City Research Online

Article

Abay, T. and Kyriacou, P. A. (2014). Investigation of Photoplethysmography and Near Infrared Spectroscopy for the Assessment of Tissue Blood Perfusion. 2014 36th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), pp. 5361-5364. doi: 10.1109/EMBC.2014.6944837

Abay, T. Y. and Kyriacou, P. A. (2017). Photoplethysmography for blood volumes and oxygenation changes during intermittent vascular occlusions. Journal of Clinical Monitoring and Computing, doi: 10.1007/s10877-017-0030-2

Abdelmalik, A. A., Fothergill, J. and Dodd, S. J. (2011). Electrical breakdown strength characteristics of palm kernel oil ester-based dielectric fluids. Annual Report - Conference on Electrical Insulation and Dielectric Phenomena, CEIDP, pp. 183-186. doi: 10.1109/CEIDP.2011.6232627

Abdollahi, Z., Kyriacou, P. A. and Phillips, J. P. (2015). Evaluation of optical interference in a combined measurement system used for assessment of tissue blood flow. SPIE Proceedings, 9315(93150R), doi: 10.1117/12.2079760

Abdollahi, Z., Phillips, J. P. and Kyriacou, P. A. (2013). Evaluation of a combined reflectance photoplethysmography and laser Doppler flowmetry surface probe. 35th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), pp. 1728-1731. doi: 10.1109/EMBC.2013.6609853

Aboukhedr, M., Georgoulas, A., Marengo, M., Gavaises, M. ORCID: 0000-0003-0874-8534 and Vogiatzaki, K. (2018). Simulation of micro-flow dynamics at low capillary numbers using adaptive interface compression. Computers & Fluids, 165, pp. 13-32. doi: 10.1016/j.compfluid.2018.01.009

Adcock, T. A. A., Taylor, P. H., Yan, S., Ma, Q. and Janssen, P. A. E. M. (2011). Did the Draupner wave occur in a crossing sea?. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 467(2134), pp. 3004-3021. doi: 10.1098/rspa.2011.0049

Addepalli, S., Zhao, Y., Roy, R. ORCID: 0000-0001-5491-7437, Galhenege, W., Colle, M., Yu, J. and Ucur, A. (2019). Non-destructive evaluation of localised heat damage occurring in carbon composites using thermography and thermal diffusivity measurement. Measurement, 131, pp. 706-713. doi: 10.1016/j.measurement.2018.09.040

Agrawal, A., Oates, A. and Cabrera-Espana, F. (2014). Fabrication and characterisation of Si micropillar PV structures. Materials Research Innovations, 18(7), pp. 500-504. doi: 10.1179/1433075X14Y.0000000244

Ajour, M. N., Dissado, L. A., Fothergill, J. and Norman, P. N. (2002). Dielectric spectroscopy of epoxy/glass composite materials. Conference on Electrical Insulation and Dielectric Phenomena (CEIDP), Annual Report, pp. 438-441. doi: 10.1109/CEIDP.2002.1048828

Akerman, S., Reyes-Aldasoro, C. C., Fisher, M., Pettyjohn, K. L., Björndahl, M. A., Evans, H. and Tozer, G. M. (2011). Microflow of fluorescently labelled red blood cells in tumours expressing single isoforms of VEGF and their response to vascular targeting agents. Medical Engineering & Physics, 33(7), pp. 805-809. doi: 10.1016/j.medengphy.2010.09.006

Allwood, J. M., Childs, T. H. C., Clare, A. T., De Silva, A. K. M., Dhokia, V., Hutchings, I. M., Leach, R. K., Leal-Ayala, D. R., Lowth, S., Majewski, C. E., Marzano, A., Mehnen, J., Nassehi, A., Ozturk, E., Raffles, M. H., Roy, R. ORCID: 0000-0001-5491-7437, Shyha, I. and Turner, S. (2016). Manufacturing at double the speed. Journal of Materials Processing Technology, 229, pp. 729-757. doi: 10.1016/j.jmatprotec.2015.10.028

Alonso, E., Karcanias, N. and Hessami, A. G. (2013). Symmetries, Groups, Groupoids and Systems of Systems. SYSCON 2013: 7th Annual IEEE International Systems Conference, pp. 244-250. doi: 10.1109/SysCon.2013.6549889

Alwis, L., Sun, T. and Grattan, K. T. V. (2016). Developments in optical fibre sensors for industrial applications. Optics and Laser Technology, 78(A), pp. 62-66. doi: 10.1016/j.optlastec.2015.09.004

Aming, A., Uthman, M., Chitaree, R., Mohammed, W. S. and Rahman, B. M. (2016). Design and Characterization of Porous Core Polarization Maintaining Photonic Crystal Fiber for THz Guidance. Journal of Lightwave Technology, 34(23), pp. 5583-5590. doi: 10.1109/JLT.2016.2623657

Andrienko, N., Andrienko, G., Barrett, L., Dostie, M. and Henzi, P. (2013). Space transformation for understanding group movement. IEEE Transactions on Visualization and Computer Graphics, 19(12), pp. 2169-2178. doi: 10.1109/TVCG.2013.193

Andriotis, A., Gavaises, M. and Arcoumanis, C. (2008). Vortex flow and cavitation in diesel injector nozzles. Journal of Fluid Mechanics, 610, pp. 195-215. doi: 10.1017/S0022112008002668

Aqida, S.N, Brabazon, D. and Naher, S. (2012). An investigation of phase transformation and crystallinity in laser surface modified H13 steel. Applied Physics A: Materials Science & Processing, 110(3), pp. 673-678. doi: 10.1007/s00339-012-7149-2

Aqida, S.N., Brabazon, D. and Naher, S. (2012). Atomic diffusion in laser surface modified AISI H13 steel. Applied Physics A: Materials Science & Processing, 112(1), pp. 139-142. doi: 10.1007/s00339-012-7214-x

Arjeneh, M., Kovacevic, A., Manolis, M. and Stosic, N. (2015). Numerical and Experimental Investigation of Pressure Losses at Suction of a Twin Screw Compressor. IOP Conference Series: Materials Science and Engineering, 90(1), 012006. doi: 10.1088/1757-899X/90/1/012006

Asad, M. and Slabaugh, G. G. (2016). Learning Marginalization through Regression for Hand Orientation Inference. 2016 IEEE Conference on Computer Vision and Pattern Recognition Workshops (CVPRW), pp. 1215-1223. doi: 10.1109/CVPRW.2016.154

Athanasios, N., Nikolopoulos, N., Nikolaos, M., Panagiotis, G. and Kakaras, E. (2015). Optimization of a log wood boiler through CFD simulation methods. Fuel Processing Technology, 137, pp. 75-92. doi: 10.1016/j.fuproc.2015.04.010

Athanassiadou, C. J., Karakostas, C. Z., Margaris, B. N. and Kappos, A. J. (2011). Displacement spectra and displacement modification factors, based on records from Greece. Soil Dynamics and Earthquake Engineering, 31(12), pp. 1640-1653. doi: 10.1016/j.soildyn.2011.06.008

Atkin, C.J. (2001). New aerodynamic approaches to suction system design. Notes on Numerical Fluid Mechanics, 76(3), pp. 55-63. doi: 10.1007/978-3-540-45359-8_7

Atsonios, K., Violidakis, I., Agraniotis, M., Grammelis, P., Nikolopoulos, N. and Kakaras, E. (2015). Thermodynamic analysis and comparison of retrofitting pre-drying concepts at existing lignite power plants. Applied Thermal Engineering, 74, pp. 165-173. doi: 10.1016/j.applthermaleng.2013.11.007

Ayoub, A. and Filippou, F. C. (2010). Finite-Element Model for Pretensioned Prestressed Concrete Girders. Journal of Structural Engineering, 136(4), pp. 401-409. doi: 10.1061/(ASCE)ST.1943-541X.0000132,

Banerjee, J. R. and Ananthapuvirajah, A. (2018). Free vibration of functionally graded beams and frameworks using the dynamic stiffness method. Journal of Sound and Vibration, 422, pp. 34-47. doi: 10.1016/j.jsv.2018.02.010

Banerjee, J. R. and Kennedy, D. (2014). Dynamic stiffness method for inplane free vibration of rotating beams including Coriolis effects. Journal of Sound and Vibration, 333(26), pp. 7299-7312. doi: 10.1016/j.jsv.2014.08.019

Banerjee, J. R., Liu, X. and Kassem, H. I. (2014). Aeroelastic stability analysis of high aspect ratio aircraft wings. Journal of Applied Nonlinear Dynamics, 3(4), pp. 413-422. doi: 10.5890/JAND.2011.12.001

Banerjee, J. R., Papkov, S.O., Liu, X. and Kennedy, D. (2015). Dynamic stiffness matrix of a rectangular plate for the general case. JOURNAL OF SOUND AND VIBRATION, 342, doi: 10.1016/j.jsv.2014.12.031

Barambones, O., Irigoyen, E. and Tomas-Rodriguez, M. (2015). Introduction to the special section "Techniques of stability of fuzzy control systems". Revista Iberoamericana de Automática e Informática Industrial RIAI, 12(4), pp. 432-433. doi: 10.1016/j.riai.2015.09.003

Barh, A., Pal, B. P., Varshney, R. K. and Rahman, B. M. (2012). Design of a compact SOI polarization rotator for mid-IR application. CODEC 2012 - 5th International Conference on Computers and Devices for Communication, pp. 1-4. doi: 10.1109/CODEC.2012.6509320

Barh, A., Varshney, R. K., Pal, B. P., Agrawal, G. P. and Rahman, B. M. (2016). Design of a Polymer-Based Hollow-Core Bandgap Fiber for Low-Loss Terahertz Transmission. IEEE Photonics Technology Letters, 28(15), pp. 1703-1706. doi: 10.1109/LPT.2016.2544198

Bauer, D., Chaves, H. and Arcoumanis, C. (2012). Measurements of void fraction distribution in cavitating pipe flow using x-ray CT. Measurement Science and Technology, 23(5), 055302.. doi: 10.1088/0957-0233/23/5/055302

Bauer, K. and Bruecker, C. (2014). Behavior of oscillatory tube flow at liquid-gas interfaces. Physics of Fluids, 26(7), 072106.. doi: 10.1063/1.4890717

Bergeles, G., Koukouvinis, P., Gavaises, M., Li, J. and Wang, L. (2015). An Erosion Aggressiveness Index (EAI) Based on Pressure Load Estimation Due to Bubble Collapse in Cavitating Flows Within the RANS Solvers. SAE International Journal of Engines, 8(5), pp. 2276-2284. doi: 10.4271/2015-24-2465

Bianchi, G., Kovacevic, A. and Cipollone, R. (2017). Deforming grid generation for numerical simulations of fluid dynamics in sliding vane rotary machines. Advances in Engineering Software, 112, pp. 180-191. doi: 10.1016/j.advengsoft.2017.05.010

Bilotta, E. and Stallebrass, S. E. (2009). Prediction of stresses and strains around model tunnels with adjacent embedded walls in overconsolidated clay. Computers and Geotechnics, 36(6), pp. 1049-1057. doi: 10.1016/j.compgeo.2009.03.015

Bremer, K., Meinhardt-Wollweber, M., Thiel, T., Werner, G., Sun, T., Grattan, K. T. V. and Roth, B. (2014). Sewerage tunnel leakage detection using a fibre optic moisture-detecting sensor system. Sensors and Actuators A: Physical, 220, pp. 62-68. doi: 10.1016/j.sna.2014.09.018

Bruecker, C. and Mikulich, V. (2017). Sensing of minute airflow motions near walls using pappus-type nature-inspired sensors. PLoS One, 12(6), e0179253. doi: 10.1371/journal.pone.0179253

Brücker, C. and Weidner, C. (2014). Influence of self-adaptive hairy flaps on the stall delay of an airfoil in ramp-up motion. Journal of Fluids and Structures, 47, pp. 31-40. doi: 10.1016/j.jfluidstructs.2014.02.014

Buckney, D., Kovacevic, A. and Stosic, N. (2015). Rotor clearance design and evaluation for an oil injected twin screw compressor. IOP Conference Series: Materials Science and Engineering, 90(1), 012003. doi: 10.1088/1757-899X/90/1/012003

Budidha, K. and Kyriacou, P. A. (2017). In vivo investigation of ear canal pulse oximetry during hypothermia. Journal of Clinical Monitoring and Computing, doi: 10.1007/s10877-017-9975-4

Budidha, K. and Kyriacou, P. A. (2014). Investigation of Pulse Transit Times utilizing multisite reflectance photoplethysmography under conditions of artificially induced peripheral vasoconstriction. 2014 36th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), pp. 1965-1968. doi: 10.1109/EMBC.2014.6943998

Budidha, K. and Kyriacou, P. A. (2015). Investigation of photoplethysmography and arterial blood oxygen saturation from the ear-canal and the finger under conditions of artificially induced hypothermia. Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS, 2015-N, pp. 7954-7957. doi: 10.1109/EMBC.2015.7320237

Budidha, K. and Kyriacou, P. A. (2014). The human ear canal: investigation of its suitability for monitoring photoplethysmographs and arterial oxygen saturation. Physiological Measurement, 35(2), pp. 111-128. doi: 10.1088/0967-3334/35/2/111

Burnay, C., Horkoff, J. and Maiden, N. (2016). Stimulating Stakeholders’ Imagination: New Creativity Triggers for Eliciting Novel Requirements. 2016 IEEE 24th International Requirements Engineering Conference (RE), pp. 36-45. doi: 10.1109/RE.2016.36

Cacciola, P., Tombari, A. and Giaralis, A. ORCID: 0000-0002-2952-1171 (2019). An inerter-equipped vibrating barrier for non-invasive motion control of seismically excited structures. Structural Control and Health Monitoring,

Cai, B., Long-Fei, X. and Fu, F. ORCID: 0000-0002-9176-8159 (2019). Shear Resistance Prediction of post-fire reinforced concrete beams using artificial neural network. International Journal of Concrete Structures and Materials, 13, 46.. doi: 10.1186/s40069-019-0358-8

Cai, B., Zhang, B. and Fu, F. ORCID: 0000-0002-9176-8159 (2019). Reliability analysis of flexural capacity of post-fire reinforced concrete beams. Proceedings of the Institution of Civil Engineers: Structures and Buildings,

Camara, A., Cristantielli, R., Astiz, M. A. and Malaga-Chuquitaype, C. (2017). Design of hysteretic dampers with optimal ductility for the transverse seismic control of cable-stayed bridges. Earthquake Engineering & Structural Dynamics, doi: 10.1002/eqe.2884

Camara, A. and Efthymiou, E. (2016). Deck-tower interaction in the transverse seismic response of cable-stayed bridges and optimum con figurations. Engineering Structures, 124, pp. 494-506. doi: 10.1016/j.engstruct.2016.06.017

Camara, A. ORCID: 0000-0002-1675-2640, Kavrakov, I., Nguyen, K. and Morgenthal, G. (2019). Complete framework of wind-vehicle-bridge interaction with random road surfaces. Journal of Sound and Vibration, doi: 10.1016/j.jsv.2019.06.020

Camara, A. and Ruiz-Teran, A. M. (2015). Multi-mode traffic-induced vibrations in composite ladder-deck bridges under heavy moving vehicles. Journal of Sound and Vibration, 355, pp. 264-283. doi: 10.1016/j.jsv.2015.06.026

Cao, X., Deng, X., Jin, L-Z., Fu, F. ORCID: 0000-0002-9176-8159 and Qian, K. (2019). Experimental study on Shear capacity of cementitious composite RPC Beams using high strength steel. Proceedings of the Institution of Civil Engineers: Structures and Buildings,

Carvalho, R. and Iori, G. (2008). Socioeconomic networks with long-range interactions. Physical Review E, 78(1), doi: 10.1103/PhysRevE.78.016110

Chagnaud, B. P., Brücker, C., Hofmann, M. H. and Bleckmann, H. (2008). Measuring flow velocity and flow direction by spatial and temporal analysis of flow fluctuations. Journal of Neuroscience, 28(17), pp. 4479-4487. doi: 10.1523/JNEUROSCI.4959-07.2008

Chalashkanov, N. M., Kolev, N., Dodd, S. J. and Fothergill, J. (2008). PD pattern recognition using ANFIS. Annual Report - Conference on Electrical Insulation and Dielectric Phenomena, CEIDP, pp. 417-420. doi: 10.1109/CEIDP.2008.4772865

Chassaing, J. C., Sayma, A. I. and Imregun, M. (2008). A combined time and frequency domain approach for acoustic resonance prediction. Journal of Sound and Vibration, 311(3-5), pp. 1100-1113. doi: 10.1016/j.jsv.2007.10.006

Chen, B., Riley, P. H., Abakr, Y. A., Pullen, K. R., Hann, D. B. and Johnson, C. (2013). Design and development of a low-cost, electricity-generating cooking Score-Stove™. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 227(7), pp. 803-813. doi: 10.1177/0957650913498733

Chen, R., Zhao, T., Wu, W., Wu, F., Li, L., Qian, J., Xu, R., Wu, H., Albishri, H. M., Al-Bogami, A. S., El-Hady, D. A., Lu, J. and Amine, K. (2014). Free-Standing Hierarchically Sandwich-Type Tungsten Disulfide Nanotubes/Graphene Anode for Lithium-Ion Batteries. Nano Letters, 14(10), pp. 5899-5904. doi: 10.1021/nl502848z

Chen, T. and Zeng, Y. (2009). Classification of traffic flows into QoS classes by unsupervised learning and KNN clustering. KSII Trans. on Internet and Information Systems, 3(2), pp. 134-146. doi: 10.3837/tiis.2009.02.001

Chen, X., Wan, D-W., Jin, L-Z., Qian, K. and Fu, F. ORCID: 0000-0002-9176-8159 (2019). Experimental studies and Microstructure Analysis for Ultra High-Performance Reactive Powder Concrete. Construction and Building Materials, 229, 116924.. doi: 10.1016/j.conbuildmat.2019.116924

Chenouda, M. and Ayoub, A. (2008). Inelastic Displacement Ratios of Degrading Systems. Journal of Structural Engineering, 134(6), pp. 1030-1045. doi: 10.1061/(ASCE)0733-9445(2008)134:6(1030)

Cho, C-G., Kappos, A. J., Moon, H-J. and Lim, H-J. (2015). Experiments and failure analysis of SHCC and reinforced concrete composite slabs. Engineering Failure Analysis, 56, pp. 320-331. doi: 10.1016/j.engfailanal.2015.01.009

Chrysostomou, C. Z., Kyriakides, N., Kappos, A. J., Kouris, L., Georgiou, E. and Millis, M. (2013). Seismic retrofitting and health monitoring of school buildings of Cyprus. Open Construction and Building Technology Journal, 7, pp. 208-220. doi: 10.2174/1874836801307010208

Chrysostomou, C. Z., Kyriakides, N., Papanikolaou, V.K., Kappos, A. J., Dimitrakopoulos, E. G. and Giouvanidis, A. I. (2015). Vulnerability assessment and feasibility analysis of seismic strengthening of school buildings. Bulletin of Earthquake Engineering, 13(12), pp. 3809-3840. doi: 10.1007/s10518-015-9791-5

Collins, R. (2012). The Bermuda Agreement on Telecommunications 1945. Media History, 18(2), pp. 191-205. doi: 10.1080/13688804.2012.663869

Coombs, W.M., Crouch, R.S. and Augarde, C.E. (2013). A unique Critical State two-surface hyperplasticity model for fine-grained particulate media. Journal of the Mechanics and Physics of Solids, 61(1), pp. 175-189. doi: 10.1016/j.jmps.2012.08.002

Cooper, E. S., Dissado, L. A. and Fothergill, J. (2005). Application of thermoelectric aging models to polymeric insulation in cable geometry. IEEE Transactions on Dielectrics and Electrical Insulation, 12(1), pp. 1-10. doi: 10.1109/TDEI.2005.1394009

Cooper, E. S., Fothergill, J. and Dissado, L. A. (2002). Application of polymer ageing models to power cables. Conference on Electrical Insulation and Dielectric Phenomena (CEIDP), Annual Report, pp. 392-395.

Crerar-Gilbert, A. J., Kyriacou, P. A., Jones, D. P. and Langford, R. M. (2002). Assessment of photoplethysmographic signals for the determination of splanchnic oxygen saturation in humans. Anaesthesia, 57(5), pp. 442-445. doi: 10.1046/j.0003-2409.2001.02453.x

De Angelis, M., Giaralis, A. ORCID: 0000-0002-2952-1171, Petrini, F. and Pietrosanti, D. (2019). Optimal tuning and assessment of inertial dampers with grounded inerter for vibration control of seismically excited base-isolated systems. Engineering Structures, 196, 109250.. doi: 10.1016/j.engstruct.2019.05.091

Demirol, E. and Ayoub, A. (2017). Inelastic Displacement Ratios of SSI Systems. Soil Dynamics and Earthquake Engineering, 96, pp. 104-114.

