City Research Online

Article

Abay, T. and Kyriacou, P. A. (2015). Accuracy of reflectance photoplethysmography on detecting cuff-induced vascular occlusions. 37th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), 2015, pp. 861-864. doi: 10.1109/EMBC.2015.7318498

Abay, T. and Kyriacou, P. A. (2014). Investigation of Photoplethysmography and Near Infrared Spectroscopy for the Assessment of Tissue Blood Perfusion. 2014 36th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), pp. 5361-5364. doi: 10.1109/EMBC.2014.6944837

Abay, T. Y. and Kyriacou, P. A. (2016). Comparison of NIRS, laser Doppler flowmetry, photoplethysmography, and pulse oximetry during vascular occlusion challenges. Physiological Measurement, 37(4), doi: 10.1088/0967-3334/37/4/503

Abay, T. Y. and Kyriacou, P. A. (2017). Photoplethysmography for blood volumes and oxygenation changes during intermittent vascular occlusions. Journal of Clinical Monitoring and Computing, doi: 10.1007/s10877-017-0030-2

Abdelmalik, A. A., Abbott, A. P., Fothergill, J., Dodd, S. J. and Harris, R. C. (2011). Synthesis of a base-stock for electrical insulating fluid based on palm kernel oil. Industrial Crops and Products, 33(2), pp. 532-536. doi: 10.1016/j.indcrop.2010.11.019

Abdelmalik, A. A., Dodd, S. J., Dissado, L. A., Chalashkanov, N. M. and Fothergill, J. (2014). Charge transport in thermally aged paper impregnated with natural ester oil. IEEE Transactions on Dielectrics and Electrical Insulation, 21(5), pp. 2318-2328. doi: 10.1109/TDEI.2014.004316

Abdollahi, Z., Phillips, J. P. and Kyriacou, P. A. (2013). Evaluation of a combined reflectance photoplethysmography and laser Doppler flowmetry surface probe. 35th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), pp. 1728-1731. doi: 10.1109/EMBC.2013.6609853

Abdollahi, Z., Thaha, M. A., Ramsanahie, A., Ahmed, S., Kyriacou, P. A. and Phillips, J. P. (2015). Performance of a novel optical sensor for intraoperative assessment of intestinal viability - 'proof of principle' study. GUT, 64, A47-A48. doi: 10.1136/gutjnl-2015-309861.95

Aboukhedr, M., Georgoulas, A., Marengo, M., Gavaises, M. ORCID: 0000-0003-0874-8534 and Vogiatzaki, K. (2018). Simulation of micro-flow dynamics at low capillary numbers using adaptive interface compression. Computers & Fluids, 165, pp. 13-32. doi: 10.1016/j.compfluid.2018.01.009

Abro, F. I., Rajarajan, M., Chen, T. and Rahulamathavan, Y. (2017). Android application collusion demystified. Communications in Computer and Information Science, 759, pp. 176-187. doi: 10.1007/978-3-319-65548-2_14

Abu-Nimeh, S., Chen, T. and Alzubi, O. (2011). Malicious and spam posts in online social networks. Computer, 44(9), pp. 23-28. doi: 10.1109/MC.2011.222

Acarali, D., Rajarajan, M., Komninos, N. and Herwono, I. (2016). Survey of Approaches and Features for the Identification of HTTP-Based Botnet Traffic. Journal of Network and Computer Applications, doi: 10.1016/j.jnca.2016.10.007

Adamsky, F., Khayam, S. A., Jaeger, R. and Rajarajan, M. (2014). Stealing bandwidth from BitTorrent seeders. Computers & Security, 46, pp. 126-140. doi: 10.1016/j.cose.2014.07.009

Adcock, T. A. A., Taylor, P. H., Yan, S., Ma, Q. and Janssen, P. A. E. M. (2011). Did the Draupner wave occur in a crossing sea?. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 467(2134), pp. 3004-3021. doi: 10.1098/rspa.2011.0049

Agrawal, A., Azabi, Y. O. and Rahman, B. M. (2013). Stacking the Equiangular Spiral. IEEE Photonics Technology Letters, 25(3), pp. 291-294. doi: 10.1109/LPT.2012.2236309

Agrawal, A. and Cabrera-Espana, F. (2016). Hut-like pillar array Si Solar Cells. Solar Energy, 132, pp. 357-362. doi: 10.1016/j.solener.2016.03.026

Agrawal, A., Kejalakshmy, N., Chen, J. and Grattan, K. T. V. (2008). Golden spiral photonic crystal fiber: polarization and dispersion properties. Optics Letters, 33(22), pp. 2716-2718. doi: 10.1364/OL.33.002716

Agrawal, A., Kejalakshmy, N., Rahman, B. M. and Grattan, K. T. V. (2010). Polarization and dispersion properties of elliptical hole golden spiral photonic crystal fiber. Applied Physics B: Lasers and Optics, 99(4), pp. 717-726. doi: 10.1007/s00340-010-4023-9

Agrawal, A., Kejalakshmy, N., Uthman, M., Rahman, B. M., Kumar, A. and Grattan, K. T. V. (2012). Ultra low bending loss equiangular spiral photonic crystal fibers in the terahertz regime. AIP Advances, 2, doi: 10.1063/1.4726055

Agrawal, A., Oates, A. and Cabrera-Espana, F. (2014). Fabrication and characterisation of Si micropillar PV structures. Materials Research Innovations, 18(7), pp. 500-504. doi: 10.1179/1433075X14Y.0000000244

Agrawal, A. and Sharma, A. (2004). Perfectly Matched Layer in Numerical Wave Propagation: Factors that Affect its Performance. Applied Optics, 43(21), pp. 4225-4231. doi: 10.1364/AO.43.004225

Agrawal, A., Tiwari, M., Azabi, Y. O., Janyani, V., Rahman, B. M. and Grattan, K. T. V. (2013). Ultrabroad supercontinuum generation in tellurite equiangular spiral photonic crystal fiber. Journal of Modern Optics, 60(12), pp. 956-962. doi: 10.1080/09500340.2013.825334

Ahmad, A.H., Naher, S. and Brabazon, D. (2014). Injection tests and effect on microstructure and properties of aluminium 7075 direct thermal method feedstock billets. Key Engineering Materials, 611, pp. 1637-1644. doi: 10.4028/www.scientific.net/KEM.611-612.1637

Ahmad, A.H., Naher, S. and Brabazon, D. (2014). The effect of direct thermal method, temperature and time on microstructure of a cast aluminum alloy. Materials and Manufacturing Processes, 29(2), pp. 134-139. doi: 10.1080/10426914.2013.822980

Ahumada, A., Altunkaynak, A. and Ayoub, A. (2015). Fuzzy logic-based attenuation relationships of strong motion earthquake records. Expert Systems with Applications, 42(3), pp. 1287-1297. doi: 10.1016/j.eswa.2014.09.035

Akerman, S., Fisher, M., Daniel, R. A., Lefley, D. V., Reyes-Aldasoro, C. C., Lunt, S. J., Harris, S., Björndahl, M. A., Williams, L. J., Evans, H., Barber, P. R., Prise, V. E., Vojnovic, B., Kanthou, C. and Tozer, G. M. (2013). Influence of soluble or matrix-bound isoforms of vascular endothelial growth factor-A on tumor response to vascular-targeted strategies. International Journal of Cancer, 133(11), pp. 2563-2576. doi: 10.1002/ijc.28281

Akerman, S., Reyes-Aldasoro, C. C., Fisher, M., Pettyjohn, K. L., Björndahl, M. A., Evans, H. and Tozer, G. M. (2011). Microflow of fluorescently labelled red blood cells in tumours expressing single isoforms of VEGF and their response to vascular targeting agents. Medical Engineering & Physics, 33(7), pp. 805-809. doi: 10.1016/j.medengphy.2010.09.006

Alwis, L., Bustamante, H., Bremer, K., Roth, B., Sun, T. and Grattan, K. T. V. (2016). Evaluation of the durability and performance of FBG-based sensors for monitoring moisture in an aggressive gaseous waste sewer environment. Journal of Lightwave Technology, doi: 10.1109/JLT.2016.2593260

Aminah, N. S., Themistos, C., Hidayat, R., Djamal, M. and Rahman, B. M. (2017). Evolution of Surface Plasmon Supermodes in Metal-Clad Microwire and its Potential for Biosensing. Journal of Lightwave Technology, 35(21), pp. 4684-4691. doi: 10.1109/JLT.2017.2753318

Aming, A. and Rahman, B. M. A. ORCID: 0000-0001-6384-0961 (2018). Design and Characterization Low-loss modes in Dielectric-Coated Hollow-core waveguides at THz Frequency. Journal of Lightwave Technology, 36(13), pp. 2716-2722. doi: 10.1109/JLT.2018.2820690

Aming, A., Uthman, M., Chitaree, R., Mohammed, W. S. and Rahman, B. M. (2016). Design and Characterization of Porous Core Polarization Maintaining Photonic Crystal Fiber for THz Guidance. Journal of Lightwave Technology, 34(23), pp. 5583-5590. doi: 10.1109/JLT.2016.2623657

Amiryar, M. E. and Pullen, K. R. (2017). A Review of Flywheel Energy Storage System Technologies and Their Applications. Applied Sciences, 7(3), p. 286. doi: 10.3390/app7030286

Amiryar, M. E., Pullen, K. R. ORCID: 0000-0001-8501-9226 and Nankoo, D. (2018). Development of a high-fidelity model for an electrically driven energy storage flywheel suitable for small scale residential applications. Applied Sciences, 8(3), 453.. doi: 10.3390/app8030453

Andrienko, G. and Andrienko, N. (2015). Visualization Support to Interactive Cluster Analysis. Lecture Notes in Computer Science, 9286, pp. 337-340. doi: 10.1007/978-3-319-23461-8_43

Apostolopoulos, C., Halikias, G., Maroukian, K. and Tsaramirsis, G. (2016). Facilitating organisational decision making: a change risk assessment model case study. Journal of Modelling in Management, 11(2), pp. 694-721. doi: 10.1108/JM2-05-2014-0035

Apostolopoulou, D. ORCID: 0000-0002-9012-9910, Anastasopoulos, K. and Bahramirad, S. (2016). Effects of Solar and Wind Generation Integration on Feeder Hosting Capacity. Transmission and Distribution Conference and Exposition (T&D), 2016 IEEE/PES, 2016, 7520022.. doi: 10.1109/TDC.2016.7520022

Apostolopoulou, D. ORCID: 0000-0002-9012-9910, Dominguez-Garcia, A. D. and Sauer, P. W. (2016). An Assessment of the Impact of Uncertainty on Automatic Generation Control Systems. IEEE Transactions on Power Systems, 31(4), pp. 2657-2665. doi: 10.1109/TPWRS.2015.2475415

Apriyanto, H., Ravet, G., Bernal, O.D., Cattoen, M., Seat, H.C., Chavagnac, V., Surre, F. and Sharp, J. H. (2018). Comprehensive Modeling of Multimode Fiber Sensors for Refractive Index Measurement and Experimental Validation. Scientific Reports, 8, 5912.. doi: 10.1038/s41598-018-24153-0

Aqida, S.N, Brabazon, D. and Naher, S. (2012). An investigation of phase transformation and crystallinity in laser surface modified H13 steel. Applied Physics A: Materials Science & Processing, 110(3), pp. 673-678. doi: 10.1007/s00339-012-7149-2

Aqida, S.N., Brabazon, D. and Naher, S. (2012). Atomic diffusion in laser surface modified AISI H13 steel. Applied Physics A: Materials Science & Processing, 112(1), pp. 139-142. doi: 10.1007/s00339-012-7214-x

Aqida, S.N., Calosso, F., Brabazon, D., Naher, S. and Rosso, M. (2010). Thermal fatigue properties of laser treated steels. International Journal of Material Forming, 3(S1), pp. 797-800. doi: 10.1007/s12289-010-0890-1

Aristovich, E. and Khan, S. (2013). Non-invasive measurement of cholesterol in human blood by impedance technique: an investigation by 2D finite element field modelling. Journal of Physics: Conference Series, 459(1), 012030. doi: 10.1088/1742-6596/459/1/012030

Aristovich, E. and Khan, S. (2013). Non-invasive measurement of cholesterol in human blood by impedance technique: an investigation by 3D finite element field modelling. Journal of Physics: Conference Series, 450(1), 012057. doi: 10.1088/1742-6596/450/1/012057

Aristovich, K. Y. and Khan, S. (2010). Automatic procedure for realistic 3D finite element modelling of human brain for bioelectromagnetic computations. Journal of Physics: Conference Series, 238(1), 012065. doi: 10.1088/1742-6596/238/1/012065

Aristovich, K. Y. and Khan, S. (2010). A new submodelling technique for multi-scale finite element computation of electromagnetic fields: application in bioelectromagnetism. Journal of Physics: Conference Series, 238(1), 012050. doi: 10.1088/1742-6596/238/1/012050

Aristovich, K. Y., Khan, S. and Borovkov, A. I. (2011). Investigation of optimal parameters for finite element solution of the forward problem in magnetic field tomography based on magnetoencephalography. Journal of Physics: Conference Series, 307(1), 012015. doi: 10.1088/1742-6596/307/1/012015

Arjeneh, M., Kovacevic, A., Manolis, M. and Stosic, N. (2015). Numerical and Experimental Investigation of Pressure Losses at Suction of a Twin Screw Compressor. IOP Conference Series: Materials Science and Engineering, 90(1), 012006. doi: 10.1088/1757-899X/90/1/012006

Arsalan, M., Qureshi, A., Khan, A. U. and Rajarajan, M. (2017). Protection of medical images and patient related information in healthcare: Using an intelligent and reversible watermarking technique. Applied Soft Computing Journal, 51, pp. 1668-179. doi: 10.1016/j.asoc.2016.11.044

Arunkumar, S., Soyluoglu, B., Sensoy, M., Srivatsa, M. and Rajarajan, M. (2017). Location attestation and access control for mobile devices using GeoXACML. Journal of Network and Computer Applications, 80, pp. 181-188. doi: 10.1016/j.jnca.2016.11.028

Asad, M. and Slabaugh, G. G. (2016). Learning Marginalization through Regression for Hand Orientation Inference. 2016 IEEE Conference on Computer Vision and Pattern Recognition Workshops (CVPRW), pp. 1215-1223. doi: 10.1109/CVPRW.2016.154

Asenov, M., Mojsilović, N. and Micic, T. (2016). Reliability of masonry walls subjected to in-plane loading: A slip failure along head joints / Zuverlässigkeit von Mauerwerkswänden bei Belastung in der Ebene: Versagen entlang der Stoßfugenflucht. Mauerwerk, 20(4), pp. 271-283. doi: 10.1002/dama.201600700

Asif, W., Lestas, M., Khaliq Qureshi, H. and Rajarajan, M. (2016). Optimization based spectral partitioning for node criticality assessment. Journal of Network and Computer Applications, 75, pp. 279-292. doi: 10.1016/j.jnca.2016.09.003

Asif, W., Lestas, M., Qureshi, H. K. and Rajarajan, M. (2015). Spectral Partitioning for Node Criticality. 2015 IEEE Symposium on Computers and Communication (ISCC), pp. 877-882. doi: 10.1109/ISCC.2015.7405624

Asif, W., Qureshi, A., Iqbal, M. and Rajarajan, M. (2014). On the Complexity of Average Path length for Biological Networks and Patterns. International Journal of Biomathematics, 7(4), doi: 10.1142/S1793524514500387

Asif, W., Qureshi, H. K., Rajarajan, M. and Lestas, M. (2016). Combined Banzhaf & Diversity Index (CBDI) for critical node detection. Journal of Network and Computer Applications, 64, pp. 76-88. doi: 10.1016/j.jnca.2015.11.025

Asif, W., Rajarajan, M. and Lestas, M. (2018). Increasing user controllability on device specific privacy in the Internet of Things. Computer Communications, 116, pp. 200-211. doi: 10.1016/j.comcom.2017.11.009

Athanasios, N., Nikolopoulos, N., Nikolaos, M., Panagiotis, G. and Kakaras, E. (2015). Optimization of a log wood boiler through CFD simulation methods. Fuel Processing Technology, 137, pp. 75-92. doi: 10.1016/j.fuproc.2015.04.010

Atkin, C.J. (2001). New aerodynamic approaches to suction system design. Notes on Numerical Fluid Mechanics, 76(3), pp. 55-63. doi: 10.1007/978-3-540-45359-8_7

Atsonios, K., Violidakis, I., Agraniotis, M., Grammelis, P., Nikolopoulos, N. and Kakaras, E. (2015). Thermodynamic analysis and comparison of retrofitting pre-drying concepts at existing lignite power plants. Applied Thermal Engineering, 74, pp. 165-173. doi: 10.1016/j.applthermaleng.2013.11.007

Axtmann, G., Hegner, F., Brücker, C. and Rist, U. (2016). Investigation and prediction of the bending of single and tandem pillars in a laminar cross flow. Journal of Fluids and Structures, 66, pp. 110-126. doi: 10.1016/j.jfluidstructs.2016.07.017

Axtmann, G., Rist, U., Hegner, F. and Bruecker, C. (2016). Numerical investigation of the bending of slenderwall-mounted cylinders in low reynolds number flow. Notes on Numerical Fluid Mechanics and Multidisciplinary Design, 132, pp. 191-201. doi: 10.1007/978-3-319-27279-5_17

Ayoub, A. and Filippou, F. C. (2010). Finite-Element Model for Pretensioned Prestressed Concrete Girders. Journal of Structural Engineering, 136(4), pp. 401-409. doi: 10.1061/(ASCE)ST.1943-541X.0000132,

Bai, Y., Shi, S., Fabian, M., Sun, T., Grattan, K. T. V., McKinnon, B., Gupta, A. and McCague, C. (2016). Potential of Microwave Curing for Precast Concrete Manufacture. Institute of Concrete Technology Yearbook, pp. 61-66.

Banerjee, J. R. and Kennedy, D. (2014). Dynamic stiffness method for inplane free vibration of rotating beams including Coriolis effects. Journal of Sound and Vibration, 333(26), pp. 7299-7312. doi: 10.1016/j.jsv.2014.08.019

Banerjee, J. R., Liu, X. and Kassem, H. I. (2014). Aeroelastic stability analysis of high aspect ratio aircraft wings. Journal of Applied Nonlinear Dynamics, 3(4), pp. 413-422. doi: 10.5890/JAND.2011.12.001

Banerjee, J. R., Papkov, S.O., Liu, X. and Kennedy, D. (2015). Dynamic stiffness matrix of a rectangular plate for the general case. JOURNAL OF SOUND AND VIBRATION, 342, doi: 10.1016/j.jsv.2014.12.031

Banks, S. P. and Tomas-Rodriguez, M. (2008). From local to global control. 47th IEEE Conference on Decision and Control, 2008. CDC 2008, pp. 4426-4430. doi: 10.1109/CDC.2008.4739231

Barambones, O., Irigoyen, E. and Tomas-Rodriguez, M. (2015). Introduction to the special section "Techniques of stability of fuzzy control systems". Revista Iberoamericana de Automática e Informática Industrial RIAI, 12(4), pp. 432-433. doi: 10.1016/j.riai.2015.09.003

Barbur, J. L., Llapashtica, E., Connolly, D. M., Sadler, J., Sun, T. and Grattan, K. T. V. (2017). The EMAIL test – measurement of integrated saccade latency and visual processing times without eye-tracking. Aerospace medicine and human performance, 88(3), p298.

