City Research Online

Mohamad Tajudin, M. F., Ahmad, A. H., Alias, J. , Abd Razak, N. A. & Naher, S. ORCID: 0000-0003-2047-5807view all authors (2024). Thermal Profile and Microstructure Analysis of Al-Si with the Magnesium Addition under Different Cooling Conditions. International Journal of Metalcasting, doi: 10.1007/s40962-024-01388-4

Megalingam, A., Ahmad, A. H., Alang, N. A. , Alias, J. & Naher, S. ORCID: 0000-0003-2047-5807view all authors (2024). Creep Behaviour of Aluminium 7075 Feedstock Billet Globular Microstructure at High Processing Temperature. Journal of Failure Analysis and Prevention, 24(3), pp. 1324-1332. doi: 10.1007/s11668-024-01917-7

Mahmoud, M., Naher, S. ORCID: 0000-0003-2047-5807, Ramadan, M. , Abdelkareem, M. A., Jaber, H. & Olabi, A-G.view all authors (2023). Investigation of a ground-cooled organic Rankine cycle for waste heat recovery. International Journal of Thermofluids, 18, article number 100348. doi: 10.1016/j.ijft.2023.100348

Bashir, M. N., Haseeb, A. S. M. A., Naher, S. ORCID: 0000-0003-2047-5807 , Ali, M. M., Ali Bashir, M. B., Zaidi, A. A., Jamshaid, M. & Javed, I.view all authors (2023). Effects of cobalt nanoparticle on microstructure of Sn58Bi solder joint. Journal of Materials Science: Materials in Electronics, 34(4), article number 248. doi: 10.1007/s10854-022-09465-2

Nasir Bashir, M., Saad, H. M., Rizwan, M. , Bingöl, S., Channa, I. A., Gul, M., Haseeb, A. S. M. A. & Naher, S. ORCID: 0000-0003-2047-5807view all authors (2022). Effect of cobalt nanoparticles on mechanical properties of Sn–58Bi solder joint. Journal of Materials Science: Materials in Electronics, 33(28), pp. 22573-22579. doi: 10.1007/s10854-022-09035-6

Baig, J. A., Chandio, I. G., Kazi, T. G. , Afridi, H. I., Akhtar, K., Junaid, M., Naher, S. ORCID: 0000-0003-2047-5807, Solangi, S. A. & Malghani, N. A.view all authors (2022). Risk Assessment of Macronutrients and Minerals by Processed, Street, and Restaurant Traditional Pakistani Foods: a Case Study. Biological Trace Element Research, 201(7), pp. 3553-3566. doi: 10.1007/s12011-022-03429-7

Bashir, M. N., Saad, H. M., Rizwan, M. , Quazi, M. M., Ali, M. M., Ahmed, A., Zaidi, A. A., Soudagar, M. E. M., Haseeb, A. S. M. A. & Naher, S. ORCID: 0000-0003-2047-5807view all authors (2022). Effects of tin particles addition on structural and mechanical properties of eutectic Sn–58Bi solder joint. Journal of Materials Science: Materials in Electronics, 33(28), pp. 22499-22507. doi: 10.1007/s10854-022-09028-5

Mahmood, A. ORCID: 0000-0002-6647-3682, Haseeb, A., Rozali, S. , Brabazon, D., Rahman, B. M. A. ORCID: 0000-0001-6384-0961, Grattan, K. T. V. ORCID: 0000-0003-2250-3832 & Naher, S.view all authors (2022). Synthesis of ZnO and CuO Nanowires by Thermal Oxidation on Metallic Substrates. Key Engineering Materials, 926, pp. 1703-1712. doi: 10.4028/p-qvfxm2

Mahmoud, M., Alkhedher, M., Ramadan, M. , Pullen, K. R. ORCID: 0000-0001-8501-9226, Olabi, A-G. & Naher, S. ORCID: 0000-0003-2047-5807view all authors (2022). Experimental investigation into the potential of using a shallow ground-cooled condenser in Lebanon. Energy Conversion and Management, 264, article number 115729. doi: 10.1016/j.enconman.2022.115729

Mahmoud, M., Alkhedher, M., Ramadan, M. , Naher, S. ORCID: 0000-0003-2047-5807 & Pullen, K.view all authors (2022). An investigation on organic Rankine cycle incorporating a ground-cooled condenser: Working fluid selection and regeneration. Energy, 249, article number 123742. doi: 10.1016/j.energy.2022.123742

Mahmoud, M., Ramadan, M., Pullen, K. R. ORCID: 0000-0001-8501-9226 , Abdelkareem, M. A., Olabi, A. G. & Naher, S. ORCID: 0000-0003-2047-5807view all authors (2022). An Investigation on Nano-Enhanced Phase Change Materials: Carbon-Based Nanoparticles. Key Engineering Materials, 922, pp. 11-16. doi: 10.4028/p-m17i9f

