Browse by Schools and Department by Authors
- City, University of London (24651)
- School of Science & Technology (7450)
- Engineering (3591)
- School of Science & Technology (7450)
2025
Mergos, P. E. ORCID: 0000-0003-3817-9520 & Yang, X-S. (2025). Structural Optimization of Reinforced Concrete Frames with a Modified Flower Pollination Algorithm. In: Yang, X-S. (Ed.), Springer Tracts in Nature-Inspired Computing. Springer Tracts in Nature-Inspired Computing. (pp. 33-50). Singapore: Springer Nature Singapore. doi: 10.1007/978-981-97-5979-8_2
2024
Abdeldayem, A., Paggini, A., Diurno, T. , Orazi, C., White, M. ORCID: 0000-0002-7744-1993, Ruggiero, M. & Sayma, A. I. ORCID: 0000-0003-2315-0004 (2024). Integrated Aerodynamic and Mechanical Design of a Large-Scale Axial Turbine Operating With A Supercritical Carbon Dioxide Mixture. Journal of Engineering for Gas Turbines and Power, 146(2), article number 021011. doi: 10.1115/1.4063530
Abdeldayem, A. S., Salah, S. I., Aqel, O. A. , White, M. T. ORCID: 0000-0002-7744-1993 & Sayma, A. I. ORCID: 0000-0003-2315-0004 (2024). Design of a 130 MW Axial Turbine Operating with a Supercritical Carbon Dioxide Mixture for the SCARABEUS Project. International Journal of Turbomachinery, Propulsion and Power, 9(1), article number 5. doi: 10.3390/ijtpp9010005
Abdulsalam, M., Ahiska, K. & Aouf, N. ORCID: 0000-0001-9291-4077 (2024). A Transformer‐Based Network for Full Object Pose Estimation with Depth Refinement. Advanced Intelligent Systems, 6(10), doi: 10.1002/aisy.202400110
Ahmed, T., Powner, M. B. ORCID: 0000-0003-4913-1004, Qassem, M. & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2024). Colorimetric Determination of Salivary Cortisol Levels in Artificial Saliva for the Development of a Portable Colorimetric Sensor (Salitrack). Sci, 6(2), article number 20. doi: 10.3390/sci6020020
Al-Halawani, R., Qassem, M. ORCID: 0000-0003-0730-3189 & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2024). Monte Carlo simulation of the effect of melanin concentration on light-tissue interactions in transmittance and reflectance finger photoplethysmography. Scientific Reports, 14(1), article number 8145. doi: 10.1038/s41598-024-58435-7
Al-Halawani, R., Qassem, M. ORCID: 0000-0003-0730-3189 & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2024). Monte Carlo simulation of the effect of melanin concentration on light–tissue interactions for transmittance pulse oximetry measurement. Journal of Biomedical Optics, 29(S3), S33305-. doi: 10.1117/1.jbo.29.s3.s33305
Alali, A. A., Huang, Y. & Tsavdaridis, K. ORCID: 0000-0001-8349-3979 (2024). Comparative Life Cycle Assessment (LCA) of the Composite Prefabricated Ultra-Shallow Slabs (PUSS) and Hollow Core Slabs in the UK. Journal of Building Engineering, 96, article number 110588. doi: 10.1016/j.jobe.2024.110588
Alali, A. A. & Tsavdaridis, K. ORCID: 0000-0001-8349-3979 (2024). Experimental Investigation on Flexural Behaviour of Prefabricated Ultra-Shallow Steel Concrete Composite Slabs. Journal of Constructional Steel Research, 217, article number 108632. doi: 10.1016/j.jcsr.2024.108632
Alias, M. A., Ahmad, H., Annuar Zaini, M. K. , Samion, M. Z., Mohd Sa'ad, M. S., Sing, L. K., Grattan, K. T. V. ORCID: 0000-0003-2250-3832, Azizur Rahman, B. M., Brambilla, G., Reduan, S. A., Bayang, L. & Ismail, M. F. (2024). Optical fiber Bragg grating (FBG)-based strain sensor embedded in different 3D-printed materials: A comparison of performance. Measurement, 225, article number 114060. doi: 10.1016/j.measurement.2023.114060
Allen, J. & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2024). Editorial: Advances in basic and applied research in photoplethysmography. Frontiers in Physiology, 15, article number 1415049. doi: 10.3389/fphys.2024.1415049
Almutairi, F. F. & Tsavdaridis, K. ORCID: 0000-0001-8349-3979 (2024). Capacity Design Assessment of Composite Reduced Web Section (RWS) Connections. Engineering structures, 316, article number 118558. doi: 10.1016/j.engstruct.2024.118558
Amend, M. & Rakocevic, V. ORCID: 0000-0002-3081-0448 (2024). Cost-efficient multipath scheduling of video-on-demand traffic for the 5G ATSSS splitting function. Computer Networks, 242, article number 110218. doi: 10.1016/j.comnet.2024.110218
Aqel, O., White, M. ORCID: 0000-0002-7744-1993 & Sayma, A. ORCID: 0000-0003-2315-0004 (2024). Loss Analysis in Radial Inflow Turbines for Supercritical CO2 Mixtures. Journal of Turbomachinery, 146(5), article number 051003. doi: 10.1115/1.4064193
Asteris, P., Tsavdaridis, K. ORCID: 0000-0001-8349-3979, Lemonis, M. E. , Ferreira, F. P. V., Formisano, A. & Gantes, C. (2024). AI-Powered GUI for Prediction of Axial Compression Capacity in Concrete-Filled Steel Tube Columns. Neural Computing and Applications, doi: 10.1007/s00521-024-10405-w
Azad, D., Apostolopoulou, D. ORCID: 0000-0002-9012-9910 & Alonso, E. ORCID: 0000-0002-3306-695X (2024). Initial Estimate of AC Optimal Power Flow with Graph Neural Networks. Paper presented at the Power Systems Computation Conference (PSCC'24), 4-7 Jun 2024, Paris.
Bellini, R., Rodriguez, C., Karathanassis, I. K. ORCID: 0000-0001-9025-2866 , Pickett, L., Gavaises, M. ORCID: 0000-0003-0874-8534 & Geber, E. (2024). Modelling of wall-bounded cavitating flow and spray mixing in multi-component environments using the PC-SAFT equation of state. Applications in Energy and Combustion Science, 20, article number 100295. doi: 10.1016/j.jaecs.2024.100295
Bikramaditya, N., Rane, S. ORCID: 0000-0002-8732-2242, Kovacevic, A. ORCID: 0000-0002-8732-2242 & Patel, B. (2024). CFD Analysis of Leakage Flow in Radial Tip Gap of Roots Blower. In: Read, M., Rane, S. ORCID: 0000-0002-8732-2242, Ivkovic-Kihic, I. & Kovacevic, A. ORCID: 0000-0002-8732-2242 (Eds.), 13th International Conference on Compressors and Their Systems (ICCS 2023). 13th International Conference on Compressors and Their Systems, 11-13 Sep 2023, London, UK. doi: 10.1007/978-3-031-42663-6_4
Boiarkin, V., Bogaz Zarpelao, B., Al-Zaili, J. & Rajarajan, M. ORCID: 0000-0001-5814-9922 (2024). A Privacy-Preserving User-Centric Data-Sharing Scheme. IEEE Access, 12, pp. 149977-149987. doi: 10.1109/access.2024.3476209
Bradley, G. R. E. ORCID: 0000-0003-2504-5152 & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2024). Evaluating the effectiveness of non-invasive intracranial pressure monitoring via near-infrared photoplethysmography using classical machine learning methods. Biomedical Signal Processing and Control, 96(Part B), article number 106517. doi: 10.1016/j.bspc.2024.106517
Bradley, G. R. E. & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2024). Exploring the dynamic relationship: Changes in photoplethysmography features corresponding to intracranial pressure variations. Biomedical Signal Processing and Control, 98, article number 106759. doi: 10.1016/j.bspc.2024.106759
Bradley, G. R. E. & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2024). Opening the envelope: Efficient envelope-based PPG denoising algorithm. Biomedical Signal Processing and Control, 88(Part A), article number 105693. doi: 10.1016/j.bspc.2023.105693
Bradley, G.R.E. (2024). The Dynamic Relationship between Photoplethysmography Features and Intracranial Pressure in Patients with Traumatic Brain Injury. (Unpublished Doctoral thesis, City, University of London)
Cabrera‐España, F. J., Kamuka, A., Khaled, A. , Hameed, M. F. O., Obayya, S. S. A. & Rahman, B. M. A. ORCID: 0000-0001-6384-0961 (2024). Optical and electrical characterization of solar cell with nanowires mimicking antireflection coating layers considering axial and radial PN junctions. Energy Science & Engineering, 12(5), pp. 1987-2003. doi: 10.1002/ese3.1722
Cai, B., Lu, S. & Fu, F. ORCID: 0000-0002-9176-8159 (2024). Behavior of steel fiber-reinforced coal gangue concrete beams under impact load. Engineering Structures, 314, article number 118306. doi: 10.1016/j.engstruct.2024.118306
Cai, B., Tong, J. & Fu, F. ORCID: 0000-0002-9176-8159 (2024). Bond performance of FRP bar reinforced concrete under monotonic load and fatigue effect. Proceedings of the Institution of Civil Engineers - Structures and Buildings, pp. 1-20. doi: 10.1680/jstbu.23.00102
Cavallazzi, G. M. ORCID: 0000-0001-7529-3256, Guastoni, L., Vinuesa, R. & Pinelli, A. ORCID: 0000-0001-5564-9032 (2024). Deep Reinforcement Learning for the Management of the Wall Regeneration Cycle in Wall-Bounded Turbulent Flows. Flow, Turbulence and Combustion, doi: 10.1007/s10494-024-00609-4
Ceran, T. (2024). Seismic analysis of prestressed concrete containment vessels considering ageing effects. (Unpublished Doctoral thesis, City, University of London)
Chekakta, Z. ORCID: 0000-0002-4664-6283 & Aouf, N. ORCID: 0000-0001-9291-4077 (2024). CaDNET: An End-to-End Plenoptic Camera-Based Deep Learning Pose Estimation Approach for Space Orbital Rendezvous. IEEE Sensors Journal, 24(18), pp. 29441-29451. doi: 10.1109/jsen.2024.3435748
Chekakta, Z. ORCID: 0000-0002-4664-6283, Aouf, N., Govindaraj, S. , Polisano, F. & De Cubber, G. (2024). Towards Learning-Based Distributed Task Allocation Approach for Multi-Robot System. In: 2024 10th International Conference on Automation, Robotics and Applications (ICARA). 2024 10th International Conference on Automation, Robotics and Applications (ICARA), 22-24 Feb 2024, Athens, Greece. doi: 10.1109/icara60736.2024.10553196
Chekakta, Z. ORCID: 0000-0002-4664-6283, Zenati, A. & Aouf, N. ORCID: 0000-0001-9291-4077 (2024). Enhancing Cooperative Visual SLAM with a Self-Supervised Deep Learning Model for Efficient Keypoint-Based Inter-map Loop Closure Detection. In: 2024 IEEE 20th International Conference on Automation Science and Engineering (CASE). 2024 IEEE 20th International Conference on Automation Science and Engineering (CASE), 28 Aug - 1 Sep 2024, Bari, Italy. doi: 10.1109/case59546.2024.10711729
Cheng, J-F., Qian, G., Qian, K. , Fu, F. ORCID: 0000-0002-9176-8159 & Xiao-Fang, D. (2024). Dynamic behavior of RC frames against progressive collapse subjected to loss of a corner column scenario. Journal of Building Engineering, 86, article number 108872. doi: 10.1016/j.jobe.2024.108872
Cholostiakow, S., McKinley, B., Mergos, P. ORCID: 0000-0003-3817-9520 , Hall, C., Kappos, A. ORCID: 0000-0002-5566-5021 & Ayoub, A. ORCID: 0000-0002-2670-9662 (2024). Seismic retrofitting of URM masonry piers with helical steel reinforcement. Construction and Building Materials, 431, article number 136499. doi: 10.1016/j.conbuildmat.2024.136499
Christou, A., Yan, S. ORCID: 0000-0001-8968-6616, Ma, Q. ORCID: 0000-0001-5579-6454 & Xie, Z. (2024). Fluid Structure Interactions with the method of Large Eddy Simulations – Free fall impact of a triangular wedge. In: Proceedings of the International Offshore and Polar Engineering Conference.
Corfar, D. A. & Tsavdaridis, K. ORCID: 0000-0001-8349-3979 (2024). Experimental Test on a Hybrid Inter-Module Connection for Steel Modular Building Systems. Paper presented at the World Conference on Earthquake Engineering (WCEE 2024), 30 Jun - 5 Jul 2024, Milan, Italy.
Corfar, D. A. ORCID: 0000-0002-9843-2973 & Tsavdaridis, K. ORCID: 0000-0001-8349-3979 (2024). Testing Novel Hybrid Inter-Module Joints for Steel Modular Buildings Under Cyclic Load. Engineering structures, 315, article number 118495. doi: 10.1016/j.engstruct.2024.118495
Court, A. ORCID: 0000-0002-6302-4961 & Bruecker, C. ORCID: 0000-0001-5834-3020 (2024). Fly by Feel: Flow Event Detection via Bioinspired Wind-Hairs. Fluids, 9(3), article number 74. doi: 10.3390/fluids9030074
Degtyarev, V. V., Hicks, S., Ferreira, F. P. V. & Tsavdaridis, K. ORCID: 0000-0001-8349-3979 (2024). Probabilistic resistance predictions of laterally restrained cellular steel beams by natural gradient boosting. Thin-Walled Structures, 205, article number 112367. doi: 10.1016/j.tws.2024.112367
Divall, S. ORCID: 0000-0001-9212-5115, Davies, M. C. R., Stallebrass, S. E. ORCID: 0000-0002-3747-9524 , Mahony, J., Quintavalle, S., Bowen-Bravery, J., Johnson-Watts, T. & Mulligan, R. (2024). Giant shear box tests on recycled 6F5 for tracked plant platforms. In: Guerra, N., Matos Fernandes, M., Ferreira, C. , Gomes Correia, A., Pinto, A. & Pinto, P. S. (Eds.), Geotechnical Engineering Challenges to Meet Current and Emerging Needs of Society. XVIII European Conference on Soil Mechanics and Geotechnical Engineering, 26-30 Aug 2024, Lisbon, Portugal. doi: 10.1201/9781003431749-427
Dixit, A. (2024). Improving the Identity and Access Management Capabilities of Industrial Internet of Things. (Unpublished Doctoral thesis, City, University of London)
Dixit, A. ORCID: 0000-0002-5476-0772, Zarpelao, B. B., Smith-Creasey, M. & Rajarajan, M. ORCID: 0000-0001-5814-9922 (2024). A privacy-aware authentication and usage-controlled access protocol for IIoT decentralized data marketplace. Computers & Security, 146, article number 104050. doi: 10.1016/j.cose.2024.104050
El Samad, T. ORCID: 0000-0003-1590-9885, Żabnieńska-Góra, A., Jouhara, H. & Sayma, A. I. ORCID: 0000-0003-2315-0004 (2024). A review of compressors for high temperature heat pumps. Thermal Science and Engineering Progress, 51, article number 102603. doi: 10.1016/j.tsep.2024.102603
Faisal, M., Karim, M. R., Shafiq, T. & Rahman, B. M. A. ORCID: 0000-0001-6384-0961 (2024). Dispersion tailored suspended core SiN channel waveguide for broadband supercontinuum generation. Optical and Quantum Electronics, 56(3), article number 351. doi: 10.1007/s11082-023-05906-2
Ferizoli, R., Karimpour, P., May, J. M. & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2024). Arterial stiffness assessment using PPG feature extraction and significance testing in an in vitro cardiovascular system. Scientific Reports, 14(1), article number 2024. doi: 10.1038/s41598-024-51395-y
Ferreira, F. P. V., Jeong, S-H., Mansouri, E. , Shamass, R., Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979, Martins, C. H. & De Nardin, S. (2024). Five Machine Learning Models Predicting the Global Shear Capacity of Composite Cellular Beams with Hollow-Core Units. Buildings, 14(7), article number 2256. doi: 10.3390/buildings14072256
Ghavami, M. ORCID: 0000-0002-0772-7726, White, M. T., Chibli, H. & Sayma, A. I. (2024). Design and Simulation of a Blowdown Facility for Supercritical Carbon Dioxide. In: Proceedings of ASME Turbo Expo 2024. ASME Turbo Expo 2024: Turbomachinery Technical Conference and Exposition, 24-28 Jun 2024, London, UK. doi: 10.1115/gt2024-129415
Gidado, I., Al-Halawani, R., Qassem, M. & Kyriacou, P. ORCID: 0000-0002-2868-485X (2024). Development and Analysis of a Multi-Wavelength Near-Infrared Sensor for Monitoring Skin Hydration and Validation Using Monte Carlo Simulation. Photonic Sensors, 14(3), article number 240306. doi: 10.1007/s13320-024-0719-z
Gidado, I. M., Nwokoye, I. I., Triantis, I. F. ORCID: 0000-0002-8900-781X , Qassem, M. ORCID: 0000-0003-0730-3189 & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2024). Multi-Modal Spectroscopic Assessment of Skin Hydration. Sensors, 24(5), article number 1419. doi: 10.3390/s24051419
Glick, R. ORCID: 0000-0001-7789-9358, Brücker, C. ORCID: 0000-0001-5834-3020, Fabian, M. & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2024). Tracking hydrodynamic disturbances with fibre-optic whiskers. Optics and Lasers in Engineering, 177, article number 108125. doi: 10.1016/j.optlaseng.2024.108125
Guzmán-Iñigo, J. ORCID: 0000-0002-1833-6034 & Morgans, A. S. (2024). Designing the edges of holes (with bias flow) to maximise acoustic damping. Journal of Sound and Vibration, 575, article number 118224. doi: 10.1016/j.jsv.2023.118224
Güler, M. A., Artac, A., Yildirim, B. & Tsavdaridis, K. ORCID: 0000-0001-8349-3979 (2024). Design Methods of Aluminium Pin-Ended Columns with Topology-Optimised Cross-Sections. Buildings, 14(11), article number 3588. doi: 10.3390/buildings14113588
Hakeem, A. H., Morar, N. I. ORCID: 0000-0001-9109-8864, Dawson, K. , Tatlock, G. J., Gibson, G. J. & Gray, S. (2024). Effects of surface hardening by laser shock peening and shot peening on a nickel-based single-crystal superalloy CMSX-4. Materials Research Express, 11(7), article number 076527. doi: 10.1088/2053-1591/ad6535
Hashemi, S. M. ORCID: 0000-0002-8341-7500 & Ayoub, A. ORCID: 0000-0002-2670-9662 (2024). Improved Bond Stress-Slip Relationships for Carbon Fibre-Reinforced Polymer-Strengthened Masonry Triplets. Buildings, 14(1), article number 257. doi: 10.3390/buildings14010257
Hassani, V., Porichis, A., Mahmood, F. & Chatzakos, P. (2024). Enhancing Material Thickness Measurement: Ultrasonic Sensor Data Analysis and Thickness Prediction Using Neural Networks. Applications of Modelling and Simulation, 8(2024), pp. 78-92.
Huang, J-D. ORCID: 0000-0002-3519-0559, Wang, H. ORCID: 0000-0003-2633-6015, Power, U. ORCID: 0000-0003-3246-3774 , McLaughlin, J. A. ORCID: 0000-0001-6026-8971, Nugent, C. ORCID: 0000-0003-0882-7902, Rahman, E. ORCID: 0000-0001-7238-1859, Barabas, J. ORCID: 0000-0002-0297-1412 & Maguire, P. ORCID: 0000-0002-2725-4647 (2024). Detecting Respiratory Viruses Using a Portable NIR Spectrometer—A Preliminary Exploration with a Data Driven Approach. Sensors, 24(1), article number 308. doi: 10.3390/s24010308
Hwang, J., Karathanassis, I. K. ORCID: 0000-0001-9025-2866, Koukouvinis, P. , Nguyen, T., Tagliante, F., Pickett, L. M., Sforzo, B. A. & Powell, C. F. (2024). Spray process of multi-component gasoline surrogate fuel under ECN Spray G conditions. International Journal of Multiphase Flow, 174, article number 104753. doi: 10.1016/j.ijmultiphaseflow.2024.104753
Jebelli, M., Shariloo, K. & Masdari, M. ORCID: 0000-0002-1159-2406 (2024). Vortex-plate interaction in wake-induced vibration: A study of single and parallel flat plates behind a cylinder. Ocean Engineering, 300, article number 117340. doi: 10.1016/j.oceaneng.2024.117340
Jin, Q., He, D., Cao, X. , Fu, F. ORCID: 0000-0002-9176-8159, Chen, Y., Zhang, M. & Ren, Y. (2024). Shear strength prediction of high strength steel reinforced reactive powder concrete beams. Advances in Concrete Construction, 17(2), pp. 75-92. doi: 10.12989/acc.2024.17.2.072
Jouhara, H., Żabnieńska-Góra, A., Delpech, B. , Olabi, V., El Samad, T. ORCID: 0000-0003-1590-9885 & Sayma, A. I. ORCID: 0000-0003-2315-0004 (2024). High-temperature heat pumps: fundamentals, modelling approaches and applications. Energy, 303, article number 131882. doi: 10.1016/j.energy.2024.131882
Karim, M. R., Al Kayed, N., Rafi, R. & Rahman, B. M. A. ORCID: 0000-0001-6384-0961 (2024). Design and analysis of inverse tapered silicon nitride waveguide for flat and highly coherent supercontinuum generation in the mid-infrared. Optical and Quantum Electronics, 56(1), article number 68. doi: 10.1007/s11082-023-05636-5
Karimpour, P., Ferizoli, R. ORCID: 0009-0002-9169-9533, May, J. M. ORCID: 0000-0002-8659-756X & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2024). Customisable Silicone Vessels and Tissue Phantoms for In Vitro Photoplethysmography Investigations into Cardiovascular Disease. Sensors, 24(5), article number 1681. doi: 10.3390/s24051681
Khader, M. A. ORCID: 0000-0002-5771-2258, Ghavami, M. ORCID: 0000-0002-0772-7726, Al-Zaili, J. ORCID: 0000-0003-4072-2107 & Sayma, A. I. ORCID: 0000-0003-2315-0004 (2024). Residential Micro-CHP system with integrated Phase change material thermal energy storage. Energy, 300, article number 131606. doi: 10.1016/j.energy.2024.131606
Kodama, H. ORCID: 0009-0005-3970-0770, Ishida, K., Hirayama, H. ORCID: 0000-0001-7342-024X , Orgun, D., Kawashima, K. ORCID: 0009-0001-3436-6516, Nikkhah, D., May, J. ORCID: 0000-0002-8659-756X, Kyriacou, P. & Miyawaki, T. (2024). Correlation between laser Doppler flowmetry metrics and continuous blood pressure in free flap monitoring. Journal of Plastic, Reconstructive & Aesthetic Surgery, 96, pp. 196-198. doi: 10.1016/j.bjps.2024.07.059
Koukas, E. (2024). Computational modeling of cavitation-tissue interactions. (Unpublished Doctoral thesis, City, University of London)
Kumar, A., Patil, S., Kovacevic, A. ORCID: 0000-0002-8732-2242 & Ponnusami, S. A. ORCID: 0000-0002-2143-8971 (2024). Performance prediction and Bayesian optimization of screw compressors using Gaussian Process Regression. Engineering Applications of Artificial Intelligence, 133, article number 108270. doi: 10.1016/j.engappai.2024.108270
Kumar, A. P., Méndez, J. P., Burela, R. G. , Bisagni, C., Harursampath, D. & Ponnusami, S. A. ORCID: 0000-0002-2143-8971 (2024). Non-linear buckling analysis of delaminated hat-stringer panels using variational asymptotic method. Composite Structures, 345, article number 118276. doi: 10.1016/j.compstruct.2024.118276
Leventides, J., Melas, E., Poulios, C. ORCID: 0000-0002-8443-2112 , Livada, M. ORCID: 0000-0002-0432-872X, Poulios, N. C. ORCID: 0000-0003-2583-1153 & Boufounou, P. ORCID: 0000-0002-2239-3744 (2024). Application of the Fractal Brownian Motion to the Athens Stock Exchange. Fractal and Fractional, 8(8), article number 454. doi: 10.3390/fractalfract8080454
Li, Y., Yan, S. ORCID: 0000-0001-8968-6616, Shi, H. , Ma, Q. ORCID: 0000-0001-5579-6454, Dong, X. & Cao, F. (2024). Wave load characteristics on a hybrid wind-wave energy system. Ocean Engineering, 294, article number 116827. doi: 10.1016/j.oceaneng.2024.116827
Li, Z., Tsavdaridis, K. ORCID: 0000-0001-8349-3979 & Katenbayeva, A. (2024). Reusable Timber Modular Buildings, Material Circularity and Automation: The role of inter-locking connections. Journal of Building Engineering, 98, article number 110965. doi: 10.1016/j.jobe.2024.110965
Li, Z., Xu, K., Wang, Z. , Bi, K., Qin, H. & Giaralis, A. ORCID: 0000-0002-2952-1171 (2024). Analytical Design of Non-grounded Tuned Mass-Damper-Inerter for Base-excited Structures. International Journal of Mechanical Sciences, 276, article number 109394. doi: 10.1016/j.ijmecsci.2024.109394
Liu, F., Xu, T., Chan, Y. W. S. & Tsavdaridis, K. ORCID: 0000-0001-8349-3979 (2024). Grid Optimization of Free-Form Spatial Structures Considering the Mechanical Properties. Buildings, 14(10), article number 3191. doi: 10.3390/buildings14103191
Liu, P., Zhang, N., Yan, S. ORCID: 0000-0001-8968-6616 , Ma, Q. ORCID: 0000-0001-5579-6454 & Li, Q. (2024). Preliminary Investigation on Predicting Wave Pressure in Single-phase ISPH by GNN Trained using Two-phase Navier-Stokes Solutions. In: Proceedings of the International Offshore and Polar Engineering Conference.
Lyras, T. (2024). Large Eddy Simulation of Flash Induced Spray Atomization. (Unpublished Doctoral thesis, City, University of London)
Lyras, T. ORCID: 0000-0002-9783-4786, Karathanassis, I. K. ORCID: 0000-0001-9025-2866, Kyriazis, N. , Koukouvinis, P. & Gavaises, M. ORCID: 0000-0003-0874-8534 (2024). Modelling of liquid oxygen and nitrogen injection under flashing conditions. Applied Thermal Engineering, 237, article number 121773. doi: 10.1016/j.applthermaleng.2023.121773
Ma, Q. ORCID: 0000-0001-5579-6454, Zhang, N., Yan, S. ORCID: 0000-0001-8968-6616 & Li, Q. (2024). Numerical simulation of wave-floater interactions using ISPH_GNN trained on data for wave-only cases. Ocean Engineering, 306, article number 118041. doi: 10.1016/j.oceaneng.2024.118041
Maleki, B., del Mar Casanovas-Rubio, M., Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 & de la Fuente Antequera, A. (2024). Integrated Value Model for Sustainable Assessment of Modular Residential Towers: Case Study: Ten Degrees Croydon and Apex House in London. Sustainability, 16(2), article number 497. doi: 10.3390/su16020497
Manolesos, M. ORCID: 0000-0002-5506-6061, Celik, Y., Ramsay, H. ORCID: 0000-0003-1588-9677 , Karande, R., Wood, B., Dinwoodie, I., Masters, I., Harrold, M. & Papadakis, G. (2024). Performance improvement of a Vestas V52 850kW wind turbine by retrofitting passive flow control devices. In: Journal of Physics: Conference Series. The Science of Making Torque from Wind (TORQUE 2024), 29 -31 May 2024, Florence, Italy. doi: 10.1088/1742-6596/2767/2/022027
Megalingam, A., Ahmad, A. H., Alang, N. A. , Alias, J. & Naher, S. ORCID: 0000-0003-2047-5807 (2024). Creep Behaviour of Aluminium 7075 Feedstock Billet Globular Microstructure at High Processing Temperature. Journal of Failure Analysis and Prevention, 24(3), pp. 1324-1332. doi: 10.1007/s11668-024-01917-7
Mergos, P. E. ORCID: 0000-0003-3817-9520 (2024). Benchmark problems in optimum structural design of 3D reinforced concrete frames. Journal of Building Engineering, 91, article number 109554. doi: 10.1016/j.jobe.2024.109554
Mergos, P. E. ORCID: 0000-0003-3817-9520 (2024). Structural design of reinforced concrete frames for minimum amount of concrete or embodied carbon. Energy and Buildings, 318, article number 114505. doi: 10.1016/j.enbuild.2024.114505
Midmer, A. ORCID: 0000-0002-3288-0597 & Brücker, C. ORCID: 0000-0001-5834-3020 (2024). Vortex dynamics in the wake of bio-inspired flexible, slotted winglets. Journal of Fluids and Structures, 128, article number 104138. doi: 10.1016/j.jfluidstructs.2024.104138
Midmer, A. ORCID: 0000-0002-3288-0597, Brücker, C. ORCID: 0000-0001-5834-3020, Weger, M. , Wagner, H. & Bleckmann, H. (2024). Interaction of barn owl leading edge serrations with freestream turbulence. Bioinspiration & Biomimetics, 19(3), article number 036014. doi: 10.1088/1748-3190/ad3a4f
Midmer, A. S. & Bruecker, C. ORCID: 0000-0001-5834-3020 (2024). Modification of Swept-Wing Tip Vortex With Nature-Inspired, Serrated Leading Edge. In: AIAA AVIATION FORUM AND ASCEND 2024. AIAA AVIATION FORUM AND ASCEND 2024, 29 Jul - 02 Aug 2024, Las Vegas, USA. doi: 10.2514/6.2024-4474
Mikes, I. G. (2024). Optimisation of dynamic response of bridges through control of joint gap size. (Unpublished Doctoral thesis, City, University of London)
Mohamad Tajudin, M. F., Ahmad, A. H., Alias, J. , Abd Razak, N. A. & Naher, S. ORCID: 0000-0003-2047-5807 (2024). Thermal Profile and Microstructure Analysis of Al-Si with the Magnesium Addition under Different Cooling Conditions. International Journal of Metalcasting, doi: 10.1007/s40962-024-01388-4
Mohammad, R. H. (2024). Fiber Reinforced Cementitious Mortar (FRCM) systems used for strengthening of concrete beams at ambient and elevated temperatures. (Unpublished Doctoral thesis, City, University of London)
Morar, N. I. ORCID: 0000-0001-9109-8864, Holtham, N., Hackel, L. , Davami, K., Sharma, M., DeWald, A. & Roy, R. ORCID: 0000-0001-5491-7437 (2024). Effects of high energy laser peening followed by pre-hot corrosion on stress relaxation, microhardness and fatigue life and strength of single crystal nickel CMSX-4® superalloy. In: Procedia Structural Integrity. Fatigue Design 2023, 29-30 Nov 2023, Senlis, France. doi: 10.1016/j.prostr.2024.03.069
Mozafari, M. ORCID: 0009-0004-4897-4530, Sadeghimalekabadi, M. ORCID: 0009-0001-6327-2607, Fardi, A. ORCID: 0009-0005-6396-3028 , Bruecker, C. ORCID: 0000-0001-5834-3020 & Masdari, M. ORCID: 0000-0002-1159-2406 (2024). Aeroacoustic investigation of a ducted wind turbine employing bio-inspired airfoil profiles. Physics of Fluids, 36(4), article number 041918. doi: 10.1063/5.0204050
Mucolli, A., Midmer, A. ORCID: 0000-0002-3288-0597, Manolesos, M. , Aldosari, S., Lira, C. & Yazdani Nezhad, H. ORCID: 0000-0003-0832-3579 (2024). Low Magnetic Field Induced Extrinsic Strains in Multifunctional Particulate Composites: An Interrupted Mechanical Strengthening in 3D-Printed Nanocomposites. Journal of Composites Science, 8(6), article number 231. doi: 10.3390/jcs8060231
Nibouche, O., Asharindavida, F., Wang, H. , Vincent, J., Liu, J., van Ruth, S., Maguire, P. & Rahman, E. ORCID: 0000-0001-7238-1859 (2024). A new sub-class linear discriminant for miniature spectrometer based food analysis. Chemometrics and Intelligent Laboratory Systems, 250, article number 105136. doi: 10.1016/j.chemolab.2024.105136
Nomoni, M. (2024). Novel Pulsatile Phantoms in Photoplethysmography. (Unpublished Doctoral thesis, City, University of London)
Nwokoye, I. I. & Triantis, I. F. ORCID: 0000-0002-8900-781X (2024). A 3 MHz Low-Error Adaptive Howland Current Source for High-Frequency Bioimpedance Applications. Sensors, 24(13), article number 4357. doi: 10.3390/s24134357
Nwokoye, I. I. & Triantis, I. F. ORCID: 0000-0002-8900-781X (2024). A Phase Error Correction System for Bioimpedance Measurement Circuits. Applied Sciences, 14(12), article number 5202. doi: 10.3390/app14125202
Pantazopoulou, S., Tomas-Rodriguez, M. ORCID: 0000-0001-9630-9579, Kalogeropoulos, G. & Halikias, G. (2024). Pole Assignment for Symmetric Quadratic Dynamical Systems: An Algorithmic Method. Paper presented at the 28th International Conference on Circuits, Systems, Communications and Computers (CSCC), 19-22 Jul 2024, Heraklion, Crete Island, Greece. doi: 10.37394/23203.2024.19.24
Pieska, M. ORCID: 0000-0001-9017-5071, Kassler, A. ORCID: 0000-0002-9446-8143, Brunstrom, A. ORCID: 0000-0001-7311-9334 , Rakocevic, V. ORCID: 0000-0002-3081-0448 & Amend, M. (2024). Performance Impact of Nested Congestion Control on Transport-Layer Multipath Tunneling. Future Internet, 16(7), article number 233. doi: 10.3390/fi16070233
Qian, K., Lan, X., Deng, X-F. & Fu, F. ORCID: 0000-0002-9176-8159 (2024). Load Resistance of Masonry Infilled Panels for Steel Frames to Mitigate Progressive Collapse Caused by Middle Column Missing. Journal of Building Engineering, 97, article number 110757. doi: 10.1016/j.jobe.2024.110757
Qian, K., Weng, Y-H., Liang, S-L. & Fu, F. ORCID: 0000-0002-9176-8159 (2024). Punching shear behavior and corrosion resistance of composite slab-column connections reinforced by BFRP and steel rebar. Engineering Structures, 304, article number 117589. doi: 10.1016/j.engstruct.2024.117589
Quilodrán-Casas, C., Li, Q., Zhang, N. , Cheng, S., Yan, S. ORCID: 0000-0001-8968-6616, Ma, Q. ORCID: 0000-0001-5579-6454 & Arcucci, R. (2024). Exploring unseen 3D scenarios of physics variables using machine learning-based synthetic data: An application to wave energy converters. Environmental Modelling & Software, 177, article number 106051. doi: 10.1016/j.envsoft.2024.106051
Rabi, M., Jweihan, Y. S., Abarkan, I. , Ferreira, F. P. V., Shamass, R., Limbachiya, V., Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 & Pinho Santos, L. F. (2024). Machine learning-driven web-post buckling resistance prediction for high-strength steel beams with elliptically-based web openings. Results in Engineering, 21, article number 101749. doi: 10.1016/j.rineng.2024.101749
Rahman, E., Liatsis, P., Hashim, Z. Q. , Kyriacou, P. A. ORCID: 0000-0002-2868-485X & Triantis, I. F. ORCID: 0000-0002-8900-781X (2024). A Quadruple-Sweep Bioimpedance Sensing Method for Arterial Stenosis Detection. IEEE Access, 12, pp. 18594-18605. doi: 10.1109/access.2024.3356564
Rajana, K. (2024). Optimal design and assessment of nonlinear inerter vibration absorbers for earthquake response mitigation of building structures. (Unpublished Doctoral thesis, City, University of London)
Rajana, K. & Giaralis, A. ORCID: 0000-0002-2952-1171 (2024). Optimal tuning and assessment of non-grounded regenerative tuned mass damper inerter (RE-TMDI) configurations for concurrent motion control and energy harvesting. In: Journal of Physics: Conference Series. XII International Conference on Structural Dynamics, 3-5 Jul 2023, Delft, Netherlands. doi: 10.1088/1742-6596/2647/3/032012
Ramsay, H. M. ORCID: 0000-0003-1588-9677, Midmer, A. S., Jagadeesh, C. , Finnerty, A. M., Evans, T. & Vaissiere, C. (2024). An Experimental Study on the Aerodynamic Performance of a Novel Laminar-Flow-Enabling Snap-Fit Seal. In: AIAA AVIATION FORUM AND ASCEND 2024. AIAA AVIATION FORUM AND ASCEND 2024, 29 Jul - 02 Aug 2024, Las Vegas, USA. doi: 10.2514/6.2024-4129
Rane, S. ORCID: 0000-0002-8732-2242, Kovačević, A. ORCID: 0000-0002-8732-2242 & Read, M. ORCID: 0000-0002-7753-2457 (2024). Development of Numerical Grid and CFD Model for Analysis of Oil-Injected IGSM. In: Read, M. ORCID: 0000-0002-7753-2457, Rane, S. ORCID: 0000-0002-8732-2242, Ivkovic-Kihic, I. & Kovačević, A. ORCID: 0000-0002-8732-2242 (Eds.), 13th International Conference on Compressors and Their Systems. 13th International Conference on Compressors and Their Systems, 11-13 Sep 2023, London, UK. doi: 10.1007/978-3-031-42663-6_41
Ravikumar, B. (2024). Molecular dynamics modelling of complex-rheology heat transfer liquids. (Unpublished Doctoral thesis, City, University of London)
Read, M. ORCID: 0000-0002-7753-2457 (2024). A methodology for investigating the influence of hydrodynamic effects in gerotor type positive displacement machines. Mechanism and Machine Theory, 204, article number 105836. doi: 10.1016/j.mechmachtheory.2024.105836
Roldan, M., Abay, T. Y., Uff, C. & Kyriacou, P. ORCID: 0000-0002-2868-485X (2024). A pilot clinical study to estimate intracranial pressure utilising cerebral photoplethysmograms in traumatic brain injury patients. Acta Neurochirurgica, 166(1), article number 109. doi: 10.1007/s00701-024-06002-4
Rondao, D. ORCID: 0000-0001-9438-0267, He, L. ORCID: 0000-0003-3028-6305 & Aouf, N. ORCID: 0000-0001-9291-4077 (2024). AI-based monocular pose estimation for autonomous space refuelling. Acta Astronautica, 220, pp. 126-140. doi: 10.1016/j.actaastro.2024.04.003
Sabaliauskaite, G., Divall, S. ORCID: 0000-0001-9212-5115, McNamara, A. ORCID: 0000-0002-3452-0800 , Stallebrass, S. E. ORCID: 0000-0002-3747-9524 & Taylor, N. ORCID: 0000-0002-8103-0433 (2024). Rough pile stereolithography for centrifuge modelling. In: Guerra, N., Matos Fernandes, M., Ferreira, C. , Gomes Correia, A., Pinto, A. & Pinto, P. S. (Eds.), Geotechnical Engineering Challenges to Meet Current and Emerging Needs of Society. XVIII European Conference on Soil Mechanics and Geotechnical Engineering, 26-30 Aug 2024, Lisbon, Portugal. doi: 10.1201/9781003431749-504
Sabaliauskaite, G., Divall, S. ORCID: 0000-0001-9212-5115, McNamara, A. M. ORCID: 0000-0002-3452-0800 , Stallebrass, S. E. ORCID: 0000-0002-3747-9524 & Taylor, N. ORCID: 0000-0002-8103-0433 (2024). An investigation into the effects of pile stiffness on pile working load capacity utilising novel modelling techniques. Paper presented at the 5th European Conference on Physical Modelling in Geotechnics (ECPMG 2024), 2-4 Oct 2024, Delft, Netherlands.
Sabaliauskaite, G., Stallebrass, S. E. ORCID: 0000-0002-3747-9524, McNamara, A. M. ORCID: 0000-0002-3452-0800 , Taylor, N. ORCID: 0000-0002-8103-0433, Divall, S. ORCID: 0000-0001-9212-5115 & Panchal, J. (2024). Centrifuge modelling of hollow heated piles in saturated sand. In: Guerra, N., Matos Fernandes, M., Ferreira, C. , Gomes Correia, A., Pinto, A. & Pinto, P. S. (Eds.), Geotechnical Engineering Challenges to Meet Current and Emerging Needs of Society. XVIII European Conference on Soil Mechanics and Geotechnical Engineering, 26-30 Aug 2024, Lisbon, Portugal. doi: 10.1201/9781003431749-648
Salah, S. I., Abdeldayem, A. S., White, M. ORCID: 0000-0002-7744-1993 & Sayma, A. I. ORCID: 0000-0003-2315-0004 (2024). Off-design performance assessment of an axial turbine for a 100 MWe concentrated solar power plant operating with CO2 mixtures. Applied Thermal Engineering, 238, article number 122001. doi: 10.1016/j.applthermaleng.2023.122001
Santos, E., Ferreira, F. P. V., Martins, C. H. & Tsavdaridis, K. ORCID: 0000-0001-8349-3979 (2024). Finite Element Analysis of Steel-Concrete Composite Beams with Elliptically-Based Web Openings. Paper presented at the International Conference on Steel and Aluminium Structures (ICSAS 2024), 5-7 Jun 2024, Rio de Janeiro, Brazil.
Santos, E., Martins, C. H., Ferreira, F. P. V. , Tsavdaridis, K. ORCID: 0000-0001-8349-3979 & Cardoso, H. S. (2024). Lateral-Torsional Buckling Resistance Prediction of High-Strength SteelI-Beams with Sinusoidal Web Openings. In: The 10th International Conference on Steel and Aluminium Structures (ICSAS 2024). International Conference on Steel and Aluminium Structures (ICSAS 2024), 5-7 Jun 2024, Rio de Janeiro, Brazil.
Shams, A., Bidi, S. & Gavaises, M. ORCID: 0000-0003-0874-8534 (2024). Investigation of the ultrasound-induced collapse of air bubbles near soft materials.. Ultrasonics Sonochemistry, 102, article number 106723. doi: 10.1016/j.ultsonch.2023.106723
Sharifi, A., Omidyeganeh, M. & Masdari, M. ORCID: 0000-0002-1159-2406 (2024). Exploring submergence impact on flow-induced motion energy-harvesting with circular-triangular prisms. Journal of Ocean Engineering and Marine Energy, doi: 10.1007/s40722-024-00351-z
Soltanieh, S. (2024). Robust Optimum Seismic Design of Reinforced Concrete Bridges. (Unpublished Doctoral thesis, City, University of London)
Sriram, V., Saincher, S., Yan, S. ORCID: 0000-0001-8968-6616 & Ma, Q. W. ORCID: 0000-0001-5579-6454 (2024). The past, present and future of multi-scale modelling applied to wave–structure interaction in ocean engineering. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 382(2281), article number 20230316. doi: 10.1098/rsta.2023.0316
Srivastava, C., Mahesh, V., Guruprasad, P. J. , Petrinic, N., Scarpa, F., Harursampath, D. & Ponnusami, S. A. ORCID: 0000-0002-2143-8971 (2024). Effect of damage evolution on the auxetic behavior of 2D and 3D re-entrant type geometries. Mechanics of Materials, 193, article number 104980. doi: 10.1016/j.mechmat.2024.104980
Taghinezhad, J., Alimardani, R., Masdari, M. ORCID: 0000-0002-1159-2406 & Mosazadeh, H. (2024). Parametric study and flow characteristics of a new duct for ducted wind turbines system using analytical hierarchy process: numerical & experimental study. Energy Systems, 15(2), pp. 585-614. doi: 10.1007/s12667-022-00500-z
Tsavdaridis, K. ORCID: 0000-0001-8349-3979 & Corfar, D-A. (2024). Insights into the cyclic behaviour of novel hybrid inter-module joints under lateral load. Paper presented at the International Conference on Steel and Aluminium Structures (ICSAS 2024), 5-7 Jun 2024, Rio de Janeiro, Brazil.
Tsavdaridis, K. ORCID: 0000-0001-8349-3979 & Corfar, D. A. ORCID: 0000-0002-9843-2973 (2024). Cyclic tests on hybrid inter-module joints with high-damping rubber. In: The 11th International Conference on the Behaviour of Steel Structures in Seismic Areas (STESSA 2024). International Conference on the Behaviour of Steel Structures in Seismic Areas (STESSA 2024), 8-10 Jul 2024, Salerno, Italy.
Tsavdaridis, K. ORCID: 0000-0001-8349-3979, Giaralis, A. ORCID: 0000-0002-2952-1171, Wang, Z. & Ferreira, F. P. V. (2024). Vibration Response of Ultra-Shallow Floor Beam (USFB) Composite Floors. Proceedings of the Institution of Civil Engineers: Structures and Buildings, pp. 1-13. doi: 10.1680/jstbu.23.00043
Tsavdaridis, K. ORCID: 0000-0001-8349-3979, McKinley, B., Corfar, D. A. & Lawson, R. M. (2024). Cellular Beam End-Posts with Two Connection Types, End Notches and Infill Plates. Journal of Constructional Steel Research, 215, article number 108547. doi: 10.1016/j.jcsr.2024.108547
Tsavdaridis, K. ORCID: 0000-0001-8349-3979, McKinley, B., Kacaroglu, B. N. , Corfar, D. ORCID: 0000-0002-9843-2973 & Lawson, R. M. (2024). Bending Test of Long-Span Ultra-Shallow Floor Beam (USFB) with Two Lightweight Concretes. Structures, 66, article number 106895. doi: 10.1016/j.istruc.2024.106895
Ucur, M., Divall, S. ORCID: 0000-0001-9212-5115, Stallebrass, S. E. ORCID: 0000-0002-3747-9524 , Taylor, N. ORCID: 0000-0002-8103-0433, Davies, M. C. R. & McNamara, A. M. ORCID: 0000-0002-3452-0800 (2024). Development of apparatus of modelling a "shaft break-out" in clay. Paper presented at the 5th European Conference on Physical Modelling in Geotechnics (ECPMG 2024), 2-4 Oct 2024, Delft, Netherlands.
Uthman, M. & Rahman, B. M. A. ORCID: 0000-0001-6384-0961 (2024). Design of uncomplicated triangular core PCF for enhanced non-linearity applications. e-Prime - Advances in Electrical Engineering, Electronics and Energy, 8, article number 100509. doi: 10.1016/j.prime.2024.100509
Verma, S., Pathak, A. K. & Rahman, B. M. A. ORCID: 0000-0001-6384-0961 (2024). Review of Biosensors Based on Plasmonic-Enhanced Processes in the Metallic and Meta-Material-Supported Nanostructures. Micromachines, 15(4), article number 502. doi: 10.3390/mi15040502
Wang, C. & Aouf, N. ORCID: 0000-0001-9291-4077 (2024). Depth-Enhanced Deep Learning Approach For Monocular Camera Based 3D Object Detection. Journal of Intelligent & Robotic Systems, 110(3), article number 101. doi: 10.1007/s10846-024-02128-w
Wang, L., Gong, J., Yan, S. ORCID: 0000-0001-8968-6616 , Ma, Q. ORCID: 0000-0001-5579-6454 & Xu, J. (2024). Numerical Simulation of the Interaction Between FOWT and Focused Wave by a Hybrid Method. International Journal of Offshore and Polar Engineering, 34(3), pp. 273-282. doi: 10.17736/ijope.2024.sv14
Wang, Y., Liu, F., Yang, H. , Fu, F. ORCID: 0000-0002-9176-8159 & Yan, Y. (2024). Thermal insulation performance of non-load-bearing light gauge slotted steel stud walls. Sustainable Structures, 4(1), article number 42. doi: 10.54113/j.sust.2024.000042
Wang, Z. ORCID: 0000-0003-0481-6341 & Aouf, N. (2024). Efficient adversarial attacks detection for deep reinforcement learning-based autonomous planetary landing GNC. Acta Astronautica, 224, pp. 37-47. doi: 10.1016/j.actaastro.2024.07.052
Wang, Z., Giaralis, A. ORCID: 0000-0002-2952-1171, Daniels, S. , He, M., Margnelli, A. & Jagadeesh, C. (2024). Enhancing accuracy of surface wind sensors in wind tunnel Testing: A Physics-Guided neural network calibration approach. Measurement, 234, article number 114812. doi: 10.1016/j.measurement.2024.114812
Werner, J., Belz, M., Klein, K-F. , Sun, T. ORCID: 0000-0003-3861-8933 & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2024). Evaluation and optimization of the performance characteristics of fast response fiber optic oxygen gas probes. Sensors and Actuators A: Physical, 365, article number 114933. doi: 10.1016/j.sna.2023.114933
Xiao, Q., Calvert, R., Yan, S. Q. ORCID: 0000-0001-8968-6616 , Adcock, T. A. A. & van den Bremer, T. S. (2024). Surface gravity wave-induced drift of floating objects in the diffraction regime. Journal of Fluid Mechanics, 980, article number A27. doi: 10.1017/jfm.2024.31
Xu, G., Zhou, Y., Yan, S. ORCID: 0000-0001-8968-6616 & Yuan, S. (2024). Spatial energy evolution of focused waves generated in numerical wave tank. Applied Ocean Research, 148, article number 104015. doi: 10.1016/j.apor.2024.104015
Yang, G., Kang, Y., Charlton, P. H. , Kyriacou, P. A. ORCID: 0000-0002-2868-485X, Kim, K. K., Li, L. & Park, C. (2024). Energy-Efficient PPG-Based Respiratory Rate Estimation Using Spiking Neural Networks. Sensors, 24(12), article number 3980. doi: 10.3390/s24123980
Yang, L., Jin, Q. & Fu, F. ORCID: 0000-0002-9176-8159 (2024). Research on Urban Street Network Structure Based on Spatial Syntax and POI Data. Sustainability, 16(5), article number 1757. doi: 10.3390/su16051757
Yang, Y-F., Fu, F. ORCID: 0000-0002-9176-8159 & Liu, M. (2024). Cyclic Behavior of Four-Limbed Circular CFST Latticed Beam- Columns. Journal of Structural Engineering, 150(3), article number 04024006. doi: 10.1061/JSENDH.STENG-13073
Yang, Y., Zhang, Y-Q. & Fu, F. ORCID: 0000-0002-9176-8159 (2024). Flexural behaviour of rectangular double-opening concrete filled sandwich steel tube (DCFSST) beams. Journal of Constructional Steel Research, 215, article number 108512. doi: 10.1016/j.jcsr.2024.108512
Yazdaninejad, H., Rajarajan, M. ORCID: 0000-0001-5814-9922 & Krol, M. ORCID: 0000-0002-3437-8621 (2024). A Blockchain-enabled and Transparent Evaluation of ML Models in the Decentralised Marketplace. In: 2024 IEEE International Conference on Blockchain (Blockchain). 2024 IEEE International Conference on Blockchain (Blockchain), 19-22 Aug 2024, Copenhagen, Denmark. doi: 10.1109/blockchain62396.2024.00067
Zanelli, S. ORCID: 0000-0002-8020-8375, Agnoletti, D., Alastruey, J. , Allen, J. ORCID: 0000-0002-7263-0533, Bianchini, E., Bikia, V., Boutouyrie, P., Bruno, R. M., Climie, R., Djamaleddine, D., Gkaliagkousi, E., Giudici, A. ORCID: 0000-0002-8288-3980, Gopcevic, K., Grillo, A., Guala, A., Hametner, B. ORCID: 0000-0003-2048-1019, Joseph, J., Karimpour, P., Kodithuwakku, V., Kyriacou, P. A. ORCID: 0000-0002-2868-485X, Lazaridis, A., Lonnebakken, M. T., Martina, M. R. ORCID: 0000-0003-2489-8639, Mayer, C. C. ORCID: 0000-0002-5612-5481, Nabeel, P. M., Navickas, P., Nemcsik, J., Orter, S. ORCID: 0000-0001-9258-6069, Park, C., Pereira, T., Pucci, G., Amado Rey, A. B., Salvi, P., Gonçalves Seabra, A. C., Seeland, U., van Sloten, T., Spronck, B. ORCID: 0000-0003-1076-1922, Stansby, G., Steens, I., Stieglitz, T., Tan, I., Veerasingam, D., Wassertheurer, S., Weber, T., Westerhof, B. E. & Charlton, P. H. ORCID: 0000-0003-3836-8655 (2024). Developing technologies to assess vascular ageing: a roadmap from VascAgeNet. Physiological Measurement, doi: 10.1088/1361-6579/ad548e
Zeng, R., Bao, E-H., Yin, X. & Fu, F. ORCID: 0000-0002-9176-8159 (2024). The Behavior of Post-installed Rebar Connectors in Steel Frame Retrofitted Concrete Structures Under Combined Shear and Tension. International Journal of Concrete Structures and Materials, 18(1), article number 61. doi: 10.1186/s40069-024-00700-0
Zhang, N., Ma, Q. ORCID: 0000-0001-5579-6454, Yan, S. ORCID: 0000-0001-8968-6616 & Li, Q. (2024). A GNN supported ISPH method for numerical simulation of wave interaction with fixed structures. In: Proceedings of the International Offshore and Polar Engineering Conference. 34th International Ocean and Polar Engineering Conference, 16–21 Jun 2024, Rhodes, Greece.
Zhang, N., Yan, S. ORCID: 0000-0001-8968-6616, Ma, Q. ORCID: 0000-0001-5579-6454 , Khayyer, A., Guo, X. & Zheng, X. (2024). A Consistent Second Order ISPH for Free Surface Flow. Computers & Fluids, 274, article number 106224. doi: 10.1016/j.compfluid.2024.106224
Zhang, N., Yan, S. ORCID: 0000-0001-8968-6616, Ma, Q. ORCID: 0000-0001-5579-6454 & Li, Q. (2024). A hybrid method combining ISPH with graph neural network for simulating free-surface flows. Computer Physics Communications, 301, article number 109220. doi: 10.1016/j.cpc.2024.109220
Zhu, Z., Chekakta, Z. ORCID: 0000-0002-4664-6283 & Aouf, N. ORCID: 0000-0001-9291-4077 (2024). Collaborative SLAM with Convolutional Neural Network-based Descriptor for Inter-Map Loop Closure Detection. In: 2024 10th International Conference on Automation, Robotics and Applications (ICARA). 2024 10th International Conference on Automation, Robotics and Applications (ICARA), 22-24 Feb 2024, Athesn, Greece. doi: 10.1109/icara60736.2024.10553178
2023
Abdan, S., Patil, S., Stosic, N. ORCID: 0000-0001-8034-4046 , Kovacevic, A. ORCID: 0000-0002-8732-2242 & Smith, I. (2023). Experimental validation of the screw compressor oil drag model for various rotor profiles. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, doi: 10.1177/09544089231163514
Abdeldayem, A. (2023). Simulation and loss investigation of large-scale axial turbines operating with supercritical carbon dioxide mixtures. (Unpublished Doctoral thesis, City, University of London)
Abdeldayem, A., Paggini, A., Diurno, T. , Orazi, C., White, M. ORCID: 0000-0002-7744-1993, Ruggiero, M. & Sayma, A. I. ORCID: 0000-0003-2315-0004 (2023). Integrated Aerodynamic and Mechanical Design of a Large-Scale Axial Turbine Operating With Supercritical Carbon Dioxide Mixtures. In: Proceedings of the ASME Turbo Expo 2023. ASME Turbo Expo 2023: Turbomachinery Technical Conference and Exposition, 26-30 Jun 2023, Boston, USA. doi: 10.1115/GT2023-102236
Abdeldayem, A., Salah, S., Aqel, O. , White, M. ORCID: 0000-0002-7744-1993 & Sayma, A. I. ORCID: 0000-0003-2315-0004 (2023). Design of a 130 MW axial turbine operating with a supercritical carbon dioxide mixture for the SCARABEUS project. In: European Conference on Turbomachinery Fluid Dynamics and Thermodynamics, ETC. 15th European Conference on Turbomachinery Fluid dynamics & Thermodynamics, 24-28 Apr 2023, Budapest, Hungary.
Abdeldayem, A. S., Salah, S. I., White, M. T. ORCID: 0000-0002-7744-1993 & Sayma, A. I. ORCID: 0000-0003-2315-0004 (2023). A Modified Loss Breakdown Approach for Axial Turbines Operating With Blended Supercritical Carbon Dioxide. Journal of Engineering for Gas Turbines and Power, 145(8), article number 081002. doi: 10.1115/1.4062478
Abdulsalam, M. (2023). Artificial Intelligence based Robotic Platforms for Autonomous Precision Agriculture. (Unpublished Doctoral thesis, City, University of London)
Abdulsalam, M., Chekakta, Z. ORCID: 0000-0002-4664-6283, Aouf, N. ORCID: 0000-0001-9291-4077 & Hogan, M. (2023). Fruity: A Multi-modal Dataset for Fruit Recognition and 6D-Pose Estimation in Precision Agriculture. In: 2023 31st Mediterranean Conference on Control and Automation (MED). 2023 31st Mediterranean Conference on Control and Automation (MED), 26-29 Jun 2023, Limassol, Cyprus. doi: 10.1109/med59994.2023.10185851
Abuhaiba, A. ORCID: 0009-0008-4076-4888, Assadi, M., Apostolopoulou, D. ORCID: 0000-0002-9012-9910 , Al-Zaili, J. ORCID: 0000-0003-4072-2107 & Sayma, A. I. ORCID: 0000-0003-2315-0004 (2023). Power Transmission and Control in Microturbines’ Electronics: A Review. Energies, 16(9), article number 3901. doi: 10.3390/en16093901
Afshari, P., Pavlyuk, M., Lira, C. , Katnam, K-B., Bodaghi, M. & Yazdani Nezhad, H. ORCID: 0000-0003-0832-3579 (2023). Mechanical Strain Tailoring via Magnetic Field Assisted 3D Printing of Iron Particles Embedded Polymer Nanocomposites. Macromolecular Materials and Engineering, 308(11), article number 2300194. doi: 10.1002/mame.202300194
Ahmed, T. ORCID: 0000-0001-5760-1964, Qassem, M. ORCID: 0000-0003-0730-3189 & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2023). Measuring stress: a review of the current cortisol and dehydroepiandrosterone (DHEA) measurement techniques and considerations for the future of mental health monitoring. Stress, 26(1), pp. 29-42. doi: 10.1080/10253890.2022.2164187
Aithal, N. U., Mahesh, V., Mahesh, V. ORCID: 0000-0001-8394-1321 , Ponnusami, S. A. ORCID: 0000-0002-2143-8971 & Harursampath, D. (2023). Development and mechanical characterization of cenosphere-reinforced CFRP and natural rubber core sandwich composite. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 45(9), article number 498. doi: 10.1007/s40430-023-04424-2
Al-Halawani, R., Charlton, P. H., Qassem, M. ORCID: 0000-0003-0730-3189 & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2023). A review of the effect of skin pigmentation on pulse oximeter accuracy. Physiological Measurement, 44(5), article number 05TR01. doi: 10.1088/1361-6579/acd51a
Alali, A. & Tsavdaridis, K. ORCID: 0000-0001-8349-3979 (2023). Flexural Behaviour of Prefabricated Ultra-Shallow Composite (PUSS®) Slabs with Horizontally Oriented Shear Connectors. Paper presented at the The 10th Hellenic National Conference of Steel Structures, 19-21 Oct 2023, Athens, Greece.
Almutairi, F. F. & Tsavdaridis, K. ORCID: 0000-0001-8349-3979 (2023). FEA validation on the degree of composite action of composite reduced web section (RWS) connections under cyclic loading. Paper presented at the The 10th Hellenic National Conference of Steel Structures, 19 Oct 2023, Athens, Greece.
Almutairi, F. F., Tsavdaridis, K. ORCID: 0000-0001-8349-3979 & Alonso- Rodriguez, A. (2023). Hysteretic performance of Reduced Web Section (RWS) connections with demountable slabs and effect of composite action. Paper presented at the Earthquake Engineering & Dynamics for A Sustainable Future (SECED2023), 14-15 Sep 2023, Cambridge, UK.
Almutairi, F. F., Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979, Alonso-Rodriguez, A. & Hajirasouliha, I. (2023). Experimental investigation using demountable steel-concrete composite reduced web section (RWS) connections under cyclic loads. Bulletin of Earthquake Engineering, 22(3), pp. 1081-1110. doi: 10.1007/s10518-023-01802-y
Almutairi, F., Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979, Rodriguez, A. , Asteris, P. & Lemonis, M. (2023). Hysteretic Behaviour of Composite Reduced Web Section (RWS) Connections for Seismic Applications. Journal of Earthquake Engineering, 28(2), pp. 349-384. doi: 10.1080/13632469.2023.2204172
Alotta, G., Biondo, C., Giaralis, A. ORCID: 0000-0002-2952-1171 & Failla, G. (2023). Seismic protection of land-based wind turbine towers using the tuned inerter damper. Structures, 51, pp. 640-656. doi: 10.1016/j.istruc.2023.03.004
Amend, M. (2023). Cost optimized multipath transmission of bursty video traffic in 5G multi-access network architecture. (Unpublished Doctoral thesis, City, University of London)
Ananda, A. (2023). Wrist Fractures Analysis as observed with X-ray imaging. (Unpublished Doctoral thesis, City, University of London)
Aqel, O. (2023). Optimisation of cycle and turbine designs for transcritical cycles of CO2-based working fluids. (Unpublished Doctoral thesis, City, University of London)
Aqel, O., White, M. ORCID: 0000-0002-7744-1993 & Sayma, A. I. ORCID: 0000-0003-2315-0004 (2023). Loss Analysis in Radial Inflow Turbines for Supercritical CO2 Mixtures. In: Proceedings of the ASME Turbo Expo. ASME Turbo Expo 2023: Turbomachinery Technical Conference and Exposition, 26-30 Jun 2023, Boston, USA. doi: 10.1115/GT2023-102556
Balatti, D., Khodaparast, H. H., Friswell, M. I. , Manolesos, M. ORCID: 0000-0002-5506-6061 & Castrichini, A. (2023). Experimental and numerical investigation of an aircraft wing with hinged wingtip for gust load alleviation. Journal of Fluids and Structures, 119, article number 103892. doi: 10.1016/j.jfluidstructs.2023.103892
Bandyopadhyay, S., Fabian, M., Li, K. , Sun, T. ORCID: 0000-0003-3861-8933 & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2023). Fiber-Bragg-Grating-Based Sensor System to Measure Battery State of Charge Based on a Machine Learning Model. Batteries, 9(10), article number 508. doi: 10.3390/batteries9100508
Baran, O., Karathanassis, I. K. ORCID: 0000-0001-9025-2866, Koukouvinis, P. , Hwang, J., Pickett, L. M., Spivey, D. & Gavaises, M. ORCID: 0000-0003-0874-8534 (2023). Assessment of injector-flow characteristics of additised and renewable diesel blends through high-speed imaging. Fuel, 352, article number 129076. doi: 10.1016/j.fuel.2023.129076
Bashir, M. N., Haseeb, A. S. M. A., Naher, S. ORCID: 0000-0003-2047-5807 , Ali, M. M., Ali Bashir, M. B., Zaidi, A. A., Jamshaid, M. & Javed, I. (2023). Effects of cobalt nanoparticle on microstructure of Sn58Bi solder joint. Journal of Materials Science: Materials in Electronics, 34(4), article number 248. doi: 10.1007/s10854-022-09465-2
Bedi, S. S., Mallesha, V., Mahesh, V. ORCID: 0000-0001-8394-1321 , Mahesh, V., Mukunda, S., Negi, S. & Ponnusami, S. A. ORCID: 0000-0002-2143-8971 (2023). Thermal characterization of 3D printable multifunctional graphene‐reinforced polyethylene terephthalate glycol (PETG) composite filaments enabled for smart structural applications. Polymer Engineering & Science, 63(9), pp. 2841-2856. doi: 10.1002/pen.26409
Bedi, S. S., Mallesha, V., Mahesh, V. , Mahesh, V. & Ponnusami, S. A. ORCID: 0000-0002-2143-8971 (2023). Investigation of low-percentage graphene reinforcement on the mechanical behaviour of additively manufactured polyethylene terephthalate glycol composites. Journal of Thermoplastic Composite Materials, 37(3), pp. 910-930. doi: 10.1177/08927057231188025
Beemer, R., Fonseca, J. ORCID: 0000-0002-7654-6005 & Shaw, J. (2023). Non-invasive characterization of particle morphology of calcareous sands from São Tomé & Príncipe. In: Proceedings of the 8th International Symposium on Deformation Characteristics of Geomaterials (ISDCG2023). IS-PORTO 2023: 8th International Symposium on Deformation Characteristics of Geomaterials, 3-6 Sep 2023, Porto, Portugal.
Bidi, S., Shams, A., Koukouvinis, P. & Gavaises, M. ORCID: 0000-0003-0874-8534 (2023). Prediction of shock heating during ultrasound-induced bubble collapse using real-fluid equations of state. Ultrasonics Sonochemistry, 101, article number 106663. doi: 10.1016/j.ultsonch.2023.106663
Bigdeli, A. Z., Emamikoupaei, A. & Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 (2023). Probabilistic seismic demand model and optimal intensity measures for mid-rise Steel Modular Building Systems (MBS) under near-field ground motions. Journal of Building Engineering, 67, article number 105916. doi: 10.1016/j.jobe.2023.105916
Boiarkin, V., Zarpelao, B. B., Rajarajan, M. ORCID: 0000-0001-5814-9922 , Roy, R. & Tapper, K. ORCID: 0000-0001-9097-6311 (2023). Local Differential Privacy-Based Data-Sharing Scheme for Smart Utilities. In: Proceedings of the 20th International Conference on Manufacturing Research. 20th International Conference on Manufacturing Research, 6-8 Sep 2023, Aberystwyth, UK. doi: 10.3233/atde230930
Boiarkin, V., Rajarajan, M. ORCID: 0000-0001-5814-9922, Al-Zaili, J. ORCID: 0000-0003-4072-2107 & Asif, W. (2023). A novel dynamic pricing model for a microgrid of prosumers with photovoltaic systems. Applied Energy, 342, article number 121148. doi: 10.1016/j.apenergy.2023.121148
Bradley, G. R. E., Roldán, M. & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2023). Machine Learning Approaches to Intracranial Pressure Prediction in Patients with Traumatic Brain Injury: A Systematic Review. Applied Sciences, 13(14), article number 8015. doi: 10.3390/app13148015
Brokof, P., Guzmán-Iñigo, J. ORCID: 0000-0002-1833-6034, Morgans, A. S. , Son, M., Armbruster, W. & Hardi, J. S. (2023). Injection-Coupling Instabilities in the BKD Combustor: Acoustic Analysis of the Isolated Injectors. AIAA Journal, 61(6), pp. 2581-2590. doi: 10.2514/1.j062507
Brokof, P., Guzmán-Iñigo, J. ORCID: 0000-0002-1833-6034, Yang, D. & Morgans, A. S. (2023). The acoustics of short circular holes with reattached bias flow. Journal of Sound and Vibration, 546(3), article number 117435. doi: 10.1016/j.jsv.2022.117435
Brooks, S. J., Mahmood, M., Roy, R. , Manolesos, M. ORCID: 0000-0002-5506-6061 & Salonitis, K. (2023). Self-reconfiguration simulations of turbines to reduce uneven farm degradation. Renewable Energy, 206, pp. 1301-1314. doi: 10.1016/j.renene.2023.02.064
Brown, N. H. (2023). The Multiple Scales Method for Non-parallel Three-Dimensional Stability Analysis in Boundary Layers. (Unpublished Doctoral thesis, City, University of London)
Cabrera, F. ORCID: 0000-0001-7915-0711 & Rahman, A. ORCID: 0000-0001-6384-0961 (2023). Optical and Electrical Analyses of Solar Cells with a Radial PN Junction and Incorporating an Innovative NW Design That Mimics ARC Layers. Nanomaterials, 13(10), article number 1649. doi: 10.3390/nano13101649
Cai, B., Li, K. & Fu, F. ORCID: 0000-0002-9176-8159 (2023). Flexural behavior of steel fiber-reinforced coal gangue aggregate concrete beams. Structures, 52, pp. 131-145. doi: 10.1016/j.istruc.2023.03.172
Cai, B., Li, K. & Fu, F. ORCID: 0000-0002-9176-8159 (2023). Theoretical analysis of the moment-curvature relationship of coal gangue concrete beams. Proceedings of the Institution of Civil Engineers - Structures and Buildings, 177(8), pp. 728-748. doi: 10.1680/jstbu.22.00066
Cai, B., Wang, S., Fu, F. ORCID: 0000-0002-9176-8159 , Duan, W. & Wang, L. (2023). Experimental Study on Steel-Fiber-Reinforced Scoria Aggregate Concrete Subjected to Freeze-Thaw Cycles and Then Exposure to Elevated Temperatures. Fire, 6(3), article number 119. doi: 10.3390/fire6030119
Camara, A., Fernandez-Elvira, L. E., Stroumpouli, C. & Jagadeesh, C. (2023). Skew wind actions on vehicles crossing bridges with solid parapets. Journal of Wind Engineering and Industrial Aerodynamics, 240, article number 105485. doi: 10.1016/j.jweia.2023.105485
Cao, X., Quan, Y-p., Ren, Y-c. , Fu, F. ORCID: 0000-0002-9176-8159, Jin, Q-z., He, D-b. & Zheng, Y. (2023). Experiment study on reactive powder concrete beams using spirals reinforcement under torsion. Engineering Structures, 290, article number 116361. doi: 10.1016/j.engstruct.2023.116361
Cao, X., Zhang, W-J., Ren, Y-C. , Fu, F. ORCID: 0000-0002-9176-8159, Li, Y-h., He, D-B. & Zheng, Y. (2023). Torsional capacity of ultra-high-performance concrete beams using rectangle stirrup. Journal of Building Engineering, 69, article number 106231. doi: 10.1016/j.jobe.2023.106231
Charlton, P. H., Allen, J., Bailon, R. , Baker, S., Behar, J. A., Chen, F., Clifford, G. D., Clifton, D. A., Davies, H. J., Ding, C., Ding, X., Dunn, J., Elgendi, M., Ferdoushi, M., Franklin, D., Gil, E., Hassan, M. F., Hernesniemi, J., Hu, X., Ji, N., Khan, Y., Kontaxis, S., Korhonen, I., Kyriacou, P. A. ORCID: 0000-0002-2868-485X, Laguna, P., Lazaro, J., Lee, C., Levy, J., Li, Y., Liu, C., Liu, J., Lu, L., Mandic, D. P., Marozas, V., Mejía-Mejía, E., Mukkamala, R., Nitzan, M., Pereira, T., Poon, C. C. Y., Ramella-Roman, J. C., Saarinen, H., Shandhi, M. M. H., Shin, H., Stansby, G., Tamura, T., Vehkaoja, A., Wang, W. K., Zhang, Y-T., Zhao, N., Zheng, D. & Zhu, T. (2023). The 2023 wearable photoplethysmography roadmap. Physiological Measurement, 44(11), article number 111001. doi: 10.1088/1361-6579/acead2
Chen, X. (2023). Study of Arc-Discharge Plasma Actuators for the Control of Shock-Wave Boundary-Layer Interaction. (Unpublished Doctoral thesis, City, University of London)
Colas, E., Klopries, E-M., Tian, D. , Kroll, M., Selzner, M., Bruecker, C. ORCID: 0000-0001-5834-3020, Khaledi, K., Kukla, P., Preuße, A., Sabarny, C., Schüttrumpf, H. & Amann, F. (2023). Overview of converting abandoned coal mines to underground pumped storage systems: Focus on the underground reservoir. Journal of Energy Storage, 73(D), article number 109153. doi: 10.1016/j.est.2023.109153
Corfar, D. A. & Tsavdaridis, K. ORCID: 0000-0001-8349-3979 (2023). Proof-of-Concept Finite Element Analysis of a Novel Hybrid Inter-Module Connection. Paper presented at the The 17th Computational Civil Engineering (CCE 2023) - Embedding Digital and Green for Resilient Constructions, 24-25 May 2023, Iasi, Romania.
Corfar, D. A. & Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 (2023). A Hybrid Inter-Module Connection for Steel Modular Building Systems with SMA and High-Damping Rubber Components. Engineering Structures, 289, article number 116281. doi: 10.1016/j.engstruct.2023.116281
Court, A., Selim, O., Pamment, K. & Bruecker, C. ORCID: 0000-0001-5834-3020 (2023). Design and implementation of spanwise lift and gust control via arrays of bio-inspired individually actuated pneumatic flaplets. International Journal of Numerical Methods for Heat and Fluid Flow, 33(4), pp. 1528-1543. doi: 10.1108/hff-01-2023-0046
Cárdenas Miranda, A., Dahlhaus, J., Dordevic, O. , Eckhardt, J., Faessler, V., Le-Peuvedic, J-M., Riley, P. H. ORCID: 0000-0002-1580-7689 & Wasner, J. (2023). LiBAT: A High-Performance AC Battery System for Transport Applications. Designs, 7(3), article number 74. doi: 10.3390/designs7030074
De Falco, N., Bilotta, E., Divall, S. ORCID: 0000-0001-9212-5115 & Goodey, R.J. (2023). Numerical analysis of deep ground movements induced by circular shaft construction. In: Rahman, M. & Jaksa, M. (Eds.), Proceedings of the 20th International Conference on Soil Mechanics and Geotechnical Engineering. 20th International Conference on Soil Mechanics and Geotechnical Engineering 2022, 01-05 May 2022, Sydney, Australia.
Deihim, A., Alonso, E. ORCID: 0000-0002-3306-695X & Apostolopoulou, D. ORCID: 0000-0002-9012-9910 (2023). STTRE: A Spatio-Temporal Transformer with Relative Embeddings for Multivariate Time Series Forecasting. Neural Networks, 168, pp. 549-559. doi: 10.1016/j.neunet.2023.09.039
Divall, S. ORCID: 0000-0001-9212-5115, Goodey, R. J., Davies, M. C. R. , Le, B. T. & Nguyen, T. T. T. (2023). Twin-tunnelling: Case studies in clay. Journal of Mining and Earth Sciences, 64(6), pp. 66-78. doi: 10.46326/jmes.2023.64(6).08
Divya, M., Senthilkumar, R., George, P. , Jayabalan, P., Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 & Bahurudeen, A. (2023). Development of Novel Shear Connectors for Cold-Formed Steel Concrete Composite Beams. Construction and Building Materials, 387, article number 131644. doi: 10.1016/j.conbuildmat.2023.131644
Dong, H., Sui, M., Mu, G. , Zhao, J., Li, T., Sun, T. ORCID: 0000-0003-3861-8933 & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2023). Velocity and Direction Adjustment of Actuated Droplets Using the Standing Wave Ratio of Surface Acoustic Waves (SAW). IEEE/ASME Transactions on Mechatronics, 28(4), pp. 2399-2404. doi: 10.1109/tmech.2023.3237664
Doran, T., Owhal, A., Roy, T. , Belgamwar, S. U., Goel, S., Yazdani Nezhad, H. ORCID: 0000-0003-0832-3579 & Mishra, R. (2023). Thermo-physical characteristics of 3C-SiC structure subjected to microwave exposure: A molecular dynamics study. Materials Today Communications, 35, article number 105693. doi: 10.1016/j.mtcomm.2023.105693
Duarte Martinez, F., Syed, A., Dawson, K. , Tatlock, G. J., Morar, N. ORCID: 0000-0001-9109-8864, Kothari, M., Tang, C., Leggett, J., Mason-Flucke, J. C., Gibson, G., Nicholls, J. R., Gray, S. & Castelluccio, G. M. (2023). Effect of NaCl and SO2 on the stress corrosion cracking of CMSX-4 at 550°C. Materials at High Temperatures, 40(4), pp. 283-295. doi: 10.1080/09603409.2023.2205760
El Samad, T. ORCID: 0000-0003-1590-9885, Adeyemi, I., Ghenai, C. & Janajreh, I. (2023). Assessment of glycerol gasification: devolatilization kinetics and parametric analysis. Chemical Papers, 77(6), pp. 3277-3291. doi: 10.1007/s11696-023-02703-9
Elgendi, M., Fletcher, R. R., Abbott, D. , Zheng, D., Kyriacou, P. A. ORCID: 0000-0002-2868-485X & Menon, C. (2023). Editorial: Mobile and wearable systems for health monitoring. Frontiers in Digital Health, 5, pp. 1-3. doi: 10.3389/fdgth.2023.1196103
Eltaş, S., Güler, M. A., Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 , Sofias, C. E. & Yıldırım, B. (2023). On the Beam-to-Beam Eccentric End Plate Connections: a Numerical Study. Thin Walled Structures, 188, article number 110787. doi: 10.1016/j.tws.2023.110787
Emamikoupaei, A., Bigdeli, A. Z. & Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 (2023). Nonlinear seismic response of mid-rise Modular Buildings subjected to near-field ground motions. Journal of Constructional Steel Research, 201, article number 107696. doi: 10.1016/j.jcsr.2022.107696
Ferizoli, R., Karimpour, P., May, J. M. ORCID: 0000-0002-8659-756X & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2023). A Bilateral In Vitro Model for Cardiovascular Disease Investigations Using Photoplethysmography Sensors. In: 2023 IEEE BioSensors Conference (BioSensors). 2023 IEEE BioSensors Conference (BioSensors), 30 Jul - 1 Aug 2023, London, United Kingdom. doi: 10.1109/biosensors58001.2023.10281067
Ferreira, F. P. V., Shamass, R., Santos, L. F. P. , Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 & Limbachiya, V. (2023). Web-Post Buckling Prediction Resistance for Perforated High-Strength Steel Beams with Elliptically-Based Web Openings. Structures, 55, pp. 245-262. doi: 10.1016/j.istruc.2023.05.139
Fu, F. ORCID: 0000-0002-9176-8159 (2023). Detection of Sleeve Grouting Compactness Based on Acoustic Emission Technology. Materials, 16(4), article number 1455. doi: 10.3390/ma16041455
Gattoni, C. ORCID: 0000-0002-7372-7484, Martinez-Gonzalez, B. ORCID: 0000-0002-2015-8783, Li, L. ORCID: 0000-0002-4026-0216 & Marcora, S. M. ORCID: 0000-0002-1570-7936 (2023). Assessing Cognitive-Motor Interference in Military Contexts: Validity and Reliability of Two Dual-tasking Tests. Military Medicine, 188(9-10), e2900-e2908. doi: 10.1093/milmed/usad048
Geber, E., Rodriguez, C., Karathanassis, I. K. ORCID: 0000-0001-9025-2866 , Lopez-Pintor, D., Manin, J., Pickett, L. & Gavaises, M. ORCID: 0000-0003-0874-8534 (2023). A general predictive methodology for fuel-mixture properties up to supercritical conditions. Fluid Phase Equilibria, 574, article number 113888. doi: 10.1016/j.fluid.2023.113888
Gholizadeh, N. & Fu, F. ORCID: 0000-0002-9176-8159 (2023). Seismic Behaviour of Multistorey Steel Framed Tall Buildings Using Intentionally Eccentric Braces. Shock and Vibration, 2023, pp. 1-20. doi: 10.1155/2023/7288450
Giaralis, A. ORCID: 0000-0002-2952-1171 & Taflanidis, A. (2023). Preface for the special issue on Advances on Inerter-based Seismic Protection of Structures. Bulletin of Earthquake Engineering, 21(3), pp. 1355-1359. doi: 10.1007/s10518-023-01626-w
González, T. (2023). Metal coating and embedding fibre optical sensors for industrial applications. (Unpublished Doctoral thesis, City, University of London)
Guan, Y., Zhang, T., Dong, X. , Sun, T. ORCID: 0000-0003-3861-8933 & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2023). Sensor for simultaneous measurement of temperature and humidity based on a chirped fiber Bragg grating partially bonded with thick polyimide film. IEEE Sensors Journal, 23(20), pp. 24583-24590. doi: 10.1109/jsen.2023.3312067
Hao, H., Liao, K., Ma, Q. ORCID: 0000-0001-5579-6454 , Zheng, X., Sun, H. & Khayyer, A. (2023). Wind turbine model-test method for achieving similarity of both model- and full-scale thrusts and torques. Applied Ocean Research, 130, article number 103444. doi: 10.1016/j.apor.2022.103444
Haque, S., El-Moussa, F., Komninos, N. ORCID: 0000-0003-2776-1283 & Rajarajan, M. ORCID: 0000-0001-5814-9922 (2023). A Systematic Review of Data-Driven Attack Detection Trends in IoT. Sensors, 23(16), article number 7191. doi: 10.3390/s23167191
Hashemi, S. M. (2023). Improved Interface Bond Relationships of FRP-Strengthened Masonry Structures through Experimental and Numerical Simulations. (Unpublished Doctoral thesis, City, University of London)
Hassani, V. ORCID: 0000-0001-6724-2520, Emami, M., Tjahjowidodo, T. , Sharma, A. & Roberts, C. (2023). A Survey on Process Modelling, Innovation, Design, and Material Characterisation in Additive Manufacturing. Digital Manufacturing Technology, 3(1), pp. 46-75. doi: 10.37256/dmt.3120232181
Hwidi, J. (2023). Wearable In-ear Electroencephalography Based System for Biometric Authentication. (Unpublished Doctoral thesis, City, University of London)
Jebelli, M., Shariloo, K. & Masdari, M. ORCID: 0000-0002-1159-2406 (2023). Flow-induced vibration of an elliptical cylinder and a wake-mounted flat plate. Ocean Engineering, 279, article number 114560. doi: 10.1016/j.oceaneng.2023.114560
Jeyaseelan, T., El Samad, T. ORCID: 0000-0003-1590-9885, Rajkumar, S. , Chatterjee, A. & Al-Zaili, J. ORCID: 0000-0003-4072-2107 (2023). A techno-economic assessment of waste oil biodiesel blends for automotive applications in urban areas: Case of India. Energy, 271, article number 127021. doi: 10.1016/j.energy.2023.127021
Kanthasamy, E., Thirunavukkarasu, K., Poologanathan, K. , Gunalan, S., Gatheeshgar, P., Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 & Corradi, M. (2023). Flexural Behaviour and Design Rules for SupaCee Sections with Web Openings. Journal of Building Engineering, 63(Part A), article number 105539. doi: 10.1016/j.jobe.2022.105539
Karimpour, P., May, J.M. ORCID: 0000-0002-8659-756X & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2023). Photoplethysmography for the Assessment of Arterial Stiffness. Sensors, 23(24), article number 9882. doi: 10.3390/s23249882
Khan, K, Chen, Z, Liu, J , Javed, K, Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 & Poologanathan, K (2023). Compressive Behaviors of Modular Steel Shear-Keyed Grouped Tubular Columns. Journal of Building Engineering, 66, article number 105861. doi: 10.1016/j.jobe.2023.105861
Khan, K., Chen, Z., Liu, J. & Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 (2023). Compressive behaviors of corner-supported modular steel sway frames with rotary inter-modular connections. Thin-Walled Structures, 193, article number 111245. doi: 10.1016/j.tws.2023.111245
Khan, K., Chen, Z., Liu, J. & Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 (2023). Experimental and analytical investigations on compression behaviors of rotary-connected sway column-supported steel modular interior frames. Journal of Building Engineering, 78, article number 107692. doi: 10.1016/j.jobe.2023.107692
Khan, K., Chen, Z., Liu, J. , Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 & Poologanathan, K. (2023). Axial compression behaviors of steel shear-keyed tubular columns: Numerical and analytical studies. Journal of Constructional Steel Research, 205, article number 107894. doi: 10.1016/j.jcsr.2023.107894
Kolakkattil, R., Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 & Sanjeev, A. J. (2023). A state-of-the-art review of progressive collapse research and guidelines for single-layer lattice shell structures. Structures, 56, article number 104945. doi: 10.1016/j.istruc.2023.104945
Kolakkattil, R., Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 & Sanjeevi, A. J. (2023). The Impact of Valency and the Orientation of the Members on the Global Stability of Lattice Steel Dome. In: Proceedings of the Annual Stability Conference Structural Stability Research Council. Annual Stability Conference, Structural Stability Research Council, 11-14 Apr 2023, Charlotte, USA.
Koukas, E., Papoutsakis, A. & Gavaises, M. ORCID: 0000-0003-0874-8534 (2023). Numerical investigation of shock-induced bubble collapse dynamics and fluid-solid interactions during shock-wave lithotripsy. Ultrasonics Sonochemistry, 95, article number 106393. doi: 10.1016/j.ultsonch.2023.106393
Kralj-Hans, I., Li, K., Wesek, A. , Lamorgese, A., Omar, F., Ranasinghe, K., McGee, M., Brack, K., Li, S., Aggarwal, R., Bulle, A., Kodre, A., Sharma, S., Fluck, D., John, I., Sharma, P., Belsey, J. D., Li, L. ORCID: 0000-0002-4026-0216, Seshasai, S. R. K., Li, H. L., Marczin, N. & Chen, Z. (2023). Leflunomide treatment for patients hospitalised with COVID-19: DEFEAT-COVID randomised controlled trial. BMJ Open, 13(4), article number e068179. doi: 10.1136/bmjopen-2022-068179
Kumar Mishra, R. K., Li, D., Chianella, I. , Goel, S., Lotfian, S. & Yazdani Nezhad, H. ORCID: 0000-0003-0832-3579 (2023). Low Electric Field Induction in BaTiO3-epoxy nanocomposites. Functional Composite Materials, 4(1), article number 6. doi: 10.1186/s42252-023-00043-1
Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2023). Optical crosstalk and other forms of light interference in pulse oximeter comparison studies.. Journal of Clinical Monitoring and Computing, 37(6), pp. 1481-1488. doi: 10.1007/s10877-023-01060-y
Lalegani Dezaki, M., Sales, R., Zolfagharian, A. , Yazdani Nezhad, H. ORCID: 0000-0003-0832-3579 & Bodaghi, M. (2023). Soft pneumatic actuators with integrated resistive sensors enabled by multi-material 3D printing. The International Journal of Advanced Manufacturing Technology, 128(9-10), pp. 4207-4221. doi: 10.1007/s00170-023-12181-8
Lalicata, L. M., Ritchie, E., Stallebrass, S. E. ORCID: 0000-0002-3747-9524 & McNamara, A. ORCID: 0000-0002-3452-0800 (2023). Novel experimental technique to model impression piles in centrifuge testing. International Journal of Physical Modelling in Geotechnics, 24(2), pp. 78-91. doi: 10.1680/jphmg.22.00065
Lan, X., Li, Z., Fu, F. ORCID: 0000-0002-9176-8159 & Qian, K. (2023). Robustness of Steel Braced Frame to Resist Disproportionate Collapse Caused by Corner Column Removal. Journal of Building Engineering, 69, article number 106226. doi: 10.1016/j.jobe.2023.106226
Le, B. T., Nguyen, T. T. T., Divall, S. ORCID: 0000-0001-9212-5115 & Davies, M. C. R. (2023). A study on large volume losses induced by EBPM tunnelling in sandy soils. Tunnelling and Underground Space Technology, 132, article number 104847. doi: 10.1016/j.tust.2022.104847
Leventides, J., Poulios, C., Livada, M. ORCID: 0000-0002-0432-872X & Giannikos, I. (2023). Reengineering of interbank networks. Network Science, 12(1), pp. 41-64. doi: 10.1017/nws.2023.21
Li, Q., Yan, S. ORCID: 0000-0001-8968-6616, Zhang, Y. ORCID: 0000-0002-4141-909X , Zhang, N., Ma, Q. ORCID: 0000-0001-5579-6454 & Xie, Z. (2023). Numerical Modelling of Breaking Wave Impacts on Seawalls with Recurved Parapets Using qaleFOAM. International Society of Offshore and Polar Engineers, 33(2), pp. 157-163. doi: 10.17736/ijope.2023.sv05
Li, Y., Yan, S. ORCID: 0000-0001-8968-6616, Shi, H. , Ma, Q. ORCID: 0000-0001-5579-6454, Li, D. & Cao, F. (2023). Hydrodynamic analysis of a novel multi-buoy wind-wave energy system. Renewable Energy, 219(1), article number 119477. doi: 10.1016/j.renene.2023.119477
Li, Z., Dong, T-F., Fu, F. ORCID: 0000-0002-9176-8159 & Qian, K. (2023). Dynamic response of cross steel reinforced concrete filled steel tubular columns under impact under fire. Journal of Constructional Steel Research, 200, article number 107643. doi: 10.1016/j.jcsr.2022.107643
Li, Z. & Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 (2023). Design for Seismic Resilient Cross Laminated Timber (CLT) Structures: A Review of Research, Novel Connections, Challenges and Opportunities. Buildings, 13(2), article number 505. doi: 10.3390/buildings13020505
Li, Z. & Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 (2023). A Novel Limited-Damage 3D-Printed Inter-Module Connection System for Cross Laminated Timber (CLT) Volumetric Structures. Paper presented at the World Conference on Timber Engineering (WCTE 2023), 19-22 Jun 2023, Oslo, Norway. doi: 10.52202/069179-0163
Li, T., Yu, S., Sun, B. , Li, Y., Wang, X., Pan, Y., Song, C., Ren, Y., Zhang, Z., Grattan, K. T. V. ORCID: 0000-0003-2250-3832, Wu, Z. & Zhao, J. (2023). Bioinspired claw-engaged and biolubricated swimming microrobots creating active retention in blood vessels. Science Advances, 9(18), article number eadg4501. doi: 10.1126/sciadv.adg4501
Liang, S-L., Fu, F. ORCID: 0000-0002-9176-8159, Huang, Z-Q. & Qian, K. (2023). Enhancement of collapse-resistant capacity of non-seismically designed RC frames using various CFRP strengthening schemes. Engineering Structures, 291, article number 116450. doi: 10.1016/j.engstruct.2023.116450
Lin, Y., Palaniappan, R., De Wilde, P. & Li, L. ORCID: 0000-0002-4026-0216 (2023). Robust Long-Term Hand Grasp Recognition With Raw Electromyographic Signals Using Multidimensional Uncertainty-Aware Models. IEEE Transactions on Neural Systems and Rehabilitation Engineering, 31, pp. 962-971. doi: 10.1109/tnsre.2023.3236982
Liu, Y., Yang, J., Xue, Y. , Gao, S., Tian, P., Ye, P., Duan, Z., Shi, J., Yang, J., Yuan, L., Grattan, K. T. V. ORCID: 0000-0003-2250-3832 & Guan, C. (2023). Simultaneous measurement of temperature and salinity based on a hole-assisted dual-core fiber. Optics Express, 31(20), pp. 32543-32553. doi: 10.1364/oe.500576
Mahesh, V. ORCID: 0000-0001-8394-1321, George, J. P., Mahesh, V. , Chakraborthy, H., Mukunda, S. & Ponnusami, S. A. ORCID: 0000-0002-2143-8971 (2023). Dry-sliding wear properties of 3D printed PETG/SCF/OMMT nanocomposites: Experimentation and model predictions using artificial neural network. Journal of Reinforced Plastics and Composites, 43(11-12), pp. 682-693. doi: 10.1177/07316844231188853
Mahesh, V. ORCID: 0000-0001-8394-1321, Mahesh, V. & Ponnusami, S. A. ORCID: 0000-0002-2143-8971 (2023). Nonlinear active control of thermally induced pyro-coupled vibrations in porous-agglomerated CNT core sandwich plate with magneto-piezo-elastic facings. Acta Mechanica, 234(10), pp. 5071-5099. doi: 10.1007/s00707-023-03641-z
Mahesh, V., Mahesh, V., Ponnusami, S. A. ORCID: 0000-0002-2143-8971 & Harursampath, D. (2023). Machine learning assisted coupled frequency analysis of skewed multi-phase magnetoelectric composite plates with temperature and moisture dependent properties. Mechanics of Advanced Materials and Structures, 31(25), pp. 7111-7126. doi: 10.1080/15376494.2023.2242858
Mahesh, V. (2023). Integrated effects of auxeticity and pyro-coupling on the nonlinear static behaviour of magneto-electro-elastic sandwich plates subjected to multi-field interactive loads. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 237(17), pp. 3945-3967. doi: 10.1177/09544062221149300
Mahesh, V., Mahesh, V. & Ponnusami, S. A. ORCID: 0000-0002-2143-8971 (2023). FEM-ANN approach to predict nonlinear pyro-coupled deflection of sandwich plates with agglomerated porous nanocomposite core and piezo-magneto-elastic facings in thermal environment. Mechanics of Advanced Materials and Structures, 31(19), pp. 4551-4574. doi: 10.1080/15376494.2023.2201927
Mahmoud, M., Naher, S. ORCID: 0000-0003-2047-5807, Ramadan, M. , Abdelkareem, M. A., Jaber, H. & Olabi, A-G. (2023). Investigation of a ground-cooled organic Rankine cycle for waste heat recovery. International Journal of Thermofluids, 18, article number 100348. doi: 10.1016/j.ijft.2023.100348
Maleki, B., del Mar Casanovas-Rubio, M., de la Fuente Antequera, A. & Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 (2023). An Assessment of Sustainability for Residential Skyscrapers in Accordance with a Multicriteria Decision-Making Method: Nine Dubai Case Studies. Journal of Architectural Engineering, 29(4), article number 04023038. doi: 10.1061/jaeied.aeeng-1559
Manolesos, M. ORCID: 0000-0002-5506-6061, Chng, L., Kaufmann, N. , Ouro, P., Ntouras, D. & Papadakis, G. (2023). Using vortex generators for flow separation control on tidal turbine profiles and blades. Renewable Energy, 205, pp. 1025-1039. doi: 10.1016/j.renene.2023.02.009
Mejía-Mejía, E. ORCID: 0000-0002-5357-4329 & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2023). Effects of noise and filtering strategies on the extraction of pulse rate variability from photoplethysmograms. Biomedical Signal Processing and Control, 80(1), article number 104291. doi: 10.1016/j.bspc.2022.104291
Mergos, P.E. ORCID: 0000-0003-3817-9520 (2023). Sustainable and resilient seismic design of reinforced concrete frames with rocking isolation on spread footings. Engineering Structures, 292, article number 116605. doi: 10.1016/j.engstruct.2023.116605
Mikes, I. G. & Kappos, A. J. ORCID: 0000-0002-5566-5021 (2023). Modelling of the full-range response of abutment-backfill systems. In: COMPDYN Proceedings. 9th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, 12-14 Jun 2023, Athens, Greece.