Dennis, R. and Pullen, K. R. (2013). Development of a wood-fired cooking stove to incorporate a thermo-acoustic engine-generator unit. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 227(7), pp. 740-751. doi: 10.1177/0957650913498735

Dhand, A. and Pullen, K. R. (2015). Analysis of continuously variable transmission for flywheel energy storage systems in vehicular application. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 229(2), pp. 273-290. doi: 10.1177/0954406214533096

Dhand, A. and Pullen, K. R. (2015). Optimal energy management for a flywheel-assisted battery electric vehicle. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 229(12), pp. 1672-1682. doi: 10.1177/0954407014567720

Dhand, A. and Pullen, K. R. (2015). Review of battery electric vehicle propulsion systems incorporating flywheel energy storage. International Journal of Automotive Technology, 16(3), pp. 487-500. doi: 10.1007/s12239-015-0051-0

Diego-Ayala, U., Martinez-Gonzalez, P., McGlashan, N. and Pullen, K. R. (2008). The mechanical hybrid vehicle: an investigation of a flywheel-based vehicular regenerative energy capture system. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 222(11), pp. 2087-2101. doi: 10.1243/09544070JAUTO677

Dimitrakopoulos, E. G., Kappos, A. J. and Makris, N. (2009). Dimensional analysis of yielding and pounding structures for records without distinct pulses. Soil Dynamics and Earthquake Engineering, 29(7), pp. 1170-1180. doi: 10.1016/j.soildyn.2009.02.006

Dimitrakopoulos, E. G., Makris, N. and Kappos, A. J. (2009). Dimensional analysis of the earthquake-induced pounding between adjacent structures. Earthquake Engineering and Structural Dynamics, 38(7), pp. 867-886. doi: 10.1002/eqe.872

Dimitrakopoulos, E. G., Makris, N. and Kappos, A. J. (2011). Dimensional analysis of the earthquake-induced pounding between inelastic structures. Bulletin of Earthquake Engineering, 9(2), pp. 561-579. doi: 10.1007/s10518-010-9220-8

Dissado, L. A., Fothergill, J. and Bromley, K. S. (1998). Discharge-generated electrical fields and electrical tree structures. Conference on Electrical Insulation and Dielectric Phenomena (CEIDP), Annual Report, 2, pp. 649-652. doi: 10.1109/CEIDP.1998.732981

Dissado, L. A., Fothergill, J., Seeley, A., Stevens, G. C., Markey, L., Laurent, C., Teyssedre, G., Nilsson, U. H., Platbrood, G. and Montanari, G. C. (2000). Characterizing HV XLPE cables by electrical, chemical and microstructural measurements on cable peeling: Effects of surface roughness, thermal treatment and peeling location. Electrical Insulation and Dielectric Phenomena, 2000, Annual Report, 1, pp. 136-140. doi: 10.1109/CEIDP.2000.885246

Dissado, L. A., Griseri, V., Peasgood, W., Cooper, E. S., Fukunaga, K. and Fothergill, J. (2006). The decay of space charge in a glassy epoxy resin following voltage removal. IEEE Transactions on Dielectrics and Electrical Insulation, 13(4), pp. 903-916. doi: 10.1109/TDEI.2006.1667752

Divall, S. and Goodey, R.J. (2012). Apparatus for centrifuge modelling of twin-tunnel construction. INTERNATIONAL JOURNAL OF PHYSICAL MODELLING IN GEOTECHNICS, 12(3), pp. 102-111. doi: 10.1680/ijpmg.11.00014

Divall, S. and Goodey, R.J. (2012). Novel apparatus for generating ground movements around sequential twin tunnels in over-consolidated clay. Online publication by Proceedings of the ICE - Geotechnical Engineering, pp. 10-11.

Divall, S. and Goodey, R.J. (2015). Twin-tunnelling-induced ground movements in clay. Proceedings of the Institution of Civil Engineers: Geotechnical Engineering, 168(3), pp. 247-256. doi: 10.1680/geng.14.00054

Divall, S., Taylor, R. N. and Xu, M. (2016). Centrifuge modelling of tunnelling with forepoling. International Journal of Physical Modelling in Geotechnics, 16(2), pp. 83-95. doi: 10.1680/jphmg.15.00019

Erkoyuncu, J. A., Khan, S., Hussain, S. M. F. and Roy, R. ORCID: 0000-0001-5491-7437 (2016). A framework to estimate the cost of No-Fault Found events. International Journal of Production Economics, 173, pp. 207-222. doi: 10.1016/j.ijpe.2015.12.013

Escobar-Restrepo, B., Torres-Villa, R. and Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2018). Evaluation of the Linear Relationship Between Pulse Arrival Time and Blood Pressure in ICU Patients: Potential and Limitations. Frontiers in Physiology, 9, 1848.. doi: 10.3389/fphys.2018.01848

Estelles, S. and Tomas-Rodriguez, M. (2015). Quadrotor multibody modelling by vehiclesim: adaptive technique for oscillations in a PVA control system. Journal of Vibration and Control, doi: 10.1177/1077546315619776

Faghih, F. and Ayoub, A. ORCID: 0000-0002-2670-9662 (2019). Structural performance of steel-concrete sandwich beams with carbon nanofiber reinforcement. Engineering Structures, 187, pp. 177-198. doi: 10.1016/j.engstruct.2019.02.051

Faghih, F., Das, D. and Ayoub, A. (2017). Seismic behavior of fiber reinforced steel-concrete composite systems. Procedia Engineering, 171, pp. 899-908. doi: 10.1016/j.proeng.2017.01.386

Fahad, L. G. and Rajarajan, M. (2015). Integration of discriminative and generative models for activity recognition in smart homes. Applied Soft Computing Journal, 37, pp. 992-1001. doi: 10.1016/j.asoc.2015.03.045

Farsi, M., Erkoyuncu, J. A., Steenstra, D. and Roy, R. ORCID: 0000-0001-5491-7437 (2019). A modular hybrid simulation framework for complex manufacturing system design. Simulation Modelling Practice and Theory, 94, pp. 14-30. doi: 10.1016/j.simpat.2019.02.002

Faruki, M. J., Ab Razak, M. Z., Azzuhri, S. R., Rahman, M. T., Soltanian, M. R. K., Brambilla, G., Rahman, B. M., Grattan, K. T. V., De La Rue, R. M. and Ahmad, H. (2016). Effect of titanium dioxide (TiO₂) nanoparticle coating on the detection performance of microfiber knot resonator sensors for relative humidity measurement. Materials Express, 6(6), pp. 501-508. doi: 10.1166/mex.2016.1342

Favier, J., Pinelli, A. and Piomelli, U. (2011). Control of the separated flow around an airfoil using a wavy leading edge inspired by humpback whale flippers. Comptes Rendus Mecanique, 340(1), pp. 107-114. doi: 10.1016/j.crme.2011.11.004

Favier, J., Revell, A. and Pinelli, A. (2016). Fluid Structure Interaction of Multiple Flapping Filaments Using Lattice Boltzmann and Immersed Boundary Methods. Advances in fluid structure interaction, 133, pp. 167-178. doi: 10.1007/978-3-319-27386-0_10

Favier, J., Revell, A. and Pinelli, A. (2015). Numerical study of flapping filaments in a uniform fluid flow. Journal of Fluids and Structures, 53, pp. 26-35. doi: 10.1016/j.jfluidstructs.2014.11.010

Fonseca, J., Nadimi, S., Reyes-Aldasoro, C. C., O’Sullivan, C. and Coop, M. R. (2016). Image-based investigation into the primary fabric of stress transmitting particles in sand. Soils and Foundations, 56(5), pp. 818-834. doi: 10.1016/j.sandf.2016.08.007

Fonseca, J., O'Sullivan, C., Coop, M. R. and Lee, P. D. (2012). Non-invasive characterization of particle morphology of natural sands. Soils and Foundations, 52(4), pp. 712-722. doi: 10.1016/j.sandf.2012.07.011

Fonseca, J., O'Sullivan, C., Coop, M. R. and Lee, P. D. (2013). Quantifying the evolution of soil fabric during shearing using directional parameters. Géotechnique, 63(6), pp. 487-499. doi: 10.1680/geot.12.P.003

Fonseca, J., O'Sullivan, C., Coop, M. R. and Lee, P. D. (2013). Quantifying the evolution of soil fabric during shearing using scalar parameters. Géotechnique, 63(10), pp. 818-829. doi: 10.1680/geot.11.P.150

Fonseca, J., O'Sullivan, C., Nagira, T., Yasuda, H. and Gourlay, C. M. (2013). In situ study of granular micromechanics in semi-solid carbon steels. Acta Materialia, 61(11), pp. 4169-4179. doi: 10.1016/j.actamat.2013.03.043

Fonseca, J. ORCID: 0000-0002-7654-6005, Riaz, A., Bernal-Sanchez, J., Barreto, D., McDougall, J., Miranda-Manzanares, M., Marinelli, A. and Dimitriadi, V. (2019). Particle–scale interactions and energy dissipation mechanisms in sand–rubber mixtures. Géotechnique Letters, doi: 10.1680/jgele.18.00221

Fonseca, J., Sim, W., Shire, T. and O'Sullivan, C. (2014). Microstructural analysis of sands with varying degrees of internal stability. Geotechnique, 64(5), pp. 405-411. doi: 10.1680/geot.13.T.014

Fothergill, J., Dodd, S. J., Dissado, L. A., Liu, T. and Nilsson, U. H. (2011). The measurement of very low conductivity and dielectric loss in XLPE cables: A possible method to detect degradation due to thermal aging. IEEE Transactions on Dielectrics and Electrical Insulation, 18(5), pp. 1544-1553. doi: 10.1109/TDEI.2011.6032823

Fothergill, J., Nelson, J. K. and Fu, M. (2004). Dielectric properties of epoxy nanocomposites containing TiO2, Al2O3 and ZnO fillers. Annual Report - Conference on Electrical Insulation and Dielectric Phenomena, CEIDP, pp. 406-409. doi: 10.1109/CEIDP.2004.1364273

Fu, F. (2010). 3-D nonlinear dynamic progressive collapse analysis of multi-storey steel composite frame buildings—Parametric study. Engineering Structures, 32(12), pp. 3974-3980. doi: 10.1016/j.engstruct.2010.09.008

Fu, F. (2016). 3D finite element analysis of the whole-building behavior of tall building in fire. Advances in Computational Design, 1(4), pp. 329-344. doi: 10.12989/acd.2016.1.4.329

Fu, F. ORCID: 0000-0002-9176-8159 (2013). Dynamic response and robustness of tall buildings under blast loading. Journal of Constructional Steel Research, 80, pp. 299-307. doi: 10.1016/j.jcsr.2012.10.001

Fu, F. ORCID: 0000-0002-9176-8159 (2006). Non-linear static analysis and design of Tensegrity domes. Steel and Composite Structures, 6(5), pp. 417-433. doi: 10.12989/scs.2006.6.5.417

Fu, F. (2009). Progressive collapse analysis of high-rise building with 3-D finite element modeling method. Journal of Constructional Steel Research, 65(6), pp. 1269-1278. doi: 10.1016/j.jcsr.2009.02.001

Fu, F. ORCID: 0000-0002-9176-8159 (2012). Response of a multi-storey steel composite building with concentric bracing under consecutive column removal scenarios. Journal of Constructional Steel Research, 70, pp. 115-126. doi: 10.1016/j.jcsr.2011.10.012

Fu, F., Lam, D. and Ye, J. Q. (2010). Moment resistance and rotation capacity of semi-rigid composite connections with precast hollowcore slabs. Journal of Constructional Steel Research, 66(3), pp. 452-461. doi: 10.1016/j.jcsr.2009.10.016

Fu, M., Chen, G., Dissado, A. and Fothergill, J. (2007). Influence of thermal treatment and residues on space charge accumulation in XLPE for DC power cable application. IEEE Transactions on Dielectrics and Electrical Insulation, 14(1), pp. 53-64. doi: 10.1109/TDEI.2007.302872

Fu, M., Dissado, L. A., Chen, G. and Fothergill, J. (2008). Space charge formation and its modified electric field under applied voltage reversal and temperature gradient in XLPE cable. IEEE Transactions on Dielectrics and Electrical Insulation, 15(3), pp. 851-860. doi: 10.1109/TDEI.2008.4543123

Ganapathy, H., White, D. C., Cormack, R. S., Kyriacou, P. A., Rybynok, V. and Pal, S. K. (2006). Measuring psychomotor responses. British Journal Of Anaesthesia, 97(3), 431P-442P. doi: 10.1093/bja/ael146

Gao, S., Xu, M., Fu, F. ORCID: 0000-0002-9176-8159 and Guo, L. (2019). Performance of bolted steel-beam to CFST-column joints using stiffened angles in column-removal scenario. Journal of Constructional Steel Research, 159, pp. 459-475. doi: 10.1016/j.jcsr.2019.05.011

Gavaises, M., Andriotis, A., Papoulias, D., Mitroglou, N. and Theodorakakos, A. (2009). Characterization of string cavitation in large-scale Diesel nozzles with tapered holes. Physics of Fluids, 21(5), 052107. doi: 10.1063/1.3140940

Gendy, S. and Ayoub, A. ORCID: 0000-0002-2670-9662 (2018). Dipslacement and Mixed Fibre Beam Elements for Modelling of Slender Reinforced Concrete Structures under Cyclic Loads. Engineering Structures, 173, pp. 620-630. doi: 10.1016/j.engstruct.2018.07.008

Gendy, S. S. F. M. and Ayoub, A. ORCID: 0000-0002-2670-9662 (2018). Displacement and mixed fibre beam elements for modelling of slender reinforced concrete structures under cyclic loads. Engineering Structures, 173, pp. 620-630. doi: 10.1016/j.engstruct.2018.07.008

Ghosh, S. and Rahman, B. M. (2016). An Innovative Straight Resonator Incorporating a Vertical Slot as an Efficient Bio-Chemical Sensor. IEEE Journal on Selected Topics in Quantum Electronics, 23(2), doi: 10.1109/JSTQE.2016.2630299

Ghosh, S. ORCID: 0000-0002-1992-2289 and Rahman, B. M. A. ORCID: 0000-0001-6384-0961 (2018). Design of On-chip Hybrid Plasmonic Mach-Zehnder Interferometer for Temperature and Concentration Detection of Chemical Solution. Sensors and Actuators B: Chemical, 279, pp. 490-502. doi: 10.1016/j.snb.2018.09.070

Giannadakis, E., Gavaises, M. and Arcoumanis, C. (2008). Modelling of cavitation in diesel injector nozzles. Journal of Fluid Mechanics, 616, pp. 153-193. doi: 10.1017/S0022112008003777

Giaralis, A. ORCID: 0000-0002-2952-1171 and Marian, L. (2016). Use of inerter devices for weight reduction of tuned mass-dampers for seismic protection of multi-storey buildings: the tuned mass-damper-interter (TMDI). Proceedings Volume 9799, Active and Passive Smart Structures and Integrated Systems 2016, 9799, doi: 10.1117/12.2219324

Giaralis, A. and Petrini, F. (2017). Wind-induced vibration mitigation in tall buildings using the tuned mass-damper-inerter (TMDI). Journal of Structural Engineering, 143(9), doi: 10.1061/(ASCE)ST.1943-541X.0001863

Giaralis, A. and Spanos, P. D. (2012). Derivation of response spectrum compatible non-stationary stochastic processes relying on Monte Carlo-based peak factor estimation. Earthquakes and Structures, 3(3), pp. 581-609.

Gkatzogias, K.I. and Kappos, A. J. (2015). Deformation-based seismic design of concrete bridges. Earthquakes and Structures, 9(5), pp. 1045-1067. doi: 10.12989/eas.2015.9.5.1045

Gkatzogias, K.I. and Kappos, A. J. ORCID: 0000-0002-5566-5021 (2019). Direct estimation of seismic response in reduced-degree-of-freedom isolation and energy dissipation systems. Earthquake Engineering and Structural Dynamics, doi: 10.1002/eqe.3169

Gkatzogias, K.I. and Kappos, A. J. (2016). Semi-Active Control Systems in Bridge Engineering: A Review of the Current State of Practice. Structural Engineering International, 26(4), pp. 290-301. doi: 10.2749/101686616X14555429844040

Gkoktsi, K. and Giaralis, A. (2015). Effect of frequency domain attributes of wavelet analysis filter banks for structural damage localization using the relative wavelet entropy index. International Journal of Sustainable Materials and Structural Systems, 2(1-2), pp. 134-160. doi: 10.1504/IJSMSS.2015.078365

Gkoktsi, K. and Giaralis, A. ORCID: 0000-0002-2952-1171 (2019). A multi-sensor sub-Nyquist power spectrum blind sampling approach for low-power wireless sensors in operational modal analysis applications. Mechanical Systems and Signal Processing, 116, pp. 879-899. doi: 10.1016/j.ymssp.2018.06.049

Gkoktsi, K., Giaralis, A. ORCID: 0000-0002-2952-1171, Klis, R. P., Dertimanis, V. and Chatzi, E. N. (2019). Output-Only Vibration-Based Monitoring of Civil Infrastructure via Sub-Nyquist/Compressive Measurements Supporting Reduced Wireless Data Transmission. Frontiers in Built Environment, 5, 111.. doi: 10.3389/fbuil.2019.00111

Gonschior, C. P., Klein, K.-F., Heyse, D., Baumann, S., Sun, T. and Grattan, K. T. V. (2013). High power 405 nm diode laser fiber-coupled single-mode system with high long-term stability. Proceedings of SPIE - The International Society for Optical Engineering, 8605, doi: 10.1117/12.2003888

Gorasia, R. J., McNamara, A. M. and Rettura, D. (2012). Reducing driving forces for pressed-in piles. Proceedings of the Institution of Civil Engineers - Geotechnical Engineering, 167(1), pp. 19-27. doi: 10.1680/geng.11.00084

Gourlay, C. M., O'Sullivan, C., Fonseca, J., Yuan, L., Kareh, K., Nagira, T. and Yasuda, H. (2014). Synchrotron radiography studies of shear-induced dilation in semi-solid Al alloys and steels. JOM: Journal of the Minerals, Metals and Materials Society, 66(8), pp. 1415-1424. doi: 10.1007/s11837-014-1029-5

Gowree, E. R., Atkin, C. J. and Gruppetta, S. (2015). A simple digital-optical system to improve accuracy of hot-wire measurements. MEASUREMENT SCIENCE and TECHNOLOGY, 26(9),

Gowree, E. R., Jagadeesh, C. and Atkin, C.J. (2019). Skin friction drag reduction over staggered three dimensional cavities. Aerospace Science and Technology, 84, pp. 520-529. doi: 10.1016/j.ast.2018.11.001

Grenyer, A., Addepalli, S., Zhao, Y., Oakey, L., Erkoyuncu, J. A. and Roy, R. ORCID: 0000-0001-5491-7437 (2018). Identifying challenges in quantifying uncertainty: Case study in infrared thermography. Procedia CIRP, 73, pp. 108-113. doi: 10.1016/j.procir.2018.03.301

Griseri, V., Dissado, L. A., Fothergill, J., Laurent, C. and Teyssedre, G. (2001). Photoluminescence, recombination induced luminescence and electroluminescence in epoxy resin. Journal of Physics D: Applied Physics, 34(16), pp. 2534-2540. doi: 10.1088/0022-3727/34/16/320

Griseri, V., Dissado, L. A., Fothergill, J., Teyssedre, G. and Laurent, C. (2002). Electroluminescence excitation mechanisms in an epoxy resin under divergent and uniform field. IEEE Transactions on Dielectrics and Electrical Insulation, 9(1), pp. 150-160. doi: 10.1109/94.983899

Griseri, V., Fukunaga, K., Laurent, C., Mary, D., Dissado, L. A. and Fothergill, J. (2000). Charge injection, electroluminescence, and ageing of an epoxy resin in high divergent fields. IEE Conference Publication(473), pp. 88-93. doi: 10.1049/cp:20000483

Guo, L., Gao, S. and Fu, F. ORCID: 0000-0002-9176-8159 (2015). Structural performance of semi-rigid composite frame under column loss. Engineering Structures, 95, pp. 112-126. doi: 10.1016/j.engstruct.2015.03.049

Guo, L., Gao, S., Fu, F. and Wang, Y. (2013). Experimental study and numerical analysis of progressive collapse resistance of composite frames. Journal of Constructional Steel Research, 89, pp. 236-251. doi: 10.1016/j.jcsr.2013.07.006

Guo, L., Liu, Y., Fu, F. ORCID: 0000-0002-9176-8159 and Huang, H. (2019). Behavior of axially loaded circular stainless steel tube confined concrete stub columns. Thin-Walled Structures, pp. 66-76. doi: 10.1016/j.tws.2019.02.014

Guo, Z., Ma, Q. ORCID: 0000-0001-5579-6454, Yu, S. and Qin, H. (2018). A Body-Nonlinear Green's Function Method with Viscous Dissipation Effects for Large-Amplitude Roll of Floating Bodies. Applied Sciences, 8(4), 517.. doi: 10.3390/app8040517

Guo, Z., Qin, H. and Ma, Q. ORCID: 0000-0001-5579-6454 (2018). A study on hydrodynamics of the air cushion of a high-speed PACSCAT. European Journal of Mechanics, B/Fluids, 72, pp. 353-363. doi: 10.1016/j.euromechflu.2018.07.004