Barh, A., Pal, B. P., Agrawal, G. P., Varshney, R. K. and Rahman, B. M. (2016). Specialty Fibers for Terahertz Generation and Transmission: A Review. IEEE Journal of Selected Topics in Quantum Electronics, 22(2), 8500215-.. doi: 10.1109/JSTQE.2015.2494537

Barh, A., Pal, B. P., Varshney, R. K. and Rahman, B. M. (2012). Design of a compact SOI polarization rotator for mid-IR application. CODEC 2012 - 5th International Conference on Computers and Devices for Communication, pp. 1-4. doi: 10.1109/CODEC.2012.6509320

Barh, A., Rahman, B. M., Varshney, R. K. and Pal, B. P. (2013). Design and Performance Study of a Compact SOI Polarization Rotator at 1.55 mu m. Journal of Lightwave Technology, 31(23), pp. 3687-3693. doi: 10.1109/JLT.2013.2286859

Barh, A., Rahman, B. M., Varshney, R. K. and Pal, B. P. (2013). An efficient polarization converter for Mid-IR wavelength. Advanced Photonics 2013, JT3A.20. doi: 10.1364/IPRSN.2013.JT3A.20

Barh, A., Varshney, R. K., Agrawal, G. P., Rahman, B. M. and Pal, B. P. (2015). Plastic fiber design for THz generation through wavelength translation. Optics Letters, 40(9), pp. 2107-2110. doi: 10.1364/OL.40.002107

Barh, A., Varshney, R. K., Pal, B. P., Agrawal, G. P. and Rahman, B. M. (2016). Design of a Polymer-Based Hollow-Core Bandgap Fiber for Low-Loss Terahertz Transmission. IEEE Photonics Technology Letters, 28(15), pp. 1703-1706. doi: 10.1109/LPT.2016.2544198

Bauer, D., Chaves, H. and Arcoumanis, C. (2012). Measurements of void fraction distribution in cavitating pipe flow using x-ray CT. Measurement Science and Technology, 23(5), 055302.. doi: 10.1088/0957-0233/23/5/055302

Bauer, K. and Bruecker, C. (2014). Behavior of oscillatory tube flow at liquid-gas interfaces. Physics of Fluids, 26(7), 072106.. doi: 10.1063/1.4890717

Bayer, N., Xu, B., Rakocevic, V. and Habermann, J. (2010). Application-aware scheduling for VoIP in Wireless Mesh Networks. Computer Networks, 54(2), pp. 257-277. doi: 10.1016/j.comnet.2009.05.014

Belhaj, A., Phillips, J. P., Kyriacou, P. A. and Langford, R. M. (2016). Comparison of non-invasive peripheral venous saturations with venous blood co-oximetry. Journal of Clinical Monitoring and Computing, doi: 10.1007/s10877-016-9959-9

Belschner, J., Rakocevic, V. ORCID: 0000-0002-3081-0448 and Habermann, J. (2018). Complexity of coordinated beamforming and scheduling for OFDMA based heterogeneous networks. Wireless Networks, doi: 10.1007/s11276-017-1645-4

Belschner, J., de Abreu, D., Habermann, J. and Rakocevic, V. (2013). Scheduling Algorithm for Coordinated Beamforming in Heterogeneous Macro/Pico LTE-Advanced Networks. 2013 IEEE 77th Vehicular Technology Conference (VTC Spring), pp. 1-5. doi: 10.1109/VTCSpring.2013.6692741

Bender, S. B., Castorena-Gonzalez, J. A., Garro, M., Reyes-Aldasoro, C. C., Sowers, J. R., DeMarco, V. G. and Martinez-Lemus, L. A. (2015). Regional variation in arterial stiffening and dysfunction in western diet-induced obesity. AJP - Heart and Circulatory Physiology, 309(4), H574-H582. doi: 10.1152/ajpheart.00155.2015

Bergeles, G., Koukouvinis, P., Gavaises, M., Li, J. and Wang, L. (2015). An Erosion Aggressiveness Index (EAI) Based on Pressure Load Estimation Due to Bubble Collapse in Cavitating Flows Within the RANS Solvers. SAE International Journal of Engines, 8(5), pp. 2276-2284. doi: 10.4271/2015-24-2465

Berger, T., Halikias, G. and Karcanias, N. (2015). Effects of dynamic and non-dynamic element changes in RC and RL networks. International Journal of Circuit Theory and Applications, 43(1), pp. 36-59. doi: 10.1002/cta.1923

Bernal, O.D., Seat, H.C., Zabit, U., Surre, F. and Bosch, T. (2016). Robust Detection of Non-Regular Interferometric Fringes From a Self-Mixing Displacement Sensor Using Bi-Wavelet Transform. IEEE Sensors Journal, 16(22), pp. 7903-7910. doi: 10.1109/JSEN.2016.2599702

Bianchi, G., Kovacevic, A. and Cipollone, R. (2017). Deforming grid generation for numerical simulations of fluid dynamics in sliding vane rotary machines. Advances in Engineering Software, 112, pp. 180-191. doi: 10.1016/j.advengsoft.2017.05.010

Bianchi, G., Kovacevic, A., Cipollone, R., Murgia, S. and Contaldi, G. (2017). Grid generation methodology and CFD simulations in sliding vane compressors and expanders. IOP Conference Series: Materials Science and Engineering, 232(012053), doi: 10.1088/1757-899X/232/1/012053

Bilotta, E. and Stallebrass, S. E. (2009). Prediction of stresses and strains around model tunnels with adjacent embedded walls in overconsolidated clay. Computers and Geotechnics, 36(6), pp. 1049-1057. doi: 10.1016/j.compgeo.2009.03.015

Blasco, J. and Chen, T. ORCID: 0000-0001-8037-1685 (2018). Automated generation of colluding apps for experimental research. Journal of Computer Virology and Hacking Techniques, pp. 127-138. doi: 10.1007/s11416-017-0296-4

Blasco, J., Chen, T. ORCID: 0000-0001-8037-1685, Muttik, I. and Roggenbach, M. (2018). Detection of app collusion potential using logic programming. Journal of Network and Computer Applications, 105, doi: 10.1016/j.jnca.2017.12.008

Blasco, J., Chen, T. ORCID: 0000-0001-8037-1685, Tapiador, J. and Peris-Lopez, P. (2016). A Survey of Wearable Biometric Recognition Systems. ACM Computing Surveys, 49(3), 43.. doi: 10.1145/2968215

Blasco, J., Hernandez-Castro, J. C., Tapiador, J. M. E., Ribagorda, A. and Orellana-Quiros, M. A. (2009). Steganalysis of Hydan. IFIP Advances in Information and Communication Technology, 297, pp. 132-142. doi: 10.1007/978-3-642-01244-0_12

Blazakis, K. N., Madzvamuse, A., Reyes-Aldasoro, C. C., Styles, V. and Venkataraman, C. (2015). Whole cell tracking through the optimal control of geometric evolution laws. Journal of Computational Physics, 297, pp. 495-514. doi: 10.1016/j.jcp.2015.05.014

Bobba, S. S. and Agrawal, A. (2017). Ultra-broad Mid-IR Supercontinuum Generation in Single, Bi and Tri Layer Graphene Nano-Plasmonic waveguides pumping at Low Input Peak Powers. Scientific Reports, 7(1), 10192.. doi: 10.1038/s41598-017-10141-3

Bond, S.J. (2011). The aeroplane is talking to you: What you should do to listen to it. IFA News, 2011, pp. 18-19.

Boscolo, M. and Banerjee, J. R. (2012). Dynamic stiffness formulation for composite Mindlin plates for exact modal analysis of structures. Part I: Theory. Computers & Structures, 96-97, pp. 61-73. doi: 10.1016/j.compstruc.2012.01.002

Boscolo, M. and Banerjee, J. R. (2012). Dynamic stiffness formulation for composite Mindlin plates for exact modal analysis of structures. Part II: Results and applications. Computers & Structures, 96-97, pp. 74-83. doi: 10.1016/j.compstruc.2012.01.003

Boscolo, M. and Banerjee, J. R. (2014). Layer-wise dynamic stiffness solution for free vibration analysis of laminated composite plates. Journal of Sound and Vibration, 333(1), pp. 200-227. doi: 10.1016/j.jsv.2013.08.031

Bottemanne, M. and Atkin, C.J. (2018). Tool for sizing suction pumps for hybrid laminar flow control concepts. International Journal of Mechanical Engineering and Robotics Research, 7(1), pp. 1-8. doi: 10.18178/ijmerr.7.1.1-8

Bremer, K., Meinhardt-Wollweber, M., Thiel, T., Werner, G., Sun, T., Grattan, K. T. V. and Roth, B. (2014). Sewerage tunnel leakage detection using a fibre optic moisture-detecting sensor system. Sensors and Actuators A: Physical, 220, pp. 62-68. doi: 10.1016/j.sna.2014.09.018

Bremer, K., Wollweber, M., Guenther, S., Werner, G., Sun, T., Grattan, K. T. V. and Roth, B. (2014). Fibre optic humidity sensor designed for highly alkaline environments. Proceedings of SPIE - The International Society for Optical Engineering, 9157, A4. doi: 10.1117/12.2059637

Bruecker, C. (2016). Measurement of near-wall 3D flow velocity from wave-guiding micro-pillars. Optics Express, 24(19), pp. 21407-21414. doi: 10.1364/OE.24.021407

Bruecker, C., Kirmse, C. and Triep, M. (2016). Feedback of the Glottal Jet Flow with Supraglottal Wall Oscillations. Acta Acustica united with Acustica, 102(2), pp. 240-243. doi: 10.3813/AAA.918940

Bruecker, C. and Mikulich, V. (2017). Sensing of minute airflow motions near walls using pappus-type nature-inspired sensors. PLoS One, 12(6), e0179253. doi: 10.1371/journal.pone.0179253

Brücker, C., Schlegel, D. and Triep, M. (2016). Feather Vibration as a Stimulus for Sensing Incipient Separation in Falcon Diving Flight. Natural Resources, 07(07), pp. 411-422. doi: 10.4236/nr.2016.77036

Brücker, C. and Weidner, C. (2014). Influence of self-adaptive hairy flaps on the stall delay of an airfoil in ramp-up motion. Journal of Fluids and Structures, 47, pp. 31-40. doi: 10.1016/j.jfluidstructs.2014.02.014

Buckney, D., Kovacevic, A. and Stosic, N. (2016). Design and evaluation of rotor clearances for oil-injected screw compressors. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 231(1), pp. 26-37. doi: 10.1177/0954408916660342

Buckney, D., Kovacevic, A. and Stosic, N. (2015). Rotor clearance design and evaluation for an oil injected twin screw compressor. IOP Conference Series: Materials Science and Engineering, 90(1), 012003. doi: 10.1088/1757-899X/90/1/012003

Budidha, K., Abay, T. and Kyriacou, P. A. (2015). Investigation of photoplethysmography, laser doppler flowmetry and near infrared spectroscopy during induced thermal stress. 37th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), 2015, pp. 6417-6420. doi: 10.1109/EMBC.2015.7319861

Budidha, K. and Kyriacou, P. A. (2013). Development of an optical probe to investigate the suitability of measuring photoplethysmographs and blood oxygen saturation from the human auditory canal. 2013 35th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), 2013, pp. 1736-1739. doi: 10.1109/EMBC.2013.6609855

Budidha, K. and Kyriacou, P. A. (2017). In vivo investigation of ear canal pulse oximetry during hypothermia. Journal of Clinical Monitoring and Computing, doi: 10.1007/s10877-017-9975-4

Budidha, K. and Kyriacou, P. A. (2014). Investigation of Pulse Transit Times utilizing multisite reflectance photoplethysmography under conditions of artificially induced peripheral vasoconstriction. 2014 36th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), pp. 1965-1968. doi: 10.1109/EMBC.2014.6943998

Budidha, K. and Kyriacou, P. A. (2014). The human ear canal: investigation of its suitability for monitoring photoplethysmographs and arterial oxygen saturation. Physiological Measurement, 35(2), pp. 111-128. doi: 10.1088/0967-3334/35/2/111

Budidha, K. ORCID: 0000-0002-6329-8399, Rybynok, V and Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2018). Design and Development of a Modular, Multichannel Photoplethysmography System. IEEE Transactions on Instrumentation and Measurement, 67(8), pp. 1954-1965. doi: 10.1109/TIM.2018.2810643

Buhl, S., Gleiss, F., Köhler, M., Hartmann, F., Messig, D., Bruecker, C. and Hasse, C. (2016). A combined numerical and experimental study of the 3D tumble structure and piston boundary layer development during the intake stroke of a gasoline engine. Flow, Turbulence and Combustion,

Camara, A. and Astiz, M. A. (2014). Analysis and Control of Cable-Stayed Bridges Subject to Seismic Action. Structural Engineering International, 24(1), pp. 27-36. doi: 10.2749/101686614X13830790993762

Camara, A. and Astiz, M. A. (2012). Pushover analysis for the seismic response prediction of cable-stayed bridges under multi-directional excitation. Engineering Structures, 41, pp. 444-455. doi: 10.1016/j.engstruct.2012.03.059

Camara, A., Astiz, M. A. and Ye, A. J. (2014). Fundamental mode estimation for modern cable-stayed bridges considering the tower flexibility. Journal of Bridge Engineering, 19(6), 04014015. doi: 10.1061/(ASCE)BE.1943-5592.0000585

Camara, A., Cristantielli, R., Astiz, M. A. and Malaga-Chuquitaype, C. (2017). Design of hysteretic dampers with optimal ductility for the transverse seismic control of cable-stayed bridges. Earthquake Engineering & Structural Dynamics, doi: 10.1002/eqe.2884

Camara, A. and Efthymiou, E. (2016). Deck-tower interaction in the transverse seismic response of cable-stayed bridges and optimum con figurations. Engineering Structures, 124, pp. 494-506. doi: 10.1016/j.engstruct.2016.06.017

Camara, A., Nguyen, K., Ruiz-Teran, A. M. and Stafford, P. J. (2014). Serviceability limit state of vibrations in under-deck cable-stayed bridges accounting for vehicle-structure interaction. Engineering Structures, 61, pp. 61-72. doi: 10.1016/j.engstruct.2013.12.030

Camara, A. and Ruiz-Teran, A. M. (2015). Multi-mode traffic-induced vibrations in composite ladder-deck bridges under heavy moving vehicles. Journal of Sound and Vibration, 355, pp. 264-283. doi: 10.1016/j.jsv.2015.06.026

Camara, A., Ruiz-Teran, A. M. and Stafford, P. J. (2013). Structural behaviour and design criteria of under-deck cable-stayed bridges subjected to seismic action. Earthquake Engineering and Structural Dynamics, 42(6), pp. 891-912. doi: 10.1002/eqe.2251

Camara, A., Vazquez, V. F., Ruiz-Teran, A. M. and Paje, S. E. (2017). Influence of the pavement surface on the vibrations induced by heavy traffic in road bridges. Canadian Journal of Civil Engineering, 44(12), pp. 1099-1111. doi: 10.1139/cjce-2017-0310

Cao, J., Sun, T. and Grattan, K. T. V. (2014). Gold nanorod-based localized surface plasmon resonance biosensors: A review. Sensors and Actuators, B: Chemical, 195(May), pp. 332-351. doi: 10.1016/j.snb.2014.01.056

Carlton, J., Smart, R. and Jenkins, V. (2011). The nuclear propulsion of merchant ships: Aspects of engineering, science and technology. Journal of Marine Engineering and Technology, 10(2), pp. 47-59. doi: 10.1080/20464177.2011.11020247

Castillo-Rivera, S. and Tomas-Rodriguez, M. (2017). Helicopter flap/lag energy exchange study. Nonlinear Dynamics, 88(4), pp. 2933-2946. doi: 10.1007/s11071-017-3422-4

Castillo-Rivera, S. and Tomas-Rodriguez, M. (2018). Helicopter modelling and study of the accelerated rotor. Advances in Engineering Software, 115, pp. 52-65. doi: 10.1016/j.advengsoft.2017.08.012

Castillo-Rivera, S. and Tomas-Rodriguez, M. (2016). Helicopter nonlinear aerodynamics modelling using VehicleSim. Advances in Engineering Software, 100, pp. 252-265. doi: 10.1016/j.advengsoft.2016.08.001

Castro Alvaredo, O. and Fring, A. (2002). Conductance from Non-perturbative Methods I. JHEP Conference Proceedings, unesp(2002), 015.

Castro Alvaredo, O. and Fring, A. (2003). Conductance from Non-perturbative Methods II. JHEP Conference Proceedings, unesp(2002), 010.

Chalashkanov, N. M., Dodd, S. J., Dissado, L. A. and Fothergill, J. (2016). The Role of Bulk Charge Transport Processes in Electrical Tree Formation and Breakdown Mechanisms in Epoxy Resins. IEEE Transactions on Dielectrics and Electrical Insulation, 23(6), pp. 3256-3266. doi: 10.1109/TDEI.2016.006141

Chang, S. H., Maney, K., Phillips, J. P., Langford, R. M. and Mehta, V. (2010). A comparison of the respiratory effects of oxycodone versus morphine: a randomised, double-blind, placebo-controlled investigation. Anaesthesia, 65(10), pp. 1007-1012. doi: 10.1111/j.1365-2044.2010.06498.x

Chassaing, J. C., Sayma, A. I. and Imregun, M. (2008). A combined time and frequency domain approach for acoustic resonance prediction. Journal of Sound and Vibration, 311(3-5), pp. 1100-1113. doi: 10.1016/j.jsv.2007.10.006

Chatterjee, S., Phillips, J. P. and Kyriacou, P. A. (2015). Differential pathlength factor estimation for brain-like tissue from a single-layer Monte Carlo model. 37th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), 2015, pp. 3279-3282. doi: 10.1109/EMBC.2015.7319092

Chatterjee, S., Phillips, J. P. and Kyriacou, P. A. (2017). Investigating optical path in reflectance pulse oximetry using a multilayer monte carlo model. SPIE Proceedings, 10411, doi: 10.1117/12.2281612

Chen, B., Riley, P. H., Abakr, Y. A., Pullen, K. R., Hann, D. B. and Johnson, C. (2013). Design and development of a low-cost, electricity-generating cooking Score-Stove™. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 227(7), pp. 803-813. doi: 10.1177/0957650913498733

Chen, R., Zhao, T., Wu, W., Wu, F., Li, L., Qian, J., Xu, R., Wu, H., Albishri, H. M., Al-Bogami, A. S., El-Hady, D. A., Lu, J. and Amine, K. (2014). Free-Standing Hierarchically Sandwich-Type Tungsten Disulfide Nanotubes/Graphene Anode for Lithium-Ion Batteries. Nano Letters, 14(10), pp. 5899-5904. doi: 10.1021/nl502848z

Chen, T. (2010). Web filtering and censoring. IEEE Computer, 43(3), pp. 94-97. doi: 10.1109/MC.2010.84

Chen, T., Sanchez-Aarnoutse, J. C. and Buford, J. (2011). Petri net modeling of cyber-physical attacks on smart grid. IEEE Transactions on Smart Grid, 2(4), pp. 741-749. doi: 10.1109/TSG.2011.2160000

Chen, T. and Zeng, Y. (2009). Classification of traffic flows into QoS classes by unsupervised learning and KNN clustering. KSII Trans. on Internet and Information Systems, 3(2), pp. 134-146. doi: 10.3837/tiis.2009.02.001

Chen, Y., Vidakovic, M., Fabian, M., Swift, M., Brun, L., Sun, T. and Grattan, K. T. V. (2017). A temperature compensated fibre Bragg grating (FBG)-based sensor system for condition monitoring of electrified railway pantograph. Proceedings of SPIE - The International Society for Optical Engineering, 10323, 103236T. doi: 10.1117/12.2263998

Chenouda, M. and Ayoub, A. (2008). Inelastic Displacement Ratios of Degrading Systems. Journal of Structural Engineering, 134(6), pp. 1030-1045. doi: 10.1061/(ASCE)0733-9445(2008)134:6(1030)

Chikarakara, E., Naher, S. and Brabazon, D. (2012). High speed laser surface modification of Ti-6Al-4V. Surface and Coatings Technology, 206(14), pp. 3223-3229. doi: 10.1016/j.surfcoat.2012.01.010

Cho, C-G., Kappos, A. J., Moon, H-J. and Lim, H-J. (2015). Experiments and failure analysis of SHCC and reinforced concrete composite slabs. Engineering Failure Analysis, 56, pp. 320-331. doi: 10.1016/j.engfailanal.2015.01.009

Choo, K-K. R., Rana, O. F. and Rajarajan, M. (2017). Cloud Security Engineering: Theory, Practice and Future Research. IEEE Transactions on Cloud Computing, 5(3), pp. 372-374. doi: 10.1109/TCC.2016.2582278

Christou, D., Karcanias, N. and Mitrouli, M. (2016). Approximate least common multiple of several polynomials using the ERES division algorithm. Linear Algebra and Its Applications, 511, pp. 141-175. doi: 10.1016/j.laa.2016.09.010

Christou, D., Karcanias, N. and Mitrouli, M. (2010). The ERES method for computing the approximate GCD of several polynomials. Applied Numerical Mathematics, 60(1-2), pp. 94-114. doi: 10.1016/j.apnum.2009.10.002

Christou, D., Karcanias, N. and Mitrouli, M. (2014). Matrix representation of the shifting operation and numerical properties of the ERES method for computing the greatest common divisor of sets of many polynomials. Journal of Computational and Applied Mathematics, 260, pp. 54-67. doi: 10.1016/j.cam.2013.09.021

Christou, D., Karcanias, N., Mitrouli, M. and Triantafyllou, D. (2011). Numerical and Symbolical Methods for the GCD of Several Polynomials. Lecture Notes in Electrical Engineering, 80, pp. 123-144. doi: 10.1007/978-94-007-0602-6

Chrysostomou, C. Z., Kyriakides, N., Kappos, A. J., Kouris, L., Georgiou, E. and Millis, M. (2013). Seismic retrofitting and health monitoring of school buildings of Cyprus. Open Construction and Building Technology Journal, 7, pp. 208-220. doi: 10.2174/1874836801307010208

Chrysostomou, C. Z., Kyriakides, N., Papanikolaou, V.K., Kappos, A. J., Dimitrakopoulos, E. G. and Giouvanidis, A. I. (2015). Vulnerability assessment and feasibility analysis of seismic strengthening of school buildings. Bulletin of Earthquake Engineering, 13(12), pp. 3809-3840. doi: 10.1007/s10518-015-9791-5

Constantinou, L., Kyriacou, P. A. ORCID: 0000-0002-2868-485X and Triantis, I. (2017). Towards an optimized tetrapolar electrical impedance lithium detection probe for bipolar disorder: A simulation study. 2017 IEEE SENSORS, 2017-D, doi: 10.1109/ICSENS.2017.8234225