Mintz, B., Qaban, A. ORCID: 0000-0003-2982-8429 & Kang, S. E. (2023). The Influence of Small Additions of Alloying Elements on the Hot Ductility of AHSS Steels: A Critical Review Part 2. Metals, 13(2), article number 406. doi: 10.3390/met13020406
Mishra, R., Goel, S., Chianella, I. & Yazdani Nezhad, H. ORCID: 0000-0003-0832-3579 (2023). Graphene nanoplatelets/Barium titanate Polymer Nanocomposite Fibril: A Remanufactured Multifunctional Material with Unprecedented Electrical, Thermomechanical and Electromagnetic Properties. Advanced Sustainable Systems, 7(11), doi: 10.1002/adsu.202300177
Moise, P., Zauner, M., Sandham, N. D. , Timme, S. & He, W. (2023). Transonic Buffet Characteristics Under Conditions of Free and Forced Transition. AIAA Journal, 61(3), pp. 1061-1076. doi: 10.2514/1.j062362
Morar, N. ORCID: 0000-0001-9109-8864, Holtham, N., Hackel, L. , Davami, K., Sharma, M., DeWald, A. & Roy, R. (2023). Effects of high-energy laser peening followed by pre-hot corrosion on stress relaxation, microhardness, and fatigue life and strength of single-crystal nickel CMSX-4® superalloy. The International Journal of Advanced Manufacturing Technology, 126(11-12), pp. 4893-4912. doi: 10.1007/s00170-023-11358-5
Moslem, F., Babaie, Z., Masdari, M. ORCID: 0000-0002-1159-2406 & Fedir, K. (2023). A review on insects flight aerodynamics, noise sources, and flow control mechanisms. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 237(13), pp. 2907-2917. doi: 10.1177/09544100231169345
Mu, G., Dong, H., Sun, T. ORCID: 0000-0003-3861-8933 , Grattan, K. T. V. ORCID: 0000-0003-2250-3832, Wu, Z. & Zhao, J. (2023). A switching method for traveling/standing wave transportation modes in two-dimensional acoustic fields using a dual-transducer support structure. Ultrasonics Sonochemistry, 101, article number 106724. doi: 10.1016/j.ultsonch.2023.106724
Mu, G., Qiao, Y., Sui, M. , Grattan, K. T. V. ORCID: 0000-0003-2250-3832, Dong, H. & Zhao, J. (2023). Acoustic-propelled micro/nanomotors and nanoparticles for biomedical research, diagnosis, and therapeutic applications. Frontiers in Bioengineering and Biotechnology, 11, article number 1276485. doi: 10.3389/fbioe.2023.1276485
Naderi Kalali, E., Lotfian, S., Entezar Shabestari, M. , Khayatzadeh, S., Zhao, C. & Yazdani Nezhad, H. ORCID: 0000-0003-0832-3579 (2023). A critical review of the current progress of plastic waste recycling technology in structural materials. Current Opinion in Green and Sustainable Chemistry, 40, article number 100763. doi: 10.1016/j.cogsc.2023.100763
Nakka, R., Harursampath, D. & Ponnusami, S. A. ORCID: 0000-0002-2143-8971 (2023). A generalised deep learning-based surrogate model for homogenisation utilising material property encoding and physics-based bounds. Scientific Reports, 13(1), article number 9079. doi: 10.1038/s41598-023-34823-3
Nakka, R., Phanendra Kumar, A., Harursampath, D. & Ponnusami, S. A. ORCID: 0000-0002-2143-8971 (2023). Influence of fibre cross-section profile on the multi-physical properties of uni-directional composites. Composite Structures, 321, article number 117321. doi: 10.1016/j.compstruct.2023.117321
Nicholas, S., Monti, A., Omidyeganeh, M. ORCID: 0000-0002-4140-2810 & Pinelli, A. ORCID: 0000-0001-5564-9032 (2023). The role of the in-plane solidity on canopy flows. Journal of Fluid Mechanics, 975, article number A37. doi: 10.1017/jfm.2023.848
Nikolic, B. (2023). Mathematical Modelling and Design of Current Sensors in Non-Conventional Instrument Transformers. (Unpublished Doctoral thesis, City, University of London)
Nouri, J. M. ORCID: 0000-0001-8610-3737, Guerrato, D., Stosic, N. & Yan, Y. (2023). Turbulent flow development within the discharge cavity of a screw compressor. International Journal of Engine Research, 24(8), pp. 3642-3654. doi: 10.1177/14680874231163640
Ogrodniczak, P. & White, M. ORCID: 0000-0002-7744-1993 (2023). Non-equilibrium CFD simulation of the wet-to-dry expansion of the siloxane MM in a converging–diverging nozzle. Applied Thermal Engineering, 234, article number 121158. doi: 10.1016/j.applthermaleng.2023.121158
Papkov, S. O. & Banerjee, J. R. (2023). A New Method for Free Vibration Analysis of Triangular Isotropic and Orthotropic Plates of Isosceles Type Using an Accurate Series Solution. Mathematics, 11(3), article number 649. doi: 10.3390/math11030649
Paprocki, S., Qassem, M. ORCID: 0000-0003-0730-3189 & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2023). The Impact of Acetic Acid on Measuring Ethanol Concentrations in Water and Human Serum Using Short-Wave Infrared Spectroscopy. International Journal of Molecular Sciences, 24(3), article number 2980. doi: 10.3390/ijms24032980
Patel, B. (2023). Leakage flows and Conjugate Heat Transfer in Rotary Positive Displacement Machines. (Unpublished Doctoral thesis, City, University of London)
Patel, B., Kovacevic, A., Plantegenet, T. ORCID: 0000-0003-0585-3726 & Tam, T. (2023). Study of leakage flow in oil-free positive displacement rotary machines using particle image velocimetry. Experimental Thermal and Fluid Science, 145, article number 110886. doi: 10.1016/j.expthermflusci.2023.110886
Patel, H. H., Lakhera, V. J. & Kovacevic, A. ORCID: 0000-0002-8732-2242 (2023). Validation of Leakage Model for an Oil-free Twin-Screw Compressor. In: Bhattacharyya, S. & Benim, A. C. (Eds.), Lecture Notes in Mechanical Engineering. 48th National Conference on Fluid Mechanics and Fluid Power (FMFP), 27-29 Dec 2021, Pilani, India. doi: 10.1007/978-981-19-6970-6_49
Pathak, A. K., Verma, S., Sakda, N. , Viphavakit, C., Chitaree, R. & Rahman, B. M. A. ORCID: 0000-0001-6384-0961 (2023). Recent Advances in Optical Hydrogen Sensor including Use of Metal and Metal Alloys: A Review. Photonics, 10(2), article number 122. doi: 10.3390/photonics10020122
Patil, S. (2023). Research in Profiling and Development of a New Screw Rotor Profile. (Unpublished Doctoral thesis, City, University of London)
Patil, S., Abdan, S., Asati, N. , Stosic, N. ORCID: 0000-0001-8034-4046 & Kovacevic, A. ORCID: 0000-0002-8732-2242 (2023). Improvement of Screw Compressor Performance by Rotor Profile Modification to Reduce Mechanical Losses. In: Energy. ASME 2023 International Mechanical Engineering Congress and Exposition, 29 Oct - 2 Nov 2023, New Orleans, USA. doi: 10.1115/imece2023-112721
Patsialis, D., Taflanidis, A. & Giaralis, A. ORCID: 0000-0002-2952-1171 (2023). Exploring the impact of excitation and structural response/performance modeling fidelity in the design of seismic protective devices. Engineering Structures, 291, article number 115811. doi: 10.1016/j.engstruct.2023.115811
Paul, D., De, S., Grattan, K. T. V. ORCID: 0000-0003-2250-3832 & Chakraborty, A. L. (2023). Fully automated, real-time monitoring of ambient water vapour using a compact 1392 nm tunable diode laser-based system. Paper presented at the IEEE Applied Sensing Conference 2023, 23-25 Jan 2023, Bengaluru, India.
Pereira Júnior, S. E., Ferreira, F. P. V., Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 & De Nardin, S. (2023). Flexural behavior of steel-concrete ultra-shallow floor beams (USFBs) with precast hollow-core slab. Engineering Structures, 278, article number 115524. doi: 10.1016/j.engstruct.2022.115524
Piernikowska, S. & Tomas-Rodriguez, M. ORCID: 0000-0001-9630-9579 (2023). Passive Inerter-Based Network Self-Induced Oscillations Damping for Spar-Buoy Floating Offshore Wind Turbines. Paper presented at the 5th International Workshop on Wind (and) Water Energy, WWWE 2023, 14 Dec 2023, Tasmania, Australia.
Pujari, C., Muniyal, B., B, C. C. , Rao, A., Sadiname, V. & Rajarajan, M. ORCID: 0000-0001-5814-9922 (2023). Identity resilience in the digital health ecosystem: A key recovery-enabled framework. Computers in Biology and Medicine, 167, article number 107702. doi: 10.1016/j.compbiomed.2023.107702
Qin, H., Li, C., Zhu, J. , Luo, B. & Fu, F. ORCID: 0000-0002-9176-8159 (2023). Development of a high-sensitivity and adjustable FBG strain sensor for structural monitoring. Structural Control and Health Monitoring, 2023, article number 6665803. doi: 10.1155/2023/6665803
Qin, C., Wang, Y., Liu, Z. , Liu, W., Li, Y., Li, P., Zhu, Z., Guan, C., Shi, J. & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2023). Broadband polarizer using single-layer grating with ultra-high extinction ratio. AIP Advances, 13(5), article number 055003. doi: 10.1063/5.0135669
Rabbani, M., Rahman, E., Powner, M. B. ORCID: 0000-0003-4913-1004 & Triantis, I. F. ORCID: 0000-0002-8900-781X (2023). Making Sense of Electrical Stimulation: A Meta-analysis for Wound Healing. Annals of Biomedical Engineering, 52(2), pp. 153-177. doi: 10.1007/s10439-023-03371-2
Raffaele, B., Rodriguez Fernandez, C., Karathanassis, I. K. ORCID: 0000-0001-9025-2866 & Gavaises, M. ORCID: 0000-0003-0874-8534 (2023). Collapse of Cavitation Bubble Clusters of Fuels Utilised with Modern Combustion Systems. In: Ragucci, R., Marengo, M. & Sorrentino, G. (Eds.), ILASS Europe 2023 Meeting European Meeting on Liquid Atomization and Spray Systems. ILASS Europe 2023, 31st European Conference on Liquid Atomization & Spray Systems, 4-7 Sep 2023, Napoli, Italy.
Rajana, K. & Giaralis, A. ORCID: 0000-0002-2952-1171 (2023). A novel nonlinear isolated rooftop tuned mass damper-inerter (IR-TMDI) system for seismic response mitigation of buildings. Acta Mechanica, 234(9), pp. 3751-3777. doi: 10.1007/s00707-023-03556-9
Rajana, K., Wang, Z. & Giaralis, A. ORCID: 0000-0002-2952-1171 (2023). Optimal design and assessment of tuned mass damper inerter with nonlinear viscous damper in seismically excited multi-storey buildings. Bulletin of Earthquake Engineering, 21(3), pp. 1509-1539. doi: 10.1007/s10518-022-01609-3
Rattia, V., Divall, S. ORCID: 0000-0001-9212-5115, Gitirana Jr., G. & Assis, A. (2023). Estimating settlements due to TBM tunnelling. Proceedings of the Institution of Civil Engineers: Geotechnical Engineering, 176(6), pp. 675-686. doi: 10.1680/jgeen.21.00103
Ravikumar, B. ORCID: 0000-0001-7095-2195, Karathanassis, I. K. ORCID: 0000-0001-9025-2866, Smith, T. & Gavaises, M. ORCID: 0000-0003-0874-8534 (2023). Multi-scale modelling of dilute viscoelastic liquids: Atomistic to mesoscale mapping of polymer solutions. Polymer, 285, article number 126360. doi: 10.1016/j.polymer.2023.126360
Ravikumar, B. ORCID: 0000-0001-7095-2195, Karathanassis, I. K. ORCID: 0000-0001-9025-2866, Smith, T. & Gavaises, M. (2023). Dilute viscoelastic polymer solutions for dielectric heat transfer applications: A molecular dynamics study. International Journal of Thermofluids, 18, article number 100333. doi: 10.1016/j.ijft.2023.100333
Reena, C. G., Gurupatham, B. G. A. & Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 (2023). Column Link Behavior in Eccentrically Braced Composite 3-Dimensional Frames. Buildings, 13(12), article number 2970. doi: 10.3390/buildings13122970
Riley, P. H. ORCID: 0000-0002-1580-7689, Degano, M. & Gerada, C. (2023). Radical technology innovations for high-speed transport; ePlanes to replace rail?. IET Electrical Systems in Transportation, 13(1), article number e12061. doi: 10.1049/els2.12061
Ritchie, E. P. (2023). Development of anisotropic clay soil beds for geotechnical centrifuge testing. (Unpublished Doctoral thesis, City, University of London)
Ritchie, E. P., Divall, S. ORCID: 0000-0001-9212-5115 & Goodey, R.J. (2023). A method for creating larger clay samples with permeability anisotropy for geotechnical centrifuge modelling. In: Rahman, M. & Jaksa, M. (Eds.), Proceedings of the 20th International Conference on Soil Mechanics and Geotechnical Engineering. Proceedings of the 20th International Conference on Soil Mechanics and Geotechnical Engineering, 01- 05 May 2022, Sydney, Australia.
Roldan, M. & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2023). Head Phantom for the Acquisition of Pulsatile Optical Signals for Traumatic Brain Injury Monitoring. Photonics, 10(5), article number 504. doi: 10.3390/photonics10050504
Roldan, M. & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2023). A Non-Invasive Optical Multimodal Photoplethysmography-Near Infrared Spectroscopy Sensor for Measuring Intracranial Pressure and Cerebral Oxygenation in Traumatic Brain Injury. Applied Sciences, 13(8), article number 5211. doi: 10.3390/app13085211
Roldán, M., Bradley, G. R. E., Mejía-Mejía, E. , Abay, T. Y. & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2023). Non-invasive monitoring of intracranial pressure changes: healthy volunteers study. Frontiers in Physiology, 14, article number 1208010. doi: 10.3389/fphys.2023.1208010
Rondao, D. ORCID: 0000-0001-9438-0267, Aouf, N. ORCID: 0000-0001-9291-4077 & Richardson, M. A. (2023). ChiNet: Deep Recurrent Convolutional Learning for Multimodal Spacecraft Pose Estimation. IEEE Transactions on Aerospace and Electronic Systems, 59(2), pp. 937-949. doi: 10.1109/taes.2022.3193085
Sa'ad, M. S. M., Ahmad, H., Alias, M. A. , Zaini, M. K. A., Lim, K. S., Harun, S. W., Grattan, K. T. V. ORCID: 0000-0003-2250-3832, Rahman, B. M. ORCID: 0000-0001-6384-0961, Brambilla, G., Reduan, S. A., Bayang, L. & Ismail, M. F. (2023). Surface-Mounted Tilt Sensor Using Fiber Bragg Grating Technology for Engineered Slope Monitoring With Temperature Compensation. IEEE Sensors Journal, 23(12), pp. 12828-12837. doi: 10.1109/jsen.2023.3268649
Sa'ad, M. S. M., Ahmad, H., Alias, M. A. , Zaini, M. K. A., Samion, M. Z., Grattan, K. T. V. ORCID: 0000-0003-2250-3832, Rahman, B. M. ORCID: 0000-0001-6384-0961, Brambilla, G., Sing, L. K., Harun, S. W., Bayang, L., Reduan, S. A., Thambiratnam, K., Zulkifli, M. Z. & Ismail, M. F. (2023). Optical fiber Bragg grating-based pressure sensor for soil monitoring applications. Optical Engineering, 62(8), article number 086101. doi: 10.1117/1.OE.62.8.086101
Sahu, R., Harursampath, D. & Ponnusami, S. A. ORCID: 0000-0002-2143-8971 (2023). Continuum modeling of nonlinear buckling behavior of CNT using variational asymptotic method and nonlinear FEA. Mechanics of Advanced Materials and Structures, 31(21), pp. 5107-5124. doi: 10.1080/15376494.2023.2211971
Sahu, R., Ponnusami, S. A. ORCID: 0000-0002-2143-8971, Weimer, C. & Harursampath, D. (2023). Interface engineering of carbon fiber composites using CNT: A review. Polymer Composites, 45(1), pp. 9-42. doi: 10.1002/pc.27772
Saincher, S., Sriram, V., Ravindar, R. , Yan, S. ORCID: 0000-0001-8968-6616, Stagonas, D., Schimmels, S., Xie, Z., Benoit, M., Benguigui, W., Teles, M., Robaux, F., Peyrard, C., Asiikkis, A., Frantzis, C., Vakis, A., Grigoriadis, D., Li, Q., Ma, Q. ORCID: 0000-0001-5579-6454, Zhang, N., Zheng, K., Zhao, X., Hu, X., Chen, S., Chen, S., Meng, Q., Zhao, W. & Wan, D. (2023). Comparative Study on Breaking Waves Interaction with Vertical Wall Retrofitted with Recurved Parapet in Small and Large Scale. International Journal of Offshore and Polar Engineering, 33(2), pp. 113-122. doi: 10.17736/ijope.2023.jc890
Salah, S. (2023). Design and analysis of supercritical carbon-dixoide axial turbines. (Unpublished Doctoral thesis, City, University of London)
Salah, S., Crespi, F., White, M. ORCID: 0000-0002-7744-1993 , Munoz, A., Paggini, A., Ruggiero, M., Sanchez, D. & Sayma, A. I. ORCID: 0000-0003-2315-0004 (2023). Axial turbine flow path design for concentrated solar power plants operating with CO2 blends. Applied Thermal Engineering, 230(Part A), article number 120612. doi: 10.1016/j.applthermaleng.2023.120612
Sa’ad, M. S. M., Ahmad, H., Samion, M. Z. , Alias, M. A., Zaini, M. K. A., Sing, L. K., Grattan, K. T. V. ORCID: 0000-0003-2250-3832, Rahman, B. M. ORCID: 0000-0001-6384-0961, Brambilla, G., Harun, S. W. & Ismail, M. F. (2023). A fiber Bragg grating-based inclinometer probe with enhanced sensitivity for a higher slope profiling resolution. Sensors and Actuators A: Physical, 364, article number 114804. doi: 10.1016/j.sna.2023.114804
Selim, O. & Brücker, C. ORCID: 0000-0001-5834-3020 (2023). Aerofoil Flow Sensing Using On-Board Optical Tracking of Flexible Pillar Sensors. Fluids, 8(5), article number 146. doi: 10.3390/fluids8050146
Serrano-Antoñanazas, M., Sierra-Garcia, J-E., Santos, M. & Tomas-Rodriguez, M. ORCID: 0000-0001-9630-9579 (2023). Identification of Vibration Modes in Floating Offshore Wind Turbines. Journal of Marine Science and Engineering, 11(10), article number 1893. doi: 10.3390/jmse11101893
Shaheen, M., Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979, Ferreira, F. P. V. & Cunningham, L. S. (2023). Rotational capacity of exposed base plate connections with various configurations of anchor rod sleeves. Journal of Constructional Steel Research, 201, article number 107754. doi: 10.1016/j.jcsr.2022.107754
Shamekhi Amiri, S. (2023). Transient analysis and optimisation of solar-powered micro gas turbine operation during start-up. (Unpublished Doctoral thesis, City, University of London)
Shams, A. (2023). Bubbles and soft-materials: from computational modeling to applications.. (Unpublished Doctoral thesis, City, University of London)
Sharma, K., Al-Zaili, J. ORCID: 0000-0003-4072-2107 & Sayma, A. I. ORCID: 0000-0003-2315-0004 (2023). A System Dynamics Approach to Assess the Impact of Policy Interventions on the Market Penetration of Micro Gas Turbines. In: Proceedings of the ASME Turbo Expo. ASME Turbo Expo 2023 Turbomachinery Technical Conference and Exposition, 26-30 Jun 2023, Boston, USA. doi: 10.1115/GT2023-101952
Sheikh, M., Qassem, M. ORCID: 0000-0003-0730-3189 & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2023). A paper-based colorimetric method for monitoring of lithium therapeutic levels. Analytical Methods, 15(7), pp. 979-986. doi: 10.1039/d2ay01743a
Sheikh, M., Qassem, M. ORCID: 0000-0003-0730-3189 & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2023). Optical determination of lithium therapeutic levels in micro‐volumes of interstitial fluid. Bipolar Disorders, 25(2), pp. 136-147. doi: 10.1111/bdi.13291
Sivaselvan, N., Vivekananda Bhat, K., Rajarajan, M. ORCID: 0000-0001-5814-9922 & Das, A. K. (2023). A New Scalable and Secure Access Control Scheme using Blockchain Technology for IoT. IEEE Transactions on Network and Service Management, 20(3), pp. 2957-2974. doi: 10.1109/tnsm.2023.3246120
Smith, I. K. ORCID: 0000-0003-1524-9880 (2023). A Note on Power Plant Selection for Engineered Geothermal Systems. Proceedings of the Institution of Mechanical Engineers Part C: Journal of Mechanical Engineering Science, 237(22), pp. 5494-5499. doi: 10.1177/09544062231166804
Soleymani, T. ORCID: 0000-0003-1359-8892, Baras, J. S. ORCID: 0000-0002-4955-8561, Hirche, S. ORCID: 0000-0001-7819-5926 & Johansson, K. H. ORCID: 0000-0001-9940-5929 (2023). Value of Information in Feedback Control: Global Optimality. IEEE Transactions on Automatic Control, 68(6), pp. 3641-3647. doi: 10.1109/tac.2022.3194125
Srivastava, C., Bhola, L., Mahesh, V. ORCID: 0000-0001-8394-1321 , Guruprasad, P. J., Petrinic, N., Scarpa, F., Harursampath, D. & Ponnusami, S. A. ORCID: 0000-0002-2143-8971 (2023). Exploiting nonlinearities through geometric engineering to enhance the auxetic behaviour in re-entrant honeycomb metamaterials. Scientific Reports, 13(1), article number 20915. doi: 10.1038/s41598-023-47525-7
Verma, S., Chugh, S., Ghosh, S. & Rahman, B. M. ORCID: 0000-0001-6384-0961 (2023). A comprehensive deep learning method for empirical spectral prediction and its quantitative validation of nano-structured dimers. Scientific Reports, 13(1), article number 1129. doi: 10.1038/s41598-023-28076-3
Verma, S. & Rahman, B. M. ORCID: 0000-0001-6384-0961 (2023). Computational Investigation of Advanced Refractive Index Sensor Using 3-Dimensional Metamaterial Based Nanoantenna Array. Sensors, 23(3), article number 1290. doi: 10.3390/s23031290
Wang, J., Sun, G., Ning, Y. , Li, Z., Zhao, L., Wang, J., Liu, T., Zhang, W., Dong, G. & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2023). Innovative sensor for refractive index monitoring based on a plastic optical fiber side-polished in a 'V'-bent structure. Measurement Science and Technology, 34(5), article number 055114. doi: 10.1088/1361-6501/acbab5
Wang, L., Chen, J., Shen, N. & Fu, F. ORCID: 0000-0002-9176-8159 (2023). No AccessFibre Bragg grating sensor investigation on bond stress of steel-carbon fibre reinforced concrete. Proceedings of the Institution of Civil Engineers: Structures and Buildings, doi: 10.1680/jstbu.22.00090
Wang, Z. & Giaralis, A. ORCID: 0000-0002-2952-1171 (2023). A novel integrated optimization-driven design framework for minimum-weight lateral-load resisting systems in wind-sensitive buildings equipped with dynamic vibration absorbers. Structural Control and Health Monitoring, 2023, pp. 1-19. doi: 10.1155/2023/3754773
Wang, Z., Rajana, K., Corfar, D. ORCID: 0000-0002-9843-2973 & Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 (2023). Automated Minimum-Weight Sizing Design Routine for Tall Self-Standing Modular Buildings Subjected to Multiple Performance Constraints Under Static and Dynamic Wind Loads. Engineering Structures, 286, article number 116121. doi: 10.1016/j.engstruct.2023.116121
Weng, Y., Fu, F. ORCID: 0000-0002-9176-8159 & Qian, K. (2023). Punching Shear Resistance of Corroded Slab-Column Connections Subjected to Eccentric Load. Journal of Structural Engineering, 149(1), article number 04022219. doi: 10.1061/(asce)st.1943-541x.0003504
Yang, Y-F., Fu, F. ORCID: 0000-0002-9176-8159 & Zhang, Y-Q. (2023). Static performance of steel slag concrete filled steel square hollow section members. Journal of Constructional Steel Research, 205, article number 107896. doi: 10.1016/j.jcsr.2023.107896
Yu, A., Chen, Z., Zhang, L. , Li, X., Shi, J. & Fu, F. ORCID: 0000-0002-9176-8159 (2023). Study on AE characteristics of concrete with different w/c ratio under uniaxial compression. Structures, 58, article number 105443. doi: 10.1016/j.istruc.2023.105443
Yu, Z., Ma, Q. ORCID: 0000-0001-5579-6454, Zheng, X. , Liao, K., Sun, H. & Khayyer, A. (2023). A hybrid numerical model for simulating aero-elastic-hydro-mooring-wake dynamic responses of floating offshore wind turbine. Ocean Engineering, 268, article number 113050. doi: 10.1016/j.oceaneng.2022.113050
Yu, A., Liu, X., Fu, F. ORCID: 0000-0002-9176-8159 , Chen, X. & Zhang, Y. (2023). Acoustic Emission Signal Denoising of Bridge Structures using SOM Neural Network Machine Learning. Journal of Performance of Constructed Facilities, 37(1), article number 04022066. doi: 10.1061/(asce)cf.1943-5509.0001778
Yuan, Y., Ma, Q. ORCID: 0000-0001-5579-6454, Yan, S. , Zheng, X., Liao, K., Ma, G., Sun, H. & Khayyer, A. (2023). A hybrid method for modelling wake flow of a wind turbine. Ocean Engineering, 281, article number 114770. doi: 10.1016/j.oceaneng.2023.114770
Zhang, H., Wu, Q., Su, X. , Guo, J., Xiong, K., Sun, T. ORCID: 0000-0003-3861-8933 & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2023). Cantilevered microfiber Bragg Grating sensor with high ultrasonic sensitivity and designable resonant frequency. Journal of Lightwave Technology, 41(22), pp. 7029-7035. doi: 10.1109/jlt.2023.3296616
Zhang, L., Li, C., Dong, H. , Liu, X., Sun, T., Grattan, K. T. V. ORCID: 0000-0003-2250-3832 & Zhao, J. (2023). Fiber Bragg Grating-based sensor system for sensing the shape of flexible needles. Measurement, 206, article number 112251. doi: 10.1016/j.measurement.2022.112251
Zhang, N., Ma, Q. ORCID: 0000-0001-5579-6454, Zheng, X. & Yan, S. (2023). A two-way coupling method for simulating wave-induced breakup of ice floes based on SPH. Journal of Computational Physics, 488, article number 112185. doi: 10.1016/j.jcp.2023.112185
Zhang, N., Yan, S. ORCID: 0000-0001-8968-6616, Ma, Q. ORCID: 0000-0001-5579-6454 , Guo, X., Xie, Z. & Zheng, X. (2023). A CNN-supported Lagrangian ISPH model for free surface flow. Applied Ocean Research, 136, article number 103587. doi: 10.1016/j.apor.2023.103587
Zhang, K., Shen, Y., Palulli, R. , Ghobadian, A., Nouri, J. M. ORCID: 0000-0001-8610-3737 & Duwig, C. (2023). Combustion characteristics of steam-diluted decomposed ammonia in multiple-nozzle direct injection burner. International Journal of Hydrogen Energy, 48(42), pp. 16083-16099. doi: 10.1016/j.ijhydene.2023.01.091
Zhang, Y., Wang, Z., Kuang, H. , Fu, F. ORCID: 0000-0002-9176-8159 & Yu, A. (2023). Prediction of Surface settlement in Shield Tunneling Construction Process using PCA-PSO-RVM Machine Learning. Journal of Performance of Constructed Facilities, 37(3), article number 04023012. doi: 10.1061/jpcfev.cfeng-4363
Zhou, S-Q., Yang, Y-F. & Fu, F. ORCID: 0000-0002-9176-8159 (2023). Performance of SSC filled circular steel tube short columns under axial compression. Structures, 57, article number 105147. doi: 10.1016/j.istruc.2023.105147
2022
Aalinezhad, N. (2022). Mechanics of CSF in Human Ventricular System:Production and Circulation. (Unpublished Doctoral thesis, City, University of London)
Abay, T. Y. Y., Phillips, J. P. P., Uff, C. , Roldan, M. & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2022). In Vitro Evaluation of a Non-Invasive Photoplethysmography Based Intracranial Pressure Sensor. Applied Sciences, 13(1), article number 534. doi: 10.3390/app13010534
Abdan, S., Stosic, N. ORCID: 0000-0001-8034-4046, Kovacevic, A. ORCID: 0000-0002-8732-2242 , Smith, I. & Asati, N. (2022). Oil drag loss in oil-flooded, twin-screw compressors. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 237(4), pp. 1137-1144. doi: 10.1177/09544089221115493
Abdeldayem, A. A., White, M. ORCID: 0000-0002-7744-1993, Paggini, A. , Ruggiero, M. & Sayma, A. (2022). Integrated Aerodynamic and Structural Blade Shape Optimisation of Axial Turbines Operating with Supercritical Carbon Dioxide Blended with Dopants. Journal of Engineering for Gas Turbines and Power: Transactions of the ASME, 144(10), article number 101016. doi: 10.1115/1.4055232
Acarali, D. ORCID: 0000-0003-1787-6300, Rajesh Rao, K., Rajarajan, M. ORCID: 0000-0001-5814-9922 , Chema, D. & Ginzburg, M. (2022). Modelling smart grid IT-OT dependencies for DDoS impact propagation. Computers & Security, 112, article number 102528. doi: 10.1016/j.cose.2021.102528
Ahmad, H., Alias, M. A., Ismail, M. F. , Ismail, N. N., Zaini, M. K. A., Lim, K. S., Brambilla, G., Grattan, K. T. V. ORCID: 0000-0003-2250-3832 & Rahman, B. M. ORCID: 0000-0001-6384-0961 (2022). Strain Sensor Based on Embedded Fiber Bragg Grating in Thermoplastic Polyurethane Using the 3D Printing Technology for Improved Sensitivity. Photonic Sensors, 12(3), article number 220302. doi: 10.1007/s13320-021-0646-1
Ahmed, I. M. & Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 (2022). Shear connection of prefabricated ultra-lightweight concrete slab systems (PUSS™). Structures, 36, pp. 65-97. doi: 10.1016/j.istruc.2021.11.017
Al Aishan, Abdullah (2022). The Effects of Optical and Electrical Stimuli on Cell Responses During Wound Healing. (Unpublished Doctoral thesis, City, University of London)
Al-Halawani, R., Chatterjee, S. & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2022). Monte Carlo Simulation of the Effect of Human Skin Melanin in Light-Tissue Interactions. In: 2022 44th Annual International Conference of the IEEE Engineering in Medicine & Biology Society (EMBC). 44th Annual International Conference of the IEEE Engineering in Medicine & Biology Society (EMBC), 11-15 Jul 2022, Glasgow, Scotland, United Kingdom. doi: 10.1109/EMBC48229.2022.9871350
Alber, J., Manolesos, M. ORCID: 0000-0002-5506-6061, Weinzierl-Dlugosch, G. , Fischer, J., Schönmeier, A., Nayeri, C. N., Paschereit, C. O., Twele, J., Fortmann, J., Melani, P. F. & Bianchini, A. (2022). Experimental investigation of mini Gurney flaps in combination with vortex generators for improved wind turbine blade performance. Wind Energy Science, 7(3), pp. 943-965. doi: 10.5194/wes-7-943-2022
Alias, M. A., Ahmad, H., Samion, M. Z. , Sa'ad, M. S. M., Sing, L. K., Grattan, K. T. V. ORCID: 0000-0003-2250-3832, Rahman, B. M. ORCID: 0000-0001-6384-0961, Brambilla, G., Zaini, M. K. A., Bayang, L. & Ismail, M. F. (2022). Highly sensitive temperature-independent FBG-based sensor embedded in thermoplastic polyurethane using 3D printing technology for the measurements of torsion. Sensors and Actuators A: Physical, 346, article number 113889. doi: 10.1016/j.sna.2022.113889
Alias, M. A., Ismail, M. F., Sa'ad, M. S. M. , Zaini, M. K. A., Lim, K. S., Grattan, K. T. V. ORCID: 0000-0003-2250-3832, Brambilla, G., Rahman, B. M. ORCID: 0000-0001-6384-0961, Reduan, S. & Ahmad, H. (2022). A Hi h-Precision Extensometer System for Ground Displacement Measurement Using Fiber Bragg Grating. IEEE Sensors Journal, 22(9), pp. 8509-8521. doi: 10.1109/jsen.2022.3159850
Almadani, R. & Fu, F. ORCID: 0000-0002-9176-8159 (2022). Parametric Analysis of a Steel Frame under Fire Loading using Monte Carlo Simulation. fire, 5(1), article number 25. doi: 10.3390/fire5010025
Almutairi, F. F. & Tsavdaridis, K. ORCID: 0000-0001-8349-3979 (2022). The Effect of Degree of Composite Action on RWS Connections Subject to Cyclic Loading. In: STESSA 2022: Proceedings of the 10th International Conference on Behaviour of Steel Structures in Seismic Areas. The 10th International Conference on the Behaviour of Steel Structures in Seismic Areas, 25-27 May 2022, Timisoara, Romania. doi: 10.1007/978-3-031-03811-2_24
Anfossi, J., Al-Zaili, J. ORCID: 0000-0003-4072-2107, El Samad, T. ORCID: 0000-0003-1590-9885 & Sayma, A ORCID: 0000-0003-2315-0004 (2022). Performance Assessment of a Recuperated Turboshaft Engine: A Multifuel Case. In: Cycle Innovations; Cycle Innovations: Energy Storage. ASME Turbo Expo 2022: Turbomachinery Technical Conference and Exposition, 13-17 Jun 2022, Rotterdam, Netherlands. doi: 10.1115/GT2022-80455
Aydoğan, R., Criado, N., Lang, J. , Sanchez-Anguix, V. & Serramia, M. ORCID: 0000-0003-0993-024X (2022). Preface. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 13753 LNAI, pp. 20-36. doi: 10.1007/978-3-031-21203-1_2
Baig, J. A., Chandio, I. G., Kazi, T. G. , Afridi, H. I., Akhtar, K., Junaid, M., Naher, S. ORCID: 0000-0003-2047-5807, Solangi, S. A. & Malghani, N. A. (2022). Risk Assessment of Macronutrients and Minerals by Processed, Street, and Restaurant Traditional Pakistani Foods: a Case Study. Biological Trace Element Research, 201(7), pp. 3553-3566. doi: 10.1007/s12011-022-03429-7
Balatti, D., Haddad Khodaparast, H., Friswell, M. I. , Manolesos, M. ORCID: 0000-0002-5506-6061 & Amoozgar, M. (2022). The effect of folding wingtips on the worst-case gust loads of a simplified aircraft model. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 236(2), pp. 219-237. doi: 10.1177/09544100211010915
Balatti, D., Khodaparast, H. H., Friswell, M. I. & Manolesos, M. ORCID: 0000-0002-5506-6061 (2022). Improving Wind Tunnel "1-cos" Gust Profiles. Journal of Aircraft, 59(6), pp. 1514-1528. doi: 10.2514/1.c036772
Banerjee, J. R., Kennedy, D. & Elishakoff, I. (2022). Further Insights Into the Timoshenko–Ehrenfest Beam Theory. Journal of Vibration and Acoustics, 144(6), article number 061011. doi: 10.1115/1.4055974
Bashir, M. N., Saad, H. M., Rizwan, M. , Quazi, M. M., Ali, M. M., Ahmed, A., Zaidi, A. A., Soudagar, M. E. M., Haseeb, A. S. M. A. & Naher, S. ORCID: 0000-0003-2047-5807 (2022). Effects of tin particles addition on structural and mechanical properties of eutectic Sn–58Bi solder joint. Journal of Materials Science: Materials in Electronics, 33(28), pp. 22499-22507. doi: 10.1007/s10854-022-09028-5
Beemer, R. D., Li, L., Leonti, A. , Shaw, J., Fonseca, J. ORCID: 0000-0002-7654-6005, Valova, I., Iskander, M. & Pilskaln, C. H. (2022). Comparison of 2D Optical Imaging and 3D Microtomography Shape Measurements of a Coastal Bioclastic Calcareous Sand. Journal of Imaging, 8(3), article number 72. doi: 10.3390/jimaging8030072
Bidi, S., Koukouvinis, F., Papoutsakis, A. , Shams, A. & Gavaises, M. ORCID: 0000-0003-0874-8534 (2022). Numerical study of real gas effects during bubble collapse using a disequilibrium multiphase model. Ultrasonics Sonochemistry, 90, article number 106175. doi: 10.1016/j.ultsonch.2022.106175
Brooks, S. J. ORCID: 0000-0002-5712-7358 & Roy, R. ORCID: 0000-0001-5491-7437 (2022). Design and complexity evaluation of a self-cleaning heat exchanger. International Journal of Heat and Mass Transfer, 191, article number 122725. doi: 10.1016/j.ijheatmasstransfer.2022.122725
Budidha, K. ORCID: 0000-0002-6329-8399, Thaha, M. A., Eschbach, M. , Mejía-Mejía, E. ORCID: 0000-0002-5357-4329 & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2022). Proof-of-principle validation of a novel intraluminal optical sensor for dynamic monitoring of intestinal anastomosis: An in vivo animal model case study. In: Proceedings of IEEE Sensors. IEEE Sensors 2022, 30 Oct - 2 Nov 2022, Dallas, TX, USA. doi: 10.1109/SENSORS52175.2022.9967061
Bustos, A., Tomas-Rodriguez, M. ORCID: 0000-0001-9630-9579, Rubio, H. & Castejon, C. (2022). On the nonlinear hunting stability of a high-speed train bogie. Nonlinear Dynamics, 111(3), pp. 2059-2078. doi: 10.1007/s11071-022-07937-y
Cacciola, P., Shadlou, M., Ayoub, A. ORCID: 0000-0002-2670-9662 , Rashed, Y. & Tombari, A. (2022). Exploring the performances of the vibrating barriers for the seismic protection of the Zoser Pyramid. Scientific Reports, 12(1), article number 5542. doi: 10.1038/s41598-022-09444-x
Cai, B., Lin, X., Fu, F. ORCID: 0000-0002-9176-8159 & Wang, L. (2022). Postfire residual capacity of steel fiber reinforced volcanic scoria concrete using PSO-BPNN machine learning. Structures, 44, pp. 236-247. doi: 10.1016/j.istruc.2022.08.012
Cai, B., Lv, N. & Fu, F. ORCID: 0000-0002-9176-8159 (2022). Flexural performance of polypropylene fiber reinforced scoria aggregate concrete beams after exposure to elevated temperatures. Journal of Performance of Constructed Facilities, 36(3), article number 04022015. doi: 10.1061/(ASCE)CF.1943-5509.0001716
Cao, X., Ren, Y., Qian, K. , Fu, F. ORCID: 0000-0002-9176-8159 & Zhang, W. (2022). Size effect on flexural behavior of ultra-high-performance concrete beams with different reinforcement. Structures, 41, pp. 969-981. doi: 10.1016/j.istruc.2022.05.062
Cao, X., He, D., Qian, K. , Fu, F. ORCID: 0000-0002-9176-8159, Deng, X-F. & Wang, L. (2022). Shear Behavior of Glass FRP Bars-Reinforced Ultra-High Performance Concrete I-Shaped Beams. Structural Concrete, 24(1), pp. 1503-1520. doi: 10.1002/suco.202100801
Charlton, P. H., Kotzen, K., Mejía-Mejía, E. ORCID: 0000-0002-5357-4329 , Aston, P. J., Budidha, K., Mant, J., Pettit, C., Behar, J. A. & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2022). Detecting beats in the photoplethysmogram: benchmarking open-source algorithms. Physiological Measurement, 43(8), article number 085007. doi: 10.1088/1361-6579/ac826d
Charlton, P. H., Kyriacou, P. A. ORCID: 0000-0002-2868-485X, Mant, J. , Marozas, V., Chowienczyk, P. & Alastruey, J. (2022). Wearable Photoplethysmography for Cardiovascular Monitoring. Proceedings of the IEEE, 110(3), pp. 355-381. doi: 10.1109/jproc.2022.3149785
Charlton, P. H., Pilt, K. & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2022). Establishing best practices in photoplethysmography signal acquisition and processing. Physiological Measurement, 43(5), article number 050301. doi: 10.1088/1361-6579/ac6cc4
Chekakta, Z. ORCID: 0000-0002-4664-6283, Zenati, A., Aouf, N. ORCID: 0000-0001-9291-4077 & Dubois-Matra, O. (2022). Robust deep learning LiDAR-based pose estimation for autonomous space landers. Acta Astronautica, 201, pp. 59-74. doi: 10.1016/j.actaastro.2022.08.049
Chen, S., Zou, B., Han, C. & Yan, S. ORCID: 0000-0001-8968-6616 (2022). Comparative Study on Added Resistance and Seakeeping Performance of X-Bow and Wave-Piercing Monohull in Regular Head Waves. Journal of Marine Science and Engineering, 10(6), article number 813. doi: 10.3390/jmse10060813
Chen, X., Ming, Y., Fu, F. ORCID: 0000-0002-9176-8159 & Chen, P. (2022). Numerical and Empirical Models for Service Life Assessment of RC Structures in Marine Environment. International Journal of Concrete Structures and Materials, 16(1), article number 11. doi: 10.1186/s40069-022-00504-0
Chen, X., Ming, Y., Fu, F. ORCID: 0000-0002-9176-8159 & Chen, P. (2022). Numerical and empirical modeling for the assessment of service life of RC structures in marine environment. International Journal of Concrete Structures and Materials, 16(11), doi: 10.1186/s40069-022-00504-0
Cheng, Y., Dai, K., Liu, Y. , Yang, H., Sun, M., Huang, Z., Camara Casado, A. ORCID: 0000-0002-1675-2640 & Yin, Y. (2022). A Method for Along-wind Vibration Control of Chimneys by Tuning Liners. Engineering Structures, 252, article number 113561. doi: 10.1016/j.engstruct.2021.113561
Chng, L., Alber, J., Ntouras, D. , Papadakis, G., Kaufmann, N., Ouro, P. & Manolesos, M. ORCID: 0000-0002-5506-6061 (2022). On the combined use of Vortex Generators and Gurney Flaps for turbine airfoils. In: Journal of Physics: Conference Series. The Science of Making Torque from Wind (TORQUE) conference 2022, 1-3 Jun 2022, Delft, the Netherlands. doi: 10.1088/1742-6596/2265/3/032040
Comineli, O., Qaban, A. ORCID: 0000-0003-2982-8429 & Mintz, B. (2022). Influence of Cu and Ni on the Hot Ductility of Low C Steels with Respect to the Straightening Operation When Continuous Casting. Metals, 12(10), article number 1671. doi: 10.3390/met12101671
Corfar, D. A. & Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 (2022). 3D Modular Building Connections: A Review. In: CESARE Conference Publications. 3rd Coordinating Engineering for Sustainability And Resilience, 6-9 May 2022, Irbid, Jordan.
Corfar, D-A. & Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 (2022). A comprehensive review and classification of inter-module connections for hot-rolled steel modular building systems. Journal of Building Engineering, 50, article number 104006. doi: 10.1016/j.jobe.2022.104006
Corfar, D. ORCID: 0000-0002-9843-2973 & Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 (2022). A Novel Optimised Inter-Locking Connection for Steel Modular Building Systems to Enable Re-Use. ce/papers, 5(2), pp. 150-161. doi: 10.1002/cepa.1710
Court, A. & Bruecker, C. (2022). Spanwise Lift and Gust Control via Arrays of Bio-inspired Individually Actuated Pneumatic Flaplets. Paper presented at the 56th 3AF International Conference on Applied Aerodynamics, 28-30 Mar 2022, Toulose, France.
Cresswell-Boyes, A. J., Davis, G. R., Krishnamoorthy, M. , Mills, D. & Barber, A. H. ORCID: 0000-0003-3334-0266 (2022). Composite 3D printing of biomimetic human teeth. Scientific Reports, 12(1), article number 7830. doi: 10.1038/s41598-022-11658-y
Danieli, P., Lazzaretto, A., Al-Zaili, J. ORCID: 0000-0003-4072-2107 , Sayma, A. I., Masi, M. & Carraro, G. (2022). The potential of the natural gas grid to accommodate hydrogen as an energy vector in transition towards a fully renewable energy system. Applied Energy, 313, article number 118843. doi: 10.1016/j.apenergy.2022.118843
Deakin, M., Morstyn, T., Apostolopoulou, D. ORCID: 0000-0002-9012-9910 & McCulloch, M. D. (2022). Voltage control loss factors for quantifying DG reactive power control impacts on losses and curtailment. IET Generation, Transmission and Distribution, 16(10), pp. 2049-2062. doi: 10.1049/gtd2.12413
Degtyarev, V. & Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 (2022). Buckling and ultimate load prediction models for perforated steel beams using machine learning algorithms. Journal of Building Engineering, 51, article number 104316. doi: 10.1016/j.jobe.2022.104316
Deng, X., Dong, T., Fu, F. ORCID: 0000-0002-9176-8159 & Weng, Y. (2022). Resilience of Prefabricated Concrete Frames 1 using Hybrid Steel-Concrete Composite Connections. Journal of Building Engineering, 59, article number 105119. doi: 10.1016/j.jobe.2022.105119
Deshpande, P., Ravikumar, B. ORCID: 0000-0001-7095-2195, Tallur, S. , Paul, D. & Rai, B. (2022). Development of an insilico model of eccrine sweat using molecular modelling techniques. Scientific Reports, 12(1), article number 20263. doi: 10.1038/s41598-022-24440-x
Divall, S. ORCID: 0000-0001-9212-5115, Goodey, R. J., Lalicata, L. M. & Davies, M. C. R. (2022). Centrifuge Modelling of Long-term Tunnelling Ground Movements. In: Physical Modelling in Geotechnics. 10th International Conference on Physical Modelling in Geotechnics (ICPMG 2022), 19-23 Sep 2022, Daejeon, Korea.
Dixit, A., Smith-Creasey, M. & Rajarajan, M. ORCID: 0000-0001-5814-9922 (2022). A Decentralized IIoT Identity Framework based on Self-Sovereign Identity using Blockchain. In: 2022 IEEE 47th Conference on Local Computer Networks (LCN). 47th IEEE Conference on Local Computer Networks, 26-29 Sep 2022, Edmonton, Canada. doi: 10.1109/LCN53696.2022.9843700
Efthymiuo, E. & Camara Casado, A. ORCID: 0000-0002-1675-2640 (2022). Multi-angle and non-uniform ground motions on cable-stayed bridges. Earthquake Spectra, 38(2), pp. 1438-1462. doi: 10.1177/87552930211051393
El-Bashar, R., Hussein, M., Hegazy, S. F. , Badr, Y., Rahman, B. M. ORCID: 0000-0001-6384-0961, Grattan, K. T. V. ORCID: 0000-0003-2250-3832, Hameed, M. F. O. & Obayya, S. S. A. (2022). Electrical performance of efficient quad-crescent-shaped Si nanowire solar cell. Scientific Reports, 12(1), article number 48. doi: 10.1038/s41598-021-03597-x
Faisal, N. H., Ahmed, R., Sellami, N. , Prathuru, A., Njuguna, J., Venturi, F., Hussain, T., Yazdani Nezhad, H. ORCID: 0000-0003-0832-3579, Katiyar, N. K., Goel, S., Upadhyaya, H., Joshi, S., Muhammad-Sukki, F., Prabhu, R., Mallick, T., Whittow, W. & Kamnis, S. (2022). Thermal spray coatings for electromagnetic wave absorption and interference shielding: a review and future challenges. Advanced Engineering Materials, 24(7), article number 2200171. doi: 10.1002/adem.202200171
Farasati Far, B., Naimi-Jamal, M. R., Safaei, M. , Zarei, K. & Yazdani Nezhad, H. ORCID: 0000-0003-0832-3579 (2022). A Review on biomedical application of polysaccharide-based hydrogels with a focus on drug delivery systems. Polymers, 14(24), article number 5432. doi: 10.3390/polym14245432
Ferreira, F. P. V., Shamass, R., Santos, L. F. P. , Limbachiya, V. & Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 (2022). EC3 design of web-post buckling resistance for perforated steel beams with elliptically-based web openings. Thin-Walled Structures, 175, article number 109196. doi: 10.1016/j.tws.2022.109196
Fu, F. ORCID: 0000-0002-9176-8159 (2022). Studies on CFST column to steel beam joints using endplates and long bolts under central column removal. Steel and Composite Structures, 42(2), pp. 161-172. doi: 10.12989/scs.2022.42.2.161
Gaudron, R., Guzmán-Iñigo, J. ORCID: 0000-0002-1833-6034 & Morgans, A. S. (2022). Variation of Acoustic Energy Across Sudden Area Expansions Sustaining a Subsonic Flow. AIAA Journal, 61(1), pp. 378-390. doi: 10.2514/1.j061494
Ghanem, M. C., Chen, T. ORCID: 0000-0001-8037-1685 & Nepomuceno, E. G. (2022). Hierarchical reinforcement learning for efficient and effective automated penetration testing of large networks. Journal of Intelligent Information Systems, 60(2), pp. 281-303. doi: 10.1007/s10844-022-00738-0
Ghanem, M.C. (2022). Towards an efficient automation of network penetration testing using model-based reinforcement learning. (Unpublished Doctoral thesis, City, University of London)
Ghavami, M. ORCID: 0000-0002-0772-7726, Al-Zaili, J. ORCID: 0000-0003-4072-2107 & Sayma, A. I. ORCID: 0000-0003-2315-0004 (2022). A methodology for techno-economic and operation strategy optimisation of micro gas turbine-based solar powered dish-engine systems. Energy, 251, article number 123873. doi: 10.1016/j.energy.2022.123873
Ghosh, S., Dissanayake, K. P. W., Asokan, S. , Sun, T. ORCID: 0000-0003-3861-8933, Rahman, B. M. ORCID: 0000-0001-6384-0961 & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2022). Lead (Pb2+) ion sensor development using optical fiber gratings and nanocomposite materials. Sensors and Actuators B: Chemical, 364, article number 131818. doi: 10.1016/j.snb.2022.131818
Gidado, I. M., Qassem, M., Triantis, I. F. & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2022). Review of Advances in the Measurement of Skin Hydration Based on Sensing of Optical and Electrical Tissue Properties. Sensors, 22(19), article number 7151. doi: 10.3390/s22197151
Glick, R. ORCID: 0000-0001-7789-9358, Muthuramalingam, M. & Brücker, C. ORCID: 0000-0001-5834-3020 (2022). Sea lions could use multilateration localization for object tracking as tested with bio-inspired whisker arrays. Scientific Reports, 12(1), article number 11764. doi: 10.1038/s41598-022-15904-1
Gong, J., Li, Y., Cui, M. , Yan, S. ORCID: 0000-0001-8968-6616 & Ma, Q. ORCID: 0000-0001-5579-6454 (2022). Study on the surf-riding and broaching of trimaran in oblique stern waves. Ocean Engineering, 266(4), article number 112995. doi: 10.1016/j.oceaneng.2022.112995
Gong, J., Li, Y., Yan, S. ORCID: 0000-0001-8968-6616 & Ma, Q. ORCID: 0000-0001-5579-6454 (2022). Numerical simulation of turn and zigzag Maneuvres of trimaran in calm water and waves by a hybrid method. Ocean Engineering, 253, article number 111239. doi: 10.1016/j.oceaneng.2022.111239
Gong, J., Li, Y., Yan, S. ORCID: 0000-0001-8968-6616 , Ma, Q. ORCID: 0000-0001-5579-6454 & Hong, Z. (2022). Numerical Study on the Motion and Added Resistance of a Trimaran in Stern Waves Using a Hybrid Method. International Journal of Offshore and Polar Engineering, 32(1), pp. 49-57. doi: 10.17736/ijope.2022.jc840
Gong, P., Chen, T. ORCID: 0000-0001-8037-1685, Xu, P. & Chen, Q. (2022). DS-SWIPT: Secure Communication with Wireless Power Transfer for Internet of Things. Security and Communication Networks, 2022, pp. 1-11. doi: 10.1155/2022/2650474
Gong, W., Hu, J., Wang, Z. , Wei, Y., Li, Y., Zhang, T., Zhang, Q., Liu, T., Ning, Y., Zhang, W. & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2022). Recent advances in laser gas sensors for applications to safety monitoring in intelligent coal mines. Frontiers in Physics, 10, article number 1058475. doi: 10.3389/fphy.2022.1058475
Goodey, R. J., Divall, S. ORCID: 0000-0001-9212-5115 & Le, B. T. (2022). Surface settlements arising from elliptical shaft excavation in clay. International Journal of Physical Modelling in Geotechnics, 23(5), pp. 262-271. doi: 10.1680/jphmg.21.00080
Guzmán-Iñigo, J. ORCID: 0000-0002-1833-6034, Yang, D., Gaudron, R. & Morgans, A. S. (2022). On the scattering of entropy waves at sudden area expansions. Journal of Sound and Vibration, 540, article number 117261. doi: 10.1016/j.jsv.2022.117261
He, Z., Guan, W., Wang, C. , Guo, G., Zhang, L. & Gavaises, M. ORCID: 0000-0003-0874-8534 (2022). Assessment of turbulence and cavitation models in prediction of vortex induced cavitating flow in fuel injector nozzles. International Journal of Multiphase Flow, 157, article number 104251. doi: 10.1016/j.ijmultiphaseflow.2022.104251
He, J., Jia, M., Gao, S. , Li, W., Lu, D. & Fu, F. ORCID: 0000-0002-9176-8159 (2022). Hysteretic Behavior and Multi-Wave Buckling of Assembled Buckling-Restrained Braces Wrapped with Fiber Clothes. International Journal of Structural Stability and Dynamics, 22(03n04), article number 2240004. doi: 10.1142/s0219455422400041
Heidari-Koochi, M. ORCID: 0000-0001-9865-697X, Karathanassis, I. K. ORCID: 0000-0001-9025-2866, Koukouvinis, P. ORCID: 0000-0002-3945-3707 , Hwang, J., Pickett, L. M., Spivey, D. & Gavaises, M. ORCID: 0000-0003-0874-8534 (2022). Flow visualisation in real-size optical injectors of conventional, additised, and renewable gasoline blends. Energy Conversion and Management, 252, article number 115109. doi: 10.1016/j.enconman.2021.115109
Heidarzadeh, G. (2022). Numerical modelling of bond behaviour of FRP bar reinforced concrete beam under high strain rate impact load. (Unpublished Doctoral thesis, City, University of London)
Hwaidi, J. F. & Chen, T. ORCID: 0000-0001-8037-1685 (2022). Classification of Motor Imagery EEG Signals Based on Deep Autoencoder and Convolutional Neural Network Approach. IEEE Access, 10, pp. 48071-48081. doi: 10.1109/access.2022.3171906
Hwang, J., Lee, P., Karathanasis, I. ORCID: 0000-0001-9025-2866 , Koukouvinis, F., Tagliante, F., Nguyen, T. & Pickett, L. (2022). A New Pathway for Prediction of Gasoline Sprays using Machine-Learning Algorithms. SAE Technical Papers, 5(1), pp. 343-356. doi: 10.4271/2022-01-0492
Ivanik, O., Fonseca, J. ORCID: 0000-0002-7654-6005, Shabatura, O. , Khomenko, R., Hadiatska, K. & Kravchenko, D. (2022). An integrated approach for landslide hazard assessment: A case study of the Middle Dnieper Basin, Ukraine. Journal of Water and Land Development, 52(I-III), pp. 81-86. doi: 10.24425/jwld.2021.139947
Jagdale, S., Ma, Q. ORCID: 0000-0001-5579-6454 & Yan, S. ORCID: 0000-0001-8968-6616 (2022). Springing Response of a Tension-Leg-Platform Wind Turbine Excited by Third-Harmonic Force in Nonlinear Regular Wave. International Journal of Offshore and Polar Engineering, 32(3), pp. 338-347. doi: 10.17736/ijope.2022.sh30
Jebelli, M. & Masdari, M. ORCID: 0000-0002-1159-2406 (2022). Interaction of free oscillating flat plate and VIV of a circular cylinder in laminar flow. Journal of Fluids and Structures, 113, article number 103648. doi: 10.1016/j.jfluidstructs.2022.103648
Jebelli, M. & Masdari, M. ORCID: 0000-0002-1159-2406 (2022). Interaction of two parallel free oscillating flat plates and VIV of an upstream circular cylinder in laminar flow. Ocean Engineering, 259, article number 111876. doi: 10.1016/j.oceaneng.2022.111876
Justino Vaz, M. G., Geber, E., Koukouvinis, F. , Karathanasis, I. ORCID: 0000-0001-9025-2866, Rodriguez Fernandez, C., Gavaises, M. & Mouokue, G. (2022). Numerical simulation of multicomponent diesel fuel spray surrogates using realfluid thermodynamic modelling. SAE Technical Papers, 2022-0(2022), article number 2022-01-05. doi: 10.4271/2022-01-0509
Khaleque, T., Vagias, I., Skordos, A. & Yazdani Nezhad, H. ORCID: 0000-0003-0832-3579 (2022). Contactless Dielectric Process Monitoring (CDPM) of Polymer Composites Manufacturing. Paper presented at the The 20th European Conference on Composite Materials, 26-30 Jun 2022, Lausanne, Switzerland.
Kim, J-H., Choi, K-S., Lacagnina, G. , Chaitanya, P., Joseph, P., Hasheminejad, S. M., Chong, T. P., Shahab, M. F., Omidyeganeh, M. ORCID: 0000-0002-4140-2810 & Pinelli, A. ORCID: 0000-0001-5564-9032 (2022). Aerodynamic and Aeroacoustic Optimization of Leading-Edge Undulation of a NACA 65(12)-10 Airfoil. AIAA JOURNAL, 60(4), pp. 2342-2353. doi: 10.2514/1.j060716
Kolakkattil, R., Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 & Sanjeevi, A. J. (2022). The effect of edge valency on the load resistance of single-layer reticulated cylindrical shells. Journal of Constructional Steel Research, 198, article number 107531. doi: 10.1016/j.jcsr.2022.107531
Kolakkattil, R., Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 & Jayachandran, A. S. (2022). Imperfection Sensitivity Of Non-triangulated Cylindrical Shell Configurations. In: The Proceeding of the Tenth International Conference on Advances in Steel Structures. The Tenth International Conference on Advances in Steel Structures (ICASS’2020), 21-23 Aug 2022, Chengdu, China. doi: 10.18057/ICASS2020.P.280
Kolakkattil, R., Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 & Sanjeevi, A. J. (2022). Global stability of single-layer reticulated domes based on the valency of structural elements. In: Proceedings of the Annual Stability Conference Structural Stability Research Council. Structural Stability Research Council Conference 2022, 22-25 Mar 2022, United States of America.
Koukouvinis, F. ORCID: 0000-0002-3945-3707, Rodriguez, C., Hwang, J. , Karathanassis, I. K. ORCID: 0000-0001-9025-2866, Gavaises, M. ORCID: 0000-0003-0874-8534 & Pickett, L. (2022). Machine Learning and transcritical sprays: A demonstration study of their potential in ECN Spray-A. International Journal of Engine Research, 23(9), pp. 1556-1572. doi: 10.1177/14680874211020292
Kumar, N., Pai, R., Abdul Khader, S. M. , Khan, S. ORCID: 0000-0001-5589-6914 & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2022). Influence of blood pressure and rheology on oscillatory shear index and wall shear stress in the carotid artery. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44(11), article number 510. doi: 10.1007/s40430-022-03792-5
Kumar, R., Nguyen, H., Rente, B. , Tan, C., Sun, T. & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2022). A Portable ‘Plug-and-Play’ Fibre Optic Sensor for In-Situ Measurements of pH Values for Microfluidic Applications. Micromachines, 13(8), article number 1224. doi: 10.3390/mi13081224
Kumar Bhoi, N., Singh, H., Pratap, S. , Naher, S. ORCID: 0000-0003-2047-5807 & Jain, P. K. (2022). Zinc oxide nanorods effect in micro structural and mechanical characteristics of aluminium composite material. Materials Science and Engineering: B, 278, article number 115641. doi: 10.1016/j.mseb.2022.115641
Kumthekar, A., Ponnusami, S. A. ORCID: 0000-0002-2143-8971, van der Zwaag, S. & Turteltaub, S. (2022). Uncertainty quantification of the lifetime of self-healing thermal barrier coatings based on surrogate modelling of thermal cyclic fracture and healing. Materials and Design, 221, article number 110973. doi: 10.1016/j.matdes.2022.110973
Kyriacou, P. A. ORCID: 0000-0002-2868-485X & Chatterjee, S. (2022). The origin of photoplethysmography. In: Allen, J. & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (Eds.), Photoplethysmography. (pp. 17-43). London, UK: Elsevier. doi: 10.1016/b978-0-12-823374-0.00004-9
Lalicata, L. M., Stallebrass, S. E. ORCID: 0000-0002-3747-9524, McNamara, A. M. ORCID: 0000-0002-3452-0800 & Panchal, J. P. (2022). Design method for the 'impression pile'. Proceedings of the Institution of Civil Engineers: Geotechnical Engineering, 175(1), pp. 75-85. doi: 10.1680/jgeen.21.00033
Lanchi, M., Al-Zaili, J. ORCID: 0000-0003-4072-2107, Russo, V. , Falchetta, M., Montecchi, M. & Aichmayer, L. (2022). A Quasi-Steady State Model of a Solar Parabolic Dish Micro Gas Turbine Demonstration Plant. Energies, 15(3), article number 1059. doi: 10.3390/en15031059
Lemonis, M., Daramara, A., Georgiadou, A. , Siorikis, V., Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 & Asteris, P. (2022). Ultimate Axial Load of Rectangular Concrete-filled Steel Tubes Using Multiple ANN Activation Functions. Steel and Composite Structures: an international journal, 42(4), pp. 459-475. doi: 10.12989/scs.2022.42.4.459
Li, Y., Li, K., Liu, X. , Li, X., Zhang, Li, Rente, B., Sun, T. ORCID: 0000-0003-3861-8933 & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2022). A hybrid machine learning framework for joint SOC and SOH estimation of lithium-ion batteries assisted with fiber sensor measurements. Applied Energy, 325, article number 119787. doi: 10.1016/j.apenergy.2022.119787
Li, D., Barrington, J., James, S. , Ayre, D., Sloma, M., Lin, M-F. & Yazdani Nezhad, H. ORCID: 0000-0003-0832-3579 (2022). Electromagnetic Field Controlled Domain Wall Displacement for Induced Strain Tailoring in BaTiO3-Epoxy Nanocomposite. Scientific Reports, 12(1), article number 7504. doi: 10.1038/s41598-022-11380-9
Li, D., Barrington, J., James, S. , Ayre, D., Sloma, M., Lin, M-F. & Yazdani Nezhad, H. ORCID: 0000-0003-0832-3579 (2022). Remote Field Induced Response of Polymer Nanocomposites Embedded with Sur face-functionalised Dielectric Nanoparticles. Paper presented at the The 20th European Conference on Composite Materials, 26-30 Jun 2022, Lausanne, Switzerland.
Li, Z. & Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 (2022). Limited-damage 3D-printed interlocking connection for timber volumetric structures: Experimental validation and computational modelling. Journal of Building Engineering, 63, article number 105373. doi: 10.1016/j.jobe.2022.105373
Lin, Y., Palaniappan, R., De Wilde, P. & Li, L. ORCID: 0000-0002-4026-0216 (2022). Reliability Analysis for Finger Movement Recognition With Raw Electromyographic Signal by Evidential Convolutional Networks. IEEE Transactions on Neural Systems and Rehabilitation Engineering, 30, pp. 96-107. doi: 10.1109/tnsre.2022.3141593
Liu, X., Lu, Z., Adhikari, S. , Li, Y. L. & Banerjee, J. R. (2022). Exact wave propagation analysis of lattice structures based on the dynamic stiffness method and the Wittrick–Williams algorithm. Mechanical Systems and Signal Processing, 174, article number 109044. doi: 10.1016/j.ymssp.2022.109044
Liu, X., Qiu, S., Xie, S. & Banerjee, R. (2022). Extension of the Wittrick-Williams Algorithm for Free Vibration Analysis of Hybrid Dynamic Stiffness Models Connecting Line and Point Nodes. Mathematics, 10(1), article number 57. doi: 10.3390/math10010057
Liu, X., Zhao, Y., Zhou, W. & Banerjee, J. R. (2022). Dynamic stiffness method for exact longitudinal free vibration of rods and trusses using simple and advanced theories. Applied Mathematical Modelling, 104, pp. 401-420. doi: 10.1016/j.apm.2021.11.023
Livada, M. ORCID: 0000-0002-0432-872X & Leventides, J. (2022). The Implicit McMillan degree and network descriptions. IMA Journal of Mathematical Control and Information, 39(2), pp. 564-589. doi: 10.1093/imamci/dnac012
Lu, Y., Rane, S. & Kovacevic, A. ORCID: 0000-0002-8732-2242 (2022). Evaluation of cut cell cartesian method for simulation of a hook and claw type hydrogen pump. International Journal of Hydrogen Energy, 47(54), pp. 23006-23018. doi: 10.1016/j.ijhydene.2022.05.110
MASDARI, M. ORCID: 0000-0002-1159-2406, ZEINALZADEH, A., ABDI, M. A. & SOLTANI, M. R. (2022). Experimental investigation of shock-buffet criteria on a pitching airfoil. Chinese Journal of Aeronautics, 35(7), pp. 179-191. doi: 10.1016/j.cja.2021.08.028
Ma, Z., Zhang, H., Fu, H. , Fonseca, J. ORCID: 0000-0002-7654-6005, Yang, Y., Du, M. & Zhang, H. (2022). Modelling flow-induced microstructural segregation in semi-solid metals. Materials & Design, 213, article number 110364. doi: 10.1016/j.matdes.2021.110364
Mahmood, A. ORCID: 0000-0002-6647-3682, Haseeb, A., Rozali, S. , Brabazon, D., Rahman, B. M. A. ORCID: 0000-0001-6384-0961, Grattan, K. T. V. ORCID: 0000-0003-2250-3832 & Naher, S. (2022). Synthesis of ZnO and CuO Nanowires by Thermal Oxidation on Metallic Substrates. Key Engineering Materials, 926, pp. 1703-1712. doi: 10.4028/p-qvfxm2
Mahmoud, M. (2022). Investigation on coupling Organic Rankine Cycle with a shallow ground-based cooling system. (Unpublished Doctoral thesis, City, University of London)
Mahmoud, M., Alkhedher, M., Ramadan, M. , Naher, S. ORCID: 0000-0003-2047-5807 & Pullen, K. (2022). An investigation on organic Rankine cycle incorporating a ground-cooled condenser: Working fluid selection and regeneration. Energy, 249, article number 123742. doi: 10.1016/j.energy.2022.123742
Mahmoud, M., Alkhedher, M., Ramadan, M. , Pullen, K. R. ORCID: 0000-0001-8501-9226, Olabi, A-G. & Naher, S. ORCID: 0000-0003-2047-5807 (2022). Experimental investigation into the potential of using a shallow ground-cooled condenser in Lebanon. Energy Conversion and Management, 264, article number 115729. doi: 10.1016/j.enconman.2022.115729
Mahmoud, M., Ramadan, M., Pullen, K. R. ORCID: 0000-0001-8501-9226 , Abdelkareem, M. A., Olabi, A. G. & Naher, S. ORCID: 0000-0003-2047-5807 (2022). An Investigation on Nano-Enhanced Phase Change Materials: Carbon-Based Nanoparticles. Key Engineering Materials, 922, pp. 11-16. doi: 10.4028/p-m17i9f
Manolesos, M. ORCID: 0000-0002-5506-6061 (2022). Vortex identification methods applied to wind turbine tip vortices. Wind Energy Science, 7(2), pp. 585-602. doi: 10.5194/wes-7-585-2022
Marinopoulou, E., Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 & Efthymiou, E. (2022). Modern Design Methods of Novel Optimised Aluminium Profiles. Buildings, 12(11), article number 1904. doi: 10.3390/buildings12111904
Matuzović, M., Rane, S. ORCID: 0000-0002-8732-2242, Patel, B. , Kovacevic, A. & Tuković, Ž. (2022). Analysis of conjugate heat transfer in a roots blower and validation with infrared thermography. International Journal of Thermofluids, 16, article number 100234. doi: 10.1016/j.ijft.2022.100234
May, J. M. ORCID: 0000-0002-8659-756X, Nomoni, M., Budidha, K. , Choi, C. & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2022). Mechanical Testing of Artificial Vessels and Tissues for Photoplethysmography Phantoms. In: 2022 44th Annual International Conference of the IEEE Engineering in Medicine & Biology Society (EMBC). 44th Annual International Conference of the IEEE Engineering in Medicine & Biology Society, 11-15 Jul 2022, Glasgow, United Kingdom. doi: 10.1109/embc48229.2022.9871830
Mejía-Mejía, E. ORCID: 0000-0002-5357-4329, Budidha, K., Kyriacou, P. A. ORCID: 0000-0002-2868-485X & Mamouei, M. H. (2022). Comparison of pulse rate variability and morphological features of photoplethysmograms in estimation of blood pressure. Biomedical Signal Processing and Control, 78, article number 103968. doi: 10.1016/j.bspc.2022.103968
Mejía-Mejía, E. ORCID: 0000-0002-5357-4329 & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2022). Outlier Management for Pulse Rate Variability Analysis from Photoplethysmographic Signals. 2022 44th Annual International Conference of the IEEE Engineering in Medicine & Biology Society (EMBC), 2022-J, pp. 649-652. doi: 10.1109/embc48229.2022.9871942
Mejía-Mejía, E. ORCID: 0000-0002-5357-4329 & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2022). Photoplethysmography-Based Pulse Rate Variability and Haemodynamic Changes in the Absence of Heart Rate Variability: An In-Vitro Study. Applied Sciences, 12(14), article number 7238. doi: 10.3390/app12147238
Mejía-Mejía, E. ORCID: 0000-0002-5357-4329 & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2022). Spectral analysis for pulse rate variability assessment from simulated photoplethysmographic signals. Frontiers in Physiology, 13, article number 966130. doi: 10.3389/fphys.2022.966130
Mergos, P. E. ORCID: 0000-0003-3817-9520 (2022). Surrogate-based optimum design of 3D reinforced concrete building frames to Eurocodes. Developments in the Built Environment, 11, article number 100079. doi: 10.1016/j.dibe.2022.100079
Mergos, P. E. ORCID: 0000-0003-3817-9520 & Yang, X-S. (2022). Flower Pollination Algorithm with Pollinator Attraction. Evolutionary Intelligence, 16(3), pp. 873-889. doi: 10.1007/s12065-022-00700-7
Midmer, A. & Bruecker, C. ORCID: 0000-0001-5834-3020 (2022). Nature-inspired self-adaptive wingtip for vortex mitigation. In: The Aeronautical Journal. RAeS Applied Aerodynamics Conference 2022, 13-15 Sep 2022, London, UK.
Mikes, I. G., Kappos, A. J. & Giaralis, A. ORCID: 0000-0002-2952-1171 (2022). Effect of abutment-backfill limit state definition on the assessment of seismic performance. In: Proceedings of the International Conference on Natural Hazards and Infrastructure. 3rd International Conference on Natural Hazards & Infrastructure, 5-7 Jul 2022, Athens, Greece.
Mintz, B. & Qaban, A. ORCID: 0000-0003-2982-8429 (2022). The Influence of Precipitation, High Levels of Al, Si, P and a Small B Addition on the Hot Ductility of TWIP and TRIP Assisted Steels: A Critical Review. Metals, 12(3), article number 502. doi: 10.3390/met12030502
Mishra, R., Li, D., Chianella, I. , Goel, S. & Yazdani Nezhad, H. ORCID: 0000-0003-0832-3579 (2022). Electromagnetic field induced extrinsic strains in BaTiO3-epoxy nanocomposite: a contact-less mechanical property tailoring smart material. Paper presented at the The 20th European Conference on Composite Materials, 26-30 Jun 2022, Lausanne, Switzerland.
Monti, A., Nicholas, S., Omidyeganeh, M. ORCID: 0000-0002-4140-2810 , Pinelli, A. ORCID: 0000-0001-5564-9032 & Rosti, M. E. (2022). On the solidity parameter in canopy flows. Journal of Fluid Mechanics, 945, article number A17. doi: 10.1017/jfm.2022.551
Moslem, F., Masdari, M. ORCID: 0000-0002-1159-2406, Fedir, K. & Moslem, B. (2022). Experimental investigation into the aerodynamic and aeroacoustic performance of bioinspired small-scale propeller planforms. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 237(1), pp. 75-90. doi: 10.1177/09544100221091322
Mousavi, M., Masdari, M. ORCID: 0000-0002-1159-2406 & Tahani, M. (2022). Power performance enhancement of vertical axis wind turbines by a novel gurney flap design. Aircraft Engineering and Aerospace Technology, 94(4), pp. 482-491. doi: 10.1108/aeat-02-2021-0052
Mudhar, R., Mucolli, A., Ford, J. , Lira, C. & Yazdani Nezhad, H. ORCID: 0000-0003-0832-3579 (2022). Electrical and Magnetic Properties of 3D Printed Integrated Conductive Biodegradable Polymer Nanocomposites for Sustainable Electronics Development. Journal of Composites Science, 6(11), article number 345. doi: 10.3390/jcs6110345
Munmulla, T., Navaratnam, S., Thamboo, J. , Ponnampalam, T., Damruwan, H-G. H., Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 & Zang, G. (2022). Analyses of Structural Robustness of Prefabricated Modular Buildings: A Case Study on Mid-Rise Building Configurations. Buildings, 12(8), article number 1289. doi: 10.3390/buildings12081289
Nakka, R., Harursampath, D., Pathan, M. V. & Ponnusami, S. A. ORCID: 0000-0002-2143-8971 (2022). A computationally efficient approach for generating RVEs of various inclusion/fiber shapes. Composite Structures, 291, article number 115560. doi: 10.1016/j.compstruct.2022.115560
Nasir Bashir, M., Saad, H. M., Rizwan, M. , Bingöl, S., Channa, I. A., Gul, M., Haseeb, A. S. M. A. & Naher, S. ORCID: 0000-0003-2047-5807 (2022). Effect of cobalt nanoparticles on mechanical properties of Sn–58Bi solder joint. Journal of Materials Science: Materials in Electronics, 33(28), pp. 22573-22579. doi: 10.1007/s10854-022-09035-6
Nicholas, S (2022). High fidelity simulation of turbulent flows over filamentous surfaces. (Unpublished Doctoral thesis, City, University of London)
Nicholas, S., Omidyeganeh, M. ORCID: 0000-0002-4140-2810 & Pinelli, A. ORCID: 0000-0001-5564-9032 (2022). Numerical Investigation of Regime Transition in Canopy Flows. Flow, Turbulence and Combustion, 109(4), pp. 1133-1153. doi: 10.1007/s10494-022-00363-5
Nikolić, B. & Khan, S. ORCID: 0000-0001-5589-6914 (2022). Modelling and design of low-power, non-conventional current sensors based on smart materials for high-voltage transmission lines. Measurement Science and Technology, 34(3), article number 035104. doi: 10.1088/1361-6501/ac9daf
Nouri, J. M. ORCID: 0000-0001-8610-3737, Vasilakos, I. & Yan, Y. ORCID: 0000-0003-1124-4724 (2022). Cavitation between cylinder-liner and piston-ring in a new designed optical IC engine. International Journal of Engine Research, 23(7), pp. 1144-1158. doi: 10.1177/14680874211008007
Nykteri, G. & Gavaises, M. ORCID: 0000-0003-0874-8534 (2022). Numerical modelling of droplet rim fragmentation by laser-pulse impact using a multiscale two-fluid approach. Physical Review Fluids, 7(10), article number 103604. doi: 10.1103/PhysRevFluids.7.103604
Obaideen, K., Yousef, B. A. A., AlMallahi, M. N. , Tan, Y. C., Mahmoud, M., Jaber, H. & Ramadan, M. (2022). An overview of smart irrigation systems using IoT. Energy Nexus, 7, article number 100124. doi: 10.1016/j.nexus.2022.100124
Paek, S. W. ORCID: 0000-0001-6447-895X, Balasubramanian, S. & Stupples, D. (2022). Composites Additive Manufacturing for Space Applications: A Review. Materials, 15(13), article number 4709. doi: 10.3390/ma15134709
Papkov, S. O. & Banerjee, J. R. (2022). Dynamic stiffness formulation for isotropic and orthotropic plates with point nodes. Computers & Structures, 270, article number 106827. doi: 10.1016/j.compstruc.2022.106827
Papoutsakis, A. ORCID: 0000-0002-5449-5921, Danaila, I., Luddens, F. & Gavaises, M. (2022). Droplet nuclei caustic formations in exhaled vortex rings. Scientific Reports, 12(1), article number 3892. doi: 10.1038/s41598-022-07717-z
Paprocki, S., Qassem, M. & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2022). Review of Ethanol Intoxication Sensing Technologies and Techniques. Sensors, 22(18), article number 6819. doi: 10.3390/s22186819
Pathak, A. K., Rahman, B. M. ORCID: 0000-0001-6384-0961 & Viphavakit, C. (2022). Nanowire Embedded Micro-Drilled Dual-Channel Approach to Develop Highly Sensitive Biosensor. IEEE Photonics Technology Letters, 34(13), pp. 707-710. doi: 10.1109/lpt.2022.3182783
Pearson, C., Hawi, S., Lira, C. , Goel, S. & Yazdani Nezhad, H. ORCID: 0000-0003-0832-3579 (2022). Magnetic field assisted 3D printing of short carbon fibre-reinforced polymer composites. In: Materials Today: Proceedings. 2nd International Conference Innovative Technologies in Mechanical Engineering, 17-18 De 2021, Ghaziabad, India. doi: 10.1016/j.matpr.2022.04.597
Piernikowska, S., Tomas-Rodriguez, M. ORCID: 0000-0001-9630-9579 & Santos Penas, M. (2022). Floating offshore wind turbine stability study under self-induced vibrations. In: Guedes Soares, C & Santos, TA (Eds.), Trends in Maritime Technology and Engineering. International Conference on Maritime Technology and Engineering (MARTECH 2022), 24-26 May 2022, Lisbon, Portugal. doi: 10.1201/9781003320289
Plantegenet, T. ORCID: 0000-0003-0585-3726, Arghir, M. & Mahfoud, J. (2022). Experimental Identification of Dynamic Coefficients of Fluid Film Bearings by Using Electro-Magnetic Actuator. Paper presented at the 17th International Symposium on Magnetic Bearings, 18-19 Aug 2022, Rio de Janeiro, Brazil.
Plantegenet, T. ORCID: 0000-0003-0585-3726, Tam, T., Kovacevic, A. ORCID: 0000-0002-8732-2242 , Rane, S., Patel, B., Krupa, A., Leach, R. K., Lawson, D., Heiyantuduwa, M., Milligan, B. & Ure, J. (2022). Systematic engineering design approach for improvement of oil-free twin-screw compressors. IOP Conference Series: Materials Science and Engineering, 1267(1), article number 012002. doi: 10.1088/1757-899x/1267/1/012002
Ponnusami, S. A. ORCID: 0000-0002-2143-8971, Cui, H., Erice, B. , Lißner, M., Pathan, M. & Petrinic, N. (2022). An integrated inverse numerical–experimental approach to determine the dynamic Mode-I interlaminar fracture toughness of fibre composites. Composite Structures, 293, article number 115734. doi: 10.1016/j.compstruct.2022.115734
Ponnusami, S. A. ORCID: 0000-0002-2143-8971, Krishnasamy, J., Turteltaub, S. & van der Zwaag, S. (2022). Elucidating the effect of cohesive zone length in fracture simulations of particulate composites. Engineering Fracture Mechanics, 268, article number 108431. doi: 10.1016/j.engfracmech.2022.108431
Qian, K., Geng, S., Liang, S. , Fu, F. ORCID: 0000-0002-9176-8159 & Yu, J. (2022). Effects of loading regimes on the structural behavior of RC beam-column subassemblages against disproportionate collapse. Engineering Structures, 251(A), article number 113470. doi: 10.1016/j.engstruct.2021.113470
Qian, K., Lan, D., Zhang, L. , Fu, F. ORCID: 0000-0002-9176-8159 & Fang, Q. (2022). Robustness of Post-Tensioned Concrete Beam-Column Sub-assemblies under Various Column Removal Scenarios. Journal of Structural Engineering, 148(5), article number 04022032. doi: 10.1061/(ASCE)ST.1943-541X.0003324
Rahman, B. M. A. ORCID: 0000-0001-6384-0961, Viphavakit, C., Chitaree, R. , Ghosh, S., Pathak, A. K., Verma, S. & Sakda, N. (2022). Optical Fiber, Nanomaterial, and THz-Metasurface-Mediated Nano-Biosensors: A Review. Biosensors, 12(1), article number 42. doi: 10.3390/bios12010042
Rajana, K. & Giaralis, A. ORCID: 0000-0002-2952-1171 (2022). A hybrid nonlinear rooftop isolated tuned mass damper-inerter system for seismic protection of building structures. In: Proceedings of the International Conference on Natural Hazards and Infrastructure. 3rd International Conference on Natural Hazards & Infrastructure, 5-7 Jul 2022, Athens, Greece.
Rajendran, S., Mohan, D., Roy S, D. , Salam, B. A., Avudaiappan, S. & Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 (2022). Behaviour of Cold-Formed Steel-Concrete Composite Columns under Axial Compression: Experimental and Numerical Study. Structures, 44, pp. 487-502. doi: 10.1016/j.istruc.2022.07.086
Ramchandran, G., Rane, S., Kovacevic, A. ORCID: 0000-0002-8732-2242 , Hoehn, C. & Sieder, S. (2022). Computational Modeling of Twin Screw Pumps for Thermal Management Applications. SAE International Journal of Passenger Vehicle Systems, 15(1), pp. 47-59. doi: 10.4271/15-15-01-0004
Roldan, M. & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2022). Head Phantom Optical Properties Validation for Near-Infrared Measurements: A Comparison with Animal Tissue. In: 2022 44th Annual International Conference of the IEEE Engineering in Medicine & Biology Society (EMBC). 44th Annual International Conference of the IEEE Engineering in Medicine & Biology Society (EMBC), 11-15 Jul 2022, Glasgow, Scotland, United Kingdom. doi: 10.1109/EMBC48229.2022.9871103
Rout, S., Nayak, R. K., Patnaik, S. C. & Yazdani Nezhad, H. ORCID: 0000-0003-0832-3579 (2022). Development of Improved Flexural and Impact Performance of Kevlar/Carbon/Glass Fibers Reinforced Polymer Hybrid Composites. Journal of Composites Science, 6(9), article number 245. doi: 10.3390/jcs6090245
Rumney, R. M. H., Robson, S. C., Kao, A. P. , Barbu, E., Bozycki, L., Smith, J. R., Cragg, S. M., Couceiro, F., Parwani, R., Tozzi, G., Stuer, M., Barber, A. H. ORCID: 0000-0003-3334-0266, Ford, A. T. & Gorecki, D. C. (2022). Biomimetic generation of the strongest known biomaterial found in limpet tooth. Nature Communications, 13(1), article number 3753. doi: 10.1038/s41467-022-31139-0
Sahin, B., Bravo-Haro, M. A. ORCID: 0000-0003-0757-777X & Elghazouli, A. Y. (2022). Assessment of cyclic degradation effects in composite steel-concrete members. Journal of Constructional Steel Research, 192, article number 107231. doi: 10.1016/j.jcsr.2022.107231
Sakda, N., Chitaree, R. & Rahman, B. M. A. ORCID: 0000-0001-6384-0961 (2022). Reflective Terahertz Metasurfaces Based on Non-Volatile Phase Change Material for Switchable Manipulation. Photonics, 9(8), article number 508. doi: 10.3390/photonics9080508
Sakda, N., Ghosh, S., Chitaree, R. & Rahman, B. M. A. ORCID: 0000-0001-6384-0961 (2022). Performance optimization of a metasurface incorporating non-volatile phase change material. Optics Express, 30(8), pp. 12982-12944. doi: 10.1364/oe.453612
Salah, S., White, M. ORCID: 0000-0002-7744-1993 & Sayma, A. I. ORCID: 0000-0003-2315-0004 (2022). A comparison of axial turbine loss models for air, sCO₂ and ORC turbines across a range of scales. International Journal of Thermofluids, 15, article number 100156. doi: 10.1016/j.ijft.2022.100156
Selim, O. & Bruecker, C. ORCID: 0000-0001-5834-3020 (2022). Detecting separation pre-cursors using on-board optical tracking of flexible pillar sensors. Paper presented at the 20th International Symposium on Application of Laser and Imaging Techniques to Fluid Mechanics, 11-14 Jul 2022, Lisbon, Portugal.
Shamass, R., Ferreira, F. P. V., Limbachiya, V. , Santos, L. F. P. & Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 (2022). Web-Post Buckling Prediction Resistance of Steel Beams with Elliptically-Based Web Openings using Artificial Neural Networks (ANN). Thin Walled Structures, 180, article number 109959. doi: 10.1016/j.tws.2022.109959
Sheikh, M., Qassem, M. & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2022). Optical Detection of Lithium Therapeutic Levels in Porcine Interstitial Fluid Collected Using a Hollow Microneedle. In: 2022 44th Annual International Conference of the IEEE Engineering in Medicine & Biology Society (EMBC). 44th Annual International Conference of the IEEE Engineering in Medicine & Biology Society (EMBC), 11-15 Jul 2022, Glasgow, Scotland, United Kingdom. doi: 10.1109/EMBC48229.2022.9871289
Sheikh, M., Qassem, M., Triantis, I. F. & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2022). Advances in Therapeutic Monitoring of Lithium in the Management of Bipolar Disorder. Sensors, 22(3), article number 736. doi: 10.3390/s22030736
Sivaselvan, N., Bhattacharyya, K., Rajarajan, M. ORCID: 0000-0001-5814-9922 , Das, A. & Rodrigues, J. (2022). SUACC-IoT: secure unified authentication and access control system based on capability for IoT. Cluster Computing, 26(4), pp. 2409-2428. doi: 10.1007/s10586-022-03733-w
Siwal, S. S., Sheoran, K., Mishra, K. , Kaur, H., Saini, A. K., Saini, V., Vo, D-V. N., Yazdani Nezhad, H. ORCID: 0000-0003-0832-3579 & Thakur, V. K. (2022). Novel synthesis methods and applications of MXene-based nanomaterials (MBNs) for hazardous pollutants degradation: Future perspectives. Chemosphere, 293, article number 133542. doi: 10.1016/j.chemosphere.2022.133542
Smith-Creasey, M., Furnell, S. & Rajarajan, M. ORCID: 0000-0001-5814-9922 (2022). Continuous authentication for IoT smart home environments. Network Security, 2022(4), doi: 10.12968/s1353-4858(22)70031-1
Sohawon, M. (2022). The performance of constitutive models in predicting ground movements associated with excavations in clay. (Unpublished Doctoral thesis, City, University of London)
Soleymani, T. ORCID: 0000-0003-1359-8892, Baras, J. S. ORCID: 0000-0002-4955-8561 & Hirche, S. ORCID: 0000-0001-7819-5926 (2022). Value of Information in Feedback Control: Quantification. IEEE Transactions on Automatic Control, 67(7), pp. 3730-3737. doi: 10.1109/tac.2021.3113472
Soleymani, T. ORCID: 0000-0003-1359-8892, Baras, J. S. ORCID: 0000-0002-4955-8561, Hirche, S. ORCID: 0000-0001-7819-5926 & Johansson, K. H. ORCID: 0000-0001-9940-5929 (2022). Feedback Control Over Noisy Channels: Characterization of a General Equilibrium. IEEE Transactions on Automatic Control, 67(7), pp. 3396-3409. doi: 10.1109/tac.2021.3110007
Song, G., Zhu, S., Zhang, W. , Hu, B., Zhu, F., Zhang, H., Sun, T. ORCID: 0000-0003-3861-8933 & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2022). Automatic rock classification of LIBS 1 combined with 1DCNN based on improved 2 Bayesian optimization. Applied Optics, 61(35), pp. 10603-10614. doi: 10.1364/AO.472220
Song, W., Wang, H., Power, U. F. , Rahman, E. ORCID: 0000-0001-7238-1859, Barabas, J., Huang, J., McLaughlin, J., Nugent, C. & Maguire, P. (2022). Classification of Respiratory Syncytial Virus and Sendai Virus Using Portable Near-Infrared Spectroscopy and Chemometrics. IEEE Sensors Journal, 23(9), pp. 9981-9989. doi: 10.1109/jsen.2022.3207222
Song, J. ORCID: 0000-0003-0623-0395, Rondao, D. & Aouf, N. ORCID: 0000-0001-9291-4077 (2022). Deep learning-based spacecraft relative navigation methods: A survey. Acta Astronautica, 191, pp. 22-40. doi: 10.1016/j.actaastro.2021.10.025
Soto-Valle, R., Gualtieri, M., Bartholomay, S. , Manolesos, M. ORCID: 0000-0002-5506-6061, Nayeri, C. N., Bianchini, A. & Paschereit, C. O. (2022). Rotational and blockage effects on a wind turbine model based on local blade forces. In: Journal of Physics: Conference Series. The Science of Making Torque from Wind (TORQUE 2022), 1-3 Jun 2022, Delft, the Netherlands. doi: 10.1088/1742-6596/2265/2/022102
Stefanidou, S.P., Paraskevopoulos, E. A., Papanikolaou, V. K. & Kappos, A. J. ORCID: 0000-0002-5566-5021 (2022). An online platform for bridge-specific fragility analysis of as-built and retrofitted bridges. Bulletin of Earthquake Engineering, 20(3), pp. 1717-1737. doi: 10.1007/s10518-021-01299-3
Su, Q., Cai, G., Hani, M. , Si Larbi, A. & Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 (2022). Damage control of the masonry infills in RC frames under cyclic loads: a full-scale test study and numerical analyses. Bulletin of Earthquake Engineering, 21(2), pp. 1017-1045. doi: 10.1007/s10518-022-01565-y
Sui, M., Dong, H., Mu, G. , Xia, J., Zhao, J., Yang, Z., Li, T., Sun, T. & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2022). Droplet transportation by adjusting the temporal phase shift of surface acoustic waves in the exciter-exciter mode. Lab on a Chip, 22(18), pp. 3402-3411. doi: 10.1039/d2lc00402j
Sultan, A., Tahir, S., Tahir, H. , Anwer, T., Khan, F., Rajarajan, M. ORCID: 0000-0001-5814-9922 & Rana, O. F. (2022). A Novel Image-Based Homomorphic Approach for Preserving the Privacy of Autonomous Vehicles Connected to the Cloud. IEEE Transactions on Intelligent Transportation Systems, 24(2), pp. 1-13. doi: 10.1109/tits.2022.3219591
Suntharalingam, T., Upasiri, I., Nagaratnam, B. , Poologanathan, K., Gatheeshgar, P., Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 & Nuwanthika, D. (2022). Finite Element Modelling to Predict the Fire Performance of Bio-Inspired 3D-Printed Concrete Wall Panels Exposed to Realistic Fire. Buildings, 12(2), article number 111. doi: 10.3390/buildings12020111
Syamil Mohd Sa’ad, M., Faizal Ismail, M., Khairol Annuar Zaini, M. , Grattan, K. T. V. ORCID: 0000-0003-2250-3832, Rahman, B. M. ORCID: 0000-0001-6384-0961, Brambilla, G., Sing, L. K. & Ahmad, H. (2022). Temperature-independent Vibration Sensor Based on Fabry-Perot Interferometer using a Fiber Bragg Grating approach. Optical Engineering, 61(03), article number 037101. doi: 10.1117/1.oe.61.3.037101
Tabar, A. M., Alonso-Rodriguez, A. & Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 (2022). Building Retrofit with Reduced Web (RWS) and Beam (RBS) Section Limited-Ductility Connections. Journal of Constructional Steel Research, 197, article number 107459. doi: 10.1016/j.jcsr.2022.107459
Tahani, M., Masdari, M. ORCID: 0000-0002-1159-2406, Habibi, A. & Mirhosseini, M. (2022). Enhancement effect of multi-stage inducing duct on the wind velocity profile. Scientia Iranica, 29(6), pp. 3017-3031.
Tahir, S., Tahir, H., Tahir, R. , Rajarajan, M. ORCID: 0000-0001-5814-9922 & Abbas, H. (2022). Water Is a Viable Data Storage Medium: A Security and Privacy Viewpoint. Electronics, 11(5), article number 818. doi: 10.3390/electronics11050818
Tala, T., Samad, T., Al-Zaili, J. ORCID: 0000-0003-4072-2107 , Kamuriwo, S., Sayma, A. ORCID: 0000-0003-2315-0004, Manyuchi, K., Kinoti, M. & Tsamenyi, M. (2022). A Study on the Market Potential of Biomass-Based Micro Gas Turbines in Sub-Saharan Africa. In: Energy Proceedings. 13th International Conference on Applied Energy, 29 Nov - 2 Dec 2021, Thailand/Virtual. doi: 10.46855/energy-proceedings-9290
Tamanna, N., Kabir, I. R. & Naher, S ORCID: 0000-0003-2047-5807 (2022). Thermo-mechanical modelling to evaluate residual stress and material compatibility of laser cladding process depositing similar and dissimilar material on Ti6Al4V alloy. Thermal Science and Engineering Progress, 31, article number 101283. doi: 10.1016/j.tsep.2022.101283
Tan, J. & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2022). Editorial for the Special Issue on High-End Measuring Instruments. Engineering, 16, pp. 1-2. doi: 10.1016/j.eng.2022.07.002
Thermou, G. E. & Kappos, A. J. ORCID: 0000-0002-5566-5021 (2022). Background to the Monolithicity Factors for the Assessment of Jacketed Reinforced Concrete Columns. Buildings, 12(1), article number 55. doi: 10.3390/buildings12010055
Thirunavukkarasu, K., Kanthasamy, E., Poologanathan, K. , Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979, Gatheeshgar, P., Hareindirasarma, S. & McIntosh, A. (2022). Shear performance of SupaCee sections with openings: Numerical studies. Journal of Constructional Steel Research, 190, article number 107142. doi: 10.1016/j.jcsr.2022.107142
Thomaidis, I., Camara Casado, A. ORCID: 0000-0002-1675-2640 & Kappos, A. (2022). Dynamics and seismic performance of asymmetric rocking bridges. Journal of Engineering Mechanics, 148(3), article number 04022003. doi: 10.1061/(asce)em.1943-7889.0002074
Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 & Corfar, D. (2022). Modular building connections: a review. In: CESARE Conference Publications. Coordinating Engineering for Sustainability and Resilience, 6-9 May 2022, Irbid, Jordan.
