City Research Online

Items where City Author is "Fonseca, Joana"

Up a level
Export as [feed] RSS 2.0 [feed] RSS
Group by: Publication Type | No Grouping
Number of items: 39.

Article

Nadimi, S. and Fonseca, J. ORCID: 0000-0002-7654-6005 (2018). Image based simulation of one-dimensional compression tests on carbonate sand. Meccanica, doi: https://doi.org/10.1007/s11012-018-0923-2

Kong, D. and Fonseca, J. (2018). Quantification of the morphology of shelly carbonate sands using 3D images. Géotechnique, 68(3), pp. 249-261. doi: 10.1680/jgeot.16.P.278

Nadimi, S. and Fonseca, J. (2017). A micro finite element model for soil behaviour: Numerical validation. Géotechnique, doi: 10.1680/jgeot.16.P.163

Nadimi, S. and Fonseca, J. (2017). A micro finite-element model for soil behaviour. Géotechnique, 68(4), pp. 290-302. doi: 10.1680/jgeot.16.P.147

Paniagua, P., Fonseca, J., Gylland, A. S. and Nordal, S. (2017). Investigation of the change in soil fabric during cone penetration in silt using 2D measurements. Acta Geotechnica, doi: 10.1007/s11440-017-0559-8

Nadimi, S. and Fonseca, J. (2017). Single-Grain Virtualization for Contact Behavior Analysis on Sand. Journal of Geotechnical and Geoenvironmental Engineering, 143(9), 06017010.. doi: 10.1061/(ASCE)GT.1943-5606.0001740#sthash.NgJgwZ5K.dpuf

Fonseca, J., Nadimi, S., Reyes-Aldasoro, C. C., O’Sullivan, C. and Coop, M. R. (2016). Image-based investigation into the primary fabric of stress transmitting particles in sand. Soils and Foundations, 56(5), pp. 818-834. doi: 10.1016/j.sandf.2016.08.007

Nadimi, S. and Fonseca, J. (2016). Enhancing soil sample preparation by thermal cycling. Géotechnique, 66(11), pp. 953-958. doi: 10.1680/jgeot.15.T.033

Paniagua, P., Fonseca, J., Gylland, A. S. and Nordal, S. (2015). Microstructural study of the deformation zones during cone penetration in silt at variable penetration rates. Canadian Geotechnical Journal, 52(12), pp. 2088-2098. doi: 10.1139/cgj-2014-0498

Gourlay, C. M., O'Sullivan, C., Fonseca, J., Yuan, L., Kareh, K., Nagira, T. and Yasuda, H. (2014). Synchrotron radiography studies of shear-induced dilation in semi-solid Al alloys and steels. JOM: Journal of the Minerals, Metals and Materials Society, 66(8), pp. 1415-1424. doi: 10.1007/s11837-014-1029-5

Fonseca, J., Sim, W., Shire, T. and O'Sullivan, C. (2014). Microstructural analysis of sands with varying degrees of internal stability. Geotechnique, 64(5), pp. 405-411. doi: 10.1680/geot.13.T.014

Li, Y., Hu, Z., Weng, T., Fonseca, J. and Zhang, X. (2014). Experimental study on the vertical deformation of sand caused by cyclic withdrawal and recharging of groundwater. Engineering Geology, 183, pp. 247-253. doi: 10.1016/j.enggeo.2014.08.020

Fonseca, J., O'Sullivan, C., Nagira, T., Yasuda, H. and Gourlay, C. M. (2013). In situ study of granular micromechanics in semi-solid carbon steels. Acta Materialia, 61(11), pp. 4169-4179. doi: 10.1016/j.actamat.2013.03.043

Fonseca, J., Bésuelle, P. and Viggiani, G. (2013). Micromechanisms of inelastic deformation in sandstones: An insight using x-ray micro-tomography. Geotechnique Letters, 3, pp. 78-83. doi: 10.1680/geolett.13.034

Fonseca, J., O'Sullivan, C., Coop, M. R. and Lee, P. D. (2013). Quantifying the evolution of soil fabric during shearing using directional parameters. Géotechnique, 63(6), pp. 487-499. doi: 10.1680/geot.12.P.003

Fonseca, J., O'Sullivan, C., Coop, M. R. and Lee, P. D. (2013). Quantifying the evolution of soil fabric during shearing using scalar parameters. Géotechnique, 63(10), pp. 818-829. doi: 10.1680/geot.11.P.150

Fonseca, J., O'Sullivan, C., Coop, M. R. and Lee, P. D. (2012). Non-invasive characterization of particle morphology of natural sands. Soils and Foundations, 52(4), pp. 712-722. doi: 10.1016/j.sandf.2012.07.011

Book Section

Fonseca, J., Reyes-Aldasoro, C. C., O'Sullivan, C. and Coop, M. R. (2015). Experimental investigation into the primary fabric of stress transmitting particles. In: Soga, K., Kumar, K., Biscontin, G. and Kuo, M. (Eds.), Geomechanics from Micro to Macro. (pp. 1019-1024). London, UK: CRC Press. ISBN 9781138027077

Li, Y. Q., Hu, Z., Fang, X. and Fonseca, J. (2015). Analysis of micro characteristics and influence factors of foundation pit failure. In: Soga, K., Kumar, K., Biscontin, G. and Kuo, M. (Eds.), Geomechanics from Micro to Macro. (pp. 565-570). London, UK: CRC Press. ISBN 9781138027077

Paniagua, P., Gylland, A. S., Nordal, S. and Fonseca, J. (2015). Microstructural study of the deformation zones around a penetrating coned tip in silty soil. In: Soga, K., Kumar, K., Biscontin, G. and Kuo, M. (Eds.), Geomechanics from Micro to Macro. (pp. 1593-1598). London, UK: CRC Press. ISBN 9781138027077