Habib, K., Jiang, W., Rahman, B. M. and Grattan, K. T. V. (2017). Energy efficiency of iron-boron-silicon metallic glasses in sulfuric acid solutions. Materials Research Express, 4(3), 035201.. doi: 10.1088/2053-1591/aa60dc

Haidar, A., Fothergill, J., Dissado, L. A. and Hopewell, P. (2003). Anomalous dielectric response of very small quantities of virgin, aged and failed silicone oil. IEEE Transactions on Dielectrics and Electrical Insulation, 10(2), pp. 336-342. doi: 10.1109/TDEI.2003.1194120

Halikias, G., Papageorgiou, A. and Karcanias, N. (2010). Non-overshooting stabilisation via state and output feedback. INTERNATIONAL JOURNAL OF CONTROL, 83(6), pp. 1232-1247. doi: 10.1080/00207171003664844

Hawe, G.I., Coates, G., Wilson, D.T. and Crouch, R.S. (2012). Agent-based simulation for large-scale emergency response: A survey of usage and implementation. ACM Computing Surveys, 45(1), doi: 10.1145/2379776.2379784

Hemon, M. C. and Phillips, J. P. (2015). Comparison of foot finding methods for deriving instantaneous pulse rates from photoplethysmographic signals. Journal of Clinical Monitoring and Computing, 30(2), pp. 157-168. doi: 10.1007/s10877-015-9695-6

Henry, K. M., Pase, L., Ramos-Lopez, C. F., Lieschke, G. J., Renshaw, S. A. and Reyes-Aldasoro, C. C. (2013). PhagoSight: an open-source MATLAB® package for the analysis of fluorescent neutrophil and macrophage migration in a zebrafish model. PLoS One, 8(8), e72636. doi: 10.1371/journal.pone.0072636

Hickey, M., Phillips, J. P. and Kyriacou, P. A. (2016). Investigation of peripheral photoplethysmographic morphology changes induced during a hand-elevation study. Journal of Clinical Monitoring and Computing, 30(5), pp. 727-736. doi: 10.1007/s10877-015-9761-0

Hickey, M., Samuels, N., Randive, N., Langford, R. M. and Kyriacou, P. A. (2011). An in vivo investigation of photoplethysmographic signals and preliminary pulse oximetry estimation from the bowel using a new fiberoptic sensor. Anesthesia and Analgesia, 112(5), pp. 1104-1109. doi: 10.1213/ANE.0b013e31820f8df3

Hickey, M., Samuels, N., Randive, N., Langford, R. M. and Kyriacou, P. A. (2012). A new fibre optic pulse oximeter probe for monitoring splanchnic organ arterial blood oxygen saturation. Computer Methods and Programs in Biomedicine, 108(3), pp. 883-888. doi: 10.1016/j.cmpb.2011.03.019

Holmes, G. R., Anderson, S. R., Dixon, G., Robertson, A. L., Reyes-Aldasoro, C. C., Billings, S. A., Renshaw, S. A. and Kadirkamanathan, V. (2012). Repelled from the wound, or randomly dispersed? Reverse migration behaviour of neutrophils characterized by dynamic modelling. Journal of The Royal Society, Interface, 9(77), pp. 3229-3239. doi: 10.1098/rsif.2012.0542

Holé, S., Dissado, L. A., Ajour, M. N. and Fothergill, J. (2005). Space charge behaviour in epoxy laminates under high constant electric field. Journal of Physics D: Applied Physics, 38(16), pp. 2890-2898. doi: 10.1088/0022-3727/38/16/022

Horkoff, J. and Maiden, N. (2015). Creativity and conceptual modeling for requirements engineering. CEUR Workshop Proceedings, 1342, pp. 62-68.

Howey, D. A., Holmes, A. S. and Pullen, K. R. (2011). Measurement and CFD Prediction of Heat Transfer in Air-Cooled Disc-Type Electrical Machines. IEEE Transactions on Industry Applications, 47(4), pp. 1716-1723. doi: 10.1109/TIA.2011.2156371

Howey, D. A., Holmes, A. S. and Pullen, K. R. (2010). Radially resolved measurement of stator heat transfer in a rotor-stator disc system. International Journal of Heat and Mass Transfer, 53(1-3), pp. 491-501. doi: 10.1016/j.ijheatmasstransfer.2009.09.006

Hu, J., Kaparias, I. and Bell, M. G. H. (2009). Spatial econometrics models for congestion prediction with in-vehicle route guidance. IET Intelligent Transport Systems, 3(2), pp. 159-167. doi: 10.1049/iet-its:20070062

Ison, S. and Kaparias, I. (2016). Universities' Transport Study Group UK Annual Conference 2015. Transportation Planning and Technology, 39(1), pp. 1-2. doi: 10.1080/03081060.2015.1113664

Jamalan, M. H. and Fu, F. ORCID: 0000-0002-9176-8159 (2018). Numerical Analysis on Bond Strength of FRP Rebars under Elevated Temperature. IOP Conference Series : Materials Science and Engineering, 371, 01203.. doi: 10.1088/1757-899X/371/1/012013

Javdani, S., Fabian, M., Carlton, J., Sun, T. and Grattan, K. T. V. (2016). Underwater free-vibration analysis of full-scale marine propeller using a Fibre Bragg Grating-based sensor system. IEEE Sensors Journal, 16(4), pp. 946-953. doi: 10.1109/JSEN.2015.2490478

Jebri, B., Phillips, M. L., Knapp, K., Appelboam, A., Reuben, A. and Slabaugh, G. G. (2015). Detection of degenerative change in lateral projection cervical spine x-ray images. Progress in Biomedical Optics and Imaging - Proceedings of SPIE, 9414, p. 941404. doi: 10.1117/12.2082515

Jia, M., Gao, S., Lu, D., Fu, F. ORCID: 0000-0002-9176-8159 and Zhang, H. (2019). Collapse resistance assessment of bucklingrestrained braced steel frames using combined deterministic and probability analysis approach. Ingegneria Sismica, 36(3), pp. 91-118.

Jiang, H., Chen, W., Zhang, Q. and He, L. (2015). Analytical-Solution Based Corner Correction for Transient Thermal Measurement. Journal of Heat Transfer, 137(11), HT-14. doi: 10.1115/1.4030980

Jiang, H., He, L., Zhang, Q. and Wang, L. (2018). On scaling method to investigate high-speed over-tip-leakage flow at low-speed condition. Journal of Engineering for Gas Turbines and Power, 140(6), 062605.. doi: 10.1115/1.4038619

Jiang, W. and Rahman, B. M. ORCID: 0000-0001-6384-0961 (2018). Design of Power-Splitter With Selectable Splitting-Ratio Using Angled and Cascaded MMI-Coupler. IEEE Journal of Quantum Electronics, 54(6), p. 6300509. doi: 10.1109/JQE.2018.2874087

Jin, L-Z., Chen, X., Fu, F., Deng, X-F. and Qian, K. (2019). Shear Strength of Fiber Reinforced Reactive Powder Concrete I-Shaped Beam without Stirrup. Magazine of Concrete Research, doi: 10.1680/jmacr.18.00525

Jones, W. P., Marquis, A. J. and Vogiatzaki, K. (2014). Large-eddy simulation of spray combustion in a gas turbine combustor. Combustion and Flame, 161(1), pp. 222-239. doi: 10.1016/j.combustflame.2013.07.016

Kabir, I. R., Yin, D. and Naher, S. (2016). Two dimensional finite element thermal model of laser surface glazing for H13 tool steel. AIP Conference Proceedings, 1769(1), p. 110003. doi: 10.1063/1.4963512

Kadirkamanathan, V., Anderson, S. R., Billings, S. A., Zhang, X., Holmes, G. R., Reyes-Aldasoro, C. C., Elks, P. M. and Renshaw, S. A. (2012). The neutrophil's eye-view: inference and visualisation of the chemoattractant field driving cell chemotaxis in vivo. PLoS One, 7(4), e35182 -. doi: 10.1371/journal.pone.0035182

Kanthou, C., Dachs, G. U., Lefley, D. V., Steele, A. J., Coralli-Foxon, C., Harris, S., Greco, O., Dos Santos, S. A., Reyes-Aldasoro, C. C., English, W. R. and Tozer, G. M. (2014). Tumour cells expressing single VEGF isoforms display distinct growth, survival and migration characteristics. PLoS One, 9(8), e104015 - ?. doi: 10.1371/journal.pone.0104015

Kaparias, I. and Bell, M. G. H. (2009). Testing a reliable in-vehicle navigation algorithm in the field. IET Intelligent Transport Systems, 3(3), pp. 314-324. doi: 10.1049/iet-its.2008.0075

Kaparias, I., Bell, M. G. H. and Belzner, H. (2008). A new measure of travel time reliability for in-vehicle navigation systems. Journal of Intelligent Transportation Systems: Technology, Planning, and Operations, 12(4), pp. 202-211. doi: 10.1080/15472450802448237

Kaparias, I., Bell, M. G. H., Greensted, J., Cheng, S., Miri, A., Taylor, C. and Mount, B. (2010). Development and implementation of a vehicle-pedestrian conflict analysis method: Adaptation of a vehicle-vehicle technique. Transportation Research Record, 2198, pp. 75-82. doi: 10.3141/2198-09

Kaparias, I., Bell, M. G. H., Miri, A., Chan, C. and Mount, B. (2012). Analysing the perceptions of pedestrians and drivers to shared space. Transportation Research Part F: Traffic Psychology and Behaviour, 15(3), pp. 297-310. doi: 10.1016/j.trf.2012.02.001

Kappos, A. J. (2015). Performance-Based Seismic Design and Assessment of Bridges. Perspectives on European Earthquake Engineering and Seismology, 39, pp. 163-205. doi: 10.1007/978-3-319-16964-4_7

Kappos, A. J. and Antoniadis, P. S. (2010). Evaluation and suggestions for improvement of seismic design procedures for R/C walls in dual systems. Earthquake Engineering & Structural Dynamics, 40(1), pp. 35-53. doi: 10.1002/eqe.1019

Kappos, A. J., Gidaris, I.G. and Gkatzogias, K.I. (2012). Problems associated with direct displacement-based design of concrete bridges with single-column piers, and some suggested improvements. Bulletin of Earthquake Engineering, 10(4), pp. 1237-1266. doi: 10.1007/s10518-012-9354-y

Kappos, A. J., Panagopoulos, G., Sextos, A., Papanikolaou, V.K. and Stylianidis, K. C. (2010). Development of comprehensive earthquake loss scenarios for a Greek and a Turkish city - structural aspects. Earthquakes and Structures, 1(2), pp. 197-214. doi: 10.12989/eas.2010.1.2.197

Kappos, A. J. and Papanikolaou, V.K. (2016). Nonlinear dynamic analysis of masonry buildings and definition of seismic damage states. Open Construction and Building Technology Journal, 10(Sup 2), pp. 192-209. doi: 10.2174/1874836801610010192

Kappos, A. J., Paraskeva, T. S. and Moschonas, I. F. (2013). Response Modification Factors for Concrete Bridges in Europe. Journal of Bridge Engineering, 18(12), pp. 1328-1335. doi: 10.1061/(ASCE)BE.1943-5592.0000487

Kappos, A.J., Gkatzogias, K.I. and Gidaris, I.G. (2013). Extension of direct displacement-based design methodology for bridges to account for higher mode effects. Earthquake Engineering and Structural Dynamics, 42(4), pp. 581-602. doi: 10.1002/eqe.2229

Karathanassis, I. K., Koukouvinis, P. and Gavaises, M. (2017). Comparative evaluation of phase-change mechanisms for the prediction of flashing flows. International Journal of Multiphase Flow, 95, pp. 257-270. doi: 10.1016/j.ijmultiphaseflow.2017.06.006

Karathanassis, I. K., Koukouvinis, P. and Gavaises, M. (2016). Topology and distinct features of flashing flow in an injector nozzle. Atomization and Sprays, 26(12), pp. 1307-1336. doi: 10.1615/AtomizSpr.2016016510

Karathanassis, I. K., Papanicolaou, E., Belessiotis, V. and Bergeles, G. (2017). Design and experimental evaluation of a parabolic-trough concentrating photovoltaic/thermal (CPVT) system with high-efficiency cooling. Renewable Energy, 101, pp. 467-483. doi: 10.1016/j.renene.2016.09.013

Karathanassis, I. K., Papanicolaou, E., Belessiotis, V. and Bergeles, G. (2013). Effect of secondary flows due to buoyancy and contraction on heat transfer in a two-section plate-fin heat sink. International Journal of Heat and Mass Transfer, 61(1), pp. 583-597. doi: 10.1016/j.ijheatmasstransfer.2013.02.028

Karathanassis, I. K., Papanicolaou, E., Belessiotis, V. and Bergeles, G. (2015). Experimental and numerical evaluation of an elongated plate-fin heat sink with three sections of stepwise varying channel width. International Journal of Heat and Mass Transfer, 84, pp. 16-34. doi: 10.1016/j.ijheatmasstransfer.2014.12.013

Karathanassis, I. K., Papanicolaou, E., Belessiotis, V. and Bergeles, G. (2014). Flow and Temperature Fields in Cooling Devices with Embedded Serpentine Tubes. Numerical Heat Transfer, Part A: Applications, 66(4), pp. 349-378. doi: 10.1080/10407782.2014.884864

Karathanassis, I. K., Papanicolaou, E., Belessiotis, V. and Bergeles, G. (2013). Three-dimensional flow effects on forced convection heat transfer in a channel with stepwise-varying width. International Journal of Thermal Sciences, 67, pp. 177-191. doi: 10.1016/j.ijthermalsci.2012.12.016

Karcanias, N., Halikias, G. and Papageorgiou, A. (2010). Strong stability of internal system descriptions. INTERNATIONAL JOURNAL OF CONTROL, 83(1), pp. 182-205. doi: 10.1080/00207170903124669

Karcanias, N. and Limebeeer, D. J. N. (2013). Special Issue dedicated to Sir Alistair G. J. MacFarlane. International Journal of Control, 86(11), pp. 1899-1902. doi: 10.1080/00207179.2013.858831

Karcanias, N. and Vafiadis, D. (2012). Disturbance and Input-Output Decoupling of Systems. Automatica, 48(8), pp. 1650-1657. doi: 10.1016/j.automatica.2012.05.021

Karim, M. R., Rahman, B. M., Azabi, Y. O., Agrawal, A. and Agrawal, G. P. (2015). Ultra-broadband mid-infrared supercontinuum generation through dispersion engineering of chalcogenide microstructured fibers. Journal of the Optical Society of America B, 32(11), pp. 2343-2351. doi: 10.1364/JOSAB.32.002343

Karvounis, A., Ou, J.Y., Wu, W., MacDonald, K.F. and Zheludev, N.I. (2015). Nano-optomechanical nonlinear dielectric metamaterials. Applied Physics Letters, 107(19), doi: 10.1063/1.4935795

Katritsis, D. G., Theodorakakos, A., Pantos, I., Gavaises, M., Karcanias, N. and Efstathopoulos, E. P. (2012). Flow Patterns at Stented Coronary Bifurcations Computational Fluid Dynamics Analysis. Circulation: Cardiovascular Interventions, 5(4), pp. 530-539. doi: 10.1161/CIRCINTERVENTIONS.112.968347

Keißner, A. and Brücker, C. (2012). Directional fluid transport along artificial ciliary surfaces with base-layer actuation of counter-rotating orbital beating patterns. Soft Matter, 8(19), pp. 5342-5349. doi: 10.1039/c2sm25287b

Kerr, O. and Gumm, Z. (2017). Thermal instability in a time-dependent base state due to sudden heating. Journal of Fluid Mechanics, 825, pp. 1002-1034. doi: 10.1017/jfm.2017.408

Khan, S. H., Aristovich, K. Y. and Borovkov, A. I. (2009). Solution of the Forward Problem in Magnetic-Field Tomography (MFT) Based on Magnetoencephalography (MEG). IEEE TRANSACTIONS ON MAGNETICS, 45(3), pp. 1416-1419. doi: 10.1109/TMAG.2009.2012653

Khoo, K. L., Dissado, L. A., Fothergill, J. and Youngs, I. J. (2004). Molecular dynamics simulation of high frequency (1010 to 10 12 Hz) dielectric absorption in the Hollandite Nax(Ti 8-xCrx)O16. Proceedings of the 2004 IEEE International Conference on Solid Dielectrics ICSD 2004, 2, pp. 550-553. doi: 10.1109/ICSD.2004.1350490

Kim, S., Yan, Y., Nouri, J. M. and Arcoumanis, C. (2013). Effects of intake flow and coolant temperature on the spatial fuel distribution in a direct-injection gasoline engine by PLIF technique. Fuel, 106, pp. 737-748. doi: 10.1016/j.fuel.2012.10.002

Kirmse, C. and Brücker, C. (2014). On the jet formation through a leaky glottis. Journal of Fluids and Structures, 50, pp. 137-152. doi: 10.1016/j.jfluidstructs.2014.06.022

Kloukinas, C. and Ozkaya, M. (2014). Realizable, Connector-Driven Software Architectures for Practising Engineers. Communications in Computer and Information Science, 457, pp. 273-289. doi: 10.1007/978-3-662-44920-2_17

Koehler, M., Hess, D. and Bruecker, C. (2015). Flying PIV measurements in a 4-valve IC engine water analogue to characterize the near-wall flow evolution. Measurement Science and Technology, 26(12), 125302.. doi: 10.1088/0957-0233/26/12/125302

Kogan, I., Pacholak, S., Licht, M., Schneider, J., Brücker, C. and Brandt, S. (2015). The invisible fish: hydrodynamic constraints for predator-prey interaction in fossil fish Saurichthys compared to recent actinopterygians. Biology Open, 4(12), pp. 1715-1726. doi: 10.1242/bio.014720

Komninos, N., Phillppou, E. and Pitsillides, A. (2014). Survey in Smart Grid and Smart Home Security: Issues, Challenges and Countermeasures. Communications Surveys & Tutorials, PP(99), doi: 10.1109/COMST.2014.2320093

Kong, D. and Fonseca, J. ORCID: 0000-0002-7654-6005 (2019). On the kinematics of shelly carbonate sand using X-ray micro tomography. Engineering Geology, 261, 105268.. doi: 10.1016/j.enggeo.2019.105268

Kong, D. and Fonseca, J. (2018). Quantification of the morphology of shelly carbonate sands using 3D images. Géotechnique, 68(3), pp. 249-261. doi: 10.1680/jgeot.16.P.278

Koukouvinis, P., Naseri, H. and Gavaises, M. (2017). Performance of turbulence and cavitation models in prediction of incipient and developed cavitation. International Journal of Engine Research, 18(4), pp. 333-350. doi: 10.1177/1468087416658604

Kouris, L.A.S. and Kappos, A. J. (2015). Fragility curves and loss estimation for traditional timber-framed masonry buildings in Lefkas, Greece. Computational Methods in Applied Sciences, 37, pp. 199-233. doi: 10.1007/978-3-319-16130-3_8

Kouris, L.A.S. and Kappos, A. J. (2014). A practice-oriented model for pushover analysis of a class of timber-framed masonry buildings. Engineering Structures, 75, pp. 489-506. doi: 10.1016/j.engstruct.2014.06.012

Kouris, L.A.S. and Kappos, A.J. (2012). Detailed and simplified non-linear models for timber-framed masonry structures. JOURNAL OF CULTURAL HERITAGE, 13(1), pp. 47-58. doi: 10.1016/j.culher.2011.05.009

Kouris, L.A.S., Meireles, H., Bento, R. and Kappos, A. J. (2014). Simple and complex modelling of timber-framed masonry walls in Pombalino buildings. Bulletin of Earthquake Engineering, 12(4), pp. 1777-1803. doi: 10.1007/s10518-014-9586-0

Kovacevic, A. ORCID: 0000-0002-8732-2242 (2005). Boundary adaptation in grid generation for CFD analysis of screw compressors. International Journal for Numerical Methods in Engineering, 64(3), pp. 401-426. doi: 10.1002/nme.1376

Kovacevic, A. and Stosic, N. (2015). Analytical Grid Generation for accurate representation of clearances in CFD for Screw Machines. IOP Conference Series: Materials Science and Engineering, 90(1), 012008. doi: 10.1088/1757-899X/90/1/012008

Kovacevic, A., Stosic, N. and Kethidi, M. (2014). Deforming grid generation and CFD analysis of variable geometry screw compressors. Computers & Fluids, 99, pp. 124-141. doi: 10.1016/j.compfluid.2014.04.024

Kovacevic, A. ORCID: 0000-0002-8732-2242, Stosic, N., Mujic, E. and Smith, I. K. ORCID: 0000-0003-1524-9880 (2007). CFD Integrated Design of Screw Compressors. Engineering Applications of Computational Fluid Mechanics, 1(2), pp. 96-108. doi: 10.1080/19942060.2007.11015185

Kovacevic, A., Stosic, N. and Smith, I. K. (2017). Editorial. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 231(1), p. 3. doi: 10.1177/0954408916685022