Tzimas, A., Diban, B., Boyer, L. , Chen, G., Castellon, J., Chitiris, N., Fothergill, J. ORCID: 0000-0002-6960-8618, Hozumi, N., Kim, Y., Lee, J-H., Mauseth, F., Mazzanti, G., Morshuis, P., Troia, I., Tanaka, Y. & Wu, K. (2022). Feasibility of Space Charge Measurements on HVDC Cable Joints. IEEE Electrical Insulation Magazine, 38(5), pp. 18-27. doi: 10.1109/MEI.2022.9858040
Vafaei Shalmani, M. (2022). Seismic fragility assessment of high-rise steel buildings strengthened with moment resisting and bracing frames and under various soil conditions to the ASCE and Eurocodes regulations. (Unpublished Doctoral thesis, City, University of London)
Vendramell Ferreira, F. P., Shamass, R., Limbachiya, V. , Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 & Martins, C. H. (2022). Lateral-torsional buckling resistance prediction model for steel cellular beams generated by Artificial Neural Networks (ANN). Thin-Walled Structures, 170, article number 108592. doi: 10.1016/j.tws.2021.108592
Verma, S., Chugh, S., Ghosh, S. & Rahman, B. M. ORCID: 0000-0001-6384-0961 (2022). Artificial Neural Network Modelling for Optimizing the Optical Parameters of Plasmonic Paired Nanostructures. Nanomaterials (Basel), 12(1), article number 170. doi: 10.3390/nano12010170
Verma, S. & Rahman, B. M. ORCID: 0000-0001-6384-0961 (2022). Advanced refractive index sensor using 3-dimensional metamaterial based nanoantenna array. In: Journal of Physics: Conference Series. Fifth International Conference on Applications of Optics and Photonics (AOP2022), 17-22 Jul 2022, Guimarães, Portugal. doi: 10.1088/1742-6596/2407/1/012054
Villoslada, D., Santos, M. & Tomas-Rodriguez, M. ORCID: 0000-0001-9630-9579 (2022). TMD stroke limiting influence on barge-type floating wind turbines. Ocean Engineering, 248, article number 110781. doi: 10.1016/j.oceaneng.2022.110781
Wahrhaftig, A. D. M., Magalhães, K. M. M., Silva, M. A. , da Fonseca Brasil, R. M. L. R. & Banerjee, J. R. (2022). Buckling and free vibration analysis of non-prismatic columns using optimized shape functions and Rayleigh method. European Journal of Mechanics, A/Solids, 94, article number 104543. doi: 10.1016/j.euromechsol.2022.104543
Wan, K., Manin, J., Sim, H. S. & Karathanassis, I. K. ORCID: 0000-0001-9025-2866 (2022). Soot and PAH formation in high pressure spray pyrolysis of gasoline and diesel fuels. Combustion and Flame, 241, article number 112084. doi: 10.1016/j.combustflame.2022.112084
Wang, J., Ma, Q. ORCID: 0000-0001-5579-6454, Yang, Z. , Gao, J. & Wu, G. (2022). Two types of wave-current interactions and their effects on extreme waves in directional seas. Ocean Engineering, 266(1), article number 112637. doi: 10.1016/j.oceaneng.2022.112637
Wang, L., Fan, L., Fu, F. ORCID: 0000-0002-9176-8159 & Sang, Z. (2022). Cracks width prediction of steel FRP bars reinforced high strength composite concrete beams. Structures, 43, pp. 424-433. doi: 10.1016/j.istruc.2022.06.064
Wang, J., Wang, J., Li, Z. , Yu, Z., Li, S., Liu, T., Sun, T. ORCID: 0000-0003-3861-8933 & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2022). Rapid Response All-Fiber Moisture Sensor. IEEE Sensors Journal, 22(11), pp. 10594-10601. doi: 10.1109/jsen.2022.3172347
Wang, Y., Guo, L., Li, H. & Fu, F. ORCID: 0000-0002-9176-8159 (2022). Axial and hysteretic behavior of T-shaped steel-concrete composite shear walls. Structures, 38, pp. 279-291. doi: 10.1016/j.istruc.2022.01.091
Wang, Z. & Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 (2022). Optimality criteria-based minimum-weight design method for modular building systems subjected to generalised stiffness constraints: A comparative study. Engineering Structures, 251(Part A), article number 113472. doi: 10.1016/j.engstruct.2021.113472
Warsame, C., Valerini, D., Llavori, I. , Barber, A. H. ORCID: 0000-0003-3334-0266 & Goel, S. (2022). Modal analysis of novel coronavirus (SARS COV-2) using finite element methodology. Journal of the Mechanical Behavior of Biomedical Materials, 135, article number 105406. doi: 10.1016/j.jmbbm.2022.105406
Werner, J., Belz, M., Klein, K-F. , Sun, T. ORCID: 0000-0003-3861-8933 & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2022). Design and comprehensive characterization of novel fiber-optic sensor systems using fast-response luminescence-based O2 probes. Measurement, 189, article number 110670. doi: 10.1016/j.measurement.2021.110670
Werner, J., Belz, M., Klein, K-F. , Sun, T. ORCID: 0000-0003-3861-8933 & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2022). Novel design and evaluation of a fast response luminescence-based fiber-optic pH and O2 sensors. Asian Journal of Physics, 31(3-6), pp. 449-464.
White, M. ORCID: 0000-0002-7744-1993 (2022). Investigating the wet-to-dry expansion of organic fluids for power generation. International Journal of Heat and Mass Transfer, 192, article number 122921. doi: 10.1016/j.ijheatmasstransfer.2022.122921
Wu, D., Yang, X., Wang, N. , Lu, L., Chen, J., Zhou, L. & Rahman, B. M. A. ORCID: 0000-0001-6384-0961 (2022). Resonant multilevel optical switching with phase change material GST. Nanophotonics, 11(15), pp. 3437-3446. doi: 10.1515/nanoph-2022-0276
Xi, Y., Peng, X., Xia, H. , Sun, Z. & Zhang, Q. ORCID: 0000-0003-0982-2986 (2022). Entropy Generation of Secondary Flow in a Turning Passage with Different Boundary Layer Characteristics. Aerospace, 9(10), article number 539. doi: 10.3390/aerospace9100539
Xiong, Z., Guan, C., Duan, Z. , Cheng, T., Ye, P., Yang, J., Shi, J., Yang, J., Yuan, L. & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2022). All-optical vector magnetic field sensor based on a side-polished two-core fiber Michelson interferometer. Optics Express, 30(13), pp. 22746-22754. doi: 10.1364/oe.460692
Xu, G., Zhou, Y., Yan, S. ORCID: 0000-0001-8968-6616 & Zhang, N. (2022). Numerical investigation of wave amplitude spectra effects on focusing wave generation. Ocean Engineering, 265, article number 112550. doi: 10.1016/j.oceaneng.2022.112550
Yag, Y. & Fu, F. ORCID: 0000-0002-9176-8159 (2022). Axial compressive behaviour of rectangular DCFSST stub columns. Journal of Constructional Steel Research, 199, article number 107592. doi: 10.1016/j.jcsr.2022.107592
Yang, Y. & Fu, F. ORCID: 0000-0002-9176-8159 (2022). Behaviour of axially compressed CTHST stub columns with inner spiral stirrup. Structures, 45, pp. 372-389. doi: 10.1016/j.istruc.2022.09.038
Yang, D., Guzmán-Iñigo, J. ORCID: 0000-0002-1833-6034 & Morgans, A. S. (2022). Sound generated by axisymmetric non-plane entropy waves passing through flow contractions. International Journal of Aeroacoustics, 21(5-7), pp. 521-536. doi: 10.1177/1475472x221107368
Yang, D., Li, M., Fu, F. ORCID: 0000-0002-9176-8159 & Wu, J. (2022). Experimental and numerical studies on a new type of bolt-ball joint for spatial grid structures. Journal of Constructional Steel Research, 188, article number 107035. doi: 10.1016/j.jcsr.2021.107035
Yang, X. L., Wang, S. J., Xing, Y. L. , Li, Ling ORCID: 0000-0002-4026-0216, Xu, R., Friston, K. J. & Guo, Y. (2022). Bayesian data assimilation for estimating instantaneous reproduction numbers during epidemics: Applications to COVID-19. PLoS Computational Biology, 18(2), article number e1009807. doi: 10.1371/journal.pcbi.1009807
Yang, Y., Zhang, Y. & Fu, F. ORCID: 0000-0002-9176-8159 (2022). Performance and design of RAC-filled steel RHS beams. Journal of Building Engineering, 46, article number 103734. doi: 10.1016/j.jobe.2021.103734
Yeddula, S. R., Guzmán-Iñigo, J. ORCID: 0000-0002-1833-6034 & Morgans, A. S. (2022). A solution for the quasi-one-dimensional linearised Euler equations with heat transfer. Journal of Fluid Mechanics, 936, article number R3. doi: 10.1017/jfm.2022.101
Yu, Z., Zheng, X., Hao, H. , Yan, S. ORCID: 0000-0001-8968-6616 & Ma, Q. ORCID: 0000-0001-5579-6454 (2022). Numerical Simulation of a Floating Offshore Wind Turbine in Waves Using qaleFOAM. International Journal of Offshore and Polar Engineering, 32(1), pp. 39-48. doi: 10.17736/ijope.2022.jc841
Zahoora, U., Khan, A., Rajarajan, M. ORCID: 0000-0001-5814-9922 , Khan, S. H., Asam, M. & Jamal, T. (2022). Ransomware detection using deep learning based unsupervised feature extraction and a cost sensitive Pareto Ensemble classifier. Scientific Reports, 12(1), article number 15647. doi: 10.1038/s41598-022-19443-7
Zahoora, U., Rajarajan, M. ORCID: 0000-0001-5814-9922, Pan, Z. & Khan, A. (2022). Zero-day Ransomware Attack Detection using Deep Contractive Autoencoder and Voting based Ensemble Classifier. Applied Intelligence, 52(12), pp. 13941-13960. doi: 10.1007/s10489-022-03244-6
Zhang, L., Liu, X., Li, K. , Du, D., Zheng, M., Niu, Q., Yang, Y., Zhou, Q., Sun, T. & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2022). Real-time battery temperature monitoring using FBG sensors: a data-driven calibration method. IEEE Sensors Journal, 22(19), pp. 18639-18648. doi: 10.1109/jsen.2022.3200589
Zhang, N., Yan, S. ORCID: 0000-0001-8968-6616, Ma, Q. ORCID: 0000-0001-5579-6454 & Zheng, X. (2022). A Smoothed Particle Hydrodynamics Framework for Interaction Between Ice and Flexible Pile. International Journal of Offshore and Polar Engineering, 32(1), pp. 16-23. doi: 10.17736/ijope.2022.jc849
Zhang, Y., Gao, S., Guo, L. , Fu, F. ORCID: 0000-0002-9176-8159 & Wang, S. (2022). Ultimate tensile behavior of bolted stiffened T-stub connections in progressive collapse resistance. Journal of Constructional Steel Research, 189, article number 107111. doi: 10.1016/j.jcsr.2021.107111
Zhang, Z., Li, Q. ORCID: 0000-0001-7456-7868, Bruecker, C. ORCID: 0000-0001-5834-3020 & Zhang, Q. ORCID: 0000-0003-0982-2986 (2022). Enhanced Thermal Performance with High-Amplitude Intermittent Impingement Cooling. International Journal of Heat and Mass Transfer, 185, article number 122359. doi: 10.1016/j.ijheatmasstransfer.2021.122359
Zhang, Z., Wang, C., Song, J. ORCID: 0000-0003-0623-0395 & Xu, Y. (2022). Object Tracking Based on Satellite Videos: A Literature Review. Remote Sensing, 14(15), article number 3674. doi: 10.3390/rs14153674
Zhao, J., Mu, G., Dong, H. , Sun, T. ORCID: 0000-0003-3861-8933 & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2022). Requirements for a transportation system based on ultrasonic traveling waves using the measurement of spatial phase difference. Mechanical Systems and Signal Processing, 168, article number 108708. doi: 10.1016/j.ymssp.2021.108708
Zhao, J., Mu, G., Dong, H. , Sun, T. ORCID: 0000-0003-3861-8933 & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2022). Study of the Velocity and Direction of Piezoelectric Robot Driven by Traveling Waves. IEEE Transactions on Industrial Electronics, 70(9), pp. 9260-9269. doi: 10.1109/tie.2022.3210545
Zhao, S., Sun, D., Zhang, J. , Lu, H., Wang, Y., Xiong, R. & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2022). Actuation and biomedical development of micro-/nanorobots – A review. Materials Today Nano, 18, article number 100223. doi: 10.1016/j.mtnano.2022.100223
Zhou, H., Suo, L., Peng, Y-P. , Yang, F., Ren, S., Chen, N-K., Lu, X., Rahman, B. M. ORCID: 0000-0001-6384-0961 & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2022). Micro-Tapered Fiber Few-Mode Interferometers Incorporated by Molecule Self-Assembly Fiber Grating for Temperature Sensing Applications. Photonics, 9(2), article number 96. doi: 10.3390/photonics9020096
Zimos, D., Mergos, P. E. ORCID: 0000-0003-3817-9520, Papanikolaou, V. & Kappos, A. ORCID: 0000-0002-5566-5021 (2022). Analysis of Shear-critical Reinforced Concrete Columns under Variable Axial Load. Magazine of Concrete Research, 74(14), pp. 715-726. doi: 10.1680/jmacr.21.00034
2021
Abd Razak, N. A., Ahmad, A. H., Rashidi, M. M. & Naher, S. ORCID: 0000-0003-2047-5807 (2021). An investigation of semisolid Al7075 feedstock billet produced by a gas-assisted direct thermal method. The International Journal of Advanced Manufacturing Technology, 114(3-4), pp. 1233-1240. doi: 10.1007/s00170-021-06924-8
AbdElDayem, A., White, M. ORCID: 0000-0002-7744-1993 & Sayma, A. I. ORCID: 0000-0003-2315-0004 (2021). Comparison of CFD predictions of supercritical carbon dioxide axial flow turbines using a number of turbulence models. In: Proceedings of the ASME Turbo Expo 2021: Turbomachinery Technical Conference and Exposition. ASME Turbo Expo 2021: Turbomachinery Technical Conference and Exposition, 7-11 Jun 2021, Online. doi: 10.1115/GT2021-58883
Agarwal, S., Saincher, S., Sriram, V. , Yan, S. ORCID: 0000-0001-8968-6616, Xie, Z., Schlurmann, T., Ma, Q. ORCID: 0000-0001-5579-6454, Yang, X., Wan, D., Gong, J., Li, Y., Li, Y., Lu, J., Hanbing, S. S., Liu, Y., Zou, B., Chen, S., Le, J., Lin, J., Hong, S., Ha, Y-J., Kim, K-M., Cho, S-K., Park, D-M., Sithik, A., Bouscasse, B., Ducrozet, G. & Ferrant, P. (2021). A Comparative Study on the Nonlinear Interaction Between a Focusing Wave and Cylinder Using State-of-the-art Solvers: Part B. International Journal of Offshore and Polar Engineering, 31(1), pp. 11-18. doi: 10.17736/ijope.2021.jc832
Agarwal, S., Sriram, V., Yan, S. ORCID: 0000-0001-8968-6616 & Murali, K. (2021). Improvements in MLPG formulation for 3D wave interaction with fixed structures. Computers and Fluids, 218(104826), article number 104826. doi: 10.1016/j.compfluid.2020.104826
Al-Helwani, A., Abdul-wahed, M. K. & Alfach, M. T. (2021). Dynamic behavior assessment of public buildings in Syria using non-linear time-history analysis and ambient noise measurements: a case study. Asian Journal of Civil Engineering, 22(4), pp. 637-648. doi: 10.1007/s42107-020-00337-w
Alam, N., Maraveas, C., Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 & Nadjai, A. (2021). Performance of Ultra Shallow Floor Beams (USFB) exposed to standard and natural fires. Journal of Building Engineering, 38, article number 102192. doi: 10.1016/j.jobe.2021.102192
Alharbi, A. S., Halikias, G. ORCID: 0000-0003-1260-1383, Rajarajan, M. & Yamin, M. (2021). A review of effectiveness of Saudi E-government data security management. International Journal of Information Technology, 13(2), pp. 573-579. doi: 10.1007/s41870-021-00611-3
Alharbi, Awad (2021). A Framework for Controlling & Managing Traffic with Modern Technology. (Unpublished Doctoral thesis, City, University of London)
Allen, J. ORCID: 0000-0002-7263-0533, Zheng, D. ORCID: 0000-0001-8077-4548, Kyriacou, P. A. ORCID: 0000-0002-2868-485X & Elgendi, M. ORCID: 0000-0003-1831-0202 (2021). Photoplethysmography (PPG): state-of-the-art methods and applications. Physiological Measurement, 42(10), article number 100301. doi: 10.1088/1361-6579/ac2d82
Alonso-Rodríguez, A. & Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 (2021). Effect of rotational inertia on building response to earthquakes via a closed-form solution. Mechanics Based Design of Structures and Machines, 51(4), pp. 1842-1855. doi: 10.1080/15397734.2021.1880329
Amend, M., Rakocevic, V. ORCID: 0000-0002-3081-0448 & Habermann, J. (2021). Cost optimized multipath scheduling in 5G for Video-on-Demand traffic. In: 2021 IEEE Wireless Communications and Networking Conference (WCNC). 2021 IEEE Conference on Wireless Communications and Networking, 29 Mar - 1 Apr 2021, Nanjing, China. doi: 10.1109/WCNC49053.2021.9417415
Apostolopoulou, D. ORCID: 0000-0002-9012-9910, Poudineh, R. & Sen, A. (2021). Distributed Optimal Power Flow for Unbalanced Radial Systems with Time-varying Communication. In: 2021 IEEE Power & Energy Society General Meeting (PESGM). IEEE Power and Energy Society General Meeting 2021, 25 -29 Jun 2021, Virtual. doi: 10.1109/PESGM46819.2021.9638227
Aqel, O., White, M. ORCID: 0000-0002-7744-1993, Khader, M. A. ORCID: 0000-0002-5771-2258 & Sayma, A. I. ORCID: 0000-0003-2315-0004 (2021). Sensitivity of transcritical cycle and turbine design to dopant fraction in CO2-based working fluids. Applied Thermal Engineering, 190, article number 116796. doi: 10.1016/j.applthermaleng.2021.116796
Aqel, O., White, M. ORCID: 0000-0002-7744-1993 & Sayma, A. I. ORCID: 0000-0003-2315-0004 (2021). Binary interaction uncertainty in the optimisation of a transcritical cycle: Consequences on cycle and turbine design. Paper presented at the 4th European sCO2 Conference for Energy Systems, 23-24 Mar 2021, Online. doi: 10.17185/duepublico/73959
Arafat, M., Dinan, B., Haseeb, A. , Akbar, S., Rahman, B. M., Rozali, S. & Naher, S. (2021). Growth of 1D TiO2nanostructures on Ti substrates incorporated with residual stress through humid oxidation and their characterizations. Nanotechnology, 32(47), article number 475607. doi: 10.1088/1361-6528/ac1d77
Arora, H., Mitchell, R. L., Johnston, R. , Manolesos, M. ORCID: 0000-0002-5506-6061, Howells, D., Sherwood, J. M., Bodey, A. J. & Wanelik, K. (2021). Correlating Local Volumetric Tissue Strains with Global Lung Mechanics Measurements. Materials (Basel), 14(2), article number 439. doi: 10.3390/ma14020439
Asteris, P., Lemonis, M., Le, T. & Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 (2021). Evaluation of the ultimate eccentric load of rectangular CFSTs using advanced neural network modeling. Engineering Structures, 248, article number 113297. doi: 10.1016/j.engstruct.2021.113297
Azizi, M., Talatahari, S. & Giaralis, A. ORCID: 0000-0002-2952-1171 (2021). Active Vibration Control of Seismically Excited Building Structures by Upgraded Grey Wolf Optimizer. IEEE Access, 9, pp. 166658-166673. doi: 10.1109/access.2021.3134202
Azizi, M., Talatahari, S. & Giaralis, A. ORCID: 0000-0002-2952-1171 (2021). Optimization of Engineering Design Problems Using Atomic Orbital Search Algorithm. IEEE Access, 9, pp. 102497-102519. doi: 10.1109/access.2021.3096726
Bahraini, M. S., Zenati, A. & Aouf, N. ORCID: 0000-0001-9291-4077 (2021). Autonomous Cooperative Visual Navigation for Planetary Exploration Robots. In: 2021 IEEE International Conference on Robotics and Automation (ICRA). 2021 IEEE International Conference on Robotics and Automation (ICRA), 30 May - 5 Jun 2021, Xi'an, China. doi: 10.1109/ICRA48506.2021.9561767
Baishya, N., Mamouei, M., Budidha, K. ORCID: 0000-0002-6329-8399 , Qassem, M., Vadgama, P. & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2021). In-vivo quantification of lactate using Near Infrared reflectance spectroscopy. In: 2021 43rd Annual International Conference of the IEEE Engineering in Medicine & Biology Society (EMBC). 43rd Annual International Conference of the IEEE Engineering in Medicine & Biology Society (EMBC), 1-5 Nov 2021, Mexico. doi: 10.1109/EMBC46164.2021.9630235
Baishya, N., Mamouei, M. H., Budidha, K. ORCID: 0000-0002-6329-8399 , Qassem, M. ORCID: 0000-0003-0730-3189, Vadgama, P. & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2021). Comparison of Dual Beam Dispersive and FTNIR Spectroscopy for Lactate Detection. Sensors, 21(5), article number 1891. doi: 10.3390/s21051891
Baker, A. & Yazdani Nezhad, H. ORCID: 0000-0003-0832-3579 (2021). Adhesively bonded repairs to highly loaded structure. In: Adams, Robert (Ed.), Adhesive Bonding. (pp. 437-497). Woodhead Publishing. doi: 10.1016/B978-0-12-819954-1.00022-8
Balamurugan, C., Singh, K., Ganesan, G. & Rajarajan, M. ORCID: 0000-0001-5814-9922 (2021). Post-Quantum and Code-Based Cryptography—Some Prospective Research Directions. Cryptography, 5(4), article number 38. doi: 10.3390/cryptography5040038
Balatti, D., Haddad Khodaparast, H., Friswell, M. I. , Manolesos, M. ORCID: 0000-0002-5506-6061 & Castrichini, A. (2021). Aircraft turbulence and gust identification using simulated in-flight data. Aerospace Science and Technology, 115, article number 106805. doi: 10.1016/j.ast.2021.106805
Banerjee, J. R. (2021). Frequency dependent mass and stiffness matrices of bar and beam elements and their equivalency with the dynamic stiffness matrix. Computers and Structures, 254, article number 106616. doi: 10.1016/j.compstruc.2021.106616
Basha, N., Kovacevic, A. ORCID: 0000-0002-8732-2242 & Rane, S. (2021). Numerical investigation of oil injection in screw compressors. Applied Thermal Engineering, 193, article number 116959. doi: 10.1016/j.applthermaleng.2021.116959
Bekhradinasab, A., Al-Zaili, J. ORCID: 0000-0003-4072-2107 & Vakilipour, S. (2021). Large eddy simulation of separated flow to investigate heat transfer characteristics in an asymmetric diffuser subjected to constant wall heat flux. International Communications in Heat and Mass Transfer, 128, article number 105634. doi: 10.1016/j.icheatmasstransfer.2021.105634
Boiarkin, V., Rajarajan, M. ORCID: 0000-0001-5814-9922 & Asif, W. (2021). Fair Pricing Model for Smart Grids. In: 2021 9th International Conference on Smart Grid and Clean Energy Technologies (ICSGCE). 9th International Conference on Smart Grid and Clean Energy Technologies, 15-17 Oct 2021, Sarawak, Malaysia. doi: 10.1109/ICSGCE52779.2021.9621701
Bravo-Haro, M. A. ORCID: 0000-0003-0757-777X, Virreira, J. R. & Elghazouli, A. Y. (2021). Inelastic displacement ratios for non-structural components in steel framed structures under forward-directivity near-fault strong-ground motion. Bulletin of Earthquake Engineering, 19(5), pp. 2185-2211. doi: 10.1007/s10518-021-01059-3
Bremner, J. ORCID: 0000-0001-9602-2893, Kissinger, T., Hodgkinson, J. & Tatam, R. P. (2021). Fibre-coupled, multiplexed methane detection using range-resolved interferometry. Journal of Physics: Photonics, 3(2), article number 02LT01. doi: 10.1088/2515-7647/abe0fd
Brooks, S. J. ORCID: 0000-0002-5712-7358 & Roy, R. ORCID: 0000-0001-5491-7437 (2021). Complexity of self-engineering systems across the life cycle-Biological and engineering systems. Procedia CIRP, 98, pp. 121-126. doi: 10.1016/j.procir.2021.01.016
Brooks, S. J. ORCID: 0000-0002-5712-7358 & Roy, R. ORCID: 0000-0001-5491-7437 (2021). An overview of self-engineering systems. Journal of Engineering Design, 32(8), pp. 397-447. doi: 10.1080/09544828.2021.1914323
Brooks, S. J. ORCID: 0000-0002-5712-7358, Yasin, A., Alatishe, K. & Roy, R. ORCID: 0000-0001-5491-7437 (2021). Design and Implementation of a Self-Cleaning Heat Exchanger Using a Digital Twin. In: Proceedings of the The 10th International Conference on Through-Life Engineering Services 2021 (TESConf 2021). 10th International Through-Life Engineering Services Conference (Tesconf2021), 16-18 Nov 2021, Online. doi: 10.2139/ssrn.3944684
Budidha, K. ORCID: 0000-0002-6329-8399, Chatterjee, S., Qassem, M. & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2021). Monte Carlo Characterization of Short-Wave Infrared Optical Wavelengths for Biosensing Applications. In: 2021 43rd Annual International Conference of the IEEE Engineering in Medicine & Biology Society (EMBC). 43rd Annual International Conference of the IEEE Engineering in Medicine & Biology Society (EMBC), 1-5 Nov 2021, Mexico. doi: 10.1109/EMBC46164.2021.9630061
Cai, B., Hu, W. & Fu, F. ORCID: 0000-0002-9176-8159 (2021). Numerical Analysis of Seismic Performances of Post-fire Scoria Aggregate Concrete Beam-column Joints. Fire, 4(4), article number 70. doi: 10.3390/fire4040070
Cai, B., Yu, T. & Fu, F. ORCID: 0000-0002-9176-8159 (2021). Residual stress-strain relationship of Scoria aggregate concrete with the addition of PP fiber after fire exposure. Fire journal, 4(4), article number 91. doi: 10.3390/fire4040091
Cai, G., Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979, Si Larbi, A. & Purnell, P. (2021). A simplified design approach for predicting the flexural behavior of TRM-strengthened RC beams under cyclic loads. Construction and Building Materials, 285, article number 122799. doi: 10.1016/j.conbuildmat.2021.122799
Camara, A. ORCID: 0000-0002-1675-2640 (2021). Vehicle-bridge interaction and driving accident risks under skew winds. Journal of Wind Engineering and Industrial Aerodynamics, 214, article number 104672. doi: 10.1016/j.jweia.2021.104672
Camara, A. ORCID: 0000-0002-1675-2640 (2021). A fast mode superposition algorithm and its application to the analysis of bridges under moving loads. Advances in Engineering Software, 151, article number 102934. doi: 10.1016/j.advengsoft.2020.102934
Castillo-Rivera, S. & Tomas-Rodriguez, M. ORCID: 0000-0001-9630-9579 (2021). Description of a Dynamical Framework to Analyse the Helicopter Tail Rotor. Dynamics, 1(2), pp. 171-180. doi: 10.3390/dynamics1020010
Chatterjee, S., Budidha, K. ORCID: 0000-0002-6329-8399, Qassem, M. ORCID: 0000-0003-0730-3189 & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2021). In-silico investigation towards the non-invasive optical detection of blood lactate. Scientific Reports, 11(1), article number 14274. doi: 10.1038/s41598-021-92803-x
Chen, S., Liu, Y., Handa, C. O. , Yan, S. ORCID: 0000-0001-8968-6616 & Hong, Z. (2021). Numerical investigation of turbine blades with leading-edge tubercles in uniform current. Water, 13(16), article number 2205. doi: 10.3390/w13162205
Chen, X., Fu, F. ORCID: 0000-0002-9176-8159, Wang, H. , liang, Q., Yu, A., Qian, K. & Chen, P. (2021). A Multi-phase Mesoscopic Simulation Model for the Long-term Chloride ingress and Electrochemical Chloride Extraction. Construction and Building Materials, 270, article number 121826. doi: 10.1016/j.conbuildmat.2020.121826
Chen, X., Zhang, Q., Ming, Y. , Fu, F. ORCID: 0000-0002-9176-8159 & Rong, H. (2021). A Numerical study for Chloride Migration in Concrete Under Electrochemical Repair Process. Proceedings of the Institution of Civil Engineers: Structures and Buildings, 176(7), pp. 556-564. doi: 10.1680/jstbu.21.00049
Corfar, D. A. & Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 (2021). A Novel Optimised Inter-Locking Connection for Steel Modular Building Systems to Enable Re-Use. Paper presented at the XIII Conference of Steel and Composite Construction, 25-26 Nov 2021, Coimbra, Portugal.
De Bianchi, F., Ponnusami, S. A. ORCID: 0000-0002-2143-8971, Silvestroni, L. & Grande, A. M. (2021). Thermo-elastic properties in short fibre reinforced ultra-high temperature ceramic matrix composites: Characterisation and numerical assessment. Materials Today Communications, 29, article number 102754. doi: 10.1016/j.mtcomm.2021.102754
Dissanayake, D. M. M. P., Poologanathan, K., Gunalan, S. , Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 & Degtyareva, N. (2021). Effect of Corner Strength Enhancement on Shear Behaviour of Stainless Steel Lipped Channel Sections. In: Lecture Notes in Civil Engineering. 10th International Conference on Structural Engineering and Construction Management (ICSECM 2019), 12-14 Dec 2019, Kandy, Sri Lanka. doi: 10.1007/978-981-15-7222-7_19
Dissanayake, D. M. M. P., Poologanathan, K., Gunalan, S. , Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 & Wanniarachchi, K. S. (2021). Shear Behaviour of Cold-Formed Stainless Steel Lipped Channels with Reduced Support Restraints. In: Lecture Notes in Civil Engineering. 10th International Conference on Structural Engineering and Construction Management (ICSECM 2019), 12-14 Dec 2019, Kandy, Sri Lanka. doi: 10.1007/978-981-15-7222-7_20
Dissanayake, D. M. M. P., Poologanathan, K., Gunalan, S. , Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979, Wanniarachchi, K. S. & Nagaratnam, B. (2021). Bending-shear interaction of cold-formed stainless steel lipped channel sections. Structures, 30, pp. 1042-1055. doi: 10.1016/j.istruc.2020.12.071
Dissanayake, D. M. M. P., Poologanathan, K., Gunalan, S. , Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979, Wanniarachchi, K. S. & Nagaratnam, B. (2021). Numerical investigation of cold-formed stainless steel lipped channels with longitudinal stiffeners subjected to shear. Thin-Walled Structures, 158, article number 107179. doi: 10.1016/j.tws.2020.107179
Dissanayake, D. M. M. P., Zhou, C., Poologanathan, K. , Gunalan, S., Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 & Guss, J. (2021). Numerical simulation and design of stainless steel hollow flange beams under shear. Journal of Constructional Steel Research, 176, article number 106414. doi: 10.1016/j.jcsr.2020.106414
Dissanayake, M., Suntharalingam, T., Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 , Poologanathan, K. & Perampalam, G. (2021). Informed finite element modelling for wire and arc additively manufactured metallics—a case study on modular building connections. Buildings, 12(1), article number 5. doi: 10.3390/buildings12010005
Dixit, A., Singh, A., Rahulamathavan, Y. & Rajarajan, M. ORCID: 0000-0001-5814-9922 (2021). FAST DATA: A Fair, Secure and Trusted Decentralized IIoT Data Marketplace enabled by Blockchain. IEEE Internet of Things Journal, 10(4), pp. 2934-2944. doi: 10.1109/jiot.2021.3120640
Efthymiou, E. & Camara, A. ORCID: 0000-0002-1675-2640 (2021). Inelastic response of cable-stayed bridges subjected to non-uniform motions. Bulletin of Earthquake Engineering, 19(6), pp. 2691-2710. doi: 10.1007/s10518-021-01079-z
El Hajj, C. & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2021). Recurrent Neural Network Models for Blood Pressure Monitoring Using PPG Morphological Features. In: 2021 43rd Annual International Conference of the IEEE Engineering in Medicine & Biology Society (EMBC). 43rd Annual International Conference of the IEEE Engineering in Medicine & Biology Society (EMBC), 1-5 Nov 2021, Mexico. doi: 10.1109/EMBC46164.2021.9630319
Ferreira, F. P. V., Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979, Martins, C. & De Nardin, S. (2021). Buckling and post-buckling analyses of composite cellular beams. Composite Structures, 262, article number 113616. doi: 10.1016/j.compstruct.2021.113616
Ferreira, F. P. V., Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979, Martins, C. & De Nardin, S. (2021). Composite action on web-post buckling shear resistance of composite cellular beams with PCHCS and PCHCSCT. Engineering Structures, 246, article number 113065. doi: 10.1016/j.engstruct.2021.113065
Ferreira, F. P. V., Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979, Martins, C. & De Nardin, S. (2021). Ultimate strength prediction of steel–concrete composite cellular beams with PCHCS. Engineering Structures, 236, article number 112082. doi: 10.1016/j.engstruct.2021.112082
Ferreira, F. P. V., Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979, Martins, C. H. & De Nardin, S. (2021). Steel-concrete-composite beams with precast hollow-core slabs: A sustainable solution. Sustainability, 13(8), article number 4230. doi: 10.3390/su13084230
Freddi, F., Galasso, C., Cremen, G. , Dall’Asta, A., Di Sarno, L., Giaralis, A. ORCID: 0000-0002-2952-1171, Gutiérrez-Urzúa, F., Malaga-Chuquitaype, C., Mitoulis, S. A., Petrone, C., Sextos, A., Sousa, L., Tarbali, K., Tubaldi, E., Wardman, J. & Woo, G. (2021). INNOVATIONS in earthquake risk reduction for resilience: RECENT advances and challenges. International Journal of Disaster Risk Reduction, 60, article number 102267. doi: 10.1016/j.ijdrr.2021.102267
Fu, F. ORCID: 0000-0002-9176-8159 (2021). Editorial. Proceedings of the Institution of Civil Engineers: Structures and Buildings, 174(4), pp. 237-238. doi: 10.1680/jstbu.2021.174.4.237
Ganeshan, B., Miles, K., Afaq, A. , Punwani, S., Rodriguez, M., Wan, S., Walls, D., Hoy, L., Khan, S., Endozo, R., Shortman, R., Hoath, J., Bhargava, A., Hanson, M., Francis, D., Arulampalam, T., Dindyal, S., Chen, S-H., Ng, T. & Groves, A. (2021). Texture Analysis of Fractional Water Content Images Acquired during PET/MRI: Initial Evidence for an Association with Total Lesion Glycolysis, Survival and Gene Mutation Profile in Primary Colorectal Cancer.. Cancers, 13(11), article number 2715. doi: 10.3390/cancers13112715
Gavaises, M. ORCID: 0000-0003-0874-8534, Murali-Girija, M., Rodriguez, C. , Koukouvinis, P. ORCID: 0000-0002-3945-3707, Gold, M. & Pearson, R. (2021). Numerical simulation of fuel dribbling and nozzle wall wetting. International Journal of Engine Research, 23(1), pp. 132-149. doi: 10.1177/1468087420985189
Ghosh, S. ORCID: 0000-0002-1992-2289, Dissanayake, K. P. W., Sun, T. ORCID: 0000-0003-3861-8933 , Grattan, K. T. V. ORCID: 0000-0003-2250-3832 & Rahman, B. M. ORCID: 0000-0001-6384-0961 (2021). Calibration of Fiber Grating Heavy Metal Ion Sensor Using Artificial Neural Network. In: 2021 Conference on Lasers and Electro-Optics (CLEO). CLEO: Applications and Technology 2021, 9-14 May 2021, California, USA. doi: 10.1364/cleo_at.2021.jw1a.25
Giaralis, A. ORCID: 0000-0002-2952-1171 (2021). An inerter-based dynamic vibration absorber with concurrently enhanced energy harvesting and motion control performances under broadband stochastic excitation via inertance amplification. Journal of Risk and Uncertainty in Engineering Systems Part B: Mechanical Engineering, 7(1), article number 010909. doi: 10.1115/1.4049213
Glick, R., Muthuramalingam, M. & Brücker, C. ORCID: 0000-0001-5834-3020 (2021). Fluid-Structure Interaction of Flexible Whisker-Type Beams and Its Implication for Flow Sensing by Pair-Wise Correlation. Fluid Structure Interaction: Methods and Applications, 6(3), article number 102. doi: 10.3390/fluids6030102
Gomez Santos, E., Shi, J., Venkatasubramanian, R. , Hoffmann, G., Gavaises, M. ORCID: 0000-0003-0874-8534 & Bauer, W. (2021). Modelling and prediction of cavitation erosion in GDi injectors operated with E100 fuel. Fuel, 289, article number 119923. doi: 10.1016/j.fuel.2020.119923
Gong, J., Yan, S. ORCID: 0000-0001-8968-6616, Ma, Q. ORCID: 0000-0001-5579-6454 & Li, Y. (2021). Numerical Simulation of Fixed and Moving Cylinders in Focusing Wave by a Hybrid Method. International Journal of Offshore and Polar Engineering, 31(1), pp. 102-111. doi: 10.17736/ijope.2021.jc812
Guzmán-Iñigo, J. ORCID: 0000-0002-1833-6034, Durán, I. & Morgans, A. S. (2021). Scattering of entropy waves into sound by isolated aerofoils. Journal of Fluid Mechanics, 923, article number A10. doi: 10.1017/jfm.2021.569
Hariri, A., Bandopadhyay, S., Rizos, A. , Dimitrakos, T., Crispo, B. & Rajarajan, M. ORCID: 0000-0001-5814-9922 (2021). SIUV: A Smart Car Identity Management and Usage Control System Based on Verifiable Credentials. In: ICT Systems Security and Privacy Protection. 36th IFIP TC 11 International Conference, SEC 2021, 22-24 Jun 2021, Oslo, Norway. doi: 10.1007/978-3-030-78120-0_3
Hassani, V., Mehrabi, H. A., Ibrahim, Z. & Ituarte, I. F. (2021). A Comparison between Parametric Structural Optimization Methods and Software-Based Topology Optimization of A Rectangular Sample Under Tensile Load for Additive Manufacturing Processes. International Journal of Engineering Research and Applications, 11(2), pp. 37-58.
Hawi, S., Gharavian, S., Burda, M. , Goel, S., Lotfian, S., Khaleque, T. & Yazdani Nezhad, H. ORCID: 0000-0003-0832-3579 (2021). Development of carbonaceous tin-based solder composite achieving unprecedented joint performance. Emergent Materials, 4(6), pp. 1679-1696. doi: 10.1007/s42247-021-00337-9
He, W. ORCID: 0000-0002-2633-6114 & Timme, S. (2021). Triglobal infinite-wing shock-buffet study. Journal of Fluid Mechanics, 925, article number A27. doi: 10.1017/jfm.2021.678
Hwang, J., Lee, P., Mun, S. , Karathanassis, I. K. ORCID: 0000-0001-9025-2866, Koukouvinis, P. ORCID: 0000-0002-3945-3707, Pickett, L. & Gavaises, M. ORCID: 0000-0003-0874-8534 (2021). Machine-learning enabled prediction of 3D spray under engine combustion network spray G conditions. Fuel, 293, article number 120444. doi: 10.1016/j.fuel.2021.120444
Iacovidou, E., Purnell, P., Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 & Poologanathan, K. (2021). Digitally enabled modular construction for promoting modular components reuse: A UK view. Journal of Building Engineering, 42, article number 102820. doi: 10.1016/j.jobe.2021.102820
Ismail, N., Sa'ad, M., Ismaila, M. , Zaini, M. K. A., Lim, K. S., Grattan, K. T. V. ORCID: 0000-0003-2250-3832, Brambilla, G., Rahman, B. M. ORCID: 0000-0001-6384-0961, Mohamad, H. & Ahmad, H. (2021). Biaxial 3D-Printed Inclinometer Based on Fiber Bragg Grating Technology. IEEE Sensors Journal, 21(17), pp. 18815-18822. doi: 10.1109/jsen.2021.3090105
Ismail, N., Sharbirin, A. S., Sa’ad, M. , Zaini, M. K. A., Ismail, M. F., Brambilla, G., Rahman, B. M. ORCID: 0000-0001-6384-0961, Grattan, K. T. V. ORCID: 0000-0003-2250-3832 & Ahmad, H. (2021). Novel 3D-printed biaxial tilt sensor based on fiber Bragg grating sensing approach. Sensors and Actuators A: Physical, 330, article number 112864. doi: 10.1016/j.sna.2021.112864
Jia, M., Gao, S., Fu, F. ORCID: 0000-0002-9176-8159 & Yang, N. (2021). Failure Mechanism and Seismic Performance Evaluation of Steel Frame using Rocking Truss. Structures, 33, pp. 1180-1192. doi: 10.1016/j.istruc.2021.05.016
Jiang, W., Hu, J., Mao, S. , Zhang, H., Zhou, L. & Rahman, B. M. ORCID: 0000-0001-6384-0961 (2021). Broadband Silicon Four-Mode (De)Multiplexer Using Subwavelength Grating-Assisted Triple-Waveguide Couplers. Journal of Lightwave Technology, 39(15), pp. 5042-5047. doi: 10.1109/jlt.2021.3079911
Joy, O. & Al-Zaili, J. ORCID: 0000-0003-4072-2107 (2021). On effectiveness of current energy policy instruments to make H2 production projects financially viable for developers: Case of the UK. International Journal of Hydrogen Energy, 46(65), pp. 32735-32749. doi: 10.1016/j.ijhydene.2021.07.147
Kabir, I. R. & Naher, S. ORCID: 0000-0003-2047-5807 (2021). Thermal and thermomechanical modelling of laser melting processing techniques. In: Issa, A. & Brabazon, D. (Eds.), Laser Micro- and Nano-Scale Processing, Fundamentals and applications. (7.1-7.23). Bristol, UK: IOP Publishing. doi: 10.1088/978-0-7503-1683-5ch7
Kanchwala, H., Bezerra Viana, I. & Aouf, N. ORCID: 0000-0001-9291-4077 (2021). Cooperative path-planning and tracking controller evaluation using vehicle models of varying complexities. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 235(16), pp. 2877-2896. doi: 10.1177/0954406220945468
Karathanassis, I. K. ORCID: 0000-0001-9025-2866, Heidari-Koochi, M., Zhang, Q. , Hwang, J., Koukouvinis, P. ORCID: 0000-0002-3945-3707, Wang, J. & Gavaises, M. ORCID: 0000-0003-0874-8534 (2021). X-ray phase contrast and absorption imaging for the quantification of transient cavitation in high-speed nozzle flows. Physics of Fluids, 33(3), article number 032102. doi: 10.1063/5.0038475
Karathanassis, I. K. ORCID: 0000-0001-9025-2866, Hwang, J., Koukouvinis, P. ORCID: 0000-0002-3945-3707 , Pickett, L. & Gavaises, M. ORCID: 0000-0003-0874-8534 (2021). Combined visualisation of cavitation and vortical structures in a real-size optical diesel injector. Experiments in Fluids, 62(1), article number 7. doi: 10.1007/s00348-020-03096-1
Karcanias, N., Vafiadis, D. & Livada, M. ORCID: 0000-0002-0432-872X (2021). Orientation of Implicit State Space Models and the Partitioning of Kronecker Structure. In: IFAC-PapersOnLine. 24th International Symposium on Mathematical Theory of Networks and Systems MTNS 2020, 23-27 Aug 2021, Online. doi: 10.1016/j.ifacol.2021.06.069
Karim, M. R., Al Kayed, N., Kanti Dey, G. & Rahman, B. M. ORCID: 0000-0001-6384-0961 (2021). Design and analysis of suspended core channel waveguide made using As2Se3 glass system for mid-infrared supercontinuum generation. Journal of Optics, 23(1), article number 015504. doi: 10.1088/2040-8986/abcfd3
Karim, M. R., Al Kayed, N. & Rahman, B. M. ORCID: 0000-0001-6384-0961 (2021). Analysis and design of dispersion-engineered cascaded channel waveguide for mid-infrared supercontinuum generation employing pump source at telecommunication wavelength. Optics Communications, 482, article number 126605. doi: 10.1016/j.optcom.2020.126605
Khader, M. A. ORCID: 0000-0002-5771-2258, Ghavami, M. ORCID: 0000-0002-0772-7726, Al-Zaili, J. ORCID: 0000-0003-4072-2107 & Sayma, A. I. ORCID: 0000-0003-2315-0004 (2021). Heat Transfer Effect on Micro Gas Turbine Performance for Solar Power Applications. Energies, 14(20), article number 6745. doi: 10.3390/en14206745
Khaled, A., Hameed, M. F. O., Hussein, M. , Grattan, K. T. V. ORCID: 0000-0003-2250-3832, Rahman, B. M. ORCID: 0000-0001-6384-0961 & Obayya, S. S. A. (2021). Modeling and characteristics of a nanostructured NiO/GeSe core-shell perovskite solar cell. Journal of the Optical Society of America B: Optical Physics, 38(11), pp. 3441-3447. doi: 10.1364/josab.440366
Khaleque, T., Zhang, X., Kumar Thakur, V. , Aria, I. & Yazdani Nezhad, H. ORCID: 0000-0003-0832-3579 (2021). Tailoring of Thermo-Mechanical Properties of Hybrid Composite-Metal Bonded Joints. Polymers, 13(2), article number 170. doi: 10.3390/polym13020170
Kolovos, K., Koukouvinis, P., McDavid, R. M. & Gavaises, M. ORCID: 0000-0003-0874-8534 (2021). Transient cavitation and friction-induced heating effects of diesel fuel during the needle valve early opening stages for discharge pressures up to 450 mpa. Energies, 14(10), article number 2923. doi: 10.3390/en14102923
Koornneef, H., Verhagen, W. J. C. & Curran, R. ORCID: 0009-0008-4349-4449 (2021). A Web-Based Decision Support System for Aircraft Dispatch and Maintenance. Aerospace, 8(6), article number 154. doi: 10.3390/aerospace8060154
Kovacevic, A. ORCID: 0000-0002-8732-2242 & Rane, S. (2021). Challenges in 3D CFD Modelling of Rotary Positive Displacement Machines. Journal of Physics: Conference Series, 1909, article number 012063. doi: 10.1088/1742-6596/1909/1/012063
Kovolos, K. (2021). Assessment of transient effects in diesel injectors affected by fouling and cavitation erosion. (Unpublished Doctoral thesis, City, University of London)
Krishnasamy, J., Ponnusami, S. A. ORCID: 0000-0002-2143-8971, Turteltaub, S. & van der Zwaag, S. (2021). Thermal cyclic behavior and lifetime prediction of self-healing thermal barrier coatings. International Journal of Solids and Structures, 222-22, article number 111034. doi: 10.1016/j.ijsolstr.2021.03.021
Kumar, A., Ghobadian, A. & Nouri, J. ORCID: 0000-0001-8610-3737 (2021). Numerical simulation and experimental validation of cavitating flow in a multi-hole diesel fuel injector. International Journal of Engine Research, 23(6), pp. 958-973. doi: 10.1177/1468087421998631
Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2021). Introduction to photoplethysmography. In: Allen, J. & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (Eds.), Photoplethysmography. (pp. 1-16). London, UK: Elsevier. doi: 10.1016/b978-0-12-823374-0.00001-3
Lacagnina, G., Chaitanya, P., Kim, J. H. , Berk, T., Joseph, P., Choi, K. S., Ganapathisubramani, B., Hasheminejad, S. M., Chong, T. P., Stalnov, O., Shahab, M. F., Omidyeganeh, M. ORCID: 0000-0002-4140-2810 & Pinelli, A. ORCID: 0000-0001-5564-9032 (2021). Leading edge serrations for the reduction of aerofoil self-noise at low angle of attack, pre-stall and post-stall conditions. International Journal of Aeroacoustics, 20(1-2), pp. 130-156. doi: 10.1177/1475472x20978379
Lalicata, L. M., Rotisciani, G. M., Desideri, A. & Casini, F. (2021). A numerical model to study the response of piles under lateral loading in unsaturated soils. Geosciences, 12(1), article number 1. doi: 10.3390/geosciences12010001
Lalicata, L. M., Stallebrass, S. E. ORCID: 0000-0002-3747-9524 & McNamara, A. M. ORCID: 0000-0002-3452-0800 (2021). An experimental study into the ultimate capacity of an 'impression' pile in clay. Geotechnique, 73(5), pp. 455-466. doi: 10.1680/jgeot.21.00168
Le, B. T., Nguyen, N. T., Divall, S. ORCID: 0000-0001-9212-5115 , Goodey, R. & Taylor, R. N. ORCID: 0000-0002-8103-0433 (2021). Modified Gap Method for prediction of tunnelling-induced soil settlement in sand - a case study. In: Geotechnical Aspects of Underground Construction in Soft Ground. 10th International Symposium on Geotechnical Aspects of Underground Construction in Soft Ground, 27-29 Jun 2022, Cambridge, UK. doi: 10.1201/9780429321559
Lei, X., Dong, X., Sun, T. ORCID: 0000-0003-3861-8933 & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2021). Ultrasensitive Refractive Index Sensor Based on Mach-Zehnder Interferometer and a 40 mu m Fiber. Journal of Lightwave Technology, 39(17), pp. 5625-5633. doi: 10.1109/jlt.2021.3087037
Leventides, J., Karcanias, N. ORCID: 0000-0002-1889-6314 & Livada, M. ORCID: 0000-0002-0432-872X (2021). Partially Fixed Structure Determinantal Assignment Problems. IEEE Transactions on Automatic Control, 66(6), pp. 2883-2888. doi: 10.1109/tac.2020.3010767
Leventides, J., Kollias, H., Camouzis, E. & Livada, M. ORCID: 0000-0002-0432-872X (2021). Grassmann Inequalities and Extremal Varieties in P (Lambda R-p(n)). Journal of Optimization Theory and Applications, 189(3), pp. 836-853. doi: 10.1007/s10957-021-01858-3
Li, H., Rane, S. ORCID: 0000-0002-8732-2242 & Yu, Z. (2021). Investigation of the performance and flow characteristics of two-phase reaction turbines in total flow geothermal systems. Renewable Energy, 175, pp. 345-372. doi: 10.1016/j.renene.2021.05.022
Li, Q. ORCID: 0000-0001-7456-7868, Stavropoulos-Vasilakis, E., Koukouvinis, P. , Gavaises, M. ORCID: 0000-0003-0874-8534 & Bruecker, C. ORCID: 0000-0001-5834-3020 (2021). Micro-pillar sensor based wall-shear mapping in pulsating flows: In-Situ calibration and measurements in an aortic heart-valve tester. Journal of Fluids and Structures, 105, article number 103346. doi: 10.1016/j.jfluidstructs.2021.103346
Li, Y., Lu, J., Yan, S. ORCID: 0000-0001-8968-6616 , Ma, Q. ORCID: 0000-0001-5579-6454, Asnim, W., Sun, H. & Sulaiman, Z. (2021). Numerical Simulation of Interaction Between Focusing Waves and Cylinder Using qaleFOAM. International Journal of Offshore and Polar Engineering, 31(1), pp. 36-44. doi: 10.17736/ijope.2021.jc811
Li, Z., Wang, J., Zhong, X. , Liu, T., Ning, Y., Hou, M., Zhao, L., Dong, G., Liu, Y., Wang, J., Sun, T. ORCID: 0000-0003-3861-8933 & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2021). Temperature-compensated fiber-optic gas flow speed sensor based on the 'Hot-wire' principle. Optik, 241, article number 166118. doi: 10.1016/j.ijleo.2020.166118
Limantseva, O. (2021). Approximate controllability and observability measures in control systems design. (Unpublished Doctoral thesis, City, University of London)
Liu, D., Fu, F. ORCID: 0000-0002-9176-8159 & Liu, W. (2021). Structural Behavior of Composite Floor System Using Cold-Formed Thin-Walled C Steel Channel Embedded Foam Concrete. Applied Sciences, 11(21), article number 9888. doi: 10.3390/app11219888
Liu, F., Feng, R. & Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 (2021). Form finding of assembled lattice structure considering the effect of joint stiffness. Structures, 31, pp. 1096-1105. doi: 10.1016/j.istruc.2021.02.026
Liu, F., Feng, R. & Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 (2021). A novel progressive grid generation method for free-form grid structure design and case studies. Journal of Building Engineering, 34, article number 101866. doi: 10.1016/j.jobe.2020.101866
Liu, H., Du, W., Yazdani Nezhad, H. ORCID: 0000-0003-0832-3579 , Starr, A. & Zhao, Y. (2021). A Dissection and Enhancement Technique for Combined Damage Characterisation in Composite Laminates using Laser-line Scanning Thermography. Composite Structures, 271, article number 114168. doi: 10.1016/j.compstruct.2021.114168
Liu, X., Li, Y., Lin, Y. & Banerjee, R. (2021). Spectral dynamic stiffness theory for free vibration analysis of plate structures stiffened by beams with arbitrary cross-sections. Thin-Walled Structures, 160, article number 107391. doi: 10.1016/j.tws.2020.107391
Liu, Z., Tong, L., Chen, L. , Zhou, F., Jiang, Z., Zhang, Q., Wang, Y., Shan, C., Li, L. ORCID: 0000-0002-4026-0216 & Zhou, H. (2021). CANet: Context Aware Network for Brain Glioma Segmentation. IEEE Transactions on Medical Imaging, 40(7), pp. 1763-1777. doi: 10.1109/tmi.2021.3065918
Lu, Y., Kovacevic, A., Read, M. G. ORCID: 0000-0002-7753-2457 , Buckney, D. & Endo, Y. (2021). Investigation of Screw Compressors for Low Pressure Ratio Applications. In: IOP Conference Series: Materials Science and Engineering. 12th International Conference on Compressors and their Systems (Compressors 2021), 6-8 Sep 2021, London, United Kingdom. doi: 10.1088/1757-899x/1180/1/012006
Lyras, T. ORCID: 0000-0002-9783-4786, Karathanasis, I. ORCID: 0000-0001-9025-2866, Kyriazis, N. , Koukouvinis, F. ORCID: 0000-0002-3945-3707 & Gavaises, M. (2021). Modelling of liquid oxygen nozzle flows under subcritical and supercritical pressure conditions. International Journal of Heat and Mass Transfer, 177, article number 121559. doi: 10.1016/j.ijheatmasstransfer.2021.121559
Mahmoud, M., Ramadan, M., Naher, S. ORCID: 0000-0003-2047-5807 , Pullen, K. & Olabi, A-G. (2021). CO2 – based transcritical Rankine cycle coupled with a ground-cooled condenser. Thermal Science and Engineering Progress, 25, article number 100948. doi: 10.1016/j.tsep.2021.100948
Mahmoud, M., Ramadan, M., Naher, S. , Pullen, K. R., Ali Abdelkareem, M. & Olabi, A-G. (2021). A review of geothermal energy-driven hydrogen production systems. Thermal Science and Engineering Progress, 22, article number 100854. doi: 10.1016/j.tsep.2021.100854
Mahmoud, M., Ramadan, M., Pullen, K. R. , Abdelkareem, M. A., Wilberforce, T., Olabi, A-G. & Naher, S. (2021). A review of grout materials in geothermal energy applications. International Journal of Thermofluids, 10, article number 100070. doi: 10.1016/j.ijft.2021.100070
Mamouei, M., Chatterjee, S., Razban, M. , Qassem, M. & Kyriacou, P. ORCID: 0000-0002-2868-485X (2021). Design and analysis of a continuous and non-invasive multi-wavelength optical sensor for measurement of dermal water content. Basel, Switzerland. doi: 10.20944/preprints202102.0414.v1
Mamouei, M. H., Budidha, K. ORCID: 0000-0002-6329-8399, Baishya, N. , Qassem, M. ORCID: 0000-0003-0730-3189 & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2021). An empirical investigation of deviations from the Beer-Lambert law in optical estimation of lactate. Scientific Reports, 11(1), article number 13734. doi: 10.1038/s41598-021-92850-4
Mamouei, M. H., Chatterjee, S. ORCID: 0000-0002-7735-6123, Razban, M. , Qassem, M. ORCID: 0000-0003-0730-3189 & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2021). Design and Analysis of a Continuous and Non-Invasive Multi-Wavelength Optical Sensor for Measurement of Dermal Water Content. Sensors, 21(6), pp. 4353-4356. doi: 10.3390/s21062162
Manolesos, M. ORCID: 0000-0002-5506-6061 & Papadakis, G. (2021). Investigation of the three-dimensional flow past a flatback wind turbine airfoil at high angles of attack. Physics of Fluids, 33(8), article number 085106. doi: 10.1063/5.0055822
May, J. M. ORCID: 0000-0002-8659-756X, Mejía-Mejía, E. ORCID: 0000-0002-5357-4329, Nomoni, M. , Budidha, K. ORCID: 0000-0002-6329-8399, Choi, C. & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2021). Effects of Contact Pressure in Reflectance Photoplethysmography in an In Vitro Tissue-Vessel Phantom. Sensors, 21(24), article number 8421. doi: 10.3390/s21248421
Medina, E. M. & Fu, F. ORCID: 0000-0002-9176-8159 (2021). A New Circular Economy Framework for construction projects. Proceedings of the Institution of Civil Engineers: Engineering Sustainability, 174(6), pp. 304-315. doi: 10.1680/jensu.20.00067
Mejía-Mejía, E. ORCID: 0000-0002-5357-4329, May, J.M. ORCID: 0000-0002-8659-756X, Elgendi, Mohamed & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2021). Differential effects of the blood pressure state on pulse rate variability and heart rate variability in critically ill patients.. npj Digital Medicine, 4(1), article number 82. doi: 10.1038/s41746-021-00447-y
Mejía-Mejía, E. ORCID: 0000-0002-5357-4329, May, J.M. ORCID: 0000-0002-8659-756X & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2021). Effect of Filtering of Photoplethysmography Signals in Pulse Rate Variability Analysis*. In: 2021 43rd Annual International Conference of the IEEE Engineering in Medicine & Biology Society (EMBC). 43rd Annual International Conference of the IEEE Engineering in Medicine & Biology Society (EMBC), 1-5 Nov 2021, Mexico. doi: 10.1109/EMBC46164.2021.9629521
Mello, F., Apostolopoulou, D. ORCID: 0000-0002-9012-9910 & Alonso, E. ORCID: 0000-0002-3306-695X (2021). Cost Efficient Distributed Load Frequency Control in Power Systems. In: IFAC-PapersOnLine. 21st IFAC World Congress, 12-17 Jul 2020, Berlin, Germany. doi: 10.1016/j.ifacol.2020.12.2236
Mergos, P.E. ORCID: 0000-0003-3817-9520 (2021). Optimum design of 3D reinforced concrete building frames with the flower pollination algorithm. Journal of Building Engineering, 44, article number 102935. doi: 10.1016/j.jobe.2021.102935
Mergos, P.E. ORCID: 0000-0003-3817-9520 & Yang, X-S. (2021). Flower Pollination Algorithm Parameters Tuning. Soft Computing, 25(22), pp. 14429-14447. doi: 10.1007/s00500-021-06230-1
Mikes, I. G. & Kappos, A. J. ORCID: 0000-0002-5566-5021 (2021). Simple and complex modelling of seat-type abutment-backfill systems. In: Proceedings of the International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering. 8th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, 28 - 30 Jun 2021, Streamed from Athens, Greece.
Mintz, B., Kang, S. & Qaban, A. ORCID: 0000-0003-2982-8429 (2021). The influence of grain size and precipitation and a boron addition on the hot ductility of a high Al, V containing TWIP steels. Materials Science and Technology, 37(12), pp. 1035-1046. doi: 10.1080/02670836.2021.1975876
Mintz, B. & Qaban, A. ORCID: 0000-0003-2982-8429 (2021). Understanding the high temperature side of the hot ductility curve for steels. Materials Science and Technology, 37(3), pp. 237-249. doi: 10.1080/02670836.2021.1882047
Mishra, R., Goel, S. & Yazdani Nezhad, H. ORCID: 0000-0003-0832-3579 (2021). Computational prediction of electrical and thermal properties of graphene and BaTiO3 reinforced epoxy nanocomposites. Biomaterials and polymers horizon, 1(1), pp. 1-14.
Misra, S., Mukherjee, A., Roy, A. , Saurabh, N., Rahulamathavan, Y. & Rajarajan, M. (2021). Blockchain at the Edge: Performance of Resource-Constrained IoT Networks. IEEE TRANSACTIONS ON PARALLEL AND DISTRIBUTED SYSTEMS, 32(1), pp. 174-183. doi: 10.1109/tpds.2020.3013892
Mu, G., Zhao, J., Dong, H. , Wu, J., Grattan, K. T. V. ORCID: 0000-0003-2250-3832 & Sun, T. ORCID: 0000-0003-3861-8933 (2021). Structural parameter study of dual transducers-type ultrasonic levitation-based transportation system. Smart Materials and Structures, 30(4), article number 045009. doi: 10.1088/1361-665x/abe4e4
Najibi, F. ORCID: 0000-0002-2866-623X, Apostolopoulou, D. ORCID: 0000-0002-9012-9910 & Alonso, E. ORCID: 0000-0002-3306-695X (2021). Clustering Sensitivity Analysis for Gaussian Process Regression Based Solar Output Forecast. In: 2021 IEEE Madrid PowerTech. IEEE PowerTech Conference, 28 Jun - 2 Jul 2021, Madrid, Spain. doi: 10.1109/PowerTech46648.2021.9495007
Najibi, F. ORCID: 0000-0002-2866-623X, Apostolopoulou, D. ORCID: 0000-0002-9012-9910 & Alonso, E. ORCID: 0000-0002-3306-695X (2021). Enhanced Performance Gaussian Process Regression for Probabilistic Short-term Solar Output Forecast. International Journal of Electrical Power and Energy Systems, 130(106916), article number 106916. doi: 10.1016/j.ijepes.2021.106916
Najibi, F. ORCID: 0000-0002-2866-623X, Apostolopoulou, D. ORCID: 0000-0002-9012-9910 & Alonso, E. ORCID: 0000-0002-3306-695X (2021). Gaussian Process Regression for Probabilistic Short-term Solar Output Forecast. International Journal of Electrical Power and Energy Systems, 130, article number 106916. doi: 10.1016/j.ijepes.2021.106916
Naqvi, S. & Fu, F. ORCID: 0000-0002-9176-8159 (2021). Collapse Mechanism of a Space Structure Under Fire Conditions. ce/papers, 4(2-4), pp. 1367-1370. doi: 10.1002/cepa.1433
Nasir, A., Qureshi, H. K., Ullah, I. & Rajarajan, M. ORCID: 0000-0001-5814-9922 (2021). EHA-BeeSensor: Hybrid Protocol for Energy Proficient Routing in IoT Network using Swarm Intelligence. In: 2021 IEEE 26th International Workshop on Computer Aided Modeling and Design of Communication Links and Networks (CAMAD). 26th International Workshop on Computer Aided Modeling and Design of Communication Links and Networks (CAMAD), 25-27 Oct 2021, Porto, Portugal. doi: 10.1109/CAMAD52502.2021.9617777
Nazeer, Y. H., Ehmann, M, Sami, M & Gavaises, E. ORCID: 0000-0003-0874-8534 (2021). Atomization Mechanism of Internally Mixing Twin-Fluid Y-Jet Atomizer. Journal of Energy Engineering, 147(1), article number 04020075. doi: 10.1061/(asce)ey.1943-7897.0000723
Nguyen-Huu, N., Pistora, J., Cada, M. , Nguyen-Thoi, T., Ma, Y., Yasumoto, K., Rahman, B. M. ORCID: 0000-0001-6384-0961, Wu, Q., Ma, Y., Ngo, Q. H., Jie, L. & Maeda, H. (2021). Ultra-wide Spectral Bandwidth and Enhanced Absorption in a Metallic Compound Grating Covered by Graphene Monolayer. IEEE Journal of Selected Topics in Quantum Electronics, 27(1), pp. 1-8. doi: 10.1109/jstqe.2020.2984559
Nykteri, G. (2021). Development of a multiscale two-fluid approach with application to droplet dynamics. (Unpublished Doctoral thesis, City, University of London)
Nykteri, G. ORCID: 0000-0002-8144-6420 & Gavaises, M. ORCID: 0000-0003-0874-8534 (2021). Droplet aerobreakup under the shear-induced entrainment regime using a multiscale two-fluid approach. Physical Review Fluids, 6(8), article number 084304. doi: 10.1103/physrevfluids.6.084304
Papkov, S. O. & Banerjee, J. R. (2021). Free vibration of thick rectangular orthotropic plates with clamped edges- using asymptotic analysis of infinite systems. Journal of Sound and Vibration, 508, article number 116209. doi: 10.1016/j.jsv.2021.116209
Patel, B., Kovacevic, A. ORCID: 0000-0002-8732-2242, Charogiannis, A. , Alam, M. N. & Schuette, M. (2021). The use of laser-induced fluorescence to measure temperature in the leakage gaps of oil-free positive displacement rotary machines. Measurement, 185, article number 110057. doi: 10.1016/j.measurement.2021.110057
Patel, B., Kovacevic, A. ORCID: 0000-0002-8732-2242 & Krupa, A. (2021). On Measuring Velocity and Temperature in Leakage Flows of Oil Free Rotary Positive Displacement Machines. In: Lecture Notes in Networks and Systems. International Conference “New Technologies, Development and Applications”, 24-26 Jun 2021, Sarajevo, Bosnia and Herzegovina. doi: 10.1007/978-3-030-75275-0_84
Pathak, A., Viphavakit, C., Rahman, B. M. ORCID: 0000-0001-6384-0961 & Singh, V. (2021). A Highly Sensitive SPR Refractive Index Sensor Based on Microfluidic Channel Assisted with Graphene-Ag Composite Nanowire. IEEE Photonics Journal, 13(2), pp. 1-8. doi: 10.1109/jphot.2021.3069396
Patsialis, D., Taflanidis, A. & Giaralis, A. ORCID: 0000-0002-2952-1171 (2021). Tuned-mass-damper-inerter optimal design and performance assessment for multi-storey hysteretic buildings under seismic excitation. Bulletin of Earthquake Engineering, 21(3), pp. 1541-1576. doi: 10.1007/s10518-021-01236-4
Pietrosanti, D., De Angelis, M. & Giaralis, A. ORCID: 0000-0002-2952-1171 (2021). Experimental seismic performance assessment and numerical modelling of nonlinear inerter vibration absorber (IVA)-equipped base isolated structures tested on shaking table. Earthquake Engineering and Structural Dynamics, 50(10), pp. 2732-2753. doi: 10.1002/eqe.3469
Pilt, K., May, J.M. ORCID: 0000-0002-8659-756X & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2021). In-Vitro Investigation of Flow Profiles in Arteries Using the Photoplethysmograph. In: 2021 43rd Annual International Conference of the IEEE Engineering in Medicine & Biology Society (EMBC). 43rd Annual International Conference of the IEEE Engineering in Medicine & Biology Society (EMBC), 1-5 Nov 2021, Mexico. doi: 10.1109/EMBC46164.2021.9629713
Qian, K., Cheng, J., Weng, Y. & Fu, F. ORCID: 0000-0002-9176-8159 (2021). Effect of Loading Methods on Progressive Collapse Behavior of RC Beam-Slab Substructures under Corner Column Removal Scenario. Journal of Building Engineering, 44, article number 103258. doi: 10.1016/j.jobe.2021.103258
Qian, K., Lan, D., Li, S. & Fu, F. ORCID: 0000-0002-9176-8159 (2021). Effects of Infill Walls on Load Resistance of Multi-Story RC Frames to Mitigate Progressive Collapse. Structures, 33, pp. 2534-2545. doi: 10.1016/j.istruc.2021.06.015
Qian, K., Lan, X., Li, Z. & Fu, F. ORCID: 0000-0002-9176-8159 (2021). Behavior of Steel Moment Frames using Top-and-Seat Angle Connections under Various Column Removal Scenarios. Journal of Structural Engineering, 147(10), article number 04021144. doi: 10.1061/(asce)st.1943-541x.0003089
Qian, K., Lan, X., Li, Z. & Fu, F. ORCID: 0000-0002-9176-8159 (2021). Effects of Steel Braces on Robustness of Steel Frames against Progressive Collapse. Journal of Structural Engineering, 147(11), article number 04021180. doi: 10.1061/(asce)st.1943-541x.0003161
Qian, K., Liang, S., Fu, F. ORCID: 0000-0002-9176-8159 & Li, Y. (2021). Progressive Collapse Resistance of Emulative Precast Concrete Frames with Various Reinforcing Details. Journal of Structural Engineering, 147(8), article number 04021107. doi: 10.1061/(asce)st.1943-541x.0003065
Rahulamathavan, Y., Dogan, S., Shi, X. , Lu, R., Rajarajan, M. ORCID: 0000-0001-5814-9922 & Kondoz, A. (2021). Scalar Product Lattice Computation for Efficient Privacy-Preserving Systems. IEEE Internet of Things Journal, 8(3), pp. 1417-1427. doi: 10.1109/jiot.2020.3014686
Rajana, K., Alonso-Rodríguez, A. & Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 (2021). A wavelet-based approach for describing the mechanical behaviour of cellular beams. Steel Construction, 14(1), pp. 47-54. doi: 10.1002/stco.202000043
Rane, S. & Kovacevic, A. ORCID: 0000-0002-8732-2242 (2021). 3D CFD modelling of twin screw expanders using real gas equation of state and refprop. In: 10th IIR conference on compressors and refrigerants. 10th IIR Conference on Compressors and Refrigerants, 13-15 Jan 2021, Bratislava, Slovakia. doi: 10.18462/iir.compr.2021.0434
Rane, S., Kovacevic, A. ORCID: 0000-0002-8732-2242, Stosic, N. ORCID: 0000-0001-8034-4046 & Smith, I. (2021). Analysis of real gas equation of state for CFD modelling of twin screw expanders with R245fa, R290, R1336mzz(Z) and R1233zd(E). International Journal of Refrigeration, 121, pp. 313-326. doi: 10.1016/j.ijrefrig.2020.10.022
Rao, K. R., Nayak, A., Ray, I. G. , Rahulamathavan, Y. & Rajarajan, M. ORCID: 0000-0001-5814-9922 (2021). Role recommender-RBAC: Optimizing user-role assignments in RBAC. Computer Communications, 166, pp. 140-153. doi: 10.1016/j.comcom.2020.12.006
Read, M. G. ORCID: 0000-0002-7753-2457 (2021). Basic design procedure for an internally geared screw compressor. In: IOP Conference Series: Materials Science and Engineering. 12th International Conference on Compressors and their Systems (Compressors 2021), 6-8 Sep 2021, London, United Kingdom. doi: 10.1088/1757-899x/1180/1/012055
Rente, B., Fabian, M., Vidakovic, M. , Liu, X., Li, X., Li, K., Sun, T. ORCID: 0000-0003-3861-8933 & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2021). Lithium-Ion Battery State-of-Charge Estimator Based on FBG-Based Strain Sensor and Employing Machine Learning. IEEE Sensors Journal, 21(2), pp. 1453-1460. doi: 10.1109/jsen.2020.3016080
Rente, B., Fabian, M., Vidakovic, M. , Sunarho, J., Bustamante, H., Sun, T. ORCID: 0000-0003-3861-8933 & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2021). A Fiber Bragg Grating (FBG)-Based Sensor System for Anaerobic Biodigester Humidity Monitoring. IEEE Sensors Journal, 21(2), pp. 1540-1547. doi: 10.1109/jsen.2020.3017108
Rente, B., Fabian, M., Vidakovic, M. , Vorreiter, L., Bustamante, H., Sun, T. ORCID: 0000-0003-3861-8933 & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2021). Extended study of fiber optic-based humidity sensing system performance for sewer network condition monitoring. IEEE Sensors Journal, 21(6), pp. 7665-7671. doi: 10.1109/jsen.2021.3050341
Rivero, A. E., Fournier, S., Manolesos, M. ORCID: 0000-0002-5506-6061 , Cooper, J. E. & Woods, B. K. S. (2021). Experimental aerodynamic comparison of active camber morphing and trailing-edge flaps. AIAA Journal, 59(7), pp. 2627-2640. doi: 10.2514/1.j059606
Roldan, M., Chatterjee, S. & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2021). Brain Light-Tissue Interaction Modelling: Towards a non-invasive sensor for Traumatic Brain Injury. In: 2021 43rd Annual International Conference of the IEEE Engineering in Medicine & Biology Society (EMBC). 43rd Annual International Conference of the IEEE Engineering in Medicine & Biology Society (EMBC), 1-5 Nov 2021, Mexico. doi: 10.1109/EMBC46164.2021.9630909
Roldan, M. & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2021). Near-Infrared Spectroscopy (NIRS) in Traumatic Brain Injury (TBI). Sensors, 21(5), article number 1586. doi: 10.3390/s21051586
Rondao, D. ORCID: 0000-0001-9438-0267, Aouf, N. ORCID: 0000-0001-9291-4077, Richardson, M. A. & Dubanchet, V. (2021). Robust On-Manifold Optimization for Uncooperative Space Relative Navigation with a Single Camera. Journal Of Guidance Control And Dynamics, 44(6), pp. 1157-1182. doi: 10.2514/1.g004794
Roy, A., Chakraborty, A. L. & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2021). A 1531.52 nm Tunable Diode Laser-Based System for High-Sensitivity Remote Monitoring of Acetylene and Ammonia Leaks in Industrial Plants. In: Singh, K., Gupta, A. K., Khare, S. , Dixit, N. & Pant, K. (Eds.), ICOL-2019. International Conference on Optics & Electro-Optics, 19-22 Oct 2019, Dehradun, India. doi: 10.1007/978-981-15-9259-1_86
Rubio-Noriega, R. E., Prosopio-Galarza, R., Oliveira, L. P. , Rahman, B. M. ORCID: 0000-0001-6384-0961 & Hernandez-Figueroa, H. E. (2021). A particle swarm optimization approach for designing III-V/Si vertical couplers. Proceedings of SPIE - The International Society for Optical Engineering, 11692, article number 116920T. doi: 10.1117/12.2577995
Sartorius, B., Van der Heide, J., Yang, M. , Goosmann, E., Hon, J., Haeuser, E., Cork, M., Perkins, S., Jahagirdar, D., Schaeffer, L. E., Serfes, A., LeGrand, K. E., Abbastabar, H., Abebo, Z., Abosetugn, A., Abu-Gharbieh, E., Accrombessi, M. M. K., Adebayo, O. M., Adegbosin, A. E., Adekanmbi, V., Adetokunboh, O. O., Adeyinka, D. A., Ahinkorah, B. O., Ahmadi, K., Ahmed, M., Akalu, Y., Akinyemi, O. O., Akinyemi, R. O., Aklilu, A., Akunna, C. J., Alahdab, F., Al-Aly, Z., Alam, N., Alamneh, A., Alanzi, T. M., Alemu, B., Alhassan, R. K., Ali, T., Alipour, V., Amini, S., Ancuceanu, R., Ansari, F., Anteneh, Z., Anvari, D., Anwer, R., Appiah, S., Arabloo, J., Asemahagn, M., Jafarabadi, M. A., Asmare, W., Atnafu, D. D., Atout, M., Atreya, A., Ausloos, M., Awedew, A., Quintanilla, B., Ayanore, M. A., Aynalem, Y. A., Ayza, M., Azari, S., Azene, Z. N., Babar, Z-U-D., Baig, A. A., Balakrishnan, S., Banach, M., Bärnighausen, T., Basu, S., Bayati, M., Bedi, N., Bekuma, T., Bezabhe, W. M., Bhagavathula, A. S., Bhardwaj, P., Bhattacharyya, K., Bhutta, Z., Bibi, S., Bikbov, B., Birhan, T., Bitew, Z., Bockarie, M., Boloor, A., Brady, O. J., Bragazzi, N. L., Briko, A.N., Briko, N. I., Nagaraja, S., Butt, Z. A., Cardenas, R., Carvalho, F., Charan, J., Chatterjee, S., Chattu, S. K., Chattu, V. K., Chowdhury, M., Chu, D-T., Cook, A., Cormier, N. M., Cowden, R., Culquichicon, C., Dagnew, B., Dahlawi, S. M. A., Damiani, G., Daneshpajouhnejad, P., Daoud, F., Daryani, A., das Neves, J., Weaver, N., Molla, M., Deribe, K., Desta, A., Deuba, K., Dharmaratne, S. D., Dhungana, G. P., Diaz, D., Djalalinia, S., Doku, P., Dubljanin, E., Duko, B., Eagan, A. W., Earl, L., Eaton, J., Effiong, A., Zaki, M. E. S., El Tantawi, M., Elayedath, R., El-Jaafary, S. I., Elsharkawy, A., Eskandarieh, S., Eyawo, O., Ezzikouri, S., Fasanmi, A., Fasil, A., Fauk, N. K., Feigin, V. L., Ferede, T., Fernandes, E., Fischer, F., Foigt, N. A., Folayan, M. O., Foroutan, M., Francis, J., Fukumoto, T., Gad, M. M., Geberemariyam, B., Gebregiorgis, B., Gebremichael, B., Gesesew, H. A., Getacher, L., Ghadiri, K., Ghashghaee, A., Gilani, S. A., Ginindza, T. G. G., Glagn, M., Golechha, M., Gona, P. N., Gubari, M. I. M., Gugnani, H. C., Guido, D., Guled, R., Hall, B. A., Hamidi, S., Handiso, D. W., Hargono, A., Hashi, A., Hassanipour, S., Hassankhani, H., Hayat, K., Herteliu, C., de Hidru, H., Holla, R., Hosgood, H., Hossain, N., Hosseini, M., Hosseinzadeh, M., Househ, M., Hwang, B-F., Ibitoye, S. E., Ilesanmi, O. S., Ilic, I. M., Ilic, M. D., Irvani, S. S. N., Iwu, C. C. D., Iwu, C. J., Iyamu, I. O., Jain, V., Jakovljevic, M., Jalilian, F., Jha, R. P., Johnson, K., Joshua, V., Joukar, F., Jozwiak, J. J., Kabir, A., Kalankesh, L. R., Kalhor, R., Kamath, A., Kamyari, N., Kanchan, T., Matin, B. K., Karch, A., Karimi, S. E., Kasa, A., Kassahun, G., Kayode, G. A., Karyani, A. K., Keiyoro, P. N., Kelkay, B., Khalid, N., Khan, G., Khan, J., Khan, M., Khatab, K., Khazaei, S., Kim, Y. J., Kisa, A., Kisa, S., Kochhar, S., Kopec, J. A., Kosen, S., Laxminarayana, S. L. K., Koyanagi, A., Krishan, K., Defo, B. K., Kugbey, N., Kulkarni, V., Kumar, M., Kumar, N., Kurmi, O. P., Kusuma, D. ORCID: 0000-0002-1909-9341, Kuupiel, D., Kyu, H., La Vecchia, C., Lal, D. K., Lam, J., Landires, I., Lasrado, S., Lazarus, J., Lazzar-Atwood, A., Lee, P., Leshargie, C.T., Li, B., Liu, X., Lopukhov, P., Amin, H., Madi, D., Mahasha, P. W., Majeed, A., Maleki, A., Maleki, S., Mamun, A. A., Manafi, N., Mansournia, M. A., Martins-Melo, F. R., Masoumi, S. Z., Mayala, B. K., Meharie, B. G., Meheretu, H., Meles, H., Melku, M., Mendoza, W., Mengesha, E. W., Meretoja, T. J., Mersha, A. M., Mestrovic, T., Miller, T., Mirica, A., Alavijeh, M., Mohamad, O., Mohammad, Y., Mohammadian-Hafshejani, A., Mohammed, J. A., Mohammed, S., Mohammed, S., Mokdad, A. H., Mokonnon, T., Molokhia, M., Moradi, M., Moradi, Y., Moradzadeh, R., Moraga, P., Mosser, J. F., Munro, S. B., Mustafa, G., Muthupandian, S., Naderi, M., Nagarajan, A. J., Naghavi, M., Naveed, M., Nayak, V., Nazari, J., Ndejjo, R., Nepal, S., Netsere, H. B., Ngalesoni, F., Nguefack-Tsague, G., Ngunjiri, J. W., Nigatu, Y. T., Nigussie, S. N., Nnaji, C. A., Noubiap, J. J., Nunez-Samudio, V., Oancea, B., Odukoya, O. O., Ogbo, F. A., Oladimeji, O., Olagunju, A. T., Olusanya, B. O., Olusanya, J. O., Omer, M., Omonisi, A., Onwujekwe, O. E., Orisakwe, O., Otstavnov, N., Owolabi, M. O., Mahesh, P. A., Padubidri, J. R., Pakhale, S., Pana, A., Pandi-Perumal, S. R., Patel, U., Pathak, M., Patton, G. C., Pawar, S., Peprah, E. K., Pokhrel, K. N., Postma, M. J., Pottoo, F., Pourjafar, H., Pribadi, D., Syed, Z. Q., Rafiei, A., Rahim, F., Rahman, M. M., Rahmani, A. M., Ram, P., Rana, J., Ranabhat, C. L., Rao, S., Rao, S. J., Rathi, P., Rawaf, D. L., Rawaf, S., Rawassizadeh, R., Renjith, V., Reta, M. A., Rezaei, N., Rezapour, A., Ribeiro, A. I., Ross, J., Rumisha, S. F., Sagar, R., Sahu, M., Sajadi, S. M., Salem, M. R., Samy, A. M., Sathian, B., Schutte, A. E., Seidu, A-A., Sha, F., Shafaat, O., Shahbaz, M., Shaikh, M. A., Shaka, M., Sheikh, A., Shibuya, K., Shin, J. I. l., Shivakumar, K. M., Sidemo, N. B., Singh, J. A., Skryabin, V. Y., Skryabina, A. A., Soheili, A., Soltani, S., Somefun, O., Sorrie, M. B., Spurlock, E. E., Sufiyan, M. B., Taddele, B. W., Tadesse, E. G., Tamir, Z., Tamiru, A.T., Tanser, F., Taveira, N., Tehrani-Banihashemi, A., Tekalegn, Y., Tesfay, F., Tessema, B., Tessema, Z. T., Thakur, B., Tolani, M. A., Topor-Madry, R., Torrado, M., Tovani-Palone, M. R., Traini, E., Tsai, A., Tsegaye, G. W., Ullah, I., Ullah, S., Umeokonkwo, C. D., Unnikrishnan, B., Vardavas, C., Violante, F. S., Vo, B., Wado, Y. D., Waheed, Y., Wamai, R. G., Wang, Y., Ward, P., Werdecker, A., Wickramasinghe, N. D., Wijeratne, T., Wiysonge, C. S., Wondmeneh, T., Yamada, T., Yaya, S., Yeshaw, Y., Yeshitila, Y., Yilma, M. T., Yip, P., Yonemoto, N., Yosef, T., Yusefzadeh, H., Zaidi, S., Zaki, L., Zamanian, M., Zastrozhin, M. S., Zastrozhina, A., Zewdie, D., Zhang, Y., Zhang, Z-J, Ziapour, A., Hay, S. I. & Dwyer-Lindgren, L. (2021). Subnational mapping of HIV incidence and mortality among individuals aged 15-49 years in sub-Saharan Africa, 2000-18: a modelling study. The Lancet HIV, 8(6), e363-e375. doi: 10.1016/s2352-3018(21)00051-5
Selim, O., Gowree, E., Lagemann, C. , Talboys, E. ORCID: 0000-0001-8993-0180, Jagadeesh, C. & Bruecker, C. ORCID: 0000-0001-5834-3020 (2021). The Peregrine Falcon's Dive: On the Pull-Out Maneuver and Flight Control Through Wing-Morphing. AIAA Journal: devoted to aerospace research and development, 59(10), pp. 3979-3987. doi: 10.2514/1.j060052
Shadlou, M., Cacciola, P., Ayoub, A. ORCID: 0000-0002-2670-9662 , Rashed, Y. & Tombari, A. (2021). Non-invasive vibrating control of the Zoser Pyramid. In: COMPDYN Proceedings. 8th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, 28-30 June 2021, Athens, Greece.
Sharbirin, A. S., Zaini, M. K. A., Brambilla, G. , Rahman, B. M. ORCID: 0000-0001-6384-0961, Grattan, K. T. V. ORCID: 0000-0003-2250-3832 & Ahmad, H. (2021). 3D-printed Tilt Sensor based on an embedded Two-mode Fiber Interferometer. IEEE Sensors Journal, 21(6), pp. 7565-7571. doi: 10.1109/jsen.2021.3050756
Sheikh, M., Qassem, M. & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2021). Optical Determination of Lithium Levels in Artificial Interstitial Fluid for Treatment Management of Bipolar Disorder. In: 2021 43rd Annual International Conference of the IEEE Engineering in Medicine & Biology Society (EMBC). 43rd Annual International Conference of the IEEE Engineering in Medicine & Biology Society (EMBC), 1-5 Nov 2021, Mexico. doi: 10.1109/EMBC46164.2021.9630680
Sheikh, M., Qassem, M. ORCID: 0000-0003-0730-3189 & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2021). Wearable, Environmental, and Smartphone-Based Passive Sensing for Mental Health Monitoring. Frontiers in Digital Health, 3, article number 662811. doi: 10.3389/fdgth.2021.662811
Silver, J., Grattan, K. T. V. ORCID: 0000-0003-2250-3832 & Del'Haye, P. (2021). Critical dynamics of an asymmetrically bidirectionally pumped optical microresonator. Physical Review A, 104(4), article number 043511. doi: 10.1103/physreva.104.043511
Silver, J. M., Del Bino, L., Woodley, M. T. M. , Ghalanos, G. N., Svela, A., Moroney, N., Zhang, S., Grattan, K. T. V. ORCID: 0000-0003-2250-3832 & Del'Haye, P. (2021). Nonlinear enhanced microresonator gyroscope. OPTICA, 8(9), pp. 1219-1226. doi: 10.1364/optica.426018
Singh, H., Kaufmann, N., Ouro, P. , Papadakis, G. & Manolesos, M. ORCID: 0000-0002-5506-6061 (2021). On the use of vortex generators to improve tidal turbine performance. In: Proceedings of the European Wave and Tidal Energy Conference. 14th European Wave and Tidal Energy Conference, EWTEC, 5-9 Sep 2021, Online.
Song, G., Cheng, J., Hu, B. , Zhu, F., Zhang, H., Liu, T., Sun, T. ORCID: 0000-0003-3861-8933 & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2021). Determination of First Arrival Wave Type of Microseismic Signals and Approach to Wave Velocity Correction. Shock and Vibration, 2021(1), pp. 1-11. doi: 10.1155/2021/6631374
Soomro, A., Pullen, K. R. ORCID: 0000-0001-8501-9226 & Amiryar, M. E. (2021). Hybrid PV System with High Speed Flywheel Energy Storage for Remote Residential Loads. Clean Technologies, 3(2), pp. 351-376. doi: 10.3390/cleantechnol3020020
Soomro, A.H. (2021). Induction machine based flywheel energy storage system for isolated microgrid applications. (Unpublished Doctoral thesis, City, University of London)
Sriram, V., Agarwal, S., Yan, S. ORCID: 0000-0001-8968-6616 , Xie, Z., Saincher, S., Schlurmann, T., Ma, Q. ORCID: 0000-0001-5579-6454, Stoesser, T., Zhuang, Y., Han, B., Zhao, W., Yang, X., Li, Z., Wan, D., Zhang, Y., Teng, B., Ning, D., Zhang, N., Zheng, X., Xu, G., Gong, J., Li, Y., Liao, K., Duan, W., Hann, R., Asnim, W., Sulaiman, Z., Zhoungyuan, Z., Qin, J., Li, Y., Song, Z., Lou, X., Lu, L., Yuan, C., Ma, Y., Ai, C., Dong, G., Sun, H., Wang, Q., Zhai, Z-T., Shao, Y-L., Lin, Z., Qian, L., Bai, W., Ma, Z., Higuera, P., Buldakov, E., Stagonas, D., Lopez, S., Christou, A., Lin, P., Li, Y., Lu, J., Hong, S., Ha, Y., Kim, K-M., Cho, S-K., Park, D-M., Laskowski, W., Eskilsson, C., Ricchiuto, M., Engsig-Karup, A. P., Cheng, L., Zheng, J., Gu, H. & Li, G. (2021). A Comparative Study on the Nonlinear Interaction Between a Focusing Wave and Cylinder Using State-of-the-art Solvers: Part A. International Journal of Offshore and Polar Engineering, 31(1), pp. 1-10. doi: 10.17736/ijope.2021.jc820
Sriram, V. & Ma, Q. ORCID: 0000-0001-5579-6454 (2021). Review on the local weak form-based meshless method (MLPG): Developments and Applications in Ocean Engineering. Applied Ocean Research, 116, article number 102883. doi: 10.1016/j.apor.2021.102883
Stavropoulos Vasilakis, E., Rodriguez, C., Kyriazis, N. , Malgarinos, I., Koukouvinis, P. ORCID: 0000-0002-3945-3707 & Gavaises, M. ORCID: 0000-0003-0874-8534 (2021). A direct forcing Immersed Boundary Method for Cavitating Flows. International Journal for Numerical Methods in Fluids, 93(10), pp. 3092-3130. doi: 10.1002/fld.5026
Stefanidou, S. P., Papanikolaou, V. K., Paraskevopoulos, E. A. & Kappos, A. J. ORCID: 0000-0002-5566-5021 (2021). Machine learning techniques for the estimation of limit state thresholds and bridge-specific fragility analysis of R/C bridges. In: Proceedings of the International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering. 8th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, 28 - 30 Jun 2021, Streamed from Athens, Greece.
Stefanitsis, D., Koukouvinis, F. ORCID: 0000-0002-3945-3707, Nikolopoulos, N. & Gavaises, M. ORCID: 0000-0003-0874-8534 (2021). Numerical Investigation of the Aerodynamic Droplet Breakup at Mach Numbers Greater Than 1. Journal of Energy Engineering, 147(1), article number 04020077. doi: 10.1061/(asce)ey.1943-7897.0000720
Sun, S., Wu, P., Guo, P. , Yi, G. & Kovacevic, A. ORCID: 0000-0002-8732-2242 (2021). Numerical Investigation on a Twin-Screw Multiphase Pump Under low IGVF. International Journal of Fluid Machinery and Systems, 14(4), pp. 335-344. doi: 10.5293/ijfms.2021.14.4.335
Sun, S. H., Wu, P. B., Guo, P. C. , Yi, G. Z., Kovacevic, A. ORCID: 0000-0002-8732-2242, Zhang, H. & Wu, G. K. (2021). Numerical investigation on a double suction twin-screw multiphase pump. In: IOP Conference Series: Earth and Environmental Science. 30th IAHR Symposium on Hydraulic Machinery and Systems, 21-26 Mr 2021, Virtual. doi: 10.1088/1755-1315/774/1/012048
Syed, A. U., Martinez, F. D., Roberts, T. , Encinas-Oropesa, A., Morar, N. I. ORCID: 0000-0001-9109-8864, Grohne, M., Frommherz, M., Nicholls, J. R. & Gray, S. (2021). Performance Comparison Between Isothermal Hot Corrosion And In Situ Cyclic Hot Corrosion of Nickel-Based Superalloys. Oxidation of Metals, 96(1-2), pp. 43-55. doi: 10.1007/s11085-021-10044-9
Taghinezhad, J., Alimardani, R., Masdari, M. ORCID: 0000-0002-1159-2406 & Mahmoodi, E. (2021). Performance optimization of a dual-rotor ducted wind turbine by using response surface method. Energy Conversion and Management: X, 12, article number 100120. doi: 10.1016/j.ecmx.2021.100120
Tahir, S., Tahir, H., Sajjad, A. , Rajarajan, M. ORCID: 0000-0001-5814-9922 & Khan, F. (2021). Privacy-preserving COVID-19 Contact Tracing Blockchain. Journal of Communications and Networks, 23(5), pp. 360-373. doi: 10.23919/jcn.2021.000031
Talboys, E. (2021). On the aerodynamic and aeroacoustic effect of passive trailing edge flaplets. (Unpublished Doctoral thesis, City, University of London)
Talboys, E. ORCID: 0000-0001-8993-0180, Geyer, T. F., Pruefer, F. & Bruecker, C. ORCID: 0000-0001-5834-3020 (2021). A parametric study of the effect of self-oscillating trailing-edge flaplets on aerofoil self-noise. Applied Acoustics, 177, article number 107907. doi: 10.1016/j.apacoust.2020.107907
Talboys, E. ORCID: 0000-0001-8993-0180, Geyer, T. F., Prüfer, F. & Brücker, C. ORCID: 0000-0001-5834-3020 (2021). The Aeroacoustic Effect of Different Inter-Spaced Self-oscillating Passive Trailing Edge Flaplets. In: Braza, M., Hoarau, Y., Zhou, Y. , Lucey, A. D., Huang, L. & Stavroulakis, G. E. (Eds.), Fluid-Structure-Sound Interactions and Control. FSSIC 2019. Lecture Notes in Mechanical Engineering. (pp. 161-166). Singapore: Springer. doi: 10.1007/978-981-33-4960-5_25
Tian, X., Geng, Y., Sarkis, J. , Gao, C., Sun, X., Micic, T. ORCID: 0000-0001-6129-7694, Hao, H. & Wang, X. (2021). Features of critical resource trade networks of lithium-ion batteries. Resources Policy, 73, article number 102177. doi: 10.1016/j.resourpol.2021.102177
Tian, Z., Chen, N-K., Shum, P. P. , Suo, L., Yao, Y., Zhang, L., Grattan, K. T. V. ORCID: 0000-0003-2250-3832, Rahman, B. M. ORCID: 0000-0001-6384-0961 & Kashyap, R. (2021). Fiber-optic displacement sensor with 4 nm resolution (similar to lambda/400) at 1550 nm using off-axis interferometer. In: 2021 Conference on Lasers and Electro-Optics (CLEO). CLEO: Applications and Technology 2021, 9-14 May 2021, California, USA.