Kumar Bhoi, N., Singh, H., Pratap, S. , Naher, S. ORCID: 0000-0003-2047-5807 & Jain, P. K.view all authors (2022). Zinc oxide nanorods effect in micro structural and mechanical characteristics of aluminium composite material. Materials Science and Engineering: B, 278, article number 115641. doi: 10.1016/j.mseb.2022.115641

Kabir, I. R. & Naher, S. ORCID: 0000-0003-2047-5807 (2021). Thermal and thermomechanical modelling of laser melting processing techniques. In: Issa, A. & Brabazon, D. (Eds.), Laser Micro- and Nano-Scale Processing, Fundamentals and applications. (7.1-7.23). Bristol, UK: IOP Publishing. doi: 10.1088/978-0-7503-1683-5ch7

Abd Razak, N. A., Ahmad, A. H., Rashidi, M. M. & Naher, S. ORCID: 0000-0003-2047-5807view all authors (2021). An investigation of semisolid Al7075 feedstock billet produced by a gas-assisted direct thermal method. The International Journal of Advanced Manufacturing Technology, 114(3-4), pp. 1233-1240. doi: 10.1007/s00170-021-06924-8

Mahmoud, M., Ramadan, M., Naher, S. , Pullen, K. R., Ali Abdelkareem, M. & Olabi, A-G.view all authors (2021). A review of geothermal energy-driven hydrogen production systems. Thermal Science and Engineering Progress, 22, article number 100854. doi: 10.1016/j.tsep.2021.100854

Mahmoud, M., Ramadan, M., Pullen, K. R. , Abdelkareem, M. A., Wilberforce, T., Olabi, A-G. & Naher, S.view all authors (2021). A review of grout materials in geothermal energy applications. International Journal of Thermofluids, 10, article number 100070. doi: 10.1016/j.ijft.2021.100070

Mahmoud, M., Ramadan, M., Naher, S. ORCID: 0000-0003-2047-5807 , Pullen, K. & Olabi, A-G.view all authors (2021). CO2 – based transcritical Rankine cycle coupled with a ground-cooled condenser. Thermal Science and Engineering Progress, 25, article number 100948. doi: 10.1016/j.tsep.2021.100948

Arafat, M., Dinan, B., Haseeb, A. , Akbar, S., Rahman, B. M., Rozali, S. & Naher, S.view all authors (2021). Growth of 1D TiO2nanostructures on Ti substrates incorporated with residual stress through humid oxidation and their characterizations. Nanotechnology, 32(47), article number 475607. doi: 10.1088/1361-6528/ac1d77

Dasari, B. L. & Naher, S. ORCID: 0000-0003-2047-5807 (2020). Graphene Materials for Batteries. In: Olabi, A-G. (Ed.), Reference Module in Materials Science and Materials Engineering. . Amsterdam, Netherlands: Elsevier. doi: 10.1016/B978-0-12-815732-9.00036-X

Mahmoud, M., Ramadan, M., Naher, S. ORCID: 0000-0003-2047-5807 , Pullen, K. R. ORCID: 0000-0001-8501-9226 & Olabi, A-G.view all authors (2020). The impacts of different heating systems on the environment: A review. Science of The Total Environment, 766, article number 142625. doi: 10.1016/j.scitotenv.2020.142625

Mahmoud, M., Ramadan, M., Naher, S. ORCID: 0000-0003-2047-5807 , Pullen, K. R. ORCID: 0000-0001-8501-9226, Baroutaji, A. & Olabi, A-G.view all authors (2020). Recent advances in district energy systems: A review. Thermal Science and Engineering Progress, 20, article number 100678. doi: 10.1016/j.tsep.2020.100678

Qaban, A. ORCID: 0000-0003-2982-8429, Mohmed, T., Quazi, M. M. & Naher, S. ORCID: 0000-0003-2047-5807view all authors (2020). The effect of Al and Nb contents, cooling rate and rolling condition on the microstructure and corrosion behaviour of HSLA steel. Materials Today Communications, 25, article number 101362. doi: 10.1016/j.mtcomm.2020.101362

Mahmoud, M., Ramadan, M., Olabi, A-G. , Pullen, K. R. ORCID: 0000-0001-8501-9226 & Naher, S. ORCID: 0000-0003-2047-5807view all authors (2020). A review of mechanical energy storage systems combined with wind and solar applications. Energy Conversion and Management, 210, article number 112670. doi: 10.1016/j.enconman.2020.112670