Constantinou, L., Triantis, I., Bayford, R. and Demosthenous, A. (2014). High-power CMOS current driver with accurate transconductance for electrical impedance tomography. IEEE Transactions on Biomedical Circuits and Systems, 8(4), pp. 575-583. doi: 10.1109/TBCAS.2013.2285481

Constantinou, L., Triantis, I., Hickey, M. and Kyriacou, P. A. (2017). On the merits of tetrapolar impedance spectroscopy for monitoring lithium concentration variations in human blood plasma. IEEE Transactions on Biomedical Engineering, 64(3), pp. 601-609. doi: 10.1109/TBME.2016.2570125

Coombs, W.M. and Crouch, R.S. (2011). Algorithmic issues for three-invariant hyperplastic Critical State models. Computer Methods in Applied Mechanics and Engineering, 200(25-28), pp. 2297-2318. doi: 10.1016/j.cma.2011.03.019

Coombs, W.M. and Crouch, R.S. (2011). Non-associated Reuleaux plasticity: Analytical stress integration and consistent tangent for finite deformation mechanics. Computer Methods in Applied Mechanics and Engineering, 200(9-12), pp. 1021-1037. doi: 10.1016/j.cma.2010.11.012

Coombs, W.M., Crouch, R.S. and Augarde, C.E. (2010). Reuleaux plasticity: Analytical backward Euler stress integration and consistent tangent. Computer Methods in Applied Mechanics and Engineering, 199(25-28), pp. 1733-1743. doi: 10.1016/j.cma.2010.01.017

Correa, F. and Fring, A. (2016). Regularized degenerate multi-solitons. Journal of High Energy Physics, 2016(9), 8.. doi: 10.1007/JHEP09(2016)008

Crerar-Gilbert, A. J., Kyriacou, P. A., Jones, D. P. and Langford, R. M. (2002). Assessment of photoplethysmographic signals for the determination of splanchnic oxygen saturation in humans. Anaesthesia, 57(5), pp. 442-445. doi: 10.1046/j.0003-2409.2001.02453.x

Crozier, C., Apostolopoulou, D. ORCID: 0000-0002-9012-9910 and McCulloch, M. (2018). Mitigating the Impact of Personal Vehicle Electrification: a Power Generation Perspective. Energy Policy, doi: 10.1016/j.enpol.2018.03.056

Cvjetkovic, M. and Rakocevic, V. (2016). Alternative Topology Construction for Cooperative Data Distribution in Mobile Ad Hoc Networks. 2016 8th International Congress on Ultra Modern Telecommunications and Control Systems and Workshops (ICUMT), pp. 171-176. doi: 10.1109/ICUMT.2016.7765352

Dai, K., Sheng, C., Zhao, Z., Yi, Z., Camara, A. and Bitsuamlak, G. (2017). Nonlinear response history analysis and collapse mode study of a wind turbine tower subjected to tropical cyclonic winds. Wind and Structures, 25(1), pp. 79-100. doi: 10.12989/was.2017.25.1.079

Danilova, N. and Stupples, D. (2012). Application of Natural Language Processing and Evidential Analysis to Web-Based Intelligence Information Acquisition. Intelligence and Security Informatics Conference (EISIC), Proceedings, doi: 10.1109/EISIC.2012.41

Dasari, B. L., Morshed, M.M., Nouri, J. M. ORCID: 0000-0001-8610-3737, Brabazon, D. and Naher, S. (2018). Mechanical properties of graphene oxide reinforced aluminium matrix composites. Composites Part B: Engineering, 145, pp. 136-144. doi: 10.1016/j.compositesb.2018.03.022

Dasari, B. L., Nouri, J. M., Brabazon, D. and Naher, S. (2017). Graphene and derivatives – Synthesis techniques, properties and their energy applications. Energy, 140(1), pp. 766-778. doi: 10.1016/j.energy.2017.08.048

Dasari, B. L., Nouri, J. M., Brabazon, D. and Naher, S. (2017). Parametric study for graphene reinforced aluminum matrix composites production using Box Behnken design. AIP Conference Proceedings, 1896(1), 130006.. doi: 10.1063/1.5008155

Davenport, J. J., Hickey, M., Phillips, J. P. and Kyriacou, P. A. (2017). Dual pO₂/pCO₂ fibre optic sensing film. The Analyst, 142(10), pp. 1711-1719. doi: 10.1039/C7AN00173H

Davenport, J. J., Hickey, M., Phillips, J. P. and Kyriacou, P. A. (2016). Fiber-optic fluorescence-quenching oxygen partial pressure sensor using platinum octaethylporphyrin. Applied Optics, 55(21), pp. 5603-5609. doi: 10.1364/AO.55.005603

Davenport, J. J., Hickey, M., Phillips, J. P. and Kyriacou, P. A. (2016). Method for producing angled optical fiber tips in the laboratory. Optical Engineering, 55(2), 026120. doi: 10.1117/1.OE.55.2.026120

Davenport, J. J., Hickey, M., Phillips, J. P. and Kyriacou, P. A. (2015). A fiberoptic sensor for tissue carbon dioxide monitoring. 37th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), 2015, pp. 7942-7945. doi: 10.1109/EMBC.2015.7320234

De Martino, A., Hütten, A. and Egger, R. (2013). Landau Levels and Edge States in Graphene with Strong Spin-Orbit Coupling. NATO Science for Peace and Security Series B: Physics and Biophysics, 2013, pp. 97-117. doi: 10.1007/978-94-007-6618-1_8

Deakin, M., Morstyn, T., Apostolopoulou, D. ORCID: 0000-0002-9012-9910 and McCulloch, M. (2018). The Value of Reactive Power for Voltage Control in Lossy Networks. 2018 IEEE Power & Energy Society General Meeting (PESGM), doi: 10.1109/PESGM.2018.8586256

Degirmenci, E., Surre, F., Philippe, S., Maldonado-Basilio, R. and Landais, P. (2012). Improved Bend Waveguide Design for Terahertz Transmission. IEEE Transactions on Terahertz Science and Technology, 2(1), pp. 137-143. doi: 10.1109/TTHZ.2011.2177170

Demirol, E. and Ayoub, A. (2017). Inelastic Displacement Ratios of SSI Systems. Soil Dynamics and Earthquake Engineering, 96, pp. 104-114.

Dennis, R. and Pullen, K. R. (2013). Development of a wood-fired cooking stove to incorporate a thermo-acoustic engine-generator unit. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 227(7), pp. 740-751. doi: 10.1177/0957650913498735

Dennis, R. and Pullen, K. R. (2017). Vehicles for rural transport services in sub-Saharan Africa. Proceedings of the Institution of Civil Engineers - Transport, doi: 10.1680/jtran.15.00081

Dhand, A. and Pullen, K. R. (2016). Analysis of Dual Mode Continuously Variable Transmission for Flywheel Energy Storage Systems. SAE Technical Papers, .2016_01_1177. doi: 10.4271/2016-01-1177

Dhand, A. and Pullen, K. R. (2015). Analysis of continuously variable transmission for flywheel energy storage systems in vehicular application. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 229(2), pp. 273-290. doi: 10.1177/0954406214533096

Dhand, A. and Pullen, K. R. (2015). Optimal energy management for a flywheel-assisted battery electric vehicle. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 229(12), pp. 1672-1682. doi: 10.1177/0954407014567720

Dhand, A. and Pullen, K. R. (2013). Review of Flywheel based Internal Combustion Engine Hybrid Vehicles. International Journal of Automotive Technology, 14(5), pp. 797-804. doi: 10.1007/s12239-013-0088-x

Dhand, A. and Pullen, K. R. (2015). Review of battery electric vehicle propulsion systems incorporating flywheel energy storage. International Journal of Automotive Technology, 16(3), pp. 487-500. doi: 10.1007/s12239-015-0051-0

Dhand, A. and Pullen, K. R. (2013). Simulation based study of battery electric vehicle performance in real world cycles. International Journal of Electric and Hybrid Vehicles, 5(4), pp. 327-343. doi: 10.1504/IJEHV.2013.059372

Di Gravio, G., Patriarca, R., Constantino, F. and Sikora, I. (2017). Safety Assessment For An ATM System Change: A Methodology For The ANSPs. PROMET - Traffic & Transportation, 29(1), pp. 99-107.

Diego-Ayala, U., Martinez-Gonzalez, P., McGlashan, N. and Pullen, K. R. (2008). The mechanical hybrid vehicle: an investigation of a flywheel-based vehicular regenerative energy capture system. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 222(11), pp. 2087-2101. doi: 10.1243/09544070JAUTO677

Dimitrakopoulos, E. G., Kappos, A. J. and Makris, N. (2009). Dimensional analysis of yielding and pounding structures for records without distinct pulses. Soil Dynamics and Earthquake Engineering, 29(7), pp. 1170-1180. doi: 10.1016/j.soildyn.2009.02.006

Dimitrakopoulos, E. G., Makris, N. and Kappos, A. J. (2009). Dimensional analysis of the earthquake-induced pounding between adjacent structures. Earthquake Engineering and Structural Dynamics, 38(7), pp. 867-886. doi: 10.1002/eqe.872

Dimitrakopoulos, E. G., Makris, N. and Kappos, A. J. (2011). Dimensional analysis of the earthquake-induced pounding between inelastic structures. Bulletin of Earthquake Engineering, 9(2), pp. 561-579. doi: 10.1007/s10518-010-9220-8

Dissanayake, K. P. W., Wu, W., Nguyen, H., Sun, T. and Grattan, K. T. V. (2017). Graphene oxide coated long period grating based fibre optic humidity sensor. Proceedings of SPIE - The International Society for Optical Engineering, 10323, 1032346.. doi: 10.1117/12.2265465

Dissanayake, K. P. W., Wu, W., Nguyen, H., Sun, T. and Grattan, K. T. V. (2017). Graphene oxide-coated Long Period Grating-based fibre optic sensor for relative humidity and external refractive index. Journal of Lightwave Technology, PP(99), doi: 10.1109/JLT.2017.2756097

Divall, S. and Goodey, R.J. (2012). Apparatus for centrifuge modelling of twin-tunnel construction. INTERNATIONAL JOURNAL OF PHYSICAL MODELLING IN GEOTECHNICS, 12(3), pp. 102-111. doi: 10.1680/ijpmg.11.00014

Divall, S. and Goodey, R.J. (2012). Novel apparatus for generating ground movements around sequential twin tunnels in over-consolidated clay. Online publication by Proceedings of the ICE - Geotechnical Engineering, pp. 10-11.

Divall, S. and Goodey, R.J. (2015). Twin-tunnelling-induced ground movements in clay. Proceedings of the Institution of Civil Engineers: Geotechnical Engineering, 168(3), pp. 247-256. doi: 10.1680/geng.14.00054

Divall, S., Goodey, R.J. and Stallebrass, S. E. (2017). Twin-tunnelling-induced changes to clay stiffnesses. Géotechnique, doi: 10.1680/jgeot.sip17.P.151

Divall, S., Taylor, R. N. and Xu, M. (2016). Centrifuge modelling of tunnelling with forepoling. International Journal of Physical Modelling in Geotechnics, 16(2), pp. 83-95. doi: 10.1680/jphmg.15.00019

Ekonomou, L. (2010). Greek long-term energy consumption prediction using artificial neural networks. Energy, 35(2), pp. 512-517. doi: 10.1016/j.energy.2009.10.018

Elks, P. M., van Eeden, F. J., Dixon, G., Wang, X., Reyes-Aldasoro, C. C., Ingham, P., Whyte, M., Walmsley, S. R. and Renshaw, S. A. (2011). Activation of hypoxia-inducible factor-1α (Hif-1α) delays inflammation resolution by reducing neutrophil apoptosis and reverse migration in a zebrafish inflammation model. Blood, 118(3), pp. 712-722. doi: 10.1182/blood-2010-12-324186

Elmufti, K., Weerasinghe, D., Rajarajan, M., Rakocevic, V., Khan, S. and MacDonald, J. (2008). Mobile Web services authentication using SAML and 3GPP generic bootstrapping architecture. International Journal of Information Security, 8(2), pp. 77-87. doi: 10.1007/s10207-008-0065-y

Elshalakani, M. and Bruecker, C. ORCID: 0000-0001-5834-3020 (2018). Spontaneous Synchronization of Beating Cilia: An Experimental Proof Using Vision-Based Control. Fluids, 3(2), 30.. doi: 10.3390/fluids3020030

Emami, S. D., Lee, H. L., Rahman, M. M., Abdullah, F., Abdul-Rashid, H. A., Dashtabi, M. M. and Rahman, B. M. (2017). Evolution of Surface Acoustic Waves in an Optical Microfiber. IEEE Journal of Quantum Electronics, 53(5), 6800808.. doi: 10.1109/JQE.2017.2747152

Estelles Martinez, S. and Tomas-Rodriguez, M. (2014). Seguimiento de trayectorias tridimensionales de un quadrotor mediante control PVA. Revista Iberoamericana de Automática e Informática Industrial, 11(1), pp. 54-67. doi: 10.1016/j.riai.2013.11.004

Evangelou, S. A., Limebeer, D. J. N. and Tomas-Rodriguez, M. (2008). Influence of Road Camber on Motorcycle Stability. Journal Of Applied Mechanics, 75(6), 061020.. doi: 10.1115/1.2937140

Evangelou, S. A., Limebeer, D. J. N. and Tomas-Rodriguez, M. (2013). Suppression of Burst Oscillations in Racing Motorcycles. Journal Of Applied Mechanics, 80(1), JAM-10. doi: 10.1115/1.4006491

Evans, A. and Schäfer, A. (2013). The Rebound Effect in the Aviation Sector. Energy Economics, 36, pp. 158-165. doi: 10.1016/j.eneco.2012.12.005

Fabian, M., Hind, D., Gerada, C., Sun, T. and Grattan, K. T. V. (2018). Comprehensive monitoring of electrical machine parameters using an integrated fibre Bragg grating-based sensor system. Journal of Lightwave Technology, 36(4), pp. 1046-1051. doi: 10.1109/JLT.2017.2771143

Fabian, M., Hind, D., Gerada, C., Sun, T. and Grattan, K. T. V. (2017). Multi-parameter monitoring of electrical machines using integrated fibre Bragg gratings. Proceedings of SPIE - The International Society for Optical Engineering, 10323, 103231I. doi: 10.1117/12.2264928

Fabian, M., Jia, Y., Shi, S., McCague, C., Bai, Y., Sun, T. and Grattan, K. T. V. (2016). Optimization of the accelerated curing process of concrete using a fibre Bragg grating-based control system and microwave technology. Proceedings of SPIE, 9916, 99160P. doi: 10.1117/12.2236856

Faghih, F., Das, D. and Ayoub, A. (2017). Seismic behavior of fiber reinforced steel-concrete composite systems. Procedia Engineering, 171, pp. 899-908. doi: 10.1016/j.proeng.2017.01.386

Fahad, L. G., Khan, A. U. and Rajarajan, M. (2015). Activity recognition in smart homes with self verification of assignments. Neurocomputing, 149(C), pp. 1286-1298. doi: 10.1016/j.neucom.2014.08.069

Fahad, L. G. and Rajarajan, M. (2015). Integration of discriminative and generative models for activity recognition in smart homes. Applied Soft Computing Journal, 37, pp. 992-1001. doi: 10.1016/j.asoc.2015.03.045

Faruki, M. J., Ab Razak, M. Z., Azzuhri, S. R., Rahman, M. T., Soltanian, M. R. K., Brambilla, G., Rahman, B. M., Grattan, K. T. V., De La Rue, R. M. and Ahmad, H. (2016). Effect of titanium dioxide (TiO₂) nanoparticle coating on the detection performance of microfiber knot resonator sensors for relative humidity measurement. Materials Express, 6(6), pp. 501-508. doi: 10.1166/mex.2016.1342

Fatouros, S., Karcanias, N., Christou, D. and Papadopoulos, P. (2013). Approximate greatest common divisor of many polynomials and pseudo-spectrum. System, Structure and Control, 5(1), pp. 623-628. doi: 10.3182/20130204-3-FR-2033.00113

Favier, J., Li, C., Kamps, L., Revell, A., O Connor, J. and Brücker, C. (2017). The PELskin project—part I: fluid–structure interaction for a row of flexible flaps: a reference study in oscillating channel flow. Meccanica, 52(8), pp. 1767-1780. doi: 10.1007/s11012-016-0521-0

Favier, J., Pinelli, A. and Piomelli, U. (2011). Control of the separated flow around an airfoil using a wavy leading edge inspired by humpback whale flippers. Comptes Rendus Mecanique, 340(1), pp. 107-114. doi: 10.1016/j.crme.2011.11.004

Favier, J., Revell, A. and Pinelli, A. (2016). Fluid Structure Interaction of Multiple Flapping Filaments Using Lattice Boltzmann and Immersed Boundary Methods. Advances in fluid structure interaction, 133, pp. 167-178. doi: 10.1007/978-3-319-27386-0_10

Favier, J., Revell, A. and Pinelli, A. (2014). A Lattice Boltzmann-Immersed Boundary method to simulate the fluid interaction with moving and slender flexible objects. Journal of Computational Physics, 261, pp. 145-161. doi: 10.1016/j.jcp.2013.12.052

Favier, J., Revell, A. and Pinelli, A. (2015). Numerical study of flapping filaments in a uniform fluid flow. Journal of Fluids and Structures, 53, pp. 26-35. doi: 10.1016/j.jfluidstructs.2014.11.010

Fazzolari, F. A., Banerjee, J. R. and Boscolo, M. (2013). Buckling of composite plate assemblies using higher order shear deformation theory-An exact method of solution. Thin-Walled Structures, 71, pp. 18-34. doi: 10.1016/j.tws.2013.04.017

Fazzolari, F. A., Boscolo, M. and Banerjee, J. R. (2013). An exact dynamic stiffness element using a higher order shear deformation theory for free vibration analysis of composite plate assemblies. Composite Structures, 96, pp. 262-278. doi: 10.1016/j.compstruct.2012.08.033

Fiaz, M., Yousaf, R., Hanfi, M., Asif, W., Qureshi, H. K. and Rajarajan, M. (2014). Adding the reliability on tree based topology construction algorithms for wireless sensor networks. Wireless Personal Communications, 74(2), pp. 989-1004. doi: 10.1007/s11277-013-1334-2

Fonseca, J., Nadimi, S., Reyes-Aldasoro, C. C., O’Sullivan, C. and Coop, M. R. (2016). Image-based investigation into the primary fabric of stress transmitting particles in sand. Soils and Foundations, 56(5), pp. 818-834. doi: 10.1016/j.sandf.2016.08.007

Fonseca, J., O'Sullivan, C., Coop, M. R. and Lee, P. D. (2013). Quantifying the evolution of soil fabric during shearing using directional parameters. Géotechnique, 63(6), pp. 487-499. doi: 10.1680/geot.12.P.003

Fonseca, J., O'Sullivan, C., Coop, M. R. and Lee, P. D. (2013). Quantifying the evolution of soil fabric during shearing using scalar parameters. Géotechnique, 63(10), pp. 818-829. doi: 10.1680/geot.11.P.150

Fonseca, J., O'Sullivan, C., Nagira, T., Yasuda, H. and Gourlay, C. M. (2013). In situ study of granular micromechanics in semi-solid carbon steels. Acta Materialia, 61(11), pp. 4169-4179. doi: 10.1016/j.actamat.2013.03.043

Fonseca, J., Sim, W., Shire, T. and O'Sullivan, C. (2014). Microstructural analysis of sands with varying degrees of internal stability. Geotechnique, 64(5), pp. 405-411. doi: 10.1680/geot.13.T.014

Foote, C. A., Castorena-Gonzalez, J. A., Ramirez-Perez, F. I., Jia, G., Hill, M. A., Reyes-Aldasoro, C. C., Sowers, J. R. and Martinez-Lemus, L. A. (2016). Arterial stiffening in western diet-fed mice is associated with increased vascular elastin, transforming growth factor-ß, and plasma neuraminidase. Frontiers in Physiology, 7, p. 285. doi: 10.3389/fphys.2016.00285

Fu, F. (2010). 3-D nonlinear dynamic progressive collapse analysis of multi-storey steel composite frame buildings—Parametric study. Engineering Structures, 32(12), pp. 3974-3980. doi: 10.1016/j.engstruct.2010.09.008

Fu, F. (2016). 3D finite element analysis of the whole-building behavior of tall building in fire. Advances in Computational Design, 1(4), pp. 329-344. doi: 10.12989/acd.2016.1.4.329

Fu, F. (2009). Progressive collapse analysis of high-rise building with 3-D finite element modeling method. Journal of Constructional Steel Research, 65(6), pp. 1269-1278. doi: 10.1016/j.jcsr.2009.02.001

Fu, F. ORCID: 0000-0002-9176-8159 (2005). Structural behavior and design methods of Tensegrity domes. Journal of Construction Steel Research, 61(1), pp. 23-35. doi: 10.1016/j.jcsr.2004.06.004

Fu, F., Lam, D. and Ye, J. Q. (2010). Moment resistance and rotation capacity of semi-rigid composite connections with precast hollowcore slabs. Journal of Constructional Steel Research, 66(3), pp. 452-461. doi: 10.1016/j.jcsr.2009.10.016

Fu, F. ORCID: 0000-0002-9176-8159 and Parke, G. A. (2018). Assessment of the Progressive Collapse Resistance of Double-layer Grid Space Structures using implicit and explicit solvers. International Journal of Steel Structures, doi: 10.1007/s13296-018-0030-1

