Items where Author is "Read, M. G."
Article
Read, M. G. 
ORCID: 0000-0002-7753-2457, Smith, I. K. & Stosic, N. ORCID: 0000-0001-8034-4046 (2020).
Influence of rotor geometry on tip leakage and port flow areas in gerotor-type twin screw compressors.
Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 236(1),
pp. 94-102.
doi: 10.1177/0954408920962412
White, M. ORCID: 0000-0002-7744-1993, Read, M. G. ORCID: 0000-0002-7753-2457 & Sayma, A. I. ORCID: 0000-0003-2315-0004 (2020).
Making the case for cascaded organic Rankine cycles for waste-heat recovery.
Energy, 211,
article number 118912.
doi: 10.1016/j.energy.2020.118912
Vimalakanthan, K., Read, M. G. ORCID: 0000-0002-7753-2457 & Kovacevic, A. ORCID: 0000-0002-8732-2242 (2020).
Numerical Modelling and Experimental Validation of Twin-Screw Expander.
Energies, 13(18),
article number 4700.
doi: 10.3390/en13184700
Read, M. G. ORCID: 0000-0002-7753-2457, Stosic, N. & Smith, I. K. (2020).
The influence of rotor geometry on power transfer between rotors in gerotor-type screw compressors.
Journal of Mechanical Design, 142(7),
pp. 1-11.
doi: 10.1115/1.4045508
Vimalakanthan, K., Read, M. G. ORCID: 0000-0002-7753-2457 & Kovacevic, A. ORCID: 0000-0002-8732-2242 (2020).
Performance Prediction and Optimisation of Twin-Screw Expander.
IIR Rankine Conference 2020,
article number 1146.
doi: 10.18462/iir.rankine.2020.146
White, M. ORCID: 0000-0002-7744-1993, Read, M. G. & Sayma, A. I. (2019).
Comparison between single and cascaded organic Rankine cycle systems accounting for the effects of expansion volume ratio on expander performance.
IOP Conference Series: Materials Science and Engineering, 604(1),
article number 12086.
doi: 10.1088/1757-899X/604/1/012086
Read, M. G. ORCID: 0000-0002-7753-2457, Smith, I. K. ORCID: 0000-0003-1524-9880 & Stosic, N. (2019).
Geometrical Comparison of Conventional and Gerotor-Type Positive Displacement Screw Machines.
IOP Conference Series: Materials Science and Engineering, 604(1),
article number 1.
doi: 10.1088/1757-899X/604/1/011011
Lu, Y., Kovacevic, A. ORCID: 0000-0002-8732-2242, Read, M. G. ORCID: 0000-0002-7753-2457 & Basha, N (2019).
Numerical study of customised mesh for twin screw vacuum pumps.
Designs, 3(4),
article number 52.
doi: 10.3390/designs3040052
Lu, Y., Kovacevic, A. ORCID: 0000-0002-8732-2242 & Read, M. G. ORCID: 0000-0002-7753-2457 (2018).
Numerical study on screw machines with large helix angles.
IOP Conference Series: Materials Science and Engineering, 425(1),
article number 12015.
doi: 10.1088/1757-899X/425/1/012023
Read, M. G., Smith, I. K. & Stosic, N. (2017). Internally geared screw machines with ported end plates. IOP Conference Series: Materials Science and Engineering, 232(1), article number 012058. doi: 10.1088/1757-899x/232/1/012058
Read, M. G., Smith, I. K. & Stosic, N. (2017). Optimisation of power generation cycles using saturated liquid expansion to maximise heat recovery. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 231(1), pp. 57-69. doi: 10.1177/0954408916679202
Pullen, K. R. ORCID: 0000-0001-8501-9226, Read, M. G. ORCID: 0000-0002-7753-2457, Sellick, R. , Fenocchi, A. & Etemad, S. (2016).
Efficiency Benefits from the Deployment of a Novel Flywheel Solution for Non-Electrified Lines.
International Journal of Railway Technology, 5(4),
pp. 79-100.
doi: 10.4203/ijrt.5.4.4
Read, M. G., Smith, I. K., Stosic, N. & Kovacevic, A. (2016). Comparison of organic rankine cycle systems under varying conditions using turbine and twin-screw expanders. Energies, 9(8), article number 614. doi: 10.3390/en9080614
Read, M. G., Smith, R. & Pullen, K. R. (2015). Optimisation of flywheel energy storage systems with geared transmission for hybrid vehicles. Mechanism and Machine Theory, 87, pp. 191-209. doi: 10.1016/j.mechmachtheory.2014.11.001
Read, M. G., Smith, I. K. & Stosic, N. (2015). Optimisation of two-stage screw expanders for waste heat recovery applications. IOP Conference Series: Materials Science and Engineering, 90(1), article number 012058. doi: 10.1088/1757-899x/90/1/012058
Read, M. G., Stosic, N. & Smith, I. K. (2014). Optimization of Screw Expanders for Power Recovery From Low-Grade Heat Sources. Energy Technology & Policy, 1(1), pp. 131-142. doi: 10.1080/23317000.2014.969454
Read, M. G., Smith, I. & Stosic, N. (2014). Effect of air temperature variation on the performance of wet vapour organic rankine cycle systems. Geothermal Resources Council Transactions, 38, pp. 705-712.