Tian, Z., Chen, N-K., Shum, P. P. , Yao, C-K., Zhang, L., Yao, Y., Grattan, K. T. V. ORCID: 0000-0003-2250-3832, Ren, S. & Wu, Q. (2021). Erbium-doped dual wavelength fiber laser interferometric proximity sensor with +/- 16 nm measurement accuracy. In: 2021 Conference on Lasers and Electro-Optics (CLEO). CLEO: Applications and Technology 2021, 9-14 May 2021, California, USA.
Tomas-Rodriguez, M. ORCID: 0000-0001-9630-9579, Revestido Herrero, E. & Velasco, F. J. (2021). Iterative Self-Tuning Minimum Variance Control of a Nonlinear Autonomous Underwater Vehicle Maneuvering Model. Electronics, 10(21), article number 2686. doi: 10.3390/electronics10212686
Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979, Lau, C. K. & Alonso-Rodríguez, A. (2021). Experimental behaviour of non-seismical RWS connections with perforated beams under cyclic actions. Journal of Constructional Steel Research, 183, article number 106756. doi: 10.1016/j.jcsr.2021.106756
Vakilipour, S., Zarafshani, H. & Al-Zaili, J. ORCID: 0000-0003-4072-2107 (2021). Numerical study of longitudinal vein effects on the aerodynamic characteristics of a corrugated bio-airfoil. Computers & Fluids, 216, article number 104821. doi: 10.1016/j.compfluid.2020.104821
Veerasamy, D., Atkin, C.J. & Ponnusami, S. A. ORCID: 0000-0002-2143-8971 (2021). Aerofoil wake-induced transition characteristics on a flat-plate boundary layer. Journal of Fluid Mechanics, 920, article number A29. doi: 10.1017/jfm.2021.452
Verma, S., Ghosh, S. & Rahman, B. M. A. ORCID: 0000-0001-6384-0961 (2021). All-Opto Plasmonic-Controlled Bulk and Surface Sensitivity Analysis of a Paired Nano-Structured Antenna with a Label-Free Detection Approach. Sensors, 21(18), article number 6166. doi: 10.3390/s21186166
Vert, M., Sharpanskykh, A. & Curran, R. ORCID: 0009-0008-4349-4449 (2021). Adaptive Resilience of Complex Safety-Critical Sociotechnical Systems: Toward a Unified Conceptual Framework and Its Formalization. Sustainability, 13(24), article number 13915. doi: 10.3390/su132413915
Viana, I. B., Kanchwala, H., Ahiska, K. & Aouf, N. ORCID: 0000-0001-9291-4077 (2021). A Comparison of Trajectory Planning and Control Frameworks for Cooperative Autonomous Driving. Journal of Dynamic Systems, Measurement, and Control, 143(7), article number 071002. doi: 10.1115/1.4049554
Vidal Roncero, A. ORCID: 0000-0001-8177-518X, Kolovos, K., Gold, M. , Pearson, R., Koukouvinis, P. ORCID: 0000-0002-3945-3707 & Gavaises, M. ORCID: 0000-0003-0874-8534 (2021). Preferential cavitation and friction-induced heating of multi-component Diesel fuel surrogates up to 450MPa. International Journal of Heat and Mass Transfer, 166, article number 120744. doi: 10.1016/j.ijheatmasstransfer.2020.120744
Villoslada, D., Santos, M. & Tomas-Rodriguez, M. ORCID: 0000-0001-9630-9579 (2021). General Methodology for the Identification of Reduced Dynamic Models of Barge-Type Floating Wind Turbines. Energies, 14(13), article number 3902. doi: 10.3390/en14133902
Vlahakis, E. E. & Halikias, G. ORCID: 0000-0003-1260-1383 (2021). Model-matching methods and distributed control of networks consisting of a class of heterogeneous dynamic agents. International Journal of Control, 95(8), pp. 2066-2082. doi: 10.1080/00207179.2021.1893822
Wang, G., Dong, P., Lu, Y. ORCID: 0000-0003-1395-9985 , Zeng, M. & Zhang, Q. (2021). Experimental and theoretical investigation on the surface tension of nano-Lithium Bromide solution. International Communications in Heat and Mass Transfer, 123, article number 105231. doi: 10.1016/j.icheatmasstransfer.2021.105231
Wang, Z. (2021). Optimal design of wind-excited tuned mass-damper-inerter (TMDI)-equipped tall buildings. (Unpublished Doctoral thesis, City, University of London)
Wang, J., Ma, Q. & Yan, S. ORCID: 0000-0001-8968-6616 (2021). On Extreme Waves in Directional Seas with Presence of Oblique Current. Applied Ocean Research, 112, article number 102586. doi: 10.1016/j.apor.2021.102586
Wang, J., Ma, Q. ORCID: 0000-0001-5579-6454, Yan, S. ORCID: 0000-0001-8968-6616 & Liang, B. (2021). Modelling Crossing Random Seas by Fully Nonlinear Numerical Simulations. Frontiers in Physics, 9, article number 593394. doi: 10.3389/fphy.2021.593394
Wang, L., Yi, J., Zhang, J. , Chen, W. & Fu, F. ORCID: 0000-0002-9176-8159 (2021). Short-term flexural stiffness prediction of CFRP bars reinforced coral concrete beams. Materials, 14(2), article number 467. doi: 10.3390/ma14020467
Wang, Z. & Giaralis, A. ORCID: 0000-0002-2952-1171 (2021). Enhanced motion control performance of the tuned mass damper inerter (TMDI) through primary structure shaping. Structural Control and Health Monitoring, 28(8), article number e2756. doi: 10.1002/stc.2756
Wang, Z. & Giaralis, A. ORCID: 0000-0002-2952-1171 (2021). Top-Story Softening for Enhanced Mitigation of Vortex Shedding-Induced Vibrations in Wind-Excited Tuned Mass Damper Inerter-Equipped Tall Buildings. Journal of Structural Engineering, 147(1), article number 04020283. doi: 10.1061/(asce)st.1943-541x.0002838
Werner, J., Belz, M., Klein, K-F. , Sun, T. ORCID: 0000-0003-3861-8933 & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2021). Characterization of a Fast Response Fiber-Optic pH Sensor and Illustration in a Biological Application. The Analyst, 146(15), pp. 4811-4821. doi: 10.1039/d1an00631b
Werner, J.S., Belz, M., Klein, K-F. , Sun, T. ORCID: 0000-0003-3861-8933 & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2021). Characterization of a fast response fiber-optic pH sensor and measurements in a biological application. Proceedings of SPIE - International Society for Optical Engineering, 11635, article number 116350A. doi: 10.1117/12.2585735
Werner, J.S., Belz, M., Klein, K-F. , Sun, T. ORCID: 0000-0003-3861-8933 & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2021). Fiber Optic Sensor Designs and Luminescence-based Methods for the detection of Oxygen and pH measurement. Measurement, 178, article number 109323. doi: 10.1016/j.measurement.2021.109323
White, M. ORCID: 0000-0002-7744-1993 (2021). Cycle and turbine optimisation for an ORC operating with two-phase expansion. Applied Thermal Engineering, 192, article number 116852. doi: 10.1016/j.applthermaleng.2021.116852
White, M. ORCID: 0000-0002-7744-1993 (2021). Investigating the Validity of the Fundamental Derivative in the Equilibrium and Non-equilibrium Two-Phase Expansion of MM. In: Pini, M., De Servi, C., Spinelli, A. , di Mare, F. & Guardone, A. (Eds.), Proceedings of the 3rd International Seminar on Non-Ideal Compressible Fluid Dynamics for Propulsion and Power. NICFD 2020. doi: 10.1007/978-3-030-69306-0_1
White, M. ORCID: 0000-0002-7744-1993, Bianchi, G., Chai, L. , Tassou, S. A. & Sayma, A. I. ORCID: 0000-0003-2315-0004 (2021). Review of supercritical CO2 technologies and systems for power generation. Applied Thermal Engineering, 185(116447), article number 116447. doi: 10.1016/j.applthermaleng.2020.116447
White, M. ORCID: 0000-0002-7744-1993 & Turunen-Saaresti, T. (2021). Simulation of a supersonic stator vane under two-phase inlet conditions. Proceedings of the 6th International Seminar on ORC Power Systems, doi: 10.14459/2021mp1632898
Yan, D., Tian, Z., Chen, N-K. , Zhang, L., Yao, Y., Xie, Y., Shum, P. P., Grattan, K. T. V. ORCID: 0000-0003-2250-3832 & Wang, D. (2021). Observation of split evanescent field distributions in tapered multicore fibers for multiline nanoparticle trapping and microsensing. Optics Express, 29(6), pp. 9532-9543. doi: 10.1364/oe.419194
Yang, J., Xiao, G., Ghavami, M. ORCID: 0000-0002-0772-7726 , Al-Zaili, J. ORCID: 0000-0003-4072-2107, Yang, T., Sayma, A. I. ORCID: 0000-0003-2315-0004 & Ni, D. (2021). Thermodynamic modelling and real-time control strategies of solar micro gas turbine system with thermochemical energy storage. Journal of Cleaner Production, 304, article number 127010. doi: 10.1016/j.jclepro.2021.127010
Yang, Y., Bei, X. & Fu, F. ORCID: 0000-0002-9176-8159 (2021). Static performance of square CFDST chord to steel SHS brace T-joints. Journal of Constructional Steel Research, 183, article number 106726. doi: 10.1016/j.jcsr.2021.106726
Yang, Y., Fu, F. ORCID: 0000-0002-9176-8159 & Bie, X-M. (2021). Behaviour of rectangular RACFST slender columns under eccentric compression. Journal of Building Engineering, 38, article number 102236. doi: 10.1016/j.jobe.2021.102236
Yang, Y., Fu, F. ORCID: 0000-0002-9176-8159, Bie, X. & Dai, X. (2021). Axial compressive behaviour of CFDST stub columns with large void ratio. Journal of Constructional Steel Research, 186, article number 106892. doi: 10.1016/j.jcsr.2021.106892
Ye, F., Bianchi, G., Rane, S. , Tassou, S. A. & Deng, J. (2021). Analytical grid generation and numerical assessment of tip leakage flows in sliding vane rotary machines. Advances in Engineering Software, 159, article number 103030. doi: 10.1016/j.advengsoft.2021.103030
Ye, F., Bianchi, G., Rane, S. , Tassou, S. A. & Deng, J. (2021). Numerical methodology and CFD simulations of a rotary vane energy recovery device for seawater reverse osmosis desalination systems. Applied Thermal Engineering, 190, article number 116788. doi: 10.1016/j.applthermaleng.2021.116788
You, Y., Khayyer, A., Zheng, X. , Gotoh, H. & Ma, Q. ORCID: 0000-0001-5579-6454 (2021). Enhancement of 8-SPH for ocean engineering applications through incorporation of a background mesh scheme. Applied Ocean Research, 110, article number 102508. doi: 10.1016/j.apor.2020.102508
Zeytinci, B. M., Sahin, M., Guler, M. A. & Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 (2021). A practical design formulation for perforated beams with openings strengthened with ring type stiffeners subject to Vierendeel actions. Journal of Building Engineering, 43, article number 102915. doi: 10.1016/j.jobe.2021.102915
Zhang, H., Yang, X., Lu, L. , Chen, J., Rahman, B. M. ORCID: 0000-0001-6384-0961 & Zhou, L. (2021). Comparison of the phase change process in a GST-loaded silicon waveguide and MMI. Optics Express, 29(3), pp. 3503-3514. doi: 10.1364/oe.413660
Zhang, N., Yan, S. ORCID: 0000-0001-8968-6616, Ma, Q. ORCID: 0000-0001-5579-6454 & Zheng, X. (2021). A QSFDI based Laplacian discretisation for modelling wave-structure interaction using ISPH. Applied Ocean Research, 117, article number 102954. doi: 10.1016/j.apor.2021.102954
Zhang, N., Yan, S. ORCID: 0000-0001-8968-6616, Zheng, X. & Ma, Q. ORCID: 0000-0001-5579-6454 (2021). Numerical study on the dynamic interaction between ice and a vertical compliant structure by smoothed particle hydrodynamics. In: Proceedings of the International Offshore and Polar Engineering Conference. The 31st International Ocean and Polar Engineering Conference, 20-25 June 2021, Rhodes, Greece.
Zhang, N., Yan, S. ORCID: 0000-0001-8968-6616, Zheng, X. , Xu, G. & Ma, Q. ORCID: 0000-0001-5579-6454 (2021). Numerical Study of Interaction of Focused Waves with a Fixed Cylinder by a Hybrid Model Coupling SPH and QALE-FEM. International Journal of Offshore and Polar Engineering, 31(1), pp. 45-52. doi: 10.17736/ijope.2021.jc813
Zhang, Y., Wang, J., Gao, S. , Wang, S. & Fu, F. ORCID: 0000-0002-9176-8159 (2021). Tensile resistance of bolted angle connections in the beam-column joint against progressive collapse. Engineering Structures, 236, article number 112106. doi: 10.1016/j.engstruct.2021.112106
Zhu, W., Jia, K., Fu, F. ORCID: 0000-0002-9176-8159 , Lan, D. & Qian, K. (2021). A New Design of Cable Anchor for Ultra-High Fatigue Stress Cable Net of Largest Telescope in the World. Thin Walled Structures, 159, article number 107280. doi: 10.1016/j.tws.2020.107280
2020
Acarali, D., Rajarajan, M., Chema, D. & Ginzburg, M. (2020). Modelling DoS Attacks & Interoperability in the Smart Grid. 2020 29th International Conference on Computer Communications and Networks (ICCCN), doi: 10.1109/icccn49398.2020.9209671
Ahmed, I. M. & Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 (2020). Shear connection of prefabricated slabs with LWC - Part 1: Experimental and analytical studies. Journal of Constructional Steel Research, 169, article number 106016. doi: 10.1016/j.jcsr.2020.106016
Alber, J., Soto-Valle, R., Manolesos, M. ORCID: 0000-0002-5506-6061 , Bartholomay, S., Navid Nayeri, C., Schönlau, M., Menzel, C., Oliver Paschereit, C., Twele, J. & Fortmann, J. (2020). Aerodynamic effects of Gurney flaps on the rotor blades of a research wind turbine. Wind Energy Science, 5(4), pp. 1645-1662. doi: 10.5194/wes-5-1645-2020
Ali, M. I., Azam, M. S., Ranjan, V. & Banerjee, J. R. (2020). Free vibration of sigmoid functionally graded plates using the dynamic stiffness method and the Wittrick-Williams algorithm. Computers and Structures, 244, article number 106424. doi: 10.1016/j.compstruc.2020.106424
Alsanat, H., Gunalan, S., Poologanathan, K. , Guan, H. & Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 (2020). Numerical investigation of web crippling in fastened aluminium lipped channel sections under two-flange loading conditions. Structures, 23, pp. 351-365. doi: 10.1016/j.istruc.2019.10.012
Altamimi, F., Asift, W. & Rajarajan, M. ORCID: 0000-0001-5814-9922 (2020). DADS: Decentralized (Mobile) Applications Deployment System Using Blockchain. In: Proceedings of the 2020 international conference on computer, information and telecommunication systems (CITS). 2020 International Conference on Computer, Information and Telecommunication Systems (CITS), 5-7 Oct 2020, Hangzhou, China. doi: 10.1109/CITS49457.2020.9232506
Amend, M., Bogenfeld, E., Cvjetkovic, M. , Rakocevic, V. ORCID: 0000-0002-3081-0448, Pieska, M., Kassler, A. & Brunstrom, A. (2020). A Framework for Multiaccess Support for Unreliable Internet Traffic using Multipath DCCP. In: 2019 IEEE 44th Conference on Local Computer Networks (LCN). doi: 10.1109/LCN44214.2019.8990746
Amiryar, M. E. & Pullen, K. R. ORCID: 0000-0001-8501-9226 (2020). Analysis of Standby Losses and Charging Cycles in Flywheel Energy Storage Systems. Energies, 13(17), article number 4441. doi: 10.3390/en13174441
An, D., Nourry, J., Gharavian, S. , Thakur, V. K., Aria, I., Cardenas, I., Khaleque, T. & Yazdani Nezhad, H. ORCID: 0000-0003-0832-3579 (2020). Strain self-sensing tailoring in functionalised carbon nanotubes/epoxy nanocomposites in response to electrical resistance change measurement. In: TESConf 2020 - 9th International Conference on Through-life Engineering Services. 9th International Conference on Through-life Engineering Service, 3-4 Nov 2020, Cranfield, UK. doi: 10.2139/ssrn.3718026
Ayoub, A. (2020). Mixed Formulation of Inelastic Composite Shear Beam Element. Journal of Structural Engineering, 146(10), article number 04020222. doi: 10.1061/(asce)st.1943-541x.0002648
Baishya, N. (2020). In-vitro and In-vivo spectrometric investigations on the behavior oflactate under conditions emulating septic shock. (Unpublished Doctoral thesis, City, University of London)
Baishya, N. ORCID: 0000-0002-2231-6132, Mamouei, M. H., Budidha, K. , Qassem, M. ORCID: 0000-0003-0730-3189, Vadgama, P. & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2020). In-vitro spectrometric analysis of hyperlactatemia and lactic acidosis in buffer relating to sepsis. Journal of Near Infrared Spectroscopy, 29(1), pp. 53-59. doi: 10.1177/0967033520968951
Baishya, N., Mamouei, M. H., Budidha, K. ORCID: 0000-0002-6329-8399 , Qassem, M. ORCID: 0000-0003-0730-3189, Vadgama, P. & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2020). Investigations into the Effects of pH on Quantitative Measurements of Lactate in Biological Media Using ATR-FTIR Spectroscopy. Molecules, 25(16), article number 3695. doi: 10.3390/molecules25163695
Baishya, N. ORCID: 0000-0002-2231-6132, Mamouei, M. H., Budidha, K. ORCID: 0000-0002-6329-8399 , Qassem, M. ORCID: 0000-0003-0730-3189, Vadgama, P. & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2020). Near Infrared and Aquaphotomic analysis of water absorption in lactate containing media. In: Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS. 42nd Annual International Conference of the IEEE Engineering in Medicine & Biology Society (EMBC), 20-24 Jul 2020, Online. doi: 10.1109/EMBC44109.2020.9176675
Baishya, N., Momouei, M., Budidha, K. ORCID: 0000-0002-6329-8399 , Qassem, M. ORCID: 0000-0003-0730-3189, Vadgama, P. & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2020). Near infrared spectrometric investigation of lactate in a varying pH buffer. Journal of Near Infrared Spectroscopy, 28(5-6), pp. 328-333. doi: 10.1177/0967033520905374
Banerjee, J. R., Ananthapuvirajah, A., Liu, X. & Sun, C. (2020). Coupled axial-bending dynamic stiffness matrix and its applications for a Timoshenko beam with mass and elastic axes eccentricity. Thin-Walled Structures, 159, article number 107197. doi: 10.1016/j.tws.2020.107197
Banerjee, J. R., Ananthapuvirajah, A. & Papkov, S. O. (2020). Dynamic stiffness matrix of a conical bar using the Rayleigh-Love theory with applications. European Journal of Mechanics - A/Solids, 83, article number 104020. doi: 10.1016/j.euromechsol.2020.104020
Barrie, M., Qaban, A. ORCID: 0000-0003-2982-8429 & Naher, S. ORCID: 0000-0003-2047-5807 (2020). The influence of Widmanstätten ferrite, martensite and grain boundary carbides on the strength and impact behaviour of high Al (0.2%) and Nb containing hot rolled steels. Materials and design, 190, article number 108601. doi: 10.1016/j.matdes.2020.108601
Belloni, C., Aouf, N. ORCID: 0000-0001-9291-4077, Balleri, A. , Le Caillec, J-M. & Merlet, T. (2020). Pose-informed deep learning method for SAR ATR. IET Radar, Sonar and Navigation, 14(11), pp. 1649-1658. doi: 10.1049/iet-rsn.2019.0615
Bhide, A., Sedgwick, P., Barrett, B. , Cupples, G., Coates, R. ORCID: 0000-0002-6944-6428, Goodey, R.J. ORCID: 0000-0002-9166-8393, Linton, S. & McCourt, C. ORCID: 0000-0003-4765-5795 (2020). Prostaglandin insert dinoprostone versus trans-cervical balloon catheter for outpatient labour induction: a randomised controlled trial of feasibility (PROBIT-F). Pilot and Feasibility Studies, 6(1), article number 113. doi: 10.1186/s40814-020-00661-7
Binetti, L., Del Villar, I., Prabuddha Dissanayake, K. , Stankiewicz, A., Sun, T. ORCID: 0000-0003-3861-8933, Grattan, K. T. V. ORCID: 0000-0003-2250-3832 & Alwis, L. S. M. (2020). Monitoring of the Critical Meniscus of Very Low Liquid Volumes Using an Optical Fiber Sensor. IEEE Sensors Journal, 20(20), pp. 12232-12240. doi: 10.1109/jsen.2020.2999537
Bobba, S. S., Hamdouni, N., Pande, K. , Namassivayane, K., Agrawal, A. & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2020). Design and optimization of perovskite plasmonic nano-laser for operation at room temperature. Journal of Laser Application, 32(2), article number 022017. doi: 10.2351/1.5135001
Boiarkin, V., Asif, W. & Rajarajan, M. ORCID: 0000-0001-5814-9922 (2020). Decentralized Demand Response Power Management System for Smart Grids. In: 2020 IEEE 8th International Conference on Smart Energy Grid Engineering (SEGE). 8th International Conference on Smart Energy Grid Engineering (SEGE), 12-14 Aug 2020, Oshawa, ON, Canada. doi: 10.1109/SEGE49949.2020.9182024
Bregar, T., An, D., Gharavian, S. , Burda, M., Durazo-Cardenas, I., Thakur, V. K., Ayre, D., Słoma, M., Hardiman, M., McCarthy, C. T. & Yazdani Nezhad, H. ORCID: 0000-0003-0832-3579 (2020). Carbon nanotube embedded adhesives for real-time monitoring of adhesion failure in high performance adhesively bonded joints. Scientific Reports, 10(1), article number 16833. doi: 10.1038/s41598-020-74076-y
Brooks, S. J. ORCID: 0000-0002-5712-7358 & Roy, R. ORCID: 0000-0001-5491-7437 (2020). A complexity framework for self-engineering systems. Smart and Sustainable Manufacturing Systems, 4(3), pp. 254-259. doi: 10.1520/ssms20200059
Bruecker, C. ORCID: 0000-0001-5834-3020 & Li, Q. (2020). Possible Early Generation of Physiological Helical Flow Could Benefit the Triflo Trileaflet Heart Valve Prosthesis Compared to Bileaflet Valves. Bioengineering, 7(4), article number 158. doi: 10.3390/bioengineering7040158
Brunhart, M. (2020). Cavitation and the application of methods for erosion prediction in high pressure fuel injection systems. (Unpublished Doctoral thesis, City, University of London)
Brunhart, M. ORCID: 0000-0002-2970-8091, Soteriou, C., Gavaises, M. ORCID: 0000-0003-0874-8534 , Karathanassis, I. K. ORCID: 0000-0001-9025-2866, Koukouvinis, F. ORCID: 0000-0002-3945-3707, Jahangir, S. & Poelma, C. (2020). Investigation of cavitation and vapor shedding mechanisms in a Venturi nozzle. Physics of Fluids, 32(8), article number 083306. doi: 10.1063/5.0015487
Budidha, K. ORCID: 0000-0002-6329-8399, Mamouei, M. H., Baishya, N. ORCID: 0000-0002-2231-6132 , Qassem, M. ORCID: 0000-0003-0730-3189, Vadgama, P. & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2020). Identification and Quantitative Determination of Lactate Using Optical Spectroscopy—Towards a Noninvasive Tool for Early Recognition of Sepsis. Sensors, 20(18), article number 5402. doi: 10.3390/s20185402
Cacciola, P., Tombari, A. & Giaralis, A. ORCID: 0000-0002-2952-1171 (2020). An inerter-equipped vibrating barrier for non-invasive motion control of seismically excited structures. Structural Control and Health Monitoring, 27(3), article number e2474. doi: 10.1002/stc.2474
Cai, B., Hao, L. & Fu, F. ORCID: 0000-0002-9176-8159 (2020). Postfire reliability analysis of axial load bearing capacity of CFRP retrofitted concrete columns. Advances in Concrete Construction, 10(4), pp. 289-299. doi: 10.12989/acc.2020.10.4.289
Cai, B., Li, B. & Fu, F. ORCID: 0000-0002-9176-8159 (2020). Finite element analysis and calculation method of residual flexural capacity of post-fire RC beams. International Journal of Concrete Structures and Materials, 14(1), article number 58. doi: 10.1186/s40069-020-00428-7
Cai, B., Pan, G-L. & Fu, F. ORCID: 0000-0002-9176-8159 (2020). Prediction of the Postfire Flexural Capacity of RC Beam Using GA-BPNN Machine Learning. Journal of Performance of Constructed Facilities, 34(6), article number 4020105. doi: 10.1061/(asce)cf.1943-5509.0001514
Cai, B., Pan, G. & Fu, F. ORCID: 0000-0002-9176-8159 (2020). Prediction of the post-fire flexural capacity of RC beam using GA-BPNN Machine Learning. Journal of Performance of Constructed Facilities, 34(6), article number 04020105. doi: 10.1061/(ASCE)CF.1943-5509.0001514
Cai, B., Wu, A. & Fu, F. ORCID: 0000-0002-9176-8159 (2020). Bond behavior of PP fiber-reinforced cinder concrete after fire exposure. Computers and Concrete, An International Journal, 26(2), pp. 115-125. doi: 10.12989/cac.2020.26.2.115
Cai, G., Su, Q., Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 & Degée, H. (2020). Simplified Density Indexes of Walls and Tie-Columns for Confined Masonry Buildings in Seismic Zones. Journal of Earthquake Engineering, 24(3), pp. 447-469. doi: 10.1080/13632469.2018.1453396
Cao, X., Yang, Z., Zhu, W. , Peng, H., Fu, F. ORCID: 0000-0002-9176-8159, Wang, L. & Qian, K. (2020). Experimental study on flexural behavior of new type of prestressed RPC sound barrier for high-speed rail. Structural Concrete, 22(2), pp. 623-636. doi: 10.1002/suco.201900446
Charlton, P. H., Kyriacou, P. A. ORCID: 0000-0002-2868-485X, Mant, J. & Alastruey, J. (2020). Acquiring Wearable Photoplethysmography Data in Daily Life: The PPG Diary Pilot Study. Engineering Proceedings, 2(1), doi: 10.3390/ecsa-7-08233
Chatterjee, S. ORCID: 0000-0002-7735-6123, Budidha, K. ORCID: 0000-0002-6329-8399 & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2020). Investigating the origin of photoplethysmographyusing a multiwavelength Monte Carlo model. Physiological Measurement, 41(8), article number 084001. doi: 10.1088/1361-6579/aba008
Chatterjee, S. ORCID: 0000-0002-7735-6123, Patel, Z., Thaha, M. A. & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2020). In silico and in vivo investigations using an endocavitary photoplethysmography sensor for tissue viability monitoring. Journal of Biomedical Optics, 25(02), article number 027001. doi: 10.1117/1.jbo.25.2.027001
Chekakta, Z. ORCID: 0000-0002-4664-6283, Zerikat, M., Bouzid, Y. & Koubaa, A. (2020). Adaptive fuzzy model-free control for 3D trajectory tracking of quadrotor. International Journal of Mechatronics and Automation, 7(3), pp. 134-146. doi: 10.1504/ijma.2020.109058
Cristofaro, M., Edelbauer, W., Koukouvinis, P. ORCID: 0000-0002-3945-3707 & Gavaises, M. ORCID: 0000-0003-0874-8534 (2020). Influence of diesel fuel viscosity on cavitating throttle flow simulations at erosive operation conditions. ACS Omega, 5(13), pp. 7182-7192. doi: 10.1021/acsomega.9b03623
Crowley, B. J. (2020). High and low frequency dominated boundary layer transition through widely spaced discrete suction perforations. (Unpublished Doctoral thesis, City, University of London)
Dai, K., Huang, H., Lu, Y. , Meng, J., Mao, Z. & Camara, A. ORCID: 0000-0002-1675-2640 (2020). Effects of soil–structure interaction on the design of tuned mass damper to control the seismic response of wind turbine towers with gravity base. Wind Energy, 24(4), pp. 323-344. doi: 10.1002/we.2576
Daminabo, S., Goel, S., Grammatikos, S. , Yazdani Nezhad, H. ORCID: 0000-0003-0832-3579 & Thakur, V. K. (2020). Fused deposition modeling-based additive manufacturing (3D printing): techniques for polymer material systems. Materials Today Chemistry, 16, article number 100248. doi: 10.1016/j.mtchem.2020.100248
Dasari, B. L. & Naher, S. ORCID: 0000-0003-2047-5807 (2020). Graphene Materials for Batteries. In: Olabi, A-G. (Ed.), Reference Module in Materials Science and Materials Engineering. . Amsterdam, Netherlands: Elsevier. doi: 10.1016/B978-0-12-815732-9.00036-X
De, M., Markides, C., Singh, V. K. , Themistos, C. & Rahman, B. M. ORCID: 0000-0001-6384-0961 (2020). Analysis of a Single Solid Core Flat Fiber Plasmonic Refractive Index Sensor. Plasmonics, 15(5), pp. 1429-1437. doi: 10.1007/s11468-020-01154-2
Deane, S., Avdelidis, N. P., Ibarra-Castanedo, C. , Zhang, H., Yazdani Nezhad, H. ORCID: 0000-0003-0832-3579, Williamson, A. A., Mackley, T., Maldague, X., Tsourdos, A. & Nooralishahi, P. (2020). Comparison of Cooled and Uncooled IR Sensors by Means of Signal-to-Noise Ratio for NDT Diagnostics of Aerospace Grade Composites. Sensors, 20(12), article number 3381. doi: 10.3390/s20123381
Degtyareva, N., Gatheeshgar, P., Poologanathan, K. , Gunalan, S., Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 & Napper, S. (2020). New distortional buckling design rules for slotted perforated cold-formed steel beams. Journal of Constructional Steel Research, 168, article number 106006. doi: 10.1016/j.jcsr.2020.106006
Deng, X-F., Shilin, L., Fu, F. ORCID: 0000-0002-9176-8159 & Qian, K. (2020). Effects of High Strength Concrete on Progressive Collapse Resistance of Reinforced Concrete Frame. Journal of Structural Engineering, 146(6), article number 04020078. doi: 10.1061/(asce)st.1943-541x.0002628
Ding, X., Li, Y., Li, D. , Li, L. ORCID: 0000-0002-4026-0216 & Liu, X. (2020). Using machine-learning approach to distinguish patients with methamphetamine dependence from healthy subjects in a virtual reality environment. Brain and Behavior, 10(11), article number e01814. doi: 10.1002/brb3.1814
Dionysios, S. (2020). Direct numerical simulation of secondary droplet breakup in fuel sprays. (Unpublished Doctoral thesis, City, University of London)
Dissanayake, D. M. M. P., Poologanathan, K., Gunalan, S. , Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979, Nagaratnam, B. & Wanniarachchi, K. (2020). Numerical modelling and shear design rules of stainless steel lipped channel sections. Journal of Constructional Steel Research, 168, article number 105873. doi: 10.1016/j.jcsr.2019.105873
Dixit, A., Asif, W. & Rajarajan, M. ORCID: 0000-0001-5814-9922 (2020). Smart-Contract Enabled Decentralized Identity Management Framework for Industry 4.0. In: IECON 2020 The 46th Annual Conference of the IEEE Industrial Electronics Society. IECON 2020 The 46th Annual Conference of the IEEE Industrial Electronics Society, 19-21 Oct 2020, Online.
Duncan, E. M., Charani, E., Clarkson, J. E. , Francis, J. ORCID: 0000-0001-5784-8895, Gillies, K., Grimshaw, J. M., Kern, W. V., Lorencatto, F., Marwick, C. A., McEwen, J., Moehler, R., Morris, A., Ramsay, C. R., Van Katwyk, S. R., Rzewuska, M., Skodvin, B., Smith, I. K. ORCID: 0000-0003-1524-9880, Suh, K. N. & Davey, P. (2020). A behavioural approach to specifying interventions: what insights can be gained for the reporting and implementation of interventions to reduce antibiotic use in hospitals?. Journal of Antimicrobial Chemotherapy, 75(5), pp. 1338-1346. doi: 10.1093/jac/dkaa001
Eilbigi Dehkordi, B. (2020). System approach to evaluate economic feasibility of renewable generation for rural communities. (Unpublished Doctoral thesis, City, University of London)
El Hajj, C. & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2020). Cuffless and Continuous Blood Pressure Estimation from PPG Signals Using Recurrent Neural Networks. In: 2020 42nd Annual International Conference of the IEEE Engineering in Medicine & Biology Society (EMBC). 42nd Annual International Conference of the IEEE Engineering in Medicine & Biology Society (EMBC), 20-24 Jul 2020, Online. doi: 10.1109/EMBC44109.2020.9175699
El-Hajj, C. & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2020). A review of machine learning techniques in photoplethysmography for the non-invasive cuff-less measurement of blood pressure. Biomedical Signal Processing and Control, 58, article number 101870. doi: 10.1016/j.bspc.2020.101870
Elshalakani, M. O. M. E (2020). Investigation of biomimetic systems and their applications in robotic solutions in fluids: using deep learning and vision-based control. (Unpublished Doctoral thesis, City, University of London)
Elshalakani, M. & Brücker, C. ORCID: 0000-0001-5834-3020 (2020). Simulation of self-coordination in a row of beating flexible flaplets for micro-swimmer applications: Model and experiment study. Journal of Fluids and Structures, 94, article number 102923. doi: 10.1016/j.jfluidstructs.2020.102923
Elshalakani, M., Muthuramalingam, M. & Bruecker, C. ORCID: 0000-0001-5834-3020 (2020). A Deep-Learning Model for Underwater Position Sensing of a Wake's Source Using Artificial Seal Whiskers. Sensors, 20(12), article number 3522. doi: 10.3390/s20123522
Fonseca, J. ORCID: 0000-0002-7654-6005 (2020). Editorial. Environmental Geotechnics, 7(8), pp. 522-523. doi: 10.1680/jenge.2020.7.8.522
Fostiropoulos, S., Strotos, G., Nikolopoulos, N. & Gavaises, M. ORCID: 0000-0003-0874-8534 (2020). Numerical investigation of heavy fuel oil droplet breakup enhancement with water emulsions. Fuel, 278, article number 118381. doi: 10.1016/j.fuel.2020.118381
Fostiropoulos, S., Strotos, G., Nikolopoulos, N. & Gavaises, M. ORCID: 0000-0003-0874-8534 (2020). A simple model for breakup time prediction of Water-Heavy Fuel Oil emulsion droplets. International Journal of Heat and Mass Transfer, 164, article number 120581. doi: 10.1016/j.ijheatmasstransfer.2020.120581
Fostiropoulos, S. R. (2020). Heat transfer and breakup of emulsified fuel droplets. (Unpublished Doctoral thesis, City, University of London)
Fu, F. ORCID: 0000-0002-9176-8159 (2020). Editorial. Proceedings of the Institution of Civil Engineers - Structures and Buildings, 173(11), pp. 781-782. doi: 10.1680/jstbu.2020.173.11.781
Fu, F. ORCID: 0000-0002-9176-8159 (2020). Experimental study on behaviour of shear connectors in moment resistance of steel composite joints. ce/papers, 3(5-6), pp. 244-251. doi: 10.1002/cepa.1199
Fu, F. ORCID: 0000-0002-9176-8159 (2020). Fire induced Progressive Collapse Potential assessment of Steel Framed Buildings using machine learning. Journal of Constructional Steel Research, 166, article number 105918. doi: 10.1016/j.jcsr.2019.105918
Gao, S., Peng, Z., Guo, L. , Fu, F. ORCID: 0000-0002-9176-8159 & Wang, Y. (2020). Compressive behavior of circular concrete-filled steel tubular columns under freeze-thaw cycles. Journal of Constructional Steel Research, 166, article number 105934. doi: 10.1016/j.jcsr.2020.105934
Gatheeshgar, P., Poologanathan, K., Gunalan, S. , Nagaratnam, B., Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 & Ye, J. (2020). Structural behaviour of optimized cold-formed steel beams. Steel Construction, 13(4), pp. 294-304. doi: 10.1002/stco.201900024
Gatheeshgar, P., Poologanathan, K., Gunalan, S. , Shyha, I., Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 & Corradi, M. (2020). Optimal design of cold-formed steel lipped channel beams: Combined bending, shear, and web crippling. Structures, 28, pp. 825-836. doi: 10.1016/j.istruc.2020.09.027
Gatheeshgar, P., Poologanathan, K., Gunalan, S. , Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979, Nagaratnam, B. & Iacovidou, E. (2020). Optimised cold-formed steel beams in modular building applications. Journal of Building Engineering, 32, article number 101607. doi: 10.1016/j.jobe.2020.101607
Ghanem, M. & Chen, T. ORCID: 0000-0001-8037-1685 (2020). Reinforcement learning for efficient network penetration testing. Information, 11(1), article number 6. doi: 10.3390/info11010006
Giaralis, A., Kougioumtzoglou, I. A. & Spanos, P. D. (2020). Special Issue On Response Analysis and Optimization of Dynamic Energy Harvesting Systems Under the Presence of Uncertainties. ASME J. Risk Uncertainty Part B, article number 010301. doi: 10.1115/1.4049201
Gkoktsi, K. & Giaralis, A. ORCID: 0000-0002-2952-1171 (2020). A compressive MUSIC spectral approach for identification of closely-spaced structural natural frequencies and post-earthquake damage detection. Probabilistic Engineering Mechanics, 60, article number 103030. doi: 10.1016/j.probengmech.2020.103030
Godinez, F. A., Mayen-Mondragon, R., Guzman, J. E. V. , Chavez, O., Gavaises, M. ORCID: 0000-0003-0874-8534 & Montoya, R. (2020). Bioinspired snapping-claw apparatus to study hydrodynamic cavitation effects on the corrosion of metallic samples. Review of Scientific Instruments, 91(6), article number 066101. doi: 10.1063/5.0007069
Gomez Santos, E. (2020). Simulation and numerical modelling of three-phase flow in automotive high-pressure fuel injectors. (Unpublished Doctoral thesis, City, University of London)
Gong, J., Yan, S. ORCID: 0000-0001-8968-6616, Ma, Q. ORCID: 0000-0001-5579-6454 & Li, Y. (2020). Added resistance and seakeeping performance of trimarans in oblique waves. Ocean Engineering, 216, article number 107721. doi: 10.1016/j.oceaneng.2020.107721
Gonzalez Garcia, I. & Fu, F. ORCID: 0000-0002-9176-8159 (2020). Form Finding and structural Optimization of Tensile cable dome using Parametric Modelling Tools. Structural Engineering International, 31(2), pp. 271-280. doi: 10.1080/10168664.2020.1750937
Gupta, V., He, W. ORCID: 0000-0002-2633-6114, Wan, M. , Chen, S. & Li, L. K. B. (2020). A Ginzburg-Landau model for linear global modes in open shear flows. Journal of Fluid Mechanics, 904, article number A31. doi: 10.1017/jfm.2020.691
Hao, H., Guo, Z., Ma, Q. ORCID: 0000-0001-5579-6454 & Xu, G. (2020). Air cushion barge platform for offshore wind turbine and its stability at a large range of angle. Ocean Engineering, 217, article number 107886. doi: 10.1016/j.oceaneng.2020.107886
Hasheminejad, S. M., Chong, T. P., Lacagnina, G. , Joseph, P., Kim, J-H., Choi, K-S., Omidyeganeh, M. ORCID: 0000-0002-4140-2810, Pinelli, A. ORCID: 0000-0001-5564-9032 & Stalnov, O. (2020). On the manipulation of flow and acoustic fields of a blunt trailing edge aerofoil by serrated leading edges. The Journal of the Acoustical Society of America, 147(6), pp. 3932-3947. doi: 10.1121/10.0001377
Hassani, V. ORCID: 0000-0001-6724-2520 (2020). An investigation of additive manufacturing technologies for development of end-use components: A case study. International Journal of Pressure Vessels and Piping, 187, article number 104171. doi: 10.1016/j.ijpvp.2020.104171
Hassani, V. ORCID: 0009-0003-0289-2890, Morris, A., Ibrahim, Z. , Abubakar, I., Mehrabi, H. & O’Brien, R. (2020). A Mathematical Model for A Cladding Fastener to Estimate the Maximum Pull-Out Force Capacity. Journal of Physics: Conference Series, 1529(5), article number 052053. doi: 10.1088/1742-6596/1529/5/052053
Hernandez, T. P. A., Mills, A. R. & Yazdani Nezhad, H. ORCID: 0000-0003-0832-3579 (2020). Shear Driven Deformation and Damage Mechanisms in High-performance Carbon Fibre-reinforced Thermoplastic and Toughened Thermoset Composites Subjected to High Strain Loading. Composite Structures, 261, article number 113289. doi: 10.1016/j.compstruct.2020.113289
Hosanee, M., Chan, G., Welykholowa, K. , Cooper, R., Kyriacou, P. A. ORCID: 0000-0002-2868-485X, Zheng, D., Allen, J., Abbott, D., Menon, C., Lovell, N. H., Howard, N., Chan, W-S., Lim, K., Fletcher, R., Ward, R. & Elgendi, M. (2020). Cuffless Single-Site Photoplethysmography for Blood Pressure Monitoring. Journal of Clinical Medicine, 9(3), article number 723. doi: 10.3390/jcm9030723
Hu, Z. Z., Yan, S. ORCID: 0000-0001-8968-6616, Greaves, D. , Mai, T., Raby, A. & Ma, Q. ORCID: 0000-0001-5579-6454 (2020). Investigation of interaction between extreme waves and a moored FPSO using FNPT and CFD solvers. Ocean Engineering, 206, article number 107353. doi: 10.1016/j.oceaneng.2020.107353
Hwang, J., Lukas, W., Karathanassis, I. K. , Koukouvinis, F. ORCID: 0000-0002-3945-3707, Lyle, P. & Scott, S. (2020). Spatio-temporal identification of plume dynamics by 3D computed tomography using Engine Combustion Network Spray G injector and various fuels. Fuel, 280, article number 118359. doi: 10.1016/j.fuel.2020.118359
Ibrahim, Z., ONeill, M., Hassani, V. ORCID: 0009-0003-0289-2890 & Mehrabi, H. (2020). Comparing the Efficiency of Intelligent Hybrid Operator Assistance Software with Intuitive Set-up (OASIS) for Assembly Production Line. Journal of Physics: Conference Series, 1529(4), article number 042106. doi: 10.1088/1742-6596/1529/4/042106
Jin, L-Z., Chen, X., Fu, F. , Deng, X-F. & Qian, K. (2020). Shear Strength of Fiber Reinforced Reactive Powder Concrete I-Shaped Beam without Stirrup. Magazine of Concrete Research, 72(21), pp. 1112-1124. doi: 10.1680/jmacr.18.00525
Karabağ, C. ORCID: 0000-0003-4424-0471 (2020). Volumetric analysis of HeLa cancer cells imaged with serial block face scanning electron microscopy. (Unpublished Doctoral thesis, City, University of London)
Karim, M. R., Al Kayed, N., Hossain, M. R. & Rahman, B. M. ORCID: 0000-0001-6384-0961 (2020). Study of low-peak-power highly coherent broadband supercontinuum generation through a dispersion-engineered Si-rich silicon nitride waveguide. Applied Optics, 59(20), pp. 5948-5956. doi: 10.1364/ao.395705
Karim, M. R., Al Kayed, N. & Rahman, B. M. ORCID: 0000-0001-6384-0961 (2020). Broadband Supercontinuum Generation in Mid-Infrared Range (0.8 µm – 4.5 µm) Using Low Power Dispersion-Engineered CMOS Compatible Silicon-Rich Nitride (SRN) Waveguide. 2020 IEEE Region 10 Symposium (TENSYMP), 2020, pp. 246-249. doi: 10.1109/TENSYMP50017.2020.9230715
Karim, M. R., Ghosh, S. ORCID: 0000-0002-1992-2289, Rahman, M. M. & Rahman, B. M. A. ORCID: 0000-0001-6384-0961 (2020). Modeling of dispersion-engineered all-chalcogenide step-index fiber for wideband supercontinuum generation in the mid-infrared. Optical and Quantum Electronics, 52(5), article number 243. doi: 10.1007/s11082-020-02355-z
Kechagias-Stamatis, O., Aouf, N. ORCID: 0000-0001-9291-4077 & Dubanchet, V. (2020). Evaluating 3D local descriptors and recursive filtering schemes for LIDAR-based uncooperative relative space navigation. Journal of Field Robotics, 37(5), pp. 848-888. doi: 10.1002/rob.21904
Kechagias-Stamatis, O., Aouf, N. ORCID: 0000-0001-9291-4077, Dubanchet, V. & Richardson, M. A. (2020). DeepLO: Multi-projection deep LIDAR odometry for space orbital robotics rendezvous relative navigation. Acta Astronautica, 177, pp. 270-285. doi: 10.1016/j.actaastro.2020.07.034
Kechagias-Stamatis, O., Aouf, N. ORCID: 0000-0001-9291-4077 & Richardson, M. A. (2020). Performance evaluation of single and cross-dimensional feature detection and description. IET Image Processing, 14(10), pp. 2035-2051. doi: 10.1049/iet-ipr.2019.1523
Khaled, A., Hameed, M. F. O., Rahman, B. M. ORCID: 0000-0001-6384-0961 , Grattan, K. T. V. ORCID: 0000-0003-2250-3832, Obayya, S. S. A. & Hussein, M. (2020). Characteristics of silicon nanowire solar cells with a crescent nanohole. Optics Express, 28(21), pp. 31020-31033. doi: 10.1364/oe.397051
Khojasteh, H., Noorollahi, Y., Tahani, M. & Masdari, M. ORCID: 0000-0002-1159-2406 (2020). Optimization of Power and Levelized Cost for Shrouded Small Wind Turbine. Inventions, 5(4), article number 59. doi: 10.3390/inventions5040059
Koornneef, H., Verhagen, W. J. C. & Curran, R. ORCID: 0009-0008-4349-4449 (2020). A decision support framework and prototype for aircraft dispatch assessment. Decision Support Systems, 135, article number 113338. doi: 10.1016/j.dss.2020.113338
Koukouvinis, F. ORCID: 0000-0002-3945-3707, Vidal-Roncero, A., Rodriguez, C. , Gavaises, M. ORCID: 0000-0003-0874-8534 & Pickett, L. (2020). Enhancing the Predictive Capabilities for High P/T Fuel Sprays; Non-Ideal Thermodynamic Modelling Using PC-SAFT. Ercoftac Series, 124,
Koukouvinis, P. ORCID: 0000-0002-3945-3707, Vidal-Roncero, A. ORCID: 0000-0001-8177-518X, Rodriguez, C. , Gavaises, M. ORCID: 0000-0003-0874-8534 & Pickett, L. (2020). High pressure/high temperature multiphase simulations of dodecane injection to nitrogen: Application on ECN Spray-A. Fuel, 275, article number 117871. doi: 10.1016/j.fuel.2020.117871
Kumar, A., Ghobadian, A. & Nouri, J. M. ORCID: 0000-0001-8610-3737 (2020). Assessment of Cavitation Models for Compressible Flows Inside a Nozzle. Fluids, 5(3), article number 134. doi: 10.3390/fluids5030134
Kumar, N. (2020). Non-Newtonian coupled field analysis of blood flow in normal and stenosed carotid artery with varying haemodynamic parameters. (Unpublished Doctoral thesis, City, University of London)
Kumar, N., Abdul Khader, S. M., Pai, R. B. , Kyriacou, P. A. ORCID: 0000-0002-2868-485X, Khan, S. ORCID: 0000-0001-5589-6914, Prakashini, K. & Srikanth Rao, D. (2020). Effect of Newtonian and non-Newtonian flow in subject specific carotid artery. Journal of Engineering Science and Technology, 15(4), pp. 2746-2763.
Kumar, N., Khader, S. M. Abdul, Pai, R. , Khan, S. H. ORCID: 0000-0001-5589-6914 & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2020). Fluid structure interaction study of stenosed carotid artery considering the effects of blood pressure. International Journal of Engineering Science, 154, article number 103341. doi: 10.1016/j.ijengsci.2020.103341
Kumar, R., Binetti, L., Nguyen, T.H. , Alwis, L. S. M., Sun, T. ORCID: 0000-0003-3861-8933 & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2020). Optical fibre thermometry using ratiometric green emission of an upconverting nanoparticle-polydimethylsiloxane composite. Sensors and Actuators A: Physical, 312, article number 112083. doi: 10.1016/j.sna.2020.112083
Lalicata, L. M., Rotisciani, G. M., Desideri, A. , Casini, F. & Thorel, L. (2020). Physical modelling of piles under lateral loading in unsaturated soils. E3S Web of Conferences, 195(01021), doi: 10.1051/e3sconf/202019501021
Lamine, D., Djamal, H., Oussama, T. , Ayoub, A. ORCID: 0000-0002-2670-9662 & Khechai, A. (2020). Effect of boundary conditions and geometry on the failure of cylindrical shell structures. Engineering Solid Mechanics, 8(4), pp. 313-322. doi: 10.5267/j.esm.2020.4.001
Laria, D (2020). Techno-economic assessment of a solar dish micro gas turbne system. (Unpublished Doctoral thesis, City, University of London)
Leandrou, S., Lamnisos, D., Kyriacou, P. A. ORCID: 0000-0002-2868-485X , Constanti, S. & Pattichis, C. S. (2020). Comparison of 1.5 T and 3 T MRI hippocampus texture features in the assessment of Alzheimer's disease. Biomedical Signal Processing and Control, 62, article number 102098. doi: 10.1016/j.bspc.2020.102098
Leandrou, S., Lamnisos, D., Mamais, I. , Kyriacou, P. A. ORCID: 0000-0002-2868-485X, Pattichis, C. S. & Alzheimer’s Disease and Neuroimaging Initiative (2020). Assessment of Alzheimer's Disease Based on Texture Analysis of the Entorhinal Cortex. Frontiers in Aging Neuroscience, 12, article number 176. doi: 10.3389/fnagi.2020.00176
Lei, X., Dong, X., Lu, C. , Sun, T. ORCID: 0000-0003-3861-8933 & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2020). Underwater Pressure and Temperature Sensor Based on a Special Dual-Mode Optical Fiber. IEEE Access, 8, pp. 146463-146471. doi: 10.1109/access.2020.3015195
Leonti, A., Fonseca, J. ORCID: 0000-0002-7654-6005, Valova, I. , Beemer, R., Cannistraro, D., Pilskaln, C., DeFlorio, D. & Kelly, G. (2020). Optimized 3D Segmentation Algorithm for Shelly Sand Images. In: Proceedings of the 6th World Congress on Electrical Engineering and Computer Systems and Science. 6th World Congress on Electrical Engineering and Computer Systems and Science (EECSS'20), 13-15 Aug 2020, Virtual Conference. doi: 10.11159/cist20.107
Li, Q. (2020). Experimental study of flow pulse interacting with walls. (Unpublished Doctoral thesis, City, University of London)
Li, L., Gu, N., Dong, H. , Li, B. & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2020). Analysis of the effects of acoustic levitation to simulate the microgravity environment on the development of early zebrafish embryos. RSC Advances, 10(72), pp. 44593-44600. doi: 10.1039/d0ra07344j
Li, Q. & Bruecker, C. ORCID: 0000-0001-5834-3020 (2020). Sediment erosion in flexible canopies by vortex impact. Journal of Fluids and Structures, 97, article number 103058. doi: 10.1016/j.jfluidstructs.2020.103058
Li, Y., Lu, J., Yan, S. ORCID: 0000-0001-8968-6616 & Ma, Q. ORCID: 0000-0001-5579-6454 (2020). Numerical simulation of focusing wave interaction with fixed cylinder using qalefoam. Proceedings of the International Offshore and Polar Engineering Conference, 2020, pp. 2330-2337.
Lijian, W., Liu, F., Zhao, B. , Ning, Y., Zhang, L., Bradley, R. H. & Wu, W. ORCID: 0000-0003-1462-6402 (2020). Carbon Nano Bowls Filled with MoS2 Nanosheets as Electrode Materials for Supercapacitors. ACS Applied Nano Materials, 3(7), pp. 6448-6459. doi: 10.1021/acsanm.0c00924
Limantseva, O., Halikias, G. ORCID: 0000-0003-1260-1383 & Karcanias, N. ORCID: 0000-0002-1889-6314 (2020). Nearest common root of a set of polynomials: A structured singular value approach. Linear Algebra and its Applications, 584, pp. 233-256. doi: 10.1016/j.laa.2019.09.005
Limantseva, O. ORCID: 0000-0003-2764-4415, Halikias, G. ORCID: 0000-0003-1260-1383 & Karcanias, N. (2020). An alternating projection algorithm for the “approximate” GCD calculation. In: IFAC-PapersOnLine. 21st IFAC World Congress, 11-17 Jul 2020, Berlin, Germany. doi: 10.1016/j.ifacol.2020.12.1630
Liu, D., Liu, X., Fu, F. ORCID: 0000-0002-9176-8159 & Wang, W. (2020). Nondestructive Post-fire Damage Assessment of Structural Steel Members using Leeb Harness method. Fire Technology, 56(4), pp. 1777-1799. doi: 10.1007/s10694-020-00954-6
Liu, F., Feng, R., Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 & Yan, G. (2020). Designing efficient grid structures considering structural imperfection sensitivity. Engineering Structures, 204, article number 109910. doi: 10.1016/j.engstruct.2019.109910
Liu, F., Wang, L., Bradley, R. , Zhao, B. & Wu, W. ORCID: 0000-0003-1462-6402 (2020). Graphene–Carbon Composites for Solar and Low‐Voltage Powered Efficient Interfacial Evaporation. Advanced Sustainable Systems, 4(3), article number 1900122. doi: 10.1002/adsu.201900122
Liu, X., Sun, C., Banerjee, R. , Dan, H-C. & Chang, L. (2020). An exact dynamic stiffness method for multibody systems consisting of beams and rigid-bodies. Mechanical Systems and Signal Processing, 150, article number 107264. doi: 10.1016/j.ymssp.2020.107264
Lu, W., D'Mello, C. ORCID: 0000-0002-5726-6868 & Ayoub, A. ORCID: 0000-0002-2670-9662 (2020). Coupled thermo-mechanical damage modelling for structural steel in fire conditions. Journal of Structural Engineering, 146(7), article number 04020127. doi: 10.1061/(asce)st.1943-541x.0002652
Mahmoud, M., Ramadan, M., Naher, S. ORCID: 0000-0003-2047-5807 , Pullen, K. R. ORCID: 0000-0001-8501-9226, Baroutaji, A. & Olabi, A-G. (2020). Recent advances in district energy systems: A review. Thermal Science and Engineering Progress, 20, article number 100678. doi: 10.1016/j.tsep.2020.100678
Mahmoud, M., Ramadan, M., Naher, S. ORCID: 0000-0003-2047-5807 , Pullen, K. R. ORCID: 0000-0001-8501-9226 & Olabi, A-G. (2020). The impacts of different heating systems on the environment: A review. Science of The Total Environment, 766, article number 142625. doi: 10.1016/j.scitotenv.2020.142625
Mahmoud, M., Ramadan, M., Olabi, A-G. , Pullen, K. R. ORCID: 0000-0001-8501-9226 & Naher, S. ORCID: 0000-0003-2047-5807 (2020). A review of mechanical energy storage systems combined with wind and solar applications. Energy Conversion and Management, 210, article number 112670. doi: 10.1016/j.enconman.2020.112670
Mamouei, M., Qassem, M. ORCID: 0000-0003-0730-3189, Razban, M. & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2020). Measurement of dermal water content using a multi-wavelength optical sensor. In: 2020 42nd Annual International Conference of the IEEE Engineering in Medicine & Biology Society (EMBC). doi: 10.1109/EMBC44109.2020.9176619
Mamouei, M. H., Budidha, K. ORCID: 0000-0002-6329-8399, Baishya, N. ORCID: 0000-0002-2231-6132 , Qassem, M. & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2020). Comparison of wavelength selection methods for in-vitro estimation of lactate: a new unconstrained, genetic algorithm-based wavelength selection. Scientific Reports, 10(1), article number 16905. doi: 10.1038/s41598-020-73406-4
Mamouei, M. H., Budidha, K. ORCID: 0000-0002-6329-8399, Baishya, N. ORCID: 0000-0002-2231-6132 , Qassem, M. ORCID: 0000-0003-0730-3189 & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2020). The efficacy of support vector machines in modelling deviations from the Beer-Lambert law for optical measurement of lactate. In: 2020 42nd Annual International Conference of the IEEE Engineering in Medicine & Biology Society (EMBC). 42nd Annual International Conference of the IEEE Engineering in Medicine & Biology Society (EMBC), 20-24 Jul 2020, Online. doi: 10.1109/EMBC44109.2020.9175215
Manolesos, M. ORCID: 0000-0002-5506-6061, Papadakis, G. & Voutsinas, S. G. (2020). Revisiting the assumptions and implementation details of the BAY model for vortex generator flows. Renewable Energy, 146, pp. 1249-1261. doi: 10.1016/j.renene.2019.07.063
Maraveas, C. & Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 (2020). Strengthening Techniques for Greenhouses. AgriEngineering, 2(1), pp. 37-54. doi: 10.3390/agriengineering2010003
Martinez, D., Morar, N. ORCID: 0000-0001-9109-8864, Khotari, M. & Gray, S. (2020). Investigation into the Effects of Salt Chemistry and SO2 on the Crack Initiation of CMSX-4 in Static Loading Conditions. In: Superalloys 2020. 14th International Symposium on Superalloys, 13-16 Sep 2021, Virtual. doi: 10.1007/978-3-030-51834-9_73
Massart, P. F. R., Dhanisetty, V. S. V., Kassapoglou, C. , Verhagen, W. J. C. W. & Curran, R. ORCID: 0009-0008-4349-4449 (2020). Deducing the physical characteristics of an impactor from the resultant damage on aircraft structures. International Journal of Solids and Structures, 200-20, pp. 94-105. doi: 10.1016/j.ijsolstr.2020.05.017
Mejía-Mejía, E. ORCID: 0000-0002-5357-4329, Budidha, K. ORCID: 0000-0002-6329-8399, Abay, T. Y. , May, J.M. ORCID: 0000-0002-8659-756X & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2020). Heart Rate Variability (HRV) and Pulse Rate Variability (PRV) for the Assessment of Autonomic Responses. Frontiers and Physiology, 11, pp. 1-17. doi: 10.3389/fphys.2020.00779
Mejía-Mejía, E. ORCID: 0000-0002-5357-4329, Budidha, K. ORCID: 0000-0002-6329-8399, Abay, T. Y. , May, J.M. ORCID: 0000-0002-8659-756X & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2020). Heart Rate Variability and Multi-Site Pulse Rate Variability for the Assessment of Autonomic Responses to Whole-Body Cold Exposure. In: 2020 42nd Annual International Conference of the IEEE Engineering in Medicine & Biology Society (EMBC). doi: 10.1109/EMBC44109.2020.9175856
Mejía-Mejía, E. ORCID: 0000-0002-5357-4329, May, J.M. ORCID: 0000-0002-8659-756X, Torres, R. & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2020). Pulse rate variability in cardiovascular health: a review on its applications and relationship with heart rate variability. Physiological Measurement, 41(7), article number 07TR01. doi: 10.1088/1361-6579/ab998c
Meng, J., Dai, K., Zhao, Z. , Mao, Z., Camara, A. ORCID: 0000-0002-1675-2640, Zhang, S. & Mei, Z. (2020). Study on the aerodynamic damping for the seismic analysis of wind turbines in operation. Renewable Energy, 159, pp. 1224-1242. doi: 10.1016/j.renene.2020.05.181
Mergos, P.E. ORCID: 0000-0003-3817-9520 & Mantoglou, F. (2020). Optimum design of reinforced concrete retaining walls with the flower pollination algorithm. Structural and Multidisciplinary Optimization, 61(2), pp. 575-585. doi: 10.1007/s00158-019-02380-x
Miah, S., Milonidis, E., Kaparias, I. & Karcanias, N. ORCID: 0000-0002-1889-6314 (2020). An Innovative Multi-Sensor Fusion Algorithm to Enhance Positioning Accuracy of an Instrumented Bicycle. IEEE Transactions on Intelligent Transportation Systems, 21(3), pp. 1145-1153. doi: 10.1109/tits.2019.2902797
Mirshahi, M. (2020). In-nozzle flow spray characteristics in gasoline multi-hole injectors. (Unpublished Doctoral thesis, City, University of London)
Monti, A., Omidyeganeh, M. ORCID: 0000-0002-4140-2810, Eckhardt, B. & Pinelli, A. ORCID: 0000-0001-5564-9032 (2020). On the genesis of different regimes in canopy flows: a numerical investigation. Journal of Fluid Mechanics, 891, 891-. doi: 10.1017/jfm.2020.155
Murali-Girija, M. (2020). Numerical simulation of cavitation in the presence of non-condensable gas using a three-phase model. (Unpublished Doctoral thesis, City, University of London)
Muthuramalingam, M. (2020). Investigation of biomimetic fish scale arrays and leading-edge serrations on base flow modification for transition delay. (Unpublished Doctoral thesis, City, University of London)
Muthuramalingam, M., Puckert, D. K., Rist, U. & Bruecker, C. ORCID: 0000-0001-5834-3020 (2020). Transition Delay Using Biomimetic Fish Scale Arrays. Scientific Reports, 10(1), pp. 1-13. doi: 10.1038/s41598-020-71434-8
Muthuramalingam, M., Talboys, E. ORCID: 0000-0001-8993-0180, Wagner, H. & Bruecker, C. ORCID: 0000-0001-5834-3020 (2020). Flow turning effect and laminar control by the 3D curvature of leading edge serrations from owl wing. Bioinspiration and Biomimetics, 16(2), article number 026010. doi: 10.1088/1748-3190/abc6b4
Narayana, K. J., Burela, R. G., Ponnusami, S. A. ORCID: 0000-0002-2143-8971 & Harursampath, D. (2020). Geometric nonlinear analysis of composite stiffened panels using variational asymptotic method. AIAA Journal, 58(9), pp. 4189-4203. doi: 10.2514/1.j058963
Nazeer, Y. H. (2020). Numerical modelling of in-nozzle flow transient effects and fuel atomization characteristics of an industrial atomizer. (Unpublished Doctoral thesis, City, University of London)
Nguyen, T.H., Sun, T. ORCID: 0000-0003-3861-8933 & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2020). Novel coumarin-based pH sensitive fluorescent probes for the highly alkaline pH region. Dyes and Pigments, 177, article number 108312. doi: 10.1016/j.dyepig.2020.108312
Nomoni, M., May, J. M. ORCID: 0000-0002-8659-756X & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2020). Novel Polydimethylsiloxane (PDMS) Pulsatile Vascular Tissue Phantoms for the In-Vitro Investigation of Light Tissue Interaction in Photoplethysmography. SENSORS, 20(15), article number 4246. doi: 10.3390/s20154246
Nomoni, M., May, J.M. ORCID: 0000-0002-8659-756X & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2020). Fabricating Novel PDMS Vessels for Phantoms in Photoplethysmography Investigations. In: 2020 42nd Annual International Conference of the IEEE Engineering in Medicine & Biology Society (EMBC). doi: 10.1109/EMBC44109.2020.9176476
Nykteri, G., Koukouvinis, P. ORCID: 0000-0002-3945-3707, Avila, S. R. G. , Ohl, C-D. & Gavaises, M. ORCID: 0000-0003-0874-8534 (2020). A Σ-ϒ two-fluid model with dynamic local topology detection: Application to high-speed droplet impact. Journal of Computational Physics, 408, article number 109225. doi: 10.1016/j.jcp.2019.109225
Olabi, A. G., Mahmoud, M., Soudan, B. , Wilberforce, T. & Ramadan, M. (2020). Geothermal based hybrid energy systems, toward eco-friendly energy approaches. Renewable Energy, 147, pp. 2003-2012. doi: 10.1016/j.renene.2019.09.140
Panchal, J. P., McNamara, A. M. ORCID: 0000-0002-3452-0800 & Goodey, R.J. ORCID: 0000-0002-9166-8393 (2020). Sheet pile groups as an alternative foundation solution to cast in-situ concrete piles. International Journal of Physical Modelling in Geotechnics, 20(2), pp. 83-96. doi: 10.1680/jphmg.18.00053
Papadakis, G. & Manolesos, M. ORCID: 0000-0002-5506-6061 (2020). The flow past a flatback airfoil with flow control devices: Benchmarking numerical simulations against wind tunnel data. Wind Energy Science, 5(3), pp. 911-927. doi: 10.5194/wes-5-911-2020
Papadakis, G., Manolesos, M. ORCID: 0000-0002-5506-6061, Diakakis, K. & Riziotis, V. A. (2020). DES vs RANS: The flatback airfoil case. Journal of Physics: Conference Series, 1618(5), article number 052062. doi: 10.1088/1742-6596/1618/5/052062
Papoutsakis, A. ORCID: 0000-0002-5449-5921 & Gavaises, M. ORCID: 0000-0003-0874-8534 (2020). A model for the investigation of the second-order structure of caustic formations in dispersed flows. Journal of Fluid Mechanics, 892, article number A4. doi: 10.1017/jfm.2020.176
Papoutsakis, A. ORCID: 0000-0002-5449-5921, Koukouvinis, P. ORCID: 0000-0002-3945-3707 & Gavaises, M. ORCID: 0000-0003-0874-8534 (2020). Solution of cavitating compressible flows using Discontinuous Galerkin discretisation. Journal of Computational Physics, 410, article number 109377. doi: 10.1016/j.jcp.2020.109377
Petrini, F., Giaralis, A. ORCID: 0000-0002-2952-1171 & Wang, Z. (2020). Optimal tuned mass-damper-inerter (TMDI) design in wind-excited tall buildings for occupants’ comfort serviceability performance and energy harvesting. Engineering Structures, 204, article number 109904. doi: 10.1016/j.engstruct.2019.109904
Pietrosanti, D., De Angelis, M. & Giaralis, A. ORCID: 0000-0002-2952-1171 (2020). Experimental study and numerical modeling of nonlinear dynamic response of SDOF system equipped with tuned mass damper inerter (TMDI) tested on shaking table under harmonic excitation. International Journal of Mechanical Sciences, 184, article number 105762. doi: 10.1016/j.ijmecsci.2020.105762
Pietrosanti, D., De Angelis, M. & Giaralis, A. ORCID: 0000-0002-2952-1171 (2020). Shake table testing of a tuned mass damper inerter (Tmdi)-equipped structure and nonlinear dynamic modeling under harmonic excitations. In: Proceedings of XXIV AIMETA Conference 2019. (pp. 1512-1521). Cham, Switzerland: Springer. doi: 10.1007/978-3-030-41057-5_122
Qaban, A. ORCID: 0000-0003-2982-8429, Mohmed, T., Quazi, M. M. & Naher, S. ORCID: 0000-0003-2047-5807 (2020). The effect of Al and Nb contents, cooling rate and rolling condition on the microstructure and corrosion behaviour of HSLA steel. Materials Today Communications, 25, article number 101362. doi: 10.1016/j.mtcomm.2020.101362
Qian, K., Liang, S-L., Xiong, X-Y. , Fu, F. ORCID: 0000-0002-9176-8159 & Fang, Q. (2020). Quasi-Static and Dynamic Behavior of Precast Concrete Frames with High Performance Dry Connections subjected to Loss of a Penultimate Column Scenario. Engineering Structures, 205, article number 110115. doi: 10.1016/j.engstruct.2019.110115
Qian, K., Hu, H., Fu, F. ORCID: 0000-0002-9176-8159 & Deng, X. (2020). Dynamic Behavior of Precast Concrete Beam-Column Sub-Assemblages with High Performance Connections Subjected to Sudden Column Removal Scenario. In: Soules, J. G. (Ed.), Structures Congress 2020. (pp. 467-474). Virginia, USA: ASCE.
Qian, K., Lan, D., Fu, F. ORCID: 0000-0002-9176-8159 & Li, B. (2020). Effects of Infilled Wall Opening on Load Resisting Capacity of RC Frames to Mitigate Progressive Collapse Risk. Engineering Structures, 223, article number 111196. doi: 10.1016/j.engstruct.2020.111196
Qian, K., Lan, X., Li, Z. , Li, Y. & Fu, F. ORCID: 0000-0002-9176-8159 (2020). Progressive Collapse Resistance of Two-Storey Seismic Configured Steel Sub-Frames Using Welded Connections. Journal of Constructional Steel Research, 170, article number 106117. doi: 10.1016/j.jcsr.2020.106117
Qian, K., Liang, S-L., Feng, D-C. , Fu, F. ORCID: 0000-0002-9176-8159 & Wu, G. (2020). Experimental and Numerical Investigation on Progressive Collapse Resistance of Post-tensioned Precast Concrete Beam-Column Sub-assemblages. Journal of Structural Engineering, 146(9), article number 04020170. doi: 10.1061/(asce)st.1943-541x.0002714
Qian, K., Weng, Y., Fu, F. ORCID: 0000-0002-9176-8159 & Deng, X. (2020). Numerical Evaluation of the Reliability of Using Single-Story Substructures to Study Progressive Collapse Behaviour of Multi-Story RC Frames. Journal of Building Engineering, 33, article number 101636. doi: 10.1016/j.jobe.2020.101636
Rajana, K., Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 & Koltsakis, E. (2020). Elastic and inelastic buckling of steel cellular beams under strong-axis bending. Thin-Walled Structures, 156, article number 106955. doi: 10.1016/j.tws.2020.106955
Ransley, E., Yan, S. ORCID: 0000-0001-8968-6616, Brown, S. , Hann, M., Graham, D., Windt, C., Schmitt, P., Davidson, J.W., Ringwood, J., Musiedlak, P-H., Wang, J., Wang, J., Ma, Q. ORCID: 0000-0001-5579-6454, Xie, Z., Zhang, N., Zheng, X., Giorgi, G., Chen, H., Lin, Z., Qian, L., Ma, Z., Bai, W., Chen, Q., Zang, J., Ding, H., Cheng, L., Zheng, J., Gu, H., Gong, X., Liu, Z., Zhuang, Y., Wan, D., Bingham, H. & Greaves, D. (2020). A Blind Comparative Study of Focused Wave Interactions with Floating Structures (CCP-WSI Blind Test Series 3). International Journal of Offshore and Polar Engineering, 30(1), pp. 1-10. doi: 10.17736/ijope.2020.jc774
Ransley, E. J., Brown, S. A., Hann, M. , Greaves, D., Windt, C., Ringwood, J., Davidson, J. W., Schmitt, P., Yan, S. ORCID: 0000-0001-8968-6616, Wang, J., Wang, J., Ma, Q.W., Xie, Z., Giorgi, G., Hughes, J., Williams, A., Masters, I., Lin, Z., Chen, H., Qian, L., Ma, Z., Chen, Q., Ding, H., Zang, J., Van Rij, J., Yu, Y-H., Li, Z., Bouscasse, B., Ducrozet, G. & Bingham, H. (2020). Focused wave interactions with floating structures: A blind comparative study. Proceedings of the Institution of Civil Engineers, 174(1), pp. 46-61. doi: 10.1680/jencm.20.00006
Read, M. G. ORCID: 0000-0002-7753-2457, Smith, I. K. & Stosic, N. ORCID: 0000-0001-8034-4046 (2020). Influence of rotor geometry on tip leakage and port flow areas in gerotor-type twin screw compressors. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 236(1), pp. 94-102. doi: 10.1177/0954408920962412
Read, M. G. ORCID: 0000-0002-7753-2457, Stosic, N. & Smith, I. K. (2020). The influence of rotor geometry on power transfer between rotors in gerotor-type screw compressors. Journal of Mechanical Design, 142(7), pp. 1-11. doi: 10.1115/1.4045508
Rente, B., Fabian, M., Chen, Y. , Vorreiter, L., Bustamante, H., Sun, T. & Grattan, K. T. V. (2020). In-sewer field-evaluation of an optical fibre-based condition monitoring system. IEEE Sensors Journal, 20(6), pp. 2976-2981. doi: 10.1109/jsen.2019.2956826
Richards, S. & Al Zaili, J. ORCID: 0000-0003-4072-2107 (2020). Contribution of encouraging the future use of biomethane to resolving sustainability and energy security challenges: The case of the UK. Energy for Sustainable Development, 55, pp. 48-55. doi: 10.1016/j.esd.2019.12.003
Riley, P. H. ORCID: 0000-0002-1580-7689, Pullen, K. R. ORCID: 0000-0001-8501-9226, Dordevic, O. , DeLilo, L. & De Giorgio, M. (2020). A Qualitative Assessment of a Modified Multilevel Converter Topology M2LeC for Lightweight Low-cost Electric Propulsion. Engineering, 12(07), pp. 496-515. doi: 10.4236/eng.2020.127035
Ritchie, E. P., Lalicata, L., Divall, S. ORCID: 0000-0001-9212-5115 & Goodey, R.J. ORCID: 0000-0002-9166-8393 (2020). Tests of varied sample preparation methods for centrifuge modelling. In: 4th European Conference Physical Modelling in Geotechnics. 4th European Conference on Physical Modelling in Geotechnics - ECPMG 2020, 6-8 Sep 2020, Lulea, Sweden.
Rokni, H. B., Moore, J. D. & Gavaises, E. (2020). Entropy-scaling based pseudo-component viscosity and thermal conductivity models for hydrocarbon mixtures and fuels containing iso-alkanes and two-ring saturates. Fuel, 283, article number 118877. doi: 10.1016/j.fuel.2020.118877
Roldan, M., Abay, T. Y. & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2020). Non-invasive techniques for multimodal monitoring in Traumatic Brain Injury (TBI): systematic review and meta-analysis. Journal of Neurotrauma, 37(23), pp. 2445-2453. doi: 10.1089/neu.2020.7266
Roncero, A. V. (2020). Numerical modelling of multiphase diesel fuel properties using the PC-SAFT equation of state and its effect on nozzle flow and cavtation under extreme pressurisation. (Unpublished Doctoral thesis, City, University of London)
Rondao, D. ORCID: 0000-0001-9438-0267, Aouf, N. ORCID: 0000-0001-9291-4077, Richardson, M. A. & Dubois-Matra, O. (2020). Benchmarking of local feature detectors and descriptors for multispectral relative navigation in space. Acta Astronautica, 172, pp. 100-122. doi: 10.1016/j.actaastro.2020.03.049
Rotisciani, G. M., Lalicata, L. M., Desideri, A. & Casini, F. (2020). Numerical modelling of the response of an unsaturated silty soil under wetting and gravitational loading processes. E3S Web of Conferences, 195(02012), doi: 10.1051/e3sconf/202019502012
Rowane, A. J., Gupta, A., Gavaises, M. ORCID: 0000-0003-0874-8534 & McHugh, M. A. (2020). Experimental and modeling investigations of the phase behavior and densities of diesel plus nitrogen mixtures. Fuel, 265, article number 117027. doi: 10.1016/j.fuel.2020.117027
Rowane, A. J., Mallepally, R. R., Gavaises, M. ORCID: 0000-0003-0874-8534 & McHugh, M. A. (2020). Interfacial tension of isomers n-hexadecane and 2,2,4,4,6,8,8-heptamethylnonane at high pressures and temperatures. Industrial & Engineering Chemistry Research, 59(19), pp. 9293-9299. doi: 10.1021/acs.iecr.0c00213
Roy, R. ORCID: 0000-0001-5491-7437 & Brooks, S. J. ORCID: 0000-0002-5712-7358 (2020). Self-engineering – Technological Challenges. In: Karabegovic, I. (Ed.), New Technologies, Development and Application III (Lecture Notes in Networks and Systems). (pp. 16-30). Cham, Switzerland: Springer. doi: 10.1007/978-3-030-46817-0_2
Rozada, S., Apostolopoulou, D. ORCID: 0000-0002-9012-9910 & Alonso, E. ORCID: 0000-0002-3306-695X (2020). Load Frequency Control: A Deep Multi-Agent Reinforcement Learning Approach. In: 2020 IEEE Power & Energy Society General Meeting (PESGM). 2020 IEEE PES General Meeting, 2-6 Aug 2020, Montreal, Canada. doi: 10.1109/PESGM41954.2020.9281614
Salah, S., Khader, M. A., White, M. T. ORCID: 0000-0002-7744-1993 & Sayma, A. I. ORCID: 0000-0003-2315-0004 (2020). Mean-Line Design of a Supercritical CO2 Micro Axial Turbine. Applied Sciences, 10(15), article number 5069. doi: 10.3390/app10155069
Salman, F., Cui, Y., Zafar, I. , Liu, F., Wang, L. & Wu, W. ORCID: 0000-0003-1462-6402 (2020). A Wireless-controlled 3D printed Robotic Hand Motion System with Flex Force Sensors. Sensors and Actuators A: Physical, 309, article number 112004. doi: 10.1016/j.sna.2020.112004
Sharma, B., Thakur, S., Trache, D. , Yazdani Nezhad, H. ORCID: 0000-0003-0832-3579 & Thakur, V. K. (2020). Microwave-Assisted Rapid Synthesis of Reduced Graphene Oxide-Based Gum Tragacanth Hydrogel Nanocomposite for Heavy Metal Ions Adsorption. Nanomaterials, 10(8), article number 1616. doi: 10.3390/nano10081616
Siaudinyte, L., Juška, V., Dumbrava, V. , Pagodinas, D., Bručas, D., Rybokas, M., Grattan, K. T. V. ORCID: 0000-0003-2250-3832 & Krikštaponis, B. (2020). Measurement and determination of encoder disc surface parameters in x-z planes using a conventional optical disc reading head. Measurement: Journal of the International Measurement Confederation, 152, article number 107299. doi: 10.1016/j.measurement.2019.107299
Smith-Creasey, M. (2020). Continuous authentication on mobile devices. (Unpublished Doctoral thesis, City, University of London)
Solís-Lemus, J., Sánchez-Sánchez, B. J., Marcotti, S. , Burki, M., Stramer, B. & Reyes-Aldasoro, C. C. ORCID: 0000-0002-9466-2018 (2020). Comparison of Interactions Between Control and Mutant Macrophages. In: Zheng, Y., Williams, B. M. & Chen, K. (Eds.), Medical Image Understanding and Analysis (MIUA 2019). MIUA: Annual Conference on Medical Image Understanding and Analysis, 24-26 July 2019, Liverpool, UK. doi: 10.1007/978-3-030-39343-4_40
Song, G., Cheng, J. & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2020). Recognition of Microseismic and Blasting Signals in Mines Based on Convolutional Neural Network and Stockwell Transform. IEEE Access, 8, pp. 45523-45530. doi: 10.1109/access.2020.2978392
Soto-Valle, R., Alber, J., Manolesos, M. ORCID: 0000-0002-5506-6061 , Nayeri, C. N. & Paschereit, C. O. (2020). Wind Turbine Tip Vortices under the influence of Wind Tunnel Blockage Effects. In: Journal of Physics: Conference Series. The Science of Making Torque from Wind (TORQUE 2020), 28 Sep - 2 Oct 2020, The Netherlands (online). doi: 10.1088/1742-6596/1618/3/032045
Soto-Valle, R., Bartholomay, S., Alber, J. , Manolesos, M. ORCID: 0000-0002-5506-6061, Nayeri, C. N. & Paschereit, C. O. (2020). Determination of the angle of attack on a research wind turbine rotor blade using surface pressure measurements. Wind Energy Science, 5(4), pp. 1771-1792. doi: 10.5194/wes-5-1771-2020
Stavropoulos-Vasilakis, E. (2020). Immersed boundary method for cavitating and biological flows. (Unpublished Doctoral thesis, City, University of London)
Suardi, C., Pinelli, A. ORCID: 0000-0001-5564-9032 & Omidyeganeh, M. ORCID: 0000-0002-4140-2810 (2020). The Effect of the Sweep Angle to the Turbulent Flow Past an Infinite Wing. In: García-Villalba, M., Kuerten, H. & Salvetti, M. (Eds.), Direct and Large Eddy Simulation XII. DLES 2019. (ERCOFTAC Series). (pp. 321-327). Cham, Switzerland: Springer. doi: 10.1007/978-3-030-42822-8_42
Suardi, C. A. (2020). Separating flows around swept and unswept wings with laminar and turbulent free stream conditions. (Unpublished Doctoral thesis, City, University of London)
Sun, F-J., Pang, S-H., Zhang, Z-W. , Fu, F. ORCID: 0000-0002-9176-8159 & Qian, K. (2020). Retrofitting Seismically Damaged Steel sections encased Concrete Composite Walls using Externally Bonded CFRP Strips. Composite Structures, 236, article number 111927. doi: 10.1016/j.compstruct.2020.111927
Sun, S., Singh, G., Kovacevic, A. ORCID: 0000-0002-8732-2242 & Bruecker, C. ORCID: 0000-0001-5834-3020 (2020). Experimental and numerical investigation of tip leakage flows in a roots blower. Designs, 4(1), article number 3. doi: 10.3390/designs4010003
Sun, Z. ORCID: 0000-0002-3862-7939, Gan, T. & Wu, Y. (2020). Shock-Wave/Boundary-Layer Interactions at Compression Ramps Studied by High-Speed Schlieren. AIAA Journal, 58(4), pp. 1681-1688. doi: 10.2514/1.j058257
Sun, Z., Miao, X. & Jagadeesh, C. ORCID: 0000-0002-3862-7939 (2020). Experimental investigation of the transonic shock-wave/boundary-layer interaction over a shock-generation bump. Physics of Fluids, 32(10), 106102-1-106102-11. doi: 10.1063/5.0018763
Thomaidis, I. M. (2020). Analytical and numerical investigation of the seismic behaviour of bridges with rocking piers. (Unpublished Doctoral thesis, City, University of London)
Thomaidis, I. M., Kappos, A. J. ORCID: 0000-0002-5566-5021 & Camara, A. ORCID: 0000-0002-1675-2640 (2020). Dynamics and seismic performance of rocking bridges accounting for the abutment-backfill contribution. Earthquake Engineering and Structural Dynamics, 49(12), pp. 1161-1179. doi: 10.1002/eqe.3283
Thuy Dung, V. (2020). Neural networks and Monte Carlo simulation to determine structural system reliability: application to static and blast loadings. (Unpublished Doctoral thesis, City, University of London)
Tomas-Rodriguez, M. ORCID: 0000-0001-9630-9579 & Castillo-Rivera, S. (2020). Rotorcraft Fuselage/Main Rotor Coupling Dynamics Modelling and Analysis. International Journal of Nonlinear Sciences and Numerical Simulation, 22(3-4), pp. 317-340. doi: 10.1515/ijnsns-2019-0102
Toubeau, J. F., Morstyn, T., Bottieau, J. , Zheng, K., Apostolopoulou, D. ORCID: 0000-0002-9012-9910, De Greve, Z., Wang, Y. & Vallee, F. C. (2020). Capturing Spatio-Temporal Dependencies in the Probabilistic Forecasting of Distribution Locational Marginal Prices. IEEE Transactions on Smart Grid, 12(3), pp. 2663-2674. doi: 10.1109/tsg.2020.3047863
Tran, S. N., Garcez, A., Weyde, T. ORCID: 0000-0001-8028-9905 , Yin, J., Zhang, Q. ORCID: 0000-0003-0982-2986 & Karunanithi, M. (2020). Sequence Classification Restricted Boltzmann Machines With Gated Units. IEEE Transactions on Neural Networks and Learning Systems, 31(11), pp. 4806-4815. doi: 10.1109/tnnls.2019.2958103
Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979, Feng, R. & Liu, F. (2020). Shape Optimization of Assembled Single-Layer Grid Structure with Semi-Rigid Joints. Procedia Manufacturing, 44, pp. 12-19. doi: 10.1016/j.promfg.2020.02.199
Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979, Nicolaou, A., Mistry, A. D. & Efthymiou, E. (2020). Topology optimisation of lattice telecommunication tower and performance-based design considering wind and ice loads. Structures, 27, pp. 2379-2399. doi: 10.1016/j.istruc.2020.08.010
Vakilipour, S., Tohidi, Y., Al-Zaili, J. ORCID: 0000-0003-4072-2107 & Riazi, R. (2020). A numerical investigation of CO2 dilution on the thermochemical characteristics of a swirl stabilized diffusion flame. Applied Mathematics and Mechanics, 41(2), pp. 327-348. doi: 10.1007/s10483-020-2571-6
Veerasamy, D. & Atkin, C.J. ORCID: 0000-0003-2529-1978 (2020). A rational method for determining intermittency in the transitional boundary layer. Experiments in Fluids, 61(1), article number 11. doi: 10.1007/s00348-019-2856-5
Veletic, J (2020). Development of substructure and superelement codes for the FEA of tall slender buildings. (Unpublished Doctoral thesis, City, University of London)
Vidal Roncero, A. ORCID: 0000-0001-8177-518X, Gavaises, M. ORCID: 0000-0003-0874-8534 & Koukouvinis, P. ORCID: 0000-0002-3945-3707 (2020). Vapor-Liquid Equilibrium calculations at specified composition, density and temperature with the Perturbed Chain Statistical Associating Fluid Theory (PC-SAFT) Equation of State. Fluid Phase Equilibria, 521, article number 112661. doi: 10.1016/j.fluid.2020.112661
Villoslada, D., Santos, M. & Tomas-Rodriguez, M. ORCID: 0000-0001-9630-9579 (2020). Inerter-based Passive Structural Control for Barge Floating Offshore Wind Turbines. In: IFAC-PapersOnLine. doi: 10.1016/j.ifacol.2020.12.1240
Vimalakanthan, K., Read, M. G. ORCID: 0000-0002-7753-2457 & Kovacevic, A. ORCID: 0000-0002-8732-2242 (2020). Numerical Modelling and Experimental Validation of Twin-Screw Expander. Energies, 13(18), article number 4700. doi: 10.3390/en13184700
Vimalakanthan, K., Read, M. G. ORCID: 0000-0002-7753-2457 & Kovacevic, A. ORCID: 0000-0002-8732-2242 (2020). Performance Prediction and Optimisation of Twin-Screw Expander. IIR Rankine Conference 2020, article number 1146. doi: 10.18462/iir.rankine.2020.146
Vlahakis, E. E. (2020). Distributed optimal and predictive control methods for networks of dynamic systems. (Unpublished Doctoral thesis, City, University of London)
Wang, C., Adams, M., Luo, T. , Jin, T., Luo, F. & Gavaises, M. ORCID: 0000-0003-0874-8534 (2020). Hole-to-hole variations in coupled flow and spray simulation of a double-layer multi-holes diesel nozzle. International Journal of Engine Research, 22(10), pp. 3233-3246. doi: 10.1177/1468087420963986
Wang, J., Yan, S. ORCID: 0000-0001-8968-6616, Ma, Q. , Wang, J., Xie, Z. & Marran, S. (2020). Modelling of focused wave interaction with wave energy converter models using qaleFOAM. Proceedings of the Institution of Civil Engineers - Engineering and Computational Mechanics, 173(3), pp. 100-118. doi: 10.1680/jencm.19.00035
Wang, L., Liu, F., Ning, Y. , Bradley, R., Yang, C., Yong, K-T., Zhao, B. & Wu, W. ORCID: 0000-0003-1462-6402 (2020). Biocompatible Mesoporous Hollow Carbon Nanocapsules for High Performance Supercapacitors.. Scientific Reports, 10(1), article number 4306. doi: 10.1038/s41598-020-61138-4
Wang, L., Shen, N., Fu, F. ORCID: 0000-0002-9176-8159 & Qian, K. (2020). Strengthening mechanism and microstructures of fiber reinforced coral concrete. Proceedings of the Institution of Civil Engineers: Structures and Buildings, 175(9), pp. 671-681. doi: 10.1680/jstbu.19.00246
Wang, L., Shen, N., Zhang, M. , Fu, F. ORCID: 0000-0002-9176-8159 & Qian, K. (2020). Bond performance of Steel-CFRP Bar reinforced Coral Concrete beams. Construction and Building Materials, 245, article number 118456. doi: 10.1016/j.conbuildmat.2020.118456
Wang, L., Song, Z., Huang, C. , Qian, K. & Fu, F. ORCID: 0000-0002-9176-8159 (2020). Flexural capacity of Steel-FCB bar reinforced coral concrete beams. Structural Concrete, 21(6), pp. 2722-2735. doi: 10.1002/suco.201900409
Wang, L., Zhang, J., Huang, C. & Fu, F. ORCID: 0000-0002-9176-8159 (2020). Comparative study of Steel-FRP, FRP and steel reinforced coral concrete beams in their flexural performance. Materials, 13(9), article number 2097. doi: 10.3390/ma13092097
Wang, L., Zhang, J. W., Chen, W. , Fu, F. ORCID: 0000-0002-9176-8159 & Qian, K. (2020). Short term Crack width Prediction of CFRP Bars reinforced Coral Concrete. Engineering Structures, 218, article number 110829. doi: 10.1016/j.engstruct.2020.110829
Wang, Q., Liao, K. & Ma, Q. ORCID: 0000-0001-5579-6454 (2020). The Influence of Tilt Angle on the Aerodynamic Performance of a Wind Turbine. Applied Sciences, 10(15), article number 5380. doi: 10.3390/app10155380
Wang, Q., Lu, C., Zhu, W. , Fu, F. ORCID: 0000-0002-9176-8159 & Qian, K. (2020). Axial Compressive capacity of RC Square Columns strengthened by Prestressed CFRP with RPC pads. Composite Structures, 242, article number 112153. doi: 10.1016/j.compstruct.2020.112153
Wang, S., Yang, X., Li, L. ORCID: 0000-0002-4026-0216 , Nadler, P, Arcucci, R, Huang, Y, Teng, Z & Guo, Y (2020). A Bayesian Updating Scheme for Pandemics: Estimating the Infection Dynamics of COVID-19. IEEE Computational Intelligence Magazine, 15(4), pp. 23-33. doi: 10.1109/mci.2020.3019874
Wang, Y., Cai, G., Si Larbi, A. , Waldmann, D., Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 & Ran, J. (2020). Monotonic axial compressive behaviour and confinement mechanism of square CFRP-steel tube confined concrete. Engineering Structures, 217, article number 110802. doi: 10.1016/j.engstruct.2020.110802
Wang, Z. & Giaralis, A. ORCID: 0000-0002-2952-1171 (2020). Enhanced serviceability performance in wind-excited tall buildings equipped with optimal tuned mass damper inerter via top-storey softening. In: EURODYN 2020 Proceedings of the XI International Conference on Structural Dynamics. EURODYN 2020 XI: International Conference on Structural Dynamics, 23-26 Nov 2020, Athens, Greece.
Wang, Z. & Giaralis, A. ORCID: 0000-0002-2952-1171 (2020). MOTION CONTROL PERFORMANCE OF TUNED MASS DAMPER INERTER (TMDI) IN CONTINUOUS WHITE-NOISE EXCITED CANTILEVERED BEAMS WITH VARIOUS SHAPES. EURODYN 2020: XI International Conference on Structural Dynamics, 1, pp. 1576-1585. doi: 10.47964/1120.9128.20319
Wang, Z., Li, Y., Zhang, T. , Hu, J., Wang, Y., Wei, Y., Liu, T., Sun, T. ORCID: 0000-0003-3861-8933 & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2020). A Sensitive and Reliable Carbon Monoxide Monitor for Safety-Focused Applications in Coal Mine Using a 2.33-$\mu$ m Laser Diode. IEEE Sensors Journal, 20(1), pp. 171-177. doi: 10.1109/jsen.2019.2942366
Welykholowa, K., Hosanee, M., Chan, G. , Cooper, R., Kyriacou, P. A. ORCID: 0000-0002-2868-485X, Zheng, D., Allen, J., Abbott, D., Menon, C., Lovell, N. H., Howard, N., Chan, W-S., Lim, K., Fletcher, R., Ward, R. & Elgendi, M. (2020). Multimodal Photoplethysmography-Based Approaches for Improved Detection of Hypertension. Journal of Clinical Medicine, 9(4), article number 1203. doi: 10.3390/jcm9041203
Werner, J.S., Belz, M., Klein, K-F. , Sun, T. ORCID: 0000-0003-3861-8933 & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2020). Fast response time fiber optical pH and oxygen sensors. Proceedings of SPIE, 11233, article number 112331K. doi: 10.1117/12.2566993
White, M. ORCID: 0000-0002-7744-1993, Read, M. G. ORCID: 0000-0002-7753-2457 & Sayma, A. I. ORCID: 0000-0003-2315-0004 (2020). Making the case for cascaded organic Rankine cycles for waste-heat recovery. Energy, 211, article number 118912. doi: 10.1016/j.energy.2020.118912
White, M. ORCID: 0000-0002-7744-1993 & Sayma, A. I. ORCID: 0000-0003-2315-0004 (2020). Fluid Selection for Small-Scale Rankine Cycle Plants: Can You Draw Some Lines in the Sand?. IIR Rankine Conference 2020, article number 1161. doi: 10.18462/iir.rankine.2020.1161
White, M. ORCID: 0000-0002-7744-1993 & Sayma, A. I. (2020). A new method to identify the optimal temperature of latent-heat thermal-energy storage systems for power generation from waste heat. International Journal of Heat and Mass Transfer, 149, article number 119111. doi: 10.1016/j.ijheatmasstransfer.2019.119111
Whitworth, A. H. & Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 (2020). Embodied Energy Optimization of Steel-Concrete Composite Beams using a Genetic Algorithm. In: Procedia Manufacturing. 1st International Conference on Optimization-Driven Architectural Design, 5-7 Nov 2019, Amman, Jordan. doi: 10.1016/j.promfg.2020.02.275
Whitworth, A. H. & Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 (2020). Genetic algorithm for embodied energy optimisation of steel-concrete composite beams. Sustainability, 12(8), article number 3102. doi: 10.3390/su12083102
Witon, A., Shirazibehehsti, A., Cooke, J. , Aviles, A., Adapa, R., Menon, D. K., Chennu, S., Bekinschtein, T., Lopez, J. D., Litvak, V., Li, L. ORCID: 0000-0002-4026-0216, Friston, K. & Bowman, H. (2020). Sedation Modulates Frontotemporal Predictive Coding Circuits and the Double Surprise Acceleration Effect. Cerebral Cortex, 30(10), pp. 5204-5217. doi: 10.1093/cercor/bhaa071
Xie, L., Wang, S., Ding, J. , Banerjee, J. R. & Wang, J. (2020). An accurate beam theory and its first-order approximation in free vibration analysis. Journal of Sound and Vibration, 485, article number 115567. doi: 10.1016/j.jsv.2020.115567
Xie, Z., Stoesser, T., Yan, S. ORCID: 0000-0001-8968-6616 , Ma, Q. ORCID: 0000-0001-5579-6454 & Lin, P. (2020). A Cartesian cut-cell based multiphase flow model for large-eddy simulation of three-dimensional wave-structure interaction. Computers & Fluids, 213, article number 104747. doi: 10.1016/j.compfluid.2020.104747
Yan, D., Tang, Q., Kovacevic, A. ORCID: 0000-0002-8732-2242 , Zhang, Y., Liu, W., Liang, P. & Zhang, H. (2020). Designing nano-aluminum laden fuel pump for aviation applications. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 234(6), pp. 634-643. doi: 10.1177/0954408920935315
Yan, S. ORCID: 0000-0001-8968-6616, Ma, Q. ORCID: 0000-0001-5579-6454, Asnim, W. , Sulaiman, Z. & Sun, H. (2020). Comparative study on focusing wave interaction with cylinder using QALE-FEM and qaleFOAM. In: Proceedings of the Thirtieth (2020) International Ocean and Polar Engineering Conference. (p. 2236). Cupertino, California, USA: International Society of Offshore and Polar Engineers (ISOPE).
