Thermomechanical modelling of laser surface glazing for H13 tool steel

Kabir, I. R., Yin, D., Tamanna, N. & Naher, S. (2018). Thermomechanical modelling of laser surface glazing for H13 tool steel. Applied Physics A: Materials Science & Processing, 124(3), doi: 10.1007/s00339-018-1671-9

[img]
Preview
Text - Published Version
Available under License Creative Commons Attribution.

Download (1MB) | Preview

Abstract

A two-dimensional thermomechanical finite element (FE) model of laser surface glazing (LSG) has been developed for H13 tool steel. The direct coupling technique of ANSYS 17.2 (APDL) has been utilised to solve the transient thermomechanical process. A H13 tool steel cylindrical cross-section has been modelled for laser power 200 W and 300 W at constant 0.2 mm beam width and 0.15 ms residence time. The model can predict temperature distribution, stress–strain increments in elastic and plastic region with time and space. The crack formation tendency also can be assumed by analysing the von Mises stress in the heat-concentrated zone. Isotropic and kinematic hardening models have been applied separately to predict the after-yield phenomena. At 200 W laser power, the peak surface temperature achieved is 1520 K which is below the melting point (1727 K) of H13 tool steel. For laser power 300 W, the peak surface temperature is 2523 K. Tensile residual stresses on surface have been found after cooling, which are in agreement with literature. Isotropic model shows higher residual stress that increases with laser power. Conversely, kinematic model gives lower residual stress which decreases with laser power. Therefore, both plasticity models could work in LSG for H13 tool steel.

Publication Type: Article
Additional Information: © The Author(s) 2018. This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.
Departments: School of Mathematics, Computer Science & Engineering > Engineering
School of Mathematics, Computer Science & Engineering > Engineering > Mechanical Engineering & Aeronautics
URI: http://openaccess.city.ac.uk/id/eprint/19599

Actions (login required)

View Item View Item

Downloads

Downloads per month over past year

View more statistics