City Research Online

Items where Author is "Goodey, R.J."

Up a level
Group by: Type | No Grouping
Number of items: 32.

De Falco, N., Bilotta, E., Divall, S. ORCID: 0000-0001-9212-5115 & Goodey, R.J. (2023). Numerical analysis of deep ground movements induced by circular shaft construction. In: Rahman, M. & Jaksa, M. (Eds.), Proceedings of the 20th International Conference on Soil Mechanics and Geotechnical Engineering. 20th International Conference on Soil Mechanics and Geotechnical Engineering 2022, 01-05 May 2022, Sydney, Australia.

Ritchie, E. P., Divall, S. ORCID: 0000-0001-9212-5115 & Goodey, R.J. (2023). A method for creating larger clay samples with permeability anisotropy for geotechnical centrifuge modelling. In: Rahman, M. & Jaksa, M. (Eds.), Proceedings of the 20th International Conference on Soil Mechanics and Geotechnical Engineering. Proceedings of the 20th International Conference on Soil Mechanics and Geotechnical Engineering, 01- 05 May 2022, Sydney, Australia.

Panchal, J. P., McNamara, A. M. ORCID: 0000-0002-3452-0800 & Goodey, R.J. ORCID: 0000-0002-9166-8393 (2020). Sheet pile groups as an alternative foundation solution to cast in-situ concrete piles. International Journal of Physical Modelling in Geotechnics, 20(2), pp. 83-96. doi: 10.1680/jphmg.18.00053

Bhide, A., Sedgwick, P., Barrett, B. , Cupples, G., Coates, R. ORCID: 0000-0002-6944-6428, Goodey, R.J. ORCID: 0000-0002-9166-8393, Linton, S. & McCourt, C. ORCID: 0000-0003-4765-5795 (2020). Prostaglandin insert dinoprostone versus trans-cervical balloon catheter for outpatient labour induction: a randomised controlled trial of feasibility (PROBIT-F). Pilot and Feasibility Studies, 6(1), article number 113. doi: 10.1186/s40814-020-00661-7

Ritchie, E. P., Lalicata, L., Divall, S. ORCID: 0000-0001-9212-5115 & Goodey, R.J. ORCID: 0000-0002-9166-8393 (2020). Tests of varied sample preparation methods for centrifuge modelling. In: 4th European Conference Physical Modelling in Geotechnics. 4th European Conference on Physical Modelling in Geotechnics - ECPMG 2020, 6-8 Sep 2020, Lulea, Sweden.

Rotter, J. M., Goodey, R.J. ORCID: 0000-0002-9166-8393 & Brown, C. J. (2019). Towards design rules for rectangular silo filling pressures. Engineering Structures, 198, article number 109547. doi: 10.1016/j.engstruct.2019.109547

Le, B., Goodey, R.J. & Divall, S. ORCID: 0000-0001-9212-5115 (2019). Subsurface ground movements due to circular shaft construction. Soils and Foundations, 59(5), pp. 1160-1171. doi: 10.1016/j.sandf.2019.03.013

Tanghetti, G., Goodey, R.J. ORCID: 0000-0002-9166-8393, Divall, S. , McNamara, A. M. & Mckinley, B. (2019). Design and development of a large shear box for testing working platform material. Paper presented at the ECSMGE - 2019. XVII European Conference on Soil Mechanics and Geotechnical Engineering, 1 - 6 September 2019, Reykjavik, Iceland.

Zhang, T., Taylor, R. N., Divall, S. ORCID: 0000-0001-9212-5115 , Zheng, G., Sun, J., Stallebrass, S. E. ORCID: 0000-0002-3747-9524 & Goodey, R.J. ORCID: 0000-0002-9166-8393 (2019). Explanation for twin tunnelling-induced surface settlements by changes in soil stiffness on account of stress history. Tunnelling and Underground Space Technology, 85, pp. 160-169. doi: 10.1016/j.tust.2018.12.015

Tanghetti, G., Goodey, R.J. ORCID: 0000-0002-9166-8393, McNamara, A. M. ORCID: 0000-0002-3452-0800 & Halai, H. (2018). Plate bearing tests for working platforms. In: McNamara, A. M. ORCID: 0000-0002-3452-0800, Divall, S. ORCID: 0000-0001-9212-5115, Goodey, R.J. ORCID: 0000-0002-9166-8393 , Taylor, N., Stallebrass, S. E. ORCID: 0000-0002-3747-9524 & Panchal, J. P. (Eds.), Physical Modelling in Geotechnics: Proceedings of the 9th International Conference on Physical Modelling in Geotechnics (ICPMG 2018), July 17-20, 2018, London, United Kingdom.