Kovacevic, A. ORCID: 0000-0002-8732-2242, Stosic, N. and Smith, I. K. ORCID: 0000-0003-1524-9880 (2004). A numerical study of fluid-solid interaction in screw compressors. International Journal on Computer Application in Technology, 21(4), pp. 148-158. doi: 10.1504/IJCAT.2004.006651

Krishnasamy, J., Ponnusami, S. A. ORCID: 0000-0002-2143-8971, Turteltaub, S. and van der Zwaag, S. (2019). Computational investigation of porosity effects on fracture behavior of thermal barrier coatings. Ceramics International, 45(16), pp. 20518-20527. doi: 10.1016/j.ceramint.2019.07.031

Kyriacou, P. A. (2012). Development and in vitro evaluation of an artificial spinal disc loading cell. 2012 Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), pp. 4887-4890. doi: 10.1109/EMBC.2012.6347089

Kyriacou, P. A. (2005). Pulse oximetry in the oesophagus. Physiological Measurement, 27(1), doi: 10.1088/0967-3334/27/1/R01

Kyriacou, P. A., Choi, D. M., Moye, A. R., Langford, R. M. and Jones, D. P. (1999). Design and evaluation of a new electro-optical system for monitoring oesophageal photoplethysmographs. Medical & Biological Engineering & Computing, 37(1),

Kyriacou, P. A., Hickey, M. and Phillips, J. P. (2013). Pulse oximetry of body cavities and organs. Proceedings of 35th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), pp. 2664-2667. doi: 10.1109/EMBC.2013.6610088

Kyriacou, P. A., Jones, D. P., Langford, R. M. and Petros, A. J. (2007). Pilot study in neonatal and pediatric oesophageal pulse oximetry. Anesthesia and Analgesia, 105(6), S106-S107. doi: 10.1213/01.ane.0000290771.60068.d5

Kyriacou, P. A., Moye, A. R., Gregg, A., Choi, D. M., Langford, R. M. and Jones, D. P. (1999). A system for investigating oesophageal photoplethysmographic signals in anaesthetised patients. Medical & Biological Engineering & Computing, 37(5), pp. 639-643. doi: 10.1007/BF02513360

Kyriacou, P. A., Pal, S. K., Langford, R. and Jones, D. P. (2006). Electro-optical techniques for the investigation of oesophageal photoplethysmographic signals and blood oxygen saturation in burns. Measurement & Control, 39(3), pp. 77-79. doi: 10.1177/002029400603900302

Kyriacou, P. A., Powell, S., Langford, R. M. and Jones, D. P. (2002). Esophageal pulse oximetry utilizing reflectance photoplethysmography. IEEE Transactions on Biomedical Engineering, 49(11), pp. 1360-1368. doi: 10.1109/TBME.2002.804584

Kyriacou, P. A., Powell, S., Langford, R. M. and Jones, D. P. (2002). Investigation of oesophageal photoplethysmographic signals and blood oxygen saturation measurements in cardiothoracic surgery patients. Physiological Measurement, 23(3), pp. 533-546. doi: 10.1088/0967-3334/23/3/305

Kyriacou, P. A., Powell, S. L., Jones, D. P. and Langford, R. M. (2003). Evaluation of oesophageal pulse oximetry in patients undergoing cardiothoracic surgery. Anaesthesia, 58(5), pp. 422-427. doi: 10.1046/j.1365-2044.2003.03091.x

Kyriacou, P. A., Shafqat, K. and Pal, S. K. (2007). Investigation of the effect of peripheral perfusion on photoplethysmography and blood oxygen saturation during blood pressure cuff-induced hypoperfusion. British Journal of Anaesthesia, 98(2), 293P-294P. doi: 10.1093/bja/ael319

Kyriacou, P. A., Shafqat, K. and Pal, S. K. (2007). Photoplethysmography and blood oxygen saturation during blood pressure cuff-induced hypoperfusion. Anesthesia and Analgesia, 105(6), S107-S108. doi: 10.1213/01.ane.0000290771.60068.d5

Kyriacou, P. A., Wardhaugh, A., Jones, D. P., Langford, R. M. and Petros, A. J. (2002). Investigation of photoplethysmographic signals in neonatal and paediatric patients. Journal of Intensive Care Medicine, 28, S111-S111. doi: 10.1007/s00134-002-1455-7

Kyriazis, N., Koukouvinis, P. and Gavaises, M. (2017). Numerical investigation of bubble dynamics using tabulated data. International Journal of Multiphase Flow, 93, pp. 158-177. doi: 10.1016/j.ijmultiphaseflow.2017.04.004

Köhnen, C., Überall, C., Rajarajan, M., Jager, R. and Rakocevic, V. (2015). Autonomous QoS Management and Policing in Unmanaged Local Area Networks. Journal of Computer Networks and Communications, 2015, e790375. doi: 10.1155/2015/790375

Labib, M., Moslehy, Y. and Ayoub, A. (2013). Behavior of Reinforced Concrete Membrane Elements Subjected to Bidirectional Shear Loads. ACI Structural Journal, 110(6), pp. 1033-1043.

Labib, M., Moslehy, Y. and Ayoub, A. (2017). Softening Coefficient of Reinforced Concrete Elements Subjected to Three-Dimensional Loads. Magazine of Concrete Research, doi: 10.1680/jmacr.17.00094

Le, B., Goodey, R.J. and Divall, S. ORCID: 0000-0001-9212-5115 (2019). Subsurface ground movements due to circular shaft construction. Soils and Foundations, doi: 10.1016/j.sandf.2019.03.013

Le, B. T., Nadimi, S., Goodey, R.J. and Taylor, R.N. (2016). System to measure three-dimensional movements in physical models. Géotechnique Letters, 6(4), pp. 1-7. doi: 10.1680/jgele.16.00073

Le, B. T. and Taylor, R. N. ORCID: 0000-0002-8103-0433 (2018). Ground response to tunnelling incorporating a soil reinforcement system. Canadian Geotechnical Journal, doi: 10.1139/cgj-2018-0075

Le, B. T. and Taylor, R. N. ORCID: 0000-0002-8103-0433 (2018). Response of clay soil to three-dimensional tunnelling simulation in centrifuge models. Soils and Foundations, 58(4), pp. 808-818. doi: 10.1016/j.sandf.2018.03.008

Leandro, D., Ams, M., Lopez-Amo, M., Sun, T. and Grattan, K. T. V. (2015). Simultaneous Measurement of Strain and Temperature Using a Single Emission Line. Journal of Lightwave Technology, 33(12), pp. 2426-2431. doi: 10.1109/JLT.2014.2374531

Lei, W., Song, Z., Yi, J., Li, J., Fu, F. ORCID: 0000-0002-9176-8159 and Qian, K. (2019). Experimental Studies on Bond Performance of BFRP bars reinforced Coral Aggregate Concrete. International Journal of Concrete Structures and Materials,

Leventides, J. and Karcanias, N. (2008). Structured squaring down and zero assignment. International Journal of Control, 81(2), pp. 294-306. doi: 10.1080/00207170701413843

Leventides, J., Karcanias, N., Meintanis, I. and Milonidis, E. (2014). Reduced sensitivity solutions to global linearisation of the pole assignment map. Proceedings of the 19th IFAC World Congress, 2014, 19, pp. 4727-4732. doi: 10.3182/20140824-6-ZA-1003.02389

Li, Q., Wang, J. ORCID: 0000-0003-1821-2362, Yan, S. ORCID: 0000-0001-8968-6616, Gong, J. and Ma, Q. ORCID: 0000-0001-5579-6454 (2018). A zonal hybrid approach coupling FNPT with OpenFOAM for modelling wave-structure interactions with action of current. Ocean Systems Engineering, 8(4), pp. 381-407. doi: 10.12989/ose.2018.8.4.381

Li, Y., Gong, J., Ma, Q. ORCID: 0000-0001-5579-6454 and Yan, S. ORCID: 0000-0001-8968-6616 (2018). Effects of the terms associated with phi(zz) in free surface condition on the attitudes and resistance of different ships. Engineering Analysis with Boundary Elements, 95, pp. 266-285. doi: 10.1016/j.enganabound.2018.08.006

Li, Y., Hu, Z., Weng, T., Fonseca, J. and Zhang, X. (2014). Experimental study on the vertical deformation of sand caused by cyclic withdrawal and recharging of groundwater. Engineering Geology, 183, pp. 247-253. doi: 10.1016/j.enggeo.2014.08.020

Liu, D., Fayu, W. and Fu, F. ORCID: 0000-0002-9176-8159 (2018). Experimental Research on the Shear Connectors in Foam Concrete. International Journal of Concrete Structures and Materials, doi: 10.1186/s40069-018-0281-4

Liu, F., Fu, F., Wang, Y. and Liu, Q. (2017). Fire performance of non-load-bearing light-gauge slotted steel stud walls. Journal of Constructional Steel Research, 137, pp. 228-241. doi: 10.1016/j.jcsr.2017.06.034

Liu, J., Khan, U., Coleman, J., Fernandez, B., Rodriguez, P., Naher, S. and Brabazon, B. (2016). Graphene Oxide and Graphene Nanosheet Reinforced Aluminium Matrix Composites: powder synthesis and prepared composite characteristics. Materials & Design, 94, pp. 87-94. doi: 10.1016/j.matdes.2016.01.031

Liu, Y. and Xu, H. (2014). Entropic approximation for mathematical programs with robust equilibrium constraints. SIAM Journal on Optimization, 24(3), pp. 933-958. doi: 10.1137/130931011

Llado, X., Imiya, A., Mason, D., Reyes-Aldasoro, C. C., Aoki, K., Kudo, M., Zhang, Y. and Argyriou, V. (2015). Corrigendum to 'Homage to Professor Maria Petrou' [ Pattern Recognition Letters 48 (2014) 2-7].. Pattern Recognition Letters, 54(1), p. 109. doi: 10.1016/j.patrec.2015.01.006

Lockett, R. D., Fatmi, Z., Kuti, O. and Price, R. (2016). An Optical Characterization of the Effect of High-Pressure Hydrodynamic Cavitation on Diesel. SAE Technical Papers, pp. 2014-01.

Lu, J., Yang, Z., Wu, H., Wu, W., Liu, F., Xu, S., Yang, H. and Yan, S. (2016). Model experiment on the dynamic process of oil leakage from the double hull tanker. Journal of Loss Prevention in the Process Industries, 43, pp. 174-180. doi: 10.1016/j.jlp.2016.05.013

Ma, Q. and Yan, S. (2009). QALE-FEM for numerical modelling of non-linear interaction between 3D moored floating bodies and steep waves. INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, 78(6), pp. 713-756. doi: 10.1002/nme.2505

Ma, Q. and Yan, S. (2006). Quasi ALE finite element method for nonlinear water waves. Journal of Computational Physics, 212(1), pp. 52-72. doi: 10.1016/j.jcp.2005.06.014

Ma, Q., Zhou, Y. and Yan, S. (2016). A review on approaches to solving Poisson’s equation in projection-based meshless methods for modelling strongly nonlinear water waves. Journal of Ocean Engineering and Marine Energy, 2(3), pp. 279-299. doi: 10.1007/s40722-016-0063-5

Madhav, K. V. and Kovacevic, A. (2015). Economics of water injected air screw compressor systems. IOP Conference Series: Materials Science and Engineering, 90(1), 012012. doi: 10.1088/1757-899X/90/1/012012

Mamouei, M. H., Kaparias, I. and Halikias, G. (2016). A quantitative approach to behavioural analysis of drivers in highways using particle filtering. Transportation Planning and Technology, 39(1), doi: 10.1080/03081060.2015.1108084

Manu, P., Ankrah, N., Proverbs, D. and Suresh, S. (2013). Mitigating the health and safety influence of subcontracting in construction: The approach of main contractors. International Journal of Project Management, 31(7), pp. 1017-1026. doi: 10.1016/j.ijproman.2012.11.011

Marchi, A., Nouri, J. M., Yan, Y. and Arcoumanis, C. (2010). Spray stability of outwards opening pintle injectors for stratified direct injection spark ignition engine operation. International Journal of Engine Research, 11(6), pp. 413-437. doi: 10.1243/14680874JER605

Marian, L. and Giaralis, A. (2014). Optimal design of a novel tuned mass-damper-inerter (TMDI) passive vibration control configuration for stochastically support-excited structural systems. Probabilistic Engineering Mechanics, 38, pp. 156-164. doi: 10.1016/j.probengmech.2014.03.007

Marichal, N., Tomas-Rodriguez, M., Hernandez, A., Castillo, S. and Campoy, P. (2013). Vibration reduction for vision systems on board UAV using a neuro-fuzzy controller. Journal of Vibration and Control, 20(15), pp. 2243-2253. doi: 10.1177/1077546313479632

Mattheus, W. and Brücker, C. (2011). Asymmetric glottal jet deflection: differences of two- and three-dimensional models. The Journal of the Acoustical Society of America (JASA), 130(6), EL373 -EL379. doi: 10.1121/1.3655893

May, J. M., Kyriacou, P. A., Honsel, M. and Petros, A. J. (2012). Photoplethysmographic and SpO(2) readings from the neonatal anterior fontanelle: a case study. Conference proceedings : ... Annual International Conference of the IEEE Engineering in Medicine and Biology Society. IEEE Engineering in Medicine and Biology Society., 2012, pp. 1619-1622. doi: 10.1109/EMBC.2012.6346255

May, J.M., Hickey, M., Triantis, I., Palazidou, E. and Kyriacou, P. A. (2014). Optical analysis of Lithium Carbonate: Towards the development of a Portable Lithium Blood Level analyzer for Bipolar Disorder Patients. 2014 36th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), pp. 2077-2080. doi: 10.1109/EMBC.2014.6944025

May, J.M., Hickey, M., Triantis, I., Palazidou, E. and Kyriacou, P. A. (2015). Spectrophotometric analysis of Lithium Carbonate used for Bipolar Disorder. Biomedical Optics Express, 6(3), pp. 1067-1073. doi: 10.1364/BOE.6.001067

May, J.M., Kyriacou, P. A., Honsel, M. and Petros, A. J. (2014). Investigation of photoplethysmographs from the anterior fontanelle of neonates. Physiological Measurement, 35(10), pp. 1961-1973. doi: 10.1088/0967-3334/35/10/1961

May, J.M., Phillips, J. P., Fitchat, T., Ramaswamy, S., Snidvongs, S. and Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2019). A Novel Photoplethysmography Sensor for Vital Signs Monitoring from the Human Trachea. Biosensors, 9(4), 119.. doi: 10.3390/bios9040119

McCague, C., Fabian, M., Karimi, M., Bravo, M., Jaroszewicz, L. R., Mergo, P., Sun, T. and Grattan, K. T. V. (2014). Novel Sensor Design Using Photonic Crystal Fibres for Monitoring the Onset of Corrosion in Reinforced Concrete Structures. Journal of Lightwave Technology, 32(5), pp. 891-896. doi: 10.1109/JLT.2013.2293120

McNamara, A. M. and Gorasia, Rohit J. (2016). High-capacity ribbed pile foundations. Proceedings of the Institution of Civil Engineers: Geotechnical Engineering, 169(3), pp. 264-275. doi: 10.1680/jgeen.15.00073

McNamara, A. M., Suckling, T., McKinley, B. and Stallebrass, S. E. (2014). A field trial of a reusable, hollow, cast-in-situ pile. Proceedings of the ICE - Geotechnical Engineering, 167(4), pp. 390-401. doi: 10.1680/geng.12.00102

McNamara, A. M. and Taylor, R.N. (2004). The influence of enhanced excavation base stiffness on prop loads and ground movements during basement construction. The Structural Engineer, 82(4), pp. 30-36.

Mergos, P. E. ORCID: 0000-0003-3817-9520 (2018). Efficient optimum seismic design of reinforced concrete frames with nonlinear structural analysis procedures. Structural and Multidisciplinary Optimization, doi: 10.1007/s00158-018-2036-x

Mergos, P.E. (2017). Contribution to sustainable seismic design of reinforced concrete members through embodied CO2 emissions optimization. Structural Concrete, doi: 10.1002/suco.201700064

Mergos, P.E. ORCID: 0000-0003-3817-9520 (2019). Minimum cost performance-based seismic design of reinforced concrete frames with pushover and nonlinear response-history analysis. Structural Concrete, doi: 10.1002/suco.201900211

Mergos, P.E. (2016). Optimum seismic design of reinforced concrete frames according to Eurocode 8 and fib Model Code 2010. Earthquake Engineering and Structural Dynamics, doi: 10.1002/eqe.2851

Mergos, P.E. and Beyer, K. (2015). Displacement-based seismic design of symmetric single-storey wood-frame buildings with the aid of N2 method. Frontiers in Built Environment, 1, .10. doi: 10.3389/fbuil.2015.00010

Mergos, P.E. and Beyer, K. (2014). Loading protocols for European regions of low to moderate seismicity. Bulletin of Earthquake Engineering, pp. 1-24. doi: 10.1007/s10518-014-9603-3

Mergos, P.E. and Beyer, K. (2014). Modelling shear-flexure interaction in equivalent frame models of slender RC walls. The Structural Design of Tall and Special Buildings, 23(15), pp. 1171-1189. doi: 10.1002/tal.1114

Mergos, P.E. and Beyer, K. (2014). Modelling shear-flexure interaction in equivalent frame models of slender reinforced concrete walls. Structural Design of Tall and Special Buildings, 23(15), pp. 1171-1189. doi: 10.1002/tal.1114

Mergos, P.E. and Kappos, A. J. (2013). Analytical study on the influence of distributed beam vertical loading on seismic response of frame structures. Earthquake and Structures, 5(2), pp. 239-259.

Mergos, P.E. and Kappos, A. J. (2015). Estimating fixed-end rotations of reinforced concrete members at yielding and ultimate. Structural Concrete, 16(4), pp. 537-545. doi: 10.1002/suco.201400067

Mergos, P.E. and Kappos, A. J. (2010). Seismic damage analysis including inelastic shear-flexure interaction. Bulletin of Earthquake Engineering, 8(1), pp. 27-46. doi: 10.1007/s10518-009-9161-2

Mergos, P.E. and Kappos, A. J. (2015). A combined damage index for seismic assessment of non-ductile reinforced concrete structures. Civil-Comp Proceedings, 108, 144.. doi: 10.4203/ccp.108.144

Mergos, P.E. and Kappos, A. J. (2013). A combined local damage index for seismic assessment of existing RC structures. Earthquake Engineering and Structural Dynamics, 42(6), pp. 833-852. doi: 10.1002/eqe.2247

Mergos, P.E. and Kappos, A. J. (2008). A distributed shear and flexural flexibility model with shear-flexure interaction for R/C members subjected to seismic loading. Earthquake Engineering & Structural Dynamics, 37(12), pp. 1349-1370. doi: 10.1002/eqe.812

Mergos, P.E. and Kappos, A.J. (2012). A gradual spread inelasticity model for R/C beam-columns, accounting for flexure, shear and anchorage slip. ENGINEERING STRUCTURES, 44, pp. 94-106. doi: 10.1016/j.engstruct.2012.05.035

Mergos, P.E. and Kawashima, K. (2005). Rocking isolation of a typical bridge pier on spread foundation. Journal of Earthquake Engineering, 9(Sup2), pp. 395-414. doi: 10.1142/S1363246905002456

Mergos, P.E. ORCID: 0000-0003-3817-9520 and Mantoglou, F. (2019). Optimum design of reinforced concrete retaining walls with the flower pollination algorithm. Structural and Multidisciplinary Optimization, doi: 10.1186/s12889-019-7442-5

Mergos, P.E. ORCID: 0000-0003-3817-9520 and Sextos, A. (2019). Selection of earthquake ground motions for multiple objectives using genetic algorithms. Engineering Structures, 187, pp. 414-427. doi: 10.1016/j.engstruct.2019.02.067

Miao, X., Zhang, Q., Wang, L., Jiang, H. and Qi, H. (2015). Application of riblets on turbine blade endwall secondary flow control. Journal of Propulsion and Power, 31(6), pp. 1578-1585. doi: 10.2514/1.B35549

Micic, T. (2016). Risk reality vs risk perception. Journal of Risk Research, 19(10), pp. 1261-1274. doi: 10.1080/13669877.2015.1121900

Mikulich, V. and Brücker, C. (2014). Cavitation by spall fracture of solid walls in liquids. Experiments in Fluids, 55, 1785.. doi: 10.1007/s00348-014-1785-6

Mikulich, V. and Brücker, C. (2013). Flow and motion behavior of particle suspensions in shear flow over a rough surface. WIT Transactions on Engineering Sciences, 79, pp. 263-272. doi: 10.2495/MPF130221

Mikulich, V., Nassauer, B., Kuna, M. and Brücker, C. (2015). Experimental and numerical study of interaction between particle loaded fluid and a rough wall with micropillars. Tribology International, 83(March), pp. 42-50. doi: 10.1016/j.triboint.2014.10.009

Milojevic, M. and Rakocevic, V. (2014). Distributed Road Traffic Congestion Quantification Using Cooperative VANETs. 13th Annual Mediterranean Ad Hoc Networking Workshop (MED-HOC-NET), pp. 203-210. doi: 10.1109/MedHocNet.2014.6849125

