City Research Online

Items where City Author is "Zhang, Qiang"

Up a level
Group by: Type | No Grouping
Number of items: 20.

Article

Xi, Y., Peng, X., Xia, H. , Sun, Z. & Zhang, Q. ORCID: 0000-0003-0982-2986 (2022). Entropy Generation of Secondary Flow in a Turning Passage with Different Boundary Layer Characteristics. Aerospace, 9(10), article number 539. doi: 10.3390/aerospace9100539

Zhang, Z., Li, Q. ORCID: 0000-0001-7456-7868, Bruecker, C. ORCID: 0000-0001-5834-3020 & Zhang, Q. ORCID: 0000-0003-0982-2986 (2022). Enhanced Thermal Performance with High-Amplitude Intermittent Impingement Cooling. International Journal of Heat and Mass Transfer, 185, article number 122359. doi: 10.1016/j.ijheatmasstransfer.2021.122359

Tran, S. N., Garcez, A., Weyde, T. ORCID: 0000-0001-8028-9905 , Yin, J., Zhang, Q. ORCID: 0000-0003-0982-2986 & Karunanithi, M. (2020). Sequence Classification Restricted Boltzmann Machines With Gated Units. IEEE Transactions on Neural Networks and Learning Systems, 31(11), pp. 4806-4815. doi: 10.1109/tnnls.2019.2958103

Iaria, D., Zhou, X., Al Zaili, J. ORCID: 0000-0003-4072-2107 , Zhang, Q., Xiao, G. & Sayma, A. I. (2019). Development of a Model for Performance Analysis of a Honeycomb Thermal Energy Storage for Solar Power Microturbine Applications. Energies, 12(20), article number 3968. doi: 10.3390/en12203968

Miao, X., Zhang, Q. ORCID: 0000-0003-0982-2986, Atkin, C.J. ORCID: 0000-0003-2529-1978 , Sun, Z. & Li, Y. (2018). Improving Purge Air Cooling Effectiveness by Engineered End-Wall Surface Structures-Part I: Duct Flow. Journal Of Turbomachinery, 140(9), pp. 1-12. doi: 10.1115/1.4040853

Jiang, H., He, L., Zhang, Q. & Wang, L. (2018). On scaling method to investigate high-speed over-tip-leakage flow at low-speed condition. Journal of Engineering for Gas Turbines and Power, 140(6), article number 062605. doi: 10.1115/1.4038619

Miao, X., Zhang, Q. ORCID: 0000-0003-0982-2986, Atkin, C.J. ORCID: 0000-0003-2529-1978 , Sun, Z. & Li, Y. (2018). Improving Purge Air Cooling Effectiveness by Engineered End-Wall Surface Structures-Part II: Turbine Cascade. Journal Of Turbomachinery, 140(9), article number 091002. doi: 10.1115/1.4040854

Wang, Z., Zhang, Q., Yan, Y. , Liu, K. & Ligrani, P. M. (2017). Secondary flows and extra heat transfer enhancement of ribbed surfaces with jet impingement. Numerical Heat Transfer Part A, 72(9), pp. 669-680. doi: 10.1080/10407782.2017.1394139

Zhong, F., Zhou, C., Ma, H. & Zhang, Q. (2017). Heat Transfer of Winglet Tips in a Transonic Turbine Cascade. Journal of Engineering for Gas Turbines and Power, 139(1), article number 012605. doi: 10.1115/1.4034208

Ma, H., Wang, Z., Wang, L. , Zhang, Q., Yang, Z. & Bao, Y. (2016). Ramp heating in high-speed transient thermal measurement with reduced uncertainty. Journal of Propulsion and Power, 32(5), pp. 1190-1198. doi: 10.2514/1.b35803

Qian, W., Rosic, B., Zhang, Q. & Khanal, B. (2016). Influence of fluid temperature gradient on the flow within the shaft gap of a PLR pump. Heat and Mass Transfer/Waerme- und Stoffuebertragung, 52(3), pp. 469-481. doi: 10.1007/s00231-015-1570-y

Jiang, H., Chen, W., Zhang, Q. & He, L. (2015). Analytical-Solution Based Corner Correction for Transient Thermal Measurement. Journal of Heat Transfer, 137(11), article number 111302. doi: 10.1115/1.4030980

Wang, Z., Zhang, Q., Liu, Y. & He, L. (2015). Impact of Cooling Injection on the Transonic Over-Tip Leakage Flow and Squealer Aerothermal Design Optimization. Journal of Engineering for Gas Turbines and Power, 137(6), article number 062603. doi: 10.1115/1.4029120

Virdi, A. S., Zhang, Q., He, L. , Li, H. D. & Hunsleys, R. (2015). Aerothermal Performance of Shroudless Turbine Blade Tips with Relative Casing Movement Effects. Journal of Propulsion and Power, 31(2), pp. 527-536. doi: 10.2514/1.b35331

Miao, X., Zhang, Q., Wang, L. , Jiang, H. & Qi, H. (2015). Application of riblets on turbine blade endwall secondary flow control. Journal of Propulsion and Power, 31(6), pp. 1578-1585. doi: 10.2514/1.b35549

Zhang, Q. & He, L. (2014). Impact of wall temperature on turbine blade tip aerothermal performance. Journal of Engineering for Gas Turbines and Power, 136(5), article number 52602. doi: 10.1115/1.4026001

Zhang, Q. & He, L. (2013). Tip-shaping for HP turbine blade aerothermal performance management. Journal of Turbomachinery, 135(5), doi: 10.1115/1.4007896

Zhang, Q., D'Dowd, D., Wheeler, A. P. S. , He, L., Ligrani, P. & Cheong, B. C. Y. (2011). Over-tip shock wave structure and its impact on turbine blade heat transfer. Journal of Turbomachinery, 133(4), article number 41001. doi: 10.1115/1.4002949

Zhang, Q. & He, L. (2011). Over-Tip Choking and Its Implications on Turbine Blade Tip Aerodynamic Performance. Journal of Propulsion and Power, 27(5), pp. 1008-1014. doi: 10.2514/1.b34112

Conference or Workshop Item

Miao, X., Zhang, Q., Jiang, H. & Qi, H. (2014). Application of riblets on turbine blade endwall secondary flow control. Paper presented at the ASME Turbo Expo 2014: Turbine Technical Conference and Exposition, 16-06-2014 - 20-06-2014, Dusseldorf, Germany. doi: 10.1115/GT2014-26823

This list was generated on Sun Oct 13 02:32:00 2024 UTC.