2016). Noise Control by Suppression of Gas Pulsation in Screw Compressors. In: Ahmed, N. (Ed.), Advances in Noise Analysis, Mitigation and Control. . InTech. ISBN 978-953-51-2675-1

Read, M. G., Smith, I. K. and Stosic, N. (2016). Fundamental Investigation Of Whole-Life Power Plant Performance For Enhanced Geothermal Systems. In: 23rd International Compressor Engineering Conference at Purdue 2016. . Red Hook, NY: Curran Associates, Inc. ISBN 9781510828728

Rane, S., Kovacevic, A., Stosic, N. and Kethidi, M. (2013). CFD grid generation and analysis of screw compressor with variable geometry rotors. In: 8th International Conference on Compressors and their Systems. (pp. 601-612). Cambridge: Woodhead Publishing. ISBN 9781782421696

Buckney, D., Kovacevic, A. and Stosic, N. (2013). Experimental validation of a geometry model for twin screw machines. In: 8th International Conference on Compressors and their Systems. (pp. 237-246). Cambridge: Woodhead Publishing. ISBN 9781782421696

Chukanova, E., Stosic, N. and Kovacevic, A. (2013). Numerical analysis of unsteady behaviour of a screw compressor plant system. In: 8th International Conference on Compressors and their Systems. (pp. 129-139). Cambridge: Woodhead Publishing. ISBN 9781782421696

Conference or Workshop Item

Abdan, S., Stosic, N., Kovacevic, A. ORCID: 0000-0002-8732-2242, Smith, I. K. ORCID: 0000-0003-1524-9880 and Asati, N. (2019). Analysis of rolling bearing power loss models for twin screw oil injected compressor. IOP Conference Series: Materials Science and Engineering, 604(1), 012013.. doi: 10.1088/1757-899X/604/1/012013 ISSN 1757-8981

Abdan, S., Basha, N., Kovacevic, A. ORCID: 0000-0002-8732-2242, Stosic, N., Birari, A. and Asati, N. (2019). Development and Design of Energy Efficient Oil-Flooded Screw Compressors. IOP Conference Series: Materials Science and Engineering, 604(1), 012015. doi: 10.1088/1757-899X/604/1/012015 ISSN 1757-8981

Stosic, N., Smith, I. K. and Kovacevic, A. ORCID: 0000-0002-8732-2242 (2019). Improving Screw Compressor Displacement and Efficiency by Increasing the Rotor Profile Depth. IOP Conference Series: Materials Science and Engineering, 604(1), 011012.. doi: 10.1088/1757-899X/604/1/011012 ISSN 1757-8981

Nouri, J. M. ORCID: 0000-0001-8610-3737, Stosic, N. and Guerrato, D. (2019). Investigation of turbulent flow characteristics within screw compressor. In: 4th International Conference on Multi-scale Computational Methods for Solids and Fluids. (pp. 193-196). Bosnia and Herzegovina: Faculty of Civil Engineering, University of Sarajevo. ISBN 978-9958-638-57-2

Read, M. G. ORCID: 0000-0002-7753-2457, Stosic, N. and Smith, I. K. ORCID: 0000-0003-1524-9880 (2017). Geometrical aspects of novel internally geared screw machine. Paper presented at the Compressors 2017 - 9th International Conference on Compressors and Coolants, 6-9 Sept 2017, Bratislava, Slovakia.

Kovacevic, A. and Stosic, N. (2016). CFD Analysis of Oil Flooded Twin Screw Compressors. Paper presented at the 23rd International Compressor Engineering Conference, 11-14 Jul 2016, Indiana, USA.

Chukanova, E., Stosic, N. and Kovacevic, A. ORCID: 0000-0002-8732-2242 (2016). Modelling and Experimental Investigation of Compressor Plant Operation Under Unsteady Conditions. In: ASME 2015 International Mechanical Engineering Congress and Exposition, Volume 4A: Dynamics, Vibration, and Control. . ASME. ISBN 978-0-7918-5739-7

Stosic, N., Rane, S., Kovacevic, A. ORCID: 0000-0002-8732-2242 and Smith, I. K. ORCID: 0000-0003-1524-9880 (2016). Screw Rotor Profiles of Variable Lead Vacuum and Multiphase Machines and Their Calculation Models. In: ASME 2016 International Mechanical Engineering Congress and Exposition, Volume 6A: Energy. . ASME. ISBN 978-0-7918-5058-9

Read, M. G., Smith, I. K. and Stosic, N. (2015). Comparison of Organic Rankine Cycle Under Varying Conditions Using Turbine and Twin-Screw Expanders. Paper presented at the 3rd International Seminar on ORC Power Systems, 12-14 Oct 2015, Brussels, Belgium.

Kovacevic, A., Stosic, N., Jiang, Y., Furmanczyk, M. and Lowry, S. (2014). Influence of approaches in CFD Solvers on Performance Prediction in Screw Compressors. Paper presented at the 22nd International Compressor Engineering Conference, 14-17 Jul 2014, West Lafayette, USA.

Arjeneh, M., Kovacevic, A. ORCID: 0000-0002-8732-2242, Stosic, N. and Gavaises, M. ORCID: 0000-0003-0874-8534 (2014). Study of Multiphase Flow at the Suction of Screw Compressor. Paper presented at the 22nd International Compressor Engineering Conference at Purdue 2014, 14 - 17 July 2014, West Lafayette, Indiana.

Read, M. G., Smith, I. K. and Stosic, N. (2014). Multi-Variable Optimisation of Wet Vapour Organic Rankine Cycles with Twin-Screw Expanders. Paper presented at the 22nd International Compressor Engineering Conference, 14-17 Jul 2014, Perdue, France.

Stosic, N., Smith, I. K. and Kovacevic, A. (2009). Steam as the Working Fluid for Power Recovery from Exhaust Gases by Means of Screw Expanders. Paper presented at the International Conference on Compressors and Their Systems, 07-09-2009 - 09-09-2009, London, England.