Mirshahi, M., Yan, Y. and Nouri, J. M. (2015). Influence of cavitation on near nozzle exit spray. Journal of Physics: Conference Series,, 656(1), 012093. doi: 10.1088/1742-6596/656/1/012093

Mishra, J. K., Priye, V. and Rahman, B. M. (2016). Augmenting data rate performance for higher order modulation in triangular index profile multicore fiber interconnect. Optics Communications, 371, pp. 40-46. doi: 10.1016/j.optcom.2016.03.038

Mitolidis, G. J., Salonikios, T. N. and Kappos, A. J. (2012). Test results and strength estimation of R/C beams strengthened against flexural or shear failure by the use of SRP and CFRP. Composites Part B: Engineering, 43(3), pp. 1117-1129. doi: 10.1016/j.compositesb.2011.11.034

Mitolidis, G. J., Salonikios, T. N. and Kappos, A. J. (2012). Tests on RC Beams Strengthened at the Span with Externally Bonded Polymers Reinforced with Carbon or Steel Fibers. Journal of Composites for Construction, 16(5), pp. 551-562. doi: 10.1061/(ASCE)CC.1943-5614.0000281

Moghaddam, E.R., Long, C. and Sayma, A. I. (2013). A numerical investigation of moment coefficient and flow structure in a rotor-stator cavity with rotor-mounted bolts. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY, 227(3), doi: 10.1177/0957650912473543

Morar, N., Roy, R. ORCID: 0000-0001-5491-7437, Mehnen, J., Nicholls, J. R. and Gray, S. (2017). The effect of trepanning speed of laser drilled acute angled cooling holes on the high temperature low cycle corrosion fatigue performance of CMSX-4 at 850 °C. International Journal of Fatigue, 102, pp. 112-120. doi: 10.1016/j.ijfatigue.2017.04.017

Morar, N. I., Roy, R. ORCID: 0000-0001-5491-7437, Mehnen, J., Marithumu, S., Gray, S., Roberts, T. and Nicholls, J. (2018). Investigation of recast and crack formation in laser trepanning drilling of CMSX-4 angled holes. The International Journal of Advanced Manufacturing Technology, 95(9-12), pp. 4059-4070. doi: 10.1007/s00170-017-1481-9

Moschonas, I. F. and Kappos, A. J. (2012). Assessment of concrete bridges subjected to ground motion with an arbitrary angle of incidence: static and dynamic approach. Bulletin of Earthquake Engineering, 11(2), pp. 581-605. doi: 10.1007/s10518-012-9395-2

Moustakidis, S ORCID: 0000-0002-1090-2177, Meintanis, I. ORCID: 0000-0002-1920-1801, Halikias, G. ORCID: 0000-0003-1260-1383 and Karcanias, N. ORCID: 0000-0002-1889-6314 (2019). An Innovative Control Framework for District Heating Systems: Conceptualisation and Preliminary Results. Resources, 8(1), 27.. doi: 10.3390/resources8010027

Moye, A. R., Kyriacou, P. A., Gregg, A., Jones, D. P. and Langford, R. M. (1999). Photoplethysmographic (PPG) signals recorded from the human oesophagus. British Journal of Anaesthesia, A-57,

Mujic, E., Kovacevic, A., Stosic, N. and Smith, I. K. (2011). Noise generation and suppression in twin screw compressors. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 225(2), pp. 127-148. doi: 10.1177/1464419311403875

Mujic, E., Kovacevic, A., Stosic, N. and Smith, I. K. (2008). The influence of port shape on gas pulsations in a screw compressor discharge chamber. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 222(4), pp. 211-223. doi: 10.1243/09544089JPME205

Mullapudi, T. and Ayoub, A. (2013). Analysis of Reinforced Concrete Columns Subjected to Combined Axial, Flexure, Shear, and Torsional Loads. Journal of Structural Engineering, 139(4), pp. 561-573. doi: 10.1061/(ASCE)ST.1943-541X.0000680

Nadimi, S. and Fonseca, J. (2016). Enhancing soil sample preparation by thermal cycling. Géotechnique, 66(11), pp. 953-958. doi: 10.1680/jgeot.15.T.033

Nadimi, S. and Fonseca, J. ORCID: 0000-0002-7654-6005 (2019). Image based simulation of one-dimensional compression tests on carbonate sand. Meccanica, 54(4-5), pp. 697-706. doi: 10.1007/s11012-018-0923-2

Nadimi, S. and Fonseca, J. (2017). Single-Grain Virtualization for Contact Behavior Analysis on Sand. Journal of Geotechnical and Geoenvironmental Engineering, 143(9), 06017010.. doi: 10.1061/(ASCE)GT.1943-5606.0001740#sthash.NgJgwZ5K.dpuf

Nadimi, S. and Fonseca, J. (2017). A micro finite element model for soil behaviour: Numerical validation. Géotechnique, doi: 10.1680/jgeot.16.P.163

Nadimi, S. and Fonseca, J. (2017). A micro finite-element model for soil behaviour. Géotechnique, 68(4), pp. 290-302. doi: 10.1680/jgeot.16.P.147

Nadimi, S., Fonseca, J. ORCID: 0000-0002-7654-6005, Andò, E. and Viggiani, G. (2019). A micro finite element model for soil behaviour: experimental evaluation for sand under triaxial compression. Géotechnique, doi: 10.1680/jgeot.18.t.030

Naher, S., Orpen, D., Brabazon, D., Poulsen, C.R. and Morshed, M.M. (2010). Effect of micro-channel geometry on fluid flow and mixing. Simulation Modelling Practice and Theory, 19(4), pp. 1088-1095. doi: 10.1016/j.simpat.2010.12.008

Narang, B., Phillips, M. L., Knapp, K., Appelboam, A., Reuben, A. and Slabaugh, G. G. (2015). Semi-automatic delineation of the spino-laminar junction curve on lateral X-ray radiographs of the cervical spine. Progress in Biomedical Optics and Imaging - Proceedings of SPIE, 9413, 94132P. doi: 10.1117/12.2082036

Nelson, J. K. and Fothergill, J. (2004). Internal charge behaviour of nanocomposites. Nanotechnology, 15(5), pp. 586-595. doi: 10.1088/0957-4484/15/5/032

Nezhad, H. Y., Zhao, Y., Liddel, P. D., Marchante, V. and Roy, R. ORCID: 0000-0001-5491-7437 (2017). A novel process-linked assembly failure model for adhesively bonded composite structures. CIRP Annals, 66(1), pp. 29-32. doi: 10.1016/j.cirp.2017.04.103

Nguyen, T.H., Lin, Y. C., Chen, C. T., Surre, F., Venugopalan, T., Sun, T. and Grattan, K. T. V. (2009). Fibre optic chloride sensor based on fluorescence quenching of an acridinium dye. Proceedings of SPIE, 7503, doi: 10.1117/12.835607

Nguyen, T.H., Sun, T., Grattan, K. T. V. and Hardwick, S. (2010). A fibre-optic chemical sensor for the detection of cocaine. Proceedings of SPIE, 76531V, doi: 10.1117/12.866496

Nguyen, T.H., Venugopala, T., Chen, S., Sun, T., Grattan, K. T. V., Taylor, S.E., Basheer, P.A.M. and Long, A.E. (2014). Fluorescence based fibre optic pH sensor for the pH 10-13 range suitable for corrosion monitoring in concrete structures. Sensors and Actuators, B: Chemical, 191, pp. 498-507. doi: 10.1016/j.snb.2013.09.072

Nikolopoulos, N., Theodorakakos, A. and Bergeles, G. (2009). Off-centre binary collision of droplets: A numerical investigation. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 52(19-20), pp. 4160-4174. doi: 10.1016/j.ijheatmasstransfer.2009.04.011

Nikolopoulos, N., Violidakis, I., Karampinis, E., Agraniotis, M., Bergins, C. and Panagiotis, G. (2015). Report on comparison among current industrial scale lignite drying technologies. Fuel, 155, pp. 86-114. doi: 10.1016/j.fuel.2015.03.065

Njoum, H. and Kyriacou, P. A. (2013). Investigation of finger reflectance photoplethysmography in volunteers undergoing a local sympathetic stimulation. Journal of Physics: Conference Series, 450(1), 012012. doi: 10.1088/1742-6596/450/1/012012

Njoum, H. and Kyriacou, P. A. (2017). Photoplethysmography for the Assessment of Haemorheology. Scientific Reports, 7, 1406.. doi: 10.1038/s41598-017-01636-0

Nouri, J. M., Guerrato, D., Stosic, N. and Arcoumanis, C. (2008). Axial Flow Characteristics within a Screw Compressor. HVAC&R Research, 14(2), pp. 259-274. doi: 10.1080/10789669.2008.10391007

Nouri, J. M., Marchi, A., Yan, Y. and Arcoumanis, C. (2007). Internal flow and spray characteristics of a pintle-type outward opening piezo-injector. Transactions Journal of Engines, 116(6), pp. 915-934. doi: 10.4271/2007-01-1406

Oates, A., Cabrera-Espana, F., Agrawal, A. and Reehal, H. S. (2014). Fabrication and characterisation of Si micropillar PV structures. Energy Materials, 9(4), pp. 500-504.

Omidyeganeh, M. and Piomelli, U. (2013). Large-eddy simulation of three-dimensional dunes in a steady, unidirectional flow. Part 1. Turbulence statistics. Journal of Fluid Mechanics, 721, pp. 454-483. doi: 10.1017/jfm.2013.36

Omidyeganeh, M. and Piomelli, U. (2013). Large-eddy simulation of three-dimensional dunes in a steady, unidirectional flow. Part 2. Flow structures. Journal of Fluid Mechanics, 734, pp. 509-534. doi: 10.1017/jfm.2013.499

Omidyeganeh, M. and Piomelli, U. (2011). Large-eddy simulation of two-dimensional dunes in a steady, unidirectional flow. Journal of Turbulence, 12(42), pp. 1-31. doi: 10.1080/14685248.2011.609820

Ous, T. and Arcoumanis, C. (2013). Degradation aspects of water formation and transport in Proton Exchange Membrane Fuel Cell: A review. Journal of Power Sources, 240, pp. 558-582. doi: 10.1016/j.jpowsour.2013.04.044

Ous, T. and Arcoumanis, C. (2007). Effect of compressive force on the performance of a proton exchange membrane fuel cell. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 221(9), pp. 1067-1074. doi: 10.1243/09544062JMES654

Ous, T. and Arcoumanis, C. (2008). Visualisation of water accumulation in the flow channels of PEMFC under various operating conditions. Journal of Power Sources, 187(1), pp. 182-189. doi: 10.1016/j.jpowsour.2008.10.072

Ous, T. and Arcoumanis, C. (2007). Visualisation of water droplets during the operation of PEM fuel cells. Journal of Power Sources, 173(1), pp. 137-148. doi: 10.1016/j.jpowsour.2007.04.075

Ous, T. and Arcoumanis, C. (2009). The formation of water droplets in an air-breathing PEMFC. International Journal of Hydrogen Energy, 34(8), pp. 3476-3487. doi: 10.1016/j.ijhydene.2009.02.037

Ous, T., Mujic, E. and Stosic, N. (2012). Experimental investigation on water injected twin screw compressor for fuel cell humidification. Proceedings of the Institution of Mechanical Engineers, Part C, Journal of Mechanical Engineering Science, 226(2), pp. 2925-2932. doi: 10.1177/0954406212438323

Owen, M., McNamara, A. M. ORCID: 0000-0002-3452-0800 and Panchal, J. (2018). The Risk of Unexploded Ordnance on Construction Sites in London. Environmental Geotechnics, doi: 10.1680/jenge.18.00049

Pacholak, S. and Brücker, C. (2017). Size does matter: The use of fish motion for improving human swimming simulations. Applied Mathematical Modelling, 46, doi: 10.1016/j.apm.2017.01.080

Pacholak, S., Hochstein, S., Rudert, A. and Brücker, C. (2014). Unsteady flow phenomena in human undulatory swimming: a numerical approach. Sports Biomechanics, 13(2), doi: 10.1080/14763141.2014.893609

Pal, S. K., Kyriacou, P. A., Kumaran, S., Fadheel, S., Emamdee, R., Langford, R. M. and Jones, D. P. (2005). Evaluation of oesophageal reflectance pulse oximetry in major burns patients. Burns, 31(3), pp. 337-341. doi: 10.1016/j.burns.2004.10.025

Pan, C. and Rahman, B. M. (2016). High-Sensitivity Polarization-Independent Biochemical Sensor Based on Silicon-on-Insulator Cross-Slot Waveguide. IEEE Journal of Selected Topics in Quantum Electronics, 23(2), doi: 10.1109/JSTQE.2016.2594094

Paniagua, P., Fonseca, J., Gylland, A. S. and Nordal, S. (2017). Investigation of the change in soil fabric during cone penetration in silt using 2D measurements. Acta Geotechnica, doi: 10.1007/s11440-017-0559-8

Papadopoulos, K., Gerotziafas, G. T. and Gavaises, M. ORCID: 0000-0003-0874-8534 (2017). Modelling of thrombin generation under flow in realistic left anterior descending geometries. Medical Engineering & Physics, 50, pp. 50-58. doi: 10.1016/j.medengphy.2017.10.001

Papanikolaou, V.K. and Kappos, A. J. (2009). Numerical study of confinement effectiveness in solid and hollow reinforced concrete bridge piers: Methodology. Computers & Structures, 87(21-22), pp. 1427-1439. doi: 10.1016/j.compstruc.2009.05.004

Papanikolaou, V.K., Stefanidou, S.P. and Kappos, A. J. (2013). The effect of preloading on the strength of jacketed R/C columns. Construction and Building Materials, 38, pp. 54-63. doi: 10.1016/j.conbuildmat.2012.07.100

Papkov, S.O. and Banerjee, J. R. (2019). Dynamic stiffness formulation and free vibration analysis of specially orthotropic Mindlin plates with arbitrary boundary conditions. Journal of Sound and Vibration, 458, pp. 522-543. doi: 10.1016/j.jsv.2019.06.028

Paraskeva, T. S. and Kappos, A. J. (2010). Further development of a multimodal pushover analysis procedure for seismic assessment of bridges. Earthquake Engineering and Structural Dynamics, 39(2), pp. 211-222. doi: 10.1002/eqe.947

Parulek, J., Turkay, C., Reuter, N. and Viola, I. (2013). Visual cavity analysis in molecular simulations. BMC Bioinformatics, 14(19), pp. 1-15. doi: 10.1186/1471-2105-14-S19-S4

Phillips, J. P., Belhaj, A., Langford, R. M. and Kyriacou, P. A. (2013). Effect of respiratory-induced intensity variations on finger SpO(2) measurements in volunteers. 2013 35th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), pp. 3937-3940. doi: 10.1109/EMBC.2013.6610406

Phillips, J. P., Hickey, M. and Kyriacou, P. A. (2011). Electro-optical Plethysmography for Non-invasive Estimation of Hemoglobin Concentration. 2011 Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBC, pp. 4348-4351. doi: 10.1109/IEMBS.2011.6091079

Phillips, J. P., Jones, D. P., Kyriacou, P. A., Chang, S. H., Maney, K. and Langford, R. M. (2007). Preliminary Evaluation of a Fiber Optic Cerebral Oximetry System in Patients Undergoing Neurosurgery. Anesthesia and Analgesia, 105(6), S113-S114. doi: 10.1213/01.ane.0000290771.60068.d5

Phillips, J. P. and Kyriacou, P. A. (2011). Photoplethysmographic sensors for perfusion measurements in spinal cord tissue. Journal of Physics: Conference Series, 307(1), 012016. doi: 10.1088/1742-6596/307/1/012016

Phillips, J. P., Kyriacou, P. A., George, K. and Langford, R. M. (2010). Optical measurement of blood flow changes in spinal cord injury. Journal of Physics: Conference Series, 238(1), 012060. doi: 10.1088/1742-6596/238/1/012060

Phillips, J. P., Kyriacou, P. A., Jones, D. P., Shelley, K. H. and Langford, R. M. (2008). Pulse oximetry and photoplethysmographic waveform analysis of the esophagus and bowel. Current opinion in anesthesiology, 21(6), pp. 779-783. doi: 10.1097/ACO.0b013e328317794d

Phillips, J. P., Langford, R. M., Chang, S. H., Maney, K., Kyriacou, P. A. and Jones, D. P. (2010). Cerebral Arterial Oxygen Saturation Measurements Using a Fiber-Optic Pulse Oximeter. Neurocritical Care, 13(2), pp. 278-285. doi: 10.1007/s12028-010-9349-y

Phillips, J. P., Langford, R. M., Chang, S. H., Maney, K., Kyriacou, P. A. and Jones, D. P. (2009). An oesophageal pulse oximetry system utilising a fibre-optic probe. Journal of Physics: Conference Series, 178(1), 012021. doi: 10.1088/1742-6596/178/1/012021

Phillips, J. P., Langford, R. M., Kyriacou, P. A. and Jones, D. P. (2006). Optical fibre catheter photoplethysmograph. Measurement & Control, 39(3), pp. 84-87. doi: 10.1177/002029400603900304

Phillips, J. P., Langford, R. M., Kyriacou, P. A. and Jones, D. P. (2008). Preliminary evaluation of a new fibre-optic cerebral oximetry system. Physiological Measurement, 29(12), p. 1383. doi: 10.1088/0967-3334/29/12/003

Placidi, M. and Ganapathisubramani, B. (2015). Effects of frontal and plan solidities on aerodynamic parameters and the roughness sublayer in turbulent boundary layers. Journal of Fluid Mechanics, 782, pp. 541-566. doi: 10.1017/jfm.2015.552

Ponitz, B., Sastuba, M. and Bruecker, C. (2016). 4D visualization study of a vortex ring life cycle using modal analyses. Journal of Visualization, 19(2), pp. 237-259. doi: 10.1007/s12650-015-0314-x

Ponitz, B., Schmitz, A., Fischer, D., Bleckmann, H. and Brücker, C. (2014). Diving-flight aerodynamics of a peregrine falcon (Falco peregrinus). PLoS ONE, 9(2), pp. 1-13. doi: 10.1371/journal.pone.0086506

Ponitz, B., Triep, M. and Brücker, C. (2014). Aerodynamics of the Cupped Wings during Peregrine Falcon’s Diving Flight. Open Journal of Fluid Dynamics, 4(4), doi: 10.4236/ojfd.2014.44027

Ponnusami, S. A. ORCID: 0000-0002-2143-8971, Gupta, M. and Harursampath, D. (2019). Asymptotic Modeling of Nonlinear Bending and Buckling Behavior of Carbon Nanotubes. AIAA Journal, doi: 10.2514/1.j057564

Ponnusami, S. A., Turteltaub, S. and van der Zwaag, S. (2015). Cohesive-zone modelling of crack nucleation and propagation in particulate composites. Engineering Fracture Mechanics, 149, pp. 170-190. doi: 10.1016/j.engfracmech.2015.09.050

Powell, S., Kyriacou, P. A., Jones, D. P. and Langford, R. M. (2001). Investigation into the use of a new oesophageal pulse oximeter in cardiothoracic surgery patients. British Journal of Anaesthesia, 87(4), 660P-660P. doi: 10.1093/bja/87.4.654

Preziosi, M-C. and Micic, T. (2012). Embankment dam probabilistic assessment for climate scenarios. Proceedings of the ICE - Geotechnical Engineering, 165(3), pp. 179-193. doi: 10.1680/geng.11.00038

Preziosi, M.C. and Micic, T. (2014). An adaptive methodology for risk classification of small homogeneous earthfill embankment dams integrating climate change projections. Civil Engineering and Environmental Systems, 31(2), pp. 111-124. doi: 10.1080/10286608.2014.912639

Qassem, M. and Kyriacou, P. A. (2014). Effectiveness of the DreamSkin (R) garment on relieving symptoms of Eczema/Dermatitis using electrical and spectroscopic methods: a case study. 2014 36th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), pp. 3723-3726. doi: 10.1109/EMBC.2014.6944432

Qassem, M. and Kyriacou, P. A. (2012). In vitro spectrophotometric near infrared measurements of skin absorption and dehydration. Conference proceedings : ... Annual International Conference of the IEEE Engineering in Medicine and Biology Society. IEEE Engineering in Medicine and Biology Society., 2012, pp. 6044-6047. doi: 10.1109/EMBC.2012.6347372

Qassem, M. and Kyriacou, P. A. (2014). Investigating skin barrier function utilizing reflectance NIR Spectroscopy. 2014 36th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), pp. 3735-3738. doi: 10.1109/EMBC.2014.6944435

Qassem, M. and Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2019). Review of Modern Techniques for the Assessment of Skin Hydration. Cosmetics, 6(1), 19.. doi: 10.3390/cosmetics6010019

Qassem, M. and Kyriacou, P. A. (2014). Use of reflectance near-infrared spectroscopy to investigate the effects of daily moisturizer application on skin optical response and barrier function. Journal of Biomedical Optics, 19(8), 087007. doi: 10.1117/1.JBO.19.8.087007