Barrie, M., Qaban, A. ORCID: 0000-0003-2982-8429 & Naher, S. ORCID: 0000-0003-2047-5807 (2020). The influence of Widmanstätten ferrite, martensite and grain boundary carbides on the strength and impact behaviour of high Al (0.2%) and Nb containing hot rolled steels. Materials and design, 190, article number 108601. doi: 10.1016/j.matdes.2020.108601

Mintz, B., Qaban, A. ORCID: 0000-0003-2982-8429, Bendke, P. & Naher, S. ORCID: 0000-0003-2047-5807view all authors (2019). The influence of a high aluminium addition on the strength and impact behaviour of hot-rolled Nb containing steels. Materials Science and Technology, 36(2), pp. 233-244. doi: 10.1080/02670836.2019.1701272

Tamanna, N., Crouch, R.S. & Naher, S. ORCID: 0000-0003-2047-5807 (2019). Progress in Numerical Simulation of the Laser Cladding Process. Optics and Lasers in Engineering, 122, pp. 151-163. doi: 10.1016/j.optlaseng.2019.05.026

Liu, J., Silveira, J., Groarke, R. , Parab, S., Singh, H., McCarthy, E., Karazi, S., Mussatto, A., Houghtaling, J., Ahad, I. U., Naher, S. ORCID: 0000-0003-2047-5807 & Brabazon, D.view all authors (2019). Effect of powder metallurgy synthesis parameters for pure aluminium on resultant mechanical properties. International Journal of Material Forming, 12(1), pp. 79-87. doi: 10.1007/s12289-018-1408-5

Qaban, A. ORCID: 0000-0003-2982-8429 & Naher, S. ORCID: 0000-0003-2047-5807 (2019). Evaluation of Toughness of High Strength Low Alloy (HSLA) Steels as a Function of Carbon Content. International Journal of Mechanical and Production Engineering (IJMPE), 7(5), pp. 53-56.

Qaban, A. ORCID: 0000-0003-2982-8429 & Naher, S. ORCID: 0000-0003-2047-5807 (2019). Investigation of corrosion resistance of high-strength low-alloy (HSLA) steel in fresh and salt water for pipeline application. AIP Conference Proceedings, 2146, article number 20021. doi: 10.1063/1.5123708

Dasari, B. L., Brabazon, D. & Naher, S. ORCID: 0000-0003-2047-5807 (2019). Prediction of Mechanical Properties of Graphene Oxide Reinforced Aluminum Composites. Metals, 9(10), article number 1077. doi: 10.3390/met9101077

Dasari, B. L., Morshed, M.M., Nouri, J. M. ORCID: 0000-0001-8610-3737 , Brabazon, D. & Naher, S.view all authors (2018). Mechanical properties of graphene oxide reinforced aluminium matrix composites. Composites Part B: Engineering, 145, pp. 136-144. doi: 10.1016/j.compositesb.2018.03.022

Qaban, A. & Naher, S. ORCID: 0000-0003-2047-5807 (2018). Influence of Al content on the corrosion resistance of micro-alloyed hot rolled steel as a function of grain size. AIP Conference Proceedings, 1960, article number 040017. doi: 10.1063/1.5034871

Kabir, I. R., Yin, D., Tamanna, N. & Naher, S. ORCID: 0000-0003-2047-5807view all authors (2018). Thermomechanical modelling of laser surface glazing for H13 tool steel. Applied Physics A: Materials Science & Processing, 124(3), article number 260. doi: 10.1007/s00339-018-1671-9

Tamanna, N., Crouch, R.S., Kabir, I. R. & Naher, S.view all authors (2018). An Analytical Model to Predict and Minimize the Residual Stress of Laser Cladding Process. Applied Physics A: Materials Science & Processing, 124(2), article number 202. doi: 10.1007/s00339-018-1585-6

Dasari, B. L., Nouri, J. M., Brabazon, D. & Naher, S.view all authors (2017). Graphene and derivatives – Synthesis techniques, properties and their energy applications. Energy, 140(1), pp. 766-778. doi: 10.1016/j.energy.2017.08.048

Kabir, I. R., Yin, D. & Naher, S. ORCID: 0000-0003-2047-5807 (2017). 3D Thermal Model of Laser Surface Glazing for H13 Tool Steel. AIP Conference Proceedings, 1892, article number 130003. doi: 10.1063/1.5008152

Qaban, A., Mintz, B. & Naher, S. (2017). Hot rolled high Al containing steels as a replacement for the control rolled high strength low alloy (HSLA) steels. AIP Conference Proceedings, 1892(1), article number 130007. doi: 10.1063/1.5008156

Tamanna, N., Crouch, R.S. & Naher, S. ORCID: 0000-0003-2047-5807 (2017). A One-dimensional Analysis of the Distribution of Temperature, Stress and Strain in the co-axial Laser Cladding Process. AIP Conference Proceedings, 1892, article number 040015. doi: 10.1063/1.5008041