Panchal, J. P., McNamara, A. M. ORCID: 0000-0002-3452-0800 & Goodey, R.J. ORCID: 0000-0002-9166-8393 (2018). Influence of geometry on the bearing capacity of sheet piled foundations. In: McNamara, A. M. ORCID: 0000-0002-3452-0800, Divall, S. ORCID: 0000-0001-9212-5115, Goodey, R.J. ORCID: 0000-0002-9166-8393 , Taylor, N, Stallebrass, S. E. ORCID: 0000-0002-3747-9524 & Panchal, J. P. (Eds.), Physical Modelling in Geotechnics: Proceedings of the 9th International Conference on Physical Modelling in Geotechnics (ICPMG 2018), July 17-20, 2018, London, United Kingdom. (pp. 1395-1400). Boca Raton: CRC Press/Balkema.

Goodey, R.J. ORCID: 0000-0002-9166-8393 (2018). Physical modelling applied to infrastructure development. In: McNamara, A. M. ORCID: 0000-0002-3452-0800, Divall, S. ORCID: 0000-0001-9212-5115, Goodey, R.J. ORCID: 0000-0002-9166-8393 , Taylor, N, Stallebrass, S. E. ORCID: 0000-0002-3747-9524 & Panchal, J. P. (Eds.), Physical Modelling in Geotechnics: Proceedings of the 9th International Conference on Physical Modelling in Geotechnics (ICPMG 2018), July 17-20, 2018, London, United Kingdom.

Le, B. T., Nadimi, S., Goodey, R.J. ORCID: 0000-0002-9166-8393 & Taylor, R.N. ORCID: 0000-0002-8103-0433 (2018). A study on performance of three-dimensional imaging system for physical models. In: McNamara, A. M. ORCID: 0000-0002-3452-0800, Divall, S. ORCID: 0000-0001-9212-5115, Goodey, R.J. ORCID: 0000-0002-9166-8393 , Taylor, N., Stallebrass, S. E. ORCID: 0000-0002-3747-9524 & Panchal, J. P. (Eds.), Physical Modelling in Geotechnics: Proceedings of the 9th International Conference on Physical Modelling in Geotechnics (ICPMG 2018), July 17-20, 2018, London, United Kingdom.

Divall, S. ORCID: 0000-0001-9212-5115, Stallebrass, S. E. ORCID: 0000-0002-3747-9524, Goodey, R.J. ORCID: 0000-0002-9166-8393 & Ritchie, E. P. (2018). Development of layered models for geotechnical centrifuge tests. In: McNamara, A. M., Divall, S., Goodey, R.J. , Taylor, N., Stallebrass, S. E. & Panchal, J. P. (Eds.), Physical Modelling in Geotechnics: Proceedings of the 9th International Conference on Physical Modelling in Geotechnics (ICPMG 2018), July 17-20, 2018, London, United Kingdom. (pp. 143-147). London, UK: CRC Press.

Divall, S. ORCID: 0000-0001-9212-5115, Goodey, R.J. & Stallebrass, S. E. ORCID: 0000-0002-3747-9524 (2017). Twin-tunnelling-induced changes to clay stiffnesses. Géotechnique, 67(10), pp. 906-913. doi: 10.1680/jgeot.sip17.p.151

Brown, C. J., Goodey, R.J. ORCID: 0000-0002-9166-8393 & Rotter, J. M. (2017). Bending of rectangular plates subject to non-uniform pressure distributions relevant to containment structures. Paper presented at the Eurosteel 2017, 13-15 Sep 2017, Copenhagen, Denmark. doi: 10.1002/cepa.140

Divall, S., Taylor, R.N., Stallebrass, S. E. & Goodey, R.J. (2017). Predictions of changes in pore-water pressure around tunnels in clay. Paper presented at the 9th International Symposium on Geotechnical Aspects of Underground Construction in Soft Ground, 4-5 April 2017, Sao Paulo, Brazil.