Fu, X., Li, S., Fairbank, M., Wunsch, D. C. and Alonso, E. (2015). Training Recurrent Neural Networks With the Levenberg-Marquardt Algorithm for Optimal Control of a Grid-Connected Converter. IEEE Transactions on Neural Networks and Learning Systems, 26(9), pp. 1900-1912. doi: 10.1109/TNNLS.2014.2361267

Gabdullin, N and Khan, S. (2016). Study of Non-Homogeneity of Magnetic Field Distribution in Single-Crystal Ni-Mn-Ga Magnetic Shape Memory Element in Actuators due to its Anisotropic Twinned Microstructure. IEEE Transactions on Magnetics, doi: 10.1109/TMAG.2016.2640201

Gabdullin, N. and Khan, S. (2016). Electromagnetic and thermal analyses of high performance magnetic shape memory actuators for valve applications. IEEE Transactions on Magnetics, 52(9), doi: 10.1109/TMAG.2016.2563406

Gabdullin, N. and Khan, S. (2015). Review of properties of magnetic shape memory (MSM) alloys and MSM actuator designs. Journal of Physics: Conference Series, 588(1), 012052. doi: 10.1088/1742-6596/588/1/012052

Gajrani, J., Tripathi, M., Laxmi, V., Gaur, M. S., Conti, M. and Rajarajan, M. (2017). sPECTRA: a Precise framEwork for analyzing CrypTographic vulneRabilities in Android apps. 2017 14th IEEE Annual Consumer Communications & Networking Conference (CCNC), pp. 854-860. doi: 10.1109/CCNC.2017.7983245

Ganapathy, H., White, D. C., Cormack, R. S., Kyriacou, P. A., Rybynok, V. and Pal, S. K. (2006). Measuring psychomotor responses. British Journal Of Anaesthesia, 97(3), 431P-442P. doi: 10.1093/bja/ael146

Gao, S., Guo, L., Fu, F. and Zhang, S.H. (2017). Capacity of semi-rigid composite joints in accommodating column loss. Journal of Constructional Steel Research, 139(12), pp. 288-301. doi: 10.1016/j.jcsr.2017.09.029

Gavaises, M. (2008). Flow in valve covered orifice nozzles with cylindrical and tapered holes and link to cavitation erosion and engine exhaust emissions. International Journal of Engine Research, 9(6), doi: 10.1243/14680874JER01708

Gavaises, M., Andriotis, A., Papoulias, D., Mitroglou, N. and Theodorakakos, A. (2009). Characterization of string cavitation in large-scale Diesel nozzles with tapered holes. Physics of Fluids, 21(5), 052107. doi: 10.1063/1.3140940

Gavaises, M., Villa, F., Koukouvinis, P., Marengo, M. and Franc, J-P. (2015). Visualisation and les simulation of cavitation cloud formation and collapse in an axisymmetric geometry. International Journal of Multiphase Flow, 68, pp. 14-26. doi: 10.1016/j.ijmultiphaseflow.2014.09.008

Gendy, S. S. F. M. and Ayoub, A. ORCID: 0000-0002-2670-9662 (2018). Explicit fiber beam-column elements for impact analysis of structures. Journal of Structural Engineering, 144(7), 04018068.. doi: 10.1061/(ASCE)ST.1943-541X.0002061

Georgoulas, A., Koukouvinis, P., Gavaises, M. and Marengo, M. (2015). Numerical investigation of quasi-static bubble growth and detachment from submerged orifices in isothermal liquid pools: The effect of varying fluid properties and gravity levels. International Journal of Multiphase Flow, 74, pp. 59-78. doi: 10.1016/j.ijmultiphaseflow.2015.04.008

Ghosh, S. and Rahman, B. M. (2017). A Compact Mach-Zehnder Interferometer Using Composite Plasmonic Waveguide for Ethanol Vapor Sensing. Journal of Lightwave Technology, 35(14), pp. 3003-3011. doi: 10.1109/JLT.2017.2703827

Ghosh, S. and Rahman, B. M. ORCID: 0000-0001-6384-0961 (2018). Evolution of Plasmonic Modes in a Metal Nano-Wire Studied by a Modified Finite Element Method. Journal of Lightwave Technology, 36(3), pp. 809-818. doi: 10.1109/JLT.2017.2782710

Ghosh, S. and Rahman, B. M. (2016). An Innovative Straight Resonator Incorporating a Vertical Slot as an Efficient Bio-Chemical Sensor. IEEE Journal on Selected Topics in Quantum Electronics, 23(2), doi: 10.1109/JSTQE.2016.2630299

Ghosh Ray, I., Rahulamathavan, Y. and Rajarajan, M. (2018). A New Lightweight Symmetric Searchable Encryption Scheme for String Identification. IEEE Transactions on Cloud Computing, doi: 10.1109/TCC.2018.2820014

Giaralis, A. and Petrini, F. (2017). Optimum design of the tuned mass-damper-inerter for serviceability limit state performance in wind-excited tall buildings. Procedia Engineering, 199, pp. 1773-1778. doi: 10.1016/j.proeng.2017.09.453

Giaralis, A. and Petrini, F. (2017). Wind-induced vibration mitigation in tall buildings using the tuned mass-damper-inerter (TMDI). Journal of Structural Engineering, 143(9), doi: 10.1061/(ASCE)ST.1943-541X.0001863

Giaralis, A. and Spanos, P. D. (2012). Derivation of response spectrum compatible non-stationary stochastic processes relying on Monte Carlo-based peak factor estimation. Earthquakes and Structures, 3(3), pp. 581-609.

Giaralis, A. and Spanos, P. D. (2010). Effective linear damping and stiffness coefficients of nonlinear systems for design spectrum based analysis. Soil Dynamics and Earthquake Engineering, 30(9), pp. 798-810. doi: 10.1016/j.soildyn.2010.01.012

Giaralis, A. and Spanos, P. D. (2009). Wavelet-based response spectrum compatible synthesis of accelerograms-Eurocode application (EC8). Soil Dynamics and Earthquake Engineering, 29(1), pp. 219-235. doi: 10.1016/j.soildyn.2007.12.002

Giaralis, A. and Taflanidis, A. A. (2018). Optimal tuned mass-damper-inerter (TMDI) design for seismically excited MDOF structures with model uncertainties based on reliability criteria. Structural Control & Health Monitoring, 25(2), doi: 10.1002/stc.2082

Gkatzogias, K.I. and Kappos, A. J. (2015). Deformation-based seismic design of concrete bridges. Earthquakes and Structures, 9(5), pp. 1045-1067. doi: 10.12989/eas.2015.9.5.1045

Gkatzogias, K.I. and Kappos, A. J. (2016). Semi-Active Control Systems in Bridge Engineering: A Review of the Current State of Practice. Structural Engineering International, 26(4), pp. 290-301. doi: 10.2749/101686616X14555429844040

Gkoktsi, K. and Giaralis, A. (2017). Assessment of sub-Nyquist deterministic and random data sampling techniques for operational modal analysis. Structural Health Monitoring, 16(5), pp. 630-646. doi: 10.1177/1475921717725029

Gkoktsi, K. and Giaralis, A. (2015). Effect of frequency domain attributes of wavelet analysis filter banks for structural damage localization using the relative wavelet entropy index. International Journal of Sustainable Materials and Structural Systems, 2(1-2), pp. 134-160. doi: 10.1504/IJSMSS.2015.078365

Glackin, C., Chollet, G., Dugan, N., Cannings, N., Wall, J., Tahir, S. F., Ray, I. G. and Rajarajan, M. (2017). Privacy preserving encrypted phonetic search of speech data. 2017 IEEE International Conference on Acoustics, Speech and Signal Processing - Proceedings, pp. 6414-6418. doi: 10.1109/ICASSP.2017.7953391

Glover, I., Campbell, A., Latif, F., Norris, L., Toner, J. and Tse, C. (2012). A tale of one city: intra-institutional variations in migrating VLE platform. Research in Learning Technology, 20, doi: 10.3402/rlt.v20i0.19190

Gong, P., Chen, T. and Xu, Q. (2015). ETARP: An Energy Efficient Trust-Aware Routing Protocol for Wireless Sensor Networks. Journal of Sensors, 2015, p. 469793. doi: 10.1155/2015/469793

Gong, P., Xu, Q. and Chen, T. (2014). Energy Harvesting Aware routing protocol for wireless sensor networks. 2014 9th International Symposium on Communication Systems, Networks and Digital Signal Processing (CSNDSP), pp. 171-176. doi: 10.1109/CSNDSP.2014.6923819

Gonschior, C. P., Klein, K.-F., Heyse, D., Baumann, S., Sun, T. and Grattan, K. T. V. (2013). High power 405 nm diode laser fiber-coupled single-mode system with high long-term stability. Proceedings of SPIE - The International Society for Optical Engineering, 8605, doi: 10.1117/12.2003888

Gonschior, C. P., Klein, K.-F., Sun, T. and Grattan, K. T. V. (2013). Generation of periodic surface structures on silica fibre surfaces using 405 nm CW diode lasers. Journal of Non-Crystalline Solids, 361(1), pp. 106-110. doi: 10.1016/j.jnoncrysol.2012.11.004

Goodey, R.J., Brown, C. J. and Rotter, J. M. (2017). Rectangular steel silos: Finite element predictions of filling wall pressures. Engineering Structures, 132, pp. 61-69. doi: 10.1016/j.engstruct.2016.11.023

Gorasia, R. J., McNamara, A. M. and Rettura, D. (2012). Reducing driving forces for pressed-in piles. Proceedings of the Institution of Civil Engineers - Geotechnical Engineering, 167(1), pp. 19-27. doi: 10.1680/geng.11.00084

Gourlay, C. M., O'Sullivan, C., Fonseca, J., Yuan, L., Kareh, K., Nagira, T. and Yasuda, H. (2014). Synchrotron radiography studies of shear-induced dilation in semi-solid Al alloys and steels. JOM: Journal of the Minerals, Metals and Materials Society, 66(8), pp. 1415-1424. doi: 10.1007/s11837-014-1029-5

Gowree, E. R. and Atkin, C. J. (2017). Measurement and modelling of the turbulent boundary layer near the attachment line of a swept wing. Aeronautical Journal, 121(1240), pp. 746-769. doi: 10.1017/aer.2017.30

Gowree, E. R., Atkin, C. J. and Gruppetta, S. (2015). A simple digital-optical system to improve accuracy of hot-wire measurements. MEASUREMENT SCIENCE and TECHNOLOGY, 26(9),

Gowree, E. R. ORCID: 0000-0001-5834-3020, Jagadeesh, C., Talboys, E., Lageman, C. and Bruecker, C. ORCID: 0000-0001-5834-3020 (2018). Vortices enable the complex aerobatics of peregrine falcons. Communications Biology, 1, 27.. doi: 10.1038/s42003-018-0029-3

Gowreesunker, B. L., Stankovic, S. B., Tassou, S. A. and Kyriacou, P. A. (2013). Experimental and numerical investigations of the optical and thermal aspects of a PCM-glazed unit. Energy and Buildings, 61, pp. 239-249. doi: 10.1016/j.enbuild.2013.02.032

Granados-Cruz, M., Shmaliy, Y. S., Khan, S., Ahn, C. K. and Zhao, S. (2015). New results in nonlinear state estimation using extended unbiased fir filtering. 2015 23rd European Signal Processing Conference (EUSIPCO), pp. 679-683. doi: 10.1109/EUSIPCO.2015.7362469

Grandal Gonzalez, T., Zornoza, A., Fraga, S., Castro, G., Sun, T. and Grattan, K. T. V. (2018). Laser Cladding-based metallic embedding technique for fiber optic sensors. Journal of Lightwave Technology, 36(4), pp. 1018-1025. doi: 10.1109/JLT.2017.2748962

Grattan, K. T. V., Agrawal, A., Kejalakshmy, N. and Rahman, B. M. (2009). Soft Glass Equiangular Spiral Photonic Crystal Fiber for Supercontinuum Generation. IEEE Photonics Technology Letters, 21(22), pp. 1722-1724. doi: 10.1109/LPT.2009.2032523

Grattan, K. T. V., Sun, T. and Khan, S. (2013). Ludwik Finkelstein and measurement - A challenge for the future. Measurement, 46(8), pp. 2990-2992. doi: 10.1016/j.measurement.2013.04.053

Green, R., Simoes, F. A., Reyes-Aldasoro, C. C., Rossor, A. M., Scoto, M., Barri, M., Greensmith, L., Muntoni, F., Reilly, M. M. and Hafezparast, M. (2016). A DYNC1H1 mutation in autosomal dominant spinal muscular atrophy shows the potential of pharmacological inhibition of histone deacetylase 6 as a treatment for disease associated cellular phenotypes. Journal Of The Peripheral Nervous System, 21(3), pp. 261-262. doi: 10.1111/jns.12181

Gruber, J. K., Jahromizadeh, S., Prodanovic, M. and Rakocevic, V. (2014). Application-oriented modelling of domestic energy demand. International Journal of Electrical Power & Energy Systems, 61, pp. 656-664. doi: 10.1016/j.ijepes.2014.04.008

Guan, W., He, J., Tang, Z. and Chen, T. (2013). Design and Evaluation of a Framework for Cooperative and Adaptive QoS Control of DSRC Network for Road Safety Applications. International Journal of Distributed Sensor Networks, 2013(946931), pp. 1-10. doi: 10.1155/2013/946931

Guo, L., Gao, S., Fu, F. and Wang, Y. (2013). Experimental study and numerical analysis of progressive collapse resistance of composite frames. Journal of Constructional Steel Research, 89, pp. 236-251. doi: 10.1016/j.jcsr.2013.07.006

Guo, Z., Ma, Q. and Qin, H. (2018). A time-domain Green's function for interaction betweenwaterwaves and floating bodies with viscous dissipation effects. Water, 10(1), doi: 10.3390/w10010072

Habib, K., Jiang, W., Rahman, B. M. and Grattan, K. T. V. (2017). Energy efficiency of iron-boron-silicon metallic glasses in sulfuric acid solutions. Materials Research Express, 4(3), 035201.. doi: 10.1088/2053-1591/aa60dc

Hada, S. L. and Rahman, B. M. (2016). Rigorous analysis of numerical methods: a comparative study. Optical and Quantum Electronics, 48(6), 309.. doi: 10.1007/s11082-016-0579-x

Hadjichrysanthou, C. and Broom, M. (2012). When should animals share food? Game theory applied to kleptoparasitic populations with food sharing. Behavioral Ecology, 23(5), pp. 977-991. doi: 10.1093/beheco/ars061

Halikias, G. (2014). Strong stability and the Cayley transform. Mathematical Methods in the Applied Sciences, 37(2), pp. 212-216. doi: 10.1002/mma.2976

Halikias, G., Dritsas, L., Pantelous, A. and Tsoulkas, V. (2012). Strong stability of discrete-time systems. Linear Algebra and its Applications, 436(7), pp. 1890-1908. doi: 10.1016/j.laa.2011.09.024

Halikias, G., Galanis, G., Karcanias, N. and Milonidis, E. (2013). Nearest common root of polynomials, approximate greatest common divisor and the structured singular value. IMA Journal of Mathematical Control and Information, 30(4), pp. 423-442. doi: 10.1093/imamci/dns032

Halikias, G. ORCID: 0000-0003-1260-1383, Karcanias, N. ORCID: 0000-0002-1889-6314 and Papageorgiou, A. (2013). The distance to strong stability. Linear Algebra and its Applications, 439(10), pp. 2721-2735. doi: 10.1016/j.laa.2013.09.003

Halikias, G., Papageorgiou, A. and Karcanias, N. (2010). Non-overshooting stabilisation via state and output feedback. INTERNATIONAL JOURNAL OF CONTROL, 83(6), pp. 1232-1247. doi: 10.1080/00207171003664844

Halikias, G., Tsoulkas, V., Pantelous, A. and Milonidis, E. (2010). Hankel-norm approximation of FIR filters: a descriptor-systems based approach. International Journal of Control, 83(9), pp. 1858-1867. doi: 10.1080/00207179.2010.498059

Hamadi, D., Ayoub, A. and Abdelhafid, O. (2016). A new flat shell finite element for the linear analysis of thin shell structures. European Journal of Computational Mechanics, 24(6), pp. 232-255. doi: 10.1080/17797179.2016.1153401

Hamadi, D., Ayoub, A. and Maalem, T. (2016). A new strain-based finite element for plane elasticity problems. Engineering Computations, 33(2), pp. 562-579. doi: 10.1108/EC-09-2014-0181

Hanjalic, K. and Stosic, N. (1978). Some aspects of laboratory testing and computer modelling of two-stage compressors with inter and after-cooling. Proceedings of the IMechE Conference on Design and Operarion of Industrial Compressors, pp. 11-19.

He, J., Tang, Z., O'Farrell, T. and Chen, T. (2011). Performance analysis of DSRC priority mechanism for road safety applications in vehicular networks. Wireless Communications and Mobile Computing, 11(7), pp. 980-990. doi: 10.1002/wcm.821

He, Y., Jejjala, V., Matti, C., Nelson, B. D. and Stillman, M. (2015). The Geometry of Generations. Communications in Mathematical Physics, 339(1), pp. 149-190. doi: 10.1007/s00220-015-2416-7

He, Y., Wu, W., Zhao, G., Liu, Y. and Li, Y. (2008). Poly(3,6-dihexyl-thieno[3,2-b]thiophene vinylene): Synthesis, Field-Effect Transistors, and Photovoltaic Properties. Macromolecules, 41(24), pp. 9760-9766. doi: 10.1021/ma801923c

Henry, K. M., Pase, L., Ramos-Lopez, C. F., Lieschke, G. J., Renshaw, S. A. and Reyes-Aldasoro, C. C. (2013). PhagoSight: an open-source MATLAB® package for the analysis of fluorescent neutrophil and macrophage migration in a zebrafish model. PLoS One, 8(8), e72636. doi: 10.1371/journal.pone.0072636

Hessami, A. G. and Karcanias, N. (2011). Complexity, Emergence and the Challenges of Assurance: The Need for a Systems Paradigm. IEEE Aerospace and Electronic Systems Magazine, 26(2), pp. 34-41. doi: 10.1109/MAES.2011.5739488

Hickey, M. and Kyriacou, P. A. (2007). Optimal spacing between transmitting and receiving optical fibres in reflectance pulse oximetry. Journal of Physics: Conference Series, 85, 012030.

