![]() | Up a level |
Mahmoud, M., Ramadan, M., Naher, S. ORCID: 0000-0003-2047-5807, Pullen, K. R.
ORCID: 0000-0001-8501-9226 and Olabi, A-G. (2020).
The impacts of different heating systems on the environment: A review.
Science of The Total Environment,
doi: 10.1016/j.scitotenv.2020.142625
Mahmoud, M., Ramadan, M., Naher, S. ORCID: 0000-0003-2047-5807, Pullen, K. R.
ORCID: 0000-0001-8501-9226, Baroutaji, A. and Olabi, A-G. (2020).
Recent advances in district energy systems: A review.
Thermal Science and Engineering Progress,
doi: 10.1016/j.tsep.2020.100678
Qaban, A. ORCID: 0000-0003-2982-8429, Mohmed, T., Quazi, M. M. and Naher, S.
ORCID: 0000-0003-2047-5807 (2020).
The effect of Al and Nb contents, cooling rate and rolling condition on the microstructure and corrosion behaviour of HSLA steel.
Materials Today Communications,
101362..
doi: 10.1016/j.mtcomm.2020.101362
Mahmoud, M., Ramadan, M., Olabi, A-G., Pullen, K. R. ORCID: 0000-0001-8501-9226 and Naher, S.
ORCID: 0000-0003-2047-5807 (2020).
A review of mechanical energy storage systems combined with wind and solar applications.
Energy Conversion and Management, 210,
p. 112670.
doi: 10.1016/j.enconman.2020.112670
Barrie, M., Qaban, A. ORCID: 0000-0003-2982-8429 and Naher, S.
ORCID: 0000-0003-2047-5807 (2020).
The influence of Widmanstätten ferrite, martensite and grain boundary carbides on the strength and impact behaviour of high Al (0.2%) and Nb containing hot rolled steels.
Materials and design, 109,
108601..
doi: 10.1016/j.matdes.2020.108601
Mintz, B., Qaban, A. ORCID: 0000-0003-2982-8429, Bendke, P. and Naher, S.
ORCID: 0000-0003-2047-5807 (2019).
The influence of a high aluminium addition on the strength and impact behaviour of hot-rolled Nb containing steels.
Materials Science and Technology,
doi: 10.1080/02670836.2019.1701272
Tamanna, N., Crouch, R.S. and Naher, S. ORCID: 0000-0003-2047-5807 (2019).
Progress in Numerical Simulation of the Laser Cladding Process.
Optics and Lasers in Engineering, 122,
pp. 151-163.
doi: 10.1016/j.optlaseng.2019.05.026
Liu, J., Silveira, J., Groarke, R., Parab, S., Singh, H., McCarthy, E., Karazi, S., Mussatto, A., Houghtaling, J., Ahad, I. U., Naher, S. ORCID: 0000-0003-2047-5807 and Brabazon, D. (2019).
Effect of powder metallurgy synthesis parameters for pure aluminium on resultant mechanical properties.
International Journal of Material Forming, 12(1),
pp. 79-87.
doi: 10.1007/s12289-018-1408-5
Qaban, A. ORCID: 0000-0003-2982-8429 and Naher, S.
ORCID: 0000-0003-2047-5807 (2019).
Evaluation of Toughness of High Strength Low Alloy (HSLA) Steels as a Function of Carbon Content.
International Journal of Mechanical and Production Engineering (IJMPE), 7(5),
pp. 53-56.
Qaban, A. ORCID: 0000-0003-2982-8429 and Naher, S.
ORCID: 0000-0003-2047-5807 (2019).
Investigation of corrosion resistance of high-strength low-alloy (HSLA) steel in fresh and salt water for pipeline application.
AIP Conference Proceedings, 2146,
020021..
doi: 10.1063/1.5123708
Dasari, B. L., Brabazon, D. and Naher, S. ORCID: 0000-0003-2047-5807 (2019).
Prediction of Mechanical Properties of Graphene Oxide Reinforced Aluminum Composites.
Metals, 9(10),
p. 1077.
doi: 10.3390/met9101077
Dasari, B. L., Morshed, M.M., Nouri, J. M. ORCID: 0000-0001-8610-3737, Brabazon, D. and Naher, S. (2018).
Mechanical properties of graphene oxide reinforced aluminium matrix composites.
Composites Part B: Engineering, 145,
pp. 136-144.
doi: 10.1016/j.compositesb.2018.03.022
Qaban, A. and Naher, S. ORCID: 0000-0003-2047-5807 (2018).
Influence of Al content on the corrosion resistance of micro-alloyed hot rolled steel as a function of grain size.
AIP Conference Proceedings, 1960,
040017..
doi: 10.1063/1.5034871
Kabir, I. R., Yin, D., Tamanna, N. and Naher, S. ORCID: 0000-0003-2047-5807 (2018).
Thermomechanical modelling of laser surface glazing for H13 tool steel.
Applied Physics A: Materials Science & Processing, 124(3),
doi: 10.1007/s00339-018-1671-9
Tamanna, N., Crouch, R.S., Kabir, I. R. and Naher, S. (2018). An Analytical Model to Predict and Minimize the Residual Stress of Laser Cladding Process. Applied Physics A: Materials Science & Processing, doi: 10.1007/s00339-018-1585-6
Dasari, B. L., Nouri, J. M., Brabazon, D. and Naher, S. (2017). Graphene and derivatives – Synthesis techniques, properties and their energy applications. Energy, 140(1), pp. 766-778. doi: 10.1016/j.energy.2017.08.048
Kabir, I. R., Yin, D. and Naher, S. ORCID: 0000-0003-2047-5807 (2017).