Qian, K., Liang, S-L., Fu, F. ORCID: 0000-0002-9176-8159 and Fang, Q. (2019). Progressive Collapse Resistance of Precast Concrete Beam-Column Sub-assemblages with High-Performance Dry Connections. Engineering Structures, doi: 10.1016/j.engstruct.2019.109552

Qian, K., Zhang, X-D., Fu, F. ORCID: 0000-0002-9176-8159 and Li, B. (2019). Progressive Collapse Resisting Mechanisms of Planar Prestressed Concrete Frame. ACI Structural Journal, 116(4), pp. 77-90. doi: 10.14359/51715567

Qian, W., Rosic, B., Zhang, Q. and Khanal, B. (2016). Influence of fluid temperature gradient on the flow within the shaft gap of a PLR pump. Heat and Mass Transfer/Waerme- und Stoffuebertragung, 52(3), pp. 469-481. doi: 10.1007/s00231-015-1570-y

Qu, H., Huo, J., Xu, C. and Fu, F. ORCID: 0000-0002-9176-8159 (2014). Numerical studies on dynamic behavior of tubular T-joint subjected to impact loading. International Journal of Inpact Engineering, 67, pp. 12-26. doi: 10.1016/j.ijimpeng.2014.01.002

Rahman, B. M., Markides, C., Uthman, M., Quadir, A., Kejalakshmy, N. and Themistos, C. (2014). Characterization of low-loss waveguides and devices for terahertz radiation. Optical Engineering (OE), 53(3), 031210. doi: 10.1117/1.OE.53.3.031210

Rahman, E., Powner, M. B. ORCID: 0000-0003-4913-1004, Kyriacou, P. A. ORCID: 0000-0002-2868-485X and Triantis, I. ORCID: 0000-0002-8900-781X (2018). Assessment of the Complex Refractive Indices of Xenopus Laevis Sciatic Nerve for the Optimisation of Optical (NIR) Neurostimulation. IEEE Transactions on Neural Systems and Rehabilitation Engineering, doi: 10.1109/TNSRE.2018.2878107

Rahulamathavan, Y., C.-W. Phan, R., Veluru, S., Cumanan, K and Rajarajan, M. (2013). Privacy-Preserving Multi-Class Support Vector Machine for Outsourcing the Data Classification in Cloud. IEEE Transactions on Dependable and Secure Computing, 11(5), pp. 467-479. doi: 10.1109/TDSC.2013.51

Rakocevic, V. (2014). Clustering for networks of moving objects. Lecture Notes in Computer Science, 8611, pp. 70-87. doi: 10.1007/978-3-319-10834-6_5

Rane, S., Kovacevic, A., Stosic, N. and Kethidi, M. (2013). Grid deformation strategies for CFD analysis of screw compressors. International Journal of Refrigeration, 36(7), pp. 1883-1893. doi: 10.1016/j.ijrefrig.2013.04.008

Ransley, E., Yan, S. ORCID: 0000-0001-8968-6616, Brown, S. A., Mai, T., Graham, D., Ma, Q., Musiedlak, P-H., Engsig-Karup, A. P., Eskilsson, C., Li, Q., Wang, J., Xie, Z., Venkatachalam, S., Stoesser, T., Zhuang, Y., Li, Q., Wan, D., Chen, G., Chen, H., Qian, L., Ma, Z., Mingham, C., Causon, D., Gatin, I., Jasak, H., Vukcevic, V., Downie, S., Higuera, P., Buldakov, E., Stagonas, D., Chen, Q., Zang, J. and Greaves, D. (2019). A Blind Comparative Study of Focused Wave Interactions with a Fixed FPSO-like Structure (CCP-WSI Blind Test Series 1). International Journal of Offshore and Polar Engineering, 29(2), pp. 113-127. doi: 10.17736/ijope.2019.jc748

Raoufi, N., Surre, F., Rajarajan, M., Sun, T. and Grattan, K. T. V. (2013). Fibre Optic pH Sensor Using Optimized Layer-by-Layer Coating Approach. IEEE Sensors Journal, 14(1), pp. 47-54. doi: 10.1109/JSEN.2013.2280283

Raoufi, N., Surre, F., Rajarajan, M., Sun, T. and Grattan, K. T. V. (2014). Optical sensor for pH monitoring using a layer-by-layer deposition technique emphasizing enhanced stability and re-usability. Sensors and Actuators B Chemical, 195, pp. 692-701. doi: 10.1016/j.snb.2014.01.080

Raoufi, N., Surre, F., Sun, T., Rajarajan, M. and Grattan, K. T. V. (2012). Wavelength dependent pH optical sensor using the layer-by-layer technique. Sensors and Actuators B Chemical, 169, pp. 374-381. doi: 10.1016/j.snb.2012.05.024

Read, M. G., Smith, I. and Stosic, N. (2014). Effect of air temperature variation on the performance of wet vapour organic rankine cycle systems. Geothermal Resources Council Transactions, 38, pp. 705-712.

Read, M. G., Smith, I. K. and Stosic, N. (2015). Optimisation of two-stage screw expanders for waste heat recovery applications. IOP Conference Series: Materials Science and Engineering, 90(1), 012058. doi: 10.1088/1757-899X/90/1/012058

Read, M. G., Stosic, N. and Smith, I. K. (2014). Optimization of Screw Expanders for Power Recovery From Low-Grade Heat Sources. Energy Technology & Policy, 1(1), pp. 131-142. doi: 10.1080/23317000.2014.969454

Reyes-Aldasoro, C. C. (2009). Retrospective shading correction algorithm based on signal envelope estimation. Electronics Letters, 45(9), pp. 454-456. doi: 10.1049/el.2009.0320

Reyes-Aldasoro, C. C. and Bhalerao, A. (2003). Volumetric texture description and discriminant feature selection for MRI. Information Processing in Medical Imaging, 2732, pp. 282-293. doi: 10.1007/978-3-540-45087-0_24

Reyes-Aldasoro, C. C., Björndahl, M. A., Akerman, S., Ibrahim, J., Griffiths, M. K. and Tozer, G. M. (2012). Online chromatic and scale-space microvessel-tracing analysis for transmitted light optical images. Microvascular Research, 84(3), pp. 330-339. doi: 10.1016/j.mvr.2012.09.002

Reyes-Aldasoro, C. C., Björndahl, M. A., Kanthou, C. and Tozer, G. M. (2017). Topological analysis of the vasculature of angiopoietin-expressing tumours through scale-space tracing. Communications in Computer and Information Science, 723, pp. 285-296. doi: 10.1007/978-3-319-60964-5_25

Reyes-Aldasoro, C. C., Williams, L. J., Akerman, S., Kanthou, C. and Tozer, G. M. (2011). An automatic algorithm for the segmentation and morphological analysis of microvessels in immunostained histological tumour sections. Journal Of Microscopy, 242(3), pp. 262-278. doi: 10.1111/j.1365-2818.2010.03464.x

Rijas, A. S., Sriram, V. and Yan, S. ORCID: 0000-0001-8968-6616 (2019). Variable Spaced Particle in Meshfree Method to handle wave‐floating body interactions. International Journal for Numerical Methods in Fluids, doi: 10.1002/fld.4751

Riley, P. H. ORCID: 0000-0002-1580-7689 (2015). The Myth of the High-Efficiency External-Combustion Stirling Engine. Engineering, 7(12), pp. 789-795. doi: 10.4236/eng.2015.712068.

Rockenbach, A., Mikulich, V., Bruecker, C. and Schnakenberg, U. (2015). Fluid transport via pneumatically actuated waves on a ciliated wall. Journal of Micromechanics and Microengineering, 25(12), 125009.. doi: 10.1088/0960-1317/25/12/125009

Rose, A.V., Taylor, R.N. and El Naggar, M. H. (2013). Numerical modelling of perimeter pile groups in clay. Canadian Geotechnical Journal, 50(3), pp. 250-258. doi: 10.1139/cgj-2012-0194

Rotter, J. M., Goodey, R.J. ORCID: 0000-0002-9166-8393 and Brown, C. J. (2019). Towards design rules for rectangular silo filling pressures. Engineering Structures, 198, 109547.. doi: 10.1016/j.engstruct.2019.109547

Roy, R. ORCID: 0000-0001-5491-7437 (2017). Foreword. Procedia CIRP, 59, p. 1. doi: 10.1016/j.procir.2017.02.010

Roy, R. ORCID: 0000-0001-5491-7437 (2015). Foreword. Procedia CIRP, 38, pp. 1-2. doi: 10.1016/j.procir.2015.08.099

Roy, R. ORCID: 0000-0001-5491-7437 (2014). Foreword. Procedia CIRP, 22, pp. 1-2. doi: 10.1016/j.procir.2014.08.012

Roy, R. ORCID: 0000-0001-5491-7437, Stark, R., Tracht, K., Takata, S. and Mori, M. (2016). Continuous maintenance and the future - Foundations and technological challenges. CIRP Annals, 65(2), pp. 667-688. doi: 10.1016/j.cirp.2016.06.006

Ruiz, R., Taflanidis, A. A., Giaralis, A. ORCID: 0000-0002-2952-1171 and Lopez-Garcia, D. (2018). Risk-informed optimization of the tuned mass-damper-inerter (TMDI) for the seismic protection of multi-storey building structures. Engineering Structures, 177, pp. 836-850. doi: 10.1016/j.engstruct.2018.08.074

Rybynok, V. and Kyriacou, P. A. (2013). Theory of Dynamic Pulsatile Spectroscopy for photoplethysmographic signals analysis. 35th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), 2013, pp. 2652-2655. doi: 10.1109/EMBC.2013.6610085

Rybynok, V., Kyriacou, P. A., Pal, S. K. and White, D. C. (2004). Psychomotor testing to detect changes in cerebral function. British Journal of Anaesthesia, 93(4), 604P-618P. doi: 10.1093/bja/aeh495

Rybynok, V.O. and Kyriacou, P. A. (2007). A systematic approach for the accurate non-invasive estimation of blood glucose utilizing a novel light-tissue interaction adaptive modelling scheme. Journal of Physics: Conference Series, 85(012033), doi: 10.1088/1742-6596/85/1/012033

Sadowski, A.J., Camara, A., Malaga-Chuquitaype, C. and Dai, K. (2017). Seismic analysis of a tall metal wind turbine support tower with realistic geometric imperfections. Earthquake Engineering and Structural Dynamics, 46(2), pp. 201-219. doi: 10.1002/eqe.2785

Saha, C. R., Riley, P. H. ORCID: 0000-0002-1580-7689, Jinks, R. and Johnson, C. M. (2018). Suspension Design, Modeling, and Testing of a Thermo-Acoustic-Driven Linear Alternator. Journal Of Vibration And Acoustics, 140(2), 021014. doi: 10.1115/1.4038270

Salonikios, T. N., Sextos, A. and Kappos, A. J. (2012). Tests on composite slabs and evaluation of relevant Eurocode 4 provisions. Steel and composite structures, 13(6), pp. 571-586. doi: 10.12989/scs.2012.13.6.571

Sanchez, T., Dennis, R. and Pullen, K. R. (2013). Cooking and lighting habits in rural Nepal and Uganda. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 227(7), pp. 727-739. doi: 10.1177/0957650913498872

Santhi, K., Shafqat, K., Kyriacou, P. A. and Pal, S. K. (2007). Investigation of heart rate variability in patients undergoing hand surgery under axillary plexus block. British Journal of Anaesthesia, 98(2), 282P-283P. doi: 10.1093/bja/ael319

Savvidis, R., Pachakis, D. and Giaralis, A. ORCID: 0000-0002-2952-1171 (2018). Optimal seismic upgrade timing in seaports with increasing throughput demand via real options. ASCE-ASME Journal of Risk and Uncertainty in Engineering systems, Part A: Civil Engineering, 5(1), doi: 10.1061/AJRUA6.0001003

Sayma, A. I. (2011). Towards virtual testing of compression systems in gas turbine engines. NAFEMS International Journal of CFD Case Studies, 9, pp. 29-42.

Schmitz, A., Ondreka, N., Poleschinski, J., Fischer, D., Schmitz, H., Klein, A., Bleckmann, H. and Bruecker, C. ORCID: 0000-0001-5834-3020 (2018). The peregrine falcon's rapid dive: on the adaptedness of the arm skeleton and shoulder girdle. Journal of Comparative Physiology A: Neuroethology, Sensory, Neural, and Behavioral Physiology, 204(8), pp. 747-759. doi: 10.1007/s00359-018-1276-y

Schmitz, A., Ponitz, B., Brücker, C., Schmitz, H., Herweg, J. and Bleckmann, H. (2015). Morphological properties of the last primaries, the tail feathers, and the alulae of Accipiter nisus, Columba livia, Falco peregrinus, and Falco tinnunculus. Journal of Morphology, 276(1), pp. 33-46. doi: 10.1002/jmor.20317

Schwarze, R., Mattheus, W., Klostermann, J. and Brücker, C. (2011). Starting jet flows in a three-dimensional channel with larynx-shaped constriction. Computers and Fluids, 48(1), pp. 68-83. doi: 10.1016/j.compfluid.2011.03.016

Scott, R., Vidakovic, M., Chikermane, S., McKinley, B. ORCID: 0000-0001-6641-5100, Sun, T. ORCID: 0000-0003-3861-8933, Banerji, P. and Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2019). Encapsulation of Fiber Optic Sensors in 3-D Printed Packages for use in Civil Engineering Applications: A Preliminary Study. Sensors, 19(7), 1689.. doi: 10.3390/s19071689

Seeley, A., Dissado, L. A. and Fothergill, J. (2001). Electric field requirements for charge packet generation and movement in XLPE. IEEE Transactions on Dielectrics and Electrical Insulation, 8(6), pp. 232-235. doi: 10.1109/ICSD.2001.955603

Seeley, A., Dissado, L. A., Fothergill, J., Teyssedre, G., Laurent, C., Montanari, G. C. and Palmieri, F. (2001). The relationship between charge distribution, charge packet formation and electroluminescence in XLPE under DC. IEEE Proceedings of the 2001 IEEE 7th International Conference on Solid Dielectrics, pp. 97-100. doi: 10.1109/ICSD.2001.955523

Sekimoto, A., Kawahara, G., Sekiyama, K., Uhlmann, M. and Pinelli, A. (2011). Turbulence-and buoyancy-driven secondary flow in a horizontal square duct heated from below. Physics of fluids, 23, 075103. doi: 10.1063/1.3593462

Seward, L. J., Stallebrass, S. E. and Skipper, J. (2013). Remoulding of the Mercia Mudstone Group around CFA pile shafts. Quarterly Journal of Engineering Geology and Hydrogeology, 46(1), pp. 41-51. doi: 10.1144/qjegh2011-053

Shafique, M. and Kyriacou, P. A. (2012). Photoplethysmographic signals and blood oxygen saturation values during artificial hypothermia in healthy volunteers. Physiological Measurement, 33(12), pp. 2065-2078. doi: 10.1088/0967-3334/33/12/2065

Shafique, M., Phillips, J. P. and Kyriacou, P. A. (2009). A novel non-invasive trans-reflectance photoplethysmographic probe for use in cases of low peripheral blood perfusion. Conference proceedings : ... Annual International Conference of the IEEE Engineering in Medicine and Biology Society. IEEE Engineering in Medicine and Biology Society. Conference, doi: 10.1109/IEMBS.2009.5334165

Shafqat, K., Jones, D. P., Langford, R. M. and Kyriacou, P. A. (2006). Filtering techniques for the removal of ventilator artefact in oesophageal pulse oximetry. Medical & Biological Engineering & Computing, 44(8), pp. 729-737. doi: 10.1007/s11517-006-0089-2

Shafqat, K., Pal, S., Kumari, S. and Kyriacou, P. A. (2009). Time-Frequency analysis of HRV data from locally anesthetized patients. Annual International Conference of the IEEE Engineering in Medicine and Biology Society, 2009. EMBC 2009, pp. 1824-1827. doi: 10.1109/IEMBS.2009.5332604

Shen, X., Camara, A. and Ye, A. J. (2015). Effects of seismic devices on transverse responses of piers in the Sutong Bridge. Earthquake Engineering and Engineering Vibration, 14(4), pp. 611-623. doi: 10.1007/s11803-015-0049-7

Siesakul, B. T., Gkoktsi, K. and Giaralis, A. (2015). Compressive power spectrum sensing for vibration-based output-only system identification of structural systems in the presence of noise. Compressive Sensing IV, 9484, 94840K. doi: 10.1117/12.2177162

Silvers, L. J., Favier, B. and Proctor, M. R. E. (2014). Inverse cascade and symmetry breaking in rapidly-rotating Boussinesq convection. Physics of Fluids, 26, 096605. doi: 10.1063/1.489513

Sirikham, A., Zhao, Y., Nezhad, H. Y., Du, W. and Roy, R. ORCID: 0000-0001-5491-7437 (2019). Estimation of Damage Thickness in Fiber-Reinforced Composites using Pulsed Thermography. IEEE Transactions on Industrial Informatics, 15(1), pp. 445-453. doi: 10.1109/TII.2018.2878758

Skrekas, P., Sextos, A. and Giaralis, A. (2014). Influence of bi-directional seismic pounding on the inelastic demand distribution of three adjacent multi-storey R/C buildings. Earthquakes and Structures, 6(1), pp. 71-87. doi: 10.12989/eas.2014.6.1.071

Skupsch, C. and Brücker, C. (2013). Multiple-plane particle image velocimetry using a light-field camera. Optics Express, 21(2), pp. 1726-1740. doi: 10.1364/OE.21.001726

Skupsch, C., Klotz, T., Chaves, H. and Brücker, C. (2012). Channelling optics for high quality imaging of sensory hair. Review of Scientific Instruments, 83(045001), doi: 10.1063/1.3697997

Slabaugh, G. G., Whited, B., Rossignac, J., Fang, T. and Unal, G. B. (2010). 3D ball skinning using PDEs for generation of smooth tubular surfaces. Computer-Aided Design, 42(1), pp. 18-26. doi: 10.1016/j.cad.2009.03.004

Smith, I. K., Stosic, N., Mujic, E. and Kovacevic, A. (2011). Steam as the working fluid for power recovery from exhaust gases by means of screw expanders. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 225(2), pp. 117-125. doi: 10.1177/2041300910393429

Somani, G., Gaur, M. S., Sanghi, D., Conti, M. and Rajarajan, M. (2018). Scale Inside-Out: Rapid Mitigation of Cloud DDoS Attacks. IEEE Transactions on Dependable and Secure Computing, 15(6), doi: 10.1109/TDSC.2017.2763160

Soudi, S. and Rahman, B. M. (2016). Design of a Compact Polarization Splitter by Using Identical Coupled Silicon Nanowires. Journal of Lightwave Technology, 34(17), pp. 4169-4178. doi: 10.1109/JLT.2016.2577341

Spanos, P. D. and Giaralis, A. (2013). Third-order statistical linearization-based approach to derive equivalent linear properties of bilinear hysteretic systems for seismic response spectrum analysis. Structural Safety, 44, pp. 59-69. doi: 10.1016/j.strusafe.2012.12.001

Sriram, V. and Ma, Q. (2012). Improved MLPG_R method for simulating 2D interaction between violent waves and elastic structures. Journal of Computational Physics, 231(22), pp. 7650-7670. doi: 10.1016/j.jcp.2012.07.003

Sriram, V., Ma, Q. and Schlurmann, T. (2014). A hybrid method for modelling two dimensional non-breaking and breaking waves. Journal of Computational Physics, 272, pp. 429-454. doi: 10.1016/j.jcp.2014.04.030

Stankovic, S. B. and Kyriacou, P. A. (2011). Comparison of thermistor linearization techniques for accurate temperature measurement in phase change materials. Journal of Physics: Conference Series, 307(1), 012009. doi: 10.1088/1742-6596/307/1/012009

Stankovic, S. B. and Kyriacou, P. A. (2013). Improved measurement technique for the characterization of organic and inorganic phase change materials using the T-history method. Applied Energy, 109, pp. 433-440. doi: 10.1016/j.apenergy.2013.01.079

Stanković, S. B. and Kyriacou, P. A. (2012). The effects of thermistor linearization techniques on the T-history characterization of phase change materials. Applied Thermal Engineering, 44(Nov), pp. 78-84. doi: 10.1016/j.applthermaleng.2012.03.032

Stefanidou, S.P. and Kappos, A. J. (2017). Methodology for the development of bridge-specific fragility curves. Earthquake Engineering and Structural Dynamics, 46(1), pp. 73-93. doi: 10.1002/eqe.2774

Stosic, N., Kovacevic, A. ORCID: 0000-0002-8732-2242 and Smith, I. K. ORCID: 0000-0003-1524-9880 (2003). Three Dimensional Numerical Analysis of Screw Compressor Performance. Journal of Computer Methods in Applied Mechanics and Engineering, 3(2), pp. 259-284. doi: 10.3233/JCM-2003-3206

Stosic, N., Smith, I., Kovacevic, A. and Mujic, E. (2011). Review of Mathematical Models in Performance Calculation of Screw Compressors. International Journal of Fluid Machinery and Systems, 4(2), pp. 271-288. doi: 10.5293/IJFMS.2011.4.2.271