Hickey, M., Phillips, J. P. and Kyriacou, P. A. (2016). Investigation of peripheral photoplethysmographic morphology changes induced during a hand-elevation study. Journal of Clinical Monitoring and Computing, 30(5), pp. 727-736. doi: 10.1007/s10877-015-9761-0

Hickey, M., Phillips, J. P. and Kyriacou, P. A. (2015). Venous pooling and drainage affects photoplethysmographic signals at different vertical hand positions. Optical Diagnostics and Sensing XV: Toward Point-of-Care Diagnostics, 9332, 93320I. doi: 10.1117/12.2076732

Hickey, M., Samuels, N., Randive, N., Langford, R. M. and Kyriacou, P. A. (2009). In-Vivo Evaluation of a Fiber-Optic Splanchnic Photoplethysmographic Sensor during Open Laparotomy. Engineering in Medicine and Biology Society, 2009. EMBC 2009. Annual International Conference of the IEEE, pp. 1505-1508. doi: 10.1109/IEMBS.2009.5334159

Hickey, M., Samuels, N., Randive, N., Langford, R. M. and Kyriacou, P. A. (2011). Investigation of photoplethysmographic signals and blood oxygen saturation values obtained from human splanchnic organs using a fiber optic sensor. Journal of Clinical Monitoring and Computing, 25(4), e245. doi: 10.1007/s10877-011-9302-4

Hickey, M., Samuels, N., Randive, N., Langford, R. M. and Kyriacou, P. A. (2010). Measurement of splanchnic photoplethysmographic signals using a new reflectance fiber optic sensor. Journal of Biomedical Optics, 15(2), e027012. doi: 10.1117/1.3374355

Holmes, G. R., Dixon, G., Anderson, S. R., Reyes-Aldasoro, C. C., Elks, P. M., Billings, S. A., Whyte, M., Kadirkamanathan, V. and Renshaw, S. A. (2012). Drift-Diffusion Analysis of Neutrophil Migration during Inflammation Resolution in a Zebrafish Model. Advances in Hematology, 2012, 792163 - ?. doi: 10.1155/2012/792163

Howey, D. A., Holmes, A. S. and Pullen, K. R. (2011). Measurement and CFD Prediction of Heat Transfer in Air-Cooled Disc-Type Electrical Machines. IEEE Transactions on Industry Applications, 47(4), pp. 1716-1723. doi: 10.1109/TIA.2011.2156371

Howey, D. A., Holmes, A. S. and Pullen, K. R. (2010). Radially resolved measurement of stator heat transfer in a rotor-stator disc system. International Journal of Heat and Mass Transfer, 53(1-3), pp. 491-501. doi: 10.1016/j.ijheatmasstransfer.2009.09.006

Hu, J., Kaparias, I. and Bell, M. G. H. (2009). Spatial econometrics models for congestion prediction with in-vehicle route guidance. IET Intelligent Transport Systems, 3(2), pp. 159-167. doi: 10.1049/iet-its:20070062

Huo, B. Y. and D'Mello, C. (2013). Push-out tests and analytical study of shear transfer mechanisms in composite shallow cellular floor beams. Journal of Constructional Steel Research, 88, pp. 191-205. doi: 10.1016/j.jcsr.2013.05.007

Huo, J., Zhang, J., Liu, Y. and Fu, F. (2017). Dynamic Behaviour and Catenary Action of Axially-restrained Steel Beam Under Impact Loading. Structures, doi: 10.1016/j.istruc.2017.04.005

Idrees, F., Rajarajan, M., Conti, M., Chen, T. and Rahulamathavan, Y. (2017). PIndroid: A novel Android malware detection system using ensemble learning methods. Computers and Security, 68, pp. 36-46. doi: 10.1016/j.cose.2017.03.011

Ioannou, E. and Sayma, A. I. (2017). Full Annulus Numerical Study of Hot Streaks Propagation in a Hydrogen-rich Syngas-Fired Heavy Duty Axial Turbine. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 231(5), pp. 344-356. doi: 10.1177/0957650917706861

Iqbal, S., Zhang, L., Fu, X., Su, D., Zhou, H., Wu, W. ORCID: 0000-0003-1462-6402 and Zhang, T. (2018). Highly-efficient low cost anisotropic wet etching of silicon wafers for solar cells application. AIP Advances, 8(2), 025223.. doi: 10.1063/1.5012125

Ison, S. and Kaparias, I. (2016). Universities' Transport Study Group UK Annual Conference 2015. Transportation Planning and Technology, 39(1), pp. 1-2. doi: 10.1080/03081060.2015.1113664

Jadidbonab, H., Mitroglou, N. ORCID: 0000-0002-2955-8716, Karathanassis, I. K. ORCID: 0000-0001-9025-2866 and Gavaises, M. ORCID: 0000-0003-0874-8534 (2018). Experimental Study of Diesel-Fuel Droplet Impact on a Similarly Sized Polished Spherical Heated Solid Particle. Langmuir, 34(1), pp. 36-49. doi: 10.1021/acs.langmuir.7b01658

Jagadeesh, C., Gowree, E. R., Jadidbonab, H. and Atkin, C. J. ORCID: 0000-0003-2529-1978 (2018). On the temporal analysis of acoustic waves using schlieren imaging. Measurement, 116, pp. 507-513. doi: 10.1016/j.measurement.2017.11.018

Jahromizadeh, S. and Rakocevic, V. (2014). Joint rate control and scheduling for providing bounded delay with high efficiency in multihop wireless networks. IEEE/ACM Transactions on Networking, 22(5), pp. 1686-1698. doi: 10.1109/TNET.2013.2282872

Javdani, S., Fabian, M., Ams, M., Carlton, J., Sun, T. and Grattan, K. T. V. (2014). Fiber bragg grating-based system for 2-D analysis of vibrational modes of a steel propeller blade. Journal of Lightwave Technology, 32(23), pp. 3991-3997. doi: 10.1109/JLT.2014.2361631

Javdani, S., Fabian, M., Carlton, J., Sun, T. and Grattan, K. T. V. (2016). Underwater free-vibration analysis of full-scale marine propeller using a Fibre Bragg Grating-based sensor system. IEEE Sensors Journal, 16(4), pp. 946-953. doi: 10.1109/JSEN.2015.2490478

Jawaid, M. M., Rajani, R., Liatsis, P., Reyes-Aldasoro, C. C. and Slabaugh, G. G. (2017). A Hybrid Energy Model for Region Based Curve Evolution - Application to CTA Coronary Segmentation. Computer Methods and Programs in Biomedicine, doi: 10.1016/j.cmpb.2017.03.020

Jawaid, M. M., Riaz, A., Rajani, R., Reyes-Aldasoro, C. C. and Slabaugh, G. G. (2017). Framework for Detection and Localization of Coronary Non-Calcified Plaques in Cardiac CTA using Mean Radial Profiles. Computers in Biology and Medicine, 89, pp. 84-95. doi: 10.1016/j.compbiomed.2017.07.021

Jiang, H., Chen, W., Zhang, Q. and He, L. (2015). Analytical-Solution Based Corner Correction for Transient Thermal Measurement. Journal of Heat Transfer, 137(11), HT-14. doi: 10.1115/1.4030980

Jiang, H., He, L., Zhang, Q. and Wang, L. (2018). On scaling method to investigate high-speed over-tip-leakage flow at low-speed condition. Journal of Engineering for Gas Turbines and Power, 140(6), 062605.. doi: 10.1115/1.4038619

Jiang, W., Kohli, N., Sun, X. and Rahman, B. M. (2016). Multi-Poly-Silicon-Layer-Based Spot-Size Converter for Efficient Coupling Between Silicon Waveguide and Standard Single-Mode Fiber. IEEE Photonics Journal, 8(3), doi: 10.1109/JPHOT.2016.2577594

Jiang, W., Sun, X. and Rahman, B. M. (2017). Compact and fabrication-tolerant polarization splitter based on horizontal triple-slot waveguide. Applied Optics, 56(8), pp. 2119-2126. doi: 10.1364/AO.56.002119

Jones, W. P., Marquis, A. J. and Vogiatzaki, K. (2014). Large-eddy simulation of spray combustion in a gas turbine combustor. Combustion and Flame, 161(1), pp. 222-239. doi: 10.1016/j.combustflame.2013.07.016

Kabir, I. R., Yin, D. and Naher, S. ORCID: 0000-0003-2047-5807 (2017). 3D Thermal Model of Laser Surface Glazing for H13 Tool Steel. AIP Conference Proceedings, 1896, 130003.. doi: 10.1063/1.5008152

Kabir, I. R., Yin, D. and Naher, S. (2016). Two dimensional finite element thermal model of laser surface glazing for H13 tool steel. AIP Conference Proceedings, 1769(1), p. 110003. doi: 10.1063/1.4963512

Kabir, I. R., Yin, D., Tamanna, N. and Naher, S. ORCID: 0000-0003-2047-5807 (2018). Thermomechanical modelling of laser surface glazing for H13 tool steel. Applied Physics A: Materials Science & Processing, 124(3), doi: 10.1007/s00339-018-1671-9

Kabir, S., Rahman, B. M., Agrawal, A. and Grattan, K. T. V. (2013). Elimination of numerical dispersion from electromagnetic time domain analysis by using resource efficient finite element technique. Progress in Electromagnetics Research, 137, pp. 487-512. doi: 10.2528/PIER13012305

Kadirkamanathan, V., Anderson, S. R., Billings, S. A., Zhang, X., Holmes, G. R., Reyes-Aldasoro, C. C., Elks, P. M. and Renshaw, S. A. (2012). The neutrophil's eye-view: inference and visualisation of the chemoattractant field driving cell chemotaxis in vivo. PLoS One, 7(4), e35182 -. doi: 10.1371/journal.pone.0035182

Kamps, L., Geyer, T. F., Sarradj, E. and Brücker, C. (2017). Vortex shedding noise of a cylinder with hairy flaps. Journal of Sound and Vibration, 388, pp. 69-84. doi: 10.1016/j.jsv.2016.10.039

Kantartzis, P., Abdi, M. and Liatsis, P. (2013). Stimulation and measurement patterns versus prior information for fast 3D EIT: A breast screening case study. Signal Processing, 93(10), pp. 2838-2850. doi: 10.1016/j.sigpro.2012.06.027

Kanthou, C., Dachs, G. U., Lefley, D. V., Steele, A. J., Coralli-Foxon, C., Harris, S., Greco, O., Dos Santos, S. A., Reyes-Aldasoro, C. C., English, W. R. and Tozer, G. M. (2014). Tumour cells expressing single VEGF isoforms display distinct growth, survival and migration characteristics. PLoS One, 9(8), e104015 - ?. doi: 10.1371/journal.pone.0104015

Kaparias, I. and Bell, M. G. H. (2009). Testing a reliable in-vehicle navigation algorithm in the field. IET Intelligent Transport Systems, 3(3), pp. 314-324. doi: 10.1049/iet-its.2008.0075

Kaparias, I., Bell, M. G. H. and Belzner, H. (2008). A new measure of travel time reliability for in-vehicle navigation systems. Journal of Intelligent Transportation Systems: Technology, Planning, and Operations, 12(4), pp. 202-211. doi: 10.1080/15472450802448237

Kaparias, I., Bell, M. G. H., Biagioli, T., Bellezza, L. and Mount, B. (2015). Behavioural analysis of interactions between pedestrians and vehicles in street designs with elements of shared space. Transportation Research Part F: Traffic Psychology and Behaviour, 30, pp. 115-127. doi: 10.1016/j.trf.2015.02.009

Kaparias, I., Bell, M. G. H., Bogenberger, K. and Chen, Y. (2007). An approach to time dependence and reliability in dynamic route guidance. Transportation Research Record, 2039, pp. 32-41. doi: 10.3141/2039-04

Kaparias, I., Bell, M. G. H., Chen, Y. and Bogenberger, K. (2007). ICNavS: A tool for reliable dynamic route guidance. IET Intelligent Transport Systems, 1(4), pp. 225-233. doi: 10.1049/iet-its:20060066

Kaparias, I., Bell, M. G. H., Dong, W., Sastrawinata, A., Singh, A., Wang, X. and Mount, B. (2013). Analysis of pedestrian-vehicle traffic conflicts in street designs with elements of shared space. Transportation Research Record, 2393, pp. 21-30. doi: 10.3141/2393-03

Kaparias, I., Bell, M. G. H., Greensted, J., Cheng, S., Miri, A., Taylor, C. and Mount, B. (2010). Development and implementation of a vehicle-pedestrian conflict analysis method: Adaptation of a vehicle-vehicle technique. Transportation Research Record, 2198, pp. 75-82. doi: 10.3141/2198-09

Kaparias, I., Bell, M. G. H., Miri, A., Chan, C. and Mount, B. (2012). Analysing the perceptions of pedestrians and drivers to shared space. Transportation Research Part F: Traffic Psychology and Behaviour, 15(3), pp. 297-310. doi: 10.1016/j.trf.2012.02.001

Kappos, A. J. (2015). Performance-Based Seismic Design and Assessment of Bridges. Perspectives on European Earthquake Engineering and Seismology, 39, pp. 163-205. doi: 10.1007/978-3-319-16964-4_7

Kappos, A. J. (2016). An overview of the development of the hybrid method for seismic vulnerability assessment of buildings. Structure and Infrastructure Engineering, 12(12), pp. 1573-1584. doi: 10.1080/15732479.2016.1151448

Kappos, A. J., Gidaris, I.G. and Gkatzogias, K.I. (2012). Problems associated with direct displacement-based design of concrete bridges with single-column piers, and some suggested improvements. Bulletin of Earthquake Engineering, 10(4), pp. 1237-1266. doi: 10.1007/s10518-012-9354-y

Kappos, A. J., Panagopoulos, G., Sextos, A., Papanikolaou, V.K. and Stylianidis, K. C. (2010). Development of comprehensive earthquake loss scenarios for a Greek and a Turkish city - structural aspects. Earthquakes and Structures, 1(2), pp. 197-214. doi: 10.12989/eas.2010.1.2.197

Kappos, A. J. and Papanikolaou, V.K. (2016). Nonlinear dynamic analysis of masonry buildings and definition of seismic damage states. Open Construction and Building Technology Journal, 10(Sup 2), pp. 192-209. doi: 10.2174/1874836801610010192

Kappos, A. J., Paraskeva, T. S. and Moschonas, I. F. (2013). Response Modification Factors for Concrete Bridges in Europe. Journal of Bridge Engineering, 18(12), pp. 1328-1335. doi: 10.1061/(ASCE)BE.1943-5592.0000487

Karabag, C., Jones, M. L., Peddie, C. J., Weston, A. E., Collinson, L. M. and Reyes-Aldasoro, C. C. ORCID: 0000-0002-9466-2018 (2018). Automated Segmentation of HeLa Nuclear Envelope from Electron Microscopy Images. Communications in Computer and Information Science, doi: 10.1007/978-3-319-95921-4_23

Karathanassis, I. K., Koukouvinis, P. and Gavaises, M. (2017). Comparative evaluation of phase-change mechanisms for the prediction of flashing flows. International Journal of Multiphase Flow, 95, pp. 257-270. doi: 10.1016/j.ijmultiphaseflow.2017.06.006

Karathanassis, I. K., Koukouvinis, P. and Gavaises, M. (2016). Topology and distinct features of flashing flow in an injector nozzle. Atomization and Sprays, 26(12), pp. 1307-1336. doi: 10.1615/AtomizSpr.2016016510

Karathanassis, I. K. ORCID: 0000-0001-9025-2866, Koukouvinis, P. ORCID: 0000-0002-3945-3707, Kontolatis, E., Lee, Z, Wang, J, Mitroglou, N. ORCID: 0000-0002-2955-8716 and Gavaises, M. ORCID: 0000-0003-0874-8534 (2018). High-speed visualization of vortical cavitation using synchrotron radiation. Journal of Fluid Mechanics, 838, pp. 148-164. doi: 10.1017/jfm.2017.885

Karathanassis, I. K., Papanicolaou, E., Belessiotis, V. and Bergeles, G. (2017). Design and experimental evaluation of a parabolic-trough concentrating photovoltaic/thermal (CPVT) system with high-efficiency cooling. Renewable Energy, 101, pp. 467-483. doi: 10.1016/j.renene.2016.09.013

Karathanassis, I. K., Papanicolaou, E., Belessiotis, V. and Bergeles, G. (2013). Effect of secondary flows due to buoyancy and contraction on heat transfer in a two-section plate-fin heat sink. International Journal of Heat and Mass Transfer, 61(1), pp. 583-597. doi: 10.1016/j.ijheatmasstransfer.2013.02.028

Karathanassis, I. K., Papanicolaou, E., Belessiotis, V. and Bergeles, G. (2015). Experimental and numerical evaluation of an elongated plate-fin heat sink with three sections of stepwise varying channel width. International Journal of Heat and Mass Transfer, 84, pp. 16-34. doi: 10.1016/j.ijheatmasstransfer.2014.12.013

Karathanassis, I. K., Papanicolaou, E., Belessiotis, V. and Bergeles, G. (2014). Flow and Temperature Fields in Cooling Devices with Embedded Serpentine Tubes. Numerical Heat Transfer, Part A: Applications, 66(4), pp. 349-378. doi: 10.1080/10407782.2014.884864

Karathanassis, I. K., Papanicolaou, E., Belessiotis, V. and Bergeles, G. (2013). Multi-objective design optimization of a micro heat sink for Concentrating Photovoltaic/Thermal (CPVT) systems using a genetic algorithm. Applied Thermal Engineering, 59(1), pp. 733-744. doi: 10.1016/j.applthermaleng.2012.06.034

Karathanassis, I. K., Papanicolaou, E., Belessiotis, V. and Bergeles, G. (2013). Three-dimensional flow effects on forced convection heat transfer in a channel with stepwise-varying width. International Journal of Thermal Sciences, 67, pp. 177-191. doi: 10.1016/j.ijthermalsci.2012.12.016

Karcanias, N. (2013). Generalised resultants, dynamic polynomial combinants and the minimal design problem. International Journal of Control, 86(11), pp. 1946-1964. doi: 10.1080/00207179.2013.791402

Karcanias, N. (2013). Geometric and algebraic properties of minimal bases of singular systems. International Journal of Control, 86(11), pp. 1924-1945. doi: 10.1080/00207179.2013.816869

Karcanias, N. (2013). Properties and Classification of Generalized Resultants and Polynomial Combinants. 2013 21st Mediterranean Conference on Control & Automation (MED), pp. 788-793. doi: 10.1109/MED.2013.6608813

Karcanias, N. (2008). Structure evolving systems and control in integrated design. Annual Reviews in Control, 32(2), pp. 161-182. doi: 10.1016/j.arcontrol.2008.07.004

Karcanias, N. (2013). Systems of Systems: A Control Theoretic View. 2013 IEEE International Conference on Systems, Man, and Cybernetics (SMC),, pp. 1732-1737. doi: 10.1109/SMC.2013.298

Karcanias, N. and Halikias, G. (2013). Approximate zero polynomials of polynomial matrices and linear systems. Linear Algebra and its Applications, 439(4), pp. 1091-1103. doi: 10.1016/j.laa.2012.12.027

Karcanias, N. and Halikias, G. (2011). Approximate zero polynomials of polynomial matrices and linear systems. 2011 50th IEEE Conference on Decision and Control and European Control Conference, pp. 465-470. doi: 10.1109/CDC.2011.6160302

Karcanias, N., Halikias, G. and Papageorgiou, A. (2010). Strong stability of internal system descriptions. INTERNATIONAL JOURNAL OF CONTROL, 83(1), pp. 182-205. doi: 10.1080/00207170903124669

Karcanias, N. and Leventides, J. (2016). Solution of the determinantal assignment problem using the Grassmann matrices. International Journal of Control, 89(2), pp. 352-367. doi: 10.1080/00207179.2015.1077525

Karcanias, N., Leventides, J. and Livada, M. (2014). Matrix pencil representation of structural transformations of passive electrical networks. 6th International Symposium on Communications, Control and Signal Processing (ISCCSP), pp. 416-420. doi: 10.1109/ISCCSP.2014.6877902

Karcanias, N., Leventides, J. and Meintanis, I. (2013). Parameterisation of degenerate solutions of the determinantal assignment problem. System, Structure and Control, 5(1), pp. 516-521. doi: 10.3182/20130204-3-FR-2033.00100

Karcanias, N., Leventides, J., Milonidis, E. and Meintanis, I. (2016). Selection of Decentralised Control Structures: Structural Methodologies and Diagnostics. IFAC PapersOnLine, 49(9), pp. 80-85. doi: 10.1016/j.ifacol.2016.07.498

Karcanias, N. and Limebeeer, D. J. N. (2013). Special Issue dedicated to Sir Alistair G. J. MacFarlane. International Journal of Control, 86(11), pp. 1899-1902. doi: 10.1080/00207179.2013.858831

Karcanias, N. ORCID: 0000-0002-1889-6314, Livada, M. and Leventides, J. (2017). System Properties of Implicit Passive Electrical Networks Descriptions. IFAC-PapersOnLine, 50(1), pp. 9242-9247. doi: 10.1016/j.ifacol.2017.08.1285

Karcanias, N., Meintanis, I. and Leventides, J. (2016). Selection of Decentralised Schemes and Parametrisation of the Decentralised Degenerate Compensators. IFAC PaperOnLine, 49(9), pp. 74-79. doi: 10.1016/j.ifacol.2016.07.497

Karcanias, N., Meintanis, I. and Leventides, J. (2016). System Degeneracy and the Output Feedback Problem: Parametrisation of the Family of Degenerate Compensators. IFAC PapersOnLine, 49(9), pp. 68-73. doi: 10.1016/j.ifacol.2016.07.496

Karcanias, N. and Vafiadis, D. (2012). Disturbance and Input-Output Decoupling of Systems. Automatica, 48(8), pp. 1650-1657. doi: 10.1016/j.automatica.2012.05.021

Karim, M. R., Ahmad, H. and Rahman, B. M. (2017). All-Normal Dispersion Chalcogenide PCF for Ultraflat Mid-Infrared Supercontinuum Generation. IEEE Photonics Technology Letters, 29(21), pp. 1792-1795. doi: 10.1109/LPT.2017.2752214

Karim, M. R., Ahmad, H. and Rahman, B. M. (2017). All-Normal-Dispersion Chalcogenide Waveguides for Ultraflat Supercontinuum Generation in the Mid-Infrared Region. IEEE Journal of Quantum Electronics, 53(2), 7100106.. doi: 10.1109/JQE.2017.2677380

Karim, M. R., Ahmad, H. and Rahman, B. M. ORCID: 0000-0001-6384-0961 (2018). Design and modeling of dispersion-engineered all-chalcogenide triangular-core fiber for mid-infrared-region supercontinuum generation. Journal of the Optical Society of America B: Optical Physics (JOSA B), 35(2), pp. 266-275. doi: 10.1364/JOSAB.35.000266

Karim, M. R. and Rahman, B. M. (2016). Ultra-broadband mid-infrared supercontinuum generation using chalcogenide rib waveguide. Optical and Quantum Electronics, 48(3), doi: 10.1007/s11082-016-0458-5

Karim, M. R., Rahman, B. M. and Agrawal, G. P. (2015). Mid-infrared supercontinuum generation using dispersion-engineered Ge11.5As24Se64.5 chalcogenide channel waveguide. Optics Express, 23(5), pp. 6903-6914. doi: 10.1364/OE.23.006903

Karim, M. R., Rahman, B. M., Azabi, Y. O., Agrawal, A. and Agrawal, G. P. (2015). Ultra-broadband mid-infrared supercontinuum generation through dispersion engineering of chalcogenide microstructured fibers. Journal of the Optical Society of America B, 32(11), pp. 2343-2351. doi: 10.1364/JOSAB.32.002343

Karim, M.R, Rahman, B. M. and Agrawal, G. P. (2014). Dispersion engineered Ge11.5As24Se64.5 nanowire for supercontinuum generation: A parametric study. Optics Express, 22(25), pp. 31029-31040. doi: 10.1364/OE.22.031029

Karimi, M., Surre, F., Sun, T., Grattan, K. T. V., Margulis, W. and Fonjallaz, P. (2011). Directional Force Measurement Using Specialized Single-Mode Polarization-Maintaining Fibers. Journal of Lightwave Technology, 29(24), pp. 3611-3615. doi: 10.1109/JLT.2011.2167011

Karvounis, A., Ou, J.Y., Wu, W., MacDonald, K.F. and Zheludev, N.I. (2015). Nano-optomechanical nonlinear dielectric metamaterials. Applied Physics Letters, 107(19), doi: 10.1063/1.4935795

Kassanos, P., Constantinou, L., Triantis, I. and Demosthenous, A. (2014). An Integrated Analog Readout for Multi-Frequency Bioimpedance Measurements. IEEE Sensors Journal, 14(8), pp. 2792-2800. doi: 10.1109/JSEN.2014.2315963

Kassanos, P., Triantis, I. and Demosthenous, A. (2013). A CMOS Magnitude/Phase Measurement Chip for Impedance Spectroscopy. IEEE Sensors Journal, 13(6), pp. 2229-2236. doi: 10.1109/JSEN.2013.2251628

Kather, J. N., Berghoff, A. S., Ferber, D., Suarez-Carmona, M., Reyes-Aldasoro, C. C. ORCID: 0000-0002-9466-2018, Valous, N. A., Rojas-Moraleda, R., Jäger, D. and Halama, N. (2018). Large-scale database mining reveals hidden trends and future directions for cancer immunotherapy. OncoImmunology, doi: 10.1080/2162402X.2018.1444412

Kather, J. N., Marx, A., Reyes-Aldasoro, C. C., Schad, L. R., Zöllner, F. G. and Weis, C. A. (2015). Continuous representation of tumor microvessel density and detection of angiogenic hotspots in histological whole-slide images. Oncotarget, 6(22), pp. 19163-19176. doi: 10.18632/oncotarget.4383

Kather, N. J., Weis, C. A., Zöllner, F. G. and Reyes-Aldasoro, C. C. (2016). Mapping tumour tissue: quantitative maps of histological whole slide images. Oncology News, 10(6), pp. 188-190.