3D Thermal Model of Laser Surface Glazing for H13 Tool Steel.
AIP Conference Proceedings, 1896,
130003..
doi: 10.1063/1.5008152
Qaban, A., Mintz, B. and Naher, S. (2017). Hot rolled high Al containing steels as a replacement for the control rolled high strength low alloy (HSLA) steels. AIP Conference Proceedings, 1896(1), 010001.. doi: 10.1063/1.5008156
Tamanna, N., Crouch, R.S. and Naher, S. ORCID: 0000-0003-2047-5807 (2017).
A One-dimensional Analysis of the Distribution of Temperature, Stress and Strain in the co-axial Laser Cladding Process.
AIP Conference Proceedings, 1896,
040015..
doi: 10.1063/1.5008041
Dasari, B. L., Nouri, J. M., Brabazon, D. and Naher, S. (2017). Parametric study for graphene reinforced aluminum matrix composites production using Box Behnken design. AIP Conference Proceedings, 1896(1), 130006.. doi: 10.1063/1.5008155
Kabir, I. R., Yin, D., Tamanna, N. and Naher, S. ORCID: 0000-0003-2047-5807 (2017).
3D Thermal Model of Laser Surface Glazing for Ti6Al4V alloy.
Applied Sciences,
Qaban, A., Mintz, B., Kang, S. E. and Naher, S. (2017). Hot ductility of high Al TWIP steels containing Nb and Nb-V. Materials Science and Technology, 33(14), pp. 1645-1656. doi: 10.1080/02670836.2017.1309097
Yin, D., Wang, D., Li, W., Li, X., Zhang, H. and Naher, S. (2017). Development of a new 3D model for the prediction of residual stress and fracture behaviour in Ti-6Al-4V after ultrasonic peening treatment. Journal of Materials Processing Technology, 247, pp. 29-39. doi: 10.1016/j.jmatprotec.2017.03.033
Liu, J., Khan, U., Coleman, J., Fernandez, B., Rodriguez, P., Naher, S. and Brabazon, B. (2016). Graphene Oxide and Graphene Nanosheet Reinforced Aluminium Matrix Composites: powder synthesis and prepared composite characteristics. Materials & Design, 94, pp. 87-94. doi: 10.1016/j.matdes.2016.01.031
Kabir, I. R., Yin, D. and Naher, S. (2016). Two dimensional finite element thermal model of laser surface glazing for H13 tool steel. AIP Conference Proceedings, 1769(1), p. 110003. doi: 10.1063/1.4963512
Naher, S., Ahmad, A.H. and Brabazon, D. (2014). Direct thermal method of aluminium 7075. Advanced Materials Research, 939, pp. 400-408. doi: 10.4028/www.scientific.net/AMR.939.400
Ahmad, A.H., Naher, S. and Brabazon, D. (2014). Injection tests and effect on microstructure and properties of aluminium 7075 direct thermal method feedstock billets. Key Engineering Materials, 611, pp. 1637-1644. doi: 10.4028/www.scientific.net/KEM.611-612.1637
Ahmad, A.H., Naher, S. and Brabazon, D. (2014). The effect of direct thermal method, temperature and time on microstructure of a cast aluminum alloy. Materials and Manufacturing Processes, 29(2), pp. 134-139. doi: 10.1080/10426914.2013.822980
Lipowiecki, M., Ryvolova, M., Toettoesi, A., Kolmer, N., Naher, S., Brennan, S.A., Vazquez, M. and Brabazon, D. (2014). Permeability of rapid prototyped artificial bone scaffold structures. Journal of Biomedical Materials Research Part A, 102(11), pp. 4127-4135. doi: 10.1002/jbm.a.35084
Aqida, S.N., Brabazon, D. and Naher, S. (2012). Atomic diffusion in laser surface modified AISI H13 steel. Applied Physics A: Materials Science & Processing, 112(1), pp. 139-142. doi: 10.1007/s00339-012-7214-x
Aqida, S.N, Brabazon, D. and Naher, S. (2012). An investigation of phase transformation and crystallinity in laser surface modified H13 steel. Applied Physics A: Materials Science & Processing, 110(3), pp. 673-678. doi: 10.1007/s00339-012-7149-2
Chikarakara, E., Naher, S. and Brabazon, D. (2012). High speed laser surface modification of Ti-6Al-4V. Surface and Coatings Technology, 206(14), pp. 3223-3229. doi: 10.1016/j.surfcoat.2012.01.010
Naher, S., Orpen, D., Brabazon, D., Poulsen, C.R. and Morshed, M.M. (2010). Effect of micro-channel geometry on fluid flow and mixing. Simulation Modelling Practice and Theory, 19(4), pp. 1088-1095. doi: 10.1016/j.simpat.2010.12.008
Aqida, S.N., Calosso, F., Brabazon, D., Naher, S. and Rosso, M. (2010). Thermal fatigue properties of laser treated steels. International Journal of Material Forming, 3(S1), pp. 797-800. doi: 10.1007/s12289-010-0890-1
Laksmi, B., Nouri, J. M., Brabazon, D. and Naher, S. (2015). Prediction of properties for the production and application of graphene reinforced metal matrix composites. Paper presented at the 8th International Conference on Sustainable Energy & Environmental Protection (SEEP 2015), 11-14 August 2015, University of the West of Scotland, Paisley.