Stosic, N., Smith, I. K., Chukanova, E. and Kovacevic, A. (2013). Experimental Investigation and Numerical Modelling of Dynamic Behaviour of Screw Compressor Plant. Universal Journal of Engineering Science, 1, pp. 68-79. doi: 10.13189/ujes.2013.010302

Stosic, N., Smith, I. K. ORCID: 0000-0003-1524-9880 and Kovacevic, A. ORCID: 0000-0002-8732-2242 (2012). Numerical and experimental research in heat transfer to screw compressor rotors. Frontiers in Heat and Mass Transfer, 3(2), 023003.. doi: 10.5098/hmt.v3.2.3003

Stosic, N., Smith, I. K. ORCID: 0000-0003-1524-9880 and Kovacevic, A. ORCID: 0000-0002-8732-2242 (2003). Optimisation of screw compressors. Applied Thermal Engineering, 23(10), pp. 1177-1195. doi: 10.1016/S1359-4311(03)00059-0

Stosic, N., Smith, I. K. ORCID: 0000-0003-1524-9880 and Kovacevic, A. ORCID: 0000-0002-8732-2242 (2003). Rotor interference as a criterion for screw compressor design. Journal of Engineering Design, 14(2), pp. 209-220. doi: 10.1080/0954482031000091518

Strotos, G., Malgarinos, I., Nikolopoulos, N., Gavaises, M. ORCID: 0000-0003-0874-8534, Nikas, K-S. and Moustris, K. (2018). Determination of the aerodynamic droplet breakup boundaries based on a total force approach. International Journal of Heat and Fluid Flow, 69, pp. 164-173. doi: 10.1016/j.ijheatfluidflow.2018.01.001

Sun, Z. (2015). Micro Vortex Generators for Boundary Layer Control: Principles and Applications. International Journal of Flow Control, 7(1-2), pp. 67-86. doi: 10.1260/1756-8250.7.1-2.67

Sun, Z. and Bruecker, C. (2017). Investigation of the Vortex Ring Transition using Scanning Tomo-PIV. Experiments in Fluids, 58, 36.. doi: 10.1007/s00348-017-2322-1

Sun, Z., Scarano, F., van Oudheusden, B. W., Schrijer, F. F. J., Yan, Y. and Liu, C. (2014). Numerical and experimental investigations of the supersonic microramp wake. AIAA Journal, 52(7), pp. 1518-1527. doi: 10.2514/1.J052649

Sun, Z., Schrijer, F. F. J., Scarano, F. and van Oudheusden, B. W. (2014). Decay of the supersonic turbulent wakes from micro-ramps. Physics of Fluids, 26(2), 025115. doi: 10.1063/1.4866012

Sun, Z., Schrijer, F. F. J., Scarano, F. and van Oudheusden, B. W. (2012). The three-dimensional flow organization past a micro-ramp in a supersonic boundary layer. Physics of Fluids, 24(5), 055105. doi: 10.1063/1.4711372

Surre, F., Sun, T. and Grattan, K. T. V. (2013). Fiber Optic Strain Monitoring for Long-Term Evaluation of a Concrete Footbridge Under Extended Test Conditions. IEEE Sensors Journal, 13(3), pp. 1036-1043. doi: 10.1109/JSEN.2012.2234736

Taflanidis, A., Giaralis, A. ORCID: 0000-0002-2952-1171 and Patsialis, D. (2019). Multi-objective optimal design of inerter-based vibration absorbers for earthquake protection of multi-storey building structures. Journal of The Franklin Institute, doi: 10.1016/j.jfranklin.2019.02.022

Temami, O., Ayoub, A. ORCID: 0000-0002-2670-9662, Hamadi, D. and Bennoui, I. (2018). Effect of Boundary Conditions on the Behavior of Stiffened and Un-Stiffened Cylindrical Shells. International Journal of Steel Structures, doi: 10.1007/s13296-018-0173-0

Teyssedre, G., Laurent, C., Montanari, G. C., Palmieri, F., Seeley, A., Dissado, L. A. and Fothergill, J. (2001). Charge distribution and electroluminescence in cross-linked polyethylene under dc field. Journal of Physics D: Applied Physics, 34(18), pp. 2830-2844. doi: 10.1088/0022-3727/34/18/318

Theophilou, A-A. I., Chryssanthopoulos, M. K. and Kappos, A. J. (2017). A vector-valued ground motion intensity measure incorporating normalized spectral area. Bulletin of Earthquake Engineering, 15(1), pp. 249-270. doi: 10.1007/s10518-016-9959-7

Thermou, G. E., Papanikolaou, V.K. and Kappos, A. J. (2014). Flexural behaviour of reinforced concrete jacketed columns under reversed cyclic loading. Engineering Structures, 76, pp. 270-282. doi: 10.1016/j.engstruct.2014.07.013

Tinsley, L., Chalk, C., Nicholls, J., Mehnen, J. and Roy, R. ORCID: 0000-0001-5491-7437 (2017). A study of pulsed thermography for life assessment of thin EB-PVD TBCs undergoing oxidation ageing. NDT & E International, 92, pp. 67-74. doi: 10.1016/j.ndteint.2017.08.001

Tomas-Rodriguez, M. ORCID: 0000-0001-9630-9579 and Santos, M. (2019). Modelling and control of floating offshore wind turbines. REVISTA IBEROAMERICANA DE AUTOMATICA E INFORMATICA INDUSTRIAL, 16(4), doi: 10.4995/riai.2019.11648

Tracht, K., Roy, R. ORCID: 0000-0001-5491-7437 and Tomiyama, T. (2018). Foreword. Procedia CIRP, 22, p. 1. doi: 10.1016/j.promfg.2018.01.001

Triep, M., Brücker, C., Kerkhoffs, W., Schumacher, O. and Marseille, O. (2008). Investigation of the washout effect in a magnetically driven axial blood pump. Artificial Organs, 32(10), pp. 778-784. doi: 10.1111/j.1525-1594.2008.00630.x

Triep, M., Hess, D., Chaves, H., Brücker, C., Balmert, A., Westhoff, G. and Bleckmann, H. (2013). 3D flow in the venom channel of a spitting cobra: do the ridges in the fangs act as fluid guide vanes?. PLoS ONE, 8(5), pp. 1-11. doi: 10.1371/journal.pone.0061548

Trozzi, V., Kaparias, I., Bell, M. G. H. and Gentile, G. (2013). A dynamic route choice model for public transport networks with boarding queues. Transportation Planning and Technology, 36(1), pp. 44-61. doi: 10.1080/03081060.2012.745720

Tsavdaridis, K. D. and D'Mello, C. (2012). Optimisation of Novel Elliptically-Based Web Opening Shapes of Perforated Steel Beams. Journal of Constructional Steel Research, 76, pp. 39-53.

Tsavdaridis, K. D. and D'Mello, C. (2011). Web buckling study of the behaviour and strength of perforated steel beams with different novel web opening shapes. Journal of Constructional Steel Research, 67(10), pp. 1605-1620. doi: 10.1016/j.jcsr.2011.04.004

Tsavdaridis, K. D., D'Mello, C. and Huo, B. Y. (2013). Experimental and computational study of the vertical shear behaviour of partially encased perforated steel beams. Engineering Structures, 56, pp. 805-822. doi: 10.1016/j.engstruct.2013.04.025

Tung, H. C., Tsang, K. F., Lam, K. L., Tung, H. Y., Li, B. Y., Yeung, L. F., Ko, K. T., Lau, W. H. and Rakocevic, V. (2014). A mobility enabled inpatient monitoring system using a ZigBee medical sensor network. Sensors, 14(2), pp. 2397-2416. doi: 10.3390/s140202397

Ueberall, C., Koehnen, C., Rakocevic, V., Jaeger, R., Hoy, E. and Rajarajan, M. (2013). Recommendations in a heterogeneous service environment. Multimedia Tools and Applications, 62(3), pp. 785-820. doi: 10.1007/s11042-011-0874-2

Uthman, M., Rahman, B. M., Kejalakshmy, N., Agrawal, A. and Grattan, K. T. V. (2012). Design and Characterization of Low-Loss Porous-Core Photonic Crystal Fiber. IEEE Photonics Journal, 4(6), pp. 2315-2325. doi: 10.1109/JPHOT.2012.2231939

Uus, A., Liatsis, P., Slabaugh, G. G., Anagnostis, A., Roberts, S. and Twist, S. (2016). Trend Deviation Analysis for Automated Detection of Defects in GPR Data for Road Condition Surveys. Proceedings of the 23rd International Conference on Systems, Signals and Image Processing (IWSSIP 2016), doi: 10.1109/IWSSIP.2016.7502765

Viphavakit, C., Atthi, N., Boonruang, S., Themistos, C., Mohammed, W. S., Kalli, K., Rahman, B. M. and Komodromos, M. (2014). Characterization of polymer nanowires fabricated using the nanoimprint method. Proceedings of SPIE, 9126, doi: 10.1117/12.2052276

Viphavakit, C., Themistos, C., Komodromos, M., Kalli, K., Quadir, A. and Rahman, B. M. (2013). Dispersion characteristics of plasmonic waveguides for THz waves. Proceedings of SPIE, 8775, doi: 10.1117/12.2021785

Virdi, K. and Azzi, W. (2010). Behaviour of parallel girders stabilised with u-frames. Journal of Civil Engineering and Management, 16(2), pp. 197-202. doi: 10.3846/jcem.2010.21

Vogiatzaki, K., Cleary, M. J., Kronenburg, A. and Kent, J. H. (2009). Modeling of scalar mixing in turbulent jet flames by multiple mapping conditioning. Physics of Fluids, 21(2), 025105. doi: 10.1063/1.3081553

Vogiatzaki, K., Kronenburg, A., Cleary, M. J. and Kent, J. H. (2009). Multiple mapping conditioning of turbulent jet diffusion flames. Proceedings of the Combustion Institute, 32(2), pp. 1679-1685. doi: 10.1016/j.proci.2008.06.164

Vogiatzaki, K., Kronenburg, A., Navarro-Martinez, S. and Jones, W. P. (2011). Stochastic multiple mapping conditioning for a piloted, turbulent jet diffusion flame. Proceedings of the Combustion Institute, 33(1), pp. 1523-1531. doi: 10.1016/j.proci.2010.06.126

Vogiatzaki, K., Navarro-Martinez, S., De, S. and Kronenburg, A. (2015). Mixing modelling framework based on Multiple Mapping Conditioning for the prediction of turbulent flame extinction. Flow, Turbulence and Combustion, 95(2), pp. 501-517. doi: 10.1007/s10494-015-9626-0

Wang, J. and Ma, Q. (2015). Numerical techniques on improving computational efficiency of spectral boundary integral method. International Journal for Numerical Methods in Engineering, 102(10), pp. 1638-1669. doi: 10.1002/nme.4857

Wang, J., Ma, Q. ORCID: 0000-0001-5579-6454 and Yan, S. ORCID: 0000-0001-8968-6616 (2018). A fully nonlinear numerical method for modeling wave-current interactions. Journal of Computational Physics, 369, pp. 173-190. doi: 10.1016/j.jcp.2018.04.057

Wang, J., Yan, S. ORCID: 0000-0001-8968-6616 and Ma, Q. ORCID: 0000-0001-5579-6454 (2018). Deterministic numerical modelling of three-dimensional rogue waves on large scale with presence of wind. Procedia IUTAM, 26, pp. 214-226. doi: 10.1016/j.piutam.2018.03.021

Wang, Q. and Grattan, K. T. V. (2017). Suppression of subsidiary fringes in white light interferometry utilising two-wavelength light source. Optics Communications, 403, pp. 121-126. doi: 10.1016/j.optcom.2017.07.029

Wang, X., Yan, Y., Sun, Z. and Liu, C. (2014). The Vortical Structures in the Rear Separation and Wake Produced by a Supersonic Micro-Ramp. Flow, Turbulence and Combustion, 93(1), pp. 25-36. doi: 10.1007/s10494-014-9531-y

White, M. ORCID: 0000-0002-7744-1993, Oyewunmi, O. A., Haslam, A. J. and Markides, C. N. (2017). Industrial waste-heat recovery through integrated computer-aided working-fluid and ORC system optimisation using SAFT-Γ Mie. Energy Conversion and Management, 150, pp. 851-869. doi: 10.1016/j.enconman.2017.03.048

White, M. ORCID: 0000-0002-7744-1993 and Sayma, A. I. (2015). The Application of Similitude Theory for the Performance Prediction of Radial Turbines Within Small-Scale Low-Temperature Organic Rankine Cycles. Journal of Engineering for Gas Turbines and Power, 137(12), e122605. doi: 10.1115/1.4030836

White, M. ORCID: 0000-0002-7744-1993 and Sayma, A. I. (2016). Improving the economy-of-scale of small organic rankine cycle systems through appropriate working fluid selection. Applied Energy, 183, pp. 1227-1239. doi: 10.1016/j.apenergy.2016.09.055

White, M. ORCID: 0000-0002-7744-1993 and Sayma, A. I. (2015). The impact of component performance on the overall cycle performance of small-scale low temperature organic Rankine cycles. IOP Conference Series: Materials Science and Engineering, 90(1), e012063. doi: 10.1088/1757-899X/90/1/012063

Wilson, D.T., Hawe, G.I., Coates, G. and Crouch, R.S. (2013). A multi-objective combinatorial model of casualty processing in major incident response. European Journal of Operational Research, 230(3), pp. 643-655. doi: 10.1016/j.ejor.2013.04.040

Woods, V. M., Triantis, I. and Toumazou, C. (2011). Offset prediction for charge-balanced stimulus waveforms. Journal of Neural Engineering new, 8(4), .046032. doi: 10.1088/1741-2560/8/4/046032

Wren, S., Nguyen, T.H., Gascoine, P., Lacey, D., Sun, T. and Grattan, K. T. V. (2013). Preparation of a novel drug sensor using a molecular imprinted polymer approach. Proceedings of SPIE - The International Society for Optical Engineering, 8794, doi: 10.1117/12.2025839

Wren, S., Piletsky, S, Karim, K., Gascoine, P., Lacey, R., Sun, T. and Grattan, K. T. V. (2014). Design and synthesis of a fluorescent molecular imprinted polymer for use in an optical fibre-based cocaine sensor. Proceedings of SPIE - The International Society for Optical Engineering, 9157, 91574W. doi: 10.1117/12.2059278

Wu, F., Qian, J., Wu, W., Ye, Y., Sun, Z., Xu, B., Yang, X., Xu, Y., Zhang, J. and Chen, R. (2017). Boron-doped microporous nano carbon as cathode material for high-performance Li-S batteries. Nano Research, 10(2), pp. 426-436. doi: 10.1007/s12274-016-1303-7

Xu, H., Mughal, S. M., Gowree, E. R., Atkin, C. J. and Sherwin, S. J. (2017). Destabilisation and modification of Tollmien-Schlichting disturbances by a three-dimensional surface indentation. Journal of Fluid Mechanics, 819, pp. 592-620. doi: 10.1017/jfm.2017.193

Xu, S. J., Han, D. F. and Ma, Q. (2015). Hydrodynamic forces and moments acting on a remotely operate vehicle with an asymmetric shape moving in a vertical plane. European Journal of Mechanics - B/Fluids, 54, pp. 1-9. doi: 10.1016/j.euromechflu.2015.05.007

Yan, D., Kovacevic, A., Tang, Q. and Zhang, W. H. (2016). Numerical modelling of twin-screw pumps based on computational fluid dynamics. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, doi: 10.1177/0954406216670684

Yan, D., Tang, Q., Kovacevic, A. and Pei, L. (2017). Rotor profile design and numerical analysis of 2–3 type multiphase twin-screw pumps. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, doi: 10.1177/0954408917691798

Yan, S. ORCID: 0000-0001-8968-6616, Li, Q. ORCID: 0000-0001-7456-7868, Wang, J. ORCID: 0000-0003-1821-2362, Ma, Q. ORCID: 0000-0001-5579-6454, Xie, Z. and Stoesser, T. (2019). Comparative Numerical Study on Focusing Wave Interaction with FPSO-like Structure. International Journal of Offshore and Polar Engineering, 29(2), pp. 119-157. doi: 10.17736/ijope.2019.jc754

Yan, S. and Ma, Q. (2011). Improved model for air pressure due to wind on 2D freak waves in finite depth. European Journal of Mechanics - B/Fluids, 30(1), pp. 1-11. doi: 10.1016/j.euromechflu.2010.09.005

Yan, S. and Ma, Q. (2007). Numerical simulation of fully nonlinear interaction between steep waves and 2D floating bodies using the QALE-FEM method. Journal of Computational Physics, 221(2), pp. 666-692. doi: 10.1016/j.jcp.2006.06.046

Yan, S. and Ma, Q. (2009). Numerical simulation of interaction between wind and 2D freak waves. European Journal of Mechanics - B/Fluids, 29(1), pp. 18-31. doi: 10.1016/j.euromechflu.2009.08.001

Yan, S. and Ma, Q. (2012). Numerical study on significance of wind action on 2-D freak waves with different parameters. Journal of Marine Science and Technology, 20(1), pp. 9-17.

Yan, S. and Ma, Q. (2010). QALE-FEM for modelling 3D overturning waves. International Journal for Numerical Methods in Fluids, 63(6), pp. 743-768. doi: 10.1002/fld.2100

Yan, S., Ma, Q. and Cheng, X. (2012). Numerical investigations on transient behaviours of two 3-D freely floating structures by using a fully nonlinear method. Journal of Marine Science and Application, 11(1), pp. 1-9. doi: 10.1007/s11804-012-1099-0

Yang, G., Nawaz, T., Barrick, T. R., Howe, F. A. and Slabaugh, G. G. (2015). Discrete Wavelet Transform-Based Whole-Spectral and Subspectral Analysis for Improved Brain Tumor Clustering Using Single Voxel MR Spectroscopy. IEEE Transactions on Biomedical Engineering, 62(12), pp. 2860-2866. doi: 10.1109/TBME.2015.2448232

Yang, L., Yang, H., Yan, S., Ma, Q. and Bihnam, M. (2016). Comparative study on water impact problem. Proceedings of the International Offshore and Polar Engineering Conference, 2016-J, pp. 27-34.