Yan, S. ORCID: 0000-0001-8968-6616, Ma, Q. ORCID: 0000-0001-5579-6454 & Wang, J. (2020). Quadric SFDI for Laplacian Discretisation in Lagrangian Meshless Methods. Journal of Marine Science and Application, 19(3), pp. 362-380. doi: 10.1007/s11804-020-00159-x
Yan, S. ORCID: 0000-0001-8968-6616, Wang, J., Wang, J. , Ma, Q. ORCID: 0000-0001-5579-6454 & Xie, Z. (2020). CCP-WSI Blind Test Using qaleFOAM with an Improved Passive Wave Absorber. International Journal of Offshore and Polar Engineering, 30(1), pp. 43-52. doi: 10.17736/ijope.2020.jc781
Yang, D., Guzmán-Iñigo, J. ORCID: 0000-0002-1833-6034 & Morgans, A. S. (2020). Sound generation by entropy perturbations passing through a sudden flow expansion. Journal of Fluid Mechanics, 905, article number R2. doi: 10.1017/jfm.2020.849
Yazdani Nezhad, H. ORCID: 0000-0003-0832-3579, Wang, X., Court, S. , Thapa, B. & Erkoyuncu, J. A. (2020). Development of an Augmented Reality Equipped Composites Bonded Assembly and Repair for Aerospace Applications. Paper presented at the 4th IFAC AMEST 2020, 10-11 Sep 2020, Online.
Yu, Z., Hu, Z., Zheng, X. , Ma, Q. ORCID: 0000-0001-5579-6454 & Hao, H. (2020). Aeroelastic Performance Analysis of Wind Turbine in the Wake with a New Elastic Actuator Line Model. Water, 12(5), article number 1233. doi: 10.3390/w12051233
Zhang, H., Wang, D. & Rahman, B. M. ORCID: 0000-0001-6384-0961 (2020). Parallel structured fiber in-line multiple Fabry-Perot cavities for high temperature sensing. Sensors and Actuators, A: Physical, 313, article number 112214. doi: 10.1016/j.sna.2020.112214
Zhang, K., Ghobadian, A. & Nouri, J. M. ORCID: 0000-0001-8610-3737 (2020). Scale-Resolving Simulation of a Propane-Fuelled Industrial Gas Turbine Combustor Using Finite-Rate Tabulated Chemistry. Fluids, 5(3), article number 126. doi: 10.3390/fluids5030126
Zhang, L., Tian, Z., Chen, N-K. , Grattan, K. T. V. ORCID: 0000-0003-2250-3832, Yao, Y., Rahman, B. M. ORCID: 0000-0001-6384-0961, Li, X., Yao, C., Han, H., Chui, H-C. & Liaw, S-K. (2020). Pulse Dynamics of an All-Normal-Dispersion Ring Fiber Laser Under Four Different Pulse Regimes. IEEE Access, 8, pp. 115263-115272. doi: 10.1109/access.2020.3004384
Zhang, L., Tian, Z., Chen, N-K. , Han, H. K., Liu, C., Grattan, K. T. V. ORCID: 0000-0003-2250-3832, Rahman, B. M. ORCID: 0000-0001-6384-0961, Zhou, H., Liaw, S. K. & Bai, C. (2020). Room-Temperature Power-Stabilized Narrow-Linewidth Tunable Erbium-Doped Fiber Ring Laser Based on Cascaded Mach-Zehnder Interferometers with Different Free Spectral Range for Strain Sensing. Journal of Lightwave Technology, 38(7), pp. 1966-1974. doi: 10.1109/jlt.2020.2971666
Zhang, N., Yan, S. ORCID: 0000-0001-8968-6616, Zheng, X. & Ma, Q. ORCID: 0000-0001-5579-6454 (2020). A 3D Hybrid Model Coupling SPH and QALE-FEM for Simulating Nonlinear Wave-structure Interaction. International Journal of Offshore and Polar Engineering, 30(1), pp. 11-19. doi: 10.17736/ijope.2020.jc776
Zhang, T., Iqbal, S., Zhang, X-Y. , Wu, W. ORCID: 0000-0003-1462-6402, Su, D. & Zhou, H-L. (2020). Recent advances in highly efficient organic-silicon hybrid solar cells. Solar Energy Materials and Solar Cells, 204, article number 110245. doi: 10.1016/j.solmat.2019.110245
Zhao, L., Wang, J., Li, Z. , Hou, M., Dong, G., Liu, T., Sun, T. ORCID: 0000-0003-3861-8933 & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2020). Quasi-Distributed Fiber Optic Temperature and Humidity Sensor System for Monitoring of Grain Storage in Granaries. IEEE Sensors Journal, 20(16), pp. 9226-9233. doi: 10.1109/jsen.2020.2989163
Zhou, H., Zhang, Y., Fu, F. ORCID: 0000-0002-9176-8159 & Wu, J. (2020). Collapse Mechanism of Single-Layer Cylindrical Latticed Shell under Severe Earthquake. Materials, 13(11), article number 2519. doi: 10.3390/ma13112519
Zhu, W., Li, M., Qing, H. , Fu, F. ORCID: 0000-0002-9176-8159 & Liu, F (2020). Behavior of RC beams Strengthened using steel wire-carbon fiber reinforced plates. Materials, 13(18), article number 3996. doi: 10.3390/ma13183996
Zimos, D.K., Papanikolaou, V. K., Kappos, A. J. ORCID: 0000-0002-5566-5021 & Mergos, P.E. ORCID: 0000-0003-3817-9520 (2020). Shear-Critical Reinforced Concrete Columns under Increasing Axial Load. ACI Structural Journal, 117(5), pp. 29-39. doi: 10.14359/51725886
Zimos, D.K., Papanikolaou, V.K., Kappos, A. J. ORCID: 0000-0002-5566-5021 & Mergos, P.E. ORCID: 0000-0003-3817-9520 (2020). Shear critical R/C columns under increasing axial load. ACI Structural Journal, 117(5), pp. 29-40. doi: 10.14359/51725886
du Puits, R. & Bruecker, C. ORCID: 0000-0001-5834-3020 (2020). Fluctuations of the wall shear stress vector in a large-scale natural convection cell. AIP Advances, 10(7), article number 75105. doi: 10.1063/5.0006610
2019
Abambres, M., Rajana, K., Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 & Ribeiro, T. P. (2019). Neural network-based formula for the buckling load prediction of I-section cellular steel beams. Computers, 8(1), article number 2. doi: 10.3390/computers8010002
Abay, T., Shafqat, K. & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2019). Perfusion Changes at the Forehead Measured by Photoplethysmography during a Head-Down Tilt Protocol. Biosensors, 9(2), article number 71. doi: 10.3390/bios9020071
Abdan, S., Basha, N., Kovacevic, A. ORCID: 0000-0002-8732-2242 , Stosic, N., Birari, A. & Asati, N. (2019). Development and Design of Energy Efficient Oil-Flooded Screw Compressors. In: IOP Conference Series: Materials Science and Engineering. doi: 10.1088/1757-899X/604/1/012015
Abdan, S., Stosic, N., Kovacevic, A. ORCID: 0000-0002-8732-2242 , Smith, I. K. ORCID: 0000-0003-1524-9880 & Asati, N. (2019). Analysis of rolling bearing power loss models for twin screw oil injected compressor. In: IOP Conference Series: Materials Science and Engineering. doi: 10.1088/1757-899X/604/1/012013
Aboukhedr, M. (2019). Two-Phase Flow Simulation in Porous Media Geometries Reconstructed from micro CT Data : Application to Fluid Transport at Low Capillary Numbers. (Unpublished Doctoral thesis, City, University of London)
Abro, F. I., Rauf, F., Mobeen-ur-Rehman , Chowdhry, B. S. & Rajarajan, M. (2019). Towards Security of GSM Voice Communication. Wireless Personal Communications, 108(3), pp. 1933-1955. doi: 10.1007/s11277-019-06502-y
Acarali, D., Rajarajan, M., Komninos, N. ORCID: 0000-0003-2776-1283 & Zarpelao, B. (2019). Modelling the Spread of Botnet Malware in IoT-Based Wireless Sensor Networks. Security and Communication Networks, 2019, pp. 1-13. doi: 10.1155/2019/3745619
Ahmad, H., Karim, M. R. & Rahman, B. M. ORCID: 0000-0001-6384-0961 (2019). Dispersion-engineered silicon nitride waveguides for mid-infrared supercontinuum generation covering the wavelength range 0.8-6.5 mu m. Laser Physics, 29(2), article number 025301. doi: 10.1088/1555-6611/aaf63d
Ahmed, I. M. & Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 (2019). The evolution of composite flooring systems: applications, testing, modelling and eurocode design approaches. Journal of Constructional Steel Research, 155, pp. 286-300. doi: 10.1016/j.jcsr.2019.01.007
Alam, N., Nadjai, A., Maraveas, C. , Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 & Kahanji, C. (2019). Effect of air-gap on response of fabricated slim floor beams in fire. Journal of Structural Fire Engineering, 10(2), pp. 155-174. doi: 10.1108/jsfe-04-2018-0011
Almenara Ahijón, J., Santos, M. & Tomas-Rodriguez, M. ORCID: 0000-0001-9630-9579 (2019). Optimización heurística con criterios de error de control TMD en turbinas marinas flotantes. In: XL Jornadas de Automática. doi: 10.17979/spudc.9788497497169.001
Alsanat, H., Gunalan, S., Keerthan, P. , Guan, H. & Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 (2019). Web crippling behaviour and design of aluminium lipped channel sections under two flange loading conditions. Thin-Walled Structures, 144, article number 106265. doi: 10.1016/j.tws.2019.106265
Amiryar, M. E. (2019). An assessment of flywheel storage for efficient provision of reliable power for residential premises in islanded operation. (Unpublished Doctoral thesis, City, University of London)
Amiryar, M. E. & Pullen, K. R. ORCID: 0000-0001-8501-9226 (2019). Assessment of the Carbon and Cost Savings of a Combined Diesel Generator, Solar Photovoltaic, and Flywheel Energy Storage Islanded Grid System. Energies, 12(17), article number 3356. doi: 10.3390/en12173356
An, D., Lotfian, S., Mesbah, D. , Ayre, D., Yoosefinejad, A., Thakur, V. K. & Yazdani Nezhad, H. ORCID: 0000-0003-0832-3579 (2019). Ultra-thin electrospun nanofibers for development of damage-tolerant composite laminates. Materials Today Chemistry, 14, article number 100202. doi: 10.1016/j.mtchem.2019.100202
Ananthapuvirajah, A. (2019). Free vibration and flutter behaviour of metallic and composite aircraft using DSM and developments of dynamic stiffness matrices for structural elements with applications. (Unpublished Doctoral thesis, City, University of London)
Apostolopoulou, D. ORCID: 0000-0002-9012-9910 & McCulloch, M. (2019). Optimal Short-term Operation of a Cascaded Hydro-Solar Hybrid System: a Case Study in Kenya. IEEE Transactions on Sustainable Energy, 10(4), pp. 1878-1889. doi: 10.1109/tste.2018.2874810
Arnold, P., Rakocevic, V. ORCID: 0000-0002-3081-0448 & Habermann, J. (2019). Hybrid Radio Resource Management with Co-scheduling for Relay Extended OFDMA Networks. Wireless Personal Communications, 109(2), pp. 1133-1160. doi: 10.1007/s11277-019-06607-4
Ayub, N. (2019). Fair relay selection in wireless rural networks using game theory. (Unpublished Doctoral thesis, City, University of London)
Ayub, N. & Rakocevic, V. ORCID: 0000-0002-3081-0448 (2019). Cooperative smartphone relay selection based on fair power utilization for network coverage extension. Information, 10(12), article number 381. doi: 10.3390/info10120381
Ayub, N. & Rakocevic, V. ORCID: 0000-0002-3081-0448 (2019). Credit-Based Relay Selection Algorithm Using Stackelberg Game. Wireless Days, doi: 10.1109/WD.2019.8734269
Babazadehrokni, H. B. (2019). Thermo-physical property models for well-characterized hydrocarbon mixtures and fuels and effect of composition on fluid properties up to 4,500 bar. (Unpublished Doctoral thesis, City, University of London)
Bahraini, M. S. ORCID: 0000-0002-3692-2168, Rad, A. B. & Bozorg, M. (2019). SLAM in Dynamic Environments: A Deep Learning Approach for Moving Object Tracking Using ML-RANSAC Algorithm. Sensors, 19(17), article number 3699. doi: 10.3390/s19173699
Baishya, N., Budidha, K. ORCID: 0000-0002-6329-8399, Mamouei, M. H. , Qassem, M., Vadgama, P. & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2019). Near Infrared Spectrometric Investigations on the behaviour of Lactate. 2019 41st Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), pp. 5769-5772. doi: 10.1109/embc.2019.8857833
Banerjee, J. R. (2019). Dewey Hodges’s Research in Structural Dynamics, Aeroelasticity, and Composites: A Personal Perspective. AIAA Journal, 57(10), pp. 4120-4124. doi: 10.2514/1.j057495
Banerjee, J. R. (2019). Review of the dynamic stiffness method for free-vibration analysis of beams. Transportation Safety and Environment, 1(2), pp. 106-116. doi: 10.1093/tse/tdz005
Banerjee, J. R. & Ananthapuvirajah, A. (2019). Commentary on, "Discussion on 'Free vibration of functionally graded beams and frameworks using the dynamic stiffness method' by Banerjee et al., Journal of Sound and Vibration 442 (2018) 34-47.". Journal of Sound and Vibration, 466, article number 114986. doi: 10.1016/j.jsv.2019.114986
Banerjee, J. R. & Ananthapuvirajah, A. (2019). Coupled axial-bending dynamic stiffness matrix for beam elements. Computers and Structures, 215, pp. 1-9. doi: 10.1016/j.compstruc.2019.01.007
Banerjee, J. R. & Ananthapuvirajah, A. (2019). Free flexural vibration of tapered beams. Computers & Structures, 224, article number 106106. doi: 10.1016/j.compstruc.2019.106106
Basha, N., Kovacevic, A. ORCID: 0000-0002-8732-2242 & Rane, S (2019). Analysis of oil-injected twin-screw compressor with multiphase flow models. Designs, 3(4), article number 54. doi: 10.3390/designs3040054
Basha, N., Kovacevic, A. ORCID: 0000-0002-8732-2242 & Rane, S. (2019). User defined nodal displacement of numerical mesh for analysis of screw machines in FLUENT. IOP Conference Series: Materials Science and Engineering, 604(1), article number 012012. doi: 10.1088/1757-899x/604/1/012012
Bianchi, G., Rane, S., Fatigati, F. , Cipollone, R. & Kovacevic, A. ORCID: 0000-0002-8732-2242 (2019). Numerical CFD simulations and indicated pressure measurements on a sliding vane expander for heat to power conversion applications. Designs, 3(3), article number 31. doi: 10.3390/designs3030031
Bianconi, F., Kather, J. & Reyes-Aldasoro, C. C. ORCID: 0000-0002-9466-2018 (2019). Evaluation of Colour Pre-processing on Patch-Based Classification of H&E-Stained Images. In: Digital Pathology. ECDP 2019. doi: 10.1007/978-3-030-23937-4_7
Boushehri, K., Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 & Cai, G. (2019). Seismic behaviour of RWS moment connections to deep columns with European sections. Journal of Constructional Steel Research, 161, pp. 416-435. doi: 10.1016/j.jcsr.2019.07.009
Brunhart, M., Soteriou, C., Daveau, C. , Gavaises, M. ORCID: 0000-0003-0874-8534, Koukouvinis, P. ORCID: 0000-0002-3945-3707 & Winterbourn, M. (2019). Cavitation erosion risk indicators for a thin gap within a diesel fuel pump. Wear, 442-44, article number 203024. doi: 10.1016/j.wear.2019.203024
Budidha, K. & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2019). Photoplethysmography for Quantitative Assessment of Sympathetic Nerve Activity (SNA) During Cold Stress. Frontiers in Physiology, 9(JAN), article number 1863. doi: 10.3389/fphys.2018.01863
Budidha, K. ORCID: 0000-0002-6329-8399, Mamouei, M. H., Baishya, N. , Vadgama, P. & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2019). In vitro quantification of lactate in Phosphate Buffer Saline (PBS) samples. 2019 41st Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), pp. 1205-1208. doi: 10.1109/embc.2019.8857756
Cai, B., Long-Fei, X. & Fu, F. ORCID: 0000-0002-9176-8159 (2019). Shear Resistance Prediction of post-fire reinforced concrete beams using artificial neural network. International Journal of Concrete Structures and Materials, 13(1), article number 46. doi: 10.1186/s40069-019-0358-8
Cai, B., Zhang, B. & Fu, F. ORCID: 0000-0002-9176-8159 (2019). Post-fire reliability analysis of concrete beams retrofitted with polymers: a new approach. Proceedings of the Institution of Civil Engineers: Structures and Buildings, 173(11), pp. 888-902. doi: 10.1680/jstbu.19.00037
Camara, A. ORCID: 0000-0002-1675-2640, Kavrakov, I., Nguyen, K. & Morgenthal, G. (2019). Complete framework of wind-vehicle-bridge interaction with random road surfaces. Journal of Sound and Vibration, 458, pp. 197-217. doi: 10.1016/j.jsv.2019.06.020
Cao, X., Deng, X., Jin, L-Z. , Fu, F. ORCID: 0000-0002-9176-8159 & Qian, K. (2019). Experimental study on Shear capacity of cementitious composite RPC Beams using high strength steel. Proceedings of the Institution of Civil Engineers: Structures and Buildings, 174(4), pp. 276-291. doi: 10.1680/jstbu.19.00051
Casari, N., Fadiga, E., Pinelli, M. , Suman, A., Kovacevic, A. ORCID: 0000-0002-8732-2242, Rane, S. & Ziviani, D. (2019). Numerical investigation of oil injection in a Roots blower operated as expander. IOP Conference Series: Materials Science and Engineering, 604(1), article number 12075. doi: 10.1088/1757-899X/604/1/012075
Cattell, R. (2019). An experimental investigation in to a highly forward swept, low specific speed turbocompressor. (Unpublished Doctoral thesis, City, University of London)
Chan, G., Cooper, R., Hosanee, M. , Welykholowa, K., Kyriacou, P. A. ORCID: 0000-0002-2868-485X, Zheng, D., Allen, J., Abbott, D., Lovell, N. H., Fletcher, R. & Elgendi, M. (2019). Multi-Site Photoplethysmography Technology for Blood Pressure Assessment: Challenges and Recommendations. Journal of Clinical Medicine, 8(11), article number 1827. doi: 10.3390/jcm8111827
Chatterjee, S. ORCID: 0000-0002-7735-6123 & Kyriacou, P. A. (2019). Estimating the Dependence of Differential Pathlength Factor on Blood Volume and Oxygen Saturation using Monte Carlo method. 2019 41st Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), pp. 75-78. doi: 10.1109/embc.2019.8856437
Chatterjee, S. & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2019). Monte Carlo Analysis of Optical Interactions in Reflectance and Transmittance Finger Photoplethysmography. Sensors, 19(4), article number 789. doi: 10.3390/s19040789
Chatterjee, S. ORCID: 0000-0002-7735-6123 & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2019). Monte Carlo model for reflectance Pulse Oximetry using pulsatile monolayer perfused skin tissue. Journal of Physics: Conference Series, 1151, article number 12005. doi: 10.1088/1742-6596/1151/1/012005
Chekakta, Z. ORCID: 0000-0002-4664-6283, Zerikat, M., Bouzid, Y. & Abderrahim, M. (2019). Model-Free Control applied for position control of Quadrotor using ROS. In: 2019 6th International Conference on Control, Decision and Information Technologies (CoDIT). 2019 6th International Conference on Control, Decision and Information Technologies (CoDIT), 23-26 Apr 2019, Paris, France. doi: 10.1109/codit.2019.8820614
Chen, X., Shaw, C., Gelman, L. & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2019). Advances in test and measurement of the interface adhesion and bond strengths in coating-substrate systems, emphasising blister and bulk techniques. Measurement, 139, pp. 387-402. doi: 10.1016/j.measurement.2019.03.026
Chen, X., Wan, D-W., Jin, L-Z. , Qian, K. & Fu, F. ORCID: 0000-0002-9176-8159 (2019). Experimental studies and Microstructure Analysis for Ultra High-Performance Reactive Powder Concrete. Construction and Building Materials, 229, article number 116924. doi: 10.1016/j.conbuildmat.2019.116924
Chen, Y., Li, C., Chen, J-H. , Zheng, Z., Sun, T. ORCID: 0000-0003-3861-8933, Grattan, K. T. V. ORCID: 0000-0003-2250-3832 & Xu, F. (2019). Demonstration of a microelectromechanical tunable F-P cavity based on graphene-bonded fiber devices. Optics Letters, 44(7), pp. 1876-1879. doi: 10.1364/ol.44.001876
Chen, Y., Wang, J., Zhao, Y. , Liu, X-J, Zhang, H., Murdoch, I., Hull, C. ORCID: 0000-0002-2205-4443, Barbur, J. L. ORCID: 0000-0002-2187-5004, Sun, T. ORCID: 0000-0003-3861-8933 & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2019). Small core FBG-based temperature compensated ‘smart’ contact lens for effective intraocular pressure measurement. Measurement: Sensors, 1, article number 100001. doi: 10.1016/j.measen.2019.100001
Chugh, S., Ghosh, S. ORCID: 0000-0002-1992-2289, Gulistan, A. & Rahman, B. M. A. (2019). Machine Learning Regression Approach to the Nanophotonic Waveguide Analyses. Journal of Lightwave Technology, 37(24), pp. 6080-6089. doi: 10.1109/jlt.2019.2946572
Chugh, S., Gulistan, A., Ghosh, S. ORCID: 0000-0002-1992-2289 & Rahman, B. M. A. ORCID: 0000-0001-6384-0961 (2019). Machine learning approach for computing optical properties of a photonic crystal fiber. Optics Express, 27(25), pp. 36414-36425. doi: 10.1364/oe.27.036414
Cristofaro, M., Edelbauer, W., Koukouvinis, P. ORCID: 0000-0002-3945-3707 & Gavaises, M. ORCID: 0000-0003-0874-8534 (2019). A numerical study on the effect of cavitation erosion in a Diesel injector. Applied Mathematical Modelling, 78, pp. 200-216. doi: 10.1016/j.apm.2019.09.002
Cui, H., Mahadik, Y., Hallett, S. R. , Partridge, I. K., Allegri, G., Ponnusami, S. A. & Petrinic, N. (2019). Coupon scale Z-pinned IM7/8552 delamination tests under dynamic loading. Composites Part A: Applied Science and Manufacturing, 125, article number 105565. doi: 10.1016/j.compositesa.2019.105565
Cvjetkovic, Milan (2019). Distributed localisation algorithm for wireless ad hoc networks of moving nodes. (Unpublished Doctoral thesis, City, University of London)
Das, D. (2019). Mixed formulation for seismic analysis of shear critical reinforced concrete, steel and composite structures. (Unpublished Doctoral thesis, City, University of London)
Dasari, B. L., Brabazon, D. & Naher, S. ORCID: 0000-0003-2047-5807 (2019). Prediction of Mechanical Properties of Graphene Oxide Reinforced Aluminum Composites. Metals, 9(10), article number 1077. doi: 10.3390/met9101077
Dasari, BhagyaLakshmi (2019). Production and characterisation of graphene oxide reinforced aluminium matrix composites. (Unpublished Doctoral thesis, City, University of London)
De Angelis, M., Giaralis, A. ORCID: 0000-0002-2952-1171, Petrini, F. & Pietrosanti, D. (2019). Optimal tuning and assessment of inertial dampers with grounded inerter for vibration control of seismically excited base-isolated systems. Engineering Structures, 196, article number 109250. doi: 10.1016/j.engstruct.2019.05.091
Deane, S., Avdelidis, N. P., Ibarra-Castanedo, C. , Maldague, X., Tsourdos, A., Williamson, A., Yazdani Nezhad, H. ORCID: 0000-0003-0832-3579 & Zhang, H. (2019). Autonomous Systems Imaging of Aerospace Structures. Paper presented at the 10th International Symposium on NDT in Aerospace, 24-26 Oct 2018, Dresden, Germany.
Deane, S., Avdelidis, N. P., Ibarra-Castanedo, C. , Yazdani Nezhad, H. ORCID: 0000-0003-0832-3579, Williamson, A., Zhang, H., Tzitzilonis, V., Maldague, X. P. V. & Tsourdos, A. (2019). Autonomous systems thermographic NDT of composite structures. Proceedings of SPIE 11004, Thermosense: Thermal Infrared Applications XLI, 11004, article number 110041. doi: 10.1117/12.2517426
Deane, S., Avdelidis, N. P., Ibarra-Castanedo, C. , Zhang, H., Yazdani Nezhad, H. ORCID: 0000-0003-0832-3579, Williamson, A. A., Mackley, T., Davis, M. J., Maldague, X. & Tsourdos, A. (2019). Application of NDT thermographic imaging of aerospace structures. Infrared Physics & Technology, 97, pp. 456-466. doi: 10.1016/j.infrared.2019.02.002
Dhara, P., Kumar, R., Binetti, L. , Nguyen, H., Alwis, L., Sun, T. ORCID: 0000-0003-3861-8933 & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2019). Optical fiber-based heavy metal detection using the Localized Surface Plasmon Resonance technique. IEEE Sensors Journal, 19(19), pp. 8720-8726. doi: 10.1109/jsen.2019.2921701
Dhingra, N., Song, J., Saxena, G. J. , Sharma, E. K. & Rahman, B. M. ORCID: 0000-0001-6384-0961 (2019). Design of a Compact Low-Loss Phase Shifter Based on Optical Phase Change Material. IEEE PHOTONICS TECHNOLOGY LETTERS, 31(21), pp. 1757-1760. doi: 10.1109/lpt.2019.2946187
Dirks, T. B. & Atkin, C.J. ORCID: 0000-0003-2529-1978 (2019). A consolidated method for predicting laminar boundary layers on rotating axi-symmetric bodies. European Journal of Mechanics, B/Fluids, 75, pp. 271-278. doi: 10.1016/j.euromechflu.2018.10.013
Dissanayake, K. P. W., Dhara, P., Kumar, R. , Ghosh, S. ORCID: 0000-0002-1992-2289, Nguyen, T.H., Sun, T. ORCID: 0000-0003-3861-8933 & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2019). Fibre optic chemical sensors for environmental monitoring using sensitive nano-material coatings. Asian Journal of Physics, 28(7-9), pp. 567-578.
Dissanayake, K. P. W., Vidakovic, M., Matthias, F. , Sun, T. ORCID: 0000-0003-3861-8933 & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2019). Graphene oxide coated long period grating for optical sensing purposes. In: Journal of Physics: Conference Series. Newton Researcher Links Workshop: 2018 Bio-Photonics For Medical Technologies, 23–25 Jul 2018, Malacca, Malaysia. doi: 10.1088/1742-6596/1151/1/012022
Dong, H., Yu, Z., Grattan, K. T. V. ORCID: 0000-0003-2250-3832 , Sun, T. ORCID: 0000-0003-3861-8933 & Li, T. (2019). Acoustic Standing Wave Field Measurement Using a Laser Doppler Vibrometer Based on the Hankel Fourier Algorithm. IEEE Access, 7, pp. 139013-139020. doi: 10.1109/access.2019.2942722
Efthymiou, Eleftheria-Anthi (2019). The effect of multi-angle spatially variable ground motions on the seismic behaviour of cable-stayed bridges. (Unpublished Doctoral thesis, City, University of London)
Fabian, M., Rente, B., Javdani, S. , Uceda, S., Godfrey, I., Young, B., Carlton, J., Sun, T. & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2019). Determination of the hydrodynamic performance of marine propellers using fibre Bragg gratings. Proceedings of SPIE - The International Society for Optical Engineering, 11199, article number 11199O. doi: 10.1117/12.2541280
Faghih, F. & Ayoub, A. ORCID: 0000-0002-2670-9662 (2019). Mechanical and self-sensing properties of concrete reinforced with carbon nanofibres. Advances in Cement Research, 33(3), pp. 97-113. doi: 10.1680/jadcr.18.00209
Faghih, F. & Ayoub, A. ORCID: 0000-0002-2670-9662 (2019). Structural performance of steel-concrete sandwich beams with carbon nanofiber reinforcement. Engineering Structures, 187, pp. 177-198. doi: 10.1016/j.engstruct.2019.02.051
Fonseca, J. ORCID: 0000-0002-7654-6005, Riaz, A. & Barreto, D. (2019). X-ray tomography of sand-rubber mixtures. In: International Conference on Tomography of Materials and Structures Australia. International Conference on Tomography of Materials and Structures Australia, 22-26 Jul 2019, Cairns, Australia.
Fonseca, J. ORCID: 0000-0002-7654-6005, Riaz, A., Bernal-Sanchez, J. , Barreto, D., McDougall, J., Miranda-Manzanares, M., Marinelli, A. & Dimitriadi, V. (2019). Particle–scale interactions and energy dissipation mechanisms in sand–rubber mixtures. Géotechnique Letters, 9(4), pp. 263-268. doi: 10.1680/jgele.18.00221
Fu, F. ORCID: 0000-0002-9176-8159 (2019). Editorial. Proceedings of the Institution of Civil Engineers - Structures and Buildings, 172(4), pp. 235-236. doi: 10.1680/jstbu.2019.172.4.235
Fumarola, I. (2019). Effect of Freestream Turbulence on the Boundary Layer on a Swept Leading Edge. (Unpublished Doctoral thesis, City, University of London)
Gao, S., Xu, M., Fu, F. ORCID: 0000-0002-9176-8159 & Guo, L. (2019). Performance of bolted steel-beam to CFST-column joints using stiffened angles in column-removal scenario. Journal of Constructional Steel Research, 159, pp. 459-475. doi: 10.1016/j.jcsr.2019.05.011
García-Magariño, I., Lacuesta, R., Rajarajan, M. & Lloret, J. (2019). Security in networks of unmanned aerial vehicles for surveillance with an agent-based approach inspired by the principles of blockchain. Ad Hoc Networks, 86, pp. 72-82. doi: 10.1016/j.adhoc.2018.11.010
Geyer, T. F., Kamps, L., Sarradj, E. & Brücker, C. ORCID: 0000-0001-5834-3020 (2019). Vortex Shedding and Modal Behavior of a Circular Cylinder Equipped with Flexible Flaps. Acta Acustica united with Acustica, 105(1), pp. 210-219. doi: 10.3813/aaa.919301
Ghosh, S. ORCID: 0000-0002-1992-2289 & Rahman, B. M. ORCID: 0000-0001-6384-0961 (2019). Design and optimization of compact silicon photonic sensors. In: Proceedings of SPIE - The International Society for Optical Engineering. Fifth Conference on Sensors, MEMS, and Electro-Optic Systems, 8-10 Oct 2018, Skukuza, South Africa. doi: 10.1117/12.2502509
Ghosh, S. ORCID: 0000-0002-1992-2289 & Rahman, B. M. ORCID: 0000-0001-6384-0961 (2019). Optical Bio-sensing with an Asymmetric Hybrid Plasmonic Mach-Zehnder Interferometer. Journal of Physics: Conference Series, 1151(1), doi: 10.1088/1742-6596/1151/1/012012
Ghosh, S. ORCID: 0000-0002-1992-2289 & Rahman, B. M. A. ORCID: 0000-0001-6384-0961 (2019). Design of On-chip Hybrid Plasmonic Mach-Zehnder Interferometer for Temperature and Concentration Detection of Chemical Solution. Sensors and Actuators B: Chemical, 279, pp. 490-502. doi: 10.1016/j.snb.2018.09.070
Giaralis, A. ORCID: 0000-0002-2952-1171, Pachakis, D. & Savvidis, R. (2019). Optimal seismic upgrade timing of seaports in high-capital cost and high-throughput growth environments using a real options approach. Paper presented at the 2nd International Conference on Natural Hazards & Infrastructure- ICONHIC 2019, 23 - 26 June 2019, Chania, Greece.
Giaralis, A. ORCID: 0000-0002-2952-1171, Taflanidis, A. & Patsialis, D. (2019). Multi-objective optimal design of inerter-based dampers for earthquake protection of buildings trading seismic performance to inerter force. Paper presented at the 2nd International Conference on Natural Hazards & Infrastructure- ICONHIC 2019, 23 - 26 June 2019, Chania, Greece.
Gkatzogias, K.I. & Kappos, A. J. ORCID: 0000-0002-5566-5021 (2019). Direct estimation of seismic response in reduced-degree-of-freedom isolation and energy dissipation systems. Earthquake Engineering and Structural Dynamics, 48(10), pp. 1112-1133. doi: 10.1002/eqe.3169
Gkoktsi, K. & Giaralis, A. ORCID: 0000-0002-2952-1171 (2019). A multi-sensor sub-Nyquist power spectrum blind sampling approach for low-power wireless sensors in operational modal analysis applications. Mechanical Systems and Signal Processing, 116, pp. 879-899. doi: 10.1016/j.ymssp.2018.06.049
Gkoktsi, K., Giaralis, A. ORCID: 0000-0002-2952-1171, Klis, R. P. , Dertimanis, V. & Chatzi, E. N. (2019). Output-Only Vibration-Based Monitoring of Civil Infrastructure via Sub-Nyquist/Compressive Measurements Supporting Reduced Wireless Data Transmission. Frontiers in Built Environment, 5, article number 111. doi: 10.3389/fbuil.2019.00111
Gold, M., Pearson, R., Turner, J. , Sykes, D., Stetsyuk, V., De Sercey, G., Crua, C., Koukouvinis, F. ORCID: 0000-0002-3945-3707 & Gavaises, M. ORCID: 0000-0003-0874-8534 (2019). Simulation and Measurement of Transient Fluid Phenomena within Diesel Injection. SAE Technical Papers, 1(1), pp. 291-305. doi: 10.4271/2019-01-0066
Gomez Santos, E., Shi, J., Gavaises, M. ORCID: 0000-0003-0874-8534 , Soteriou, C., Winterbourn, M. & Bauer, W. (2019). Investigation of cavitation and air entrainment during pilot injection in real-size multi-hole diesel nozzles. Fuel, 263, article number 116746. doi: 10.1016/j.fuel.2019.116746
Gong, W., Wei, Y., Li, Y. , Wang, Z., Zhang, T., Chang, J., Grattan, K. T. V. ORCID: 0000-0003-2250-3832 & Liu, T. (2019). Study of quasi-distributed optical fiber methane sensors based on laser absorption spectrometry. Proceedings of SPIE - The International Society for Optical Engineering, 11340, article number 1134020. doi: 10.1117/12.2548181
Gowree, E. R., Jagadeesh, C. & Atkin, C.J. (2019). Skin friction drag reduction over staggered three dimensional cavities. Aerospace Science and Technology, 84, pp. 520-529. doi: 10.1016/j.ast.2018.11.001
Grandal, T., Zornoza, A., Lopez, A. , Fraga, S., Sun, T. ORCID: 0000-0003-3861-8933 & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2019). Analysis of Fiber optic sensor embedding in metals by automatic and manual TIG welding. IEEE Sensors Journal, 19(17), pp. 7425-7433. doi: 10.1109/jsen.2019.2916639
Gulistan, A., Ghosh, S. ORCID: 0000-0002-1992-2289, Chugh, S. & Rahman, B. M. ORCID: 0000-0001-6384-0961 (2019). Air-holes induced multimodal fiber design to increase the effective index difference between higher order guided modes. Optical Fiber Technology, 53, article number 102023. doi: 10.1016/j.yofte.2019.102023
Gulistan, A., Rahman, M. M., Ghosh, S. ORCID: 0000-0002-1992-2289 & Rahman, B. M. ORCID: 0000-0001-6384-0961 (2019). Elimination of spurious modes in full-vectorial finite element method based acoustic modal solution. Optics Express, 27(8), pp. 10900-10911. doi: 10.1364/oe.27.010900
Guo, L., Liu, Y., Fu, F. ORCID: 0000-0002-9176-8159 & Huang, H. (2019). Behavior of axially loaded circular stainless steel tube confined concrete stub columns. Thin-Walled Structures, 139, pp. 66-76. doi: 10.1016/j.tws.2019.02.014
Guzmán-Iñigo, J. ORCID: 0000-0002-1833-6034, Sodar, M. A. & Papadakis, G. (2019). Data-based, reduced-order, dynamic estimator for reconstruction of nonlinear flows exhibiting limit-cycle oscillations. Physical Review Fluids, 4(11), article number 114703. doi: 10.1103/physrevfluids.4.114703
Guzmán-Iñigo, J. ORCID: 0000-0002-1833-6034, Yang, D., Johnson, H. G. & Morgans, A. S. (2019). Sensitivity of the Acoustics of Short Circular Holes with Bias Flow to Inlet Edge Geometries. AIAA Journal, 57(11), pp. 4835-4844. doi: 10.2514/1.j057996
Hada, S. L. & Rahman, B. M. A. ORCID: 0000-0001-6384-0961 (2019). Design of compact mode splitters using identical coupled waveguides with slots. OSA Continuum, 2(3), pp. 848-861. doi: 10.1364/osac.2.000848
Hashim, Z. Q. (2019). A bioimpedance - based re-configurable electrode method for early detection of arteriosclerosis indicators. (Unpublished Doctoral thesis, City, University of London)
Hashim, Z.Q., Constantinou, L. & Triantis, I. ORCID: 0000-0002-8900-781X (2019). Modelling Dynamically Re-sizeable Electrodes (DRE) for Targeted Transcutaneous Measurements in Impedance Plethysmography. IEEE Transactions on Biomedical Circuits and Systems, 14(1), pp. 104-112. doi: 10.1109/tbcas.2019.2959437
Hawxwell, DA & Tsavdaridis, K. D. (2019). Beam-to-beam eccentric end plate connections - Experimental comparison to fin plate and partial-depth end plate connections. Structures, 19, pp. 411-423. doi: 10.1016/j.istruc.2019.02.012
Hien Nguyen, T., Sun, T. ORCID: 0000-0003-3861-8933 & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2019). A turn-on fluorescence-based fibre optic sensor for the detection of cadmium. Proceedings of SPIE, 11199, article number 111991N. doi: 10.1117/12.2541332
Hu, J., Wei, Y., Zhang, H. , Meng, H., Jin, G., Liu, T., Sun, T. ORCID: 0000-0003-3861-8933 & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2019). Coal mine low power laser methane detection and alarm instrument. Proceedings of SPIE - The International Society for Optical Engineering, 11340, article number 113401M. doi: 10.1117/12.2548071
Husak, E., Kovacevic, A. ORCID: 0000-0002-8732-2242 & Karabegovic, I. (2019). Calculation of clearances in twin screw compressors. In: IOP Conference Series: Materials Science and Engineering. doi: 10.1088/1757-899X/604/1/012001
Iaria, D., Zhou, X., Al Zaili, J. ORCID: 0000-0003-4072-2107 , Zhang, Q., Xiao, G. & Sayma, A. I. (2019). Development of a Model for Performance Analysis of a Honeycomb Thermal Energy Storage for Solar Power Microturbine Applications. Energies, 12(20), article number 3968. doi: 10.3390/en12203968
Ituarte, I. F., Boddeti, N., Hassani, V. ORCID: 0009-0003-0289-2890 , Dunn, M. L. & Rosen, D. W. (2019). Design and additive manufacture of functionally graded structures based on digital materials. Additive Manufacturing, 30, article number 100839. doi: 10.1016/j.addma.2019.100839
Jagdale, Sudhir (2019). Integrated nonlinear modelling of floating wind turbine. (Unpublished Doctoral thesis, City, University of London)
Jia, M., Gao, S., Lu, D. , Fu, F. ORCID: 0000-0002-9176-8159 & Zhang, H. (2019). Collapse resistance assessment of bucklingrestrained braced steel frames using combined deterministic and probability analysis approach. Ingegneria Sismica, 36(3), pp. 67-94.
Jiang, W. & Rahman, B. M. A. ORCID: 0000-0001-6384-0961 (2019). Phase-matched multi-layer based polarisation-independent spot-size converter for silicon nanowire. Scientific Reports, 9(1), pp. 1-13. doi: 10.1038/s41598-019-48848-0
Jin, G., Meng, H., Liu, Z. , Wei, Y., Li, Y., Jiang, D., Zhang, H., Shi, Z., Sun, T. ORCID: 0000-0003-3861-8933, Grattan, K. T. V. ORCID: 0000-0003-2250-3832 & Liu, T. (2019). Research progress on coal mine laser methane sensor. Proceedings of SPIE - The International Society for Optical Engineering, 11340, article number 113401U. doi: 10.1117/12.2548138
Kabir, I. R. (2019). Modelling of Laser Surface Glazing for Metallic Materials by Finite Element Method. (Unpublished Doctoral thesis, City, University of London)
Karabağ, C. ORCID: 0000-0003-4424-0471, Jones, M. L., Peddie, C. J. , Weston, A. E., Collinson, L. M. & Reyes-Aldasoro, C. C. ORCID: 0000-0002-9466-2018 (2019). Segmentation and Modelling of the Nuclear Envelope of HeLa Cells Imaged with Serial Block Face Scanning Electron Microscopy. Journal of Imaging, 5(9), article number 75. doi: 10.3390/jimaging5090075
Karabağ, C. ORCID: 0000-0003-4424-0471, Jones, M. L., Peddie, C. J. , Weston, A. E., Collinson, L. M. & Reyes-Aldasoro, C. C. ORCID: 0000-0002-9466-2018 (2019). Segmentation and modelling of hela nuclear envelope. 2019 IEEE 16th International Symposium on Biomedical Imaging (ISBI 2019), pp. 1510-1513. doi: 10.1109/ISBI.2019.8759151
Karabağ, C. ORCID: 0000-0003-4424-0471, Verhoeven, J. ORCID: 0000-0002-0738-8517, Miller, N. & Reyes-Aldasoro, C. C. ORCID: 0000-0002-9466-2018 (2019). Texture Segmentation: An Objective Comparison between Five Traditional Algorithms and a Deep-Learning U-Net Architecture. Applied Sciences, 9(18), article number 3900. doi: 10.3390/app9183900
Karabağ, C. ORCID: 0000-0003-4424-0471, Verhoeven, J. ORCID: 0000-0002-0738-8517, Miller, N. & Reyes-Aldasoro, C. C. ORCID: 0000-0002-9466-2018 (2019). Texture Segmentation: An Objective Comparison between Traditional and Deep-Learning Methodologies. Preprints, doi: 10.20944/preprints201908.0001.v1
Karathanassis, I. K. ORCID: 0000-0001-9025-2866, Koukouvinis, F. ORCID: 0000-0001-9025-2866 & Gavaises, E. ORCID: 0000-0003-0874-8534 (2019). Multiphase phenomena in Diesel fuel injection systems. In: Simulations and Optical Diagnostics for Internal Combustion Engines. Energy, Environment, and Sustainability. (pp. 95-126). Singapore: Springer. doi: 10.1007/978-981-15-0335-1_8
Karathanassis, I. K. ORCID: 0000-0001-9025-2866, Papanicolaou, E., Belessiotis, V. & Bergeles, G. (2019). Dynamic simulation and exergetic optimization of a Concentrating Photovoltaic/ Thermal (CPVT) system. Renewable Energy, 135, pp. 1035-1047. doi: 10.1016/j.renene.2018.12.085
Karathanassis, I. K. ORCID: 0000-0001-9025-2866, Pashkovski, E., Heidari-Koochi, M. , Jadidbonab, H. ORCID: 0000-0002-5481-9789, Smith, T., Gavaises, M. ORCID: 0000-0003-0874-8534 & Bruecker, C. ORCID: 0000-0001-5834-3020 (2019). Non-Newtonian flow of highly-viscous oils in hydraulic components. Journal of Non-Newtonian Fluid Mechanics, 275, article number 104221. doi: 10.1016/j.jnnfm.2019.104221
Kather, J. N., Krisam, J., Charoentong, P. , Luedde, T., Herpel, E., Weis, C. A., Gaiser, T., Marx, A., Valous, N. A., Ferber, D., Jansen, L., Reyes-Aldasoro, C. C. ORCID: 0000-0002-9466-2018, Zörnig, I., Jäger, D., Brenner, H., Chang-Claude, J., Hoffmeister, M. & Halama, N. (2019). Predicting survival from colorectal cancer histology slides using deep learning: A retrospective multicenter study. PLoS Med, 16(1), article number e1002730. doi: 10.1371/journal.pmed.1002730
Kechagias-Stamatis, O. & Aouf, N. ORCID: 0000-0001-9291-4077 (2019). Fusing Deep Learning and Sparse Coding for SAR ATR. IEEE Transactions on Aerospace and Electronic Systems, 55(2), pp. 785-797. doi: 10.1109/taes.2018.2864809
Kechagias-Stamatis, O. & Aouf, N. ORCID: 0000-0001-9291-4077 (2019). H∞ LIDAR odometry for spacecraft relative navigation. IET Radar, Sonar & Navigation, 13(5), pp. 771-775. doi: 10.1049/iet-rsn.2018.5354
Kechagias-Stamatis, O. & Aouf, N. ORCID: 0000-0001-9291-4077 (2019). A New Passive 3-D Automatic Target Recognition Architecture for Aerial Platforms. IEEE Transactions on Geoscience and Remote Sensing, 57(1), pp. 406-415. doi: 10.1109/tgrs.2018.2855065
Kechagias-Stamatis, O., Aouf, N. ORCID: 0000-0001-9291-4077 & Richardson, M. A. (2019). High-speed multi-dimensional relative navigation for uncooperative space objects. Acta Astronautica, 160, pp. 388-400. doi: 10.1016/j.actaastro.2019.04.050
Khoshkalam, N., Mojaddam, M. & Pullen, K. R. ORCID: 0000-0001-8501-9226 (2019). Characterization of the Performance of a Turbocharger Centrifugal Compressor by Component Loss Contributions. Energies, 12(14), article number 2711. doi: 10.3390/en12142711
Kim, J. H., Choi, K. S., Lacagnina, G. , Joseph, P., Hasheminejad, S. M., Chong, T. P., Shahab, M. F., Omidyeganeh, M. ORCID: 0000-0002-4140-2810 & Pinelli, A. ORCID: 0000-0001-5564-9032 (2019). Optimization of leading-edge undulation of a NACA 65(12)-10 aerofoil for noise reduction and aerodynamic enhancement. In: Proceedings of the 23rd International Congress on Acoustics : integrating 4th EAA Euroregio 2019 : 9-13 September 2019 in Aachen, Germany. (pp. 5351-5358). Berlin: Deutsche Gesellschaft für Akustik. doi: 10.18154/RWTH-CONV-239781
Kong, D. & Fonseca, J. ORCID: 0000-0002-7654-6005 (2019). On the kinematics of shelly carbonate sand using X-ray micro tomography. Engineering Geology, 261, article number 105268. doi: 10.1016/j.enggeo.2019.105268
Kong, L., Jin, G., Meng, H. , Dong, Y., Wang, J., Liu, T., Sun, T. ORCID: 0000-0003-3861-8933 & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2019). Research on VCSEL interference analysis and elimination method. Proceedings of SPIE - The International Society for Optical Engineering, 11340, article number 113401W. doi: 10.1117/12.2548147
Krishnasamy, J., Ponnusami, S. A. ORCID: 0000-0002-2143-8971, Turteltaub, S. & van der Zwaag, S. (2019). Computational investigation of porosity effects on fracture behavior of thermal barrier coatings. Ceramics International, 45(16), pp. 20518-20527. doi: 10.1016/j.ceramint.2019.07.031
Krishnasamy, J., Ponnusami, S. A. ORCID: 0000-0002-2143-8971, Turteltaub, S. & van der Zwaag, S. (2019). Numerical Investigation into the Effect of Splats and Pores on the Thermal Fracture of Air Plasma-Sprayed Thermal Barrier Coatings. Journal of Thermal Spray Technology, 28(8), pp. 1881-1892. doi: 10.1007/s11666-019-00949-y
Kumar, N., Khader, A., Pai, R. , Kyriacou, P. A. ORCID: 0000-0002-2868-485X, Khan, S. ORCID: 0000-0001-5589-6914 & Koteshwara, P. (2019). Computational fluid dynamic study on effect of Carreau-Yasuda and Newtonian blood viscosity models on hemodynamic parameters. Journal of Computational Methods in Sciences and Engineering, 19(2), pp. 465-477. doi: 10.3233/jcm-181004
Kumar, R., Binetti, L., Nguyen, H. T. , Alwis, L. S. M., Agrawal, A., Sun, T. ORCID: 0000-0003-3861-8933 & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2019). Determination of the Aspect-ratio Distribution of Gold Nanorods in a Colloidal Solution using UV-visible absorption spectroscopy. Scientific Reports, 9(1), pp. 1-10. doi: 10.1038/s41598-019-53621-4
Kyriacou, P. ORCID: 0000-0002-2868-485X, Budidha, K. ORCID: 0000-0002-6329-8399 & Abay, T. Y. (2019). Optical Techniques for Blood and Tissue Oxygenation. In: Narayan, R. (Ed.), Encyclopedia of Biomedical Engineering. (pp. 461-472). Elsevier. doi: 10.1016/b978-0-12-801238-3.10886-4
Kyriazis, N., Koukouvinis, F. ORCID: 0000-0002-3945-3707 & Gavaises, E. ORCID: 0000-0003-0874-8534 (2019). Numerical investigations on bubble-induced jetting and shock wave focusing: application on a needle-free injection. Proeceedings of the Royal Society A, 475(2222), article number 20180548. doi: 10.1098/rspa.2018.0548
Lacagnina, G., Chaitanya, P., Berk, T. , Kim, J-H., Joseph, P., Ganapathisubramani, B., Hasheminejad, S. M., Chong, T. P., Stalnov, O., Choi, K-S., Shahab, M. F., Omidyeganeh, M. ORCID: 0000-0002-4140-2810 & Pinelli, A. ORCID: 0000-0001-5564-9032 (2019). Mechanisms of airfoil noise near stall conditions. Physical Review Fluids, 4(12), article number 123902. doi: 10.1103/physrevfluids.4.123902
Laria, D. (2019). Techno-economic assessment of a solar dish micro gas turbine system. (Unpublished Doctoral thesis, City, University of London)
Le, B., Goodey, R.J. & Divall, S. ORCID: 0000-0001-9212-5115 (2019). Subsurface ground movements due to circular shaft construction. Soils and Foundations, 59(5), pp. 1160-1171. doi: 10.1016/j.sandf.2019.03.013
Lei, W., Song, Z., Yi, J. , Li, J., Fu, F. ORCID: 0000-0002-9176-8159 & Qian, K. (2019). Experimental Studies on Bond Performance of BFRP bars reinforced Coral Aggregate Concrete. International Journal of Concrete Structures and Materials, 13(1), article number 52. doi: 10.1186/s40069-019-0367-7
Li, Q. ORCID: 0000-0001-7456-7868 & Bruecker, C. ORCID: 0000-0001-5834-3020 (2019). Comparative study of wall shear stress at the ascending aorta for different mechanical heart valve prostheses. Journal of Biomechanical Engineering, 142(1), article number 011006. doi: 10.1115/1.4043357
Li, R., Yang, X., Liu, T. , Zhang, S., Wang, J., Hou, M., Grattan, K. T. V. ORCID: 0000-0003-2250-3832 & Sun, T. ORCID: 0000-0003-3861-8933 (2019). Application of fiber optic sensors for vibration and ignition monitoring of a belt conveyor system. Proceedings of SPIE - The International Society for Optical Engineering, 11340, article number 113401Z. doi: 10.1117/12.2548165
Li, S., Zhang, A-M., Han, R. & Ma, Q. ORCID: 0000-0001-5579-6454 (2019). 3D full coupling model for strong interaction between a pulsating bubble and a movable sphere. Journal of Computational Physics, 392, pp. 713-731. doi: 10.1016/j.jcp.2019.05.001
Liu, F., Lai, Y., Zhao, B. , Bradley, R. & Wu, W. ORCID: 0000-0003-1462-6402 (2019). Photothermal materials for efficient solar powered steam generation. Frontiers of Chemical Science and Engineering, 13(4), pp. 636-653. doi: 10.1007/s11705-019-1824-1
Liu, F., Wang, L., Bradley, R. , Zhao, B. & Wu, W. ORCID: 0000-0003-1462-6402 (2019). Highly efficient solar seawater desalination with environmentally friendly hierarchical porous carbons derived from halogen-containing polymers. RSC Advances, 9(50), pp. 29414-29423. doi: 10.1039/c9ra05637h
Liu, J., Silveira, J., Groarke, R. , Parab, S., Singh, H., McCarthy, E., Karazi, S., Mussatto, A., Houghtaling, J., Ahad, I. U., Naher, S. ORCID: 0000-0003-2047-5807 & Brabazon, D. (2019). Effect of powder metallurgy synthesis parameters for pure aluminium on resultant mechanical properties. International Journal of Material Forming, 12(1), pp. 79-87. doi: 10.1007/s12289-018-1408-5
Liu, Q., He, X., Qiao, X. , Sun, T. ORCID: 0000-0003-3861-8933 & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2019). Design and Modeling of a High Sensitivity Fiber Bragg Grating-Based Accelerometer. IEEE Sensors Journal, 19(14), pp. 5439-5445. doi: 10.1109/jsen.2019.2904218
Liu, Y., Zhang, X., Lemanski, S. , Yazdani Nezhad, H. ORCID: 0000-0003-0832-3579 & Ayre, D. (2019). Experimental and numerical study of process-induced defects and their effect on fatigue debonding in composite joints. International Journal of Fatigue, 125, pp. 47-57. doi: 10.1016/j.ijfatigue.2019.03.033
Lockett, R. D. ORCID: 0000-0002-7883-6241 & Bonifacio, A. (2019). Hydrodynamic Luminescence in a Model Diesel Injector Return Valve. International Journal of Engine Research, 22(3), pp. 963-974. doi: 10.1177/1468087419870421
Lu, W. (2019). Thermo-mechanical damage modelling for collapse assessment of steel buildings under blast and fire loads. (Unpublished Doctoral thesis, City, University of London)
Lu, Y., Kovacevic, A. ORCID: 0000-0002-8732-2242, Read, M. G. ORCID: 0000-0002-7753-2457 & Basha, N (2019). Numerical study of customised mesh for twin screw vacuum pumps. Designs, 3(4), article number 52. doi: 10.3390/designs3040052
Makri, K., Lockett, R. D. ORCID: 0000-0002-7883-6241 & Jeshani, M. (2019). Dynamics of Post-Injection Fuel Flow in Mini-Sac Diesel Injectors Part 1: Admission of 1 External Gases and Implications for Deposit Formation. International Journal of Engine Research, 22(4), pp. 1133-1153. doi: 10.1177/1468087419895425
Maloku, H., Fazliu, Z. L., Ibrani, M. , Mekuli, A., Sela, E. & Rajarajan, M. (2019). Measurement of frequency occupancy levels in TV bands in urban environment in Kosovo. In: 2018 18th Mediterranean Microwave Symposium (MMS). 2018 18th Mediterranean Microwave Symposium (MMS), 31 October - 02 Nov 2018, Istanbul, Turkey. doi: 10.1109/MMS.2018.8612014
Mamouei, M. H., Qassem, M., Budidha, K. ORCID: 0000-0002-6329-8399 , Baishya, N., Vadgama, P. & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2019). Comparison of a Genetic Algorithm Variable Selection and Interval Partial Least Squares for quantitative analysis of lactate in PBS. 2019 41st Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), pp. 3239-3242. doi: 10.1109/embc.2019.8856765
Maraveas, C. & Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 (2019). Assessment and retrofitting of an existing steel structure subjected to wind-induced failure analysis. Journal of Building Engineering, 23, pp. 53-67. doi: 10.1016/j.jobe.2019.01.005
Margnelli, A. (2019). Influence quantification of non-stationary frequency content of earthquake ground motions to performance-based earthquake engineering. (Unpublished Doctoral thesis, City, University of London)
Mateo, D., Horsevad, N., Hassani, V. ORCID: 0009-0003-0289-2890 , Chamanbaz, M. & Bouffanais, R. (2019). Optimal network topology for responsive collective behavior. Science Advances, 5(4), doi: 10.1126/sciadv.aau0999
Mathivanan, Sathya Narayanan (2019). Finite element characterisation of graphene-silicon hybrid waveguides. (Unpublished Doctoral thesis, City, University of London)
May, J.M., Phillips, J. P., Fitchat, T. , Ramaswamy, S., Snidvongs, S. & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2019). A Novel Photoplethysmography Sensor for Vital Signs Monitoring from the Human Trachea. Biosensors, 9(4), article number 119. doi: 10.3390/bios9040119
May, J.M., Phillips, J. P. ORCID: 0000-0003-3486-3704, Snidvongs, S. & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2019). The Sensing Endotracheal Tube. In: 2019 41st Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC). 2019 41st Annual International Conference of the IEEE Engineering in Medicine & Biology Society (EMBC, 23 - 27 July 2019, Berlin, Germany. doi: 10.1109/EMBC.2019.8856662
Mazzanti, G., Castellon, J., Chen, G. , Fothergill, J., Fu, M., Hozumi, N., Lee, J. H., Li, J., Marzinotto, M., Mauseth, F., Morshuis, P., Reed, C., Troia, I., Tzimas, A. & Wu, K. (2019). The Insulation of HVDC Extruded Cable System Joints. Part 2: Proposal of a New AC Voltage PD Measurement Protocol for Quality Control during Routine Tests. IEEE Transactions on Dielectrics and Electrical Insulation, 26(3), pp. 973-980. doi: 10.1109/tdei.2019.007917
Meng, H., Jin, G., Jia, G. , Wang, W., Zhang, H., Jiang, D., Shi, Z., Liu, T., Sun, T. ORCID: 0000-0003-3861-8933 & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2019). Application and research of wireless laser methane sensor in drainage pipeline monitoring. Proceedings of SPIE - The International Society for Optical Engineering, 11340, article number 113401Q. doi: 10.1117/12.2548125
Mergos, P.E. ORCID: 0000-0003-3817-9520 (2019). Minimum cost performance-based seismic design of reinforced concrete frames with pushover and nonlinear response-history analysis. Structural Concrete, 21(2), pp. 599-609. doi: 10.1002/suco.201900211
Mergos, P.E. ORCID: 0000-0003-3817-9520 (2019). Sustainable seismic design of RC frames with structural optimisation techniques. Paper presented at the ociety for Earthquake and Civil Engineering Dynamics (SECED) 2019 Conference, 9-10 Sep 2019, London, UK.
Mergos, P.E. ORCID: 0000-0003-3817-9520 & Sextos, A. (2019). Selection of earthquake ground motions for multiple objectives using genetic algorithms. Engineering Structures, 187, pp. 414-427. doi: 10.1016/j.engstruct.2019.02.067
Miah, S., Kaparias, I., Ayub, N. , Milonidis, E. & Holmes, W. (2019). Measuring cycle riding comfort in Southampton using an instrumented bicycle. In: 6th International Conference on Models and Technologies for Intelligent Transportation Systems (MT-ITS). . IEEE. doi: 10.1109/MTITS.2019.8883328
Miller, N., Reyes-Aldasoro, C. C. ORCID: 0000-0002-9466-2018 & Verhoeven, J. ORCID: 0000-0002-0738-8517 (2019). Asymmetries in tongue-palate contact during speech. In: Calhoun, S., Escudero, P., Tabin, M. & Warren, P. (Eds.), Proceedings of the 19th International Congress of Phonetic Sciences. ICPhS 2019, 5-9 Aug 2019, Melbourne, Australia.
Mintz, B., Qaban, A. ORCID: 0000-0003-2982-8429, Bendke, P. & Naher, S. ORCID: 0000-0003-2047-5807 (2019). The influence of a high aluminium addition on the strength and impact behaviour of hot-rolled Nb containing steels. Materials Science and Technology, 36(2), pp. 233-244. doi: 10.1080/02670836.2019.1701272
Mojaddam, M. & Pullen, K. R. ORCID: 0000-0001-8501-9226 (2019). Optimization of a Centrifugal Compressor Using the Design of Experiment Technique. Applied Sciences, 9(2), article number 291. doi: 10.3390/app9020291
Monti, A (2019). High-fidelity simulations of fully submerged, rigid canopy flows. (Unpublished Doctoral thesis, City, University of London)
Monti, A., Omidyeganeh, M. ORCID: 0000-0002-4140-2810 & Pinelli, A. ORCID: 0000-0001-5564-9032 (2019). Large-eddy simulation of an open-channel flow bounded by a semi-dense rigid filamentous canopy: Scaling and flow structure. Physics of Fluids, 31(6), pp. 1-14. doi: 10.1063/1.5095770
Moreno-Ramirez, C., Tomas-Rodriguez, M. ORCID: 0000-0001-9630-9579 & Evangelou, S. A. (2019). Effects of interconnected suspension systems on the dynamics of sport motorcycles. Paper presented at the Bicycle and Motorcycle Dynamics 2019 Symposium on the Dynamics and Control of Single Track Vehicles, 09 - 11 September 2019, University of Padova, Italy.
Moustakidis, S ORCID: 0000-0002-1090-2177, Meintanis, I. ORCID: 0000-0002-1920-1801, Halikias, G. ORCID: 0000-0003-1260-1383 & Karcanias, N. ORCID: 0000-0002-1889-6314 (2019). An Innovative Control Framework for District Heating Systems: Conceptualisation and Preliminary Results. Resources, 8(1), article number 27. doi: 10.3390/resources8010027
Moustakidis, S. ORCID: 0000-0002-1090-2177, Meintanis, I., Karkanias, N. , Halikias, G. ORCID: 0000-0003-1260-1383, Saoutieff, E., Gasnier, P., Ojer-Aranguren, J., Anagnostis, A., Marciniak, B., Rodot, I., Lezak, E., Pluta, J., Penev, M., Jäppinen, H., Petit, S., Krajnc, M., Kouvaris, K. & Eleftheriou, A. (2019). Innovative Technologies for District Heating and Cooling: InDeal Project. Proceedings, 93(1), doi: 10.3390/proceedings2019005001
Murali-Girija, M., Koukouvinis, F. ORCID: 0000-0002-3945-3707, Karathanassis, I. K. ORCID: 0000-0001-9025-2866 & Gavaises, M. ORCID: 0000-0003-0874-8534 (2019). Numerical simulation of three-phase flow in an external gear pump using immersed boundary approach. Applied Mathematical Modelling, 72, pp. 682-699. doi: 10.1016/j.apm.2019.03.022
Muthuramalingam, M. & Bruecker, C. ORCID: 0000-0001-5834-3020 (2019). Seal and Sea lion Whiskers Detect Slips of Vortices Similar as Rats Sense Textures. Scientific Reports, 9(1), pp. 1-15. doi: 10.1038/s41598-019-49243-5
Muthuramalingam, M., Villemin, L. S. & Bruecker, C. ORCID: 0000-0001-5834-3020 (2019). Streak formation in flow over biomimetic fish scale arrays. The Journal of Experimental Biology, 222(16), pp. 1-11. doi: 10.1242/jeb.205963
Nadimi, S. & Fonseca, J. ORCID: 0000-0002-7654-6005 (2019). Image based simulation of one-dimensional compression tests on carbonate sand. Meccanica, 54(4-5), pp. 697-706. doi: 10.1007/s11012-018-0923-2
Nadimi, S. & Fonseca, J. ORCID: 0000-0002-7654-6005 (2019). Image based simulation of one-dimensional compression tests on carbonate sand. In: Micro to MACRO Mathematical Modelling in Soil Mechanics. micro to MACRO Mathematical Modelling in Soil Mechanics, 29 May - 1 Jun 2018, Calabria, Italy.
Nadimi, S. & Fonseca, J. ORCID: 0000-0002-7654-6005 (2019). A laboratory-based technique for grain size and shape characterisation. In: Proceedings of the XVII European Conference on Soil Mechanics and Geotechnical Engineering, Reykjavík, Iceland. The XVII European Conference on Soil Mechanics and Geotechnical Engineering, 1-6 Sep 2019, Reykjavik, Iceland.
Nadimi, S., Fonseca, J. ORCID: 0000-0002-7654-6005, Andò, E. & Viggiani, G. (2019). A micro finite element model for soil behaviour: experimental evaluation for sand under triaxial compression. Géotechnique, 70(10), pp. 931-936. doi: 10.1680/jgeot.18.t.030
Nadimi, S., Otsubo, M., Fonseca, J. ORCID: 0000-0002-7654-6005 & O'Sullivan, C. (2019). Numerical modelling of rough particle contacts subject to normal and tangential loading. Granular Matter, 21(4), article number 108. doi: 10.1007/s10035-019-0970-y
Naseri, Homa (2019). Modelling of nozzle cavitation in newtonian and viscoelastic fluids. (Unpublished Doctoral thesis, City, University of London)
Nazeer, Y. H., Ehmann, M., Koukouvinis, P. ORCID: 0000-0002-3945-3707 & Gavaises, M. ORCID: 0000-0003-0874-8534 (2019). The Influence of geometrical and operational parameters on internal flow characteristics of Internally Mixing Twin-Fluid Y-Jet Atomizers. Atomization and Sprays, 29(5), pp. 403-428. doi: 10.1615/atomizspr.2019030944
Nguyen, T. H., Sun, T. ORCID: 0000-0003-3861-8933 & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2019). A Turn-On Fluorescence-Based Fibre Optic Sensor for the Detection of Mercury. Sensors, 19(9), article number 2142. doi: 10.3390/s19092142
Nikolić, B. & Khan, S. ORCID: 0000-0001-5589-6914 (2019). Modelling and optimisation of design of non-conventional instrument transformers. Journal of Physics: Conference Series, 1379(1), article number 12057. doi: 10.1088/1742-6596/1379/1/012057
Nomoni, M., Kyriacou, P. A. & May, J.M. ORCID: 0000-0002-8659-756X (2019). A Pulsatile Optical Tissue Phantom for the Investigation of Light-Tissue Interaction in Reflectance Photoplethysmography. In: 2019 41st Annual International Conference of the IEEE Engineering in Medicine & Biology Society (EMBC). 41st Annual International Conference of the IEEE Engineering in Medicine and Biology Society, 23 - 27 July 2019, Berlin, Germany. doi: 10.1109/EMBC.2019.8857036
Nouri, J. M. ORCID: 0000-0001-8610-3737, Guerrato, D. & Stosic, N. (2019). Turbulent Flow Measurements near the Discharge Port of a Screw Compressor. Flow, Turbulence and Combustion, 104(4), pp. 927-946. doi: 10.1007/s10494-019-00080-6
Nouri, J. M. ORCID: 0000-0001-8610-3737, Stosic, N. & Guerrato, D. (2019). Investigation of turbulent flow characteristics within screw compressor. In: 4th International Conference on Multi-scale Computational Methods for Solids and Fluids. 4th International Conference on Computational Methods for Solids and Fluids, 18-20 Sep 2019, Sarajevo, Bosnia and Herzegovina.
Nouri, J. M. ORCID: 0000-0001-8610-3737, Vasilakos, I., Yan, Y. ORCID: 0000-0003-1124-4724 & Reyes-Aldasoro, C. C. ORCID: 0000-0002-9466-2018 (2019). Effect of Viscosity and Speed on Oil Cavitation Development in a Single Piston-Ring Lubricant Assembly. Lubricants, 7(10), article number 88. doi: 10.3390/lubricants7100088
Nykteri, G., Koukouvinis, P. ORCID: 0000-0002-3945-3707, Gonzalez Avila, S. R. , Ohl, C-D. & Gavaises, M. ORCID: 0000-0003-0874-8534 (2019). Numerical investigation of high-speed droplet impact using a multiscale two-fluid approach. In: https://ilass19.sciencesconf.org/browse/author?authorid=678696. 29th European Conference on Liquid Atomization and Spray Systems, 2-4 Sep 2019, Paris, France.
Panchal, J. P., McNamara, A. M. ORCID: 0000-0002-3452-0800, Halai, H. & Divall, S. ORCID: 0000-0001-9212-5115 (2019). Centrifuge modelling to determine the influence of pile stiffness on pile capacity. In: Proceedings of the XVII European Conference on Soil Mechanics and Geotechnical Engineering. ECSMGE - 2019. XVII European Conference on Soil Mechanics and Geotechnical Engineering, 1 - 6 September 2019, Reykjavik, Iceland.
Papkov, S.O. & Banerjee, J. R. (2019). Dynamic stiffness formulation and free vibration analysis of specially orthotropic Mindlin plates with arbitrary boundary conditions. Journal of Sound and Vibration, 458, pp. 522-543. doi: 10.1016/j.jsv.2019.06.028
Patel, Z., Chatterjee, S. ORCID: 0000-0002-7735-6123, Thaha, M. A. & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2019). A Multilayer Monte Carlo Model for the Investigation of Optical Path and Penetration Depth at Different Perfusion States of the Colon. 2019 41st Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), 2019, pp. 75-78. doi: 10.1109/EMBC.2019.8856763
Pathak, A. K., Ghosh, S. ORCID: 0000-0002-1992-2289, Gangwar, R. K. , Rahman, B. M. A. ORCID: 0000-0001-6384-0961 & Singh, V. (2019). Metal Nanowire Assisted Hollow Core Fiber Sensor for an Efficient Detection of Small Refractive Index Change of Measurand Liquid. Plasmonics, 14(6), pp. 1823-1830. doi: 10.1007/s11468-019-00969-y
Pathak, A. K., Rahman, B. M. ORCID: 0000-0001-6384-0961, Singh, V. K. & Kumari, S. (2019). Sensitivity Enhancement of a Concave Shaped Optical Fiber Refractive Index Sensor Covered with Multiple Au Nanowires. Sensors (Basel), 19(19), article number 4210. doi: 10.3390/s19194210
Pathak, A. K., Singh, V. K., Ghosh, S. ORCID: 0000-0002-1992-2289 & Rahman, B. M. A. (2019). Investigation of a SPR based refractive index sensor using a single mode fiber with a large D shaped microfluidic channel. OSA Continuum, 2(11), pp. 3008-3018. doi: 10.1364/osac.2.003008
Pathan, M. V., Ponnusami, S. A. ORCID: 0000-0002-2143-8971, Pathan, J. , Pitisongsawat, R., Erice, B., Petrinic, N. & Tagarielli, V. L. (2019). Predictions of the mechanical properties of unidirectional fibre composites by supervised machine learning. Scientific Reports, 9(1), article number 13964. doi: 10.1038/s41598-019-50144-w
Pazhakh, V., Ellett, F., Croker, B. A. , O'Donnell, J. A., Pase, L., Schulze, K. E., Greulich, R. S., Gupta, A., Reyes-Aldasoro, C. C. ORCID: 0000-0002-9466-2018, Andrianopoulos, A. & Lieschke, G. J. (2019). β-glucan-dependent shuttling of conidia from neutrophils to macrophages occurs during fungal infection establishment. PLoS Biology, 17(9), article number e3000113. doi: 10.1371/journal.pbio.3000113
Ponnusami, S. A. ORCID: 0000-0002-2143-8971, Gupta, M. & Harursampath, D. (2019). Asymptotic Modeling of Nonlinear Bending and Buckling Behavior of Carbon Nanotubes. AIAA Journal, 57(10), pp. 4132-4140. doi: 10.2514/1.j057564
Ponnusami, S. A. ORCID: 0000-0002-2143-8971, Krishnasamy, J., Turteltaub, S. & van der Zwaag, S. (2019). A micromechanical fracture analysis to investigate the effect of healing particles on the overall mechanical response of a self-healing particulate composite. Fatigue and Fracture of Engineering Materials and Structures, 42(2), pp. 533-545. doi: 10.1111/ffe.12929
Pullen, K. R. ORCID: 0000-0001-8501-9226 (2019). The Status and Future of Flywheel Energy Storage. Joule, 3(6), pp. 1394-1399. doi: 10.1016/j.joule.2019.04.006
Qaban, A. (2019). The effect of alloying composition and cooling rate on the hot ductility of TWIP steel and mechanical properties of hot rolled HSLA steel. (Unpublished Doctoral thesis, City, University of London)
Qaban, A. ORCID: 0000-0003-2982-8429 & Naher, S. ORCID: 0000-0003-2047-5807 (2019). Evaluation of Toughness of High Strength Low Alloy (HSLA) Steels as a Function of Carbon Content. International Journal of Mechanical and Production Engineering (IJMPE), 7(5), pp. 53-56.
Qaban, A. ORCID: 0000-0003-2982-8429 & Naher, S. ORCID: 0000-0003-2047-5807 (2019). Investigation of corrosion resistance of high-strength low-alloy (HSLA) steel in fresh and salt water for pipeline application. AIP Conference Proceedings, 2146, article number 20021. doi: 10.1063/1.5123708
Qassem, M. ORCID: 0000-0003-0730-3189, Constantinou, L., Triantis, I. ORCID: 0000-0002-8900-781X , Hickey, M., Palazidou, E. & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2019). A Method for Rapid, Reliable, and Low-Volume Measurement of Lithium in Blood for Use in Bipolar Disorder Treatment Management. IEEE Transactions on Biomedical Engineering, 66(1), pp. 130-137. doi: 10.1109/tbme.2018.2836148
Qassem, M. & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2019). Review of Modern Techniques for the Assessment of Skin Hydration. Cosmetics, 6(1), article number 19. doi: 10.3390/cosmetics6010019
Qian, K., Liang, S-L., Fu, F. ORCID: 0000-0002-9176-8159 & Fang, Q. (2019). Progressive Collapse Resistance of Precast Concrete Beam-Column Sub-assemblages with High-Performance Dry Connections. Engineering Structures, 198, article number 109552. doi: 10.1016/j.engstruct.2019.109552
Qian, K., Zhang, X-D., Fu, F. ORCID: 0000-0002-9176-8159 & Li, B. (2019). Progressive Collapse Resisting Mechanisms of Planar Prestressed Concrete Frame. ACI Structural Journal, 116(4), pp. 77-90. doi: 10.14359/51715567
Rahman, B. M. A. ORCID: 0000-0001-6384-0961 & Jiang, W. (2019). Design and optimization of compact spot-size converters for silicon photonic devices. Proceedings of SPIE, 10922, article number 109221R. doi: 10.1117/12.2513193
Rahulamathavan, Y., Sutharsini, K. R., Ray, I. G. , Lu, R. & Rajarajan, M. (2019). Privacy-Preserving iVector-Based Speaker Verification. IEEE/ACM Transactions on Audio, Speech, and Language Processing, 27(3), pp. 496-506. doi: 10.1109/taslp.2018.2882731
Rane, S, Kovačević, A & Stošić, N (2019). Grid generation for CFD analysis and design of a variety of twin screw machines. Designs, 3(2), doi: 10.3390/designs3020030
Ransley, E., Yan, S. ORCID: 0000-0001-8968-6616, Brown, S. A. , Mai, T., Graham, D., Ma, Q., Musiedlak, P-H., Engsig-Karup, A. P., Eskilsson, C., Li, Q., Wang, J., Xie, Z., Venkatachalam, S., Stoesser, T., Zhuang, Y., Li, Q., Wan, D., Chen, G., Chen, H., Qian, L., Ma, Z., Mingham, C., Causon, D., Gatin, I., Jasak, H., Vukcevic, V., Downie, S., Higuera, P., Buldakov, E., Stagonas, D., Chen, Q., Zang, J. & Greaves, D. (2019). A Blind Comparative Study of Focused Wave Interactions with a Fixed FPSO-like Structure (CCP-WSI Blind Test Series 1). International Journal of Offshore and Polar Engineering, 29(2), pp. 113-127. doi: 10.17736/ijope.2019.jc748
Rao, K. R., Ray, I. G., Asif, W. , Nayak, A. & Rajarajan, M. (2019). R-PEKS: RBAC Enabled PEKS for Secure Access of Cloud Data. IEEE ACCESS, 7, pp. 133274-133289. doi: 10.1109/access.2019.2941560
Read, M. G. ORCID: 0000-0002-7753-2457, Smith, I. K. ORCID: 0000-0003-1524-9880 & Stosic, N. (2019). Geometrical Comparison of Conventional and Gerotor-Type Positive Displacement Screw Machines. IOP Conference Series: Materials Science and Engineering, 604(1), article number 1. doi: 10.1088/1757-899X/604/1/011011
Reitz, R. D., Ogawa, H., Payri, R. , Fansler, T., Kokjohn, S., Moriyoshi, Y., Agarwal, A. K., Arcoumanis, D., Assanis, D., Bae, C., Boulouchos, K., Canakci, M., Curran, S., Denbratt, I., Gavaises, M. ORCID: 0000-0003-0874-8534, Guenthner, M., Hasse, C., Huang, Z., Ishiyama, T., Johansson, B., Johnson, T. V., Kalghatgi, G., Koike, M., Kong, S. C., Leipertz, A., Miles, P., Novella, R., Onorati, A., Richter, M., Shuai, S., Siebers, D., Su, W., Trujillo, M., Uchida, N., Vaglieco, B. M., Wagner, R. M. & Zhao, H. (2019). IJER editorial: The future of the internal combustion engine. International Journal of Engine Research, 21(1), pp. 3-10. doi: 10.1177/1468087419877990
Rijas, A. S., Sriram, V. & Yan, S. ORCID: 0000-0001-8968-6616 (2019). Variable Spaced Particle in Meshfree Method to handle wave‐floating body interactions. International Journal for Numerical Methods in Fluids, 91(6), pp. 263-286. doi: 10.1002/fld.4751
Rodriguez, C., Rokni, H., Koukouvinis, F. ORCID: 0000-0002-3945-3707 , Gupta, A. & Gavaises, M. ORCID: 0000-0003-0874-8534 (2019). Complex multicomponent real fluid thermodynamic model for high pressure Diesel fuel injection. Fuel, 257, article number 115888. doi: 10.1016/j.fuel.2019.115888
Rodriguez, C., Rokni, H. B., Koukouvinis, P. ORCID: 0000-0002-3945-3707 , Gupta, A. & Gavaises, M. ORCID: 0000-0003-0874-8534 (2019). CFD simulation of pseudo-diesel injections at high-load conditions employing the PC-SAFT EoS and VLE calculations. Paper presented at the ILASS–Europe 2019, 29th Conference on Liquid Atomization and Spray Systems, 2 - 4 September 2019, Paris, France.
Rodriguez Fernandez, Carlos (2019). Supercritical, transcritical and subcritical real-fluid mixing at high-pressure conditions using the PC-SAFT EoS. (Unpublished Doctoral thesis, City, University of London)
Rokni, H., Gupta, A., Moore, J. , McHugh, M. A., Bamgbade, B. & Gavaises, M. ORCID: 0000-0003-0874-8534 (2019). Purely predictive method for density, compressibility, and expansivity for hydrocarbon mixtures and diesel and jet fuels up to high temperatures and pressures. Fuel, 236, pp. 1377-1390. doi: 10.1016/j.fuel.2018.09.041
Rokni, H., Moore, J., Gupta, A. , McHugh, M. A. & Gavaises, M. ORCID: 0000-0003-0874-8534 (2019). Entropy scaling based viscosity predictions for hydrocarbon mixtures and diesel fuels up to extreme conditions. Fuel, 241, pp. 1203-1213. doi: 10.1016/j.fuel.2018.12.043
Rokni, H. B., Moore, J. D., Gupta, A. , McHugh, M. A., Mallepally, R. R. & Gavaises, M. ORCID: 0000-0003-0874-8534 (2019). General method for prediction of thermal conductivity for well-characterized hydrocarbon mixtures and fuels up to extreme conditions using entropy scaling. Fuel, 245, pp. 594-604. doi: 10.1016/j.fuel.2019.02.044
Rotter, J. M., Goodey, R.J. ORCID: 0000-0002-9166-8393 & Brown, C. J. (2019). Towards design rules for rectangular silo filling pressures. Engineering Structures, 198, article number 109547. doi: 10.1016/j.engstruct.2019.109547
Rowane, A. J., Babu, V. M., Rokni, H. B. , Moore, J. D., Gavaises, M. ORCID: 0000-0003-0874-8534, Wensing, M., Gupta, A. & McHugh, M. A. (2019). Effect of Composition, Temperature, and Pressure on the Viscosities and Densities of Three Diesel Fuels. Journal of Chemical & Engineering Data, 64(12), pp. 5529-5547. doi: 10.1021/acs.jced.9b00652
Rowane, A. J., Gavaises, M. ORCID: 0000-0003-0874-8534 & McHugh, M. A. (2019). Vapor-liquid equilibria and mixture densities for 2,2,4,4,6,8,8-heptamethylnonane + N2 and n-hexadecane + N2 binary mixtures up to 535 K and 135 MPa. Fluid Phase Equilibria, 506, article number 112378. doi: 10.1016/j.fluid.2019.112378
Rowane, A. J., Mallepally, R. R., Gupta, A. , Gavaises, M. ORCID: 0000-0003-0874-8534 & McHugh, M. A. (2019). High-Temperature, High-Pressure Viscosities and Densities of n-Hexadecane, 2,2,4,4,6,8,8-Heptamethylnonane, and Squalane Measured Using a Universal Calibration for a Rolling-Ball Viscometer/Densimeter. Industrial & Engineering Chemistry Research, 58(10), pp. 4303-4316. doi: 10.1021/acs.iecr.8b05952
Scott, R., Vidakovic, M., Chikermane, S. , McKinley, B. ORCID: 0000-0001-6641-5100, Sun, T. ORCID: 0000-0003-3861-8933, Banerji, P. & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2019). Encapsulation of Fiber Optic Sensors in 3-D Printed Packages for use in Civil Engineering Applications: A Preliminary Study. Sensors, 19(7), article number 1689. doi: 10.3390/s19071689
Scott, R.H., Chikermane, S., Vidakovic, M. , McKinley, B., Sun, T. ORCID: 0000-0003-3861-8933, Banerji, P. & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2019). Development of low cost packaged fibre optic sensors for use in reinforced concrete structures. Measurement: Journal of the International Measurement Confederation, 135, pp. 617-624. doi: 10.1016/j.measurement.2018.11.056
Sedhain, S. & Giaralis, A. ORCID: 0000-0002-2952-1171 (2019). Enhanced optimal tuned mass-damper-inerter performance for seismic protection of multi-storey buildings via top-storey softening. In: https://seced.org.uk/2019. SECED 2019 Conference, 9-10 September 2019, Greenwich, London.
Singh, G. ORCID: 0000-0001-7456-7868, Sun, S., Kovacevic, A. , Li, Q. & Bruecker, C. (2019). Transient flow analysis in a Roots blower: Experimental and numerical investigations. Mechanical Systems and Signal Processing, 134, article number 106305. doi: 10.1016/j.ymssp.2019.106305
Skrekas, P., Giaralis, A. ORCID: 0000-0002-2952-1171 & Sextos, A. (2019). Probabilistic seismic risk assessment of adjacent colliding r/c inelastic structures accounting for record-to-record variability. Paper presented at the 4th Hellenic Conference of Earthquake Engineering and Engineering Seismology, 5-7 Sep 2019, Athens, Greece.
Smith-Creasey, M. & Rajarajan, M. (2019). A novel scheme to address the fusion uncertainty in multi-modal continuous authentication schemes on mobile devices. 2019 International Conference on Biometrics (ICB), doi: 10.1109/ICB45273.2019.8987390
Smith-Creasey, M. & Rajarajan, M. (2019). A novel word-independent gesture-typing continuous authentication scheme for mobile devices. Computers and Security, 83, pp. 140-150. doi: 10.1016/j.cose.2019.02.001
Solis-Lemus, J. A., Stramer, B., Slabaugh, G. G. & Reyes-Aldasoro, C. C. ORCID: 0000-0002-9466-2018 (2019). MacroSight: A novel framework to analyze the shape and movement of interacting macrophages using MAtLABR †. Journal of Imaging, 5(1), article number 17. doi: 10.3390/jimaging5010017
Somehsaraei, H. N., Iaria, D., Al Zaili, J. , Assadi, M., Sayma, A. ORCID: 0000-0003-2315-0004 & Ghavami, M. ORCID: 0000-0002-0772-7726 (2019). Application of Artificial Neural Networks for Monitoring and Optimum Operation Prediction of Solar Hybrid MGT Systems. In: Volume 3: Coal, Biomass, Hydrogen, and Alternative Fuels; Cycle Innovations; Electric Power; Industrial and Cogeneration; Organic Rankine Cycle Power Systems. ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition, 17-21 Jun 2019, Phoenix, Arizona. doi: 10.1115/gt2019-91180
Song, J., Ghosh, S. ORCID: 0000-0002-1992-2289, Dhingra, N. , Zhang, H., Zhou, L. & Rahman, B. M. ORCID: 0000-0001-6384-0961 (2019). Feasibility study of a Ge₂Sb₂Te₅-clad silicon waveguide as a non-volatile optical on-off switch. OSA Continuum, 2(1), pp. 49-63. doi: 10.1364/osac.2.000049
Song, J., Ghosh, S. ORCID: 0000-0002-1992-2289, Zhang, H. , Zhou, L. & Rahman, B. M. ORCID: 0000-0001-6384-0961 (2019). Design, optimization, and performance evaluation of GSST clad low-loss non-volatile switches. Applied Optics, 58(31), pp. 8687-8694. doi: 10.1364/ao.58.008687
Soomro, A., Amiryar, M. E., Nankoo, D. & Pullen, K. R. ORCID: 0000-0001-8501-9226 (2019). Performance and Loss Analysis of Squirrel Cage Induction Machine Based Flywheel Energy Storage System. Applied Sciences, 9(21), article number 4537. doi: 10.3390/app9214537
Soysouvanh, S., Phongsanam, P., Mitatha, S. , Ali, J., Yupapin, P., Amiri, I. S., Grattan, K. T. V. ORCID: 0000-0003-2250-3832 & Yoshida, M. (2019). Ultrafast all-optical ALU operation using a soliton control within the cascaded InGaAsP/InP microring circuits. Microsystem Technologies, 25(2), pp. 431-440. doi: 10.1007/s00542-018-4011-2
Stavropoulos Vasilakis, E., Kyriazis, N., Koukouvinis, P. , Farhat, M. & Gavaises, M. ORCID: 0000-0003-0874-8534 (2019). Cavitation Induction by Projectile Impacting on a Water Jet. International Journal of Multiphase Flow, 114, pp. 128-139. doi: 10.1016/j.ijmultiphaseflow.2019.03.001
Stefanitsis, D., Strotos, G., Nikolopoulos, N. & Gavaises, M. ORCID: 0000-0003-0874-8534 (2019). Numerical investigation of the aerodynamic breakup of a parallel moving droplet cluster. International Journal of Multiphase Flow, 121, article number 103123. doi: 10.1016/j.ijmultiphaseflow.2019.103123
Stefanitsis, D., Strotos, G., Nikolopoulos, N. , Kakaras, E. & Gavaises, M. ORCID: 0000-0003-0874-8534 (2019). Improved droplet breakup models for spray applications. International Journal of Heat and Fluid Flow, 76, pp. 274-286. doi: 10.1016/j.ijheatfluidflow.2019.02.010
Stephen, D., Lam, D., Forth, J. , Ye, J. & Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 (2019). An evaluation of modelling approaches and column removal time on progressive collapse of building. Journal of Constructional Steel Research, 153, pp. 243-253. doi: 10.1016/j.jcsr.2018.07.019
Stosic, N. (2019). Operation and performance of screw machines with high built-in volume ratio. IOP Conference Series: Materials Science and Engineering, 604(1), doi: 10.1088/1757-899X/604/1/012014
Stosic, N., Smith, I. K. & Kovacevic, A. ORCID: 0000-0002-8732-2242 (2019). Improving Screw Compressor Displacement and Efficiency by Increasing the Rotor Profile Depth. In: IOP Conference Series: Materials Science and Engineering. doi: 10.1088/1757-899X/604/1/011012
Tabrizian, A., Masdari, M. ORCID: 0000-0002-1159-2406 & Tahani, M. (2019). Surface Pressure Study of an Airfoil Undergoing Combined Pitch and Low-Amplitude Plunge Motions. Journal of Applied Fluid Mechanics, 12(6), pp. 1957-1966. doi: 10.29252/jafm.12.06.29824
Taflanidis, A., Giaralis, A. ORCID: 0000-0002-2952-1171 & Patsialis, D. (2019). Multi-objective optimal design of inerter-based vibration absorbers for earthquake protection of multi-storey building structures. Journal of The Franklin Institute, 356(14), pp. 7754-7784. doi: 10.1016/j.jfranklin.2019.02.022
Tahir, S., Ruj, S., Sajjad, A. & Rajarajan, M. (2019). Fuzzy keywords enabled ranked searchable encryption scheme for a public Cloud environment. Computer Communications, 133, pp. 102-114. doi: 10.1016/j.comcom.2018.08.004
Talboys, E ORCID: 0000-0001-8993-0180, Geyer, T. F. & Bruecker, C. ORCID: 0000-0001-5834-3020 (2019). An aeroacoustic investigation into the effect of self-oscillating trailing edge flaplets. Journal of Fluids and Structures, 91, article number 102598. doi: 10.1016/j.jfluidstructs.2019.02.014
Talboys, E. ORCID: 0000-0001-8993-0180, Geyer, T. F. & Brücker, C. ORCID: 0000-0001-5834-3020 (2019). Influence of self-oscillating trailing edge flaplets on turbulent boundary layer - Trailing edge noise. In: Ochmann, M., Vorländer, M. & Fels, J. (Eds.), Proceedings of the 23rd International Congress on Acoustics : integrating 4th EAA Euroregio 2019 : 9-13 September 2019 in Aachen, Germany. (pp. 588-595). Berlin: Deutsche Gesellschaft für Akustik. doi: 10.18154/RWTH-CONV-239824
Tamanna, N. (2019). Modelling of residual stresses of the laser cladding process. (Unpublished Doctoral thesis, City, University of London)
Tamanna, N., Crouch, R.S. & Naher, S. ORCID: 0000-0003-2047-5807 (2019). Progress in Numerical Simulation of the Laser Cladding Process. Optics and Lasers in Engineering, 122, pp. 151-163. doi: 10.1016/j.optlaseng.2019.05.026
Tanghetti, G., Goodey, R.J. ORCID: 0000-0002-9166-8393, Divall, S. , McNamara, A. M. & Mckinley, B. (2019). Design and development of a large shear box for testing working platform material. Paper presented at the ECSMGE - 2019. XVII European Conference on Soil Mechanics and Geotechnical Engineering, 1 - 6 September 2019, Reykjavik, Iceland.
Tomas-Rodriguez, M. ORCID: 0000-0001-9630-9579, Feroz, K. & Santos, M. (2019). Floating Offshore Wind Turbines Oscillations Damping. In: 10th EUROSIM Congress on Modelling and Simulation Logroño, La Rioja, Spain, July 1-5, 2019. 10th EUROSIM Congress on Modelling and Simulation Logroño, 01 - 05 July, 2019, La Rioja, Spain. doi: 10.11128/arep.58
Tomas-Rodriguez, M. ORCID: 0000-0001-9630-9579 & Santos, M. (2019). Modelling and control of floating offshore wind turbines. REVISTA IBEROAMERICANA DE AUTOMATICA E INFORMATICA INDUSTRIAL, 16(4), doi: 10.4995/riai.2019.11648
Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979, Efthymiou, E., Adugu, A. , Hughes, J. & Grekavicius, L. (2019). Application of structural topology optimisation in aluminium cross-sectional design. Thin-Walled Structures, 139, pp. 372-388. doi: 10.1016/j.tws.2019.02.038
Tvrdojevic, M., Vujanovic, M., Priesching, P. , Tap, F. A., Starikov, A., Goryntsev, D. & Gavaises, M. ORCID: 0000-0003-0874-8534 (2019). Implementation of the Semi Empirical Kinetic Soot Model within Chemistry Tabulation Framework for Efficient Emissions Predictions in Diesel Engines. Open Physics, 17(1), pp. 905-915. doi: 10.1515/phys-2019-0096
Vazquez, V. F., Hidalgo, M. E., Garcia-Hoz, A. M. , Camara, A. ORCID: 0000-0002-1675-2640, Teran, F., Ruiz-Teran, A. M. & Paje, S. E. (2019). Tire/road noise, texture, and vertical accelerations: Surface assessment of an urban road. Applied Acoustics, 160, article number 107153. doi: 10.1016/j.apacoust.2019.107153
Veerasamy, Dhamotharan (2019). Effect on flap transition of upstream wake turbulence. (Unpublished Doctoral thesis, City, University of London)
Verhoeven, J. ORCID: 0000-0002-0738-8517, Marien, P., De Clerck, I. , Daems, L., Reyes-Aldasoro, C. C. ORCID: 0000-0002-9466-2018 & Miller, N. (2019). Asymmetries in speech articulation as reflected on palatograms: a meta-study. In: Calhoun, S., Escudero, P., Tabain, M. & Warren, P. (Eds.), Proceedings of the 19th International Congress of Phonetic Sciences, Melbourne, Australia 2019. ICPhS 2019, 5-9 August 2019, Melbourne, Australia.
Verhoeven, J. ORCID: 0000-0002-0738-8517, Miller, N. R., Daems, L. & Reyes-Aldasoro, C. C. ORCID: 0000-0002-9466-2018 (2019). Visualisation and Analysis of Speech Production with Electropalatography. Journal of Digital Imaging, 5(3), article number 40. doi: 10.3390/jimaging5030040
Vidakovic, M., Rente, B., Fabian, M. , Li, X., Fisher, P., Li, K., Sun, T. & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2019). Flow measurement inside a zinc-nickel flow cell battery using FBG based sensor system. Proceedings of SPIE, 11199, article number 1119915. doi: 10.1117/12.2539875
Vidal Roncero, A. ORCID: 0000-0001-8177-518X, Koukouvinis, P. ORCID: 0000-0002-3945-3707 & Gavaises, M. ORCID: 0000-0003-0874-8534 (2019). Effect of Diesel injection pressures up to 450MPa on in-nozzle flow using realistic multicomponent surrogates. Paper presented at the ILASS 2019 - 29th European Conference on Liquid Atomization and Spray Systems, 2 - 4 September 2019, Paris, France.