Katritsis, D. G., Theodorakakos, A., Pantos, I., Andriotis, A., Efstathopoulos, E. P., Siontis, G., Karcanias, N., Redwood, S. and Gavaises, M. (2010). Vortex formation and recirculation zones in left anterior descending artery stenoses: computational fluid dynamics analysis. Physics in Medicine and Biology, 55(5), 1395-.. doi: 10.1088/0031-9155/55/5/009

Katritsis, D. G., Theodorakakos, A., Pantos, I., Gavaises, M., Karcanias, N. and Efstathopoulos, E. P. (2012). Flow Patterns at Stented Coronary Bifurcations Computational Fluid Dynamics Analysis. Circulation: Cardiovascular Interventions, 5(4), pp. 530-539. doi: 10.1161/CIRCINTERVENTIONS.112.968347

Kejalakshmy, N., Agrawal, A., Aden, Y., Leung, D. M., Rahman, B. M. and Grattan, K. T. V. (2010). Characterization of silicon nanowire by use of full-vectorial finite element method.. Applied Optics, 49(16), pp. 3173-3181. doi: 10.1364/AO.49.003173

Kejalakshmy, N., Grattan, K. T. V. and Rahman, B. M. (2015). Investigation of the Optical Modal Properties of Al+3 Doped ZnO-Coated Au Waveguide for Gas Sensing Applications Using the Finite Element Method. IEEE Sensors Journal, 16(5), pp. 1176-1181. doi: 10.1109/JSEN.2015.2498943

Kejalakshmy, N., Rahman, B. M., Agrawal, A., Tanvir, H. M. and Grattan, K. T. V. (2009). Metal-Coated Defect-Core Photonic Crystal Fiber for THz Propagation. IEEE/OSA Journal of Lightwave Technology, 27(11), pp. 1631-1637. doi: 10.1109/JLT.2009.2020919

Kerrouche, A., Boyle, W. J. O., Gebremichael, Y., Sun, T., Grattan, K. T. V., Taljsten, B. and Bennitz, A. (2008). Field tests of fibre Bragg grating sensors incorporated into CFRP for railway bridge strengthening condition monitoring. Sensors and Actuators A: Physical, 148(1), pp. 68-74. doi: 10.1016/j.sna.2008.07.014

Kerrouche, A., Boyle, W. J. O., Sun, T., Grattan, K. T. V., Schmidt, J. W. and Taljsten, B. (2009). Strain Measurement Using Embedded Fiber Bragg Grating Sensors Inside an Anchored Carbon Fiber Polymer Reinforcement Prestressing Rod for Structural Monitoring. IEEE Sensors Journal, 9(11), pp. 1456-1461. doi: 10.1109/JSEN.2009.2018355

Kewlani, G., Vogiatzaki, K., Shanbhogue, S. and Ghoniem, A. F. (2013). Validation study of large-eddy simulations of wake stabilized reacting flows using artificial flame thickening approaches. 51st AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition 2013, doi: 10.2514/6.2013-169

Khader, M. A. and Sayma, A. I. (2017). Effect of end-wall riblets on radial turbine performance. IOP Conference Series: Materials Science and Engineering, 232(012075), doi: 10.1088/1757-899X/232/1/012075

Khan, S. and Finkelstein, L. (2011). Mathematical modelling in measurement and instrumentation. Measurement and Control, 44(9), pp. 277-282. doi: 10.1177/002029401104400904

Khan, S. and Finkelstein, L. (2013). Mathematical modelling in the analysis and design of hard and soft measurement systems. Measurement, 46(8), pp. 2936-2941. doi: 10.1016/j.measurement.2013.04.045

Khan, S. H., Aristovich, K. Y. and Borovkov, A. I. (2009). Solution of the Forward Problem in Magnetic-Field Tomography (MFT) Based on Magnetoencephalography (MEG). IEEE TRANSACTIONS ON MAGNETICS, 45(3), pp. 1416-1419. doi: 10.1109/TMAG.2009.2012653

Kirmse, C. and Brücker, C. (2014). On the jet formation through a leaky glottis. Journal of Fluids and Structures, 50, pp. 137-152. doi: 10.1016/j.jfluidstructs.2014.06.022

Kiskiras, J., Jaimoukha, I. M. and Halikias, G. (2013). An explicit state-space approach to the one-block super-optimal distance problem. Mathematics of Control, Signals and Systems, 25(2), pp. 167-196. doi: 10.1007/s00498-012-0097-8

Koehler, M., Hess, D. and Bruecker, C. (2015). Flying PIV measurements in a 4-valve IC engine water analogue to characterize the near-wall flow evolution. Measurement Science and Technology, 26(12), 125302.. doi: 10.1088/0957-0233/26/12/125302

Kogan, I., Pacholak, S., Licht, M., Schneider, J., Brücker, C. and Brandt, S. (2015). The invisible fish: hydrodynamic constraints for predator-prey interaction in fossil fish Saurichthys compared to recent actinopterygians. Biology Open, 4(12), pp. 1715-1726. doi: 10.1242/bio.014720

Kohli, N., Rahman, B. M. and Sharma, E. K. (2017). Improved design for SOI based evanescently coupled multilayer spot-size converter. Optical and Quantum Electronics, 49(6), 229.. doi: 10.1007/s11082-017-1066-8

Kong, D. and Fonseca, J. (2018). Quantification of the morphology of shelly carbonate sands using 3D images. Géotechnique, 68(3), pp. 249-261. doi: 10.1680/jgeot.16.P.278

Kopanidis, A., Theodorakakos, A., Gavaises, M. and Bouris, D. (2011). Pore scale 3D modelling of heat and mass transfer in the gas diffusion layer and cathode channel of a PEM fuel cell. International Journal of Thermal Sciences, 50(4), pp. 456-467. doi: 10.1016/j.ijthermalsci.2010.11.014

Koukouvinis, P., Bergeles, G. and Gavaises, M. (2015). A cavitation aggressiveness index within the Reynolds averaged Navier Stokes methodology for cavitating flows. Journal of Hydrodynamics, Ser. B, 27(4), pp. 579-586. doi: 10.1016/S1001-6058(15)60519-4

Koukouvinis, P., Bruecker, C. and Gavaises, M. (2017). Unveiling the physical mechanism behind pistol shrimp cavitation. Scientific Reports, 7(1), doi: 10.1038/s41598-017-14312-0

Koukouvinis, P. and Gavaises, M. (2015). Simulation of throttle flow with two phase and single phase homogenous equilibrium model. Journal of Physics: Conference Series, 656(1), 012086. doi: 10.1088/1742-6596/656/1/012086

Koukouvinis, P., Gavaises, M., Georgoulas, A. and Marengo, M. (2015). Compressible bubble dynamic simulations with central-upwind schemes. Journal of Physics: Conference Series, 656(1), 012087. doi: 10.1088/1742-6596/656/1/012087

Koukouvinis, P., Gavaises, M., Georgoulas, A. and Marengo, M. (2016). Compressible simulations of bubble dynamics with central-upwind schemes. International Journal of Computational Fluid Dynamics, 30(2), pp. 129-140. doi: 10.1080/10618562.2016.1166216

Koukouvinis, P., Gavaises, M., Li, J. and Wang, L. (2016). Large Eddy Simulation of Diesel injector including cavitation effects and correlation to erosion damage. Fuel, 175, pp. 26-39. doi: 10.1016/j.fuel.2016.02.037

Koukouvinis, P., Gavaises, M., Li, J. and Wang, L. (2015). Large Eddy Simulation of diesel injector opening with a two phase cavitation model. Journal of Physics: Conference Series, 656(1), 012088. doi: 10.1088/1742-6596/656/1/012088

Koukouvinis, P., Gavaises, M., Supponen, O. and Farhat, M. (2016). Numerical simulation of a collapsing bubble subject to gravity. Physics of Fluids, 28(3), doi: 10.1063/1.4944561

Koukouvinis, P., Gavaises, M., Supponen, O. and Farhat, M. (2016). Simulation of bubble expansion and collapse in the vicinity of a free surface. Physics of Fluids, 28(5), 052103.. doi: 10.1063/1.4949354

Koukouvinis, P., Karathanassis, I. K. and Gavaises, M. (2017). Prediction of cavitation and induced erosion inside a high-pressure fuel pump. International Journal of Engine Research, doi: 10.1177/1468087417708137

Koukouvinis, P., Mitroglou, N., Gavaises, M., Lorenzi, M. and Santini, M. (2017). Quantitative predictions of cavitation presence and erosion-prone locations in a high-pressure cavitation test rig. Journal of Fluid Mechanics, 819, pp. 21-57. doi: 10.1017/jfm.2017.156

Koukouvinis, P., Naseri, H. and Gavaises, M. (2017). Performance of turbulence and cavitation models in prediction of incipient and developed cavitation. International Journal of Engine Research, 18(4), pp. 333-350. doi: 10.1177/1468087416658604

Kouris, L.A.S. and Kappos, A. J. (2015). Fragility curves and loss estimation for traditional timber-framed masonry buildings in Lefkas, Greece. Computational Methods in Applied Sciences, 37, pp. 199-233. doi: 10.1007/978-3-319-16130-3_8

Kouris, L.A.S. and Kappos, A. J. (2014). A practice-oriented model for pushover analysis of a class of timber-framed masonry buildings. Engineering Structures, 75, pp. 489-506. doi: 10.1016/j.engstruct.2014.06.012

Kouris, L.A.S., Meireles, H., Bento, R. and Kappos, A. J. (2014). Simple and complex modelling of timber-framed masonry walls in Pombalino buildings. Bulletin of Earthquake Engineering, 12(4), pp. 1777-1803. doi: 10.1007/s10518-014-9586-0

Kovacevic, A. (2015). 9th International Conference on Compressors and their Systems. IOP Conference Series: Materials Science and Engineering, 90(011001), doi: 10.1088/1757-899X/90/1/011001

Kovacevic, A. (2017). Algebraic generation of single domain computational grid for twin screw machines. Part I. Implementation. Advances in Engineering Software, 107, pp. 38-50. doi: 10.1016/j.advengsoft.2017.02.003

Kovacevic, A. (2017). Algebraic generation of single domain computational grid for twin screw machines. Part II. Validation. Advances in Engineering Software, 109, pp. 31-43. doi: 10.1016/j.advengsoft.2017.03.001

Kovacevic, A. (2017). Application of numerical grid generation for improved CFD analysis of multiphase screw machines. IOP Conference Series: Materials Science and Engineering, 232(012017), doi: 10.1088/1757-899X/232/1/012017

Kovacevic, A., Mujic, E., Stosic, N. and Smith, I. K. (2011). Extending the Role of Computational Fluid Dynamics in Screw Machines. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 225(2), pp. 83-97. doi: 10.1177/0954408910397586

Kovacevic, A. and Stosic, N. (2015). Analytical Grid Generation for accurate representation of clearances in CFD for Screw Machines. IOP Conference Series: Materials Science and Engineering, 90(1), 012008. doi: 10.1088/1757-899X/90/1/012008

Kovacevic, A. and Stosic, N. (2013). Grid Generation for Screw Compressors with Variable Geometry Rotors. International Journal of Aerospace and Lightweight Structures, 3(2), doi: 10.3850/S2010428613000603

Kovacevic, A., Stosic, N. and Kethidi, M. (2014). Deforming grid generation and CFD analysis of variable geometry screw compressors. Computers & Fluids, 99, pp. 124-141. doi: 10.1016/j.compfluid.2014.04.024

Kovacevic, A., Stosic, N. and Smith, I. K. (2017). Editorial. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 231(1), p. 3. doi: 10.1177/0954408916685022

Kulesza, T., Stumpf, S., Wong, W-K., Burnett, M., Perona, S., Ko, A. and Oberst, I. (2011). Why-Oriented End-User Debugging of Naïve Bayes Text Classification. Transactions on Interactive Intelligent Systems, 1(1), .2. doi: 10.1145/2030365.2030367

Kumar, A., Rastogi, V., Agrawal, A. and Rahman, B. M. (2012). Birefringence analysis of segmented cladding fiber. Applied Optics, 51(15), pp. 3104-3108. doi: 10.1364/AO.51.003104

Kyriacou, P. A. (2012). Development and in vitro evaluation of an artificial spinal disc loading cell. 2012 Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), pp. 4887-4890. doi: 10.1109/EMBC.2012.6347089

Kyriacou, P. A. (2013). Direct pulse oximetry within the esophagus, on the surface of abdominal viscera, and on free flaps. Anesthesia & Analgesia, 117(4), pp. 824-833. doi: 10.1213/ANE.0b013e3182a1bef6

Kyriacou, P. A. (2005). Pulse oximetry in the oesophagus. Physiological Measurement, 27(1), doi: 10.1088/0967-3334/27/1/R01

Kyriacou, P. A., Choi, D. M., Moye, A. R., Langford, R. M. and Jones, D. P. (1999). Design and evaluation of a new electro-optical system for monitoring oesophageal photoplethysmographs. Medical & Biological Engineering & Computing, 37(1),

Kyriacou, P. A., Crerar-Gilbert, A., Langford, R. M. and Jones, D. P. (2009). Measurement of photoplethysmographic signals in human abdominal organs. Measurement, 42(7), pp. 1027-1031. doi: 10.1016/j.measurement.2009.03.004

Kyriacou, P. A., Hickey, M. and Phillips, J. P. (2013). Pulse oximetry of body cavities and organs. Proceedings of 35th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), pp. 2664-2667. doi: 10.1109/EMBC.2013.6610088

Kyriacou, P. A., Jones, D. P., Langford, R. M. and Petros, A. J. (2007). Pilot study in neonatal and pediatric oesophageal pulse oximetry. Anesthesia and Analgesia, 105(6), S106-S107. doi: 10.1213/01.ane.0000290771.60068.d5

Kyriacou, P. A., Jones, D. P., Langford, R. M. and Petros, A. J. (2008). A pilot study of neonatal and pediatric esophageal pulse oximetry. Anesthesia and Analgesia, 107(3), pp. 905-908. doi: 10.1213/ane.0b013e31817e67d1

Kyriacou, P. A., May, J.M. and Petros, A. J. (2013). Esophageal SpO2 measurements from a pediatric burns-patient: A case study. 35th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), 2013, pp. 1732-1735. doi: 10.1109/EMBC.2013.6609854

Kyriacou, P. A., Moye, A. R., Gregg, A., Choi, D. M., Langford, R. M. and Jones, D. P. (1999). A system for investigating oesophageal photoplethysmographic signals in anaesthetised patients. Medical & Biological Engineering & Computing, 37(5), pp. 639-643. doi: 10.1007/BF02513360

Kyriacou, P. A., Pal, S. K., Langford, R. and Jones, D. P. (2006). Electro-optical techniques for the investigation of oesophageal photoplethysmographic signals and blood oxygen saturation in burns. Measurement & Control, 39(3), pp. 77-79. doi: 10.1177/002029400603900302

Kyriacou, P. A., Pancholi, M. and Yeh, J. (2009). Investigation of the in-vitro loading on an artificial spinal disk prosthesis. Journal of Physics: Conference Series, 178(1), e012023. doi: 10.1088/1742-6596/178/1/012023

Kyriacou, P. A., Powell, S., Langford, R. M. and Jones, D. P. (2002). Esophageal pulse oximetry utilizing reflectance photoplethysmography. IEEE Transactions on Biomedical Engineering, 49(11), pp. 1360-1368. doi: 10.1109/TBME.2002.804584

Kyriacou, P. A., Powell, S., Langford, R. M. and Jones, D. P. (2002). Investigation of oesophageal photoplethysmographic signals and blood oxygen saturation measurements in cardiothoracic surgery patients. Physiological Measurement, 23(3), pp. 533-546. doi: 10.1088/0967-3334/23/3/305

Kyriacou, P. A., Powell, S. L., Jones, D. P. and Langford, R. M. (2003). Evaluation of oesophageal pulse oximetry in patients undergoing cardiothoracic surgery. Anaesthesia, 58(5), pp. 422-427. doi: 10.1046/j.1365-2044.2003.03091.x

Kyriacou, P. A., Shafqat, K. and Pal, S. K. (2007). Investigation of the effect of peripheral perfusion on photoplethysmography and blood oxygen saturation during blood pressure cuff-induced hypoperfusion. British Journal of Anaesthesia, 98(2), 293P-294P. doi: 10.1093/bja/ael319

Kyriacou, P. A., Shafqat, K. and Pal, S. K. (2007). Photoplethysmography and blood oxygen saturation during blood pressure cuff-induced hypoperfusion. Anesthesia and Analgesia, 105(6), S107-S108. doi: 10.1213/01.ane.0000290771.60068.d5

Kyriacou, P. A., Shafqat, K. and Pal, S. K. (2009). Pilot investigation of photoplethysmographic signals and blood oxygen saturation values during blood pressure cuff-induced hypoperfusion. Measurement, 42(7), pp. 1001-1005. doi: 10.1016/j.measurement.2009.02.005

Kyriacou, P. A., Wardhaugh, A., Jones, D. P., Langford, R. M. and Petros, A. J. (2002). Investigation of photoplethysmographic signals in neonatal and paediatric patients. Journal of Intensive Care Medicine, 28, S111-S111. doi: 10.1007/s00134-002-1455-7

Kyriakou, I., Pouliasis, P. K., Papapostolou, N. C. and Andriosopoulos, K. (2017). Freight Derivatives Pricing for Decoupled Mean-Reverting Diffusion and Jumps. Transportation Research Part E: Logistics and Transportation Review, 108, pp. 80-96. doi: 10.1016/j.tre.2017.09.002

Kyriazis, N., Koukouvinis, P. and Gavaises, M. (2017). Numerical investigation of bubble dynamics using tabulated data. International Journal of Multiphase Flow, 93, pp. 158-177. doi: 10.1016/j.ijmultiphaseflow.2017.04.004

Köhnen, C., Überall, C., Rajarajan, M., Jager, R. and Rakocevic, V. (2015). Autonomous QoS Management and Policing in Unmanaged Local Area Networks. Journal of Computer Networks and Communications, 2015, e790375. doi: 10.1155/2015/790375

Labib, M., Moslehy, Y. and Ayoub, A. (2013). Behavior of Reinforced Concrete Membrane Elements Subjected to Bidirectional Shear Loads. ACI Structural Journal, 110(6), pp. 1033-1043.