Yang, Y-F. and Fu, F. ORCID: 0000-0002-9176-8159 (2019). Fire resistance of steel beam to square CFST column composite joints using RC slabs: Experiments and numerical studies. Fire Safety Journal, 104, pp. 90-108. doi: 10.1016/j.firesaf.2019.01.009

Yang, Y-F., Liu, M. and Fu, F. ORCID: 0000-0002-9176-8159 (2018). Experimental and numerical investigation on the performance of three-legged CFST latticed columns under lateral cyclic loadings. Thin-Walled Structures, 132, pp. 176-194. doi: 10.1016/j.tws.2018.08.016

Yang, Y., Wang, Y. and Fu, F. ORCID: 0000-0002-9176-8159 (2014). Effect of reinforcement stiffeners on square concrete-filled steel tubular columns subjected to axial compressive load. Thin-Walled Structures, 82, doi: 10.1016/j.tws.2014.04.009

Yu, Y., Guo, Z. and Ma, Q. ORCID: 0000-0001-5579-6454 (2018). Transmission of Water Waves under Multiple Vertical Thin Plates. Water, 10(4), 517.. doi: 10.3390/w10040517

Yu, Z., Zheng, X. and Ma, Q. ORCID: 0000-0001-5579-6454 (2018). Study on Actuator Line Modeling of Two NREL 5-MW Wind Turbine Wakes. Applied Sciences, 8(3), 434.. doi: 10.3390/app8030434

Zaidi, K. and Rajarajan, M. (2015). Vehicular Internet: Security & Privacy Challenges and Opportunities. Future Internet, 7, pp. 257-275. doi: 10.3390/fi7030257

Zaman, T., Kyriacou, P. A. and Pal, S. (2013). Free flap pulse oximetry utilizing reflectance photoplethysmography. 35th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), pp. 4046-4049. doi: 10.1109/EMBC.2013.6610433

Zhang, N., Zheng, X. and Ma, Q. ORCID: 0000-0001-5579-6454 (2019). Study on wave-induced kinematic responses and flexures of ice floe by Smoothed Particle Hydrodynamics. Computers & Fluids, 189, pp. 46-59. doi: 10.1016/j.compfluid.2019.04.020

Zhang, N., Zheng, X., Ma, Q. ORCID: 0000-0001-5579-6454, Duan, W., Khayyer, A., Lv, X. and Shao, S. (2018). A hybrid stabilization technique for simulating water wave - Structure interaction by incompressible Smoothed Particle Hydrodynamics (ISPH) method. Journal of Hydro-environment Research, 18, pp. 77-94. doi: 10.1016/j.jher.2017.11.003

Zhang, Q. and He, L. (2013). Tip-shaping for HP turbine blade aerothermal performance management. Journal of Turbomachinery, 135(3), doi: 10.1115/1.4007896

Zhang, T., Taylor, R. N., Divall, S. ORCID: 0000-0001-9212-5115, Zheng, G., Sun, J., Stallebrass, S. E. ORCID: 0000-0002-3747-9524 and Goodey, R.J. ORCID: 0000-0002-9166-8393 (2019). Explanation for twin tunnelling-induced surface settlements by changes in soil stiffness on account of stress history. Tunnelling and Underground Space Technology, 85, pp. 160-169. doi: 10.1016/j.tust.2018.12.015

Zhao, Y., Addepalli, S., Sirikham, A. and Roy, R. ORCID: 0000-0001-5491-7437 (2018). A confidence map based damage assessment approach using pulsed thermographic inspection. NDT & E International, 93, pp. 86-97. doi: 10.1016/j.ndteint.2017.10.001

Zhao, Y., Tinsley, L., Addepalli, S., Mehnen, J. and Roy, R. ORCID: 0000-0001-5491-7437 (2016). A coefficient clustering analysis for damage assessment of composites based on pulsed thermographic inspection. NDT & E International, 83, pp. 59-67. doi: 10.1016/j.ndteint.2016.06.003

Zhao, Z., Dai, K., Camara, A. ORCID: 0000-0002-1675-2640, Bitsuamlak, G. and Sheng, C. (2019). Comparison of wind turbine tower failure modes under seismic and wind loads. Journal of Performance of Constructed Facilities, 33(2), doi: 10.1061/(ASCE)CF.1943-5509.0001279

Zheng, H., Dodd, S. J., Dissado, L. A., Fothergill, J., Allais, A. and Kebbabi, L. (2013). Feasibility of using a flat bottom electrode for PEA space charge measurement on mini-cables under high temperatures. 2013 IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP), pp. 1109-1112. doi: 10.1109/CEIDP.2013.6748261

Zheng, H., Dodd, S. J., Dissado, L. A., Fothergill, J., Allais, A. and Kebbabi, L. (2013). A system for PEA space charge measurement on HVDC mini-cables under different isothermal temperatures: Influence of cable clamping force on PEA measurements on HVDC mini-cables. Proceedings of IEEE International Conference on Solid Dielectrics, ICSD, pp. 476-479. doi: 10.1109/ICSD.2013.6619855

Zheng, X., Ma, Q. and Duan, W.Y. (2014). Incompressible SPH method based on Rankine source solution for violent water wave simulation. Journal of Computational Physics, 276, pp. 291-314. doi: 10.1016/j.jcp.2014.07.036

Zheng, X., Ma, Q. ORCID: 0000-0001-5579-6454 and Shao, S. (2018). Study on SPH Viscosity Term Formulations. Applied Sciences, 8(2), 249.. doi: 10.3390/app8020249

Zhou, B., Yang, S., Sun, T. and Grattan, K. T. V. (2014). A novel wireless mobile platform integrated with optical fibre sensors. Proceedings of SPIE - The International Society for Optical Engineering, 9157, doi: 10.1117/12.2059307

Zhou, Y. and Ma, Q. ORCID: 0000-0001-5579-6454 (2018). A New Interface Identification Technique Based on Absolute Density Gradient for Violent Flows. CMES - Computer Modeling in Engineering and Sciences, 115(2), pp. 131-147. doi: 10.3970/cmes.2018.00249

Zhou, Y., Ma, Q. and Yan, S. (2016). MLPG_R method for modelling 2D flows of two immiscible fluids. International Journal for Numerical Methods in Fluids, doi: 10.1002/fld.4353

Zou, C., Fothergill, J. and Rowe, S. W. (2008). The effect of water absorption on the dielectric properties of epoxy nanocomposites. IEEE Transactions on Dielectrics and Electrical Insulation, 15(1), pp. 106-117. doi: 10.1109/T-DEI.2008.4446741

Book Section

Bowyer, S., Kanthou, C. and Reyes-Aldasoro, C. C. (2014). Analysis of capillary-like structures formed by endothelial cells in a novel organotypic assay developed from heart tissue. In: Reyes-Aldasoro, C. C. and Slabaugh, G. G. (Eds.), Medical Image Understanding and Analysis 2014. (pp. 226-231). London: British Machine Vision Association. ISBN 1-901725-51-0

Buckney, D., Kovacevic, A. and Stosic, N. (2013). Experimental validation of a geometry model for twin screw machines. In: 8th International Conference on Compressors and their Systems. (pp. 237-246). Cambridge: Woodhead Publishing. ISBN 9781782421696

Chukanova, E., Stosic, N. and Kovacevic, A. (2013). Numerical analysis of unsteady behaviour of a screw compressor plant system. In: 8th International Conference on Compressors and their Systems. (pp. 129-139). Cambridge: Woodhead Publishing. ISBN 9781782421696

Comuzzi, M. and Spanoudakis, G. (2010). Dynamic set-up of monitoring infrastructures for service based systems. In: Shin, S. Y., Ossowski, S., Schumacher, M., Palakal, M. J. and Hung, C. (Eds.), Proceedings of the 2010 ACM Symposium on Applied Computing. (pp. 2414-2421). ACM. ISBN 978-1-60558-639-7

Divall, S. ORCID: 0000-0001-9212-5115, Stallebrass, S. E. ORCID: 0000-0002-3747-9524, Goodey, R.J. ORCID: 0000-0002-9166-8393 and Ritchie, E. P. (2018). Development of layered models for geotechnical centrifuge tests. In: McNamara, A. M., Divall, S., Goodey, R.J., Taylor, N., Stallebrass, S. E. and Panchal, J. P. (Eds.), Physical Modelling in Geotechnics: Proceedings of the 9th International Conference on Physical Modelling in Geotechnics (ICPMG 2018), July 17-20, 2018, London, United Kingdom. (pp. 143-147). London, UK: CRC Press. ISBN 9781138559752

Fonseca, J., Reyes-Aldasoro, C. C., O'Sullivan, C. and Coop, M. R. (2015). Experimental investigation into the primary fabric of stress transmitting particles. In: Soga, K., Kumar, K., Biscontin, G. and Kuo, M. (Eds.), Geomechanics from Micro to Macro. (pp. 1019-1024). London, UK: CRC Press. ISBN 9781138027077

Heiyanthuduwage, M. A., Mounoury, S. and Kovacevic, A. (2011). Performance prediction methods for screw compressors. In: 7th International Conference on Compressors and their Systems 2011. (pp. 411-420). Woodhead Publishing Limited. ISBN 978-0-85709-208-3

Hessami, A. G. and Karcanias, N. (2010). Systems Assurance, Complexity and Emergence: The Need for a Systems Based Approach. In: Magalhães, S. T. D., Jahankhani, H. and Hessami, A. G. (Eds.), Global Security, Safety, and Sustainability. Communications in Computer and Information Science, 92. (pp. 202-215). Springer. ISBN 9783642157172

Kappos, A. J. (2013). Seismic Vulnerability and Loss Assessment for Buildings in Greece. In: Gueguen, P. (Ed.), Seismic Vulnerability of Structures. (pp. 111-159). Wiley-ISTE. ISBN 1118603966

Kitade, S. and Pullen, K. R. (2016). Flywheel. In: Hashmi, S. (Ed.), Reference Module in Materials Science and Materials Engineering. . Elsevier. ISBN 0128035811

Kovacevic, A. (2008). Competence development in an international product design course. In: Proceedings DESIGN 2008, the 10th International Design Conference. (pp. 1383-1392). The Design Society. ISBN 978-953-6313-89-1

Kovacevic, A. and Rane, S. (2013). 3D CFD analysis of a twin screw expander. In: 8th International Conference on Compressors and their Systems. (pp. 417-429). Cambridge: Woodhead Publishing. ISBN 9781782421696

Kovacevic, A. ORCID: 0000-0002-8732-2242, Vukasinovic, N., Pavkovic, N. and Horak, P. (2017). Evaluation of “Codeve” methodology for teaching npd to virtual design teams. In: Proceedings of the 19th International Conference on Engineering and Product Design Education (E&PDE17), Building Community: Design Education for a Sustainable Future. (pp. 555-560). Glasgow: The Design Society. ISBN 9781904670841

Kyriacou, P. A. and Shafqat, K. (2012). Heart Rate Variability (HRV) and cardiovascular dynamic changes during local anesthesia. In: Kamath, M.V., Watanabe, M.A. and Upton, A.R.M. (Eds.), Heart Rate Variability (HRV) Signal Analysis: Clinical Applications. (pp. 221-240). CRC Press. ISBN 1439849803

Leventides, J., Meintanis, I. and Karcanias, N. (2014). A quasi-Newton optimal method for the global linearisation of the output feedback pole assignment. In: 22nd Mediterranean Conference of Control and Automation (MED). (pp. 157-163). IEEE. ISBN 9781479959006

Li, Y. Q., Hu, Z., Fang, X. and Fonseca, J. (2015). Analysis of micro characteristics and influence factors of foundation pit failure. In: Soga, K., Kumar, K., Biscontin, G. and Kuo, M. (Eds.), Geomechanics from Micro to Macro. (pp. 565-570). London, UK: CRC Press. ISBN 9781138027077

Marian, L. and Giaralis, A. ORCID: 0000-0002-2952-1171 (2013). Optimal design of inerter devices combined with TMDs for vibration control of buildings exposed to stochastic seismic excitation. In: Deodatis, G., Ellingwood, B. R. and Frangopol, D. M. (Eds.), Safety, Reliability, Risk and Life-Cycle Performance of Structures and Infrastructures. (pp. 1025-1032). Boca Raton: CRC Press. ISBN 9781138000865

Mergos, P.E. (2016). Optimum design of reinforced concrete frames according to EC8 and MC2010 with Genetic Algorithms. In: Proceedings of the 7th European Congress on Computational Methods in Applied Sciences and Engineering, ECCOMAS 2016. (pp. 3505-3518). Greece: Institute of Structural Analysis and Antiseismic Research, National Technical University of Athens (NTUA). ISBN 9786188284401

Mergos, P.E. and Kappos, A. J. (2013). Damage Analysis of Reinforced Concrete Structures with Substandard Detailing. In: Papadrakakis, M., Fragiadakis, M. and Plevris, V. (Eds.), Computational methods in earthquake engineering: Volume 2. Computational Methods in Applied Sciences, 30. (pp. 149-176). Springer. ISBN 978-94-007-6572-6

Moschonas, I. F. and Kappos, A. J. (2011). Generalized fragility curves for bearing-supported skew bridges, for arbitrary angle of incidence of the seismic action. In: Papadrakakis, M., Fragiadakis, M. and Plevris, V. (Eds.), Computational Methods in Structural Dynamics and Earthquake Engineering. (pp. 3486-3508). Athens: Institute of Structural Analysis and Antiseismic Research. ISBN 978-960-99994-1-0

Ohadi, A. and Micic, T. (2011). Stochastic process deterioration modelling for adaptive inspections. In: Applications of Statistics and Probability in Civil Engineering. (pp. 322-326). UK: CRC Press. ISBN 9780415669863

Panchal, J. P., McNamara, A. M. ORCID: 0000-0002-3452-0800 and Goodey, R.J. ORCID: 0000-0002-9166-8393 (2018). Influence of geometry on the bearing capacity of sheet piled foundations. In: McNamara, A. M. ORCID: 0000-0002-3452-0800, Divall, S. ORCID: 0000-0001-9212-5115, Goodey, R.J. ORCID: 0000-0002-9166-8393, Taylor, N, Stallebrass, S. E. ORCID: 0000-0002-3747-9524 and Panchal, J. P. (Eds.), Physical Modelling in Geotechnics: Proceedings of the 9th International Conference on Physical Modelling in Geotechnics (ICPMG 2018), July 17-20, 2018, London, United Kingdom. (pp. 1395-1400). Boca Raton: CRC Press/Balkema. ISBN 9781138344228

Paniagua, P., Gylland, A. S., Nordal, S. and Fonseca, J. (2015). Microstructural study of the deformation zones around a penetrating coned tip in silty soil. In: Soga, K., Kumar, K., Biscontin, G. and Kuo, M. (Eds.), Geomechanics from Micro to Macro. (pp. 1593-1598). London, UK: CRC Press. ISBN 9781138027077

Pascu, M., Heiyanthuduwage, M. A., Mounoury, S., Cooke, G.M.E. and Kovacevic, A. (2013). A study on the influence of the suction arrangement on the performance of twin screw compressors. In: ASME 2013 International Mechanical Engineering Congress and Exposition. Fluids Engineering Systems and Technologies, 7 A. . American Society of Mechanical Engineers (ASME). ISBN 978-0-7918-5631-4

Pullen, K. R. and Dhand, A. (2014). Mechanical and electrical flywheel hybrid technology to store energy in vehicles. In: Alternative Fuels and Advanced Vehicle Technologies for Improved Environmental Performance. (pp. 476-504). Woodhead Publishing. ISBN 9780857095220

Rane, S., Kovacevic, A., Stosic, N. and Kethidi, M. (2013). CFD grid generation and analysis of screw compressor with variable geometry rotors. In: 8th International Conference on Compressors and their Systems. (pp. 601-612). Cambridge: Woodhead Publishing. ISBN 9781782421696

Reyes-Aldasoro, C. C., Barri, M. and Hafezparast, M. (2015). Automatic segmentation of focal adhesions from mouse embryonic fibroblasts. In: 2015 IEEE 12th International Symposium on Biomedical Imaging (ISBI). (pp. 548-551). IEEE. ISBN 9781479923748

Rybynok, V., May, J.M., Budidha, K. and Kyriacou, P. A. (2013). Design and Development of a novel Multi-channel Photoplethysmographic Research System. In: 2013 IEEE Point-of-Care Healthcare Technologies (PHT). (pp. 267-270). IEEE. ISBN 978-1-4673-2765-7

Terminelli, L., Carpignano, F., May, J.M., Merlo, S. and Kyriacou, P. A. (2014). Photoplethysmography and electrocardiography for real time evaluation of pulse transit time A diagnostic marker of peripheral vascular diseases. In: 2014 Fotonica AEIT Italian Conference on Photonics Technologies. . Italy: IEEE Computer Society. ISBN 978-8-8872-3718-4

Themistos, C., Rahman, B. M., Markides, C., Uthman, M., Quadir, A. and Kejalakshmy, N. (2014). Characterization of graphene-based devices for THz Systems. In: Terahertz Physics, Devices, and Systems VIII: Advanced Applications in Industry and Defense. . SPIE. ISBN 9781628410396

Monograph

Marris, C. and Jefferson, C. (2013). Workshop on ‘Synthetic biology: containment and release of engineered micro-organisms’ held on 29 April 2013 at King’s College London: Scoping Report. London, UK: King's College London.

Marris, C. and Jefferson, C. (2013). Workshop on ‘Synthetic biology: containment and release of engineered micro-organisms’ held on 29 April 2013 at King’s College London: Summary of Discussions. London, UK: King's College London.

Conference or Workshop Item

Abay, T. and Kyriacou, P. A. (2014). Investigation of photoplethysmography and Near Infrared Spectroscopy for the assessment of tissue blood perfusion. Paper presented at the 36th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBC 2014, 26-08-2014 - 30-08-2014, Chicago, USA.

Abdelmalik, A. A., Fothergill, J., Dodd, S. J., Abbott, A. P. and Harris, R. C. (2011). Effect of side chains on the dielectric properties of alkyl esters derived from palm kernel oil. Proceedings - IEEE International Conference on Dielectric Liquids, ISSN 2153-3725

Abdollahi, Z., Phillips, J. P. and Kyriacou, P. A. (2013). Evaluation of a combined reflectance photoplethysmography and laser Doppler flowmetry surface probe. Paper presented at the Engineering in Medicine and Biology Society (EMBC), 2013 35th Annual International Conference of the IEEE, 3 July - 7 July 2013, Osaka.

Abokhedr, M., Vogiatzaki, K., Mitroglou, N. and Gavaises, E. (2015). A numerical simulation of single and two-phase flow in porous media: A pore sale observation of effective microscopic forces. Paper presented at the 6th BETA CAE International Conference, 10-6-2015 - 12-6-2015, MET Hotel, Thessaloniki, Greece.

Akerman, S., Reyes-Aldasoro, C. C., Fisher, M., Pettyjohn, K. L., Björndahl, M. A., Evans, H. and Tozer, G. M. (2009). Microflow of fluorescently labelled red blood cells in tumours expressing single isoforms of VEGF and their response to VEGF-R tyrosine kinase inhibition. Paper presented at the 2nd Micro and Nano Flows Conference (MNF2009), 01-09-2009 - 02-09-2009, London, Uk.

Arjeneh, M., Kovacevic, A. ORCID: 0000-0002-8732-2242, Stosic, N. and Gavaises, M. ORCID: 0000-0003-0874-8534 (2014). Study of Multiphase Flow at the Suction of Screw Compressor. Paper presented at the 22nd International Compressor Engineering Conference at Purdue 2014, 14 - 17 July 2014, West Lafayette, Indiana.

Arjeneh, M., Pullen, K. R. and Etemad, S. (2013). Experimental study of radial low specific speed turbocompressor running in reverse as turboexpander. Paper presented at the 8th International Conference on Compressors and their Systems, 09-09-2013 - 10-09-2013, City University London, UK.

Arnold, P., Rakocevic, V., Ramos, O. and Habermann, J. (2013). Algorithms for adaptive radio resource management in relay-assisted LTE-A networks. IEEE Vehicular Technology Conference, pp. 1-5. ISSN 1550-2252

Arshi, H.S., Stone, K.J.L., Vaziri, M., Newson, T.A., El-Marassi, M., Taylor, R.N. and Goodey, R.J. (2013). Modelling of monopile-footing foundation system for offshore structures. Paper presented at the 18th International Conference on Soil Mechanics and Geotechnical Engineering, 02-05 Sep 2013, Paris, France.

Arthur, M.T. and Atkin, C.J. Transition modelling for viscous flow prediction.. Paper presented at the 36th AIAA Fluid Dynamics Conference and Exhibit, 5-8 June 2006, San Francisco, California.

Asad, M., Gentet, E., Basaru, R. R. and Slabaugh, G. G. (2015). Generating a 3d hand model from frontal color and range scans. In: 2015 IEEE International Conference on Image Processing (ICIP). (pp. 4589-4593). IEEE. ISBN 9781479983391

Atkin, C.J. (2014). Convergence of calculated transition loci during computational analysis of transonic aerofoils and infinite swept wings. Paper presented at the 29th Congress of the International Council of the Aeronautical Sciences, ICAS 2014, 7-12 Sep 2014, St Petersburg, Russia.

Atkin, C.J. (2004). Performance trade-off studies for a retrofit Hybrid Laminar Flow Control system. Paper presented at the 2nd AIAA Flow Control Conference, 26 June - 1 July, Portland, Oregon.

Atkin, C.J. Predicting the mission performance of a retrofit Hybrid Laminar Flow Control system. Paper presented at the Aerospace Aerodynamics Research Conference, 2002.

Bai, Y., Khoylou, A., Debs, M., Shi, S., Fabian, M., Sun, T., Grattan, K. T. V. and McKinnon, B. (2014). Dielectric Properties and Numerical Modelling of Microwave Heating of Portland Cement/Fly Ash Blends. Paper presented at the 34th Cement and Concrete Science Conference, 14-16 Sep 2014, Sheffield, UK.

Bai, Y., Shi, S., Fabian, M., Arms, M, Sun, T, Grattan, K. T. V., Li, H., Xu, D.L. and Basheer, P.A.M. (2014). Microwave Curing Techniques for Manufacturing Alkali-activated Fly Ash. Paper presented at the 34th Annual Cement and Concrete Science Conference, 14-16 Sep 2014, Sheffield, UK.

Bhalerao, A., Pase, L., Lieschke, G. J., Renshaw, S. A. and Reyes-Aldasoro, C. C. (2012). Local affine texture tracking for serial registration of zebrafish images. Paper presented at the 2012 9th IEEE International Symposium on Biomedical Imaging (ISBI), 02-05-2012-05-05-2012, Barcelona, Spain.

Blazakis, K. N., Reyes-Aldasoro, C. C., Styles, V., Venkataraman, C. and Madzvamuse, A. (2014). An optimal control approach to cell tracking. Paper presented at the Inverse Problems from Theory to Applications Conference (IPTA2014), 26-08-2014 - 28-08-2014, Bristol, UK.

Bohari, B. and Sayma, A. I. (2010). CFD analysis of effects of damage due to bird strike on fan performance. Paper presented at the ASME Turbo Expo 2010: Power for Land, Sea, and Air, 14-06-2010 - 18-06-2010, Glasgow, UK.

Brown, C. J., Goodey, R.J. ORCID: 0000-0002-9166-8393 and Rotter, J. M. (2017). Bending of rectangular plates subject to non-uniform pressure distributions relevant to containment structures. Paper presented at the Eurosteel 2017, 13-15 Sep 2017, Copenhagen, Denmark.

Chalashkanov, N. M., Dodd, S. J. and Fothergill, J. (2012). Influence of water absorption in flexible epoxy resins on the space charge behaviour. Paper presented at the IEEE Conference on Electrical Insulation and Dielectric Phenomena, 14 - 17 October 2012, Montréal, Canada.

Chalashkanov, N. M., Dodd, S. J. and Fothergill, J. (2012). Limitations of Kramers-Kronig transform for calculation of the DC conductance magnitude from dielectric measurements. Paper presented at the IEEE Conference on Electrical Insulation and Dielectric Phenomena, 14 - 17 October 2012, Montréal, Canada.