Vlahakis, E. E., Dritsas, L. & Halikias, G. ORCID: 0000-0003-1260-1383 (2019). Distributed LQR Design for a Class of Large-Scale Multi-Area Power Systems. Energies, 12(14), article number 2664. doi: 10.3390/en12142664
Vlahakis, E. E. ORCID: 0000-0002-7039-5314, Dritsas, L. & Halikias, G. ORCID: 0000-0003-1260-1383 (2019). Distributed LQR design for identical dynamically coupled systems: Application to load frequency control of multi-area power grid. Proceedings of the IEEE Conference on Decision and Control, 2019-D, pp. 4471-4476. doi: 10.1109/CDC40024.2019.9028865
Vlahakis, E. E. ORCID: 0000-0002-7039-5314, Dritsas, L. & Halikias, G. ORCID: 0000-0003-1260-1383 (2019). Distributed LQR-based Suboptimal Control for Coupled Linear Systems. IFAC-PapersOnLine, 52(20), pp. 109-114. doi: 10.1016/j.ifacol.2019.12.139
Vlahakis, E. E. ORCID: 0000-0002-7039-5314, Dritsas, L. & Halikias, G. ORCID: 0000-0003-1260-1383 (2019). Distributed Model Predictive Load Frequency Control of multi-area Power Grid: A Decoupling Approach. IFAC papers online, 52(20), pp. 205-210. doi: 10.1016/j.ifacol.2019.12.159
Vlahakis, E. E. & Halikias, G. ORCID: 0000-0003-1260-1383 (2019). Distributed LQR Methods for Networks of Non-Identical Plants. In: 2018 IEEE Conference on Decision and Control (CDC). 2018 IEEE Conference on Decision and Control (CDC), 17-19 Dec. 2018, Miami Beach, FL, USA. doi: 10.1109/cdc.2018.8619185
Vlahakis, E. E. ORCID: 0000-0002-7039-5314 & Halikias, G. ORCID: 0000-0003-1260-1383 (2019). Temperature and concentration control of exothermic chemical processes in continuous stirred tank reactors. Transactions of the Institute of Measurement and Control, 41(15), pp. 4274-4284. doi: 10.1177/0142331219855591
Wang, L., Qian, K., Fu, F. ORCID: 0000-0002-9176-8159 & Deng, X-F. (2019). Experimental Study on Seismic Behaviour of RC Frames with Different Infilled Masonry. Magazine of Concrete Research, 72(23), pp. 1203-1221. doi: 10.1680/jmacr.18.00484
Wang, N., Zhang, H., Zhou, L. , Lu, L., Chen, J. & Rahman, B. M. A. ORCID: 0000-0001-6384-0961 (2019). Design of Ultra-Compact Optical Memristive Switches with GST as the Active Material. Micromachines, 10(7), article number 453. doi: 10.3390/mi10070453
Wang, Y., Cai, G., Li, Y. , Waldmann, D., Si Larbi, A. & Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 (2019). Behavior of Circular Fiber-Reinforced Polymer-Steel-Confined Concrete Columns Subjected to Reversed Cyclic Loads: Experimental Studies and Finite-Element Analysis. Journal of Structural Engineering, 145(9), article number 04019085. doi: 10.1061/(asce)st.1943-541x.0002373
Wang, Z. & Giaralis, A. ORCID: 0000-0002-2952-1171 (2019). Vibration suppression and energy harvesting potential in wind excited buildings equipped with ground floor tuned inerter damper. Paper presented at the 9th Conference on Smart Structures and Materials, SMART 2019, 8-11 Jul 2019, Paris, France.
Weng, Y., Qian, K., Fu, F. ORCID: 0000-0002-9176-8159 & Fang, Q. (2019). Numerical Investigation on Load Redistribution Capacity of Flat Slab Substructures to Resist Progressive Collapse. Journal of Building Engineering, 29, article number 101109. doi: 10.1016/j.jobe.2019.101109
White, M. ORCID: 0000-0002-7744-1993, Read, M. G. & Sayma, A. I. (2019). Comparison between single and cascaded organic Rankine cycle systems accounting for the effects of expansion volume ratio on expander performance. IOP Conference Series: Materials Science and Engineering, 604(1), article number 12086. doi: 10.1088/1757-899X/604/1/012086
White, M. ORCID: 0000-0002-7744-1993, Read, M. G. ORCID: 0000-0002-7753-2457 & Sayma, A. I. ORCID: 0000-0003-2315-0004 (2019). A comparison between cascaded and single-stage ORC systems taken from the component perspective. In: Sotirios, K. & Kakaras, E. (Eds.), Proceedings of the 5th International Seminar on ORC Power Systems.
White, M. ORCID: 0000-0002-7744-1993 & Sayma, A. I. (2019). Simultaneous Cycle Optimization and Fluid Selection for ORC Systems Accounting for the Effect of the Operating Conditions on Turbine Efficiency. Frontiers in Energy Research, 7(JUN), article number 50. doi: 10.3389/fenrg.2019.00050
Wong, Y. Y. (2019). Developing a cardiac mechanics analysis framework using shell finite elements. (Unpublished Doctoral thesis, City, University of London)
Wu, Y., Yan, D., Chen, N-K. , Grattan, K. T. V. ORCID: 0000-0003-2250-3832, Rahman, B. M. ORCID: 0000-0001-6384-0961, Li, X., Tian, Z., Zhang, L., Zhang, X., Zhang, X., Xi, L. & Zhang, H. (2019). High sensitivity micro-fiber Mach-Zehnder interferometric temperature sensors with a high index ring layer. Optics Express, 27(23), pp. 34247-34257. doi: 10.1364/oe.27.034247
Xu, Y., Zhou, L., Lu, L. , Chen, J. & Rahman, B. M. ORCID: 0000-0001-6384-0961 (2019). Enhanced forward stimulated Brillouin scattering in silicon photonic slot waveguide Bragg grating. Journal of Physics D: Applied Physics, 52(18), article number 184001. doi: 10.1088/1361-6463/ab06d6
Yan, S. ORCID: 0000-0001-8968-6616, Li, Q. ORCID: 0000-0001-7456-7868, Wang, J. ORCID: 0000-0003-1821-2362 , Ma, Q. ORCID: 0000-0001-5579-6454, Xie, Z. & Stoesser, T. (2019). Comparative Numerical Study on Focusing Wave Interaction with FPSO-like Structure. International Journal of Offshore and Polar Engineering, 29(2), pp. 149-157. doi: 10.17736/ijope.2019.jc754
Yang, D., Guzmán-Iñigo, J. ORCID: 0000-0002-1833-6034 & Morgans, A. S. (2019). Sound generation by entropy perturbations passing through short circular holes. In: Proceedings of the 23rd International Congress on Acoustics : integrating 4th EAA Euroregio 2019 : 9-13 September 2019 in Aachen, Germany. 23rd International Congress on Acoustics : integrating 4th EAA Euroregio 2019, 9-13 Sep 2019, Aachen, Germany. doi: 10.18154/RWTH-CONV-239656
Yang, L., Kovacevic, A. ORCID: 0000-0002-8732-2242 & Read, M. (2019). Normal Rack Grid Generation Method for Screw Machines with Large Helix Angles. In: IOP Conference Series: Materials Science and Engineering. doi: 10.1088/1757-899X/604/1/012011
Yang, Y-F. & Fu, F. ORCID: 0000-0002-9176-8159 (2019). Fire resistance of steel beam to square CFST column composite joints using RC slabs: Experiments and numerical studies. Fire Safety Journal, 104, pp. 90-108. doi: 10.1016/j.firesaf.2019.01.009
Zenati, A., Laleg-Kirati, T-M., Chakir, M. & Tadjine, M. (2019). Dynamical Behavior of Biological Healthy Steady State in Leukemia Using a New Leukemic & Healthy Stem Cells Cohabitation Model with Distributed Delay. In: 2019 American Control Conference (ACC). 2019 American Control Conference (ACC), 10-12 Jul 2019, Philadelphia, USA. doi: 10.23919/ACC.2019.8814334
Zhai, H., Wu, Q., Xiong, K. , Yoshikawa, N., Sun, T. ORCID: 0000-0003-3861-8933 & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2019). Investigation of the Viscoelastic Effect on Optical- Fiber Sensing and Its Solution for 3D-Printed Sensor Packages. Applied Optics, 58(16), pp. 4306-4314. doi: 10.1364/ao.58.004306
Zhang, H., Zhou, L., Lu, L. , Xu, J., Wang, N., Hu, H., Rahman, B. M. ORCID: 0000-0001-6384-0961, Zhoungyuan, Z. & Ghen, J. (2019). Miniature Multilevel Optical Memristive Switch Using Phase Change Material. ACS Photonics, 6(9), pp. 2205-2212. doi: 10.1021/acsphotonics.9b00819
Zhang, H., Zhou, L., Xu, J. , Lu, L., Chen, J., Rahman, B. M. ORCID: 0000-0001-6384-0961 & IEEE, . (2019). All-optical synapses based on silicon microring resonators actuated by the phase change material Ge2Sb2Te5. In: OSA Technical Digest (Optical Society of America, 2019). CLEO: 2019, 5-10 May 2019, San Jose, USA. doi: 10.1364/CLEO_SI.2019.STh4H.2
Zhang, H., Zhou, L., Xu, J. , Wang, N., Hu, H., Lu, L., Rahman, B. M. ORCID: 0000-0001-6384-0961 & Chen, J. (2019). Nonvolatile waveguide transmission tuning with electrically-driven ultra-small GST phase-change material. Science Bulletin, 64(11), pp. 782-789. doi: 10.1016/j.scib.2019.04.035
Zhang, N., Zheng, X. & Ma, Q. ORCID: 0000-0001-5579-6454 (2019). Study on wave-induced kinematic responses and flexures of ice floe by Smoothed Particle Hydrodynamics. Computers & Fluids, 189, pp. 46-59. doi: 10.1016/j.compfluid.2019.04.020
Zhang, N., Zheng, X., Ma, Q. ORCID: 0000-0001-5579-6454 & Hu, Z. (2019). A numerical study on ice failure process and ice-ship interactions by Smoothed Particle Hydrodynamics. INTERNATIONAL JOURNAL OF NAVAL ARCHITECTURE AND OCEAN ENGINEERING, 11(2), pp. 796-808. doi: 10.1016/j.ijnaoe.2019.02.008
Zhang, S., Silver, J., Del Bino, L. , Copie, F., Woodley, M. T. M., Ghalanos, G. N., Svela, A., Moroney, N. & Del’Haye, P. (2019). Sub-milliwatt-level microresonator solitons with extended access range using an auxiliary laser. Optica, 6(2), pp. 206-212. doi: 10.1364/optica.6.000206
Zhang, T., Taylor, R. N., Divall, S. ORCID: 0000-0001-9212-5115 , Zheng, G., Sun, J., Stallebrass, S. E. ORCID: 0000-0002-3747-9524 & Goodey, R.J. ORCID: 0000-0002-9166-8393 (2019). Explanation for twin tunnelling-induced surface settlements by changes in soil stiffness on account of stress history. Tunnelling and Underground Space Technology, 85, pp. 160-169. doi: 10.1016/j.tust.2018.12.015
Zhao, Z., Dai, K., Camara, A. ORCID: 0000-0002-1675-2640 , Bitsuamlak, G. & Sheng, C. (2019). Comparison of wind turbine tower failure modes under seismic and wind loads. Journal of Performance of Constructed Facilities, 33(2), article number 04019015. doi: 10.1061/(asce)cf.1943-5509.0001279
Zhou, L., Zhang, H., Hu, H. , Wang, N., Lu, L., Rahman, B. M. ORCID: 0000-0001-6384-0961 & Chen, J. (2019). Non-volatile silicon photonic devices enabled by phase change material. In: 2019 18th International Conference on Optical Communications and Networks (ICOCN). . New York, USA: IEEE.
Zhu, F., Wang, G., Liu, T. , Ma, G., Grattan, K. T. V. ORCID: 0000-0003-2250-3832, Zhang, H., Fu, J., Liu, X., Hu, B. & Li, Y. (2019). Optical fiber sensors for coal mine shaft integrity and equipment condition monitoring. Proceedings of SPIE - The International Society for Optical Engineering, 11340, article number 113401Y. doi: 10.1117/12.2548154
2018
Abdan, S., Stosic, N., Kovacevic, A. ORCID: 0000-0002-8732-2242 , Smith, I. K. & Deore, P. (2018). Identification and analysis of screw compressor mechanical losses. IOP Conference Series: Materials Science and Engineering, 425(1), article number 12015. doi: 10.1088/1757-899X/425/1/012015
Aboukhedr, M., Georgoulas, A., Marengo, M. , Gavaises, M. ORCID: 0000-0003-0874-8534 & Vogiatzaki, K. (2018). Simulation of micro-flow dynamics at low capillary numbers using adaptive interface compression. Computers & Fluids, 165, pp. 13-32. doi: 10.1016/j.compfluid.2018.01.009
Abro, F. I. (2018). Investigating Android permissions and intents for malware detection. (Unpublished Doctoral thesis, City, Universtiy of London)
Ahmad, H., Karim, M. R., Ghosh, S. ORCID: 0000-0002-1992-2289 & Rahman, B. M. ORCID: 0000-0001-6384-0961 (2018). Generation of an ultrabroadband supercontinuum in the mid-infrared region using dispersion-engineered GeAsSe photonic crystal fiber. Optical and Quantum Electronics, 50(11), article number 405. doi: 10.1007/s11082-018-1674-y
Ahmed, I. M. & Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 (2018). Life cycle assessment (LCA) and cost (LCC) studies of lightweight composite flooring systems. Journal of Building Engineering, 20, pp. 624-633. doi: 10.1016/j.jobe.2018.09.013
Al Azwani, N. & Chen, T. ORCID: 0000-0001-8037-1685 (2018). Cyber Deterrence by Punishment: Role of Different Perceptions. Cyberpolitik Journal, 3(5), pp. 62-75.
Alam, N., Nadjai, A., Maraveas, C. , Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 & Ali, F. (2018). Effect of air-gap on performance of fabricated slim floor beams in fire. In: Proceedings of the 9th International Conference on Advances in Steel Structures. Ninth International Conference on Advances in Steel Structures - ICASS 2018, 5-7 Dec 2018, Hong Kong. doi: 10.18057/ICASS2018.P.043
Alam, N., Nadjai, A., Maraveas, C. , Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 & Ali, F. (2018). Response of Asymmetric Slim Floor Beams in Parametric-Fires. Journal of Physics: Conference Series, 1107(3), article number 032009. doi: 10.1088/1742-6596/1107/3/032009
Ali, J., Youplao, P., Pornsuwancharoen, N. , Chaiwong, K., Chiangga, S., Amiri, I. S., Punthawanunt, S., Singh, G., Yupapin, P. & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2018). An integrated microring circuit design for optoelectronic transformer applications. Results in Physics, 11, pp. 706-708. doi: 10.1016/j.rinp.2018.10.022
Ali, J., Youplao, P., Pornsuwancharoen, N. , Jalil, M. A., Aziz, M. S., Chiangga, S., Amiri, I. S., Punthawanunt, S., Singh, G., Yupapin, P. & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2018). Novel Kerr-Vernier effects within the on-chip Si-ChG microring circuits. Results in Physics, 11, pp. 144-147. doi: 10.1016/j.rinp.2018.08.052
Ali, J., Youplao, P., Pornsuwancharoen, N. , Jalil, M. A., Chaiwong, K., Aziz, M. S., Amiri, I. S., Bunrungses, M., Singh, G., Yupapin, P. & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2018). On-chip electro-optic multiplexing circuit using serial microring boxcar filters. Results in Physics, 10, pp. 18-21. doi: 10.1016/j.rinp.2018.05.026
Ali, J., Youplao, P., Pornsuwancharoen, N. , Jalil, M. A., Chiangga, S., Amiri, I. S., Punthawanunt, S., Aziz, M. S., Singh, G., Yupapin, P. & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2018). Nano-capacitor-like model using light trapping in plasmonic island embedded microring system. Results in Physics, 10, pp. 727-730. doi: 10.1016/j.rinp.2018.07.013
Aming, A. & Rahman, B. M. A. ORCID: 0000-0001-6384-0961 (2018). Design and Characterization Low-loss modes in Dielectric-Coated Hollow-core waveguides at THz Frequency. Journal of Lightwave Technology, 36(13), pp. 2716-2722. doi: 10.1109/jlt.2018.2820690
Amiryar, M. E., Pullen, K. R. ORCID: 0000-0001-8501-9226 & Nankoo, D. (2018). Development of a high-fidelity model for an electrically driven energy storage flywheel suitable for small scale residential applications. Applied Sciences, 8(3), article number 453. doi: 10.3390/app8030453
Apostolopoulou, D. ORCID: 0000-0002-9012-9910, De Greve, Z. & McCulloch, M. (2018). Robust Optimisation for Hydroelectric System Operation under Uncertainty. IEEE Transactions on Power Systems, 33(3), pp. 3337-3348. doi: 10.1109/tpwrs.2018.2807794
Apriyanto, H., Ravet, G., Bernal, O.D. , Cattoen, M., Seat, H.C., Chavagnac, V., Surre, F. & Sharp, J. H. (2018). Comprehensive Modeling of Multimode Fiber Sensors for Refractive Index Measurement and Experimental Validation. Scientific Reports, 8(1), article number 5912. doi: 10.1038/s41598-018-24153-0
Armakolas, I. (2018). Cavitation erosion fracture mechanisms and their detection in ship rudders. (Unpublished Doctoral thesis, City, University of London)
Arnold, P. (2018). Hybrid Radio Resource Management with Limited Channel Feedback Information in Relay enhanced OFDMA Networks. (Unpublished Doctoral thesis, City, University of London)
Asif, W., Rajarajan, M. & Lestas, M. (2018). Increasing user controllability on device specific privacy in the Internet of Things. Computer Communications, 116, pp. 200-211. doi: 10.1016/j.comcom.2017.11.009
Backer Dirks, T. (2018). On the controllability of saturating crossflow vortices. (Unpublished Doctoral thesis, City, University of London)
Banerjee, J. R. & Ananthapuvirajah, A. (2018). Free vibration of functionally graded beams and frameworks using the dynamic stiffness method. Journal of Sound and Vibration, 422, pp. 34-47. doi: 10.1016/j.jsv.2018.02.010
Banerjee, J. R. & Ananthapuvirajah, A. (2018). An exact dynamic stiffness matrix for a beam incorporating Rayleigh–Love and Timoshenko theories. International Journal of Mechanical Sciences, 150, pp. 337-347. doi: 10.1016/j.ijmecsci.2018.10.012
Basha, N., Kovacevic, A. ORCID: 0000-0002-8732-2242, Stosic, N. & Smith, I. K. (2018). Effect of oil-injection on twin screw compressor performance. IOP Conference Series: Materials Science and Engineering, 425(1), article number 12009. doi: 10.1088/1757-899X/425/1/012009
Bellini, R., Borges, C. V. S., Rente, B. & Martinez, M. A. G. (2018). Optimized Multimode Interference Fiber Based Refractometer in A Reflective Interrogation Scheme. Proceedings, 13, article number 1107. doi: 10.3390/proceedings2131107
Belschner, J. (2018). Scheduling heuristic for reduced complexity of coordinated beamforming in large multi-carrier heterogeneous wireless networks. (Unpublished Doctoral thesis, City, University of London)
Belschner, J., Rakocevic, V. ORCID: 0000-0002-3081-0448 & Habermann, J. (2018). Complexity of coordinated beamforming and scheduling for OFDMA based heterogeneous networks. Wireless Networks, 25(5), pp. 2233-2248. doi: 10.1007/s11276-017-1645-4
Berger, T. & Karcanias, N. ORCID: 0000-0002-1889-6314 (2018). The pseudo McMillan degree of implicit transfer functions of RLC networks. Circuits, Systems, and Signal Processing, 38(3), pp. 967-985. doi: 10.1007/s00034-018-0921-6
Bhattacharjee, R., Kejalakshmy, N. & Rahman, B. M. ORCID: 0000-0001-6384-0961 (2018). Design and optimization of an Al doped ZnO in Si-slot for gas sensing. IEEE Photonics Journal, 10(4), pp. 1-10. doi: 10.1109/jphot.2018.2849383
Blasco, J. & Chen, T. ORCID: 0000-0001-8037-1685 (2018). Automated generation of colluding apps for experimental research. Journal of Computer Virology and Hacking Techniques, 14(2), pp. 127-138. doi: 10.1007/s11416-017-0296-4
Blasco, J., Chen, T. ORCID: 0000-0001-8037-1685, Muttik, I. & Roggenbach, M. (2018). Detection of app collusion potential using logic programming. Journal of Network and Computer Applications, 105, pp. 88-104. doi: 10.1016/j.jnca.2017.12.008
Bonifacio, Alberto (2018). Optical characterisation and modelling of return valve flow in diesel fuel injection equipment. (Unpublished Doctoral thesis, City, University of London)
Bottemanne, M. & Atkin, C.J. (2018). Tool for sizing suction pumps for hybrid laminar flow control concepts. International Journal of Mechanical Engineering and Robotics Research, 7(1), pp. 1-8. doi: 10.18178/ijmerr.7.1.1-8
Bruecker, C. ORCID: 0000-0001-5834-3020, Hess, D. & Watz, B. (2018). Volumetric Calibration Refinement using masked back projection and image correlation superposition. In: Proceedings of the 19th International Symposium Applications of Laser and Imaging Techniques to Fluid Mechanics. 19th International Symposium on Applications of Laser and Imaging Techniques to Fluid Mechanics, 16-19 Jul 2018, Lisbon, Portugal.
Brunhart, M., Koukouvinis, F. ORCID: 0000-0002-3945-3707, Gavaises, M. ORCID: 0000-0003-0874-8534 , Soteriou, C. & Daveau, C. (2018). Initial findings of an investigation on the removal of the cavitation erosion risk in a prototype control orifice inside a diesel injector. Paper presented at the The 10th International Symposium on Cavitation (CAV2018), 14-16 May 2018, Baltimore, USA.
Brunhart, M., Soteriou, C., Daveau, C. , Gavaises, E., Koukouvinis, P. & Winterbourn, M. (2018). Investigation on the removal of the cavitation erosion risk in a control orifice inside a prototype diesel injector. Paper presented at the Fuel Systems - Engines, 04 - 05 December 2019, London, UK.
Budidha, K. ORCID: 0000-0002-6329-8399, Rybynok, V & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2018). Design and Development of a Modular, Multichannel Photoplethysmography System. IEEE Transactions on Instrumentation and Measurement, 67(8), pp. 1954-1965. doi: 10.1109/tim.2018.2810643
Camara, A. ORCID: 0000-0002-1675-2640 (2018). Seismic Behaviour of Cable-Stayed Bridges: A Review. Medcrave Online Journal of Civil Engineering, 4(3), pp. 161-169. doi: 10.15406/mojce.2018.04.00115
Casari, N., Pinelli, M., Suman, A. , Kovacevic, A. ORCID: 0000-0002-8732-2242, Rane, S. & Ziviani, D. (2018). Full 3D numerical analysis of a twin screw compressor by employing open-source software. IOP Conference Series: Materials Science and Engineering, 425(1), article number 12017. doi: 10.1088/1757-899X/425/1/012017
Castillo-Rivera, S. & Tomas-Rodriguez, M. (2018). Helicopter modelling and study of the accelerated rotor. Advances in Engineering Software, 115, pp. 52-65. doi: 10.1016/j.advengsoft.2017.08.012
Chatterjee, S. (2018). Monte Carlo investigation of light-tissue interaction in photoplethysmography. (Unpublished Doctoral thesis, City, University of London)
Chatterjee, S., Abay, T. Y., Phillips, J. P. ORCID: 0000-0003-3486-3704 & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2018). Investigating optical path and differential pathlength factor in reflectance photoplethysmography for the assessment of perfusion. Journal of Biomedical Optics, 23(07), article number 075005. doi: 10.1117/1.jbo.23.7.075005
Chitsanga, N., Giaralis, A. ORCID: 0000-0002-2952-1171 & Kaitwanidvilai, S. (2018). Robust cascade H infinity control of BLDC motor systems using fixed-structure two degrees of freedom controllers designed via genetic algorithm. In: Lecture Notes in Engineering and Computer Science. International MultiConference of Engineers and Computer Scientists 2018, 14-16 Mar 2018, Kowloon, Hong Kong.
Cristofaro, M., Edelbauer, W., Koukouvinis, F. & Gavaises, M. ORCID: 0000-0003-0874-8534 (2018). Large Eddy Simulation of the internal injector flow during pilot injection. Paper presented at the The 10th International Symposium on Cavitation (CAV2018), 14-16 May 2018, Baltimore, USA.
Crozier, C., Apostolopoulou, D. ORCID: 0000-0002-9012-9910 & McCulloch, M. (2018). Clustering of Usage Profiles for Electric Vehicle Behaviour Analysis. In: 2018 IEEE PES Innovative Smart Grid Technologies Conference Europe (ISGT-Europe). 2018 IEEE PES Innovative Smart Grid Technologies Conference Europe (ISGT-Europe), 21-25 Oct 2018, Sarajevo, Bosnia and Herzegovina.
Crozier, C., Apostolopoulou, D. ORCID: 0000-0002-9012-9910 & McCulloch, M. (2018). Mitigating the Impact of Personal Vehicle Electrification: a Power Generation Perspective. Energy Policy, 118, pp. 474-481. doi: 10.1016/j.enpol.2018.03.056
Dasari, B. L., Morshed, M.M., Nouri, J. M. ORCID: 0000-0001-8610-3737 , Brabazon, D. & Naher, S. (2018). Mechanical properties of graphene oxide reinforced aluminium matrix composites. Composites Part B: Engineering, 145, pp. 136-144. doi: 10.1016/j.compositesb.2018.03.022
Deakin, M., Morstyn, T., Apostolopoulou, D. ORCID: 0000-0002-9012-9910 & McCulloch, M. (2018). The Value of Reactive Power for Voltage Control in Lossy Networks. 2018 IEEE Power & Energy Society General Meeting (PESGM), doi: 10.1109/PESGM.2018.8586256
Decarli, B. & Giaralis, A. ORCID: 0000-0002-2952-1171 (2018). Modal strain-based post-earthquake damage characterization of r/c frame buildings. Paper presented at the 16th European Conference on Earthquake Engineering- 16ECEE, 18 - 21 June 2018, Thessaloniki, Greece.
Del Bino, L., Silver, J., Woodley, M. , Stebbings, S., Zhao, X. & Del’Haye, P. (2018). Microresonator isolators and circulators based on the intrinsic nonreciprocity of the Kerr effect. Optica, 5(3), pp. 279-282. doi: 10.1364/optica.5.000279
Dhingra, N., Song, J., Ghosh, S. ORCID: 0000-0002-1992-2289 , Zhou, L. & Rahman, B. M. A. ORCID: 0000-0001-6384-0961 (2018). Design of phase change Ge2Sb2Te5 based on-off electro-optic switch. Proceedings of SPIE, 10537, article number 105370Z. doi: 10.1117/12.2287218
Dissanayake, K. P. W., Kumar, R., Nguyen, T.H. , Wu, W. ORCID: 0000-0003-1462-6402, Sun, T. ORCID: 0000-0003-3861-8933 & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2018). Stability of Graphene Oxide encapsulated Gold Nanorods for optical sensing purposes. Journal of Physics: Conference Series, 1065(3), article number 0.032021. doi: 10.1088/1742-6596/1065/3/032021
Divall, S. (2018). Twin-tunnelling-induced changes to clay stiffness. In: Zdravković, L. (Ed.), Tunnelling in the Urban Environment:. Géotechnique Symposium in Print, 2017. (pp. 37-44). London: ICE Publishing. doi: 10.1680/tue.63778
Divall, S. ORCID: 0000-0001-9212-5115, Stallebrass, S. E. ORCID: 0000-0002-3747-9524, Goodey, R.J. ORCID: 0000-0002-9166-8393 & Ritchie, E. P. (2018). Development of layered models for geotechnical centrifuge tests. In: McNamara, A. M., Divall, S., Goodey, R.J. , Taylor, N., Stallebrass, S. E. & Panchal, J. P. (Eds.), Physical Modelling in Geotechnics: Proceedings of the 9th International Conference on Physical Modelling in Geotechnics (ICPMG 2018), July 17-20, 2018, London, United Kingdom. (pp. 143-147). London, UK: CRC Press.
Elshalakani, M. & Bruecker, C. ORCID: 0000-0001-5834-3020 (2018). Spontaneous Synchronization of Beating Cilia: An Experimental Proof Using Vision-Based Control. Fluids, 3(2), article number 30. doi: 10.3390/fluids3020030
Erice, B., Thomson, D., Ponnusami, S. A. , Pathan, M. V. & Petrinic, N. (2018). On the Rate-dependent Plasticity Modelling of Unidirectional Fibre-reinforced Polymeric Matrix Composites. EPJ Web of Conferences, 183, article number 1055. doi: 10.1051/epjconf/201818301055
Escobar-Restrepo, B., Torres-Villa, R. & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2018). Evaluation of the Linear Relationship Between Pulse Arrival Time and Blood Pressure in ICU Patients: Potential and Limitations. Frontiers in Physiology, 9, article number 1848. doi: 10.3389/fphys.2018.01848
Estebanez Camarena, M., Feetham, L., Scannapieco, A. & Aouf, N. ORCID: 0000-0001-9291-4077 (2018). FPGA-based multi-sensor relative navigation in space: Preliminary analysis in the framework of the I3DS H2020 project. Paper presented at the 69th International Astronautical Congress (IAC), 1-5 Oct 2018, Bremen, Germany.
Fabian, M., Hind, D., Gerada, C. , Sun, T. & Grattan, K. T. V. (2018). Comprehensive monitoring of electrical machine parameters using an integrated fibre Bragg grating-based sensor system. Journal of Lightwave Technology, 36(4), pp. 1046-1051. doi: 10.1109/jlt.2017.2771143
Faghih, F. (2018). Structural performance of nano concrete-steel sandwich wall. (Unpublished Doctoral thesis, City, Universtiy of London)
Farshad Mehr, A. (2018). Determination of Design of Optimal Actuator Location Based on Control Energy. (Unpublished Doctoral thesis, City, University of London)
Fatmi, Zeeshan (2018). Optical and chemical characterisation of the effects of high-pressure hydrodynamic cavitation on diesel fuel. (Unpublished Doctoral thesis, City, University of London)
Fonseca, J. ORCID: 0000-0002-7654-6005, Nadimi, S. & Kong, D. (2018). Image-based modelling of shelly carbonate sand for foundation design of offshore structures. In: Proceedings of the 1st Vietnam Symposium on Advances in Offshore Engineering. VSOE 2018. Lecture Notes in Civil Engineering. doi: 10.1007/978-981-13-2306-5_5
Fu, F. ORCID: 0000-0002-9176-8159 (2018). Editorial. Proceedings of the Institution of Civil Engineers - Structures and Buildings, 171(4), pp. 271-272. doi: 10.1680/jstbu.2018.171.4.271
Fu, F. ORCID: 0000-0002-9176-8159 & Parke, G. A. (2018). Assessment of the Progressive Collapse Resistance of Double-layer Grid Space Structures using implicit and explicit solvers. International Journal of Steel Structures, 18(3), pp. 831-842. doi: 10.1007/s13296-018-0030-1
Gan, T., Wu, Y., Sun, Z. ORCID: 0000-0002-3862-7939 , Jin, D., Song, H. & Jia, M. (2018). Shock wave boundary layer interaction controlled by surface arc plasma actuators. Physics of Fluids, 30(5), article number 055107. doi: 10.1063/1.5013166
Gendy, S. & Ayoub, A. ORCID: 0000-0002-2670-9662 (2018). Dipslacement and Mixed Fibre Beam Elements for Modelling of Slender Reinforced Concrete Structures under Cyclic Loads. Engineering Structures, 173, pp. 620-630. doi: 10.1016/j.engstruct.2018.07.008
Gendy, S. S. F. M. & Ayoub, A. ORCID: 0000-0002-2670-9662 (2018). Displacement and mixed fibre beam elements for modelling of slender reinforced concrete structures under cyclic loads. Engineering Structures, 173, pp. 620-630. doi: 10.1016/j.engstruct.2018.07.008
Gendy, S. S. F. M. & Ayoub, A. ORCID: 0000-0002-2670-9662 (2018). Explicit fiber beam-column elements for impact analysis of structures. Journal of Structural Engineering, 144(7), pp. 1-12. doi: 10.1061/(asce)st.1943-541x.0002061
Ghosh, S. (2018). Design and optimisation of integrated photonic waveguides and sensors. (Unpublished Doctoral thesis, City, University of London)
Ghosh, S. ORCID: 0000-0002-1992-2289 & Rahman, B. M. ORCID: 0000-0001-6384-0961 (2018). Design of ultra-compact composite plasmonic Mach-Zehnder interferometer for chemical vapor sensing. Proceedings of SPIE, 10535, article number 1053505. doi: 10.1117/12.2290294
Ghosh, S. & Rahman, B. M. ORCID: 0000-0001-6384-0961 (2018). Evolution of Plasmonic Modes in a Metal Nano-Wire Studied by a Modified Finite Element Method. Journal of Lightwave Technology, 36(3), pp. 809-818. doi: 10.1109/jlt.2017.2782710
Ghosh Ray, I., Rahulamathavan, Y. & Rajarajan, M. (2018). A New Lightweight Symmetric Searchable Encryption Scheme for String Identification. IEEE Transactions on Cloud Computing, 8(3), doi: 10.1109/tcc.2018.2820014
Giaralis, A. ORCID: 0000-0002-2952-1171 & Petrini, F. (2018). Erratum for “Wind-Induced Vibration Mitigation in Tall Buildings Using the Tuned Mass-Damper-Inerter” by Agathoklis Giaralis and Francesco Petrini. Journal of Structural Engineering, 144(2), article number 08217004. doi: 10.1061/(asce)st.1943-541x.0001980
Giaralis, A. & Taflanidis, A. A. (2018). Optimal tuned mass-damper-inerter (TMDI) design for seismically excited MDOF structures with model uncertainties based on reliability criteria. Structural Control & Health Monitoring, 25(2), article number e2082. doi: 10.1002/stc.2082
Gkoktsi, K. (2018). Compressive techniques for sub-Nyquist data acquisition & processing in vibration-based structural health monitoring of engineering structures. (Unpublished Doctoral thesis, City, University of London)
Gkoktsi, K. & Giaralis, A. ORCID: 0000-0002-2952-1171 (2018). A sub-Nyquist co-prime sampling music spectral approach for natural frequency identification of white-noise excited structures. In: Proceedings of the 8th International Conference on Computational Stochastic Mechanics (CSM 8).
Goodey, R.J. ORCID: 0000-0002-9166-8393 (2018). Physical modelling applied to infrastructure development. In: McNamara, A. M. ORCID: 0000-0002-3452-0800, Divall, S. ORCID: 0000-0001-9212-5115, Goodey, R.J. ORCID: 0000-0002-9166-8393 , Taylor, N, Stallebrass, S. E. ORCID: 0000-0002-3747-9524 & Panchal, J. P. (Eds.), Physical Modelling in Geotechnics: Proceedings of the 9th International Conference on Physical Modelling in Geotechnics (ICPMG 2018), July 17-20, 2018, London, United Kingdom.
Gowree, E. R. ORCID: 0000-0001-5834-3020, Jagadeesh, C., Talboys, E. ORCID: 0000-0001-8993-0180 , Lageman, C. & Bruecker, C. ORCID: 0000-0001-5834-3020 (2018). Vortices enable the complex aerobatics of peregrine falcons. Communications Biology, 1(1), pp. 1-12. doi: 10.1038/s42003-018-0029-3
Grandal Gonzalez, T., Zornoza, A., Fraga, S. , Castro, G., Sun, T. & Grattan, K. T. V. (2018). Laser Cladding-based metallic embedding technique for fiber optic sensors. Journal of Lightwave Technology, 36(4), pp. 1018-1025. doi: 10.1109/jlt.2017.2748962
Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2018). Welcome by the President of IMEKO, Professor Kenneth Grattan. Journal of Physics: Conference Series, 1065(4), article number 11001. doi: 10.1088/1742-6596/1065/1/011001
Gulistan, A., Ghosh, S. ORCID: 0000-0002-1992-2289 & Rahman, B. M. ORCID: 0000-0001-6384-0961 (2018). Enhancement of modal stability through reduced mode coupling in a few-mode fiber for mode division multiplexing. OSA Continuum, 1(2), pp. 309-319. doi: 10.1364/osac.1.000309
Gulistan, A., Ghosh, S. ORCID: 0000-0002-1992-2289, Ramachandran, S. & Rahman, B. M. ORCID: 0000-0001-6384-0961 (2018). Enhancing mode stability of higher order modes in a multimode fiber. In: Optics InfoBase Conference Papers. Specialty Optical Fibers 2018, 2-5 July 2018, Zurich, Switzerland.
Gulistan, A., Rahman, M. M., Ghosh, S. ORCID: 0000-0002-1992-2289 & Rahman, B. M. ORCID: 0000-0001-6384-0961 (2018). Tailoring light-sound interactions in a single mode fiber for the high-power transmission or sensing applications. Proceedings of SPIE - The International Society for Optical Engineering, 10714, article number 1071403. doi: 10.1117/12.2296703
Guo, Z., Ma, Q. ORCID: 0000-0001-5579-6454 & Qin, H. (2018). Multi-Domain 2.5D Method for Multiple Water Level Hydrodynamics. Water, 10(2), article number 232. doi: 10.3390/w10020232
Guo, Z., Ma, Q. ORCID: 0000-0001-5579-6454 & Qin, H. (2018). A novel 2.5D method for solving the mixed boundary value problem of a surface effect ship. Applied Ocean Research, 78, pp. 25-32. doi: 10.1016/j.apor.2018.05.016
Guo, Z., Ma, Q. & Qin, H. (2018). A time-domain Green's function for interaction betweenwaterwaves and floating bodies with viscous dissipation effects. Water, 10(1), article number 72. doi: 10.3390/w10010072
Guo, Z., Ma, Q. ORCID: 0000-0001-5579-6454, Yu, S. & Qin, H. (2018). A Body-Nonlinear Green's Function Method with Viscous Dissipation Effects for Large-Amplitude Roll of Floating Bodies. Applied Sciences, 8(4), article number 517. doi: 10.3390/app8040517
Guo, Z., Qin, H. & Ma, Q. ORCID: 0000-0001-5579-6454 (2018). A study on hydrodynamics of the air cushion of a high-speed PACSCAT. European Journal of Mechanics, B/Fluids, 72, pp. 353-363. doi: 10.1016/j.euromechflu.2018.07.004
Halai, H. (2018). Compensation grouting to control deep excavation ground movements. (Unpublished Doctoral thesis, City, University of London)
Hantschke, M., Sideris, D., Kyriacou, P. A. ORCID: 0000-0002-2868-485X & Triantis, I. ORCID: 0000-0002-8900-781X (2018). Optimization of Tetrapolar Impedance Electrodes in Microfluidic Devices for Point of Care Diagnostics using Finite Element Modeling. In: 2018 40th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC). 2018 40th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, 18-21 Jul 2018, Honolulu, USA. doi: 10.1109/embc.2018.8513467
Hawdon-Earl, S. & Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 (2018). Form finding and dimensioning of reinfornced concrete shell roof for Akrotiri (Santorini). Journal of the International Association for Shell and Spatial Structures, 59(4), pp. 276-285. doi: 10.20898/j.iass.2018.198.014
Hosseinpour, A. (2018). An investigation into electric supercharging for emission reduction by means of engine downsizing. (Unpublished Doctoral thesis, City, Universtiy of London)
Hu, H., Zhang, H., Zhou, L. , Xu, Y., Lu, L., Chen, J. & Rahman, B. M. ORCID: 0000-0001-6384-0961 (2018). Non-volatile optical memory based on a slot nanobeam resonator filled with GST material. In: 2018 Asia Communications and Photonics Conference (ACP). 2018 Asia Communications and Photonics Conference (ACP), 26 - 29 October 2018, Hangzhou, China. doi: 10.1109/ACP.2018.8596243
Iaria, D., Nipkey, H., Al Zaili, J. , Sayma, A. I. ORCID: 0000-0003-2315-0004 & Assadi, M. (2018). Development and Validation of a Thermo-Economic Model for Design Optimisation and Off-Design Performance Evaluation of a Pure Solar Microturbine. Energies, 11(11), article number 3199. doi: 10.3390/en11113199
Iqbal, S., Zhang, L., Fu, X. , Su, D., Zhou, H., Wu, W. ORCID: 0000-0003-1462-6402 & Zhang, T. (2018). Highly-efficient low cost anisotropic wet etching of silicon wafers for solar cells application. AIP Advances, 8(2), article number 025223. doi: 10.1063/1.5012125
Isakhani, H., Aouf, N. ORCID: 0000-0001-9291-4077, Kechagias-Stamatis, O. & Whidborne, J. F. (2018). A Furcated Visual Collision Avoidance System for an Autonomous Micro Robot. IEEE Transactions on Cognitive and Developmental Systems, 12(1), pp. 1-11. doi: 10.1109/tcds.2018.2858742
Jadidbonab, H. (2018). Diesel Fuel droplet impingement on heated surfaces. (Unpublished Doctoral thesis, City, University of London)
Jadidbonab, H., Malgarinos, I., Karathanassis, I. K. ORCID: 0000-0001-9025-2866 , Mitroglou, N. ORCID: 0000-0002-2955-8716 & Gavaises, M. ORCID: 0000-0003-0874-8534 (2018). We-T classification of diesel fuel droplet impact regimes. Proceedings of the Royal Society A: Mathematicsl, Physical and Engineering Sciences, 474(2215), article number 20170759. doi: 10.1098/rspa.2017.0759
Jadidbonab, H., Mitroglou, N. ORCID: 0000-0002-2955-8716, Karathanassis, I. K. ORCID: 0000-0001-9025-2866 & Gavaises, M. ORCID: 0000-0003-0874-8534 (2018). Experimental Study of Diesel-Fuel Droplet Impact on a Similarly Sized Polished Spherical Heated Solid Particle. Langmuir, 34(1), pp. 36-49. doi: 10.1021/acs.langmuir.7b01658
Jagadeesh, C., Gowree, E. R., Jadidbonab, H. & Atkin, C. J. ORCID: 0000-0003-2529-1978 (2018). On the temporal analysis of acoustic waves using schlieren imaging. Measurement, 116, pp. 507-513. doi: 10.1016/j.measurement.2017.11.018
Jamalan, M. H. & Fu, F. ORCID: 0000-0002-9176-8159 (2018). Numerical Analysis on Bond Strength of FRP Re-bars Under Elevated Temperature. In: IOP Conference Series : Materials Science and Engineering. 2018 3rd International Conference on Building Materials and Construction (ICBMC 2018),, 23 - 25 February 2018, Nha Trang, Vietnam. doi: 10.1088/1757-899X/371/1/012013
Jamalan, M. H. & Fu, F. ORCID: 0000-0002-9176-8159 (2018). Numerical Analysis on Bond Strength of FRP Rebars under Elevated Temperature. IOP Conference Series : Materials Science and Engineering, 371, article number 1203. doi: 10.1088/1757-899X/371/1/012013
Jawaid, M. M., Narejo, S., Pirzada, N. , Baloch, J., Reyes-Aldasoro, C. C. ORCID: 0000-0002-9466-2018 & Slabaugh, G. G. (2018). Automated quantification of non-calcified coronary plaques in cardiac CT angiographic imagery. International Journal of Advanced Computer Science and Applications, 9(7), pp. 216-222. doi: 10.14569/ijacsa.2018.090731
Jiang, H., He, L., Zhang, Q. & Wang, L. (2018). On scaling method to investigate high-speed over-tip-leakage flow at low-speed condition. Journal of Engineering for Gas Turbines and Power, 140(6), article number 062605. doi: 10.1115/1.4038619
Jiang, W. & Rahman, B. M. ORCID: 0000-0001-6384-0961 (2018). Design of Power-Splitter With Selectable Splitting-Ratio Using Angled and Cascaded MMI-Coupler. IEEE Journal of Quantum Electronics, 54(6), pp. 1-9. doi: 10.1109/jqe.2018.2874087
Kabir, I. R., Yin, D., Tamanna, N. & Naher, S. ORCID: 0000-0003-2047-5807 (2018). Thermomechanical modelling of laser surface glazing for H13 tool steel. Applied Physics A: Materials Science & Processing, 124(3), article number 260. doi: 10.1007/s00339-018-1671-9
Kappos, A. J. (2018). The dynamic intelligent bridge: A new concept in bridge dynamics. In: Proceedings of the International Conference on Earthquake Engineering and Structural Dynamics. ICESD 2017. International Conference on Earthquake Engineering and Structural Dynamics, 12 -14 Jun 2017, Reykjavik, Iceland. doi: 10.1007/978-3-319-78187-7_28
Karabağ, C. ORCID: 0000-0003-4424-0471, Jones, M. L., Peddie, C. J. , Weston, A. E., Collinson, L. M. & Reyes-Aldasoro, C. C. ORCID: 0000-0002-9466-2018 (2018). Automated Segmentation of HeLa Nuclear Envelope from Electron Microscopy Images. Communications in Computer and Information Science, doi: 10.1007/978-3-319-95921-4_23
Karathanassis, I. K. ORCID: 0000-0001-9025-2866, Koukouvinis, P. ORCID: 0000-0002-3945-3707, Kontolatis, E. , Lee, Z, Wang, J, Mitroglou, N. ORCID: 0000-0002-2955-8716 & Gavaises, M. ORCID: 0000-0003-0874-8534 (2018). High-speed visualization of vortical cavitation using synchrotron radiation. Journal of Fluid Mechanics, 838, pp. 148-164. doi: 10.1017/jfm.2017.885
Karathanassis, I. K. ORCID: 0000-0001-9025-2866, Trickett, K., Koukouvinis, P. ORCID: 0000-0002-3945-3707 , Wang, J., Barbour, R. & Gavaises, M. ORCID: 0000-0003-0874-8534 (2018). Illustrating the effect of viscoelastic additives on cavitation and turbulence with X-ray imaging. Scientific Reports, 8(1), pp. 1-15. doi: 10.1038/s41598-018-32996-w
Karcanias, N. ORCID: 0000-0002-1889-6314, Leventides, J. & Meintanis, I. ORCID: 0000-0002-1920-1801 (2018). Structure assignment problems in linear systems: Algebraic and geometric methods. Annual Reviews in Control, 46, pp. 80-93. doi: 10.1016/j.arcontrol.2018.09.004
Karim, M. R., Ahmad, H., Ghosh, S. & Rahman, B. M. ORCID: 0000-0001-6384-0961 (2018). Design of dispersion-engineered As2Se3 channel waveguide for mid-infrared region supercontinuum generation. Journal of Applied Physics, 123(21), article number 213101. doi: 10.1063/1.5033494
Karim, M. R., Ahmad, H., Ghosh, S. ORCID: 0000-0002-1992-2289 & Rahman, B. M. ORCID: 0000-0001-6384-0961 (2018). Mid-infrared supercontinuum generation using As2Se3 photonic crystal fiber and the impact of higher-order dispersion parameters on its supercontinuum bandwidth. Optical Fiber Technology, 45, pp. 255-266. doi: 10.1016/j.yofte.2018.07.024
Karim, M. R., Ahmad, H. & Rahman, B. M. ORCID: 0000-0001-6384-0961 (2018). Design and modeling of dispersion-engineered all-chalcogenide triangular-core fiber for mid-infrared-region supercontinuum generation. Journal of the Optical Society of America B: Optical Physics (JOSA B), 35(2), pp. 266-275. doi: 10.1364/josab.35.000266
Kather, J. N., Berghoff, A. S., Ferber, D. , Suarez-Carmona, M., Reyes-Aldasoro, C. C. ORCID: 0000-0002-9466-2018, Valous, N. A., Rojas-Moraleda, R., Jäger, D. & Halama, N. (2018). Large-scale database mining reveals hidden trends and future directions for cancer immunotherapy. OncoImmunology, 7(7), article number e1444412. doi: 10.1080/2162402x.2018.1444412
Kechagias-Stamatis, O., Aouf, N. ORCID: 0000-0001-9291-4077, Gray, G. , Chermak, L., Richardson, M. & Oudyi, F. (2018). Local feature based automatic target recognition for future 3D active homing seeker missiles. Aerospace Science and Technology, 73, pp. 309-317. doi: 10.1016/j.ast.2017.12.011
Khader, M. A. ORCID: 0000-0002-5771-2258 & Sayma, A. I. ORCID: 0000-0003-2315-0004 (2018). Drag reduction within radial turbine rotor passages using riblets. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 236(1), pp. 14-25. doi: 10.1177/0954408918819399
Kong, D. & Fonseca, J. (2018). Quantification of the morphology of shelly carbonate sands using 3D images. Géotechnique, 68(3), pp. 249-261. doi: 10.1680/jgeot.16.p.278
Koukouvinis, P. ORCID: 0000-0002-3945-3707, Kyriazis, N. & Gavaises, M. ORCID: 0000-0003-0874-8534 (2018). Smoothed particle hydrodynamics simulation of a laser pulse impact onto a liquid metal droplet. PLoS One, 13(9), article number e0204125. doi: 10.1371/journal.pone.0204125
Koukouvinis, P. ORCID: 0000-0002-3945-3707, Strotos, G., Zeng, Q. , Gonzalez-Avila, S. R., Theodorakakos, A., Gavaises, M. ORCID: 0000-0003-0874-8534 & Ohl, C-D. (2018). Parametric Investigations of the Induced Shear Stress by a Laser-Generated Bubble. Langmuir, 34(22), pp. 6428-6442. doi: 10.1021/acs.langmuir.8b01274
Krishnasamy, J., Ponnusami, S. A., Turteltaub, S. & van der Zwaag, S. (2018). Modelling the fracture behaviour of thermal barrier coatings containing healing particles. Materials & Design, 157, pp. 75-86. doi: 10.1016/j.matdes.2018.07.026
Kumar, R., Nguyen, T.H., Agrawal, A. , Sun, T. ORCID: 0000-0003-3861-8933 & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2018). Estimation of the aspect-ratio distribution in chemically synthesized gold nanorods solution using UV-visible absorption spectroscopy. Journal of Physics : Conference Series, 1065(3), article number 32023. doi: 10.1088/1742-6596/1065/3/032023
Kyriazis, N. (2018). Simulation of cavitation using compressible flow solvers. (Unpublished Doctoral thesis, City, University of London)
Kyriazis, N., Koukouvinis, F. ORCID: 0000-0002-3945-3707 & Gavaises, E. ORCID: 0000-0003-0874-8534 (2018). Modelling cavitation during drop impact on solid surfaces. Advances in Colloid and Interface Science, 260, pp. 46-64. doi: 10.1016/j.cis.2018.08.004
Kyriazis, N., Koukouvinis, F. ORCID: 0000-0002-3945-3707, Gavaises, E. ORCID: 0000-0003-0874-8534 , Pearson, R. & Gold, M. (2018). Heating Effects During Bubble Collapse Using Tabulated Data. Paper presented at the The 10th International Symposium on Cavitation (CAV2018), 14-16 May 2018, Baltimore, USA. doi: 10.1115/1.861851_ch94
Kyriazis, N., Koukouvinis, F. ORCID: 0000-0002-3945-3707, Karathanassis, I. K. ORCID: 0000-0001-9025-2866 & Gavaises, M. ORCID: 0000-0003-0874-8534 (2018). A tabulated data technique for cryogenic two-phase flows. Paper presented at the 7th European Conference on Computational Fluid Dynamics, 11-15 Jun 2018, Glasgow, UK.
Kyriazis, N., Koukouvinis, P. ORCID: 0000-0002-3945-3707 & Gavaises, M. ORCID: 0000-0003-0874-8534 (2018). Modelling cavitation during drop impact on solid surfaces. Advances in Colloid and Interface Science, 260, pp. 46-64. doi: 10.1016/j.cis.2018.08.004
Le, B. T., Nadimi, S., Goodey, R.J. ORCID: 0000-0002-9166-8393 & Taylor, R.N. ORCID: 0000-0002-8103-0433 (2018). A study on performance of three-dimensional imaging system for physical models. In: McNamara, A. M. ORCID: 0000-0002-3452-0800, Divall, S. ORCID: 0000-0001-9212-5115, Goodey, R.J. ORCID: 0000-0002-9166-8393 , Taylor, N., Stallebrass, S. E. ORCID: 0000-0002-3747-9524 & Panchal, J. P. (Eds.), Physical Modelling in Geotechnics: Proceedings of the 9th International Conference on Physical Modelling in Geotechnics (ICPMG 2018), July 17-20, 2018, London, United Kingdom.
Le, B. T. & Taylor, R. N. ORCID: 0000-0002-8103-0433 (2018). Ground response to tunnelling incorporating a soil reinforcement system. Canadian Geotechnical Journal, 56(11), pp. 1719-1728. doi: 10.1139/cgj-2018-0075
Le, B. T. & Taylor, R. N. ORCID: 0000-0002-8103-0433 (2018). Response of clay soil to three-dimensional tunnelling simulation in centrifuge models. Soils and Foundations, 58(4), pp. 808-818. doi: 10.1016/j.sandf.2018.03.008
Leandrou, S., Mamais, I., Petroudi, S. , Kyriacou, P. A. ORCID: 0000-0002-2868-485X, Reyes-Aldasoro, C. C. ORCID: 0000-0002-9466-2018 & Pattichis, C. S. (2018). Hippocampal and entorhinal cortex volume changes in Alzheimer's disease patients and mild cognitive impairment subjects.. BHI, pp. 235-238. doi: 10.1109/BHI.2018.8333412
Leandrou, S., Petroudi, S., Reyes-Aldasoro, C. C. , Kyriacou, P. A. & Pattichis, C. S. (2018). Quantitative MRI Brain Studies in Mild Cognitive Impairment and Alzheimer's disease: A Methodological Review. IEEE Reviews in Biomedical Engineering, 11(99), pp. 97-111. doi: 10.1109/rbme.2018.2796598
Li, Q. & Bruecker, C. ORCID: 0000-0001-5834-3020 (2018). Vortex interaction with a rough wall formed by a hexagonal lattice of posts. Physics of Fluids, 30(5), article number 054107. doi: 10.1063/1.5026463
Li, Q., Wang, J. ORCID: 0000-0003-1821-2362, Yan, S. ORCID: 0000-0001-8968-6616 , Gong, J. & Ma, Q. ORCID: 0000-0001-5579-6454 (2018). A zonal hybrid approach coupling FNPT with OpenFOAM for modelling wave-structure interactions with action of current. Ocean Systems Engineering, 8(4), pp. 381-407. doi: 10.12989/ose.2018.8.4.381
Li, Q., Yan, S. ORCID: 0000-0001-8968-6616, Wang, J. ORCID: 0000-0003-1821-2362 , Ma, Q. ORCID: 0000-0001-5579-6454, Xie, Z. & Sriram, V. (2018). Numerical simulation of focusing wave interaction with FPSO-like structure using FNPT-NS Solver. In: Proceedings of the International Offshore and Polar Engineering Conference.
Li, W., Mitchell, C. J. & Chen, T. ORCID: 0000-0001-8037-1685 (2018). Mitigating CSRF attacks on OAuth 2.0 Systems. In: 2018 16th Annual Conference on Privacy, Security and Trust (PST). 16th Annual Conference on Provacy, Security and Trust (PST), 28-30 August 2018, Belfast, Northern Ireland, United Kingdom. doi: 10.1109/PST.2018.8514180
Li, W., Mitchell, C. J. & Chen, T. ORCID: 0000-0001-8037-1685 (2018). Your Code Is My Code: Exploiting a Common Weakness in OAuth 2.0 Implementations. In: Security Protocols XXVI. Security Protocols 2018. doi: 10.1007/978-3-030-03251-7_3
Li, Y., Gong, J., Ma, Q. ORCID: 0000-0001-5579-6454 & Yan, S. ORCID: 0000-0001-8968-6616 (2018). Effects of the terms associated with phi(zz) in free surface condition on the attitudes and resistance of different ships. Engineering Analysis with Boundary Elements, 95, pp. 266-285. doi: 10.1016/j.enganabound.2018.08.006
Li, Y., Jiang, T., Jin, G. , Zhao, Y., Wei, Y., Zhang, T., Liu, T., Sun, T. ORCID: 0000-0003-3861-8933 & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2018). Quasi-distributed multipoint laser methane detection system and its application in cable trench safety monitoring. Journal of Physics : Conference Series, 1065(25), article number 252020. doi: 10.1088/1742-6596/1065/25/252020
Li, Z., Wang, J., Liu, T. , Zhao, L., Sun, T. & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2018). High Sensitivity 'Hot-wire'-based Gas Velocity Sensor for safe monitoring in mining applications. IEEE Sensors Journal, 18(24), pp. 10192-10198. doi: 10.1109/jsen.2018.2868089
Li, Z., Wang, J., Zhao, L. , Hou, M., Dong, G., Ning, Y., Liu, T., Sun, T. ORCID: 0000-0003-3861-8933 & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2018). High Sensitivity Hot-wire based Wind Velocity Sensor using Co-doped Fiber and Fiber Bragg Grating for use in mining applications. Journal of Physics: Conference Series, 1065(25), article number 0.25202. doi: 10.1088/1742-6596/1065/25/252023
Liu, D., Fayu, W. & Fu, F. ORCID: 0000-0002-9176-8159 (2018). Experimental Research on the Shear Connectors in Foam Concrete. International Journal of Concrete Structures and Materials, 12(1), article number 51. doi: 10.1186/s40069-018-0281-4
Liu, F., Zhao, B., Wu, W. ORCID: 0000-0003-1462-6402 , Yang, H., Ning, Y., Lai, Y. & Bradley, R. (2018). Low Cost, Robust, Environmentally Friendly Geopolymer–Mesoporous Carbon Composites for Efficient Solar Powered Steam Generation. Advanced Functional Materials, 28(47), pp. 1-11. doi: 10.1002/adfm.201803266
Liu, Y., Lemanski, S., Zhang, X. , Ayre, D. & Yazdani Nezhad, H. ORCID: 0000-0003-0832-3579 (2018). A finite element study of fatigue crack propagation in single lap bonded joint with process-induced disbond. International Journal of Adhesion and Adhesives, 87, pp. 164-172. doi: 10.1016/j.ijadhadh.2018.10.005
Liu, Y., Wang, J., Li, Z. , Wang, J., Ning, Y., Liu, T. & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2018). Enhanced Raman Detection System based on a Hollow-core Fiber Probe design. IEEE Sensors Journal, 19(2), pp. 560-566. doi: 10.1109/jsen.2018.2877967
Liu, Z., Geng, Y., Dong, H. , Wilson, J., Micic, T., Wu, R., Cui, X., Qian, Y., You, W. & Sun, H. (2018). Efficient distribution of carbon emissions reduction targets at the city level: A case of Yangtze River Delta region. Journal of Cleaner Production, 172, pp. 1711-1721. doi: 10.1016/j.jclepro.2017.12.033
Lockett, R. D. ORCID: 0000-0002-7883-6241, Bonifacio, A. & Price, R. (2018). Cavitating Flow in a Model Diesel Injector Return Valve. In: Proceedings of the 10th Symposium on Cavitation (CAV2018). 10th International Symposium on Cavitation (CAV2018), 14 - 16 May 2018, Baltimore, Maryland, USA. doi: 10.1115/1.861851_ch31
Lotfian, S., Giraudmaillet, C., Yoosefinejad, A. , Thakur, V. K. & Yazdani Nezhad, H. ORCID: 0000-0003-0832-3579 (2018). Electrospun Piezoelectric Polymer Nanofiber Layers for Enabling in Situ Measurement in High-Performance Composite Laminates. ACS Omega, 3(8), pp. 8891-8902. doi: 10.1021/acsomega.8b00940
Lu, C., Dong, X., Guan, Y. , Su, J., Sun, T. & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2018). Characteristics of few-mode fibre and its application in simultaneous strain and temperature measurement. Journal of Physics : Conference Series, 1065(25), article number 252005. doi: 10.1088/1742-6596/1065/25/252005
Lu, C., Su, J., Dong, X. , Lu, L., Sun, T. ORCID: 0000-0003-3861-8933 & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2018). Studies on Temperature and Strain Sensitivities of a Few-mode Critical Wavelength Fiber Optic Sensor. IEEE Sensors Journal, 19(5), pp. 1794-1801. doi: 10.1109/jsen.2018.2883321
Lu, C., Su, J., Dong, X. , Sun, T. ORCID: 0000-0003-3861-8933 & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2018). Simultaneous Measurement of Strain and Temperature with a Few-Mode Fibre-based Sensor. Journal of Lightwave Technology, 36(13), pp. 2796-2802. doi: 10.1109/jlt.2018.2825294
Lu, J., Yang, Z., Wu, H. , Wu, W., Deng, J. & Yan, S. ORCID: 0000-0001-8968-6616 (2018). Effects of tank sloshing on submerged oil leakage from damaged tankers. Ocean Engineering, 168, pp. 155-172. doi: 10.1016/j.oceaneng.2018.08.015
Lu, Y., Kovacevic, A. ORCID: 0000-0002-8732-2242 & Read, M. G. ORCID: 0000-0002-7753-2457 (2018). Numerical study on screw machines with large helix angles. IOP Conference Series: Materials Science and Engineering, 425(1), article number 12015. doi: 10.1088/1757-899X/425/1/012023
M.G., Mithun, Koukouvinis, F. ORCID: 0000-0002-3945-3707, Karathanassis, I. K. ORCID: 0000-0001-9025-2866 & Gavaises, M. ORCID: 0000-0003-0874-8534 (2018). Simulating the effect of in-nozzle cavitation on liquid atomisation using a three-phase model. Paper presented at the The 10th International Symposium on Cavitation (CAV2018), 14-16 May 2018, Baltimore, USA.
Makri, K. (2018). The characterisation of the internal diesel flow and the external spray structure using laser diagnostics. (Unpublished Doctoral thesis, City, Universtiy of London)
Mallepally, R. R., Bamgbade, B., Rowane, A. J. , Rokni, H. B., Newkirk, M. S. & McHugh, M. A. (2018). Fluid properties at high pressures and temperatures: Experimental and modelling challenges. The Journal of Supercritical Fluids, 134, pp. 33-40. doi: 10.1016/j.supflu.2017.12.003
Mamouei, M. H., Kaparias, I. & Halikias, G. ORCID: 0000-0003-1260-1383 (2018). A framework for user- and system-oriented optimisation of fuel efficiency and traffic flow in Adaptive Cruise Control. Transportation Research Part C: Emerging Technologies, 92, pp. 27-41. doi: 10.1016/j.trc.2018.02.002
Manolesos, M. ORCID: 0000-0002-5506-6061, Gao, Z. & Bouris, D. (2018). Experimental investigation of the atmospheric boundary layer flow past a building model with openings. Building and Environment, 141, pp. 166-181. doi: 10.1016/j.buildenv.2018.05.049
Maraveas, C., Fasoulakis, Z. & Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 (2018). Fire resistance of axially restrained and partially unprotected Ultra Shallow Floor Beams (USFB®) and DELTABEAM® composite beams. In: Applications of Fire Engineering: Proceedings of the International Conference of Applications of Structural Fire Engineering (ASFE 2017), September 7-8, 2017, Manchester, United Kingdom. International Conference of Applications of Structural Fire Engineering (ASFE 2017), 7-8 Sep 2017, Manchester, UK.
Markovic, M., Corsar, D., Asif, W. , Edwards, P. & Rajarajan, M. (2018). Towards Transparency of IoT Message Brokers. Lecture Notes in Computer Science, 11017, pp. 200-203. doi: 10.1007/978-3-319-98379-0_19
Mattheus, W. & Bruecker, C. ORCID: 0000-0001-5834-3020 (2018). Characteristics of the pulsating jet flow through a dynamic glottal model with a lens-like constriction. Biomedical Engineering Letters, 8(3), pp. 309-320. doi: 10.1007/s13534-018-0075-2
McNamara, A. M., Panchal, J. P. & Stallebrass, S. (2018). Physical modelling of lime stabilisation in soft soils around deep excavations. DFI Journal - The Journal of the Deep Foundations Institute, 11(2-3), pp. 137-147. doi: 10.1080/19375247.2018.1436254
Mengxiao, T., Yun, W., Hongyu, W. , Shanguang, G., Zhengzhong, S. ORCID: 0000-0002-3862-7939 & Jiaming, S. (2018). Characterization of transverse plasma jet and its effects on ramp induced separation. Experimental Thermal and Fluid Science, 99, pp. 584-594. doi: 10.1016/j.expthermflusci.2018.05.023
Mergos, P. E. ORCID: 0000-0003-3817-9520 (2018). Efficient optimum seismic design of reinforced concrete frames with nonlinear structural analysis procedures. Structural and Multidisciplinary Optimization, 58(6), pp. 2565-2581. doi: 10.1007/s00158-018-2036-x
Mergos, P.E. (2018). Seismic design of reinforced concrete frames for minimum embodied CO2 emissions. Energy and Buildings, 162, pp. 177-186. doi: 10.1016/j.enbuild.2017.12.039
Mergos, P.E. ORCID: 0000-0003-3817-9520 & Sextos, A. (2018). Multi-objective optimum selection of ground motion records with genetic algorithms. Paper presented at the 16th European Conference on Earthquake Engineering- 16ECEE, 18 - 21 June 2018, Thessaloniki, Greece.
Mgbemena, C. O., Li, D., Lin, M-F. , Liddel, P. D., Katnam, K. B., Thakur, V. K. & Yazdani Nezhad, H. ORCID: 0000-0003-0832-3579 (2018). Accelerated microwave curing of fibre-reinforced thermoset polymer composites for structural applications: A review of scientific challenges. Composites Part A: Applied Science and Manufacturing, 115, pp. 88-103. doi: 10.1016/j.compositesa.2018.09.012
Miah, S. (2018). A low-cost intelligent localisation system to improve cyclist safety. (Unpublished Doctoral thesis, City, University of London)
Miah, S., Milonidis, E., Kaparias, I. & Karcanias, N. ORCID: 0000-0002-1889-6314 (2018). A Novel Fusion Algorithm to Improve Localisation Accuracy of an Instrumented Bicycle. Paper presented at the 97th Annual Meeting of the Transportation Research Board, 7 - 11 January 2018, Washington, USA.
Miao, X. (2018). Turbine end-wall aerothermal management with engineered surface structure. (Unpublished Doctoral thesis, City, University of London)
Miao, X., Zhang, Q. ORCID: 0000-0003-0982-2986, Atkin, C.J. ORCID: 0000-0003-2529-1978 , Sun, Z. & Li, Y. (2018). Improving Purge Air Cooling Effectiveness by Engineered End-Wall Surface Structures-Part I: Duct Flow. Journal Of Turbomachinery, 140(9), pp. 1-12. doi: 10.1115/1.4040853
Miao, X., Zhang, Q. ORCID: 0000-0003-0982-2986, Atkin, C.J. ORCID: 0000-0003-2529-1978 , Sun, Z. & Li, Y. (2018). Improving Purge Air Cooling Effectiveness by Engineered End-Wall Surface Structures-Part II: Turbine Cascade. Journal Of Turbomachinery, 140(9), article number 091002. doi: 10.1115/1.4040854
Miller, N. R., Verhoeven, J. ORCID: 0000-0002-0738-8517 & Reyes-Aldasoro, C. C. ORCID: 0000-0002-9466-2018 (2018). Analysis of the symmetry of electrodes for Electropalatography with Cone Beam CT Scanning. Communications in Computer and Information Science, 2018, pp. 130-139. doi: 10.1007/978-3-319-95921-4_14
Mishra, J. K., Malviya, N., Priye, V. & Rahman, B. M. ORCID: 0000-0001-6384-0961 (2018). Frequency-interleaved SDM transmission over multicore fiber for next generation short-reach optical interconnect systems. Proceedings of SPIE, 10681, article number 1068106. doi: 10.1117/12.2306598
Mithun, M-G, Koukouvinis, P. ORCID: 0000-0002-3945-3707 & Gavaises, M. ORCID: 0000-0003-0874-8534 (2018). Numerical simulation of cavitation and atomization using a fully compressible three-phase model. Physical Review Fluids, 3(6), article number 064304. doi: 10.1103/physrevfluids.3.064304
Mitseas, I., Kougioumtzoglou, I., Giaralis, A. & Beer, M. (2018). A novel stochastic linearization framework for seismic demand estimation of hysteretic MDOF systems subject to linear response spectra. Structural Safety, 72, pp. 84-98. doi: 10.1016/j.strusafe.2017.12.008
Mullapudi, T. R. & Ayoub, A. ORCID: 0000-0002-2670-9662 (2018). Fiber Beam Analysis of Reinforced Concrete Members with Cyclic Constitutive and Material Laws. International Journal of Concrete Structures and Materials, 12(1), article number 61. doi: 10.1186/s40069-018-0286-z
Najibi, F., Alonso, E. ORCID: 0000-0002-3306-695X & Apostolopoulou, D. ORCID: 0000-0002-9012-9910 (2018). Optimal Dispatch of Pumped Storage Hydro Cascade under Uncertainty. In: 2018 UKACC 12th International Conference on Control (CONTROL). Control 2018 – 12th International UKACC Conference on Control, 05 - 07 September 2018, Sheffield, UK.
Naseri, H., Koukouvinis, P., Malgarinos, I. & Gavaises, M. ORCID: 0000-0003-0874-8534 (2018). On viscoelastic cavitating flows: A numerical study. Physics of Fluids, 30(3), article number 033102. doi: 10.1063/1.5011978
Naseri, H., Trickett, K., Mitroglou, N. ORCID: 0000-0002-2955-8716 , Karathanassis, I. K. ORCID: 0000-0001-9025-2866, Koukouvinis, P. ORCID: 0000-0002-3945-3707, Gavaises, M. ORCID: 0000-0003-0874-8534, Barbour, R., Diamond, D., Rogers, S. E., Santini, M. & Wang, J. (2018). Turbulence and Cavitation Suppression by Quaternary Ammonium Salt Additives. Scientific Reports, 8(1), pp. 1-15. doi: 10.1038/s41598-018-25980-x
Nikolić, B. & Khan, S. ORCID: 0000-0001-5589-6914 (2018). Modelling of non-conventional instrument transformers (NCIT) by FEM. In: Journal of Physics: Conference Series. XXII World Congress of the International Measurement Confederation (IMEKO 2018), 3-6 Sep 2018, Belfast, United Kingdom. doi: 10.1088/1742-6596/1065/7/072046
Njoum, H. & Kyriacou, P. A. (2018). In vitro validation of measurement of volume elastic modulus using photoplethysmography. Medical Engineering & Physics, 52, pp. 10-21. doi: 10.1016/j.medengphy.2017.11.011
Nokhandan, M. M., Piomelli, U. & Omidyeganeh, M. ORCID: 0000-0002-4140-2810 (2018). Large-eddy and wall-modelled simulations of turbulent flow over two-dimensional river dunes. Physics and Chemistry of the Earth, 113, pp. 123-131. doi: 10.1016/j.pce.2018.11.004
Nykteri, G., Koukouvinis, P. ORCID: 0000-0002-3945-3707 & Gavaises, M. ORCID: 0000-0003-0874-8534 (2018). A Compressible Σ-Υ Two-Fluid Atomization Model with Dynamic Interface Sharpening based on Flow Topology Detection. In: http://ilasseurope.org/events/iclass-2018/. 14th International Conference on Liquid Atomization and Spray Systems, 22 - 26 July 2018, Chicago, Illinois.
Olliverre, N. J., Yang, G., Slabaugh, G. G. , Reyes-Aldasoro, C. C. ORCID: 0000-0002-9466-2018 & Alonso, E. (2018). Generating Magnetic Resonance Spectroscopy Imaging Data of Brain Tumours from Linear, Non-Linear and Deep Learning Models. In: Simulation and Synthesis in Medical Imaging. SASHIMI 2018: Simulation and Synthesis in Medical Imaging, 16 Sep 2018, Granada, Spain. doi: 10.1007/978-3-030-00536-8_14
Owen, M., McNamara, A. M. ORCID: 0000-0002-3452-0800 & Panchal, J. (2018). The Risk of Unexploded Ordnance on Construction Sites in London. Environmental Geotechnics, 8(2), pp. 116-123. doi: 10.1680/jenge.18.00049
Panchal, J. P. (2018). Minimising ground movements around deep excavations in soft soils. (Unpublished Doctoral thesis, City, University of London)
Panchal, J. P. & McNamara, A. M. ORCID: 0000-0002-3452-0800 (2018). Federation of Piling Specialists’ casing extraction review. Proceedings of the Institution of Civil Engineers - Geotechnical Engineering, 171(2), pp. 174-185. doi: 10.1680/jgeen.17.00134
Panchal, J. P., McNamara, A. M. ORCID: 0000-0002-3452-0800 & Goodey, R.J. ORCID: 0000-0002-9166-8393 (2018). Influence of geometry on the bearing capacity of sheet piled foundations. In: McNamara, A. M. ORCID: 0000-0002-3452-0800, Divall, S. ORCID: 0000-0001-9212-5115, Goodey, R.J. ORCID: 0000-0002-9166-8393 , Taylor, N, Stallebrass, S. E. ORCID: 0000-0002-3747-9524 & Panchal, J. P. (Eds.), Physical Modelling in Geotechnics: Proceedings of the 9th International Conference on Physical Modelling in Geotechnics (ICPMG 2018), July 17-20, 2018, London, United Kingdom. (pp. 1395-1400). Boca Raton: CRC Press/Balkema.
Patel, Z., Thaha, M. A. & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2018). The effects of optical sensor-tissue separation in endocavitary photoplethysmography. Physiological Measurement, 39(7), article number 075001. doi: 10.1088/1361-6579/aacc1d
Pathan, M. V., Erice, B., Ponnusami, S. A. & Petrinic, N. (2018). Experimental characterisation of rate-dependent compression behaviour of fibre reinforced composites. EPJ Web of Conferences, 183, article number 2053. doi: 10.1051/epjconf/201818302053
Ponnusami, S. A. ORCID: 0000-0002-2143-8971, Cui, H., Erice, B. , Pathan, M. V. & Petrinic, N. (2018). A Wedge-DCB Test Methodology to Characterise High Rate Mode-I Interlaminar Fracture Properties of Fibre Composites. EPJ Web of Conferences, 183, article number 2052. doi: 10.1051/epjconf/201818302052
Ponnusami, S. A. ORCID: 0000-0002-2143-8971, Krishnasamy, J., Turteltaub, S. & van der Zwaag, S. (2018). A cohesive-zone crack healing model for self-healing materials. International Journal of Solids and Structures, 134, pp. 249-263. doi: 10.1016/j.ijsolstr.2017.11.004
Pornsuwancharoen, N., Youplao, P., Amiri, I. S. , Aziz, M. S., Ali, J., Singh, G., Yupapin, P., Koledov, V. & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2018). Electron Mobility Sensor Scheme-Based on a Mach-Zehnder Interferometer Approach. IEEE Photonics Technology Letters, 30(10), pp. 887-890. doi: 10.1109/lpt.2018.2822288
Pornsuwancharoen, N., Youplao, P., Amiri, I. S. , Aziz, M. S., Tran, Q. L., Ali, J., Yupapin, P. & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2018). Multifunction interferometry using the electron mobility visibility and mean free path relationship. Microscopy Research and Technique, 81(8), pp. 872-877. doi: 10.1002/jemt.23049
Pornsuwancharoen, N., Youplao, P., Aziz, M. S. , Ali, J., Amiri, S., Punthawanunt, S., Yupapin, P. & Grattan, K. T. V. (2018). In-situ 3D Micro-sensor Model using Embedded Plasmonic Island for Biosensors. Microsystem Technologies, 24(9), pp. 3631-3635. doi: 10.1007/s00542-018-3798-1
Qaban, A. & Naher, S. ORCID: 0000-0003-2047-5807 (2018). Influence of Al content on the corrosion resistance of micro-alloyed hot rolled steel as a function of grain size. AIP Conference Proceedings, 1960, article number 040017. doi: 10.1063/1.5034871
Qassem, M., Triantis, I. ORCID: 0000-0002-8900-781X, Hickey, M. , Palazidou, E. & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2018). Methodology for rapid assessment of blood lithium levels in ultramicro volumes of blood plasma for applications in personal monitoring of patients with bipolar mood disorder. Journal of Biomedical Optics (JBO), 23(10), article number 107004. doi: 10.1117/1.jbo.23.10.107004
Rahman, B. M. ORCID: 0000-0001-6384-0961, Mishra, J. K. & Pan, C. (2018). Design and optimization of photonic devices and optical fibers for space-division multiplexing. Proceedings of SPIE, 10560, article number 1056007. doi: 10.1117/12.2291522
Rahman, E., Powner, M. B. ORCID: 0000-0003-4913-1004, Kyriacou, P. A. ORCID: 0000-0002-2868-485X & Triantis, I. ORCID: 0000-0002-8900-781X (2018). Assessment of the Complex Refractive Indices of Xenopus Laevis Sciatic Nerve for the Optimisation of Optical (NIR) Neurostimulation. IEEE Transactions on Neural Systems and Rehabilitation Engineering, 26(12), pp. 2306-2314. doi: 10.1109/tnsre.2018.2878107
Reyes-Aldasoro, C. C. ORCID: 0000-0002-9466-2018 (2018). Shape Analysis and Tracking of Migrating Macrophages. Poster presented at the IEEE International Symposium on Biomedical Imaging (ISBI), 4-7 Apr 2018, Washington, D.C., USA.
Rodriguez, C., Koukouvinis, F. ORCID: 0000-0002-3945-3707 & Gavaises, M. ORCID: 0000-0003-0874-8534 (2018). Simulation of supercritical Diesel jets using the PC-SAFT EoS. The Journal of Supercritical Fluids, 145, pp. 48-65. doi: 10.1016/j.supflu.2018.11.003
Rodriguez, C., Vidal, A., Koukouvinis, P. & Gavaises, M. (2018). Simulation of transcritical Diesel jets using the PC-SAFT EoS. Paper presented at the ICLASS 2018, 22-26 Jul 2018, Chicago, USA.
Rodriguez, C., Vidal, A., Koukouvinis, P. ORCID: 0000-0002-3945-3707 , Gavaises, M. ORCID: 0000-0003-0874-8534 & McHugh, M. A. (2018). Simulation of transcritical fluid jets using the PC-SAFT EoS. Journal of Computational Physics, 374, pp. 444-468. doi: 10.1016/j.jcp.2018.07.030
Ronado, D., Aouf, N. ORCID: 0000-0001-9291-4077 & Dubois-Matra, O. (2018). Multispectral Image Processing for Navigation Using Low Performance Computing. Paper presented at the 69th International Astronautical Congress (IAC), 1-5 Oct 2018, Bremen, Germany.
Rosti, M. E., Brandt, L. & Pinelli, A. ORCID: 0000-0001-5564-9032 (2018). Turbulent channel flow over an anisotropic porous wall - drag increase and reduction. Journal of Fluid Mechanics, 842, pp. 381-394. doi: 10.1017/jfm.2018.152
Rosti, M. E., Omidyeganeh, M. ORCID: 0000-0002-4140-2810 & Pinelli, A. ORCID: 0000-0001-5564-9032 (2018). Numerical Simulation of a Passive Control of the Flow Around an Aerofoil Using a Flexible, Self Adaptive Flaplet. Flow, Turbulence and Combustion, 100(4), pp. 1111-1143. doi: 10.1007/s10494-018-9914-6
Rosti, M. E., Omidyeganeh, M. & Pinelli, A. (2018). Passive control of the flow around unsteady aerofoils using a self-activated deployable flap. Journal of Turbulence, 19(3), pp. 204-228. doi: 10.1080/14685248.2017.1314486
Ruiz, R., Taflanidis, A., Giaralis, A. ORCID: 0000-0002-2952-1171 & Lopez-Garcia, D. (2018). Multi-criteria optimization of seismic protective devices utilizing lifecycle performance objectives and application to the design of the tuned mass damper inerter (TMDI) for buildings in Chile. Paper presented at the 16th European Conference on Earthquake Engineering- 16ECEE, 18 - 21 June 2018, Thessaloniki, Greece.
Saha, C. R., Riley, P. H. ORCID: 0000-0002-1580-7689, Jinks, R. & Johnson, C. M. (2018). Suspension Design, Modeling, and Testing of a Thermo-Acoustic-Driven Linear Alternator. Journal Of Vibration And Acoustics, 140(2), article number 021014. doi: 10.1115/1.4038270
Sahu, S., Ali, J., Yupapin, P. P. , Singh, G. & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2018). High-Q and temperature stable photonic biosensor based on grating waveguides. Optical and Quantum Electronics, 50(8), article number 307. doi: 10.1007/s11082-018-1578-x
Sandoval, R. M., Garcia-Sanchez, A-J., Garcia-Haro, J. & Chen, T. ORCID: 0000-0001-8037-1685 (2018). Optimal Policy Derivation for Transmission Duty-Cycle Constrained LPWAN. IEEE Internet of Things Journal, 5(4), pp. 3114-3125. doi: 10.1109/jiot.2018.2833289
Savvidis, R., Pachakis, D. & Giaralis, A. ORCID: 0000-0002-2952-1171 (2018). Optimal seismic upgrade timing in seaports with increasing throughput demand via real options. ASCE-ASME Journal of Risk and Uncertainty in Engineering systems, Part A: Civil Engineering, 5(1), article number 04018048. doi: 10.1061/ajrua6.0001003
Scannapieco, A. F., Feetham, L., Camarena, M. E. & Aouf, N. ORCID: 0000-0001-9291-4077 (2018). Space-oriented navigation solutions with integrated sensor-suite: the I3DS H2020 project. Paper presented at the 69th International Astronautical Congress 2018, 01 May 2018, Bremen, Germany.
Schmitz, A., Ondreka, N., Poleschinski, J. , Fischer, D., Schmitz, H., Klein, A., Bleckmann, H. & Bruecker, C. ORCID: 0000-0001-5834-3020 (2018). The peregrine falcon's rapid dive: on the adaptedness of the arm skeleton and shoulder girdle. Journal of Comparative Physiology A: Neuroethology, Sensory, Neural, and Behavioral Physiology, 204(8), pp. 747-759. doi: 10.1007/s00359-018-1276-y
Shaheen, M. A., Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 & Yamada, S. (2018). Comprehensive FE Study of the Hysteretic Behavior of Steel-Concrete Composite and Noncomposite RWS Beam-to-Column Connections. Journal of Structural Engineering, 144(9), article number 04018150. doi: 10.1061/(asce)st.1943-541x.0002124
Skrekas, P. (2018). Seismic structural assessment scenarios of RC structures subjected to pounding. (Unpublished Doctoral thesis, City, University of London)
Slabaugh, G. G. & Reyes-Aldasoro, C. C. ORCID: 0000-0002-9466-2018 (2018). Guest Editorial: Computer Vision in Cancer Data Analysis. IET Computer Vision, 12(8), pp. 1047-1048. doi: 10.1049/iet-cvi.2018.5606
Smith-Creasey, M., Albalooshi, F. A. & Rajarajan, M. (2018). Continuous face authentication scheme for mobile devices with tracking and liveness detection. Microprocessors and Microsystems, 63, pp. 147-157. doi: 10.1016/j.micpro.2018.07.008
Solis-Lemus, J. A., Stramer, B., Slabaugh, G. G. & Reyes-Aldasoro, C. C. ORCID: 0000-0002-9466-2018 (2018). Analysis of the Interactions of Migrating Macrophages. Communications in Computer and Information Science, 2018, pp. 262-273. doi: 10.1007/978-3-319-95921-4_25
Solis-Lemus, J. A., Stramer, B., Slabaugh, G. G. & Reyes-Aldasoro, C. C. ORCID: 0000-0002-9466-2018 (2018). Shape analysis and tracking of migrating macrophages. 2018 IEEE 15th International Symposium on Biomedical Imaging (ISBI 2018), pp. 1006-1009. doi: 10.1109/ISBI.2018.8363741
Soomro, A., Amiryar, M. E., Pullen, K. R. ORCID: 0000-0001-8501-9226 & Nankoo, D. (2018). Comparison of Performance and Controlling Schemes of Synchronous and Induction Machines Used in Flywheel Energy Storage Systems. Energy Procedia, 151, pp. 100-110. doi: 10.1016/j.egypro.2018.09.034
Soysouvanh, S., Jalil, M. A., Amiri, I. S. , Ali, J., Singh, G., Mitatha, S., Yupapin, P., Grattan, K. T. V. ORCID: 0000-0003-2250-3832 & Yoshida, M. (2018). Ultra-fast electro-optic switching control using a soliton pulse within a modified add-drop multiplexer. Microsystem Technologies, 24(9), pp. 3777-3782. doi: 10.1007/s00542-018-3837-y
Stavropoulos-Vasilakis, E., Koukouvinis, F. ORCID: 0000-0002-3945-3707, Gavaises, E. ORCID: 0000-0003-0874-8534 & Farhat, M. (2018). Cavitation Induction by Projectile Impacting on a Water Jet. Paper presented at the The 10th International Symposium on Cavitation (CAV2018), 14-16 May 2018, Baltimore, USA.
Stefanidou, S.P. & Kappos, A. J. ORCID: 0000-0002-5566-5021 (2018). Bridge-specific fragility analysis: when is it really necessary?. Bulletin of Earthquake Engineering, 17(4), pp. 2245-2280. doi: 10.1007/s10518-018-00525-9
Stefanitsis, D., Malgarinos, I., Strotos, G. , Nikolopoulos, N, Kakaras, E. & Gavaises, M. (2018). Numerical investigation of the aerodynamic breakup of droplets in tandem. International Journal of Multiphase Flow, 113, pp. 289-303. doi: 10.1016/j.ijmultiphaseflow.2018.10.015
Strotos, G., Malgarinos, I., Nikolopoulos, N. , Gavaises, M. ORCID: 0000-0003-0874-8534, Nikas, K-S. & Moustris, K. (2018). Determination of the aerodynamic droplet breakup boundaries based on a total force approach. International Journal of Heat and Fluid Flow, 69, pp. 164-173. doi: 10.1016/j.ijheatfluidflow.2018.01.001
Su, H. & Banerjee, R. (2018). The modal characteristics of high aspect ratio sailplane wings including the effects of bending and torsional rigidities. Journal of Physics: Conference Series, 1048, article number 012010. doi: 10.1088/1742-6596/1048/1/012010
Sun, S., Kovacevic, A. ORCID: 0000-0002-8732-2242, Bruecker, C. ORCID: 0000-0001-5834-3020 , Ghavami, M., Rane, S., Singh, G. & Leto, A. (2018). Experimental Investigation of the Transient Flow in Roots Blower. In: Purdue e-Pubs. 24th International Compressor Engineering Conference, 9 - 12 July 2018, Purdue University, West Lafayette, USA.
Sun, S. H., Kovacevic, A., Bruecker, C. , Leto, A., Singh, G. & Ghavami, M. (2018). Numerical and Experimental Analysis of Transient Flow in Roots Blower. IOP Conference Series: Materials Science and Engineering, 425(1), article number 12024. doi: 10.1088/1757-899x/425/1/012024
Sun, Z. ORCID: 0000-0002-3862-7939 (2018). Converged high-speed schlieren for shock wave boundary layer interaction study. Paper presented at the 19th International Symposium on Applications of Laser and Imaging Techniques to Fluid Mechanics, 16-19 Jul 2018, Lisbon, Portugal.
Sun, Z. ORCID: 0000-0002-3862-7939, Gan, T. & Wu, Y. (2018). Shock wave boundary layer interaction studied by high-speed schlieren. Paper presented at the 19th International Symposium on Applications of Laser and Imaging Techniques to Fluid Mechanics, 16-19 Jul 2018, Lisbon, Portugal.
Sun, Z. ORCID: 0000-0002-3862-7939, Li, Q. & Bruecker, C. ORCID: 0000-0001-5834-3020 (2018). Short wavelength instability in the vortex ring during impingement onto a solid wall. Paper presented at the 19th International Symposium on Applications of Laser and Imaging Techniques to Fluid Mechanics, 16-19 Jul 2018, Lisbon, Portugal.
Sun, Z., Liu, T., Song, G. , Hu, B., Jiang, L., Sun, Z., Wu, Q., Sun, T. ORCID: 0000-0003-3861-8933 & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2018). Early warning platform and its potential for non-coal mine goaf monitoring based on an optical fiber sensing network. Journal of Physics : Conference Series, 1065(25), article number 252018. doi: 10.1088/1742-6596/1065/25/252018
Suwanarat, S., Chiangga, S., Amiri, I. S. , Haider, S. Z., Aziz, M. S., Ali, J., Singh, G., Poznanski, R., Yupapin, P. & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2018). On-chip supercontinuum generation in nanostructured Ge11.5As24Se64.5 chalcogenide waveguides using Panda-ring resonator. Results in Physics, 10, pp. 138-144. doi: 10.1016/j.rinp.2018.05.031
Taflanidis, A. & Giaralis, A. ORCID: 0000-0002-2952-1171 (2018). Multi-objective optimal design of the tuned mass-damper-inerter (TMDI) for stochastically support excited building structures. In: 16th European Conference on Earthquake Engineering- 16ECEE. 16th European Conference on Earthquake Engineering- 16ECEE, 18 - 21 June 2018, Thessaloniki, Greece.
Tahir, S. (2018). Privacy preserving search in large encrypted databases. (Unpublished Doctoral thesis, City, University of London)
Tahir, S., Steponkus, L., Ruj, S. , Rajarajan, M. & Sajjad, A. (2018). A parallelized disjunctive query based searchable encryption scheme for big data. Future Generation Computer Systems, 109, pp. 583-592. doi: 10.1016/j.future.2018.05.048
Talboys, E. & Bruecker, C. ORCID: 0000-0001-5834-3020 (2018). Upstream Shear Layer Stabilisation via Self-Oscillating Trailing Edge Flaplets. Experiments in Fluids, 59(10), article number 145. doi: 10.1007/s00348-018-2598-9
Tamanna, N., Crouch, R.S., Kabir, I. R. & Naher, S. (2018). An Analytical Model to Predict and Minimize the Residual Stress of Laser Cladding Process. Applied Physics A: Materials Science & Processing, 124(2), article number 202. doi: 10.1007/s00339-018-1585-6
Tanghetti, G., Goodey, R.J. ORCID: 0000-0002-9166-8393, McNamara, A. M. ORCID: 0000-0002-3452-0800 & Halai, H. (2018). Plate bearing tests for working platforms. In: McNamara, A. M. ORCID: 0000-0002-3452-0800, Divall, S. ORCID: 0000-0001-9212-5115, Goodey, R.J. ORCID: 0000-0002-9166-8393 , Taylor, N., Stallebrass, S. E. ORCID: 0000-0002-3747-9524 & Panchal, J. P. (Eds.), Physical Modelling in Geotechnics: Proceedings of the 9th International Conference on Physical Modelling in Geotechnics (ICPMG 2018), July 17-20, 2018, London, United Kingdom.
Temami, O., Ayoub, A. ORCID: 0000-0002-2670-9662, Hamadi, D. & Bennoui, I. (2018). Effect of Boundary Conditions on the Behavior of Stiffened and Un-Stiffened Cylindrical Shells. International Journal of Steel Structures, 19(3), pp. 867-878. doi: 10.1007/s13296-018-0173-0
Theocharopoulos, Marios (2018). An automated parametric FE study of perforated steel beams acting in composite with reinforced concrete slabs utilising moment-resisting supports. (Unpublished Doctoral thesis, City, University of London)
Tomas-Rodriguez, M. & Moreno-Ramirez, C. (2018). Dynamic Analysis of Double Wishbone Front Suspension Systems for Sport Motorcycles. Nonlinear Dynamics, 91(4), pp. 2347-2368. doi: 10.1007/s11071-017-4017-9
Uranus, H. P. & Rahman, B. M. A. ORCID: 0000-0001-6384-0961 (2018). Low-loss ARROW waveguide with rectangular hollow core and rectangular low-density polyethylene/air reflectors for terahertz waves. JOURNAL OF NONLINEAR OPTICAL PHYSICS & MATERIALS, 27(03), article number 1850029. doi: 10.1142/s0218863518500297
Vafiadis, D. & Karcanias, N. ORCID: 0000-0002-1889-6314 (2018). Unimodular equivalence and similarity for linear systems. International Journal of Control, 92(9), pp. 2091-2098. doi: 10.1080/00207179.2018.1427892
Vette, T., Burns, G., Bellini, R. , Jr., S. S. G., Borges, C. V. S., Rente, B., Grattan, K. T. V. & Martinez, M. A. G. (2018). Enhancing the Sensitivity of SMS Fiber Sensors by the Use of High Refractive Index Coatings. Proceedings, 13, article number 1106. doi: 10.3390/proceedings2131106
Vidal, A., Rodriguez, C., Koukouvinis, P. ORCID: 0000-0002-3945-3707 , Gavaises, M. ORCID: 0000-0003-0874-8534 & McHugh, M. A. (2018). Modelling of Diesel fuel properties through its surrogates using Perturbed-Chain, Statistical Associating Fluid Theory. International Journal of Engine Research, 21(7), pp. 1118-1133. doi: 10.1177/1468087418801712
Vidal Roncero, A. ORCID: 0000-0001-8177-518X, Gavaises, M. ORCID: 0000-0003-0874-8534, Koukouvinis, P. ORCID: 0000-0002-3945-3707 & Rodriguez, C. (2018). Effect of realistic multicomponent diesel surrogates on predicted in-nozzle flow and cavitation. Paper presented at the ICLASS 2018, 22-26 Jul 2018, Chicago, USA.
Vidal Roncero, A. ORCID: 0000-0001-8177-518X, Koukouvinis, F. ORCID: 0000-0002-3945-3707 & Gavaises, M. ORCID: 0000-0003-0874-8534 (2018). On the effect of realistic multicomponent diesel surrogates on cavitation and in-nozzle flow. Paper presented at the Fuel systems: engines: Inject your ideas, Fuel your technology, 4-5 Dec 2018, London, UK.
