Items where Author is "Yan, Y."
Nouri, J. M. 
ORCID: 0000-0001-8610-3737, Guerrato, D., Stosic, N. & Yan, Y. (2023).
Turbulent flow development within the discharge cavity of a screw compressor.
International Journal of Engine Research, 24(8),
pp. 3642-3654.
doi: 10.1177/14680874231163640
Nouri, J. M. ORCID: 0000-0001-8610-3737, Vasilakos, I. & Yan, Y. ORCID: 0000-0003-1124-4724 (2022).
Cavitation between cylinder-liner and piston-ring in a new designed optical IC engine.
International Journal of Engine Research, 23(7),
pp. 1144-1158.
doi: 10.1177/14680874211008007
Nouri, J. M. ORCID: 0000-0001-8610-3737, Vasilakos, I., Yan, Y. ORCID: 0000-0003-1124-4724 & Reyes-Aldasoro, C. C. ORCID: 0000-0002-9466-2018 (2019).
Effect of Viscosity and Speed on Oil Cavitation Development in a Single Piston-Ring Lubricant Assembly.
Lubricants, 7(10),
article number 88.
doi: 10.3390/lubricants7100088
Wang, Z., Zhang, Q., Yan, Y. , Liu, K. & Ligrani, P. M. (2017). Secondary flows and extra heat transfer enhancement of ribbed surfaces with jet impingement. Numerical Heat Transfer Part A, 72(9), pp. 669-680. doi: 10.1080/10407782.2017.1394139
Mirshahi, M., Yan, Y. & Nouri, J. M. (2015). Influence of cavitation on near nozzle exit spray. Journal of Physics: Conference Series,, 656(1), article number 012093. doi: 10.1088/1742-6596/656/1/012093
Wang, X., Yan, Y., Sun, Z. & Liu, C. (2014). The Vortical Structures in the Rear Separation and Wake Produced by a Supersonic Micro-Ramp. Flow, Turbulence and Combustion, 93(1), pp. 25-36. doi: 10.1007/s10494-014-9531-y
Wang, X., Yan, Y., Sun, Z. & Liu, C. (2014). LES investigation into the generation of momentum deficits in the supersonic wake of a micro-ramp. Journal of Mechanical Science and Technology, 28(4), pp. 1327-1337. doi: 10.1007/s12206-013-1164-x
Sun, Z., Scarano, F., van Oudheusden, B. W. , Schrijer, F. F. J., Yan, Y. & Liu, C. (2014). Numerical and experimental investigations of the supersonic microramp wake. AIAA Journal, 52(7), pp. 1518-1527. doi: 10.2514/1.j052649
Kim, S., Yan, Y., Nouri, J. M. & Arcoumanis, C. (2013). Effects of intake flow and coolant temperature on the spatial fuel distribution in a direct-injection gasoline engine by PLIF technique. Fuel, 106, pp. 737-748. doi: 10.1016/j.fuel.2012.10.002
Gavaises, E., Mirshahi, M., Nouri, J. M. & Yan, Y. (2013). Link between in-nozzle cavitation and jet spray in a gasoline multi-hole injector. Paper presented at the ILASS 2013 - 25th Annual Conference on Liquid Atomization and Spray Systems, 1-4 Sept 2013, Chania, Crete.
Marchi, A., Yan, Y., Nouri, J. M. & Arcoumanis, C. (2013). PIV Investigation on Flows Induced by Fuel Sprays from an Outwards Opening Pintle Injector for GDI engines. Paper presented at the ILASS 2013 - 25th Annual Conference on Liquid Atomization and Spray Systems, 1-4 Sept 2013, Chania, Crete.
Marchi, A., Nouri, J. M., Yan, Y. & Arcoumanis, C. (2010). Spray stability of outwards opening pintle injectors for stratified direct injection spark ignition engine operation. International Journal of Engine Research, 11(6), pp. 413-437. doi: 10.1243/14680874JER605
Kim, S., Nouri, J. M., Yan, Y. & Arcoumanis, C. (2009). Effects of intake flow on the spray structure of a multi-hole injector in a DISI engine. International Journal of Automotive Technology, 10(3), pp. 277-284. doi: 10.1007/s12239-009-0032-2
Nouri, J. M., Marchi, A., Yan, Y. & Arcoumanis, C. (2007). Internal flow and spray characteristics of a pintle-type outward opening piezo-injector. Transactions Journal of Engines, 116(6), pp. 915-934. doi: 10.4271/2007-01-1406
Nouri, J. M., Mitroglou, N., Yan, Y. & Arcoumanis, D. (2007). Internal flow and cavitation in a multi-hole injector for gasoline direct-injection engines. SAE Technical Papers, 2007-01-1405-.. doi: 10.4271/2007-01-1405
Yan, Y. (1996). The effects of electric fields on phase change processes in industry. (Unpublished Doctoral thesis, City, University of London)