Dasari, B. L., Nouri, J. M., Brabazon, D. & Naher, S.view all authors (2017). Parametric study for graphene reinforced aluminum matrix composites production using Box Behnken design. AIP Conference Proceedings, 1892(1), article number 130006. doi: 10.1063/1.5008155

Kabir, I. R., Yin, D., Tamanna, N. & Naher, S. ORCID: 0000-0003-2047-5807view all authors (2017). 3D Thermal Model of Laser Surface Glazing for Ti6Al4V alloy. Applied Sciences,

Qaban, A., Mintz, B., Kang, S. E. & Naher, S.view all authors (2017). Hot ductility of high Al TWIP steels containing Nb and Nb-V. Materials Science and Technology, 33(14), pp. 1645-1656. doi: 10.1080/02670836.2017.1309097

Yin, D., Wang, D., Li, W. , Li, X., Zhang, H. & Naher, S.view all authors (2017). Development of a new 3D model for the prediction of residual stress and fracture behaviour in Ti-6Al-4V after ultrasonic peening treatment. Journal of Materials Processing Technology, 247, pp. 29-39. doi: 10.1016/j.jmatprotec.2017.03.033

Liu, J., Khan, U., Coleman, J. , Fernandez, B., Rodriguez, P., Naher, S. & Brabazon, B.view all authors (2016). Graphene Oxide and Graphene Nanosheet Reinforced Aluminium Matrix Composites: powder synthesis and prepared composite characteristics. Materials & Design, 94, pp. 87-94. doi: 10.1016/j.matdes.2016.01.031

Kabir, I. R., Yin, D. & Naher, S. (2016). Two dimensional finite element thermal model of laser surface glazing for H13 tool steel. AIP Conference Proceedings, 1769(1), article number 110003. doi: 10.1063/1.4963512

Laksmi, B., Nouri, J. M., Brabazon, D. & Naher, S.view all authors (2015). Prediction of properties for the production and application of graphene reinforced metal matrix composites. Paper presented at the 8th International Conference on Sustainable Energy & Environmental Protection (SEEP 2015), 11-14 August 2015, University of the West of Scotland, Paisley.

Naher, S., Ahmad, A.H. & Brabazon, D. (2014). Direct thermal method of aluminium 7075. Advanced Materials Research, 939, pp. 400-408. doi: 10.4028/www.scientific.net/AMR.939.400

Ahmad, A.H., Naher, S. & Brabazon, D. (2014). Injection tests and effect on microstructure and properties of aluminium 7075 direct thermal method feedstock billets. Key Engineering Materials, 611-61, pp. 1637-1644. doi: 10.4028/www.scientific.net/kem.611-612.1637

Ahmad, A.H., Naher, S. & Brabazon, D. (2014). The effect of direct thermal method, temperature and time on microstructure of a cast aluminum alloy. Materials and Manufacturing Processes, 29(2), pp. 134-139. doi: 10.1080/10426914.2013.822980

Lipowiecki, M., Ryvolova, M., Toettoesi, A. , Kolmer, N., Naher, S., Brennan, S.A., Vazquez, M. & Brabazon, D.view all authors (2014). Permeability of rapid prototyped artificial bone scaffold structures. Journal of Biomedical Materials Research Part A, 102(11), pp. 4127-4135. doi: 10.1002/jbm.a.35084

Aqida, S.N., Brabazon, D. & Naher, S. (2012). Atomic diffusion in laser surface modified AISI H13 steel. Applied Physics A: Materials Science & Processing, 112(1), pp. 139-142. doi: 10.1007/s00339-012-7214-x

Aqida, S.N, Brabazon, D. & Naher, S. (2012). An investigation of phase transformation and crystallinity in laser surface modified H13 steel. Applied Physics A: Materials Science & Processing, 110(3), pp. 673-678. doi: 10.1007/s00339-012-7149-2

Chikarakara, E., Naher, S. & Brabazon, D. (2012). High speed laser surface modification of Ti-6Al-4V. Surface and Coatings Technology, 206(14), pp. 3223-3229. doi: 10.1016/j.surfcoat.2012.01.010

Naher, S., Orpen, D., Brabazon, D. , Poulsen, C.R. & Morshed, M.M.view all authors (2010). Effect of micro-channel geometry on fluid flow and mixing. Simulation Modelling Practice and Theory, 19(4), pp. 1088-1095. doi: 10.1016/j.simpat.2010.12.008

Aqida, S.N., Calosso, F., Brabazon, D. , Naher, S. & Rosso, M.view all authors (2010). Thermal fatigue properties of laser treated steels. International Journal of Material Forming, 3(S1), pp. 797-800. doi: 10.1007/s12289-010-0890-1