Villa-Arango, S., Betancur Sánchez, D., Torres, R. & Kyriacou, P. ORCID: 0000-0002-2868-485X (2018). Use of Transient Time Response as a Measure to Characterize Phononic Crystal Sensors. Basel, Switzerland. doi: 10.20944/preprints201808.0351.v1
Villa-Arango, S., Betancur, D., Torres, R. & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2018). Use of Transient Time Response as a Measure to Characterize Phononic Crystal Sensors. Sensors, 18(11), article number 3618. doi: 10.3390/s18113618
Vimalakanthan, K., Caboni, M., Schepers, J. G. , Pechenik, E. & Williams, P. (2018). Aerodynamic analysis of Ampyx’s airborne wind energy system. Journal of Physics: Conference Series, 1037(6), article number 62008. doi: 10.1088/1742-6596/1037/6/062008
Vimalakanthan, K., Schepers, J. G., Shen, W. Z. , Rahimi, H., Micallef, D., Simao Ferreira, C. J., Jost, E. & Klein, L. (2018). Evaluation of different methods of determining the angle of attack on wind turbine blades under yawed inflow conditions. Journal of Physics: Conference Series, 1037(2), article number 22028. doi: 10.1088/1742-6596/1037/2/022028
Viphavakit, C. (2018). Development of gold enhanced surface plasmon resonance polymer and nanowire waveguides for optical sensing. (Unpublished Doctoral thesis, City, University of London)
Vlahakis, E. E. ORCID: 0000-0002-7039-5314, Milonidis, E., Halikias, G. ORCID: 0000-0003-1260-1383 & IEEE (2018). Cooperative distributed LQR control for longitudinal flight of a formation of non-identical low-speed experimental UAV's. 2018 UKACC 12th International Conference on Control (CONTROL), pp. 295-300. doi: 10.1109/CONTROL.2018.8516853
Vlahakis, L. ORCID: 0000-0002-7039-5314 & Halikias, G. ORCID: 0000-0003-1260-1383 (2018). Model-Matching type-methods and Stability of Networks consisting of non-Identical Dynamic Agents. IFAC-PapersOnLine, 51(23), pp. 426-431. doi: 10.1016/j.ifacol.2018.12.073
Vlahakis, L. ORCID: 0000-0002-7039-5314 & Halikias, G. ORCID: 0000-0003-1260-1383 (2018). Model-Matching type-methods and Stability of Networks consisting of non-Identical Dynamic Agents. Paper presented at the 7th IFAC Workshop on Distributed Estimation and Control in Networked Systems, 27-28 Aug 2018, Groningen, Netherlands. doi: 10.1016/j.ifacol.2018.12.073
Wang, J., Liu, Y., Li, Z. , Wang, Y., Wang, J., Liu, T., Sun, T. ORCID: 0000-0003-3861-8933 & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2018). Fabrication of a high sensitive Ag-nanoparticle substrate and its application to the detection of toxic substances. Journal of Physics: Conference Series, 1065(25), article number 0.25201. doi: 10.1088/1742-6596/1065/25/252010
Wang, J., Ma, Q. ORCID: 0000-0001-5579-6454, Yan, S. ORCID: 0000-0001-8968-6616 & Chabchoub, A. (2018). Persistence of Peregrine Breather in Random Sea States. Physical Review Applied, 9(1), article number 014016. doi: 10.1103/physrevapplied.9.014016
Wang, J., Ma, Q. ORCID: 0000-0001-5579-6454, Yan, S. ORCID: 0000-0001-8968-6616 & Qin, H. (2018). Numerical study on the quantitative error of the Korteweg-de Vries equation for modelling random waves on large scale in shallow water. European Journal of Mechanics - B/Fluids, 71, pp. 92-102. doi: 10.1016/j.euromechflu.2018.04.004
Wang, J., Yan, S. ORCID: 0000-0001-8968-6616 & Ma, Q. ORCID: 0000-0001-5579-6454 (2018). Deterministic numerical modelling of three-dimensional rogue waves on large scale with presence of wind. Procedia IUTAM, 26, pp. 214-226. doi: 10.1016/j.piutam.2018.03.021
Wang, Y., Jiang, T., Wei, Y. , Liu, T., Sun, T. ORCID: 0000-0003-3861-8933 & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2018). TDLAS Detection of propane and butane gas over the near-infrared wavelength range from 1678nm to 1686nm. Journal of Physics: Conference Series, 1065(25), article number 252006. doi: 10.1088/1742-6596/1065/25/252006
Wang, Y., Wei, Y., Liu, T. , Sun, T. ORCID: 0000-0003-3861-8933 & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2018). TDLAS detection of propane/butane gas mixture by using reference gas absorption cells and partial least square (PLS) approach. IEEE Sensors Journal, 18(20), pp. 8587-8596. doi: 10.1109/jsen.2018.2865508
Wang, Z., Li, Y., Zhang, T. , Hu, J., Wei, Y., Liu, T., Sun, T. ORCID: 0000-0003-3861-8933 & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2018). A long-term stable monitoring system for atmospheric carbon monoxide based on 2.3 μm laser absorption. Journal of Physics: Conference Series, 1065(25), article number 252017. doi: 10.1088/1742-6596/1065/25/252017
Wei, Y., Chang, L., Liu, B. , Hu, J., Wang, Y., Li, Y., Wang, Z., Meng, H., Liu, T., Sun, T. ORCID: 0000-0003-3861-8933 & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2018). Laser methane sensor and its field application in coal mine safety. Journal of Physics : Conference Series, 1065(25), article number 252022. doi: 10.1088/1742-6596/1065/25/252022
White, M. ORCID: 0000-0002-7744-1993, Oyewunmi, O. A., Chatzopoulou, M. A. , Pantaleo, A. M., Haslam, A. J. & Markides, C. N. (2018). Computer-aided working-fluid design, thermodynamic optimisation and technoeconomic assessment of ORC systems for waste-heat recovery. Energy, 161, pp. 1181-1198. doi: 10.1016/j.energy.2018.07.098
White, M. ORCID: 0000-0002-7744-1993, Read, M. G. & Sayma, A. I. (2018). Optimisation of cascaded organic Rankine cycle systems for high-temperature waste-heat recovery. Paper presented at the ECOS 2018 - The 31st International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, 17 - 22 June 2018, Guimarães, Portugal.
White, M. ORCID: 0000-0002-7744-1993, Read, M. G. ORCID: 0000-0002-7753-2457 & Sayma, A. I. ORCID: 0000-0003-2315-0004 (2018). Using a cubic equation of state to identify optimal working fluids for an ORC operating with two-phase expansion using a twin-screw expander. In: International Refrigeration and Air Conditioning Conference. 17th International Refrigeration and Air Conditioning Conference, 09-12 Jul 2018, West Lafayette, USA.
White, M. ORCID: 0000-0002-7744-1993 & Sayma, A. I. ORCID: 0000-0003-2315-0004 (2018). Design of a closed-loop optical-access supersonic test facility for organic vapours. In: ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition. ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition, 11-15 Jun 2018, Oslo, Norway. doi: 10.1115/GT2018-75301
White, M. ORCID: 0000-0002-7744-1993 & Sayma, A. I. ORCID: 0000-0003-2315-0004 (2018). A generalised assessment of working fluids and radial turbines for organic Rankine cycles. Energies, 11(4), article number 800. doi: 10.3390/en11040800
White, M. ORCID: 0000-0002-7744-1993 & Sayma, A. I. ORCID: 0000-0003-2315-0004 (2018). A preliminary comparison of different turbine architectures for a 100 kW supercritical CO2 Rankine cycle turbine. Paper presented at the The 6th International Supercritical CO2 Power Cycles Symposium, 27 - 29 Mar 2018, Pittsburgh, Pennsylvania.
Wong, Y. & Crouch, R.S. (2018). A Compact Geometrically Nonlinear FE Shell Code for Cardiac Analysis: Shell Formulation. Paper presented at the 6th European Conference on Computational Mechanics (ECCM 6), 11-15 Jun 2018, Glasgow, UK.
Woodley, M., Silver, J., Hill, L. , Copie, F., Del Bino, L., Zhang, S., Oppo, G-L. & Del'Haye, P. (2018). Universal symmetry-breaking dynamics for the Kerr interaction of counterpropagating light in dielectric ring resonators. Physical Review A, 98(5), article number 053863. doi: 10.1103/physreva.98.053863
Xu, M., Gao, S., Guo, L. , Fu, F. & Zhang, S. (2018). Study on collapse mechanism of steel frame with CFST-columns under column-removal scenario. Journal of Constructional Steel Research, 141, pp. 275-286. doi: 10.1016/j.jcsr.2017.11.020
Yang, Y-F., Liu, M. & Fu, F. ORCID: 0000-0002-9176-8159 (2018). Experimental and numerical investigation on the performance of three-legged CFST latticed columns under lateral cyclic loadings. Thin-Walled Structures, 132, pp. 176-194. doi: 10.1016/j.tws.2018.08.016
Yang, Y. (2018). The social, policy and economy factor in the solar power market potential identification model with the case study for China. (Unpublished Doctoral thesis, City, University of London)
Yazdani Nezhad, H. ORCID: 0000-0003-0832-3579, Stratakis, D., Ayre, D. , Addepalli, S. & Zhao, Y. (2018). Mechanical performance of composite bonded joints in the presence of localised process-induced zero-thickness defects. Procedia Manufacturing, 16, pp. 91-98. doi: 10.1016/j.promfg.2018.10.175
Yazdani Nezhad, H. ORCID: 0000-0003-0832-3579 & Thakur, V. K. (2018). Effect of Morphological Changes due to Increasing Carbon Nanoparticles Content on the Quasi-Static Mechanical Response of Epoxy Resin. Polymers (Basel), 10(10), article number 1106. doi: 10.3390/polym10101106
Youplao, P., Pornsuwancharoen, N., Amiri, I. S. , Jalil, M. A., Aziz, M. S., Ali, J., Singh, G., Yupapin, P. & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2018). Microring stereo sensor model using Kerr–Vernier effect for bio-cell sensor and communication. Nano Communication Networks, 17, pp. 30-35. doi: 10.1016/j.nancom.2018.06.002
Youplao, P., Pornsuwancharoen, N., Suwanarat, S. , Chaiwong, K., Jalil, M. A., Amiri, I. S., Ali, J., Singh, G., Yupapin, P. & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2018). High-density WGM Probes Generated by a ChG Ring Resonator for High-density 3D Imaging and Applications. Microwave and Optical Technology Letters, 60(11), pp. 2689-2693. doi: 10.1002/mop.31477
Youplao, P., Sarapat, N., Porsuwancharoen, N. , Chaiwong, K., Jalil, M. A., Amiri, I. S., Ali, J., Aziz, M. S., Chiangga, S., Singh, G., Yupapin, P. & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2018). Plasmonic Op-Amp Circuit Model using the Inline Successive Microring Pumping Technique. Microsystem Technologies, 24(9), pp. 3689-3695. doi: 10.1007/s00542-018-3823-4
Yu, Y., Guo, Z. & Ma, Q. ORCID: 0000-0001-5579-6454 (2018). Transmission of Water Waves under Multiple Vertical Thin Plates. Water, 10(4), article number 517. doi: 10.3390/w10040517
Yu, Z., Zheng, X. & Ma, Q. ORCID: 0000-0001-5579-6454 (2018). Study on Actuator Line Modeling of Two NREL 5-MW Wind Turbine Wakes. Applied Sciences, 8(3), article number 434. doi: 10.3390/app8030434
Yuriy, S. S., Yrjö, N. & Sanowar, K. ORCID: 0000-0001-5589-6914 (2018). Review of Unbiased FIR Filters, Smoothers, and Predictors for Polynomial Signals. Frontiers in Signal Processing, 2(1), doi: 10.22606/fsp.2018.21001
Zeng, Q., Gonzalez-Avila, S. R., Dijkink, R. , Koukouvinis, P. ORCID: 0000-0002-3945-3707, Gavaises, M. ORCID: 0000-0003-0874-8534 & Ohl, C-D. (2018). Wall shear stress from jetting cavitation bubbles. Journal of Fluid Mechanics, 846, pp. 341-355. doi: 10.1017/jfm.2018.286
Zhang, X. (2018). Multi-model method for simulating 2D Surface-Piercing Wave-Structure Interactions. (Unpublished Doctoral thesis, City, Universtiy of London)
Zhang, H., Zhou, L., Lu, L. , Chen, J. & Rahman, B. M. ORCID: 0000-0001-6384-0961 (2018). Non-volatile Optical Switch Based on a GST-Loaded Directional Coupler. In: 2018 IEEE 3rd Optoelectronics Global Conference (OGC). 2018 the 3rd Optoelectronics Global Conference (OGC 2018), 4-7 Sep 2018, Shenzhen, China. doi: 10.1109/ogc.2018.8529888
Zhang, H., Zhou, L., Rahman, B. M. ORCID: 0000-0001-6384-0961 , Wu, X., Lu, L., Xu, Y., Xu, J., Song, J., Hu, Z., Xu, L. & Chen, J. (2018). Ultracompact Si-GST Hybrid Waveguides for Nonvolatile Light Wave Manipulation. IEEE Photonics Journal, 10(1), pp. 1-10. doi: 10.1109/jphot.2017.2781710
Zhang, H., Zhou, L., Xu, J. , Lu, L., Chen, J. & Rahman, B. M. ORCID: 0000-0001-6384-0961 (2018). All-optical non-volatile tuning of an AMZI-coupled ring resonator with GST phase-change material. Optics Letters, 43(22), pp. 5539-5542. doi: 10.1364/ol.43.005539
Zhang, H., Zhou, L., Xu, J. , Lu, L., Chen, J. & Rahman, B. M. ORCID: 0000-0001-6384-0961 (2018). Silicon microring resonators tuned with GST phase change material. 2018 ASIA COMMUNICATIONS AND PHOTONICS CONFERENCE (ACP), pp. 1-3. doi: 10.1109/ACP.2018.8596200
Zhang, N., Zheng, X., Ma, Q. ORCID: 0000-0001-5579-6454 , Duan, W., Khayyer, A., Lv, X. & Shao, S. (2018). A hybrid stabilization technique for simulating water wave - Structure interaction by incompressible Smoothed Particle Hydrodynamics (ISPH) method. Journal of Hydro-environment Research, 18, pp. 77-94. doi: 10.1016/j.jher.2017.11.003
Zhang, T., Tao, J., Ning, Y. , Hu, J., Liu, T., Sun, T. ORCID: 0000-0003-3861-8933 & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2018). High Precision Synchronous Detection Method for Multi-gas detection using a Single Laser. Journal of Physics : Conference Series, 1065(25), article number 252013. doi: 10.1088/1742-6596/1065/25/252013
Zhang, Z., Xu, G. & Song, J. ORCID: 0000-0003-0623-0395 (2018). CubeSat cloud detection based on JPEG2000 compression and deep learning. Advances in Mechanical Engineering, 10(10), doi: 10.1177/1687814018808178
Zheng, X., Lv, X., Ma, Q. ORCID: 0000-0001-5579-6454 , Duan, W., Khayyer, A. & Shao, S. (2018). An improved solid boundary treatment for wave-float interactions using ISPH method. International Journal of Naval Architecture and Ocean Engineering, 10(3), pp. 329-347. doi: 10.1016/j.ijnaoe.2017.08.001
Zheng, X., Ma, Q. ORCID: 0000-0001-5579-6454 & Shao, S. (2018). Study on SPH Viscosity Term Formulations. Applied Sciences, 8(2), article number 249. doi: 10.3390/app8020249
Zhou, H., Zhang, Y., Fu, F. & Wu, J. (2018). Progressive Collapse Analysis of Reticulated Shell under Severe Earthquake considering the Damage Accumulation Effect. Journal of Performance of Constructed Facilities, 32(2), article number 04018004. doi: 10.1061/(asce)cf.1943-5509.0001129
Zhou, L., Zhang, H., Hu, H. , Lu, L., Chen, J. & Rahman, B. M. ORCID: 0000-0001-6384-0961 (2018). Miniature Silicon Nanobeam Resonator Tuned by GST Phase Change Material. In: CLEO Pacific Rim Conference. Conference on Lasers and Electro-Optics/Pacific Rim 2018, 29 Jul - 3 Aug 2018, Hong Kong, China.
Zhou, Y. & Ma, Q. ORCID: 0000-0001-5579-6454 (2018). A New Interface Identification Technique Based on Absolute Density Gradient for Violent Flows. CMES - Computer Modeling in Engineering and Sciences, 115(2), pp. 131-147. doi: 10.3970/cmes.2018.00249
Zimos, D.K., Mergos, P.E. & Kappos, A. J. (2018). Modelling of R/C members accounting for shear failure localisation: Finite element model and verification. Earthquake Engineering and Structural Dynamics, 47(7), pp. 1631-1650. doi: 10.1002/eqe.3033
Zimos, D.K., Mergos, P.E. & Kappos, A. J. (2018). Modelling of R/C members accounting for shear failure localisation: Hysteretic shear model. Earthquake Engineering and Structural Dynamics, 47(8), pp. 1722-1741. doi: 10.1002/eqe.3037
Zomorodian, M., Yang, G., Belarbi, A. & Ayoub, A. ORCID: 0000-0002-2670-9662 (2018). Behavior of FRP-strengthened RC elements subjected to pure shear. Construction and Building Materials, 170, pp. 378-391. doi: 10.1016/j.conbuildmat.2018.03.004
van Bokhorst, E. (2018). Forcing of the primary and secondary crossflow instability. (Unpublished Doctoral thesis, City, University of London)
2017
Abay, T. Y. & Kyriacou, P. A. (2017). Photoplethysmography for blood volumes and oxygenation changes during intermittent vascular occlusions. Journal of Clinical Monitoring and Computing, 32(3), pp. 447-455. doi: 10.1007/s10877-017-0030-2
Abro, F. I., Rajarajan, M., Chen, T. & Rahulamathavan, Y. (2017). Android application collusion demystified. Communications in Computer and Information Science, 759, pp. 176-187. doi: 10.1007/978-3-319-65548-2_14
Al Zaili, J. ORCID: 0000-0003-4072-2107, Sayma, A. I. ORCID: 0000-0003-2315-0004 & Iaria, D. (2017). Reducing Levelised Cost of Energy and Environmental Impact of a Hybrid Microturbine-Based Concentrated Solar Power Plant. In: Proceedings of Shanghai 2017 Global Power and Propulsion Forum 30th October–1st November, 2017. 2017Global Power and PropulsionForum, 30th October - 1st November 2017, Shanghai, China.
Alwis, L., Bustamante, H., Bremer, K. , Roth, B., Sun, T. & Grattan, K. T. V. (2017). Evaluation of the durability and performance of FBG-based sensors for monitoring moisture in an aggressive gaseous waste sewer environment. Journal of Lightwave Technology, 35(16), pp. 3380-3386. doi: 10.1109/jlt.2016.2593260
Alwis, L., Bustamante, H., Bremer, K. , Roth, B., Sun, T. & Grattan, K. T. V. (2017). A pilot study: Evaluation of sensor system design for optical fibre humidity sensors subjected to aggressive air sewer environment. In: 2016 IEEE SENSORS. . IEEE. doi: 10.1109/ICSENS.2016.7808482
Aminah, N. S., Themistos, C., Hidayat, R. , Djamal, M. & Rahman, B. M. (2017). Evolution of Surface Plasmon Supermodes in Metal-Clad Microwire and its Potential for Biosensing. Journal of Lightwave Technology, 35(21), pp. 4684-4691. doi: 10.1109/jlt.2017.2753318
Amiryar, M. E. & Pullen, K. R. (2017). A Review of Flywheel Energy Storage System Technologies and Their Applications. Applied Sciences, 7(3), article number 286. doi: 10.3390/app7030286
Apostolopoulou, D. ORCID: 0000-0002-9012-9910 & McCulloch, M. (2017). Cascade Hydroelectric Power System Model and its Application to an Optimal Dispatch Design. Paper presented at the IREP’2017 - 10th Bulk Power Systems Dynamics and Control Symposium, 27 Aug - 1 Sep 2017, Espinho, Portugal.
Arsalan, M., Qureshi, A., Khan, A. U. & Rajarajan, M. (2017). Protection of medical images and patient related information in healthcare: Using an intelligent and reversible watermarking technique. Applied Soft Computing Journal, 51, pp. 168-179. doi: 10.1016/j.asoc.2016.11.044
Arunkumar, S., Soyluoglu, B., Sensoy, M. , Srivatsa, M. & Rajarajan, M. (2017). Location attestation and access control for mobile devices using GeoXACML. Journal of Network and Computer Applications, 80, pp. 181-188. doi: 10.1016/j.jnca.2016.11.028
Azabi, Y. O. (2017). Spiral photonic crystal fibers. (Unpublished Doctoral thesis, City, Universtiy of London)
Barbur, J. L., Llapashtica, E., Connolly, D. M. , Sadler, J., Sun, T. & Grattan, K. T. V. (2017). The EMAIL test – measurement of integrated saccade latency and visual processing times without eye-tracking. Aerospace medicine and human performance, 88(3), p298.
Belloni, C., Aouf, N. ORCID: 0000-0001-9291-4077, Merlet, T. & Le Caillec, J. (2017). SAR image segmentation with GMMs. In: International Conference on Radar Systems (Radar 2017). International Conference on Radar Systems (Radar 2017), 23-26 Oct 2017, Belfast, UK.
Bhanushali, R., Ayre, D. & Yazdani Nezhad, H. ORCID: 0000-0003-0832-3579 (2017). Tensile Response of Adhesively Bonded Composite-to-composite Single-lap Joints in the Presence of Bond Deficiency. Procedia CIRP, 59, pp. 139-143. doi: 10.1016/j.procir.2016.09.021
Bianchi, G., Kovacevic, A. & Cipollone, R. (2017). Deforming grid generation for numerical simulations of fluid dynamics in sliding vane rotary machines. Advances in Engineering Software, 112, pp. 180-191. doi: 10.1016/j.advengsoft.2017.05.010
Bianchi, G., Kovacevic, A., Cipollone, R. , Murgia, S. & Contaldi, G. (2017). Grid generation methodology and CFD simulations in sliding vane compressors and expanders. IOP Conference Series: Materials Science and Engineering, 232(1), article number 012053. doi: 10.1088/1757-899x/232/1/012053
Bobba, S. S. & Agrawal, A. (2017). Ultra-broad Mid-IR Supercontinuum Generation in Single, Bi and Tri Layer Graphene Nano-Plasmonic waveguides pumping at Low Input Peak Powers. Scientific Reports, 7(1), article number 10192. doi: 10.1038/s41598-017-10141-3
Brown, C. J., Goodey, R.J. ORCID: 0000-0002-9166-8393 & Rotter, J. M. (2017). Bending of rectangular plates subject to non-uniform pressure distributions relevant to containment structures. Paper presented at the Eurosteel 2017, 13-15 Sep 2017, Copenhagen, Denmark. doi: 10.1002/cepa.140
Bruecker, C. & Mikulich, V. (2017). Sensing of minute airflow motions near walls using pappus-type nature-inspired sensors. PLoS One, 12(6), article number e0179253. doi: 10.1371/journal.pone.0179253
Brücker, C. ORCID: 0000-0001-5834-3020, Schnakenberg, U., Rockenbach, A. & Mikulich, V. (2017). Effect of Cilia Orientation in Metachronal Transport of Microparticles. World Journal of Mechanics, 07(01), pp. 1-10. doi: 10.4236/wjm.2017.71001
Buckney, D. (2017). Clearance management in twin screw compressors. (Unpublished Doctoral thesis, City, University of London)
Budidha, K. & Kyriacou, P. A. (2017). In vivo investigation of ear canal pulse oximetry during hypothermia. Journal of Clinical Monitoring and Computing, 32(1), pp. 97-107. doi: 10.1007/s10877-017-9975-4
Buhl, S., Gleiss, F., Köhler, M. , Hartmann, F., Messig, D., Bruecker, C. & Hasse, C. (2017). A combined numerical and experimental study of the 3D tumble structure and piston boundary layer development during the intake stroke of a gasoline engine. Flow, Turbulence and Combustion, 98(2), pp. 579-600. doi: 10.1007/s10494-016-9754-1
Cabrera-Espana, F. (2017). Analysis of the optical properties of texturing patterns for design of Si solar cells. (Unpublished Doctoral thesis, City, Universtiy of London)
Camara, A., Cristantielli, R., Astiz, M. A. & Malaga-Chuquitaype, C. (2017). Design of hysteretic dampers with optimal ductility for the transverse seismic control of cable-stayed bridges. Earthquake Engineering & Structural Dynamics, 46(11), pp. 1811-1833. doi: 10.1002/eqe.2884
Camara, A., Vazquez, V. F., Ruiz-Teran, A. M. & Paje, S. E. (2017). Influence of the pavement surface on the vibrations induced by heavy traffic in road bridges. Canadian Journal of Civil Engineering, 44(12), pp. 1099-1111. doi: 10.1139/cjce-2017-0310
Castillo-Rivera, S. & Tomas-Rodriguez, M. (2017). Helicopter flap/lag energy exchange study. Nonlinear Dynamics, 88(4), pp. 2933-2946. doi: 10.1007/s11071-017-3422-4
Chatterjee, S., Phillips, J. P. & Kyriacou, P. A. (2017). Investigating optical path in reflectance pulse oximetry using a multilayer monte carlo model. SPIE Proceedings, 10411, doi: 10.1117/12.2281612
Chen, Y., Vidakovic, M., Fabian, M. , Swift, M., Brun, L., Sun, T. & Grattan, K. T. V. (2017). A temperature compensated fibre Bragg grating (FBG)-based sensor system for condition monitoring of electrified railway pantograph. Proceedings of SPIE - The International Society for Optical Engineering, 10323, article number 103236T. doi: 10.1117/12.2263998
Chermak, L., Aouf, N. ORCID: 0000-0001-9291-4077 & Richardson, M. (2017). Scale robust IMU-assisted KLT for stereo visual odometry solution. Robotica, 35(9), pp. 1864-1887. doi: 10.1017/s0263574716000552
Choo, K-K. R., Rana, O. F. & Rajarajan, M. (2017). Cloud Security Engineering: Theory, Practice and Future Research. IEEE Transactions on Cloud Computing, 5(3), pp. 372-374. doi: 10.1109/tcc.2016.2582278
Constantinou, L., Kyriacou, P. A. ORCID: 0000-0002-2868-485X & Triantis, I. (2017). Towards an optimized tetrapolar electrical impedance lithium detection probe for bipolar disorder: A simulation study. 2017 IEEE SENSORS, 2017-D, doi: 10.1109/ICSENS.2017.8234225
Constantinou, L., Triantis, I., Hickey, M. & Kyriacou, P. A. (2017). On the merits of tetrapolar impedance spectroscopy for monitoring lithium concentration variations in human blood plasma. IEEE Transactions on Biomedical Engineering, 64(3), pp. 601-609. doi: 10.1109/tbme.2016.2570125
Costa, A., Loureiro, T., Passerini, F. , Lopez, S., Pietrushka, D., Klepal, M., Halikias, G. ORCID: 0000-0003-1260-1383, Meintanis, I. ORCID: 0000-0002-1920-1801, Moustakidis, S. ORCID: 0000-0002-1090-2177, Karcanias, N. ORCID: 0000-0002-1889-6314, Bucholz, M. & Arias, I. (2017). Development of Future EU District Heating and Cooling Network Solutions, Sharing Experiences and Fostering Collaborations. Proceedings, 1(7), article number 1105. doi: 10.3390/proceedings1071105
Cristofaro, M., Edelbauer, W., Gavaises, M. ORCID: 0000-0003-0874-8534 & Koukouvinis, P. ORCID: 0000-0002-3945-3707 (2017). Numerical simulation of compressible cavitating two-phase flows with a pressure-based solver. In: 28TH CONFERENCE ON LIQUID ATOMIZATION AND SPRAY SYSTEMS, ILASS-EUROPE 2017. ILASS–Europe 2017, 28th Conference on Liquid Atomization and Spray Systems, 6-8 September 2017, Valencia, Spain. doi: 10.4995/ILASS2017.2017.4629
Dai, K., Sheng, C., Zhao, Z. , Yi, Z., Camara, A. & Bitsuamlak, G. (2017). Nonlinear response history analysis and collapse mode study of a wind turbine tower subjected to tropical cyclonic winds. Wind and Structures, 25(1), pp. 79-100. doi: 10.12989/was.2017.25.1.079
Dasari, B. L., Nouri, J. M., Brabazon, D. & Naher, S. (2017). Graphene and derivatives – Synthesis techniques, properties and their energy applications. Energy, 140(1), pp. 766-778. doi: 10.1016/j.energy.2017.08.048
Dasari, B. L., Nouri, J. M., Brabazon, D. & Naher, S. (2017). Parametric study for graphene reinforced aluminum matrix composites production using Box Behnken design. AIP Conference Proceedings, 1892(1), article number 130006. doi: 10.1063/1.5008155
Davenport, J. J., Hickey, M., Phillips, J. P. & Kyriacou, P. A. (2017). Dual pO₂/pCO₂ fibre optic sensing film. The Analyst, 142(10), pp. 1711-1719. doi: 10.1039/c7an00173h
Del Bino, L., Silver, J., Stebbings, S. & Del'Haye, P. (2017). Symmetry Breaking of Counter-Propagating Light in a Nonlinear Resonator. Scientific Reports, 7(1), article number 43142. doi: 10.1038/srep43142
Demirol, E. & Ayoub, A. (2017). Inelastic Displacement Ratios of SSI Systems. Soil Dynamics and Earthquake Engineering, 96, pp. 104-114. doi: 10.1016/j.soildyn.2017.02.010
Dennis, R. & Pullen, K. R. (2017). Vehicles for rural transport services in sub-Saharan Africa. Proceedings of the Institution of Civil Engineers - Transport, 170(6), pp. 321-327. doi: 10.1680/jtran.15.00081
Di Gravio, G., Patriarca, R., Constantino, F. & Sikora, I. (2017). Safety Assessment For An ATM System Change: A Methodology For The ANSPs. PROMET - Traffic & Transportation, 29(1), pp. 99-107. doi: 10.7307/ptt.v29i1.2121
Dissanayake, K. P. W., Wu, W., Nguyen, H. , Sun, T. & Grattan, K. T. V. (2017). Graphene oxide coated long period grating based fibre optic humidity sensor. Proceedings of SPIE - The International Society for Optical Engineering, 10323, article number 1032346. doi: 10.1117/12.2265465
Dissanayake, K. P. W., Wu, W., Nguyen, H. , Sun, T. & Grattan, K. T. V. (2017). Graphene oxide-coated Long Period Grating-based fibre optic sensor for relative humidity and external refractive index. Journal of Lightwave Technology, 36(4), pp. 1145-1151. doi: 10.1109/jlt.2017.2756097
Divall, S. ORCID: 0000-0001-9212-5115, Goodey, R.J. & Stallebrass, S. E. ORCID: 0000-0002-3747-9524 (2017). Twin-tunnelling-induced changes to clay stiffnesses. Géotechnique, 67(10), pp. 906-913. doi: 10.1680/jgeot.sip17.p.151
Divall, S., Taylor, R.N., Stallebrass, S. E. & Goodey, R.J. (2017). Predictions of changes in pore-water pressure around tunnels in clay. Paper presented at the 9th International Symposium on Geotechnical Aspects of Underground Construction in Soft Ground, 4-5 April 2017, Sao Paulo, Brazil.
Efthymiou, E. & Camara, A. (2017). Effect of spatial variability of earthquakes on cable-stayed bridges. Paper presented at the X International Conference on Structural Dynamics, EURODYN 2017, 10-13 Sep 2017, Rome, Italy.
Elombo, A., Morstyn, T., Apostolopoulou, D. ORCID: 0000-0002-9012-9910 & McCulloch, M. D. (2017). Residential Load Variability and Diversity at Different Sampling Time and Aggregation Scales. 2017 IEEE AFRICON, pp. 1331-1336. doi: 10.1109/AFRCON.2017.8095675
Emami, S. D., Lee, H. L., Rahman, M. M. , Abdullah, F., Abdul-Rashid, H. A., Dashtabi, M. M. & Rahman, B. M. (2017). Evolution of Surface Acoustic Waves in an Optical Microfiber. IEEE Journal of Quantum Electronics, 53(5), pp. 1-8. doi: 10.1109/jqe.2017.2747152
Fabian, M., Hind, D., Gerada, C. , Sun, T. & Grattan, K. T. V. (2017). Multi-parameter monitoring of electrical machines using integrated fibre Bragg gratings. Proceedings of SPIE - The International Society for Optical Engineering, 10323, article number 1032311. doi: 10.1117/12.2264928
Faghih, F., Das, D. & Ayoub, A. (2017). Seismic behavior of fiber reinforced steel-concrete composite systems. Procedia Engineering, 171, pp. 899-908. doi: 10.1016/j.proeng.2017.01.386
Favier, J., Li, C., Kamps, L. , Revell, A., O Connor, J. & Brücker, C. (2017). The PELskin project—part I: fluid–structure interaction for a row of flexible flaps: a reference study in oscillating channel flow. Meccanica, 52(8), pp. 1767-1780. doi: 10.1007/s11012-016-0521-0
Fonseca, J. ORCID: 0000-0002-7654-6005 & Camara, A. ORCID: 0000-0002-1675-2640 (2017). Using advanced statistical tools to better understand students’ expectation of teaching. Paper presented at the HEA Annual Conference 2017, 04-06 Jul 2017, Manchester, UK.
Fonseca, J. ORCID: 0000-0002-7654-6005, Sim, W. W., Shire, T. & O'Sullivan, C. (2017). Fabric analysis of internally unstable soils. In: 25th meeting of European Working Group on Internal Erosion in Embankment Dams & their Foundations, EWG-IE. 25th Meeting of the European Working Group on internal erosion in embankment dams & their foundations, 4 - 7 September 2017, Delft.
Gajrani, J., Tripathi, M., Laxmi, V. , Gaur, M. S., Conti, M. & Rajarajan, M. (2017). sPECTRA: a Precise framEwork for analyzing CrypTographic vulneRabilities in Android apps. 2017 14th IEEE Annual Consumer Communications & Networking Conference (CCNC), 48, pp. 854-860. doi: 10.1109/ccnc.2017.7983245
Gao, S., Guo, L., Fu, F. & Zhang, S.H. (2017). Capacity of semi-rigid composite joints in accommodating column loss. Journal of Constructional Steel Research, 139(12), pp. 288-301. doi: 10.1016/j.jcsr.2017.09.029
Ghavami, M. (2017). Cycle analysis and optimisation of micro gas turbines for concentrated solar power. (Unpublished Doctoral thesis, City, University of London)
Ghavami, M. ORCID: 0000-0002-0772-7726, Alzaili, J. ORCID: 0000-0003-4072-2107, Sayma, A. I. ORCID: 0000-0003-2315-0004 & ASME (2017). A Comparative Study of the Control Strategies for Pure Concentrated Solar Power Micro Gas Turbines. In: Proceedings of the ASME Turbo Expo. ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition, 26-30 Jun 2017, Charlotte, NC USA. doi: 10.1115/gt2017-63987
Ghosh, S. & Rahman, B. M. (2017). A Compact Mach-Zehnder Interferometer Using Composite Plasmonic Waveguide for Ethanol Vapor Sensing. Journal of Lightwave Technology, 35(14), pp. 3003-3011. doi: 10.1109/jlt.2017.2703827
Giaralis, A. & Petrini, F. (2017). Optimum design of the tuned mass-damper-inerter for serviceability limit state performance in wind-excited tall buildings. Procedia Engineering, 199, pp. 1773-1778. doi: 10.1016/j.proeng.2017.09.453
Giaralis, A. & Petrini, F. (2017). Wind-induced vibration mitigation in tall buildings using the tuned mass-damper-inerter (TMDI). Journal of Structural Engineering, 143(9), pp. 1-11. doi: 10.1061/(asce)st.1943-541x.0001863
Gkatzogias, K.I. (2017). Performance-based seismic design of concrete bridges for deformation control through advanced analysis tools and control devices. (Unpublished Doctoral thesis, City, Universtiy of London)
Gkoktsi, K. & Giaralis, A. (2017). Assessment of sub-Nyquist deterministic and random data sampling techniques for operational modal analysis. Structural Health Monitoring, 16(5), pp. 630-646. doi: 10.1177/1475921717725029
Gkoktsi, K., Giaralis, A. ORCID: 0000-0002-2952-1171, Klis, R. , Dertimanis, V. & Chatzi, E. (2017). Vibration-based structural performance assessment via output-only sub-Nyquist/compressive wireless sensor data. Paper presented at the 4th Conference on Smart Monitoring, Assessment and Rehabilitation of Civil Structures- SMAR 2017, 13 - 15 September 2017, Zurich, Switzerland.
Glackin, C., Chollet, G., Dugan, N. , Cannings, N., Wall, J., Tahir, S. F., Ray, I. G. & Rajarajan, M. (2017). Privacy preserving encrypted phonetic search of speech data. 2017 IEEE International Conference on Acoustics, Speech and Signal Processing - Proceedings, pp. 6414-6418. doi: 10.1109/icassp.2017.7953391
Goodey, R.J., Brown, C. J. & Rotter, J. M. (2017). Rectangular steel silos: Finite element predictions of filling wall pressures. Engineering Structures, 132, pp. 61-69. doi: 10.1016/j.engstruct.2016.11.023
Gowree, E. R. & Atkin, C. J. (2017). Measurement and modelling of the turbulent boundary layer near the attachment line of a swept wing. Aeronautical Journal, 121(1240), pp. 746-769. doi: 10.1017/aer.2017.30
Gulistan, A., Ghosh, S. ORCID: 0000-0002-1992-2289, Ramachandran, S. & Rahman, B. M. ORCID: 0000-0001-6384-0961 (2017). Efficient strategy to increase higher order inter-modal stability of a step index multimode fiber. Optics Express, 25(24), pp. 29714-29723. doi: 10.1364/oe.25.029714
Habib, K., Jiang, W., Rahman, B. M. & Grattan, K. T. V. (2017). Energy efficiency of iron-boron-silicon metallic glasses in sulfuric acid solutions. Materials Research Express, 4(3), article number 035201. doi: 10.1088/2053-1591/aa60dc
Hashim, Z.Q., Constantinou, L., Kyriacou, P. A. & Triantis, I. (2017). A novel approach to transcutaneous localization of blood vessels using a dynamically reconfigurable electrode (DRE) array. In: 2016 IEEE Biomedical Circuits and Systems Conference (BioCAS). . Institute of Electrical and Electronics Engineers (IEEE). doi: 10.1109/BioCAS.2016.7833822
Hauerhof, E. (2017). The assessment of oil products tanker design methods and technologies to enhance the Energy Efficiency Design Index measure by means of computer simulation and trend analysis. (Unpublished Doctoral thesis, City, University of London)
Holmes, C. S., Rane, S. & Wang, X. (2017). Manufacturing method and performance assessment for variable lead vacuum rotors. IOP Conference Series: Materials Science and Engineering, 232, article number 12022. doi: 10.1088/1757-899X/232/1/012022
Huo, J., Zhang, J., Liu, Y. & Fu, F. (2017). Dynamic Behaviour and Catenary Action of Axially-restrained Steel Beam Under Impact Loading. Structures, 11, pp. 84-96. doi: 10.1016/j.istruc.2017.04.005
Idrees, F., Rajarajan, M., Conti, M. , Chen, T. & Rahulamathavan, Y. (2017). PIndroid: A novel Android malware detection system using ensemble learning methods. Computers and Security, 68, pp. 36-46. doi: 10.1016/j.cose.2017.03.011
Iezzi, M. & Read, M. G. ORCID: 0000-0002-7753-2457 (2017). Enabling solid biomass fired small scale cogeneration systems with the twin screw wet steam expander technology. In: European Biomass Conference and Exhibition Online Proceedings 2017. doi: 10.5071/25thEUBCE2017-ICO.12.2
Ioakim, Panagiotis (2017). A high precision accelerometer-based sensor unit for the acquisition of ultra low distortion seismic signals. (Unpublished Doctoral thesis, City, Universtiy of London)
Ioannou, E. & Sayma, A. I. (2017). Full Annulus Numerical Study of Hot Streaks Propagation in a Hydrogen-rich Syngas-Fired Heavy Duty Axial Turbine. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 231(5), pp. 344-356. doi: 10.1177/0957650917706861
Jawaid, M. M., Rajani, R., Liatsis, P. , Reyes-Aldasoro, C. C. & Slabaugh, G. G. (2017). A Hybrid Energy Model for Region Based Curve Evolution - Application to CTA Coronary Segmentation. Computer Methods and Programs in Biomedicine, 144, pp. 189-202. doi: 10.1016/j.cmpb.2017.03.020
Jawaid, M. M., Rajani, R., Liatsis, P. , Reyes-Aldasoro, C. C. ORCID: 0000-0002-9466-2018 & Slabaugh, G. G. (2017). Improved CTA Coronary Segmentation with a Volume-Specific Intensity Threshold. Paper presented at the Medical Image Understanding and Analysis (MIUA) 2017, 11 Jul 2017, Edinburgh, UK.
Jawaid, M. M., Riaz, A., Rajani, R. , Reyes-Aldasoro, C. C. & Slabaugh, G. G. (2017). Framework for Detection and Localization of Coronary Non-Calcified Plaques in Cardiac CTA using Mean Radial Profiles. Computers in Biology and Medicine, 89, pp. 84-95. doi: 10.1016/j.compbiomed.2017.07.021
Jawaid, M.M. (2017). Detection, localization and quantification of non-calcified coronary plaques in contrast enhanced CT angiography. (Unpublished Doctoral thesis, City, University of London)
Jian, J. (2017). Ultrasound field measurement and modelling for non-destructive testing. (Unpublished Doctoral thesis, City, University of London)
Jiang, W., Sun, X. & Rahman, B. M. (2017). Compact and fabrication-tolerant polarization splitter based on horizontal triple-slot waveguide. Applied Optics, 56(8), pp. 2119-2126. doi: 10.1364/ao.56.002119
Junoh, S. & Aouf, N. ORCID: 0000-0001-9291-4077 (2017). Person Classification Leveraging Convolutional Neural Network for Obstacle Avoidance via Unmanned Aerial Vehicles. In: 2017 WORKSHOP ON RESEARCH, EDUCATION AND DEVELOPMENT OF UNMANNED AERIAL SYSTEMS (RED-UAS). 2017 Workshop on Research, Education and Development of Unmanned Aerial Systems (RED-UAS), 3-5 Oct 2017, Linkoping, Sweden.
Kabir, I. R., Yin, D. & Naher, S. ORCID: 0000-0003-2047-5807 (2017). 3D Thermal Model of Laser Surface Glazing for H13 Tool Steel. AIP Conference Proceedings, 1892, article number 130003. doi: 10.1063/1.5008152
Kabir, I. R., Yin, D., Tamanna, N. & Naher, S. ORCID: 0000-0003-2047-5807 (2017). 3D Thermal Model of Laser Surface Glazing for Ti6Al4V alloy. Applied Sciences,
Kamps, L., Geyer, T. F., Sarradj, E. & Brücker, C. (2017). Vortex shedding noise of a cylinder with hairy flaps. Journal of Sound and Vibration, 388, pp. 69-84. doi: 10.1016/j.jsv.2016.10.039
Karathanassis, I. K., Koukouvinis, P. & Gavaises, M. (2017). Comparative evaluation of phase-change mechanisms for the prediction of flashing flows. International Journal of Multiphase Flow, 95, pp. 257-270. doi: 10.1016/j.ijmultiphaseflow.2017.06.006
Karathanassis, I. K. ORCID: 0000-0001-9025-2866, Koukouvinis, P. ORCID: 0000-0002-3945-3707, Lorenzi, M. , Kontolatis, E., Li, Z., Wang, J., Mitroglou, N. & Gavaises, M. ORCID: 0000-0003-0874-8534 (2017). High-speed X-Ray Phase-Contrast Imaging of String Cavitation in an Enlarged Diesel-Injector Orifice Replica. In: 28TH CONFERENCE ON LIQUID ATOMIZATION AND SPRAY SYSTEMS, ILASS-EUROPE 2017. ILASS–Europe 2017, 28th Conference on Liquid Atomization and Spray Systems, 6 - 8 September 2017, 6 - 8 September 2017 Valencia, Spain. doi: 10.4995/ILASS2017.2017.4996
Karathanassis, I. K., Papanicolaou, E., Belessiotis, V. & Bergeles, G. (2017). Design and experimental evaluation of a parabolic-trough concentrating photovoltaic/thermal (CPVT) system with high-efficiency cooling. Renewable Energy, 101, pp. 467-483. doi: 10.1016/j.renene.2016.09.013
Karcanias, N. ORCID: 0000-0002-1889-6314, Livada, M. & Leventides, J. (2017). System Properties of Implicit Passive Electrical Networks Descriptions. IFAC-PapersOnLine, 50(1), pp. 9242-9247. doi: 10.1016/j.ifacol.2017.08.1285
Karim, M. R., Ahmad, H. & Rahman, B. M. (2017). All-Normal Dispersion Chalcogenide PCF for Ultraflat Mid-Infrared Supercontinuum Generation. IEEE Photonics Technology Letters, 29(21), pp. 1792-1795. doi: 10.1109/lpt.2017.2752214
Karim, M. R., Ahmad, H. & Rahman, B. M. (2017). All-Normal-Dispersion Chalcogenide Waveguides for Ultraflat Supercontinuum Generation in the Mid-Infrared Region. IEEE Journal of Quantum Electronics, 53(2), pp. 1-6. doi: 10.1109/jqe.2017.2677380
Kassem, H. I. (2017). Flutter prediction of metallic and composite wings using coupled DSM-CFD models in transonic flow. (Unpublished Doctoral thesis, City, University of London)
Kechagias-Stamatis, O. & Aouf, N. ORCID: 0000-0001-9291-4077 (2017). Evaluating 3D local descriptors for future LIDAR missiles with automatic target recognition capabilities. The Imaging Science Journal, 65(7), pp. 428-437. doi: 10.1080/13682199.2017.1361665
Kechagias-Stamatis, O., Aouf, N. ORCID: 0000-0001-9291-4077 & Chermak, L. (2017). B-HoD: A Lightweight and Fast Binary Descriptor for 3D Object Recognition and Registration. In: 2017 IEEE 14th International Conference on Networking, Sensing and Control (ICNSC). 2017 IEEE 14th International Conference on Networking, Sensing and Control (ICNSC 2017), 16-18 May 2017, Calabria, Italy. doi: 10.1109/ICNSC.2017.8000064
Kechagias-Stamatis, O., Aouf, N. ORCID: 0000-0001-9291-4077, Nam, D. & Belloni, C. (2017). Automatic X-ray Image Segmentation and Clustering for Threat Detection. In: Proceedings Volume 10432, Target and Background Signatures III. Target and Background Signatures III, 11-14 Sep 2017, Warsaw, Poland. doi: 10.1117/12.2277190
Kennedy, S., Wilson, M. & Rane, S. (2017). Combined Numerical Analysis of an Oil-free Twin Screw Compressor Using 3D CFD and 1D Multi-chamber Thermodynamic Model. IOP Conference Series: Materials Science and Engineering, 232, article number 12080. doi: 10.1088/1757-899X/232/1/012080
Khader, M. A. (2017). Development of a micro gas turbine for concentrated solar power applications. (Unpublished Doctoral thesis, City, University of London)
Khader, M. A. & Sayma, A. I. (2017). Effect of end-wall riblets on radial turbine performance. IOP Conference Series: Materials Science and Engineering, 232(1), article number 012075. doi: 10.1088/1757-899x/232/1/012075
Khan, S. & Gabdullin, N. (2017). Study of magnetic field distribution in anisotropic single twin-boundary magnetic shape memory (MSM) element in actuators. In: Journal of Physics: Conference Series, vol. 903. 8th Joint European Magnetic Symposia (JEMS2016), 21–26 August 2016, Glasgow, UK. doi: 10.1088/1742-6596/903/1/012012
Kiani, J. & Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 (2017). The Effect of Geometric Nonlinearity on the Seismic Performance of Steel Plate Shear Wall (SPSW) Systems. Iranian Journal of Structural Engineering, 4(2), pp. 58-66.
Kohli, N., Rahman, B. M. & Sharma, E. K. (2017). Improved design for SOI based evanescently coupled multilayer spot-size converter. Optical and Quantum Electronics, 49(6), article number 229. doi: 10.1007/s11082-017-1066-8
Koukouvinis, P., Bruecker, C. & Gavaises, M. (2017). Unveiling the physical mechanism behind pistol shrimp cavitation. Scientific Reports, 7(1), pp. 1-12. doi: 10.1038/s41598-017-14312-0
Koukouvinis, P., Karathanassis, I. K. & Gavaises, M. (2017). Prediction of cavitation and induced erosion inside a high-pressure fuel pump. International Journal of Engine Research, 19(3), pp. 360-373. doi: 10.1177/1468087417708137
Koukouvinis, P., Mitroglou, N., Gavaises, M. , Lorenzi, M. & Santini, M. (2017). Quantitative predictions of cavitation presence and erosion-prone locations in a high-pressure cavitation test rig. Journal of Fluid Mechanics, 819, pp. 21-57. doi: 10.1017/jfm.2017.156
Koukouvinis, P., Naseri, H. & Gavaises, M. (2017). Performance of turbulence and cavitation models in prediction of incipient and developed cavitation. International Journal of Engine Research, 18(4), pp. 333-350. doi: 10.1177/1468087416658604
Kovacevic, A. (2017). Algebraic generation of single domain computational grid for twin screw machines. Part I. Implementation. Advances in Engineering Software, 107, pp. 38-50. doi: 10.1016/j.advengsoft.2017.02.003
Kovacevic, A. (2017). Algebraic generation of single domain computational grid for twin screw machines. Part II. Validation. Advances in Engineering Software, 109, pp. 31-43. doi: 10.1016/j.advengsoft.2017.03.001
Kovacevic, A. (2017). Application of numerical grid generation for improved CFD analysis of multiphase screw machines. IOP Conference Series: Materials Science and Engineering, 232(1), article number 012017. doi: 10.1088/1757-899x/232/1/012017
Kovacevic, A. ORCID: 0000-0002-8732-2242 (2017). Foreword. IOP Conference Series: Materials Science and Engineering, 232(1), article number 11001. doi: 10.1088/1757-899X/232/1/011001
Kovacevic, A. (2017). Modeling of Multiphase Twin Screw Machines. Keynote Paper presented at the 8th International Conference on Compressors and Refrigeration, 20-22 Jul 2017, Xi'an, China.
Kovacevic, A., Stosic, N. & Smith, I. K. (2017). Editorial. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 231(1), p. 3. doi: 10.1177/0954408916685022
Kovacevic, A. ORCID: 0000-0002-8732-2242, Vukasinovic, N., Pavkovic, N. & Horak, P. (2017). Evaluation of “Codeve” methodology for teaching npd to virtual design teams. In: Proceedings of the 19th International Conference on Engineering and Product Design Education (E&PDE17), Building Community: Design Education for a Sustainable Future. (pp. 555-560). Glasgow: The Design Society.
Kumar, A. (2017). Investigation of in-nozzle flow characteristics of fuel injectors of IC engines. (Unpublished Doctoral thesis, City, University of London)
Kyriakou, I., Pouliasis, P. K., Papapostolou, N. C. & Andriosopoulos, K. (2017). Freight Derivatives Pricing for Decoupled Mean-Reverting Diffusion and Jumps. Transportation Research Part E: Logistics and Transportation Review, 108, pp. 80-96. doi: 10.1016/j.tre.2017.09.002
Kyriazis, N., Koukouvinis, P. & Gavaises, M. (2017). Numerical investigation of bubble dynamics using tabulated data. International Journal of Multiphase Flow, 93, pp. 158-177. doi: 10.1016/j.ijmultiphaseflow.2017.04.004
Labib, M., Moslehy, Y. & Ayoub, A. (2017). Softening Coefficient of Reinforced Concrete Elements Subjected to Three-Dimensional Loads. Magazine of Concrete Research, 70(1), pp. 11-27. doi: 10.1680/jmacr.17.00094
Lazareva, A., Asad, M. & Slabaugh, G. G. (2017). Learning to Deblur Adaptive Optics Retinal Images. Paper presented at the 14th International Conference, ICIAR 2017, 5-7 Jul 2017, Montreal, Canada.
Le, Binh (2017). The effect of forepole reinforcement on tunnelling-induced movements in clay. (Unpublished Doctoral thesis, City, University of London)
Lei, W., Wu, K., Wang, Y. , Cheng, Y., Zheng, X., Dissado, L. A., Dodd, S. J., Chalashkanov, N. M., Fothergill, J., Zhang, C. & Li, W. (2017). Are Nano-composites Really better DC Insulators? A Study using Silica Nanoparticles in XLPE. IEEE Transactions on Dielectrics and Electrical Insulation, 24(4), pp. 2268-2270. doi: 10.1109/tdei.2017.006613
Leung, Ming (2017). A novel approach to determine building occupancy for cooling energy consumption prediction. (Unpublished Doctoral thesis, City, University of London)
Leventides, J., Meintanis, I. & Karcanias, N. ORCID: 0000-0002-1889-6314 (2017). A Grassmann Matrix Approach for the Computation of Degenerate Solutions for Output Feedback Laws. IFAC-PapersOnLine, 50(1), pp. 10839-10844. doi: 10.1016/j.ifacol.2017.08.2378
Li, Q. (2017). A hybrid model based on functional decomposition for vortex shedding simulations. (Unpublished Doctoral thesis, City, Universtiy of London)
Li, Y., Chen, X., Divall, S. & Zhang, X. (2017). A study into the behaviour of the formation level of an excavation under different unloading patterns in soft deposits. Arabian Journal of Geosciences, 10(19), article number 437. doi: 10.1007/s12517-017-3227-2
Li, Y. & Sayma, A. I. (2017). Computational Fluid Dynamics Simulation of Surge in a Three Stage Axial Compressor. International Journal of Turbines & Sustainable Energy Systems, 1(1), doi: 10.4273/ijtse.1.1.04
Liu, D., Wang, F., Fu, F. & Wang, H. (2017). Experimental Research on the Failure Mechanism of Foam Concrete with C-Channel Embedment. Computers and Concrete, An International Journal, 20(3), pp. 263-273. doi: 10.12989/cac.2017.20.3.263
Liu, F., Fu, F., Wang, Y. & Liu, Q. (2017). Fire performance of non-load-bearing light-gauge slotted steel stud walls. Journal of Constructional Steel Research, 137, pp. 228-241. doi: 10.1016/j.jcsr.2017.06.034
Liu, X. & Banerjee, J. R. (2017). A spectral dynamic stiffness method for free vibration analysis of plane elastodynamic problems. Mechanical Systems and Signal Processing, 87(4), pp. 136-160. doi: 10.1016/j.ymssp.2016.10.017
Llapashtica, E., Sadler, J., Barbur, J. L. , Connolly, D. M., Sun, T. & Grattan, K. T. V. (2017). Integrated saccade latency as a measure of fatigue. Aerospace medicine and human performance, 88(3), p298.
Lorenzi, M. (2017). X-ray computed microtomography applications for complex geometries and multiphase flow. (Unpublished Doctoral thesis, City, University of London)
Lun, Yuen-Ha (2017). Building a model of national shipping centre. (Unpublished Doctoral thesis, City, University of London)
Malgarinos, I. (2017). Development of a two-phase flow model for the investigation of collisions between heavy gasoil droplets and catalytic particles in Fluid Catalytic Cracking Reactors. (Unpublished Doctoral thesis, City, University of London)
Malgarinos, I., Nikolopoulos, N. & Gavaises, M. (2017). Numerical investigation of heavy fuel droplet-particle collisions in the injection zone of a Fluid Catalytic Cracking reactor, Part I: Numerical model and 2D simulations. Fuel Processing Technology, 156, pp. 317-330. doi: 10.1016/j.fuproc.2016.09.014
Malgarinos, I., Nikolopoulos, N. & Gavaises, M. (2017). Numerical investigation of heavy fuel droplet-particle collisions in the injection zone of a Fluid Catalytic Cracking reactor, part II: 3D simulations. Fuel Processing Technology, 156, pp. 43-53. doi: 10.1016/j.fuproc.2016.09.012
Maloku, H., Hamiti, E., Limani, Z. , Papadopoulou Lesta, V., Pitsillides, A. & Rajarajan, M. (2017). A decentralized approach for self-coexistence among heterogeneous networks in TVWS. IEEE Transactions on Vehicular Technology, 67(2), pp. 1302-1312. doi: 10.1109/tvt.2017.2755605
Mamouei, M. H. (2017). Energy efficient adaptive cruise control: Towards benchmarking energy efficiency in the control of partially and fully automated vehicles. (Unpublished Doctoral thesis, City, University of London)
Maraveas, C., Fasoulakis, Z. & Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 (2017). Post-fire assessment and reinstatement of steel structures. Journal of Structural Fire Engineering, 8(2), pp. 181-201. doi: 10.1108/jsfe-03-2017-0028
Maraveas, C., Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 & Nadjai, A. (2017). Fire Resistance of Unprotected Ultra Shallow Floor Beams (USFB): A Numerical Investigation. Fire Technology, 53(2), pp. 609-627. doi: 10.1007/s10694-016-0583-5
Marian, L. & Giaralis, A. (2017). The tuned mass-damper-inerter for harmonic vibrations suppression, attached mass reduction, and energy harvesting. Smart structures and systems, 19(6), pp. 665-678. doi: 10.12989/sss.2017.19.6.665
May, J. M., Kyriacou, P. A. ORCID: 0000-0002-2868-485X & Petros, A. J. (2017). A novel fontanelle probe for sensing oxygen saturation in the neonate. Biomedical Physics and Engineering Express, 3(1), article number 015023. doi: 10.1088/2057-1976/aa5946
Meintanis, I. ORCID: 0000-0002-1920-1801, Halikias, G. ORCID: 0000-0003-1260-1383, Giovenco, R. , Yiotis, A. & Chrysagis, K. (2017). Closed-loop Identification of an Industrial Extrusion Process. IFAC-PapersOnLine, 50(1), pp. 15604-15609. doi: 10.1016/j.ifacol.2017.08.1888
Meng, Xiangyin (2017). Coupling of nanofluid flow, heat transfer and nanoparticles sedimentation using OpenFOAM. (Unpublished Doctoral thesis, City, University of London)
Menikou, G. (2017). Design and development of magnetic resonance imaging (MRI) compatible tissue mimicking phantoms for evaluating focused ultrasound thermal protocols. (Unpublished Doctoral thesis, City, University of London)
Mergos, P.E. (2017). Contribution to sustainable seismic design of reinforced concrete members through embodied CO2 emissions optimization. Structural Concrete, 19(2), pp. 454-462. doi: 10.1002/suco.201700064
Milonidis, E., Miah, S., Kaparias, I. , Stirling, D. & Karcanias, N. ORCID: 0000-0002-1889-6314 (2017). Cyclist 360° Alert: Validation of an Instrumented Bicycle Trajectory Reconstruction Mechanism Using Satellite and Inertial Navigation Systems. Paper presented at the UTSG 49th Annual Conference, 04 - 06 January 2017, Dublin, Ireland.
Mitroglou, N., Stamboliyski, V., Karathanassis, I. K. , Nikas, K.S. & Gavaises, M. (2017). Cloud cavitation vortex shedding inside an injector nozzle. Experimental Thermal and Fluid Science, 84, pp. 179-189. doi: 10.1016/j.expthermflusci.2017.02.011
Mitseas, I., Kougioumtzoglou, I., Giaralis, A. & Beer, M. (2017). A Stochastic Dynamics Approach for Seismic Response Spectrum-Based Analysis of Hysteretic MDOF Structures. Paper presented at the 12th International Conference on Structural Safety & Reliability, 6-10 Aug 2017, Vienna, Austria.
Nadimi, S., Di Pasquale, L. & Fonseca, J. (2017). Influence of fine fraction on breakage of binary granular materials. Paper presented at the 19th International Conference on Soil Mechanics and Geotechnical Engineering, 17-22 Sep 2017, Seoul, Korea.
Nadimi, S. & Fonseca, J. (2017). Comparison between a μFE model and DEM for an assembly of spheres under triaxial compression. Paper presented at the Powders and Grains 2017 – 8th International Conference on Micromechanics on Granular Media, 3-7 July 2017, Montpellier, France. doi: 10.1051/epjconf/201714015002
Nadimi, S. & Fonseca, J. (2017). On the tensile strength of soil grains in Hertzian response. Paper presented at the Powders and Grains 2017 – 8th International Conference on Micromechanics on Granular Media, 3-7 July 2017, Montpellier, France. doi: 10.1051/epjconf/201714007001
Nadimi, S. & Fonseca, J. (2017). On the torsional loading of elastoplastic spheres in contact. Paper presented at the International Conference on Micromechanics of Granular Media, 3-7 Jul 2017, Montepellier, France. doi: 10.1051/epjconf/201714005001
Nadimi, S. & Fonseca, J. (2017). Single-Grain Virtualization for Contact Behavior Analysis on Sand. Journal of Geotechnical and Geoenvironmental Engineering, 143(9), article number 06017010. doi: 10.1061/(asce)gt.1943-5606.0001740
Nadimi, S. & Fonseca, J. (2017). A micro finite element model for soil behaviour: Numerical validation. Géotechnique, 68(4), pp. 364-369. doi: 10.1680/jgeot.16.p.163
Nadimi, S. & Fonseca, J. (2017). A micro finite-element model for soil behaviour. Géotechnique, 68(4), pp. 290-302. doi: 10.1680/jgeot.16.p.147
Nadimi, S., Kong, D. & Fonseca, J. (2017). From imaging to prediction of carbonate sand behaviour. Paper presented at the ICTMS 2017, 26-30 Jun 2017, Lund, Sweden.
Nadimi Shahraki, S. (2017). Stress Transmission in a Granular System. (Unpublished Doctoral thesis, City, University of London)
Naughton, D. T., Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979, Maraveas, C. & Nicolaou, A. (2017). Pushover analysis of steel seismic resistant frames with reduced web section and reduced beam section connections. Frontiers in Built Environment, 3, doi: 10.3389/fbuil.2017.00059
Ndamuso, N. (2017). Parametric studies of cavitation dependence on hydrocarbon and biodiesel fuel injection flows. (Unpublished Doctoral thesis, City, University of London)
Nguyen, K., Camara, A., Rio, O. & Sparowitz, L. (2017). Dynamic Effects of Turbulent Crosswind on the Serviceability State of Vibrations of a Slender Arch Bridge Including Wind-Vehicle-Bridge Interaction. Journal of Bridge Engineering, 22(11), article number 06017005. doi: 10.1061/(asce)be.1943-5592.0001110
Nguyen, T.H., Wren, S., Sun, T. & Grattan, K. T. V. (2017). Development of a fiber-optic chemical sensor for the detection of cadmium. Proceedings of IEEE Sensors, doi: 10.1109/ICSENS.2016.7808852
Njoum, H. & Kyriacou, P. A. (2017). Photoplethysmography for the Assessment of Haemorheology. Scientific Reports, 7(1), pp. 1-11. doi: 10.1038/s41598-017-01636-0
Ohadi, A. (2017). Adaptive inspection regime for reinforced concrete short to medium span bridges with stochastic deterioration. (Unpublished Doctoral thesis, City, University of London)
Ostmann, S., Chaves, H. & Bruecker, C. (2017). Path instabilities of light particles rising in a liquid with background rotation. Journal of Fluids and Structures, 70, pp. 403-416. doi: 10.1016/j.jfluidstructs.2017.02.007
Pacholak, S. & Brücker, C. (2017). Size does matter: The use of fish motion for improving human swimming simulations. Applied Mathematical Modelling, 46, pp. 339-353. doi: 10.1016/j.apm.2017.01.080
Pal, A., Dhar, A., Ghosh, A. , Sen, R., Hooda, B., Rastogi, V., Ams, M., Fabian, M., Sun, T. & Grattan, K. T. V. (2017). Sensors for Harsh Environment: Radiation Resistant FBG Sensor System. Journal of Lightwave Technology, 35(16), pp. 3393-3398. doi: 10.1109/jlt.2016.2598666
Panagopoulos, I., Atkin, C.J. & Sikora, I. (2017). Developing a performance indicators lean-sigma framework for measuring aviation system’s safety performance. Transportation Research Procedia, 22, pp. 35-44. doi: 10.1016/j.trpro.2017.03.005
Paniagua, P., Fonseca, J., Gylland, A. S. & Nordal, S. (2017). Investigation of the change in soil fabric during cone penetration in silt using 2D measurements. Acta Geotechnica, 13(1), pp. 135-148. doi: 10.1007/s11440-017-0559-8
Papadopoulos, K., Gerotziafas, G. T. & Gavaises, M. ORCID: 0000-0003-0874-8534 (2017). Modelling of thrombin generation under flow in realistic left anterior descending geometries. Medical Engineering & Physics, 50, pp. 50-58. doi: 10.1016/j.medengphy.2017.10.001
Papadopoulos, N. (2017). In vitro and in vivo investigation of enzymatic clot lysis through non-thermal mechanisms using focused ultrasound waves as an adjunct to thrombolytic drug tenecteplase and in synergy with microbubbles. (Unpublished Doctoral thesis, City, University of London)
Papadopoulos, N., Kyriacou, P. A. & Damianou, C. (2017). Review of Protocols Used in Ultrasound Thrombolysis. Journal of Stroke and Cerebrovascular Diseases, 26(11), pp. 2447-2469. doi: 10.1016/j.jstrokecerebrovasdis.2017.07.032
Patel, Z., Thaha, M. A. & Kyriacou, P. A. (2017). Development of an intraluminal intestinal photoplethysmography sensor. Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS, pp. 1840-1843. doi: 10.1109/EMBC.2017.8037204
Petroulakis, N. E., Fysarakis, K., Askoxylakis, I. G. & Spanoudakis, G. (2017). Reactive Security for SDN/NFV-enabled Industrial Networks leveraging Service Function Chaining. Transactions on Emerging Telecommunications Technologies, 29(7), article number e3269. doi: 10.1002/ett.3269
Qaban, A., Mintz, B., Kang, S. E. & Naher, S. (2017). Hot ductility of high Al TWIP steels containing Nb and Nb-V. Materials Science and Technology, 33(14), pp. 1645-1656. doi: 10.1080/02670836.2017.1309097
Qaban, A., Mintz, B. & Naher, S. (2017). Hot rolled high Al containing steels as a replacement for the control rolled high strength low alloy (HSLA) steels. AIP Conference Proceedings, 1892(1), article number 130007. doi: 10.1063/1.5008156
Quadir, A. (2017). Finite element characterisation of plasmonic waveguides in terahertz and optical frequencies. (Unpublished Doctoral thesis, City, University of London)
Ray, I. G. & Rajarajan, M. (2017). A public key encryption scheme for string identification. 2017 IEEE Trustcom/BigDataSE/ICESS, 2014, pp. 104-111. doi: 10.1109/trustcom/bigdatase/icess.2017.226
Read, M. G., Smith, I. K. & Stosic, N. (2017). Internally geared screw machines with ported end plates. IOP Conference Series: Materials Science and Engineering, 232(1), article number 012058. doi: 10.1088/1757-899x/232/1/012058
Read, M. G., Smith, I. K. & Stosic, N. (2017). Optimisation of power generation cycles using saturated liquid expansion to maximise heat recovery. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 231(1), pp. 57-69. doi: 10.1177/0954408916679202
Read, M. G. ORCID: 0000-0002-7753-2457, Stosic, N. & Smith, I. K. ORCID: 0000-0003-1524-9880 (2017). Geometrical aspects of novel internally geared screw machine. In: Refrigeration Science and Technology. Compressors 2017 - 9th International Conference on Compressors and Coolants, 6-9 Sept 2017, Bratislava, Slovakia. doi: 10.18462/iir.compr.2017.0241
Read, M. G. ORCID: 0000-0002-7753-2457, Stosic, N. & Smith, I. K. ORCID: 0000-0003-1524-9880 (2017). Operational characteristics of internally geared positive displacement screw machines. In: ASME 2017 International Mechanical Engineering Congress and Exposition. doi: 10.1115/IMECE2017-70228
Reyes-Aldasoro, C. C. (2017). The proportion of cancer related entries in PubMed has increased considerably. Paper presented at the 2017 NCRI Conference, 5-8 Nov 2017, Liverpool, UK.
Reyes-Aldasoro, C. C. (2017). The proportion of cancer-related entries in PubMed has increased considerably; is cancer truly "The Emperor of All Maladies"?. PLoS One, 12(3), article number e0173671. doi: 10.1371/journal.pone.0173671
Reyes-Aldasoro, C. C., Björndahl, M. A., Kanthou, C. & Tozer, G. M. (2017). Topological analysis of the vasculature of angiopoietin-expressing tumours through scale-space tracing. Communications in Computer and Information Science, 723, pp. 285-296. doi: 10.1007/978-3-319-60964-5_25
Reyes-Aldasoro, C. C. & Slabaugh, G. G. (2017). Special issue: medical image understanding and analysis. Computer Methods in Biomechanics and Biomedical Engineering: Imaging and Visualization, 5(5), article number 317. doi: 10.1080/21681163.2015.1081080
Rodriguez, C., Vidal Roncero, A., Koukouvinis, P. ORCID: 0000-0002-3945-3707 & Gavaises, M. ORCID: 0000-0003-0874-8534 (2017). Supercritical and transcritical real-fluid mixing using the PC-SAFT EOS. In: 28TH CONFERENCE ON LIQUID ATOMIZATION AND SPRAY SYSTEMS, ILASS-EUROPE 2017. ILASS 2017 - 28th European Conference on Liquid Atomization and Spray Systems, 6 - 8 September 2017, Valencia, Spain. doi: 10.4995/ILASS2017.2017.5000
Ruiz, J. A. D. & Aouf, N. ORCID: 0000-0001-9291-4077 (2017). Real-Time Setup with PD and Backstepping Control for a Pelican Quadrotor. In: Gusikhin, O. & Madani, K. (Eds.), Proceedings of the 14th International Conference on Informatics in Control, Automation and Robotics. 14th International Conference on Informatics in Control, Automation and Robotics, 26-28 Jul 2017, Madrid, Spain.
Ruiz, J. A. D. & Aouf, N. (2017). Unscented Kalman Filter for Vision based Target Localisation with a Quadrotor. In: Gusikhin, O. & Madani, K. (Eds.), Proceedings of the 14th International Conference on Informatics in Control, Automation and Robotics. 14th International Conference on Informatics in Control, Automation and Robotics, 26-28 Jul 2017, Madrid, Spain.
Saadat Beheshti, S. M. R., Liatsis, P. & Rajarajan, M. (2017). A CAPTCHA model based on visual psychophysics: Using the brain to distinguish between human users and automated computer bots. Computers and Security, 70, pp. 596-617. doi: 10.1016/j.cose.2017.08.006
Saadatbeheshti, S. (2017). A Novel Human Visual Psychophysics Based Approach to Distinguish Between Human Users and Computer Robots. (Unpublished Doctoral thesis, City, University of London)
Sadowski, A.J., Camara, A., Malaga-Chuquitaype, C. & Dai, K. (2017). Seismic analysis of a tall metal wind turbine support tower with realistic geometric imperfections. Earthquake Engineering and Structural Dynamics, 46(2), pp. 201-219. doi: 10.1002/eqe.2785
Sayma, A. I. (2017). Gas Turbines for Marine Applications. In: Carlton, J., Jukes, P. & Sang, C-Y. (Eds.), Encyclopedia of Maritime and Offshore Engineering. (pp. 1-10). John Wiley & Sons, Ltd.. doi: 10.1002/9781118476406.emoe227
Sayma, A. I., Iaria, D., Khader, M. & Al Zaili, J. ORCID: 0000-0003-4072-2107 (2017). Multi-Objective Optimisation of A Centrifugal Compressor for a Micro Gas Turbine Operated by Concentrated Solar Power. In: Proceedings of the Global Power and Propulsion Forum 2017.
Shaheen, M. A., Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 & Salem, E. (2017). Effect of grout properties on shear strength of column base connections: FEA and analytical approach. Engineering Structures, 152, pp. 307-319. doi: 10.1016/j.engstruct.2017.08.065
Shi, S., Li, H., Fabian, M. , Sun, T., Grattan, K. T. V., Xu, D., Basheer, P.A.M. & Bai, Y. (2017). Alkali-activated Fly Ash Manufactured with Multi-stage Microwave Curing. In: Proceedings of the Fourth International Conference on Sustainable Construction Materials and Technologies. . CreateSpace Independent Publishing Platform.
Shmaliy, Y. S., Khan, S., Zhao, S. & Ibarra-Manzano, O. (2017). General Unbiased FIR Filter With Applications to GPS-Based Steering of Oscillator Frequency. IEEE Transactions on Control Systems Technology, 25(3), pp. 1141-1148. doi: 10.1109/tcst.2016.2583961
Silver, J., Guo, C., Del Bino, L. & Del’Haye, P. (2017). Kerr superoscillator model for microresonator frequency combs. Physical Review A, 95(3), article number 033835. doi: 10.1103/physreva.95.033835
Smith-Creasey, M. & Rajarajan, M. (2017). Adaptive threshold scheme for touchscreen gesture continuous authentication using sensor trust. 2017 IEEE Trustcom/BigDataSE/ICESS, pp. 554-561. doi: 10.1109/Trustcom/BigDataSE/ICESS.2017.284
Solis-Lemus, J. A., Stramer, B., Slabaugh, G. G. & Reyes-Aldasoro, C. C. ORCID: 0000-0002-9466-2018 (2017). Segmentation and Shape Analysis of Macrophages Using Anglegram Analysis. Journal of Imaging, 4(1), article number 2. doi: 10.3390/jimaging4010002
Soltanian, M. R. K., Masdari, M. ORCID: 0000-0002-1159-2406 & Tirandaz, M. R. (2017). Effect of an end plate on surface pressure distributions of two swept wings. Chinese Journal of Aeronautics, 30(5), pp. 1631-1643. doi: 10.1016/j.cja.2017.07.008
Somani, G., Gaur, M. S., Sanghi, D. , Conti, M. & Rajarajan, M. (2017). Scale Inside-Out: Rapid Mitigation of Cloud DDoS Attacks. IEEE Transactions on Dependable and Secure Computing, 15(6), pp. 959-973. doi: 10.1109/tdsc.2017.2763160
Somani, G., Gaur, M. S., Sanghi, D. , Conti, M., Rajarajan, M. & Buyya, R. (2017). Combating DDoS attacks in the cloud: Requirements, trends, and future directions. IEEE Cloud Computing, 4(1), pp. 22-32. doi: 10.1109/mcc.2017.14
Stefanidou, S.P. & Kappos, A. J. (2017). Methodology for the development of bridge-specific fragility curves. Earthquake Engineering and Structural Dynamics, 46(1), pp. 73-93. doi: 10.1002/eqe.2774
Stefanidou, S.P., Sextos, A., Kotsoglou, A. N. , Lesgidis, N. & Kappos, A. J. (2017). Soil-structure interaction effects in analysis of seismic fragility of bridges using an intensity-based ground motion selection procedure. Engineering Structures, 151, pp. 366-380. doi: 10.1016/j.engstruct.2017.08.033
Stefanitsis, D., Malgarinos, I., Strotos, G. , Nikolopoulos, N., Kakaras, E. & Gavaises, M. ORCID: 0000-0003-0874-8534 (2017). Numerical investigation of the aerodynamic breakup of Diesel and heavy fuel oil droplets. International Journal of Heat and Fluid Flow, 68, pp. 203-215. doi: 10.1016/j.ijheatfluidflow.2017.10.012
Sun, T., Fabian, M., Chen, Y. , Vidakovic, M., Javdani, S., Grattan, K. T. V., Carlton, J., Gerada, C. & Brun, L. (2017). Optical fibre sensing: A solution for industry. Proceedings of SPIE, 10323, article number 103231H. doi: 10.1117/12.2272471
Sun, Z. & Bruecker, C. (2017). Investigation of the Vortex Ring Transition using Scanning Tomo-PIV. Experiments in Fluids, 58(4), pp. 1-12. doi: 10.1007/s00348-017-2322-1
Sun, Z. ORCID: 0000-0002-3862-7939 & Bruecker, C. ORCID: 0000-0001-5834-3020 (2017). Vortex ring impingement measured by scanning PIV. Paper presented at the 12th International Symposium on Particle Image Velocimetry, 18-22 Jun 2017, Busan, South Korea.
Tahani, M., Masdari, M. ORCID: 0000-0002-1159-2406, Eivazi, H. & Tatar, M. (2017). Assessment of turbulence models for transonic oscillating airfoil. International Journal of Numerical Methods for Heat & Fluid Flow, 27(11), pp. 2603-2628. doi: 10.1108/hff-04-2016-0142
Tahir, S. F., Ruj, S., Rahulamathavan, Y. , Rajarajan, M. & Glackin, C. (2017). A New Secure and Lightweight Searchable Encryption Scheme over Encrypted Cloud Data. IEEE Transactions on Emerging Topics in Computing, 7(4), pp. 530-544. doi: 10.1109/tetc.2017.2737789
Tahir, S. F., Ruj, S. & Rajarajan, M. (2017). An efficient disjunctive query enabled ranked searchable encryption scheme. 2017 IEEE Trustcom/BigDataSE/ICESS, 7859, pp. 425-432. doi: 10.1109/trustcom/bigdatase/icess.2017.267
Tamanna, N., Crouch, R.S. & Naher, S. ORCID: 0000-0003-2047-5807 (2017). A One-dimensional Analysis of the Distribution of Temperature, Stress and Strain in the co-axial Laser Cladding Process. AIP Conference Proceedings, 1892, article number 040015. doi: 10.1063/1.5008041
Theophilou, A-A. I., Chryssanthopoulos, M. K. & Kappos, A. J. (2017). A vector-valued ground motion intensity measure incorporating normalized spectral area. Bulletin of Earthquake Engineering, 15(1), pp. 249-270. doi: 10.1007/s10518-016-9959-7
Thomaidis, I. M., Camara, A. & Kappos, A. J. (2017). Simulating the Response of Free-Standing Rocking Rigid Blocks using Abaqus/Standard. Paper presented at the 2017 SIMULIA UK Regional User Meeting, October 18 - 19, 2017, Cheshire, UK.
Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979, Pilbin, C. & Lau, C. K. (2017). FE parametric study of RWS/WUF-B moment connections with elliptically-based beam web openings under monotonic and cyclic loading. International Journal of Steel Structures, 17(2), pp. 677-694. doi: 10.1007/s13296-017-6023-7
Tvrdojevic, M., Priesching, P., Tap, F. & Goryntsev, D. (2017). Applying a Tabulated Chemistry Approach for the Calculation of Combustion and Emissions in Diesel Engines. Paper presented at the 8th European Combustion Meeting (ECM 2017), 18-21 Apr 2017, Dubrovnik, Croatia.
Ulman, V., Maska, M., Magnusson, K. E. G. , Ronneberger, O., Haubold, C., Harder, N., Matula, P., Matula, P., Svoboda, D., Radojevic, M., Smal, I., Rohr, K., Jalden, J., Blau, H. M., Dzyubachyk, O., Lelieveldt, B., Xiao, P., Li, Y., Cho, S-Y., Dufour, A C., Olivo-Marin, J-C., Reyes-Aldasoro, C. C., Solis-Lemus, J. A., Bensch, R., Brox, T., Stegmaier, J., Mikut, R., Wolf, S., Hamprecht, F. A., Esteves, T., Quelhas, P., Demirel, O., Malmstrom, L., Jug, F., Tomancak, P., Meijering, E., Munoz-Barrutia, A., Kozubek, M. & Ortiz-de-Solorzano, C. (2017). An objective comparison of cell-tracking algorithms. Nature Methods, 14(12), pp. 1141-1152. doi: 10.1038/nmeth.4473
Unamba, C. K., White, M. ORCID: 0000-0002-7744-1993, Sapin, P. , Freeman, J., Lecompte, S., Oyewunmi, O. A. & Markides, C. N. (2017). Experimental Investigation of the Operating Point of a 1-kW ORC System. Energy Procedia, 129, pp. 875-882. doi: 10.1016/j.egypro.2017.09.211
Vafiadis, D. & Karcanias, N. ORCID: 0000-0002-1889-6314 (2017). Unimodular Transformations and Canonical Forms for Singular Systems. IFAC-PapersOnLine, 50(1), pp. 10816-10821. doi: 10.1016/j.ifacol.2017.08.2356
Vanderwel, C., Placidi, M. & Ganapathisubramani, B. (2017). Wind resource assessment in heterogeneous terrain. Philos Trans A Math Phys Eng Sci, 375(2091), article number 20160109. doi: 10.1098/rsta.2016.0109
Vasilakos, I. (2017). Cavitation in the cylinder-liner and piston-ring interaction in internal combustion engines. (Unpublished Doctoral thesis, City, University of London)
Vidakovic, M. (2017). Optical Fibre Sensors applied to condition and structural monitoring for the marine and rail transport sectors. (Unpublished Doctoral thesis, City, Universtiy of London)
Villa-Arango, S., Betancur Sánchez, D., Torres, R. , Kyriacou, P. A. & Lucklum, R. (2017). Differential Phononic Crystal Sensor: Towards a Temperature Compensation Mechanism for Field Applications Development. Sensors, 17(9), article number 1960. doi: 10.3390/s17091960
Villa-Arango, S., Torres, R., Kyriacou, P. A. & Lucklum, R. (2017). Acoustic spectrometer: Resonant sensing platform for measuring volumetric properties of liquid samples. IFMBE Proceedings, 60, pp. 70-73. doi: 10.1007/978-981-10-4086-3_18
Villa-Arango, S., Torres Villa, R., Kyriacou, P. A. & Lucklum, R. (2017). Fully-disposable multilayered phononic crystal liquid sensor with symmetry reduction and a resonant cavity. Measurement: Journal of the International Measurement Confederation, 102, pp. 20-25. doi: 10.1016/j.measurement.2017.01.051
Viphavakit, C., Patchoo, W., Boonruang, S. , Themistos, C., Komodromos, M., Mohammed, W. S. & Rahman, B. M. (2017). Demonstration of Polarization-Independent Surface Plasmon Resonance Polymer Waveguide for Refractive Index Sensing. Journal of Lightwave Technology, 35(14), pp. 3012-3019. doi: 10.1109/jlt.2017.2711959
Wang, J., Ma, Q. & Yan, S. (2017). On differences of rogue waves modeled by three approaches in numerical wave tank. Proceedings of the International Offshore and Polar Engineering Conference, 2017, pp. 440-447.
Wang, J., Ma, Q. & Yan, S. (2017). On quantitative errors of two simplified unsteady models for simulating unidirectional nonlinear random waves on large scale in deep sea. Physics of Fluids, 29(6), article number 067107. doi: 10.1063/1.4989417
Wang, J., Zhao, L., Liu, T. , Li, Z., Sun, T. & Grattan, K. T. V. (2017). Novel Negative Pressure Wave-based Pipeline Leak Detection System Using Fiber Bragg Grating-based Pressure Sensors. Journal of Lightwave Technology, 35(16), pp. 3366-3373. doi: 10.1109/jlt.2016.2615468
Wang, Q. & Grattan, K. T. V. (2017). Suppression of subsidiary fringes in white light interferometry utilising two-wavelength light source. Optics Communications, 403, pp. 121-126. doi: 10.1016/j.optcom.2017.07.029
Wang, Y., Wei, Y., Chang, J. , Zhang, T., Liu, T., Sun, T. & Grattan, K. T. V. (2017). Tunable diode laser absorption spectroscopy based detection of propane for explosion early warning by using a vertical cavity surface enhanced laser source and principle component analysis approach. IEEE Sensors Journal, 17(15), pp. 4975-4982. doi: 10.1109/jsen.2017.2713769
Wang, Z., Zhang, Q., Yan, Y. , Liu, K. & Ligrani, P. M. (2017). Secondary flows and extra heat transfer enhancement of ribbed surfaces with jet impingement. Numerical Heat Transfer Part A, 72(9), pp. 669-680. doi: 10.1080/10407782.2017.1394139
White, M. ORCID: 0000-0002-7744-1993, Markides, C. & Sayma, A. I. (2017). Working-Fluid replacement in supersonic organic Rankine Cycle Turbines. Journal of Engineering for Gas Turbines and Power, 140(9), article number 091703. doi: 10.1115/1.4038754
White, M. ORCID: 0000-0002-7744-1993, Oyewunmi, O. A., Chatzopoulou, M. T. , Pantaleo, A. M., Haslam, A. J. & Markides, C. N. (2017). Integrated computer-aided working-fluid design and thermoeconomic ORC system optimisation. Energy Procedia, 129, pp. 152-159. doi: 10.1016/j.egypro.2017.09.095
White, M. ORCID: 0000-0002-7744-1993, Oyewunmi, O. A., Haslam, A. J. & Markides, C. N. (2017). Industrial waste-heat recovery through integrated computer-aided working-fluid and ORC system optimisation using SAFT-Γ Mie. Energy Conversion and Management, 150, pp. 851-869. doi: 10.1016/j.enconman.2017.03.048
White, M. ORCID: 0000-0002-7744-1993, Sayma, A. I. & Markides, C. (2017). Supersonic flow of non-ideal fluids in nozzles: An application of similitude theory and lessons for ORC turbine design and flexible use considering system performance. Journal of Physics: Conference Series, 821(1), article number 012002. doi: 10.1088/1742-6596/821/1/012002
Wieszok, Z., Aouf, N., Kechagias-Stamatis, O. & Chermak, L. (2017). Stixel Based Scene Understanding for Autonomous Vehicles. 2017 IEEE 14th International Conference on Networking, Sensing and Control (ICNSC), pp. 43-49. doi: 10.1109/ICNSC.2017.8000065
Wu, F., Qian, J., Wu, W. , Ye, Y., Sun, Z., Xu, B., Yang, X., Xu, Y., Zhang, J. & Chen, R. (2017). Boron-doped microporous nano carbon as cathode material for high-performance Li-S batteries. Nano Research, 10(2), pp. 426-436. doi: 10.1007/s12274-016-1303-7
Xu, H., Mughal, S. M., Gowree, E. R. , Atkin, C. J. & Sherwin, S. J. (2017). Destabilisation and modification of Tollmien-Schlichting disturbances by a three-dimensional surface indentation. Journal of Fluid Mechanics, 819, pp. 592-620. doi: 10.1017/jfm.2017.193
Xu, S.J., Ma, Q.W. & Han, D.F. (2017). Experimental study on inertial hydrodynamic behaviors of a complex remotely operated vehicle. European Journal of Mechanics, B/Fluids, 65(Septem), pp. 1-9. doi: 10.1016/j.euromechflu.2017.01.013
Yan, D., Kovacevic, A. ORCID: 0000-0002-8732-2242 & Tang, Q. (2017). Numerical investigation of cavitation in twin-screw pumps. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 232(20), pp. 3733-3750. doi: 10.1177/0954406217740927
Yan, D., Kovacevic, A. & Tang, Q. (2017). Numerical investigation of flow characteristics in twin-screw pump under cavitating conditions. IOP Conference Series: Materials Science and Engineering, 232(1), article number 012026. doi: 10.1088/1757-899x/232/1/012026
Yan, D., Tang, Q., Kovacevic, A. & Pei, L. (2017). Rotor profile design and numerical analysis of 2–3 type multiphase twin-screw pumps. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 232(2), pp. 186-202. doi: 10.1177/0954408917691798
Yan, S. ORCID: 0000-0001-8968-6616 & Ma, Q. ORCID: 0000-0001-5579-6454 (2017). A hybrid approach coupling mlpg-r with QALE-FEM for modelling fully nonlinear water waves. In: Proceedings of the International Offshore and Polar Engineering Conference.
Yang, Hao (2017). Experimental and numerical studies on oil spilling from damaged oil tankers. (Unpublished Doctoral thesis, City, University of London)
Yazdani Nezhad, H. ORCID: 0000-0003-0832-3579, Egan, B., Merwick, F. & McCarthy, C. T. (2017). Bearing damage characteristics of fibre-reinforced countersunk composite bolted joints subjected to quasi-static shear loading. Composite Structures, 166, pp. 184-192. doi: 10.1016/j.compstruct.2017.01.029
Yazdanian, M. & Fu, F. (2017). Parametric study on dynamic behavior of rectangular concrete storage tanks. Coupled Systems Mechanics, 6(2), pp. 189-206. doi: 10.12989/csm.2017.6.2.189
Yilmaz, O., Aouf, N. ORCID: 0000-0001-9291-4077, Majewski, L. , Sanchez-Gestido, M. & Ortega, G. (2017). Using infrared based relative navigation for active debris removal. Paper presented at the 10th International ESA Conference on Guidance, Navigation and Control Systems, 29 May - 02 Jun 2017, Salzburg, Austria.
Yin, D., Wang, D., Li, W. , Li, X., Zhang, H. & Naher, S. (2017). Development of a new 3D model for the prediction of residual stress and fracture behaviour in Ti-6Al-4V after ultrasonic peening treatment. Journal of Materials Processing Technology, 247, pp. 29-39. doi: 10.1016/j.jmatprotec.2017.03.033
Zenati, A., Chakir, M. & Tadjine, M. (2017). Global Stability Analysis of Healthy Situation for a Coupled Model of Healthy and Cancerous Cells Dynamics in Acute Myeloid Leukemia. IFAC papers online, 50(1), pp. 15103-15108. doi: 10.1016/j.ifacol.2017.08.2240
Zhang, K. (2017). Turbulent combustion simulation in realistic gas-turbine combustors. (Unpublished Doctoral thesis, City, University of London)
Zhang, K., Ghobadian, A. & Nouri, J. M. (2017). Comparative study of non-premixed and partially-premixed combustion simulations in a realistic Tay model combustor. Applied Thermal Engineering, 110, pp. 910-920. doi: 10.1016/j.applthermaleng.2016.08.223
Zhang, N., Zheng, X. & Ma, Q. ORCID: 0000-0001-5579-6454 (2017). Updated Smoothed Particle Hydrodynamics for Simulating Bending and Compression Failure Progress of Ice. Water, 9(11), article number 882. doi: 10.3390/w9110882
Zhang, Y., Sun, Z., van Zuijlen, A. & van Bussel, G. (2017). Numerical simulation of transitional flow on a wind turbine airfoil with RANS-based transition model. Journal of Turbulence, 18(9), pp. 879-898. doi: 10.1080/14685248.2017.1334908
Zhang, Z-B., Wu, Y., Jia, M. , Song, H-M., Sun, Z. ORCID: 0000-0002-3862-7939 & Li, Y-H. (2017). Modeling and optimization of the multichannel spark discharge. Chinese Physics B, 26(6), article number 065204. doi: 10.1088/1674-1056/26/6/065204
Zhang, Z., Wu, Y., Jia, M. , Song, H., Sun, Z. ORCID: 0000-0002-3862-7939 & Li, Y. (2017). MHD-RLC discharge model and the efficiency characteristics of plasma synthetic jet actuator. Sensors and Actuators A: Physical, 261, pp. 75-84. doi: 10.1016/j.sna.2017.03.039
Zhang, Z., Wu, Y., Jia, M. , Song, H., Sun, Z., Zong, H. & Li, Y. (2017). The multichannel discharge plasma synthetic jet actuator. Sensors and Actuators A: Physical, 253, pp. 112-117. doi: 10.1016/j.sna.2016.11.011
Zhang, Z., Wu, Y., Sun, Z. , Song, H., Jia, M., Zong, H. & Li, Y. (2017). Experimental research on multichannel discharge circuit and multi-electrode plasma synthetic jet actuator. Journal of Physics D: Applied Physics, 50(16), article number 165205. doi: 10.1088/1361-6463/aa6372
Zhao, J., Cai, G., Cui, L. , Si Larbi, A. & Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 (2017). Deterioration of basic properties of the materials in FRP-strengthening RC structures under ultraviolet exposure. Polymers, 9(9), article number 402. doi: 10.3390/polym9090402
Zheng, X., Ma, Q. & Duan, W.Y. (2017). Comparison of different iterative schemes for ISPH based on Rankine source solution. International Journal of Naval Architecture and Ocean Engineering, 9(4), pp. 390-403. doi: 10.1016/j.ijnaoe.2016.10.007
Zheng, X., Ma, Q., Shao, S. & Khayyer, A. (2017). Modelling of violent water wave propagation and impact by incompressible SPH with first-order consistent kernel interpolation scheme. Water, 9(6), article number 400. doi: 10.3390/w9060400
Zhong, F., Zhou, C., Ma, H. & Zhang, Q. (2017). Heat Transfer of Winglet Tips in a Transonic Turbine Cascade. Journal of Engineering for Gas Turbines and Power, 139(1), article number 012605. doi: 10.1115/1.4034208
Zimos, D.K. (2017). Modelling the Post-Peak Response of Existing Reinforced Concrete Frame Structures Subjected to Seismic Loading. (Unpublished Doctoral thesis, City, University of London)
Zomorodian, M., Belarbi, A. & Ayoub, A. (2017). Finite element model for predicting the shear behavior of FRP-strengthened RC members. Engineering Structures, 153, pp. 239-253. doi: 10.1016/j.engstruct.2017.10.033
2016
Abay, T. Y. & Kyriacou, P. A. (2016). Comparison of NIRS, laser Doppler flowmetry, photoplethysmography, and pulse oximetry during vascular occlusion challenges. Physiological Measurement, 37(4), pp. 503-514. doi: 10.1088/0967-3334/37/4/503
Acarali, D., Rajarajan, M., Komninos, N. & Herwono, I. (2016). Survey of Approaches and Features for the Identification of HTTP-Based Botnet Traffic. Journal of Network and Computer Applications, 76, pp. 1-15. doi: 10.1016/j.jnca.2016.10.007
Adamsky, Florian (2016). Analysis of bandwidth attacks in a bittorrent swarm. (Unpublished Doctoral thesis, City, University of London)
Agrawal, A. & Cabrera-Espana, F. (2016). Hut-like pillar array Si Solar Cells. Solar Energy, 132, pp. 357-362. doi: 10.1016/j.solener.2016.03.026
Alderman, J., Rolston, S., Gaster, M. & Atkin, C.J. (2016). A method of reducing the drag of transport wings. In: 34th AIAA Applied Aerodynamics Conference. 34th AIAA Applied Aerodynamics Conference, 13-17 June 2016, Washington D. C., USA. doi: https://arc.aiaa.org/doi/10.2514/6.2016-3115
Alwis, L., Sun, T. & Grattan, K. T. V. (2016). Developments in optical fibre sensors for industrial applications. Optics and Laser Technology, 78(A), pp. 62-66. doi: 10.1016/j.optlastec.2015.09.004
Aming, A., Uthman, M., Chitaree, R. , Mohammed, W. S. & Rahman, B. M. (2016). Design and Characterization of Porous Core Polarization Maintaining Photonic Crystal Fiber for THz Guidance. Journal of Lightwave Technology, 34(23), pp. 5583-5590. doi: 10.1109/jlt.2016.2623657
Apostolopoulos, C., Halikias, G., Maroukian, K. & Tsaramirsis, G. (2016). Facilitating organisational decision making: a change risk assessment model case study. Journal of Modelling in Management, 11(2), pp. 694-721. doi: 10.1108/jm2-05-2014-0035
Apostolopoulou, D. ORCID: 0000-0002-9012-9910, Anastasopoulos, K. & Bahramirad, S. (2016). Effects of Solar and Wind Generation Integration on Feeder Hosting Capacity. Transmission and Distribution Conference and Exposition (T&D), 2016 IEEE/PES, 2016, article number 7520022. doi: 10.1109/TDC.2016.7520022
Apostolopoulou, D. ORCID: 0000-0002-9012-9910, Dominguez-Garcia, A. D. & Sauer, P. W. (2016). An Assessment of the Impact of Uncertainty on Automatic Generation Control Systems. IEEE Transactions on Power Systems, 31(4), pp. 2657-2665. doi: 10.1109/tpwrs.2015.2475415
Apostolopoulou, D. ORCID: 0000-0002-9012-9910, Sauer, P. W. & Dominguez-Garcia, A. D. (2016). Balancing Authority Area Model and its Application to the Design of Adaptive AGC Systems. IEEE Transactions on Power Systems, 31(5), pp. 3756-3764. doi: 10.1109/tpwrs.2015.2506181
Arunkumar, S. (2016). Preserving Privacy in Mobile Environments. (Unpublished Doctoral thesis, City, University of London)
Asad, M. & Slabaugh, G. G. (2016). Learning Marginalization through Regression for Hand Orientation Inference. 2016 IEEE Conference on Computer Vision and Pattern Recognition Workshops (CVPRW), pp. 1215-1223. doi: 10.1109/CVPRW.2016.154
Asenov, M., Mojsilović, N. & Micic, T. (2016). Reliability of masonry walls subjected to in-plane loading: A slip failure along head joints / Zuverlässigkeit von Mauerwerkswänden bei Belastung in der Ebene: Versagen entlang der Stoßfugenflucht. Mauerwerk, 20(4), pp. 271-283. doi: 10.1002/dama.201600700
Asif, W. (2016). Critical Node Identifcation for accessing network vulnerability, a necessary consideration. (Unpublished Doctoral thesis, City, University of London)
Asif, W., Lestas, M., Khaliq Qureshi, H. & Rajarajan, M. (2016). Optimization based spectral partitioning for node criticality assessment. Journal of Network and Computer Applications, 75, pp. 279-292. doi: 10.1016/j.jnca.2016.09.003
Asif, W., Qureshi, H. K., Rajarajan, M. & Lestas, M. (2016). Combined Banzhaf & Diversity Index (CBDI) for critical node detection. Journal of Network and Computer Applications, 64, pp. 76-88. doi: 10.1016/j.jnca.2015.11.025
Atkin, C. J. & Gowree, E. R. (2016). Staggered Three-dimensional Cavities as a Possible Method for Skin Friction Drag Reduction. In: Proceedings of the 30th International Council of the Aeronautical Sciences. . Bonn, Austria: The International Council of the Aeronautical Sciences.