Labib, M., Moslehy, Y. and Ayoub, A. (2017). Softening Coefficient of Reinforced Concrete Elements Subjected to Three-Dimensional Loads. Magazine of Concrete Research, doi: 10.1680/jmacr.17.00094

Le, B. T., Nadimi, S., Goodey, R.J. and Taylor, R.N. (2016). System to measure three-dimensional movements in physical models. Géotechnique Letters, 6(4), pp. 1-7. doi: 10.1680/jgele.16.00073

Leandro, D., Ams, M., Lopez-Amo, M., Sun, T. and Grattan, K. T. V. (2015). Simultaneous Measurement of Strain and Temperature Using a Single Emission Line. Journal of Lightwave Technology, 33(12), pp. 2426-2431. doi: 10.1109/JLT.2014.2374531

Leandrou, S., Petroudi, S., Kyriacou, P. A., Reyes-Aldasoro, C. C. and Pattichis, C. S. (2015). An overview of quantitative magnetic resonance imaging analysis studies in the assessment of alzheimer’s disease. IFMBE Proceedings, 57, pp. 281-286. doi: 10.1007/978-3-319-32703-7_56

Leandrou, S., Petroudi, S., Reyes-Aldasoro, C. C., Kyriacou, P. A. and Pattichis, C. S. (2018). Quantitative MRI Brain Studies in Mild Cognitive Impairment and Alzheimer's disease: A Methodological Review. IEEE Reviews in Biomedical Engineering, PP(99), doi: 10.1109/RBME.2018.2796598

Lee, J., Park, C. H., Oh, C. S., Han, K. and Kim, T. H. (2016). Coronary Computed Tomographic Angiography at 80 kVp and Knowledge-Based Iterative Model Reconstruction Is Non-Inferior to that at 100 kVp with Iterative Reconstruction. PLoS ONE, 11(9), e0163410.. doi: 10.1371/journal.pone.0163410

Lee, W. C., Hung, F. H., Tsang, K. F., Tung, H. C., Lau, W. H., Rakocevic, V. and Lai, L. (2014). A speedy cardiovascular diseases classifier using multiple criteria decision analysis. Sensors, 15(1), pp. 1312-1320. doi: 10.3390/s150101312

Lei, W., Wu, K., Wang, Y., Cheng, Y., Zheng, X., Dissado, L. A., Dodd, S. J., Chalashkanov, N. M., Fothergill, J., Zhang, C. and Li, W. (2017). Are Nano-composites Really better DC Insulators? A Study using Silica Nanoparticles in XLPE. IEEE Transactions on Dielectrics and Electrical Insulation, 24(4), pp. 2268-2270. doi: 10.1109/TDEI.2017.006613

Leventides, J. and Karcanias, N. (2016). Approximate decomposability in and the canonical decomposition of 3-vectors. Linear and Multilinear Algebra, doi: 10.1080/03081087.2016.1158230

Leventides, J. and Karcanias, N. (2009). Zero assignment of matrix pencils by additive structured transformations. LINEAR ALGEBRA AND ITS APPLICATIONS, 431(8), pp. 1380-1396. doi: 10.1016/j.laa.2009.05.033

Leventides, J., Karcanias, N., Meintanis, I. and Milonidis, E. (2014). Reduced sensitivity solutions to global linearisation of the pole assignment map. Proceedings of the 19th IFAC World Congress, 2014, 19, pp. 4727-4732. doi: 10.3182/20140824-6-ZA-1003.02389

Leventides, J., Livada, M. and Karcanias, N. (2016). Zero Assignment Problem in RLC Networks. IFAC PapersOnLine, 49(9), pp. 92-98. doi: 10.1016/j.ifacol.2016.07.502

Leventides, J., Meintanis, I. and Karcanias, N. ORCID: 0000-0002-1889-6314 (2017). A Grassmann Matrix Approach for the Computation of Degenerate Solutions for Output Feedback Laws. IFAC-PapersOnLine, 50(1), pp. 10839-10844. doi: 10.1016/j.ifacol.2017.08.2378

Leventides, J., Petroulakis, G. and Karcanias, N. (2013). Approximate solutions of the determinantal assignment problem and distance problems. System, Structure and Control, 5(1), pp. 605-610. doi: 10.3182/20130204-3-FR-2033.00097

Leventides, J., Petroulakis, G. and Karcanias, N. (2014). The approximate Determinantal Assignment Problem. Linear Algebra and its Applications, 461, pp. 139-162. doi: 10.1016/j.laa.2014.07.008

Li, F., Rahulamathavan, Y. and Rajarajan, M. (2014). LSD-ABAC: Lightweight Static and Dynamic Attributes Based Access Control Scheme for Secure Data Access in Mobile Environment. 2014 IEEE 39th Conference on Local Computer Networks (LCN), doi: 10.1109/LCN.2014.6925791

Li, Q., Ma, Q.W. ORCID: 0000-0001-5579-6454 and Yan, S. ORCID: 0000-0001-8968-6616 (2015). Investigations on the feature of turbulent viscosity associated with vortex shedding. Procedia Engineering, 126, pp. 73-77. doi: 10.1016/j.proeng.2015.11.181

Li, S., Oikonomou, G., Tryfonas, T., Chen, T. and Xu, L. D. (2014). A Distributed Consensus Algorithm for Decision Making in Service-Oriented Internet of Things. IEEE Transactions on Industrial Informatics, 10(2), pp. 1461-1468. doi: 10.1109/TII.2014.2306331

Li, Y., Chen, X., Divall, S. and Zhang, X. (2017). A study into the behaviour of the formation level of an excavation under different unloading patterns in soft deposits. Arabian Journal of Geosciences, 10(19), 437.. doi: 10.1007/s12517-017-3227-2

Li, Y., Hu, Z., Weng, T., Fonseca, J. and Zhang, X. (2014). Experimental study on the vertical deformation of sand caused by cyclic withdrawal and recharging of groundwater. Engineering Geology, 183, pp. 247-253. doi: 10.1016/j.enggeo.2014.08.020

Li, Y. and Sayma, A. I. (2017). Computational Fluid Dynamics Simulation of Surge in a Three Stage Axial Compressor. International Journal of Turbines & Sustainable Energy Systems, 1(1), doi: 10.4273/ijtses.1.1.04

Li, Y. and Sayma, A. I. (2014). Computational fluid dynamics simulations of blade damage effect on the performance of a transonic axial compressor near stall. Proceedings of the Institution of Mechanical Engineers Part C: Journal of Mechanical Engineering Science, doi: 10.1177/0954406214553828

Liatsis, P., Nazarboland, M. A., Goulermas, J. Y., Zeng, X. J. and Milonidis, E. (2008). Automating the processing of cDNA microarray images. International Journal of Intelligent Systems Technologies and Applications, 5(1-2), pp. 115-144. doi: 10.1504/IJISTA.2008.01817

Lin, M. K,, Silvers, L. J. and Proctor, M. R. E. (2008). Three-Layer Magnetoconvection. Physics Letters A, 373(1), pp. 69-75. doi: 10.1016/j.physleta.2008.10.074

Lipowiecki, M., Ryvolova, M., Toettoesi, A., Kolmer, N., Naher, S., Brennan, S.A., Vazquez, M. and Brabazon, D. (2014). Permeability of rapid prototyped artificial bone scaffold structures. Journal of Biomedical Materials Research Part A, 102(11), pp. 4127-4135. doi: 10.1002/jbm.a.35084

Liu, D., Wang, F., Fu, F. and Wang, H. (2017). Experimental Research on the Failure Mechanism of Foam Concrete with C-Channel Embedment. Computers and Concrete, An International Journal, 20(3), pp. 263-273. doi: 10.12989/cac.2017.20.3.263

Liu, F., Fu, F., Wang, Y. and Liu, Q. (2017). Fire performance of non-load-bearing light-gauge slotted steel stud walls. Journal of Constructional Steel Research, 137, pp. 228-241. doi: 10.1016/j.jcsr.2017.06.034

Liu, J., Khan, U., Coleman, J., Fernandez, B., Rodriguez, P., Naher, S. and Brabazon, B. (2016). Graphene Oxide and Graphene Nanosheet Reinforced Aluminium Matrix Composites: powder synthesis and prepared composite characteristics. Materials & Design, 94, pp. 87-94. doi: 10.1016/j.matdes.2016.01.031

Liu, X. and Banerjee, J. R. (2015). An exact spectral-dynamic stiffness method for free flexural vibration analysis of orthotropic composite plate assemblies - Part II: Applications. Composite Structures, 132, pp. 1288-1302. doi: 10.1016/j.compstruct.2015.07.022

Liu, Y. and Xu, H. (2014). Entropic approximation for mathematical programs with robust equilibrium constraints. SIAM Journal on Optimization, 24(3), pp. 933-958. doi: 10.1137/130931011

Liu, Z., Geng, Y., Dong, H., Wilson, J., Micic, T., Wu, R., Cui, X., Qian, Y., You, W. and Sun, H. (2018). Efficient distribution of carbon emissions reduction targets at the city level: A case of Yangtze River Delta region. Journal of Cleaner Production, 172, pp. 1711-1721. doi: 10.1016/j.jclepro.2017.12.033

Llado, X., Imiya, A., Mason, D., Reyes-Aldasoro, C. C., Aoki, K., Kudo, M., Zhang, Y. and Argyriou, V. (2015). Corrigendum to 'Homage to Professor Maria Petrou' [ Pattern Recognition Letters 48 (2014) 2-7].. Pattern Recognition Letters, 54(1), p. 109. doi: 10.1016/j.patrec.2015.01.006

Llado, X., Imiya, A., Reyes-Aldasoro, C. C., Mason, D., Aoki, K., Kudo, M., Zhang, Y. and Argyriou, V. (2014). Homage to Professor Maria Petrou. Pattern Recognition Letters, 48, pp. 2-7. doi: 10.1016/j.patrec.2014.06.008

Llapashtica, E., Sadler, J., Barbur, J. L., Connolly, D. M., Sun, T. and Grattan, K. T. V. (2017). Integrated saccade latency as a measure of fatigue. Aerospace medicine and human performance, 88(3), p298.

Lockett, R. D. (2006). Instabilities and soot formation in spherically expanding, high pressure, rich, iso-octane-air flames. Journal of Physics: Conference Series, 45, pp. 154-160. doi: 10.1088/1742-6596/45/1/020

Lockett, R. D., Ball, D. and Robertson, G. (2013). Experimental cross-correlation Nitrogen Q-branch CARS Thermometry in a Spark Ignition Engine. Optics and Lasers in Engineering, 51(7), pp. 929-943. doi: 10.1016/j.optlaseng.2013.02.010

Lockett, R. D., Fatmi, Z., Kuti, O. and Price, R. (2015). An Investigation into the Effect of Hydrodynamic Cavitation on Diesel using Optical Extinction. Journal of Physics: Conference Series, 656(1), 012091. doi: 10.1088/1742-6596/656/1/012091

Lockett, R. D., Fatmi, Z., Kuti, O. and Price, R. (2016). An Optical Characterization of the Effect of High-Pressure Hydrodynamic Cavitation on Diesel. SAE Technical Papers, pp. 2014-01.

Lockett, R. D., Jeshani, M., Makri, K. and Price, R. (2016). An Optical Characterization of Atomization in Non-Evaporating Diesel Sprays. SAE Technical Papers, 2016-01-0865. doi: 10.4271/2016-01-0865

Lockett, R. D., Liverani, L., Thaker, D., Jeshani, M. and Tait, N. P. (2013). The characterisation of diesel nozzle flow using high speed imaging of elastic light scattering. Fuel, 106, pp. 605-616. doi: 10.1016/j.fuel.2012.10.065

Lockett, R. D., Ndamuso, N. and Price, R. (2015). Cavitation Inception in Immersed Jet Shear Flows. Journal of Physics: Conference Series, 656(1), 012090. doi: 10.1088/1742-6596/656/1/012090

Lockett, R. D. and Robertson, G. (2014). A Dynamical Systems Analysis of Methanol-Air Auto-Ignition. ., doi: 10.13140/2.1.2907.1369

Lockett, R. D. and Woolley, R. (2007). Instabilities and soot formation in high-pressure, rich, iso-octane-air explosion flames - 1. Dynamical structure. Combustion and Flame, 151(4), pp. 601-622. doi: 10.1016/j.combustflam.2007.08.004

Lu, C., Su, J., Dong, X., Sun, T. ORCID: 0000-0003-3861-8933 and Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2018). Simultaneous Measurement of Strain and Temperature with a Few-Mode Fibre-based Sensor. Journal of Lightwave Technology, doi: 10.1109/JLT.2018.2825294

Lu, J., Yang, Z., Wu, H., Wu, W., Liu, F., Xu, S., Yang, H. and Yan, S. (2016). Model experiment on the dynamic process of oil leakage from the double hull tanker. Journal of Loss Prevention in the Process Industries, 43, pp. 174-180. doi: 10.1016/j.jlp.2016.05.013

Lun, Y. H., Carlton, J. and Bichou, K. (2016). Examining the economic impact of transport complex economies. Journal of Shipping and Trade, 1(1), doi: 10.1186/s41072-016-0005-3

Ma, H., Wang, Z., Wang, L., Zhang, Q., Yang, Z. and Bao, Y. (2016). Ramp heating in high-speed transient thermal measurement with reduced uncertainty. Journal of Propulsion and Power, 32(5), pp. 1190-1198. doi: 10.2514/1.B35803

Ma, Q. (2008). A new meshless interpolation scheme for MLPG_R method. CMES-Computer Modeling in Engineering & Sciences, 23(2), pp. 75-90.

Ma, Q. and Yan, S. (2006). Quasi ALE finite element method for nonlinear water waves. Journal of Computational Physics, 212(1), pp. 52-72. doi: 10.1016/j.jcp.2005.06.014

Ma, Q., Yan, S., Greaves, D., Mai, T. and Raby, A. (2015). Numerical and experimental studies of Interaction between FPSO and focusing waves. Proceedings of the International Offshore and Polar Engineering Conference, 2015-J, ISOPE-I.

Ma, Q. and Zhou, J. (2009). MLPG_R Method for Numerical Simulation of 2D Breaking Waves. CMES: Computer Modeling in Engineering & Sciences, 43(3), pp. 277-304. doi: 10.3970/cmes.2009.043.277

Ma, Q., Zhou, Y. and Yan, S. (2016). A review on approaches to solving Poisson’s equation in projection-based meshless methods for modelling strongly nonlinear water waves. Journal of Ocean Engineering and Marine Energy, 2(3), pp. 279-299. doi: 10.1007/s40722-016-0063-5

Madhav, K. V. and Kovacevic, A. (2015). Economics of water injected air screw compressor systems. IOP Conference Series: Materials Science and Engineering, 90(1), 012012. doi: 10.1088/1757-899X/90/1/012012

Maisel, M. E., Stephenson, K. G., South, M., Rodgers, J., Freeston, M. H. and Gaigg, S. B. (2016). Modeling the Cognitive Mechanisms Linking Autism Symptoms and Anxiety in Adults. Journal of Abnormal Psychology, 125(5), pp. 692-703. doi: 10.1037/abn0000168

Malgarinos, I., Nikolopoulos, N. and Gavaises, M. (2015). Coupling a local adaptive grid refinement technique with an interface sharpening scheme for the simulation of two-phase flow and free-surface flows using VOF methodology. Journal of Computational Physics, 300, pp. 732-753. doi: 10.1016/j.jcp.2015.08.004

Malgarinos, I., Nikolopoulos, N. and Gavaises, M. (2017). Numerical investigation of heavy fuel droplet-particle collisions in the injection zone of a Fluid Catalytic Cracking reactor, Part I: Numerical model and 2D simulations. Fuel Processing Technology, 156, pp. 317-330. doi: 10.1016/j.fuproc.2016.09.014

Malgarinos, I., Nikolopoulos, N. and Gavaises, M. (2017). Numerical investigation of heavy fuel droplet-particle collisions in the injection zone of a Fluid Catalytic Cracking reactor, part II: 3D simulations. Fuel Processing Technology, 156, pp. 43-53. doi: 10.1016/j.fuproc.2016.09.012

Malgarinos, I., Nikolopoulos, N. and Gavaises, M. (2016). A numerical study on droplet-particle collision dynamics. International Journal of Heat and Fluid Flow, doi: 10.1016/j.ijheatfluidflow.2016.06.010

Malgarinos, I., Nikolopoulos, N., Marengo, M., Antonini, C. and Gavaises, M. (2014). VOF simulations of the contact angle dynamics during the drop spreading: Standard models and a new wetting force model. Advances in Colloid and Interface Science, 212, pp. 1-20. doi: 10.1016/j.cis.2014.07.004

Maloku, H., Hamiti, E., Limani, Z., Papadopoulou Lesta, V., Pitsillides, A. and Rajarajan, M. (2017). A decentralized approach for self-coexistence among heterogeneous networks in TVWS. IEEE Transactions on Vehicular Technology, doi: 10.1109/TVT.2017.2755605

Mamouei, M. H., Kaparias, I. and Halikias, G. ORCID: 0000-0003-1260-1383 (2018). A framework for user- and system-oriented optimisation of fuel efficiency and traffic flow in Adaptive Cruise Control. Transportation Research Part C: Emerging Technologies, 92, pp. 27-41. doi: 10.1016/j.trc.2018.02.002

Mamouei, M. H., Kaparias, I. and Halikias, G. (2016). A quantitative approach to behavioural analysis of drivers in highways using particle filtering. Transportation Planning and Technology, 39(1), doi: 10.1080/03081060.2015.1108084

Manu, P., Ankrah, N., Proverbs, D. and Suresh, S. (2013). Mitigating the health and safety influence of subcontracting in construction: The approach of main contractors. International Journal of Project Management, 31(7), pp. 1017-1026. doi: 10.1016/j.ijproman.2012.11.011

Marian, L. and Giaralis, A. (2017). The tuned mass-damper-inerter for harmonic vibrations suppression, attached mass reduction, and energy harvesting. Smart structures and systems, 19(6), pp. 665-678. doi: 10.12989/sss.2017.19.6.665

Marichal, N., Tomas-Rodriguez, M., Castillo Rivera, S. and Hernandez, A. (2012). Modelling and Analysis of Vibrations in a UAV Helicopter with a Vision System. International Journal of Advanced Robotic Systems, 9, p. 220. doi: 10.5772/52761

Marichal, N., Tomas-Rodriguez, M., Hernandez, A., Castillo, S. and Campoy, P. (2013). Vibration reduction for vision systems on board UAV using a neuro-fuzzy controller. Journal of Vibration and Control, 20(15), pp. 2243-2253. doi: 10.1177/1077546313479632

Markides, C., Themistos, C., Tanvir, H. M., Rahman, B. M. and Grattan, K. T. V. (2013). Multimode Interference 3 dB Splitters in Hollow Core Metallic Waveguides for Low-Loss THz Wave Transmission. IEEE Journal of Selected Topics in Quantum Electronics, 19(1), doi: 10.1109/JSTQE.2012.2215018

Mavridou, S., Mavropoulos, G. C., Bouris, D., Hountalas, D. T. and Bergeles, G. (2010). Comparative design study of a diesel exhaust gas heat exchanger for truck applications with conventional and state of the art heat transfer enhancements. Applied Thermal Engineering, 30(8-9), pp. 935-947. doi: 10.1016/j.applthermaleng.2010.01.003

May, J.M., Hickey, M., Triantis, I., Palazidou, E. and Kyriacou, P. A. (2014). Optical analysis of Lithium Carbonate: Towards the development of a Portable Lithium Blood Level analyzer for Bipolar Disorder Patients. 2014 36th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), pp. 2077-2080. doi: 10.1109/EMBC.2014.6944025

May, J.M., Hickey, M., Triantis, I., Palazidou, E. and Kyriacou, P. A. (2015). Spectrophotometric analysis of Lithium Carbonate used for Bipolar Disorder. Biomedical Optics Express, 6(3), pp. 1067-1073. doi: 10.1364/BOE.6.001067

May, J.M., Kyriacou, P. A., Honsel, M. and Petros, A. J. (2014). Investigation of photoplethysmographs from the anterior fontanelle of neonates. Physiological Measurement, 35(10), pp. 1961-1973. doi: 10.1088/0967-3334/35/10/1961

May, J.M., Kyriacou, P. A. and Petros, A. J. (2011). Development of an Optoelectronic Sensor for the Investigation of Photoplethysmographic Signals from the Anterior Fontanel of the Newborn. Engineering in Medicine and Biology Society, EMBC, 2011 Annual International Conference of the IEEE, pp. 18-21. doi: 10.1109/IEMBS.2011.6089886

Mazzanti, G., Castellon, J., Chen, G., Fothergill, J., Fu, M., Hozumi, N., Lee, J. H., Li, J., Marzinotto, M., Mauseth, F., Morshuis, P., Reed, C., Troia, I., Tzimas, A. and Wu, K. (2019). The Insulation of HVDC Extruded Cable System Joints. Part 2: Proposal of a New AC Voltage PD Measurement Protocol for Quality Control during Routine Tests. IEEE Transactions on Dielectrics and Electrical Insulation, 26(3), pp. 973-980. doi: 10.1109/TDEI.2019.007917

McCague, C., Fabian, M., Karimi, M., Bravo, M., Jaroszewicz, L. R., Mergo, P., Sun, T. and Grattan, K. T. V. (2014). Novel Sensor Design Using Photonic Crystal Fibres for Monitoring the Onset of Corrosion in Reinforced Concrete Structures. Journal of Lightwave Technology, 32(5), pp. 891-896. doi: 10.1109/JLT.2013.2293120

McGuinness-Abdollahi, Z., Thaha, M. A., Ramsanahie, A., Ahmed, S., Kyriacou, P. A. and Phillips, J. P. (2015). Intraoperative monitoring of intestinal viability: Evaluation of a new combined sensor. Engineering in Medicine and Biology Society (EMBC), 2015 37th Annual International Conference of the IEEE, 2015, pp. 5126-5129. doi: 10.1109/EMBC.2015.7319545

McNamara, A. M., Goodey, R.J. and Taylor, R.N. (2009). Apparatus for centrifuge modelling of top down basement construction with heave reducing piles. International Journal of Physical Modelling in Geotechnics, 9(1), pp. 1-14. doi: 10.1680/ijpmg.2009.9.1.01

McNamara, A. M. and Gorasia, Rohit J. (2016). High-capacity ribbed pile foundations. Proceedings of the Institution of Civil Engineers: Geotechnical Engineering, 169(3), pp. 264-275. doi: 10.1680/jgeen.15.00073

McNamara, A. M., Panchal, J. P. and Stallebrass, S. (2018). Physical modelling of lime stabilisation in soft soils around deep excavations. DFI Journal - The Journal of the Deep Foundations Institute, doi: 10.1080/19375247.2018.1436254

McNamara, A. M., Roberts, T. O. L., Morrison, P. R. J. and Holmes, G. R. (2008). Construction of a deep shaft for Crossrail. Geotechnical Engineering, 161(6), pp. 299-309. doi: 10.1680/geng.2008.161.6.299

McNamara, A. M., Suckling, T., McKinley, B. and Stallebrass, S. E. (2014). A field trial of a reusable, hollow, cast-in-situ pile. Proceedings of the ICE - Geotechnical Engineering, 167(4), pp. 390-401. doi: 10.1680/geng.12.00102

McNamara, A. M. and Taylor, R.N. (2004). The influence of enhanced excavation base stiffness on prop loads and ground movements during basement construction. The Structural Engineer, 82(4), pp. 30-36.