Book Section
Read, M. G., Smith, I. K. & Stosic, N. (2016). Fundamental Investigation Of Whole-Life Power Plant Performance For Enhanced Geothermal Systems. In: 23rd International Compressor Engineering Conference at Purdue 2016. . Red Hook, NY: Curran Associates, Inc.
Conference or Workshop Item
Read, M. G. ORCID: 0000-0002-7753-2457 (2021).
Basic design procedure for an internally geared screw compressor.
In:
IOP Conference Series: Materials Science and Engineering.
12th International Conference on Compressors and their Systems (Compressors 2021), 6-8 Sep 2021, London, United Kingdom.
doi: 10.1088/1757-899x/1180/1/012055
Lu, Y., Kovacevic, A., Read, M. G. ORCID: 0000-0002-7753-2457 , Buckney, D. & Endo, Y. (2021).
Investigation of Screw Compressors for Low Pressure Ratio Applications.
In:
IOP Conference Series: Materials Science and Engineering.
12th International Conference on Compressors and their Systems (Compressors 2021), 6-8 Sep 2021, London, United Kingdom.
doi: 10.1088/1757-899x/1180/1/012006
White, M. ORCID: 0000-0002-7744-1993, Read, M. G. ORCID: 0000-0002-7753-2457 & Sayma, A. I. ORCID: 0000-0003-2315-0004 (2019).
A comparison between cascaded and single-stage ORC systems taken from the component perspective.
In: Sotirios, K. & Kakaras, E. (Eds.),
Proceedings of the 5th International Seminar on ORC Power Systems.
White, M. ORCID: 0000-0002-7744-1993, Read, M. G. ORCID: 0000-0002-7753-2457 & Sayma, A. I. ORCID: 0000-0003-2315-0004 (2018).
Using a cubic equation of state to identify optimal working fluids for an ORC operating with two-phase expansion using a twin-screw expander.
In:
International Refrigeration and Air Conditioning Conference.
17th International Refrigeration and Air Conditioning Conference, 09-12 Jul 2018, West Lafayette, USA.
White, M. ORCID: 0000-0002-7744-1993, Read, M. G. & Sayma, A. I. (2018).
Optimisation of cascaded organic Rankine cycle systems for high-temperature waste-heat recovery.
Paper presented at the ECOS 2018 - The 31st International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, 17 - 22 June 2018, Guimarães, Portugal.
Read, M. G. ORCID: 0000-0002-7753-2457, Stosic, N. & Smith, I. K. ORCID: 0000-0003-1524-9880 (2017).
Geometrical aspects of novel internally geared screw machine.
In:
Refrigeration Science and Technology.
Compressors 2017 - 9th International Conference on Compressors and Coolants, 6-9 Sept 2017, Bratislava, Slovakia.
doi: 10.18462/iir.compr.2017.0241
Iezzi, M. & Read, M. G. ORCID: 0000-0002-7753-2457 (2017).
Enabling solid biomass fired small scale cogeneration systems with the twin screw wet steam expander technology.
In:
European Biomass Conference and Exhibition Online Proceedings 2017.
doi: 10.5071/25thEUBCE2017-ICO.12.2
Read, M. G. ORCID: 0000-0002-7753-2457, Stosic, N. & Smith, I. K. ORCID: 0000-0003-1524-9880 (2017).
Operational characteristics of internally geared positive displacement screw machines.
In:
ASME 2017 International Mechanical Engineering Congress and Exposition.
doi: 10.1115/IMECE2017-70228
Read, M. G., Smith, I. K. & Stosic, N. (2015). Comparison of Organic Rankine Cycle Under Varying Conditions Using Turbine and Twin-Screw Expanders. In: Lemort, V, Quoilin, S, De Paepe, M & van de broek, M (Eds.), Proceedings of the 3rd International Seminar on ORC Power Systems. 3rd International Seminar on ORC Power Systems, 12-14 Oct 2015, Brussels, Belgium.
Read, M. G., Smith, I. K. & Stosic, N. (2014). Multi-Variable Optimisation of Wet Vapour Organic Rankine Cycles with Twin-Screw Expanders. Paper presented at the 22nd International Compressor Engineering Conference, 14-17 Jul 2014, Perdue, France.