Goodey, R.J., Brown, C. J. & Rotter, J. M. (2017). Rectangular steel silos: Finite element predictions of filling wall pressures. Engineering Structures, 132, pp. 61-69. doi: 10.1016/j.engstruct.2016.11.023

Le, B. T., Nadimi, S., Goodey, R.J. & Taylor, R.N. (2016). System to measure three-dimensional movements in physical models. Géotechnique Letters, 6(4), pp. 256-262. doi: 10.1680/jgele.16.00073

Goodey, R.J., McNamara, A. M. & Panchal, J. P. (2016). Bearing Capacity of Sheet Piled Foundations. Paper presented at the 2nd Asian Conference on Physical Modelling in Geotechnics, 30 Nov-02 Dec 2016, Shanhai, China.

Nadimi, S., Divall, S., Fonseca, J. , Goodey, R.J. & Taylor, R.N. (2016). An addendum for particle image velocimetry in centrifuge modelling. Paper presented at the The 3rd European Conference on Physical Modelling in Geotechnics, 1-3 Jun 2016, Nantes, France.

Divall, S. & Goodey, R.J. (2016). An apparatus for centrifuge modelling of a shaft construction in clay. Paper presented at the 3rd European Conference on Physical Modelling in Geotechnics Eurofuge 2016, 1-3 Jun 2016, Nantes, France.

Stallebrass, S. E., Phillips, N.S., Goodey, R.J. & Jefferis, S.A. (2015). Mechanisms for the disaggregation of soil cuttings in slurries. In: Proceedings of the XVI European Conference on Soil Mechanics and Geotechnical Engineering. Proceedings of the XVI European Conference on Soil Mechanics and Geotechnical Engineering

Divall, S. & Goodey, R.J. (2015). Twin-tunnelling-induced ground movements in clay. Proceedings of the Institution of Civil Engineers: Geotechnical Engineering, 168(3), pp. 247-256. doi: 10.1680/geng.14.00054

Phillips, N., Stallebrass, S. E., Goodey, R.J. & Jefferis, S. A. (2014). Test development for the investigation of soil disaggregation during slurry tunnelling. Paper presented at the ICPMG2014 – Physical Modelling in Geotechnics, 14-01-2014 - 17-01-2014, Perth, WA.

Divall, S., Goodey, R.J. & Taylor, R.N. (2014). The influence of a time delay between sequential tunnel constructions. Paper presented at the 8th International Conference on Physical Modelling in Geotechnics, 14-01-2014 - 17-01-2014, Perth, WA.

Arshi, H.S., Stone, K.J.L., Vaziri, M. , Newson, T.A., El-Marassi, M., Taylor, R.N. & Goodey, R.J. (2013). Modelling of monopile-footing foundation system for offshore structures. Paper presented at the 18th International Conference on Soil Mechanics and Geotechnical Engineering, 02-05 Sep 2013, Paris, France.

Divall, S. & Goodey, R.J. (2012). Apparatus for centrifuge modelling of twin-tunnel construction. INTERNATIONAL JOURNAL OF PHYSICAL MODELLING IN GEOTECHNICS, 12(3), pp. 102-111. doi: 10.1680/ijpmg.11.00014

Divall, S. & Goodey, R.J. (2012). Novel apparatus for generating ground movements around sequential twin tunnels in over-consolidated clay. Online publication by Proceedings of the ICE - Geotechnical Engineering, pp. 10-11.

Divall, S., Goodey, R.J. & Taylor, R. N. (2012). Ground movements generated by sequential Twin-tunnelling in over-consolidated clay. In: Delft - online publication by TU Delft Library. 2nd European Conference on Physical Modelling in Geotechnics, 23-04-2012 - 24-04-2012, Delft University of Technology, Netherlands. doi: 10.4233/uuid:f71fabea-424b-42e5-93aa-701715eed17d

McNamara, A. M., Divall, S., Goodey, R.J. , Gorasia, Rohit J., Halai, H., Rose, A.V., Stallebrass, S. E., Taylor, R.N. & Xu, M. (2012). The London Geotechnical Centrifuge Centre at City University London. In: Delft – online publication by TU Delft Library. 2nd European Conference on Physical Modelling in Geotechnics, 23-04-2012 - 24-04-2012, Delft University of Technology, Netherlands. doi: 10.4233/uuid:72050299-d870-4da4-9465-01833a6ea70f

McNamara, A. M., Goodey, R.J. & Taylor, R.N. (2009). Apparatus for centrifuge modelling of top down basement construction with heave reducing piles. International Journal of Physical Modelling in Geotechnics, 9(1), pp. 1-14. doi: 10.1680/ijpmg.2009.9.1.01

This list was generated on Thu Oct 10 02:47:57 2024 UTC.