Fonseca, J., O'Sullivan, C. and Coop, M. R. (2010). Quantitative Description of Grain Contacts in a Locked Sand. In: Reed, A. H. (Ed.), Advances in Computed Tomography for Geomaterials: GeoX 2010. (pp. 17-25). Wiley. ISBN 9781848211797

Conference or Workshop Item

Fonseca, J. ORCID: 0000-0002-7654-6005, Nadimi, S. and Kong, D. (2018). Image-based modelling of shelly carbonate sand for foundation design of offshore structures. In: Proceedings of the 1st Vietnam Symposium on Advances in Offshore Engineering. VSOE 2018. Lecture Notes in Civil Engineering. (pp. 55-60). Singapore: Springer. ISBN 978-981-13-2305-8

Nadimi, S. and Fonseca, J. (2017). Comparison between a μFE model and DEM for an assembly of spheres under triaxial compression. Paper presented at the Powders and Grains 2017 – 8th International Conference on Micromechanics on Granular Media, 3-7 July 2017, Montpellier, France.

Nadimi, S. and Fonseca, J. (2017). On the tensile strength of soil grains in Hertzian response. Paper presented at the Powders and Grains 2017 – 8th International Conference on Micromechanics on Granular Media, 3-7 July 2017, Montpellier, France.

Nadimi, S. and Fonseca, J. (2017). On the torsional loading of elastoplastic spheres in contact. Paper presented at the International Conference on Micromechanics of Granular Media, 3-7 Jul 2017, Montepellier, France.

Nadimi, S., Kong, D. and Fonseca, J. (2017). From imaging to prediction of carbonate sand behaviour. Paper presented at the ICTMS 2017, 26-30 Jun 2017, Lund, Sweden.

Nadimi, S., Di Pasquale, L. and Fonseca, J. (2017). Influence of fine fraction on breakage of binary granular materials. Paper presented at the 19th International Conference on Soil Mechanics and Geotechnical Engineering, 17-22 Sep 2017, Seoul, Korea.

Fonseca, J. ORCID: 0000-0002-7654-6005 and Camara, A. ORCID: 0000-0002-1675-2640 (2017). Using advanced statistical tools to better understand students’ expectation of teaching. Paper presented at the HEA Annual Conference 2017, 04-06 Jul 2017, Manchester, UK.

Nadimi, S., Divall, S., Fonseca, J., Goodey, R.J. and Taylor, R.N. (2016). An addendum for particle image velocimetry in centrifuge modelling. Paper presented at the The 3rd European Conference on Physical Modelling in Geotechnics, 1-3 Jun 2016, Nantes, France.

Nadimi, S., Fonseca, J., Barreto, D. and Taylor, R.N. (2016). A new approach to investigate the particle size effects in centrifuge modelling. Paper presented at the The 3rd European Conference on Physical Modelling in Geotechnics, 1-3 Jun 2016, Nantes, France.

Fonseca, J., Reyes-Aldasoro, C. C. and Wils, L. (2015). Three-dimensional quantification of the morphology and intragranular void ratio of a shelly carbonate sand. Paper presented at the Sixth International Symposium on Deformation Characteristics of Geomaterials, 15-11-2015 - 18-11-2015, Buenos Aires.

Nadimi, S., Fonseca, J., Bésuelle, P. and Viggiani, G. (2015). A microstructural finite element analysis of cement damage on Fontainebleau Sandstone. Paper presented at the ICTMS 2015, 2nd International Conference on Tomography of Materials and Structures, 29 Jun - 3 Jul 2015, Québec, Canada.

Nadimi, S., Fonseca, J. and Taylor, N. (2015). A microstructure-based finite element analysis of the response of sand. Paper presented at the Sixth International Symposium on Deformation Characteristics of Geomaterials, 15-11-2015 - 18-11-2015, Buenos Aires.

Fonseca, J., Karatza, Z., Bésuelle, P. and Viggiani, G. (2014). An experimental investigation on the deformation of Fontainebleau sandstone. Paper presented at the 16th International Conference on Experimental Mechanics, 07-07-2014 - 11-07-2014, Cambridge, UK.

Fonseca, J., Bésuelle, P. and Viggiani, G. (2013). Microstructure evolution on sandstones with different degrees of cementation. Paper presented at the Workshop on Experimental Micromechanics for Geomaterials (ISSMGE TC101-TC105), 23-5-2013 - 24-5-2013, Hong Kong.

O'Sullivan, C., Cavarretta, I., Fonseca, J. ORCID: 0000-0002-7654-6005 and Altuhafi, F. (2013). Quantitative Evaluation of Particle Morphology. Paper presented at the Workshop on Experimental Micromechanics for Geomaterials (ISSMGE TC101-TC105), 23-5-2013 - 24-5-2013, Hong Kong.

Fonseca, J., Bésuelle, P. and Viggiani, G. (2013). An experimental study of micro-scale deformation in a soft sandstone. Paper presented at the Proceedings of the 1st International Conference on Tomography of Materials and Structures (ICTMS2013), 01-07-2013 - 05-07-2013, Ghent, Belgium.

Fonseca, J., O'Sullivan, C. and Coop, M. R. (2009). Image segmentation techniques for granular materials. Paper presented at the 6th International Conference on Micromechanics of Granular Media, 13-07-2009 - 17-07-2009, Colorado, USA.

Fonseca, J. and O'Sullivan, C. (2008). A re-evaluation of the Fourier descriptor approach to quantifying sand particle geometry. Paper presented at the 4th International Symposium on Deformation Characteristics of Geomaterials, 21-09-2008 - 24-09-2008, Atlanta, Georgia, USA.

This list was generated on Sun Dec 16 04:29:51 2018 UTC.