Mergos, P.E. (2017). Contribution to sustainable seismic design of reinforced concrete members through embodied CO2 emissions optimization. Structural Concrete, doi: 10.1002/suco.201700064

Mergos, P.E. (2016). Optimum seismic design of reinforced concrete frames according to Eurocode 8 and fib Model Code 2010. Earthquake Engineering and Structural Dynamics, doi: 10.1002/eqe.2851

Mergos, P.E. (2018). Seismic design of reinforced concrete frames for minimum embodied CO2 emissions. Energy and Buildings, 162, pp. 177-186. doi: 10.1016/j.enbuild.2017.12.039

Mergos, P.E. (2013). The anchorage-slip effect on direct displacement-based design of R/C bridge piers for limiting material strains. Computers and Concrete, 11(6), pp. 493-513. doi: 10.12989/cac.2013.11.6.493

Mergos, P.E. and Beyer, K. (2014). Loading protocols for European regions of low to moderate seismicity. Bulletin of Earthquake Engineering, pp. 1-24. doi: 10.1007/s10518-014-9603-3

Mergos, P.E. and Beyer, K. (2014). Modelling shear-flexure interaction in equivalent frame models of slender RC walls. The Structural Design of Tall and Special Buildings, 23(15), pp. 1171-1189. doi: 10.1002/tal.1114

Mergos, P.E. and Kappos, A. J. (2013). Analytical study on the influence of distributed beam vertical loading on seismic response of frame structures. Earthquake and Structures, 5(2), pp. 239-259.

Mergos, P.E. and Kappos, A. J. (2015). Estimating fixed-end rotations of reinforced concrete members at yielding and ultimate. Structural Concrete, 16(4), pp. 537-545. doi: 10.1002/suco.201400067

Mergos, P.E. and Kappos, A. J. (2010). Seismic damage analysis including inelastic shear-flexure interaction. Bulletin of Earthquake Engineering, 8(1), pp. 27-46. doi: 10.1007/s10518-009-9161-2

Mergos, P.E. and Kappos, A. J. (2015). A combined damage index for seismic assessment of non-ductile reinforced concrete structures. Civil-Comp Proceedings, 108, 144.. doi: 10.4203/ccp.108.144

Mergos, P.E. and Kappos, A. J. (2013). A combined local damage index for seismic assessment of existing RC structures. Earthquake Engineering and Structural Dynamics, 42(6), pp. 833-852. doi: 10.1002/eqe.2247

Mergos, P.E. and Kappos, A. J. (2008). A distributed shear and flexural flexibility model with shear-flexure interaction for R/C members subjected to seismic loading. Earthquake Engineering & Structural Dynamics, 37(12), pp. 1349-1370. doi: 10.1002/eqe.812

Mergos, P.E. and Kawashima, K. (2005). Rocking isolation of a typical bridge pier on spread foundation. Journal of Earthquake Engineering, 9(Sup2), pp. 395-414. doi: 10.1142/S1363246905002456

Miao, X., Zhang, Q., Wang, L., Jiang, H. and Qi, H. (2015). Application of riblets on turbine blade endwall secondary flow control. Journal of Propulsion and Power, 31(6), pp. 1578-1585. doi: 10.2514/1.B35549

Micic, T. (2016). Risk reality vs risk perception. Journal of Risk Research, 19(10), pp. 1261-1274. doi: 10.1080/13669877.2015.1121900

Micic, T., Stojic, D., Stankovic, M. and Velimirovic, N. (2016). Gamma process model for timber-concrete composite beam deterioration prediction. Wood Research, 61(3), pp. 373-385.

Mikulich, V. and Brücker, C. (2014). Cavitation by spall fracture of solid walls in liquids. Experiments in Fluids, 55, 1785.. doi: 10.1007/s00348-014-1785-6

Mikulich, V. and Brücker, C. (2013). Flow and motion behavior of particle suspensions in shear flow over a rough surface. WIT Transactions on Engineering Sciences, 79, pp. 263-272. doi: 10.2495/MPF130221

Miller, N. R., Verhoeven, J. ORCID: 0000-0002-0738-8517 and Reyes-Aldasoro, C. C. ORCID: 0000-0002-9466-2018 (2018). Analysis of the symmetry of electrodes for Electropalatography with Cone Beam CT Scanning. Communications in Computer and Information Science, 2018, pp. 130-139. doi: 10.1007/978-3-319-95921-4_14

Milojevic, M. and Rakocevic, V. (2014). Distributed Road Traffic Congestion Quantification Using Cooperative VANETs. 13th Annual Mediterranean Ad Hoc Networking Workshop (MED-HOC-NET), pp. 203-210. doi: 10.1109/MedHocNet.2014.6849125

Milojevic, M. and Rakocevic, V. (2015). Location Aware Data Aggregation for Efficient Message Dissemination in Vehicular Ad Hoc Networks. IEEE Transactions on Vehicular Technology, 64(12), pp. 5575-5583. doi: 10.1109/TVT.2015.2487830

Milonidis, E., Kostarigka, A. and Karcanias, N. (2011). Finite settling time stabilisation: the robust SISO case. International Journal of Control, 84(9), pp. 1521-1532. doi: 10.1080/00207179.2011.611949

Mirshahi, M., Yan, Y. and Nouri, J. M. (2015). Influence of cavitation on near nozzle exit spray. Journal of Physics: Conference Series,, 656(1), 012093. doi: 10.1088/1742-6596/656/1/012093

Mishra, J. K., Priye, V. and Rahman, B. M. (2016). Augmenting data rate performance for higher order modulation in triangular index profile multicore fiber interconnect. Optics Communications, 371, pp. 40-46. doi: 10.1016/j.optcom.2016.03.038

Mishra, J. K., Priye, V. and Rahman, B. M. (2015). Error probability performance of a short-reach multicore fiber optical interconnect transmission system. Optics Letters, 40(19), pp. 4556-4559. doi: 10.1364/OL.40.004556

Mishra, J. K., Rahman, B. M. and Priye, V. (2016). Rectangular Array Multicore Fiber Realizing Low Crosstalk Suitable for Next-Generation Short-Reach Optical Interconnects With Low Misalignment Loss. IEEE Photonics Journal, 8(4), doi: 10.1109/JPHOT.2016.2591002

Mitolidis, G. J., Salonikios, T. N. and Kappos, A. J. (2012). Test results and strength estimation of R/C beams strengthened against flexural or shear failure by the use of SRP and CFRP. Composites Part B: Engineering, 43(3), pp. 1117-1129. doi: 10.1016/j.compositesb.2011.11.034

Mitolidis, G. J., Salonikios, T. N. and Kappos, A. J. (2012). Tests on RC Beams Strengthened at the Span with Externally Bonded Polymers Reinforced with Carbon or Steel Fibers. Journal of Composites for Construction, 16(5), pp. 551-562. doi: 10.1061/(ASCE)CC.1943-5614.0000281

Mitroglou, N., Lorenzi, M., Santini, M. and Gavaises, M. (2016). Application of X-ray micro-computed tomography on high-speed cavitating diesel fuel flows. Experiments in Fluids, 57(11), p. 175. doi: 10.1007/s00348-016-2256-z

Mitroglou, N., Lorenzi, M., Santini, M., Gavaises, M. and Assanis, D. (2015). Application of cone-beam micro-CT on high-speed Diesel flows and quantitative cavitation measurements. Journal of Physics: Conference Series, 656(1), 012094. doi: 10.1088/1742-6596/656/1/012094

Mitroglou, N., McLorn, M., Gavaises, M., Soteriou, C. and Winterbourne, M. (2014). Instantaneous and ensemble average cavitation structures in Diesel micro-channel flow orifices. Fuel, 116, pp. 736-742. doi: 10.1016/j.fuel.2013.08.060

Mitroglou, N., Stamboliyski, V., Karathanassis, I. K., Nikas, K.S. and Gavaises, M. (2017). Cloud cavitation vortex shedding inside an injector nozzle. Experimental Thermal and Fluid Science, 84, pp. 179-189. doi: 10.1016/j.expthermflusci.2017.02.011

Mitseas, I., Kougioumtzoglou, I., Giaralis, A. and Beer, M. (2018). A novel stochastic linearization framework for seismic demand estimation of hysteretic MDOF systems subject to linear response spectra. Structural Safety, 72, pp. 84-98. doi: 10.1016/j.strusafe.2017.12.008

Modi, C., Patel, D., Patel, H., Borisaniya, B., Patel, A. and Rajarajan, M. (2013). A survey of intrusion detection techniques in Cloud. Journal of Network and Computer Applications, 36(1), pp. 42-57. doi: 10.1016/j.jnca.2012.05.003

Mohanty, V., Moliya, D., Hota, C. and Rajarajan, M. (2010). Secure Anonymous Routing for MANETs Using Distributed Dynamic Random Path Selection. Intelligence and Security Informatics, 6122, pp. 65-72. doi: 10.1007/978-3-642-13601-6_8

Moschonas, I. F. and Kappos, A. J. (2012). Assessment of concrete bridges subjected to ground motion with an arbitrary angle of incidence: static and dynamic approach. Bulletin of Earthquake Engineering, 11(2), pp. 581-605. doi: 10.1007/s10518-012-9395-2

Moslehy, Y., Labib, M., Ayoub, A. and Mullapudi, R. (2016). Influence of Fiber-Reinforced Polymer Sheets on the Constitutive Relationships of Reinforced Concrete Elements. Journal of Composites for Construction, 20(2), doi: 10.1061/(ASCE)CC.1943-5614.0000616

Mou, Z., Triantis, I., Woods, V. M., Toumazou, C. and Nikolic, K. (2012). A simulation study of the combined thermoelectric extracellular stimulation of the sciatic nerve of the Xenopus laevis: the localized transient heat block. IEEE Transactions on Biomedical Engineering, 59(6), pp. 1758-1769. doi: 10.1109/TBME.2012.2194146

Moye, A. R., Kyriacou, P. A., Gregg, A., Jones, D. P. and Langford, R. M. (1999). Photoplethysmographic (PPG) signals recorded from the human oesophagus. British Journal of Anaesthesia, A-57,

Mujic, E., Kovacevic, A., Stosic, N. and Smith, I. K. (2011). Noise generation and suppression in twin screw compressors. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 225(2), pp. 127-148. doi: 10.1177/1464419311403875

Mujic, E., Kovacevic, A., Stosic, N. and Smith, I. K. (2008). The influence of port shape on gas pulsations in a screw compressor discharge chamber. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 222(4), pp. 211-223. doi: 10.1243/09544089JPME205

Mullapudi, T. and Ayoub, A. (2013). Analysis of Reinforced Concrete Columns Subjected to Combined Axial, Flexure, Shear, and Torsional Loads. Journal of Structural Engineering, 139(4), pp. 561-573. doi: 10.1061/(ASCE)ST.1943-541X.0000680

Mullapudi, T. and Ayoub, A. (2013). Non-linear analysis of reinforced concrete walls under three-dimensional loading. Magazine of Concrete Research, 65(3), pp. 172-184. doi: 10.1680/macr.12.00038

Mylonas, Nicos, Ioannides, K., Hadjisavvas, V., Iosif, D., Kyriacou, P. A. and Damianou, C. (2010). Evaluation of fast spin echo MRI sequence for an MRI guided high intensity focused ultrasound system for in vivo rabbit liver ablation. Journal of Biomedical Science and Engineering, 3(3), pp. 241-246. doi: 10.4236/jbise.2010.33032

Nadimi, S. and Fonseca, J. (2016). Enhancing soil sample preparation by thermal cycling. Géotechnique, 66(11), pp. 953-958. doi: 10.1680/jgeot.15.T.033

Nadimi, S. and Fonseca, J. (2017). Single-Grain Virtualization for Contact Behavior Analysis on Sand. Journal of Geotechnical and Geoenvironmental Engineering, 143(9), 06017010.. doi: 10.1061/(ASCE)GT.1943-5606.0001740#sthash.NgJgwZ5K.dpuf

Nadimi, S. and Fonseca, J. (2017). A micro finite element model for soil behaviour: Numerical validation. Géotechnique, doi: 10.1680/jgeot.16.P.163

Nadimi, S. and Fonseca, J. (2017). A micro finite-element model for soil behaviour. Géotechnique, 68(4), pp. 290-302. doi: 10.1680/jgeot.16.P.147

Naher, S., Ahmad, A.H. and Brabazon, D. (2014). Direct thermal method of aluminium 7075. Advanced Materials Research, 939, pp. 400-408. doi: 10.4028/www.scientific.net/AMR.939.400

Naher, S., Orpen, D., Brabazon, D., Poulsen, C.R. and Morshed, M.M. (2010). Effect of micro-channel geometry on fluid flow and mixing. Simulation Modelling Practice and Theory, 19(4), pp. 1088-1095. doi: 10.1016/j.simpat.2010.12.008

Naseri, H., Koukouvinis, P. and Gavaises, M. (2015). Evaluation of Turbulence Models Performance in Predicting Incipient Cavitation in an Enlarged Step-Nozzle. Journal of Physics: Conference Series, 656(1), 012095. doi: 10.1088/1742-6596/656/1/012095

Naseri, H., Koukouvinis, P., Malgarinos, I. and Gavaises, M. ORCID: 0000-0003-0874-8534 (2018). On viscoelastic cavitating flows: A numerical study. Physics of Fluids, 30(3), 033102. doi: 10.1063/1.5011978

Naseri, H., Trickett, K., Mitroglou, N. ORCID: 0000-0002-2955-8716, Karathanassis, I. K. ORCID: 0000-0001-9025-2866, Koukouvinis, P. ORCID: 0000-0002-3945-3707, Gavaises, M. ORCID: 0000-0003-0874-8534, Barbour, R., Diamond, D., Rogers, S. E., Santini, M. and Wang, J. (2018). Turbulence and Cavitation Suppression by Quaternary Ammonium Salt Additives. Scientific Reports, 8, 7636.. doi: 10.1038/s41598-018-25980-x

Nguyen, K., Camara, A., Rio, O. and Sparowitz, L. (2017). Dynamic Effects of Turbulent Crosswind on the Serviceability State of Vibrations of a Slender Arch Bridge Including Wind-Vehicle-Bridge Interaction. Journal of Bridge Engineering, 22(11), 06017005. doi: 10.1061/(ASCE)BE.1943-5592.0001110

Nguyen, T.H., Hardwick, S., Sun, T. and Grattan, K. T. V. (2012). Intrinsic Fluorescence-Based Optical Fiber Sensor for Cocaine Using a Molecularly Imprinted Polymer as the Recognition Element. IEEE Sensors Journal, 12(1), pp. 255-260. doi: 10.1109/JSEN.2011.2158537

Nguyen, T.H., Sun, T. and Grattan, K. T. V. (2016). Surface plasmon resonance based fibre-optic chemical sensor for the detection of cocaine. Proceedings of SPIE, 9916, 991612.. doi: 10.1117/12.2236938

Nguyen, T.H., Venugopala, T., Chen, S., Sun, T., Grattan, K. T. V., Taylor, S.E., Basheer, P.A.M. and Long, A.E. (2014). Fluorescence based fibre optic pH sensor for the pH 10-13 range suitable for corrosion monitoring in concrete structures. Sensors and Actuators, B: Chemical, 191, pp. 498-507. doi: 10.1016/j.snb.2013.09.072

Nguyen, T.H., Wren, S., Sun, T. and Grattan, K. T. V. (2017). Development of a fiber-optic chemical sensor for the detection of cadmium. Proceedings of IEEE Sensors, doi: 10.1109/ICSENS.2016.7808852

Nicolas Marichal, G., Tomas-Rodriguez, M., Hernandez, A., Castillo-Rivera, S. and Campoy, P. (2014). Vibration reduction for vision systems on board unmanned aerial vehicles using a neuro-fuzzy controller. Journal of Vibration and Control, 20(15), pp. 2243-2253. doi: 10.1177/1077546313479632

Nikolić, B., Khan, S.H. and Gabdullin, N. (2016). Development of non-conventional instrument transformers (NCIT) using smart materials. Journal of Physics: Conference Series, 772(1), 012065.. doi: 10.1088/1742-6596/772/1/012065

Nikolopoulos, N., Strotos, G., Nikas, K-S., Theodorakakos, A., Gavaises, M., Marengo, M. and Cossali, G. E. (2010). Single droplet impacts onto deposited drops. Numerical analysis and comparison. Atomization and Sprays, 20(11), pp. 935-953. doi: 10.1615/AtomizSpr.v20.i11.20

Nikolopoulos, N., Theodorakakos, A. and Bergeles, G. (2009). Off-centre binary collision of droplets: A numerical investigation. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 52(19-20), pp. 4160-4174. doi: 10.1016/j.ijheatmasstransfer.2009.04.011

Nikolopoulos, N., Violidakis, I., Karampinis, E., Agraniotis, M., Bergins, C. and Panagiotis, G. (2015). Report on comparison among current industrial scale lignite drying technologies. Fuel, 155, pp. 86-114. doi: 10.1016/j.fuel.2015.03.065

Njoum, H. and Kyriacou, P. A. (2018). In vitro validation of measurement of volume elastic modulus using photoplethysmography. Medical Engineering & Physics, 52, pp. 10-21. doi: 10.1016/j.medengphy.2017.11.011

Njoum, H. and Kyriacou, P. A. (2013). Investigation of finger reflectance photoplethysmography in volunteers undergoing a local sympathetic stimulation. Journal of Physics: Conference Series, 450(1), 012012. doi: 10.1088/1742-6596/450/1/012012

Njoum, H. and Kyriacou, P. A. (2016). Photoplethysmography for an independent measure of pulsatile pressure under controlled flow conditions. Physiological Measurement, 38(2), 87.. doi: 10.1088/1361-6579/38/2/87

Njoum, H. and Kyriacou, P. A. (2017). Photoplethysmography for the Assessment of Haemorheology. Scientific Reports, 7, 1406.. doi: 10.1038/s41598-017-01636-0

Nouri, J. M. and Hockey, R. (2008). Flow characteristics of Newtonian and non-Newtonian fluids in a vessel stirred by a 60° pitched blade impeller. The International Journal of Multiphysics, 2(1), pp. 83-105. doi: 10.1260/175095408784300261

Oates, A., Cabrera-Espana, F., Agrawal, A. and Reehal, H. S. (2014). Fabrication and characterisation of Si micropillar PV structures. Energy Materials, 9(4), pp. 500-504.

Olteanu Raimond, A. M., Xiao, Y., Liu, J., Chen, T. and Chen, C. L. P. (2013). Nonintrusive tracing in the Internet. Security and Communication Networks, 6(7), pp. 833-843. doi: 10.1002/sec.616

Omidyeganeh, M. and Piomelli, U. (2013). Large-eddy simulation of three-dimensional dunes in a steady, unidirectional flow. Part 1. Turbulence statistics. Journal of Fluid Mechanics, 721, pp. 454-483. doi: 10.1017/jfm.2013.36

Omidyeganeh, M. and Piomelli, U. (2013). Large-eddy simulation of three-dimensional dunes in a steady, unidirectional flow. Part 2. Flow structures. Journal of Fluid Mechanics, 734, pp. 509-534. doi: 10.1017/jfm.2013.499

Omidyeganeh, M. and Piomelli, U. (2011). Large-eddy simulation of two-dimensional dunes in a steady, unidirectional flow. Journal of Turbulence, 12(42), pp. 1-31. doi: 10.1080/14685248.2011.609820

Ostmann, S., Chaves, H. and Bruecker, C. (2017). Path instabilities of light particles rising in a liquid with background rotation. Journal of Fluids and Structures, 70, pp. 403-416. doi: 10.1016/j.jfluidstructs.2017.02.007