Axtmann, G., Hegner, F., Brücker, C. & Rist, U. (2016). Investigation and prediction of the bending of single and tandem pillars in a laminar cross flow. Journal of Fluids and Structures, 66, pp. 110-126. doi: 10.1016/j.jfluidstructs.2016.07.017
Axtmann, G., Rist, U., Hegner, F. & Bruecker, C. (2016). Numerical investigation of the bending of slenderwall-mounted cylinders in low reynolds number flow. Notes on Numerical Fluid Mechanics and Multidisciplinary Design, 132, pp. 191-201. doi: 10.1007/978-3-319-27279-5_17
Bai, Y., Shi, S., Fabian, M. , Sun, T., Grattan, K. T. V., McKinnon, B., Gupta, A. & McCague, C. (2016). Potential of Microwave Curing for Precast Concrete Manufacture. Institute of Concrete Technology Yearbook, pp. 61-66.
Baldacchino, D., Manolesos, M. ORCID: 0000-0002-5506-6061, Ferreira, C. , González Salcedo, A., Aparicio, M., Chaviaropoulos, T., Diakakis, K., Florentie, L., García, N. R., Papadakis, G., Sørensen, N. N., Timmer, N., Troldborg, N., Voutsinas, S. G. & van Zuijlen, A. (2016). Experimental benchmark and code validation for airfoils equipped with passive vortex generators. Journal of Physics: Conference Series, 753(2), article number 022002. doi: 10.1088/1742-6596/753/2/022002
Banerjee, J. R. (2016). Modal analysis of sailplane and transport aircraft wings using the dynamic stiffness method. Journal of Physics: Conference Series, 721(1), article number 012005. doi: 10.1088/1742-6596/721/1/012005
Barh, A., Pal, B. P., Agrawal, G. P. , Varshney, R. K. & Rahman, B. M. (2016). Specialty Fibers for Terahertz Generation and Transmission: A Review. IEEE Journal of Selected Topics in Quantum Electronics, 22(2), pp. 365-379. doi: 10.1109/jstqe.2015.2494537
Barh, A., Varshney, R. K., Pal, B. P. , Agrawal, G. P. & Rahman, B. M. (2016). Design of a Polymer-Based Hollow-Core Bandgap Fiber for Low-Loss Terahertz Transmission. IEEE Photonics Technology Letters, 28(15), pp. 1703-1706. doi: 10.1109/lpt.2016.2544198
Bazgir, Ahmad (2016). The behaviour of steel fibre reinforced concrete material and its effect on impact resistance of slabs. (Unpublished Masters thesis, City University London)
Belhaj, A., Phillips, J. P., Kyriacou, P. A. & Langford, R. M. (2016). Comparison of non-invasive peripheral venous saturations with venous blood co-oximetry. Journal of Clinical Monitoring and Computing, 31(6), pp. 1213-1220. doi: 10.1007/s10877-016-9959-9
Bernal, O.D., Seat, H.C., Zabit, U. , Surre, F. & Bosch, T. (2016). Robust Detection of Non-Regular Interferometric Fringes From a Self-Mixing Displacement Sensor Using Bi-Wavelet Transform. IEEE Sensors Journal, 16(22), pp. 7903-7910. doi: 10.1109/jsen.2016.2599702
Bianchi, G., Kovacevic, A., Cipollone, R. , Murgia, S. & Contaldi, G. (2016). Development of a general numerical methodology for CFD analyses in sliding vane machines and application on a mid-size oil injected air compressor. Paper presented at the 23rd International Compressor Engineering Conference, 11-14 Jul 2016, Indiana, USA.
Blasco, J., Chen, T. ORCID: 0000-0001-8037-1685, Tapiador, J. & Peris-Lopez, P. (2016). A Survey of Wearable Biometric Recognition Systems. ACM Computing Surveys, 49(3), pp. 1-35. doi: 10.1145/2968215
Bruecker, C. (2016). Measurement of near-wall 3D flow velocity from wave-guiding micro-pillars. Optics Express, 24(19), pp. 21407-21414. doi: 10.1364/oe.24.021407
Bruecker, C., Kirmse, C. & Triep, M. (2016). Feedback of the Glottal Jet Flow with Supraglottal Wall Oscillations. Acta Acustica united with Acustica, 102(2), pp. 240-243. doi: 10.3813/aaa.918940
Bruecker, C. ORCID: 0000-0001-5834-3020, Wagner, R. & Koehler, M. (2016). Measurements of wall-shear stress fields on the piston crown in an IC engine flow using fluorescent labelled micro-pillar imaging. In: Proceedings of the 18th International Symposium on Applications of Laser and Imaging to Fluid Mechanics. 18th International Symposium on Applications of Laser Techniques to Fluid Mechanics, 4-7 Jul 2016, Lisbon, Portugal.
Brücker, C., Schlegel, D. & Triep, M. (2016). Feather Vibration as a Stimulus for Sensing Incipient Separation in Falcon Diving Flight. Natural Resources, 07(07), pp. 411-422. doi: 10.4236/nr.2016.77036
Buckney, D., Kovacevic, A. & Stosic, N. (2016). Design and evaluation of rotor clearances for oil-injected screw compressors. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 231(1), pp. 26-37. doi: 10.1177/0954408916660342
Budidha, K. (2016). In vivo investigations of photoplethysmograms and arterial oxygen saturation from the auditory canal in conditions of compromised peripheral perfusion. (Unpublished Doctoral thesis, City, University of London)
Camara, A. & Efthymiou, E. (2016). Deck-tower interaction in the transverse seismic response of cable-stayed bridges and optimum con figurations. Engineering Structures, 124, pp. 494-506. doi: 10.1016/j.engstruct.2016.06.017
Cartas Ayala, A., Aghaei, M., Grueter, C. , Ratnieks, F. & Reyes-Aldasoro, C. C. (2016). Behavior Analysis of Ants from Video Sequences. Paper presented at the Visual observation and analysis of Vertebrate And Insect Behavior 2016, 4 Dec 2016, Cancun, Mexico.
Castillo-Rivera, S. & Tomas-Rodriguez, M. (2016). Helicopter nonlinear aerodynamics modelling using VehicleSim. Advances in Engineering Software, 100, pp. 252-265. doi: 10.1016/j.advengsoft.2016.08.001
Chalashkanov, N. M., Dodd, S. J., Dissado, L. A. & Fothergill, J. (2016). The Role of Bulk Charge Transport Processes in Electrical Tree Formation and Breakdown Mechanisms in Epoxy Resins. IEEE Transactions on Dielectrics and Electrical Insulation, 23(6), pp. 3256-3266. doi: 10.1109/tdei.2016.006141
Chatterjee, S., Phillips, J. P. ORCID: 0000-0003-3486-3704 & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2016). Monte Carlo investigation of the effect of blood volume and oxygen saturation on optical path in reflectance pulse oximetry. Biomedical Physics and Engineering Express, 2(6), article number 065018. doi: 10.1088/2057-1976/2/6/065018
Chermak, L., Aouf, N. ORCID: 0000-0001-9291-4077, Richardson, M. & Visentin, G. (2016). Real-time smart and standalone vision/IMU navigation sensor. Journal of Real-Time Image Processing, 16(4), pp. 1189-1205. doi: 10.1007/s11554-016-0613-z
Christou, D., Karcanias, N. & Mitrouli, M. (2016). Approximate least common multiple of several polynomials using the ERES division algorithm. Linear Algebra and Its Applications, 511, pp. 141-175. doi: 10.1016/j.laa.2016.09.010
Chukanova, E. (2016). Modelling of screw compressor plant operation under intermittent conditions. (Unpublished Doctoral thesis, City, University of London)
Chukanova, E., Stosic, N. & Kovacevic, A. ORCID: 0000-0002-8732-2242 (2016). Modelling and Experimental Investigation of Compressor Plant Operation Under Unsteady Conditions. In: ASME 2015 International Mechanical Engineering Congress and Exposition, Volume 4A: Dynamics, Vibration, and Control. ASME 2015 International Mechanical Engineering Congress and Exposition, 13 - 19 November 2015, Houston, Texas, USA.
Corlho, L., Placidi, M., Atkin, C.J. & Sun, Z. (2016). Experimental Investigation of a Handley Page Triple Slotted Aerofoil. Paper presented at the 2016 Applied Aerodynamics Conference: Evolution & Innovation Continues - The Next 150 Years of Concepts, Design and Operations, 19-21 July 2016, Bristol, UK.
Correa, F. & Fring, A. (2016). Regularized degenerate multi-solitons. Journal of High Energy Physics, 2016(9), article number 8. doi: 10.1007/jhep09(2016)008
Crowley, B.J. & Atkin, C.J. (2016). Investigation of the discrete effects of suction in large scale arrays for Laminar flow control. In: 34th AIAA Applied Aerodynamics Conference. . Reston, VA, United States: American Institute of Aeronautics and Astronautics. doi: 10.2514/6.2016-3117
Cvjetkovic, M. & Rakocevic, V. (2016). Alternative Topology Construction for Cooperative Data Distribution in Mobile Ad Hoc Networks. 2016 8th International Congress on Ultra Modern Telecommunications and Control Systems and Workshops (ICUMT), 2016-December, pp. 171-176. doi: 10.1109/icumt.2016.7765352
Davenport, J. J., Hickey, M., Phillips, J. P. & Kyriacou, P. A. (2016). Fiber-optic fluorescence-quenching oxygen partial pressure sensor using platinum octaethylporphyrin. Applied Optics, 55(21), pp. 5603-5609. doi: 10.1364/ao.55.005603
Davenport, J. J., Hickey, M., Phillips, J. P. & Kyriacou, P. A. (2016). Method for producing angled optical fiber tips in the laboratory. Optical Engineering, 55(2), article number 026120. doi: 10.1117/1.oe.55.2.026120
Demetriou, D., Nikitas, N. & Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 (2016). Performance of fixed-parameter control algorithms on high-rise structures equipped with semi-active tuned mass dampers. The Structural Design of Tall and Special Buildings, 25(7), pp. 340-354. doi: 10.1002/tal.1261
Dhand, A. & Pullen, K. R. (2016). Analysis of Dual Mode Continuously Variable Transmission for Flywheel Energy Storage Systems. SAE Technical Papers, article number 2016-01-11. doi: 10.4271/2016-01-1177
Divall, S. & Goodey, R.J. (2016). An apparatus for centrifuge modelling of a shaft construction in clay. Paper presented at the 3rd European Conference on Physical Modelling in Geotechnics Eurofuge 2016, 1-3 Jun 2016, Nantes, France.
Divall, S., Taylor, R. N. & Xu, M. (2016). Centrifuge modelling of tunnelling with forepoling. International Journal of Physical Modelling in Geotechnics, 16(2), pp. 83-95. doi: 10.1680/jphmg.15.00019
Fabian, M., Jia, Y., Shi, S. , McCague, C., Bai, Y., Sun, T. & Grattan, K. T. V. (2016). Optimization of the accelerated curing process of concrete using a fibre Bragg grating-based control system and microwave technology. Proceedings of SPIE, 9916, article number 99160P. doi: 10.1117/12.2236856
Faruki, M. J., Ab Razak, M. Z., Azzuhri, S. R. , Rahman, M. T., Soltanian, M. R. K., Brambilla, G., Rahman, B. M., Grattan, K. T. V., De La Rue, R. M. & Ahmad, H. (2016). Effect of titanium dioxide (TiO₂) nanoparticle coating on the detection performance of microfiber knot resonator sensors for relative humidity measurement. Materials Express, 6(6), pp. 501-508. doi: 10.1166/mex.2016.1342
Favier, J., Revell, A. & Pinelli, A. (2016). Fluid Structure Interaction of Multiple Flapping Filaments Using Lattice Boltzmann and Immersed Boundary Methods. Advances in fluid structure interaction, 133, pp. 167-178. doi: 10.1007/978-3-319-27386-0_10
Fonseca, J., Nadimi, S., Reyes-Aldasoro, C. C. , O’Sullivan, C. & Coop, M. R. (2016). Image-based investigation into the primary fabric of stress transmitting particles in sand. Soils and Foundations, 56(5), pp. 818-834. doi: 10.1016/j.sandf.2016.08.007
Foote, C. A., Castorena-Gonzalez, J. A., Ramirez-Perez, F. I. , Jia, G., Hill, M. A., Reyes-Aldasoro, C. C., Sowers, J. R. & Martinez-Lemus, L. A. (2016). Arterial stiffening in western diet-fed mice is associated with increased vascular elastin, transforming growth factor-ß, and plasma neuraminidase. Frontiers in Physiology, 7(JUL), article number 285. doi: 10.3389/fphys.2016.00285
Fu, F. (2016). 3D finite element analysis of the whole-building behavior of tall building in fire. Advances in Computational Design, 1(4), pp. 329-344. doi: 10.12989/acd.2016.1.4.329
Fumarola, I., Gaster, M. & Atkin, C.J. (2016). Experimental investigation of the vorticity amplification on a swept wing with a blunt leading edge. Paper presented at the 52nd 3AF International Conference on Applied Aerodynamics, 27-29 Mar 2017, Lyon, France.
Gabdullin, N & Khan, S. (2016). Study of Non-Homogeneity of Magnetic Field Distribution in Single-Crystal Ni-Mn-Ga Magnetic Shape Memory Element in Actuators due to its Anisotropic Twinned Microstructure. IEEE Transactions on Magnetics, 53(3), article number 4900108. doi: 10.1109/tmag.2016.2640201
Gabdullin, N. (2016). Modelling and design of high-speed, long-lifetime and large-force electromagnetic actuators based on magnetic shape memory alloys. (Unpublished Doctoral thesis, City, University of London)
Gabdullin, N. & Khan, S. (2016). Electromagnetic and thermal analyses of high performance magnetic shape memory actuators for valve applications. IEEE Transactions on Magnetics, 52(9), pp. 1-6. doi: 10.1109/tmag.2016.2563406
Gabdullin, N. & Khan, S. (2016). Simulation-based Design Methodology for Magnetic Shape Memory Actuators. Paper presented at the 5th International Conference on Ferromagnetic Shape Memory Alloys (ICFSMA 2016), 5-9 Sep 2016, Sendai, Japan.
Gami, A. (2016). Experimental and computational analysis for insect inspired flapping wing micro air vehicles. (Unpublished Doctoral thesis, City, University of London)
Ghosh, S. & Rahman, B. M. (2016). An Innovative Straight Resonator Incorporating a Vertical Slot as an Efficient Bio-Chemical Sensor. IEEE Journal on Selected Topics in Quantum Electronics, 23(2), pp. 132-139. doi: 10.1109/jstqe.2016.2630299
Giaralis, A. ORCID: 0000-0002-2952-1171 & Marian, L. (2016). Use of inerter devices for weight reduction of tuned mass-dampers for seismic protection of multi-storey buildings: the tuned mass-damper-interter (TMDI). Proceedings Volume 9799, Active and Passive Smart Structures and Integrated Systems 2016, 9799, doi: 10.1117/12.2219324
Giaralis, A. ORCID: 0000-0002-2952-1171 & Taflanidis, A. A. (2016). Robust reliability-based design of seismically excited tuned mass-damper-inerter (TMDI) equipped MDOF structures with uncertain properties. Paper presented at the 6th European Conference on Structural Control - EACS2016, 11-13 Jul 2016, Sheffield, England.
Gkatzogias, K.I. & Kappos, A. J. (2016). Semi-Active Control Systems in Bridge Engineering: A Review of the Current State of Practice. Structural Engineering International, 26(4), pp. 290-300. doi: 10.2749/101686616x14555429844040
Gkoktsi, K. & Giaralis, A. ORCID: 0000-0002-2952-1171 (2016). Assessment of sub-Nyquist deterministic and random data sampling techniques for operational modal analysis. In: 8th European Workshop on Structural Health Monitoring (EWSHM 2016). 8th European Workshop On Structural Health Monitoring (EWSHM 2016), 5-8 Jul 2016, Bilbao, Spain.
Gkoktsi, K., Giaralis, A. & TauSiesakul, B. (2016). Sub-Nyquist signal-reconstruction-free operational modal analysis and damage detection in the presence of noise. Paper presented at the SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 20-24 Mar 2016, Las Vegas, USA.
Goodey, R.J., McNamara, A. M. & Panchal, J. P. (2016). Bearing Capacity of Sheet Piled Foundations. Paper presented at the 2nd Asian Conference on Physical Modelling in Geotechnics, 30 Nov-02 Dec 2016, Shanhai, China.
Gowree, E. R. & Atkin, C. J. (2016). On the excitation of Tollmien-Schlichting waves due to surface vibration. Paper presented at the 52nd 3AF International Conference on Applied Aerodynamics, 27-29 Mar 2017, Lyon, France.
Green, R., Simoes, F. A., Reyes-Aldasoro, C. C. , Rossor, A. M., Scoto, M., Barri, M., Greensmith, L., Muntoni, F., Reilly, M. M. & Hafezparast, M. (2016). A DYNC1H1 mutation in autosomal dominant spinal muscular atrophy shows the potential of pharmacological inhibition of histone deacetylase 6 as a treatment for disease associated cellular phenotypes. Journal Of The Peripheral Nervous System, 21(3), pp. 229-314. doi: 10.1111/jns.12181
Grekavicius, L., Hughes, J. A., Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 & Efthymiou, E. (2016). Novel morphologies of aluminium cross-sections through structural topology optimization techniques. Key Engineering Materials, 710, pp. 321-326. doi: 10.4028/www.scientific.net/KEM.710.321
Guzmán-Iñigo, J. ORCID: 0000-0002-1833-6034, Sipp, D. & Schmid, P. J. (2016). Recovery of the inherent dynamics of noise-driven amplifier flows. Journal of Fluid Mechanics, 797, pp. 130-145. doi: 10.1017/jfm.2016.266
Hada, S. L. & Rahman, B. M. (2016). Rigorous analysis of numerical methods: a comparative study. Optical and Quantum Electronics, 48(6), article number 309. doi: 10.1007/s11082-016-0579-x
Hamadi, D., Ayoub, A. & Abdelhafid, O. (2016). A new flat shell finite element for the linear analysis of thin shell structures. European Journal of Computational Mechanics, 24(6), pp. 232-255. doi: 10.1080/17797179.2016.1153401
Hamadi, D., Ayoub, A. & Maalem, T. (2016). A new strain-based finite element for plane elasticity problems. Engineering Computations, 33(2), pp. 562-579. doi: 10.1108/ec-09-2014-0181
Henkin, R., Dykes, J. & Slingsby, A. (2016). Characterizing Representation of Temporal Data Visualization. Poster presented at the VIS 2016, 23-28 Oct 2016, Baltimore, USA.
Hickey, M., Phillips, J. P. & Kyriacou, P. A. (2016). Investigation of peripheral photoplethysmographic morphology changes induced during a hand-elevation study. Journal of Clinical Monitoring and Computing, 30(5), pp. 727-736. doi: 10.1007/s10877-015-9761-0
Ison, S. & Kaparias, I. (2016). Universities' Transport Study Group UK Annual Conference 2015. Transportation Planning and Technology, 39(1), pp. 1-2. doi: 10.1080/03081060.2015.1113664
Javdani, S., Fabian, M., Carlton, J. , Sun, T. & Grattan, K. T. V. (2016). Underwater free-vibration analysis of full-scale marine propeller using a Fibre Bragg Grating-based sensor system. IEEE Sensors Journal, 16(4), pp. 946-953. doi: 10.1109/jsen.2015.2490478
Jiang, W., Kohli, N., Sun, X. & Rahman, B. M. (2016). Multi-Poly-Silicon-Layer-Based Spot-Size Converter for Efficient Coupling Between Silicon Waveguide and Standard Single-Mode Fiber. IEEE Photonics Journal, 8(3), pp. 1-12. doi: 10.1109/jphot.2016.2577594
Kabir, I. R., Yin, D. & Naher, S. (2016). Two dimensional finite element thermal model of laser surface glazing for H13 tool steel. AIP Conference Proceedings, 1769(1), article number 110003. doi: 10.1063/1.4963512
Kappos, A. J. (2016). An overview of the development of the hybrid method for seismic vulnerability assessment of buildings. Structure and Infrastructure Engineering, 12(12), pp. 1573-1584. doi: 10.1080/15732479.2016.1151448
Kappos, A. J. & Papanikolaou, V.K. (2016). Nonlinear dynamic analysis of masonry buildings and definition of seismic damage states. Open Construction and Building Technology Journal, 10(1), pp. 192-209. doi: 10.2174/1874836801610010192
Karathanassis, I. K., Koukouvinis, P. & Gavaises, M. (2016). Topology and distinct features of flashing flow in an injector nozzle. Atomization and Sprays, 26(12), pp. 1307-1336. doi: 10.1615/atomizspr.2016016510
Karcanias, N. & Leventides, J. (2016). Solution of the determinantal assignment problem using the Grassmann matrices. International Journal of Control, 89(2), pp. 352-367. doi: 10.1080/00207179.2015.1077525
Karcanias, N., Leventides, J., Milonidis, E. & Meintanis, I. (2016). Selection of Decentralised Control Structures: Structural Methodologies and Diagnostics. IFAC PapersOnLine, 49(9), pp. 80-85. doi: 10.1016/j.ifacol.2016.07.498
Karcanias, N., Meintanis, I. & Leventides, J. (2016). Selection of Decentralised Schemes and Parametrisation of the Decentralised Degenerate Compensators. IFAC PaperOnLine, 49(9), pp. 74-79. doi: 10.1016/j.ifacol.2016.07.497
Karcanias, N., Meintanis, I. & Leventides, J. (2016). System Degeneracy and the Output Feedback Problem: Parametrisation of the Family of Degenerate Compensators. IFAC PapersOnLine, 49(9), pp. 68-73. doi: 10.1016/j.ifacol.2016.07.496
Karim, M. R. & Rahman, B. M. (2016). Ultra-broadband mid-infrared supercontinuum generation using chalcogenide rib waveguide. Optical and Quantum Electronics, 48(3), pp. 1-10. doi: 10.1007/s11082-016-0458-5
Kassem, H. I., Liu, X. & Banerjee, J. R. (2016). Transonic flutter analysis using a fully coupled density based solver for inviscid flow. Advances in Engineering Software, 95, pp. 1-6. doi: 10.1016/j.advengsoft.2016.01.012
Kather, N. J., Weis, C. A., Zöllner, F. G. & Reyes-Aldasoro, C. C. (2016). Mapping tumour tissue: quantitative maps of histological whole slide images. Oncology News, 10(6), pp. 188-190.
Kechagias-Stamatis, O., Aouf, N. ORCID: 0000-0001-9291-4077 & Richardson, M. (2016). 3D Automatic Target Recognition for Future LIDAR Missiles. IEEE Transactions on Aerospace and Electronic Systems, 52(6), pp. 2662-2675. doi: 10.1109/taes.2016.150300
Kitade, S. & Pullen, K. R. (2016). Flywheel. In: Hashmi, S. (Ed.), Reference Module in Materials Science and Materials Engineering. . Elsevier. doi: 10.1016/B978-0-12-803581-8.03974-6
Koukouvinis, P., Gavaises, M., Georgoulas, A. & Marengo, M. (2016). Compressible simulations of bubble dynamics with central-upwind schemes. International Journal of Computational Fluid Dynamics, 30(2), pp. 129-140. doi: 10.1080/10618562.2016.1166216
Koukouvinis, P., Gavaises, M., Li, J. & Wang, L. (2016). Large Eddy Simulation of Diesel injector including cavitation effects and correlation to erosion damage. Fuel, 175, pp. 26-39. doi: 10.1016/j.fuel.2016.02.037
Koukouvinis, P., Gavaises, M., Supponen, O. & Farhat, M. (2016). Numerical simulation of a collapsing bubble subject to gravity. Physics of Fluids, 28(3), 032110-1-032110-15. doi: 10.1063/1.4944561
Koukouvinis, P., Gavaises, M., Supponen, O. & Farhat, M. (2016). Simulation of bubble expansion and collapse in the vicinity of a free surface. Physics of Fluids, 28(5), article number 052103. doi: 10.1063/1.4949354
Kovacevic, A. & Stosic, N. (2016). CFD Analysis of Oil Flooded Twin Screw Compressors. Paper presented at the 23rd International Compressor Engineering Conference, 11-14 Jul 2016, Indiana, USA.
Le, B. T., Nadimi, S., Goodey, R.J. & Taylor, R.N. (2016). System to measure three-dimensional movements in physical models. Géotechnique Letters, 6(4), pp. 256-262. doi: 10.1680/jgele.16.00073
Le, B. T. & Taylor, R.N. (2016). A study on the reinforcing capabilities of Forepoling Umbrella System in urban tunnelling. Paper presented at the The 3rd European Conference on Physical Modelling in Geotechnics, 1-3 Jun 2016, Nantes, France.
Lee, J., Park, C. H., Oh, C. S. , Han, K. & Kim, T. H. (2016). Coronary Computed Tomographic Angiography at 80 kVp and Knowledge-Based Iterative Model Reconstruction Is Non-Inferior to that at 100 kVp with Iterative Reconstruction. PLoS ONE, 11(9), article number e0163410. doi: 10.1371/journal.pone.0163410
Leventides, J. & Karcanias, N. (2016). Approximate decomposability in and the canonical decomposition of 3-vectors. Linear and Multilinear Algebra, 64(12), pp. 2378-2405. doi: 10.1080/03081087.2016.1158230
Leventides, J., Livada, M. & Karcanias, N. (2016). Zero Assignment Problem in RLC Networks. IFAC PapersOnLine, 49(9), pp. 92-98. doi: 10.1016/j.ifacol.2016.07.502
Liu, J., Khan, U., Coleman, J. , Fernandez, B., Rodriguez, P., Naher, S. & Brabazon, B. (2016). Graphene Oxide and Graphene Nanosheet Reinforced Aluminium Matrix Composites: powder synthesis and prepared composite characteristics. Materials & Design, 94, pp. 87-94. doi: 10.1016/j.matdes.2016.01.031
Liu, X. & Banerjee, J. R. (2016). Free vibration analysis for plates with arbitrary boundary conditions using a novel spectral-dynamic stiffness method. Computers and Structures, 164, pp. 108-126. doi: 10.1016/j.compstruc.2015.11.005
Liu, X., Kassem, H. I. & Banerjee, J. R. (2016). An exact spectral dynamic stiffness theory for composite plate-like structures with arbitrary non-uniform elastic supports, mass attachments and coupling constraints. Composite Structures, 142, pp. 140-154. doi: 10.1016/j.compstruct.2016.01.074
Lockett, R. D., Fatmi, Z., Kuti, O. & Price, R. (2016). An Optical Characterization of the Effect of High-Pressure Hydrodynamic Cavitation on Diesel. SAE Technical Papers, 2016-0, article number 2016-01-0841. doi: 10.4271/2016-01-0841
Lockett, R. D., Jeshani, M., Makri, K. & Price, R. (2016). An Optical Characterization of Atomization in Non-Evaporating Diesel Sprays. SAE Technical Papers, 2016-0, article number 2016-01-0865. doi: 10.4271/2016-01-0865
Lu, J., Yang, Z., Wu, H. , Wu, W., Liu, F., Xu, S., Yang, H. & Yan, S. (2016). Model experiment on the dynamic process of oil leakage from the double hull tanker. Journal of Loss Prevention in the Process Industries, 43, pp. 174-180. doi: 10.1016/j.jlp.2016.05.013
Lun, Y. H., Carlton, J. & Bichou, K. (2016). Examining the economic impact of transport complex economies. Journal of Shipping and Trade, 1(1), article number 1. doi: 10.1186/s41072-016-0005-3
Ma, H., Wang, Z., Wang, L. , Zhang, Q., Yang, Z. & Bao, Y. (2016). Ramp heating in high-speed transient thermal measurement with reduced uncertainty. Journal of Propulsion and Power, 32(5), pp. 1190-1198. doi: 10.2514/1.b35803
Ma, Q., Zhou, Y. & Yan, S. (2016). A review on approaches to solving Poisson’s equation in projection-based meshless methods for modelling strongly nonlinear water waves. Journal of Ocean Engineering and Marine Energy, 2(3), pp. 279-299. doi: 10.1007/s40722-016-0063-5
Maisel, M. E., Stephenson, K. G., South, M. , Rodgers, J., Freeston, M. H. & Gaigg, S. B. (2016). Modeling the Cognitive Mechanisms Linking Autism Symptoms and Anxiety in Adults. Journal of Abnormal Psychology, 125(5), pp. 692-703. doi: 10.1037/abn0000168
Makri, K., Lockett, R. D., Jeshani, M. & Price, R. (2016). The effect of cavitation on atomization in non-evaporating diesel sprays. Paper presented at the ILASS – Europe 2016, 27th Annual Conference on Liquid Atomization and Spray Systems, 4-7 Sep 2016, Brighton, UK. doi: 10.13140/RG.2.1.1085.1444/1
Malgarinos, I., Nikolopoulos, N. & Gavaises, M. (2016). A numerical study on droplet-particle collision dynamics. International Journal of Heat and Fluid Flow, 61, pp. 499-509. doi: 10.1016/j.ijheatfluidflow.2016.06.010
Mamouei, M. H., Kaparias, I. & Halikias, G. (2016). A quantitative approach to behavioural analysis of drivers in highways using particle filtering. Transportation Planning and Technology, 39(1), pp. 78-96. doi: 10.1080/03081060.2015.1108084
Manchanda, M. & Sikora, I. (2016). Mismanaged Go-Arounds And The Need To Mitigate Their Occurrence. In: Proceedings of the Third International Conference on Traffic and Transport Engineering. (pp. 44-48). Belgrade, Serbia: IJTTE.
Manolesos, M. ORCID: 0000-0002-5506-6061, Sørensen, N. N., Troldborg, N. , Florentie, L., Papadakis, G. & Voutsinas, S. (2016). Computing the flow past Vortex Generators: Comparison between RANS Simulations and Experiments. Journal of Physics: Conference Series, 753(2), article number 022014. doi: 10.1088/1742-6596/753/2/022014
Manolesos, M. ORCID: 0000-0002-5506-6061 & Voutsinas, S. G. (2016). Experimental study of drag-reduction devices on a flatback airfoil. AIAA Journal, 54(11), pp. 3382-3396. doi: 10.2514/1.j054901
Martinez Estelles, Sylvia (2016). Study and suppression of vibrations in rotary-wing Unmanned Aerial Vehicles. (Unpublished Doctoral thesis, City, University of London)
McNamara, A. M. & Gorasia, Rohit J. (2016). High-capacity ribbed pile foundations. Proceedings of the Institution of Civil Engineers: Geotechnical Engineering, 169(3), pp. 264-275. doi: 10.1680/jgeen.15.00073
Mergos, P.E. (2016). Optimum design of reinforced concrete frames according to EC8 and MC2010 with Genetic Algorithms. In: Proceedings of the 7th European Congress on Computational Methods in Applied Sciences and Engineering, ECCOMAS 2016. (pp. 3505-3518). Greece: Institute of Structural Analysis and Antiseismic Research, National Technical University of Athens (NTUA).
Mergos, P.E. (2016). Optimum seismic design of reinforced concrete frames according to Eurocode 8 and fib Model Code 2010. Earthquake Engineering and Structural Dynamics, 46(7), pp. 1181-1201. doi: 10.1002/eqe.2851
Micic, T. (2016). Risk reality vs risk perception. Journal of Risk Research, 19(10), pp. 1261-1274. doi: 10.1080/13669877.2015.1121900
Micic, T., Stojic, D., Stankovic, M. & Velimirovic, N. (2016). Gamma process model for timber-concrete composite beam deterioration prediction. Wood Research, 61(3), pp. 373-384.
Mishra, J. K., Priye, V. & Rahman, B. M. (2016). Augmenting data rate performance for higher order modulation in triangular index profile multicore fiber interconnect. Optics Communications, 371, pp. 40-46. doi: 10.1016/j.optcom.2016.03.038
Mishra, J. K., Rahman, B. M. & Priye, V. (2016). Rectangular Array Multicore Fiber Realizing Low Crosstalk Suitable for Next-Generation Short-Reach Optical Interconnects With Low Misalignment Loss. IEEE Photonics Journal, 8(4), pp. 1-14. doi: 10.1109/jphot.2016.2591002
Mitroglou, N., Lorenzi, M., Santini, M. & Gavaises, M. (2016). Application of X-ray micro-computed tomography on high-speed cavitating diesel fuel flows. Experiments in Fluids, 57(11), article number 175. doi: 10.1007/s00348-016-2256-z
Mohseni, E. & Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 (2016). Effect of nano-alumina on pore structure and durability of class F fly ash self-compacting mortar. American Journal of Engineering and Applied Sciences, 9(2), pp. 323-333. doi: 10.3844/ajeassp.2016.323.333
Moslehy, Y., Labib, M., Ayoub, A. & Mullapudi, R. (2016). Influence of Fiber-Reinforced Polymer Sheets on the Constitutive Relationships of Reinforced Concrete Elements. Journal of Composites for Construction, 20(2), article number 04015058. doi: 10.1061/(asce)cc.1943-5614.0000616
Mujic, E., Stosic, N., Kovacevic, A. & Smith, I. K. (2016). Noise Control by Suppression of Gas Pulsation in Screw Compressors. In: Ahmed, N. (Ed.), Advances in Noise Analysis, Mitigation and Control. . InTech. doi: 10.5772/64795
Nadimi, S., Divall, S., Fonseca, J. , Goodey, R.J. & Taylor, R.N. (2016). An addendum for particle image velocimetry in centrifuge modelling. Paper presented at the The 3rd European Conference on Physical Modelling in Geotechnics, 1-3 Jun 2016, Nantes, France.
Nadimi, S. & Fonseca, J. (2016). Enhancing soil sample preparation by thermal cycling. Géotechnique, 66(11), pp. 953-958. doi: 10.1680/jgeot.15.t.033
Nadimi, S., Fonseca, J., Barreto, D. & Taylor, R.N. (2016). A new approach to investigate the particle size effects in centrifuge modelling. Paper presented at the The 3rd European Conference on Physical Modelling in Geotechnics, 1-3 Jun 2016, Nantes, France.
Nguyen, T.H., Sun, T. & Grattan, K. T. V. (2016). Surface plasmon resonance based fibre-optic chemical sensor for the detection of cocaine. Proceedings of SPIE, 9916, article number 991612. doi: 10.1117/12.2236938
Nguyen, T.H. ORCID: 0000-0003-2250-3832, Wren, S., Sun, T. ORCID: 0000-0003-3861-8933 & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2016). Fluorescent optical fibre chemosensor for the detection of mercury. Proceedings of SPIE 10013, SPIE BioPhotonics Australasia, 10013, article number 100131U. doi: 10.1117/12.2243054
Nikolić, B., Khan, S.H. & Gabdullin, N. (2016). Development of non-conventional instrument transformers (NCIT) using smart materials. Journal of Physics: Conference Series, 772(1), article number 012065. doi: 10.1088/1742-6596/772/1/012065
Njoum, H. & Kyriacou, P. A. (2016). Photoplethysmography for an independent measure of pulsatile pressure under controlled flow conditions. Physiological Measurement, 38(2), pp. 87-100. doi: 10.1088/1361-6579/38/2/87
Njoum, H. & Kyriacou, P. A. (2016). Photoplethysmography: Towards a non-invasive pressure measurement technique. In: IEEE. 2016 IEEE 38th Annual International Conference of the Engineering in Medicine and Biology Society (EMBC), 16-22 Aug 2016, Orlando, USA. doi: 10.1109/EMBC.2016.7590776
Pan, C. & Rahman, B. M. (2016). Accurate Analysis of the Mode (de)multiplexer Using Asymmetric Directional Coupler. Journal of Lightwave Technology, 34(9), pp. 2288-2296. doi: 10.1109/jlt.2016.2530852
Pan, C. & Rahman, B. M. (2016). Compact Polarization-Independent MMI-Based 1 x 2 Power Splitter Using Metal-Cap Silicon-on-Insulator Waveguide. IEEE Photonics Journal, 8(3), pp. 1-14. doi: 10.1109/jphot.2016.2564926
Pan, C. & Rahman, B. M. (2016). High-Sensitivity Polarization-Independent Biochemical Sensor Based on Silicon-on-Insulator Cross-Slot Waveguide. IEEE Journal of Selected Topics in Quantum Electronics, 23(2), pp. 64-71. doi: 10.1109/jstqe.2016.2594094
Panagopoulos, I., Atkin, C.J. & Sikora, I. (2016). Lean Six-Sigma in Aviation Safety: An implementation guide for measuring aviation system’s safety performance. Journal of Safety Studies, 2(2), doi: 10.5296/jss.v2i2.10438
Papadopoulos, Konstantinos, Gavaises, M., Pantos, I. , Katritsis, D. G. & Mitroglou, N. (2016). Derivation of flow related risk indices for stenosed left anterior descending coronary arteries with the use of computer simulations. Medical Engineering & Physics, 38(9), pp. 929-939. doi: 10.1016/j.medengphy.2016.05.016
Pennington, K. A., Ramirez-Perez, F. I., Pollock, K. E. , Talton, O. O., Foote, C. A., Reyes-Aldasoro, C. C., Wu, H-H., Ji, T., Martinez-Lemus, L. A. & Schulz, L. C. (2016). Maternal hyperleptinemia is associated with male offspring’s altered vascular function and structure in mice. PLOS One, 11(5), article number e0155377. doi: 10.1371/journal.pone.0155377
Petrini, F. & Giaralis, A. ORCID: 0000-0002-2952-1171 (2016). Control of across-wind vortex shedding induced vibrations in tall buildings using the tuned mass-damper-inerter (TMDI). Paper presented at the 6th European Conference on Structural Control - EACS2016, 11-13 Jul 2016, Sheffield, England.
Pinelli, A., Omidyeganeh, M., Brücker, C. , Revell, A., Sarkar, A. & Alinovi, E. (2016). The PELskin project: part IV—control of bluff body wakes using hairy filaments. Meccanica, 52(7), pp. 1503-1514. doi: 10.1007/s11012-016-0513-0
Placidi, M. & Ganapathisubramani, B. (2016). On the effects of surface morphology on the structure of wall-turbulence. Springer Proceedings in Physics, 165, pp. 149-154. doi: 10.1007/978-3-319-29130-7_27
Placidi, M., van Bokhorst, E. & Atkin, C. J. (2016). On the effect of discrete roughness on the growth of crossflow instability in very low turbulence environment. In: 8th AIAA Flow Control Conference. . Reston, VA, United States: American Institute of Aeronautics and Astronautics. doi: 10.2514/6.2016-3470
Ponitz, B., Sastuba, M. & Bruecker, C. (2016). 4D visualization study of a vortex ring life cycle using modal analyses. Journal of Visualization, 19(2), pp. 237-259. doi: 10.1007/s12650-015-0314-x
Pullen, K. R. ORCID: 0000-0001-8501-9226, Read, M. G. ORCID: 0000-0002-7753-2457, Sellick, R. , Fenocchi, A. & Etemad, S. (2016). Efficiency Benefits from the Deployment of a Novel Flywheel Solution for Non-Electrified Lines. International Journal of Railway Technology, 5(4), pp. 79-100. doi: 10.4203/ijrt.5.4.4
Qassem, M., Hickey, M. & Kyriacou, P. A. (2016). Colorimetric determinations of lithium levels in drop-volumes of human plasma for monitoring patients with bipolar mood disorder. Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS, 2016, doi: 10.1109/EMBC.2016.7591889
Qian, W., Rosic, B., Zhang, Q. & Khanal, B. (2016). Influence of fluid temperature gradient on the flow within the shaft gap of a PLR pump. Heat and Mass Transfer/Waerme- und Stoffuebertragung, 52(3), pp. 469-481. doi: 10.1007/s00231-015-1570-y
Quinn, A. & Sikora, I. (2016). The right stuff ‘v’ the right (safe) thing. Paper presented at the 8th International Space Safety Conference, 18-20 May 2016, Florida, USA.
Raghuwanshi, S.K. & Rahman, B. M. (2016). Modeling of single mode optical fiber having a complicated refractive index profile by using modified scalar finite element method. Optical and Quantum Electronics, 48(7), article number 360. doi: 10.1007/s11082-016-0632-9
Rahman, Mohammed Moseeur (2016). Full-vectorial study of light and sound interactions in low and high index contrast silica waveguides. (Unpublished Doctoral thesis, City University London)
Rahulamathavan, Y., Rajarajan, M. & Phan, R. C. W. (2016). Smart, secure and seamless access control scheme for mobile devices. 2016 IEEE International Conference on Communications, ICC 2016, 3494, pp. 1-6. doi: 10.1109/icc.2016.7510837
Rahulamathavan, Y., Veluru, S., Han, J. , Li, F., Rajarajan, M. & Lu, R. (2016). User Collusion Avoidance Scheme for Privacy-Preserving Decentralized Key-Policy Attribute-Based Encryption. IEEE Transactions on Computers, 65(9), pp. 2939-2946. doi: 10.1109/tc.2015.2510646
Rajarajan, M., Zaidi, K., Nallanathan, A, , Rakocevic, V. & Milojevic, M, (2016). Host Based Intrusion Detection for VANETs: A statistical approach to Rogue Node Detection. IEEE Transactions on Vehicular Technology, 65(8), pp. 6703-6714. doi: 10.1109/tvt.2015.2480244
Ramirez-Perez, F. I., Pennington, K. A., Pollock, K. E. , Esangbedo, O., Foote, C. A., Reyes-Aldasoro, C. C., Wu, H-H., Ji, T., Martinez-Lemus, L. A. & Schulz, L. C. (2016). Maternal Hyperleptinemia Increases Arterial Stiffening and Alters Vasodilatoy Responses to Insulin in Adult Male Mice Offspring. The FASEB Journal, 30(S1), article number 721.8. doi: 10.1096/fasebj.30.1_supplement.721.8
Read, M. G., Smith, I. K. & Stosic, N. (2016). Fundamental Investigation Of Whole-Life Power Plant Performance For Enhanced Geothermal Systems. In: 23rd International Compressor Engineering Conference at Purdue 2016. . Red Hook, NY: Curran Associates, Inc.
Read, M. G., Smith, I. K., Stosic, N. & Kovacevic, A. (2016). Comparison of organic rankine cycle systems under varying conditions using turbine and twin-screw expanders. Energies, 9(8), article number 614. doi: 10.3390/en9080614
Revell, A., O Connor, J., Sarkar, A. , Li, C., Favier, J., Kamps, L. & Brücker, C. (2016). The PELskin project: part II—investigating the physical coupling between flexible filaments in an oscillating flow. Meccanica, 52(8), pp. 1781-1795. doi: 10.1007/s11012-016-0525-9
Rosti, M. E., Kamps, L., Bruecker, C. , Omidyeganeh, M. & Pinelli, A. (2016). The PELskin project-part V: towards the control of the flow around aerofoils at high angle of attack using a self-activated deployable flap. Meccanica, 52(8), pp. 1811-1824. doi: 10.1007/s11012-016-0524-x
Rosti, M. E., Omidyeganeh, M. & Pinelli, A. (2016). Direct numerical simulation of the flow around an aerofoil in ramp-up motion. Physics of Fluids, 28(2), pp. 1-17. doi: 10.1063/1.4941529
Rosti, Marco (2016). Direct numerical simulation of an aerofoil at high angle of attack and its control. (Submitted Doctoral thesis, City, University of London)
Salvi, J. & Giaralis, A. (2016). Concept study of a novel energy harvesting-enabled tuned mass-damper-inerter (EH-TMDI) device for vibration control of harmonically-excited structures. Journal of Physics: Conference Series, 744(1), article number 012082. doi: 10.1088/1742-6596/744/1/012082
Sayma, A. I. ORCID: 0000-0003-2315-0004 & Al Zaili, J. ORCID: 0000-0003-4072-2107 (2016). Challenges in the Development of Micro Gas Turbines for Concentrated Solar Power Systems. Paper presented at the 8th International Gas Turbine Conference – The Future of Gas Turbine Technology, 12-13 Oct 2016, Brussels, Belgium.
Sayyad, Ali (2016). Optimisation of condition number for eigenstructure problems. (Unpublished Doctoral thesis, City, University of London)
Shmaliy, Y. S., Khan, S. & Zhao, S. (2016). Ultimate iterative UFIR filtering algorithm. Measurement, 92, pp. 236-242. doi: 10.1016/j.measurement.2016.06.029
Shmaliy, Y. S., Liu, F., Zhao, S. & Khan, S. (2016). Unbiased, optimal, and in-betweens: the trade-off in discrete finite impulse response filtering. IET Signal Processing, 10(4), pp. 325-334. doi: 10.1049/iet-spr.2015.0360
Short, J. & Sikora, I. (2016). Hazard Identification In Part-145 Approved Maintenance Organisations: The Management Of Risk Attitude. In: International Scientific Conference on Science and Transport Development (ZIRP 2016): Perspectives on Croatian 3PL Industry in Acquiring International Cargo Flows. (pp. 181-191). Zagreb, Croatia: Fakultet prometnih znanosti (University of Zagreb).
Siaudinyte, L. & Grattan, K. T. V. (2016). Uncertainty evaluation of trigonometric method for vertical angle calibration of the total station instrument. Measurement, 86, pp. 276-282. doi: 10.1016/j.measurement.2015.10.037
Siaudinyte, L., Kilikevicius, A., Sabaitis, D. & Grattan, K. T. V. (2016). Modal analysis and experimental research into improved centering-leveling devices. Measurement, 88, pp. 9-17. doi: 10.1016/j.measurement.2016.01.044
Sikora, I., Patriarca, R., Di Gravio, G. & Constantino, F. (2016). MARS – A Fresh Look at Risk Assessment Modelling and Effective Safety Data Communication. In: International Scientific Conference on Science and Transport Development (ZIRP 2016): Perspectives on Croatian 3PL Industry in Acquiring International Cargo Flows. (pp. 193-209). Zagreb, Croatia: Fakultet prometnih znanosti (University of Zagreb).
Sklia, D., Kyriacou, P. A. & Petros, A. J. (2016). Determining the optimal site for imaging the microcirculation in neonates using sidestream dark – field imaging. IFMBE Proceedings, 57, pp. 378-381. doi: 10.1007/978-3-319-32703-7_74
Soltanian, M. R. K., Sharbirin, A. S., Ariannejad, M. M. , Amiri, I. S., De La Rue, R. M., Brambilla, G., Rahman, B. M., Grattan, K. T. V. & Ahmad, H. (2016). Variable Waist-Diameter Mach-Zehnder Tapered-Fiber Interferometer as Humidity and Temperature Sensor. IEEE Sensors Journal, 16(15), pp. 5987-5992. doi: 10.1109/jsen.2016.2573961
Somani, G., Gaur, M. S., Sanghi, D. , Conti, M. & Rajarajan, M. (2016). DDoS victim service containment to minimize the internal collateral damages in cloud computing. Computers and Electrical Engineering, 59, pp. 165-179. doi: 10.1016/j.compeleceng.2016.12.004
Soudi, S. & Rahman, B. M. (2016). Design of a Compact Polarization Splitter by Using Identical Coupled Silicon Nanowires. Journal of Lightwave Technology, 34(17), pp. 4169-4178. doi: 10.1109/jlt.2016.2577341
Stansby, P.K. & Ma, Q. (2016). Foreword to special issue on particle methods for flow modeling in ocean engineering. Journal of Ocean Engineering and Marine Energy, 2(3), pp. 249-250. doi: 10.1007/s40722-016-0065-3
Stosic, N., Rane, S., Kovacevic, A. ORCID: 0000-0002-8732-2242 & Smith, I. K. ORCID: 0000-0003-1524-9880 (2016). Screw Rotor Profiles of Variable Lead Vacuum and Multiphase Machines and Their Calculation Models. In: ASME 2016 International Mechanical Engineering Congress and Exposition, Volume 6A: Energy. ASME 2016 International Mechanical Engineering Congress and Exposition, 11 - 17 November 2016, Phoenix, Arizona, USA. doi: 10.1115/IMECE2016-66314
Strotos, G., Malgarinos, I., Nikolopoulos, N. & Gavaises, M. (2016). Aerodynamic breakup of an n-decane droplet in a high temperature gas environment. Fuel, 185, pp. 370-380. doi: 10.1016/j.fuel.2016.08.014
Strotos, G., Malgarinos, I., Nikolopoulos, N. & Gavaises, M. (2016). Numerical investigation of aerodynamic droplet breakup in a high temperature gas environment. Fuel, 181, pp. 450-462. doi: 10.1016/j.fuel.2016.04.126
Strotos, G., Malgarinos, I., Nikolopoulos, N. & Gavaises, M. (2016). Predicting droplet deformation and breakup for moderate Weber numbers. International Journal of Multiphase Flow, 85, pp. 96-109. doi: 10.1016/j.ijmultiphaseflow.2016.06.001
Strotos, G., Malgarinos, I., Nikolopoulos, N. & Gavaises, M. (2016). Predicting the evaporation rate of stationary droplets with the VOF methodology for a wide range of ambient temperature conditions. International Journal of Thermal Sciences, 109, pp. 253-262. doi: 10.1016/j.ijthermalsci.2016.06.022
Sun, Z. & Bruecker, C. (2016). PIV Study of Flow Separations at a Forward-Facing Step using Long-Range Microscope. Paper presented at the 2016 Applied Aerodynamics Conference: Evolution & Innovation Continues - The Next 150 Years of Concepts, Design and Operations, 19-21 Jul 2016, Bristol, UK.
Sun, Z., Bruecker, C. & Pointz, B. (2016). Transition of A Vortex Ring Visualized by 3D Scanning TomoPIV. Paper presented at the 18th International Symposium on Applications of Laser Techniques to Fluid Mechanics, 4-7 Jul 2016, Lisbon, Portugal.
Sun, Z., Pointz, B. & Bruecker, C. ORCID: 0000-0001-5834-3020 (2016). Transition of a vortex ring measured by 3D scanning Tomo-PIV. Paper presented at the 18th International Symposium on Applications of Laser Techniques to Fluid Mechanics, 4-7 Jul 2016, Lisbon, Portugal.
Tamanani, M., Gian, Y. & Ayoub, A. (2016). Evaluation of code criteria for bridges with unequal pier heights. Bulletin of Earthquake Engineering, 14(11), pp. 3151-3174. doi: 10.1007/s10518-016-9941-4
Tapoglou, N., Mehnen, J., Butans, J. & Morar, N. ORCID: 0000-0001-9109-8864 (2016). Online on-board Optimization of Cutting Parameter for Energy Efficient CNC Milling. In: Seliger, G., Kohl, H. & Mallon, J. (Eds.), Procedia CIRP. 13th Global Conference on Sustainable Manufacturing - Decoupling Growth from Resource Use, 16-18 Sep 2016, Vietnam. doi: 10.1016/j.procir.2016.01.072
Thu, H. N., Venugopalan, T., Sun, T. & Grattan, K. T. V. (2016). Intrinsic Fiber Optic pH Sensor for Measurement of pH Values in the Range of 0.5-6. IEEE Sensors Journal, 16(4), pp. 881-887. doi: 10.1109/jsen.2015.2490583
Tomic, Ivana (2016). Distributed LQR control of multi-agent systems. (Unpublished Doctoral thesis, City, University of London)
Tomić, I. & Halikias, G. (2016). Robustness Properties of Distributed Configurations in Multi-Agent Systems. IFAC-PapersOnLine, 49(9), pp. 86-91. doi: 10.1016/j.ifacol.2016.07.500
Tomić, I., Milonidis, E. & Halikias, G. (2016). LQR distributed cooperative control of a formation of low-speed experimental UAVs. In: 2016 UKACC 11th International Conference on Control (CONTROL). . Institute of Electrical and Electronics Engineers (IEEE). doi: 10.1109/CONTROL.2016.7737541
Trainba, Mahmud (2016). Estimation of the Developed Overvoltages at the Entrance of a HV/MV Substation. (Unpublished Doctoral thesis, City, University of London)
Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 & Papadopoulos, T. (2016). A FE parametric study of RWS beam-to-column bolted connections with cellular beams. Journal of Constructional Steel Research, 116, pp. 92-113. doi: 10.1016/j.jcsr.2015.08.046
Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979, Shaheen, M. A., Baniotopoulos, C. & Salem, E. (2016). Analytical approach of anchor rod stiffness and steel base plate calculation under tension. Structures, 5, pp. 207-218. doi: 10.1016/j.istruc.2015.11.001
Turkay, C. & Sathiyanarayanan, M. (2016). Is Multi-perspective Visualisation recommended for E-discovery Email Investigations?. Paper presented at the IEEE VIS 2016 Workshop - Creation, Curation, Critique and Conditioning of Principles and Guidelines in Visualization, 23 Oct 2016, Baltimore, USA.
Ul Asad, H. (2016). Formal verification of analog and mixed signal circuits using deductive and bounded approaches. (Unpublished Doctoral thesis, City University London)
Uus, A., Liatsis, P., Slabaugh, G. G. , Anagnostis, A., Roberts, S. & Twist, S. (2016). Trend Deviation Analysis for Automated Detection of Defects in GPR Data for Road Condition Surveys. Proceedings of the 23rd International Conference on Systems, Signals and Image Processing (IWSSIP 2016), doi: 10.1109/IWSSIP.2016.7502765
Uus, Alena (2016). Patient-specific blood flow modelling in diagnosis of coronary artery disease. (Unpublished Doctoral thesis, City University London)
Vidakovic, M., Armakolas, I., Sun, T. , Carlton, J. & Grattan, K. T. V. (2016). Fibre Bragg Grating-based Acoustic Sensor Array for Improved Condition Monitoring of Marine Lifting Surfaces. Journal of Lightwave Technology, 34(18), pp. 4336-4342. doi: 10.1109/jlt.2016.2601122
Vidakovic, M., McCague, C., Armakolas, I. , Sun, T., Carlton, J. & Grattan, K. T. V. (2016). Fibre Bragg Grating-based Cascaded Acoustic Sensors for Potential Marine Structural Condition Monitoring. Journal of Lightwave Technology, 34(19), pp. 4473-4478. doi: 10.1109/jlt.2016.2587161
Vidovics, B., Vukasinovic, N., Pavkovic, N. & Kovacevic, A. ORCID: 0000-0002-8732-2242 (2016). Development of methodology for distributed collaborative design environment. In: Proceedings of the 18th International Conference on Engineering and Product Design Education (E&PDE16), Design Education: Collaboration and Cross-Disciplinarity. 18th International Conference on Engineering and Product Design Education (E&PDE16), Design Education: Collaboration and Cross-Disciplinarity, 8 - 9 September 2016, Aalborg, Denmark.
Villa-Arango, S., Torres Villa, R., Kyriacou, P. A. & Lucklum, R. (2016). Cavity Resonance Sensor with Disposable Analyte Container for Point of Care Testing. IEEE Sensors Journal, 16(17), pp. 6727-6732. doi: 10.1109/jsen.2016.2584240
Viphavakit, C., Boonruang, S., Themistos, C. , Komodromos, M., Mohammed, W. S & Rahman, B. M. (2016). Surface plasmon resonance-enhanced light interaction in an integrated ormocomp nanowire. Optical and Quantum Electronics, 48(5), article number 291. doi: 10.1007/s11082-016-0499-9
Wang, J., Ma, Q. & Yan, S. (2016). A hybrid model for simulating rogue waves in random seas on a large temporal and spatial scale. Journal of Computational Physics, 313, pp. 279-309. doi: 10.1016/j.jcp.2016.02.044
Wang, Y., Sun, T., Fabian, M. , Grattan, K. T. V., Forman, T. & Mutschler, R. (2016). Development of Optical Fibre Humidity Sensors for Assessing the Quality of Housing Insulation Materials. Paper presented at the 2016 15th International Conference on Optical Communications and Networks (ICOCN), 24-27 Sep 2016, Hangzhou, China.
White, M. ORCID: 0000-0002-7744-1993 & Sayma, A. I. (2016). Improving the economy-of-scale of small organic rankine cycle systems through appropriate working fluid selection. Applied Energy, 183, pp. 1227-1239. doi: 10.1016/j.apenergy.2016.09.055
Yan, D., Kovacevic, A., Tang, Q. & Zhang, W. H. (2016). Numerical modelling of twin-screw pumps based on computational fluid dynamics. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 231(24), pp. 4617-4634. doi: 10.1177/0954406216670684
Yang, G., Zomorodian, M., Belarbi, A. & Ayoub, A. (2016). Uniaxial Tensile Stress-Strain Relationships of RC Elements Strengthened with FRP Sheets. Journal of Composites for Construction, 20(3), article number 04015075. doi: 10.1061/(asce)cc.1943-5614.0000639
Yang, H., Yan, S. & Ma, Q. (2016). Effects of tank motion on oil spilling from damaged oil tanks. Proceedings of the International Offshore and Polar Engineering Conference, 2016-J, pp. 1013-1020.
Yang, H., Yan, S., Ma, Q. , Lu, J. & Zhou, Y. (2016). Turbulence modelling and role of compressibility on oil spilling from a damaged double hull tank. International Journal for Numerical Methods in Fluids, 83(11), pp. 841-865. doi: 10.1002/fld.4294
Yang, L., Yang, H., Yan, S. , Ma, Q. & Bihnam, M. (2016). Comparative study on water impact problem. Proceedings of the International Offshore and Polar Engineering Conference, 2016-J, pp. 27-34.
Ysehak Abay, T. (2016). Reflectance photoplethysmography for non-invasive monitoring of tissue perfusion. (Unpublished Doctoral thesis, City, University of London)
Zaidi, S. (2016). Detecting Rogue Nodes In Vehicular Ad-hoc Networks (DETER). (Unpublished Doctoral thesis, City, University of London)
Zhao, S., Shmaliy, Y. S., Ji, G. & Khan, S. (2016). Fast bias-constrained optimal FIR filtering for time-invariant state space models. International Journal of Adaptive Control and Signal Processing, 31(7), pp. 1061-1076. doi: 10.1002/acs.2747
Zhou, Y., Ma, Q. & Yan, S. (2016). MLPG_R method for modelling 2D flows of two immiscible fluids. International Journal for Numerical Methods in Fluids, 84(7), pp. 385-408. doi: 10.1002/fld.4353
Zomorodian, M., Yang, G., Belarbi, A. & Ayoub, A. (2016). Cracking behavior and crack width predictions of FRP strengthened RC members under tension. Engineering Structures, 125, pp. 313-324. doi: 10.1016/j.engstruct.2016.06.042
van Bokhorst, E., Placidi, M. & Atkin, C.J. (2016). The influence of the spatial frequency content of discrete roughness distributions on the development of the crossflow instability. In: 8th AIAA Flow Control Conference. . Reston, VA, United States: American Institute of Aeronautics and Astronautics. doi: 10.2514/6.2016-3931
2015
Abay, T. & Kyriacou, P. A. (2015). Accuracy of reflectance photoplethysmography on detecting cuff-induced vascular occlusions. 37th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), 2015, pp. 861-864. doi: 10.1109/EMBC.2015.7318498
Abay, T. & Kyriacou, P. A. (2015). Reflectance Photoplethysmography as Non-Invasive Monitoring of Tissue Blood Perfusion.. IEEE Trans Biomed Eng, 62(9), pp. 2187-2195. doi: 10.1109/tbme.2015.2417863
Abdi, M. (2015). Multi-electrode stimulation and measurement patterns versus prior information of fast 3D EIT. (Unpublished Masters thesis, City, University of London)
Abdollahi, Z., Kyriacou, P. A. & Phillips, J. P. (2015). Evaluation of optical interference in a combined measurement system used for assessment of tissue blood flow. SPIE Proceedings, 9315(93150R), doi: 10.1117/12.2079760
Abdollahi, Z., Thaha, M. A., Ramsanahie, A. , Ahmed, S., Kyriacou, P. A. & Phillips, J. P. (2015). Performance of a novel optical sensor for intraoperative assessment of intestinal viability - 'proof of principle' study. GUT, 64, A47-A48. doi: 10.1136/gutjnl-2015-309861.95
Abokhedr, M., Vogiatzaki, K., Mitroglou, N. & Gavaises, E. (2015). A numerical simulation of single and two-phase flow in porous media: A pore sale observation of effective microscopic forces. Paper presented at the 6th BETA CAE International Conference, 10-6-2015 - 12-6-2015, MET Hotel, Thessaloniki, Greece.
Aghaee, K., Yazdi, M. & Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 (2015). Investigation into the mechanical properties of structural lightweight concrete reinforced with waste steel wires. Magazine of Concrete Research, 67(4), pp. 197-205. doi: 10.1680/macr.14.00232
Ahumada, A., Altunkaynak, A. & Ayoub, A. (2015). Fuzzy logic-based attenuation relationships of strong motion earthquake records. Expert Systems with Applications, 42(3), pp. 1287-1297. doi: 10.1016/j.eswa.2014.09.035
Andrienko, G. & Andrienko, N. (2015). Visualization Support to Interactive Cluster Analysis. Lecture Notes in Computer Science, 9286, pp. 337-340. doi: 10.1007/978-3-319-23461-8_43
Apostolopoulou, D. ORCID: 0000-0002-9012-9910, Sauer, P. W. & Dominguez-Garcia, A. D. (2015). Balancing Authority Area Coordination with Limited Exchange of Information. Paper presented at the 2015 IEEE Power & Energy Society General Meeting, 26-30 Jul 2015, Denver, USA.
Arjeneh, M., Kovacevic, A., Manolis, M. & Stosic, N. (2015). Numerical and Experimental Investigation of Pressure Losses at Suction of a Twin Screw Compressor. IOP Conference Series: Materials Science and Engineering, 90(1), article number 012006. doi: 10.1088/1757-899x/90/1/012006
Asif, W., Lestas, M., Qureshi, H. K. & Rajarajan, M. (2015). Spectral Partitioning for Node Criticality. 2015 IEEE Symposium on Computers and Communication (ISCC), 2016-February, pp. 877-882. doi: 10.1109/iscc.2015.7405624
Athanasios, N., Nikolopoulos, N., Nikolaos, M. , Panagiotis, G. & Kakaras, E. (2015). Optimization of a log wood boiler through CFD simulation methods. Fuel Processing Technology, 137, pp. 75-92. doi: 10.1016/j.fuproc.2015.04.010
Atkin, C.J. & Backer Dirks, T. (2015). Systems driven HLFC design. Paper presented at the 50th 3AF International Conference on Applied Aerodynamics, 30 Mar - 01 Apr 2015, Toulouse, France.
Atsonios, K., Violidakis, I., Agraniotis, M. , Grammelis, P., Nikolopoulos, N. & Kakaras, E. (2015). Thermodynamic analysis and comparison of retrofitting pre-drying concepts at existing lignite power plants. Applied Thermal Engineering, 74, pp. 165-173. doi: 10.1016/j.applthermaleng.2013.11.007
Banerjee, J. R. (2015). Advances in structural dynamics, aeroelasticity and material science. (Unpublished Doctoral thesis, City University London)
Banerjee, J. R., Papkov, S.O., Liu, X. & Kennedy, D. (2015). Dynamic stiffness matrix of a rectangular plate for the general case. JOURNAL OF SOUND AND VIBRATION, 342, pp. 177-199. doi: 10.1016/j.jsv.2014.12.031
Barambones, O., Irigoyen, E. & Tomas-Rodriguez, M. (2015). Introduction to the special section "Techniques of stability of fuzzy control systems". Revista Iberoamericana de Automática e Informática Industrial RIAI, 12(4), pp. 432-433. doi: 10.1016/j.riai.2015.09.003
Barh, A., Varshney, R. K., Agrawal, G. P. , Rahman, B. M. & Pal, B. P. (2015). Plastic fiber design for THz generation through wavelength translation. Optics Letters, 40(9), pp. 2107-2110. doi: 10.1364/ol.40.002107
Bender, S. B., Castorena-Gonzalez, J. A., Garro, M. , Reyes-Aldasoro, C. C., Sowers, J. R., DeMarco, V. G. & Martinez-Lemus, L. A. (2015). Regional variation in arterial stiffening and dysfunction in western diet-induced obesity. AJP - Heart and Circulatory Physiology, 309(4), H574-H582. doi: 10.1152/ajpheart.00155.2015
Bergeles, G., Koukouvinis, P., Gavaises, M. , Li, J. & Wang, L. (2015). An Erosion Aggressiveness Index (EAI) Based on Pressure Load Estimation Due to Bubble Collapse in Cavitating Flows Within the RANS Solvers. SAE International Journal of Engines, 8(5), pp. 2276-2284. doi: 10.4271/2015-24-2465
Berger, T., Halikias, G. & Karcanias, N. (2015). Effects of dynamic and non-dynamic element changes in RC and RL networks. International Journal of Circuit Theory and Applications, 43(1), pp. 36-59. doi: 10.1002/cta.1923
Blazakis, K. N., Madzvamuse, A., Reyes-Aldasoro, C. C. , Styles, V. & Venkataraman, C. (2015). Whole cell tracking through the optimal control of geometric evolution laws. Journal of Computational Physics, 297, pp. 495-514. doi: 10.1016/j.jcp.2015.05.014
Buckney, D., Kovacevic, A. & Stosic, N. (2015). Rotor clearance design and evaluation for an oil injected twin screw compressor. IOP Conference Series: Materials Science and Engineering, 90(1), article number 012003. doi: 10.1088/1757-899x/90/1/012003
Budidha, K. ORCID: 0000-0002-6329-8399, Ysehak Abay, T. ORCID: 0000-0002-9096-7551 & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2015). Comparison of cerebral blood flow auto regulation with peripheral blood flow autoregulation using photoplethysmography
Budidha, K., Abay, T. & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2015). Investigation of photoplethysmography, laser doppler flowmetry and near infrared spectroscopy during induced thermal stress. In: 37th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC). 37th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), 25-29 Aug 2015, Milan, Italy. doi: 10.1109/EMBC.2015.7319861
Budidha, K. & Kyriacou, P. A. (2015). Investigation of photoplethysmography and arterial blood oxygen saturation from the ear-canal and the finger under conditions of artificially induced hypothermia. Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS, 2015-N, pp. 7954-7957. doi: 10.1109/EMBC.2015.7320237
Camara, A. & Ruiz-Teran, A. M. (2015). Multi-mode traffic-induced vibrations in composite ladder-deck bridges under heavy moving vehicles. Journal of Sound and Vibration, 355, pp. 264-283. doi: 10.1016/j.jsv.2015.06.026
Chatterjee, S., Phillips, J. P. & Kyriacou, P. A. (2015). Differential pathlength factor estimation for brain-like tissue from a single-layer Monte Carlo model. 37th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), 2015, pp. 3279-3282. doi: 10.1109/EMBC.2015.7319092
Chatzi, E. N., Giaralis, A. ORCID: 0000-0002-2952-1171 & Kougioumtzoglou, I. A. (2015). Foreword - Special Issue on Data Acquisition and Processing, Uncertainty Management and Inverse Problem Techniques for Structural Health Monitoring Applications. International Journal of Sustainable Materials and Structural Systems, 2(1/2), pp. 1-2.
Cho, C-G., Kappos, A. J., Moon, H-J. & Lim, H-J. (2015). Experiments and failure analysis of SHCC and reinforced concrete composite slabs. Engineering Failure Analysis, 56, pp. 320-331. doi: 10.1016/j.engfailanal.2015.01.009
Chrysostomou, C. Z., Kyriakides, N., Papanikolaou, V.K. , Kappos, A. J., Dimitrakopoulos, E. G. & Giouvanidis, A. I. (2015). Vulnerability assessment and feasibility analysis of seismic strengthening of school buildings. Bulletin of Earthquake Engineering, 13(12), pp. 3809-3840. doi: 10.1007/s10518-015-9791-5
Davenport, J. J., Hickey, M., Phillips, J. P. & Kyriacou, P. A. (2015). A fiberoptic sensor for tissue carbon dioxide monitoring. 37th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), 2015, pp. 7942-7945. doi: 10.1109/EMBC.2015.7320234
Demetriou, D., Nikitas, N. & Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 (2015). Semi active tuned mass dampers of buildings: A simple control option. American Journal of Engineering and Applied Sciences, 8(4), pp. 620-632. doi: 10.3844/ajeassp.2015.620.632
Dhand, A. & Pullen, K. R. (2015). Analysis of continuously variable transmission for flywheel energy storage systems in vehicular application. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 229(2), pp. 273-290. doi: 10.1177/0954406214533096
Dhand, A. & Pullen, K. R. (2015). Optimal energy management for a flywheel-assisted battery electric vehicle. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 229(12), pp. 1672-1682. doi: 10.1177/0954407014567720
Dhand, A. & Pullen, K. R. (2015). Review of battery electric vehicle propulsion systems incorporating flywheel energy storage. International Journal of Automotive Technology, 16(3), pp. 487-500. doi: 10.1007/s12239-015-0051-0
Divall, S. & Goodey, R.J. (2015). Twin-tunnelling-induced ground movements in clay. Proceedings of the Institution of Civil Engineers: Geotechnical Engineering, 168(3), pp. 247-256. doi: 10.1680/geng.14.00054
Fahad, L. G., Khan, A. U. & Rajarajan, M. (2015). Activity recognition in smart homes with self verification of assignments. Neurocomputing, 149(PC), pp. 1286-1298. doi: 10.1016/j.neucom.2014.08.069
Fahad, L. G. & Rajarajan, M. (2015). Integration of discriminative and generative models for activity recognition in smart homes. Applied Soft Computing Journal, 37, pp. 992-1001. doi: 10.1016/j.asoc.2015.03.045
Favier, J., Revell, A. & Pinelli, A. (2015). Numerical study of flapping filaments in a uniform fluid flow. Journal of Fluids and Structures, 53, pp. 26-35. doi: 10.1016/j.jfluidstructs.2014.11.010
Fonseca, J., Reyes-Aldasoro, C. C., O'Sullivan, C. & Coop, M. R. (2015). Experimental investigation into the primary fabric of stress transmitting particles. In: Soga, K., Kumar, K., Biscontin, G. & Kuo, M. (Eds.), Geomechanics from Micro to Macro. (pp. 1019-1024). London, UK: CRC Press.
Fonseca, J., Reyes-Aldasoro, C. C. & Wils, L. (2015). Three-dimensional quantification of the morphology and intragranular void ratio of a shelly carbonate sand. Paper presented at the Sixth International Symposium on Deformation Characteristics of Geomaterials, 15-11-2015 - 18-11-2015, Buenos Aires.
Fu, X., Li, S., Fairbank, M. , Wunsch, D. C. & Alonso, E. (2015). Training Recurrent Neural Networks With the Levenberg-Marquardt Algorithm for Optimal Control of a Grid-Connected Converter. IEEE Transactions on Neural Networks and Learning Systems, 26(9), pp. 1900-1912. doi: 10.1109/tnnls.2014.2361267
Gabdullin, N. & Khan, S. (2015). Review of properties of magnetic shape memory (MSM) alloys and MSM actuator designs. Journal of Physics: Conference Series, 588(1), article number 012052. doi: 10.1088/1742-6596/588/1/012052
Gama, Carolina (2015). Investigation of splanchnic perfusion utilising an intraluminal opto-electronic sensor placed in the duodenum. (Unpublished Doctoral thesis, City University London)
Gavaises, M., Villa, F., Koukouvinis, P. , Marengo, M. & Franc, J-P. (2015). Visualisation and les simulation of cavitation cloud formation and collapse in an axisymmetric geometry. International Journal of Multiphase Flow, 68, pp. 14-26. doi: 10.1016/j.ijmultiphaseflow.2014.09.008
Georgoulas, A., Koukouvinis, P., Gavaises, M. & Marengo, M. (2015). Numerical investigation of quasi-static bubble growth and detachment from submerged orifices in isothermal liquid pools: The effect of varying fluid properties and gravity levels. International Journal of Multiphase Flow, 74, pp. 59-78. doi: 10.1016/j.ijmultiphaseflow.2015.04.008
Giaralis, A. ORCID: 0000-0002-2952-1171 & Kougioumtzoglou, I. A. (2015). A stochastic dynamics approach for response spectrum analysis of bilinear systems using time-dependent equivalent linear properties. In: Proceedings of the 12th International Conference on Applications of Statistics and Probability in Civil Engineering (ICASP12). . Vancouver: University of British Columbia Library. doi: 10.14288/1.0076259
Giaralis, A. ORCID: 0000-0002-2952-1171 & Taflanidis, A. A. (2015). Reliability-based design of tuned mass-damper-inerter (TMDI) equipped multi-storey frame buildings under seismic excitation. In: Proceedings of the 12th International Conference on Applications of Statistics and Probability in Civil Engineering (ICASP12). . Vancouver: University of British Columbia Library. doi: 10.14288/1.0076257
Gkatzogias, K.I. & Kappos, A. J. (2015). Deformation-based seismic design of concrete bridges. Earthquakes and Structures, 9(5), pp. 1045-1067. doi: 10.12989/eas.2015.9.5.1045
Gkoktsi, K. & Giaralis, A. (2015). Effect of frequency domain attributes of wavelet analysis filter banks for structural damage localization using the relative wavelet entropy index. International Journal of Sustainable Materials and Structural Systems, 2(1/2), pp. 134-160. doi: 10.1504/ijsmss.2015.078365
Gkoktsi, K., TauSiesakul, B. & Giaralis, A. (2015). Multi-channel sub-Nyquist cross-Spectral Estimation for Modal Analysis of Vibrating Structures. In: Systems, Signals and Image Processing (IWSSIP), 2015 International Conference on. nternational Conference on Systems, Signals and Image Processing (IWSSIP 2015), 10-12 Sep 2015, London, UK. doi: 10.1109/IWSSIP.2015.7314232
Gong, P., Chen, T. & Xu, Q. (2015). ETARP: An Energy Efficient Trust-Aware Routing Protocol for Wireless Sensor Networks. Journal of Sensors, 2015, pp. 1-10. doi: 10.1155/2015/469793
Gowree, E. R. & Atkin, C. J. (2015). On the turbulent mean-flow at the leading edge of a swept wing. Paper presented at the 50th 3AF International Conference on Applied Aerodynamics, 30 Mar - 01 Apr 2015, Toulouse, France.
Gowree, E. R., Atkin, C. J. & Gruppetta, S. (2015). A simple digital-optical system to improve accuracy of hot-wire measurements. MEASUREMENT SCIENCE and TECHNOLOGY, 26(9), article number 095303. doi: 10.1088/0957-0233/26/9/095303
Granados-Cruz, M., Shmaliy, Y. S., Khan, S. , Ahn, C. K. & Zhao, S. (2015). New results in nonlinear state estimation using extended unbiased fir filtering. 2015 23rd European Signal Processing Conference (EUSIPCO), 50, pp. 679-683. doi: 10.1109/eusipco.2015.7362469
Grattan, K. T. V., Jia, Y., Gutfreund, E. , Savvides, S., Shi, S., Bai, Y., Fabian, M., Sun, T. & McCague, C. (2015). Densification of Fresh Concrete by Microwave. In: 35th Cement and Concrete Science Conference (CCSC 35). 35th Cement and Concrete Science Conference, 26-28 Aug 2015, Aberdeen, Scotland.
Guo, L., Gao, S. & Fu, F. ORCID: 0000-0002-9176-8159 (2015). Structural performance of semi-rigid composite frame under column loss. Engineering Structures, 95, pp. 112-126. doi: 10.1016/j.engstruct.2015.03.049
He, Y., Jejjala, V., Matti, C. , Nelson, B. D. & Stillman, M. (2015). The Geometry of Generations. Communications in Mathematical Physics, 339(1), pp. 149-190. doi: 10.1007/s00220-015-2416-7
Hickey, M., Phillips, J. P. & Kyriacou, P. A. (2015). Venous pooling and drainage affects photoplethysmographic signals at different vertical hand positions. Optical Diagnostics and Sensing XV: Toward Point-of-Care Diagnostics, 9332, article number 93320I. doi: 10.1117/12.2076732
Hickey, M., Phillips, J.P. & Kyriacou, P. A. (2015). The effect of vascular changes on the photoplethysmographic signal at different hand elevations. Physiological Measurement, 36(3), pp. 425-440. doi: 10.1088/0967-3334/36/3/425
Hoffmann, E. & Reyes-Aldasoro, C. C. (2015). Automatic segmentation of centromeres, foci and delineation of chromosomes. Paper presented at the Medical Image Understanding and Analysis 2015, 15-7-2015 - 17-7-2015, University of Lincoln.
Huang, Y., Reyes-Aldasoro, C. C., Persoone, G. & Wlodkowic, D. (2015). Integrated microfluidic technology for sub-lethal and behavioral marine ecotoxicity biotests. In: Progress in Biomedical Optics and Imaging - Proceedings of SPIE. Bio-MEMS and Medical Microdevices II, 5-5-2015 - 6-5-2015, Hotel Alimara, Barcelona, Spain. doi: 10.1117/12.2180692
Ioannou, Eleni (2015). The effects of temperature distortion on aerodynamics and low engine order forced response in axial turbines. (Unpublished Doctoral thesis, City University London)
Jagadeesh, C., Gowree, E. R. & Atkin, C. J. (2015). Development of a quantitative Schlieren imaging technicque for acoustic waves. Paper presented at the 51st 3AF International Conference on Applied Aerodynamics, 4-6 Apr 2016, Strasbourg, France.
Jiang, H., Chen, W., Zhang, Q. & He, L. (2015). Analytical-Solution Based Corner Correction for Transient Thermal Measurement. Journal of Heat Transfer, 137(11), article number 111302. doi: 10.1115/1.4030980
Kaparias, I., Bell, M. G. H., Biagioli, T. , Bellezza, L. & Mount, B. (2015). Behavioural analysis of interactions between pedestrians and vehicles in street designs with elements of shared space. Transportation Research Part F: Traffic Psychology and Behaviour, 30, pp. 115-127. doi: 10.1016/j.trf.2015.02.009
Kaparias, I., Liu, P., Tsakarestos, A. , Eden, N., Schmitz, P., Hoadley, S. & Hauptmann, S. (2015). Development and testing of a predictive traffic safety evaluation tool for road traffic management and ITS impact assessment. Paper presented at the mobil.TUM 2015 International Scientific Conference on Mobility and Transport, 30-6-2015 - 1-7-2015, Munich.
Kaparias, I., Rossetti, C. & Trozzi, V. (2015). Analysing passenger arrivals rates and waiting time at bus stops. Paper presented at the 94th Annual Meeting of the Transportation Research Board, 11-01-2015 - 15-01-2015, Washington, DC, USA.
Kappos, A. J. (2015). Performance-Based Seismic Design and Assessment of Bridges. Perspectives on European Earthquake Engineering and Seismology, 39, pp. 163-205. doi: 10.1007/978-3-319-16964-4_7
Karathanassis, I. K., Papanicolaou, E., Belessiotis, V. & Bergeles, G. (2015). Experimental and numerical evaluation of an elongated plate-fin heat sink with three sections of stepwise varying channel width. International Journal of Heat and Mass Transfer, 84, pp. 16-34. doi: 10.1016/j.ijheatmasstransfer.2014.12.013
Karcanias, N., Hessami, A. G. & Alonso, E. (2015). Complexity of Multi-Modal Transportation and Systems of Systems. Paper presented at the 47th Annual Universities’ Transport Study Group Conference (UTSG 2015), 24 Dec 2014 - 5 Jan 2015, London, UK.
Karim, M. R., Rahman, B. M. & Agrawal, G. P. (2015). Mid-infrared supercontinuum generation using dispersion-engineered Ge11.5As24Se64.5 chalcogenide channel waveguide. Optics Express, 23(5), pp. 6903-6914. doi: 10.1364/oe.23.006903
Karim, M. R., Rahman, B. M., Azabi, Y. O. , Agrawal, A. & Agrawal, G. P. (2015). Ultra-broadband mid-infrared supercontinuum generation through dispersion engineering of chalcogenide microstructured fibers. Journal of the Optical Society of America B, 32(11), pp. 2343-2351. doi: 10.1364/josab.32.002343
Karvounis, A., Ou, J.Y., Wu, W. , MacDonald, K.F. & Zheludev, N.I. (2015). Nano-optomechanical nonlinear dielectric metamaterials. Applied Physics Letters, 107(19), article number 191110. doi: 10.1063/1.4935795
Kather, J. N., Marx, A., Reyes-Aldasoro, C. C. , Schad, L. R., Zöllner, F. G. & Weis, C. A. (2015). Continuous representation of tumor microvessel density and detection of angiogenic hotspots in histological whole-slide images. Oncotarget, 6(22), pp. 19163-19176. doi: 10.18632/oncotarget.4383
Kejalakshmy, N., Grattan, K. T. V. & Rahman, B. M. (2015). Investigation of the Optical Modal Properties of Al+3 Doped ZnO-Coated Au Waveguide for Gas Sensing Applications Using the Finite Element Method. IEEE Sensors Journal, 16(5), pp. 1176-1181. doi: 10.1109/jsen.2015.2498943
Koehler, M., Hess, D. & Bruecker, C. (2015). Flying PIV measurements in a 4-valve IC engine water analogue to characterize the near-wall flow evolution. Measurement Science and Technology, 26(12), article number 125302. doi: 10.1088/0957-0233/26/12/125302
Kogan, I., Pacholak, S., Licht, M. , Schneider, J., Brücker, C. & Brandt, S. (2015). The invisible fish: hydrodynamic constraints for predator-prey interaction in fossil fish Saurichthys compared to recent actinopterygians. Biology Open, 4(12), pp. 1715-1726. doi: 10.1242/bio.014720
Koukouvinis, P., Bergeles, G. & Gavaises, M. (2015). A cavitation aggressiveness index within the Reynolds averaged Navier Stokes methodology for cavitating flows. Journal of Hydrodynamics, Ser. B, 27(4), pp. 579-586. doi: 10.1016/s1001-6058(15)60519-4
Koukouvinis, P. & Gavaises, M. (2015). Simulation of throttle flow with two phase and single phase homogenous equilibrium model. Journal of Physics: Conference Series, 656(1), article number 012086. doi: 10.1088/1742-6596/656/1/012086
Koukouvinis, P., Gavaises, M., Georgoulas, A. & Marengo, M. (2015). Compressible bubble dynamic simulations with central-upwind schemes. Journal of Physics: Conference Series, 656(1), article number 012087. doi: 10.1088/1742-6596/656/1/012087
Koukouvinis, P., Gavaises, M., Li, J. & Wang, L. (2015). Large Eddy Simulation of diesel injector opening with a two phase cavitation model. Journal of Physics: Conference Series, 656(1), article number 012088. doi: 10.1088/1742-6596/656/1/012088
Kouris, L.A.S. & Kappos, A. J. (2015). Fragility curves and loss estimation for traditional timber-framed masonry buildings in Lefkas, Greece. Computational Methods in Applied Sciences, 37, pp. 199-233. doi: 10.1007/978-3-319-16130-3_8
Kovacevic, A. (2015). 9th International Conference on Compressors and their Systems. IOP Conference Series: Materials Science and Engineering, 90(011001), doi: 10.1088/1757-899X/90/1/011001
Kovacevic, A. & Stosic, N. (2015). Analytical Grid Generation for accurate representation of clearances in CFD for Screw Machines. IOP Conference Series: Materials Science and Engineering, 90(1), article number 012008. doi: 10.1088/1757-899x/90/1/012008
Köhnen, C., Überall, C., Rajarajan, M. , Jager, R. & Rakocevic, V. (2015). Autonomous QoS Management and Policing in Unmanaged Local Area Networks. Journal of Computer Networks and Communications, 2015, pp. 1-24. doi: 10.1155/2015/790375
Laksmi, B., Nouri, J. M., Brabazon, D. & Naher, S. (2015). Prediction of properties for the production and application of graphene reinforced metal matrix composites. Paper presented at the 8th International Conference on Sustainable Energy & Environmental Protection (SEEP 2015), 11-14 August 2015, University of the West of Scotland, Paisley.
Le, B. T., Divall, S. & Taylor, R.N. (2015). The effect of a forepole umbrella system on the stability of a tunnel face in clay. In: Proceedings of the XVI ECSMGE Geotechnical Engineering for Infrastructure and Development. XVI European Conference on Soil Mechanics and Geotechnical Engineering (ECSMGE), 13-17 Sep 2015, Edinburgh, UK.
Leandro, D., Ams, M., Lopez-Amo, M. , Sun, T. & Grattan, K. T. V. (2015). Simultaneous Measurement of Strain and Temperature Using a Single Emission Line. Journal of Lightwave Technology, 33(12), pp. 2426-2431. doi: 10.1109/jlt.2014.2374531
Leandrou, S., Petroudi, S., Kyriacou, P. A. , Reyes-Aldasoro, C. C. & Pattichis, C. S. (2015). An overview of quantitative magnetic resonance imaging analysis studies in the assessment of alzheimer’s disease. IFMBE Proceedings, 57, pp. 281-286. doi: 10.1007/978-3-319-32703-7_56
Li, Q., Ma, Q.W. ORCID: 0000-0001-5579-6454 & Yan, S. ORCID: 0000-0001-8968-6616 (2015). Investigations on the feature of turbulent viscosity associated with vortex shedding. Procedia Engineering, 126, pp. 73-77. doi: 10.1016/j.proeng.2015.11.181
Li, S., Alonso, E., Fairbank, M. , Jaithwa, I. & Wunsch, D. C. (2015). Hardware Validation for Control of Three-Phase Grid-Connected Microgrids Using Artificial Neural Networks. Paper presented at the 12th International Conference on Applied Computing 2015, 24-10-2015 - 26-10-2015, Maynooth, Ireland.
Li, Y. Q., Hu, Z., Fang, X. & Fonseca, J. (2015). Analysis of micro characteristics and influence factors of foundation pit failure. In: Soga, K., Kumar, K., Biscontin, G. & Kuo, M. (Eds.), Geomechanics from Micro to Macro. (pp. 565-570). London, UK: CRC Press.
Liu, X. & Banerjee, J. R. (2015). An exact spectral-dynamic stiffness method for free flexural vibration analysis of orthotropic composite plate assemblies - Part I: Theory. Composite Structures, 132, pp. 1274-1287. doi: 10.1016/j.compstruct.2015.07.020
Liu, X. & Banerjee, J. R. (2015). An exact spectral-dynamic stiffness method for free flexural vibration analysis of orthotropic composite plate assemblies - Part II: Applications. Composite Structures, 132, pp. 1288-1302. doi: 10.1016/j.compstruct.2015.07.022
Llado, X., Imiya, A., Mason, D. , Reyes-Aldasoro, C. C., Aoki, K., Kudo, M., Zhang, Y. & Argyriou, V. (2015). Corrigendum to 'Homage to Professor Maria Petrou' [ Pattern Recognition Letters 48 (2014) 2-7].. Pattern Recognition Letters, 54(1), article number 109. doi: 10.1016/j.patrec.2015.01.006
Lockett, R. D., Fatmi, Z., Kuti, O. & Price, R. (2015). An Investigation into the Effect of Hydrodynamic Cavitation on Diesel using Optical Extinction. Journal of Physics: Conference Series, 656(1), article number 012091. doi: 10.1088/1742-6596/656/1/012091
Lockett, R. D., Ndamuso, N. & Price, R. (2015). Cavitation Inception in Immersed Jet Shear Flows. Journal of Physics: Conference Series, 656(1), article number 012090. doi: 10.1088/1742-6596/656/1/012090
Ma, Q., Yan, S., Greaves, D. , Mai, T. & Raby, A. (2015). Numerical and experimental studies of Interaction between FPSO and focusing waves. In: Proceedings of the International Offshore and Polar Engineering Conference. The Twenty-fifth International Offshore and Polar Engineering Conference, 21-26 Jun 2015, Hawaii, USA.
Madhav, K. V. & Kovacevic, A. (2015). Economics of water injected air screw compressor systems. IOP Conference Series: Materials Science and Engineering, 90(1), article number 012012. doi: 10.1088/1757-899x/90/1/012012
Malgarinos, I., Nikolopoulos, N. & Gavaises, M. (2015). Coupling a local adaptive grid refinement technique with an interface sharpening scheme for the simulation of two-phase flow and free-surface flows using VOF methodology. Journal of Computational Physics, 300, pp. 732-753. doi: 10.1016/j.jcp.2015.08.004
Mamo, J., Farrugia, P., Borg, J. , Wodehouse, A., Grierson, H. & Kovacevic, A. ORCID: 0000-0002-8732-2242 (2015). Using engineering design tools in multidisciplinary distributed student teams. In: Kovacevic, A. ORCID: 0000-0002-8732-2242, Bingham, G. & Parkinson, B. (Eds.), Proceedings of the 17th International Conference on Engineering and Product Design Education (E&PDE15), Great Expectations: Design Teaching, Research & Enterprise. 17th International Conference on Engineering and Product Design Education (E&PDE15), Great Expectations: Design Teaching, Research & Enterprise, 03 - 04 September 2015, Loughbourgh, UK.
Mamouei, M. H., Kaparias, I. & Halikias, G. (2015). A quantitative approach to behavioural analysis of drivers in highways using particle filtering. Paper presented at the 47th Annual Conference of the Universities’ Transport Study Group, 05-01-2015 - 07-01-2015, London, UK.
Maraveas, C., Balokas, G. & Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 (2015). Numerical evaluation on shell buckling of empty thin-walled steel tanks under wind load according to current American and European design codes. Thin-Walled Structures, 95, pp. 152-160. doi: 10.1016/j.tws.2015.07.007
Maraveas, C., Fasoulakis, Z. & Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 (2015). A review of human induced vibrations on footbridges. American Journal of Engineering and Applied Sciences, 8(4), pp. 422-433. doi: 10.3844/ajeassp.2015.422.433
May, J.M., Hickey, M., Triantis, I. , Palazidou, E. & Kyriacou, P. A. (2015). Spectrophotometric analysis of Lithium Carbonate used for Bipolar Disorder. Biomedical Optics Express, 6(3), pp. 1067-1073. doi: 10.1364/boe.6.001067
Mazzanti, G., Chen, G., Fothergill, J. , Hozumi, N., Li, J., Marzinotto, M., Mauseth, F., Morshuis, P., Reed, C., Tzimas, A. & Wu, K. (2015). A Protocol for Space Charge Measurements in Full-size HVDC Extruded Cables. IEEE Transactions on Dielectrics and Electrical Insulation, 22(1), pp. 21-34. doi: 10.1109/tdei.2014.004557
McGuinness-Abdollahi, Z., Thaha, M. A., Ramsanahie, A. , Ahmed, S., Kyriacou, P. A. & Phillips, J. P. (2015). Intraoperative monitoring of intestinal viability: Evaluation of a new combined sensor. Engineering in Medicine and Biology Society (EMBC), 2015 37th Annual International Conference of the IEEE, 2015, pp. 5126-5129. doi: 10.1109/EMBC.2015.7319545
Mergos, P.E. & Kappos, A. J. (2015). Estimating fixed-end rotations of reinforced concrete members at yielding and ultimate. Structural Concrete, 16(4), pp. 537-545. doi: 10.1002/suco.201400067
Mergos, P.E. & Kappos, A. J. (2015). A combined damage index for seismic assessment of non-ductile reinforced concrete structures. Civil-Comp Proceedings, 108, article number 144. doi: 10.4203/ccp.108.144
Miah, S., Kaparias, I. & Liatsis, P. (2015). Development and testing of a prototype instrumented bicycle model for the prevention of cyclist accidents. Paper presented at the 47th Annual Conference of the Universities’ Transport Study Group, 05-01-2015 - 07-01-2015, City University London, UK.
Miao, X., Zhang, Q., Wang, L. , Jiang, H. & Qi, H. (2015). Application of riblets on turbine blade endwall secondary flow control. Journal of Propulsion and Power, 31(6), pp. 1578-1585. doi: 10.2514/1.b35549
Milojevic, M. & Rakocevic, V. (2015). Location Aware Data Aggregation for Efficient Message Dissemination in Vehicular Ad Hoc Networks. IEEE Transactions on Vehicular Technology, 64(12), pp. 5575-5583. doi: 10.1109/tvt.2015.2487830
Mirshahi, M., Yan, Y. & Nouri, J. M. (2015). Influence of cavitation on near nozzle exit spray. Journal of Physics: Conference Series,, 656(1), article number 012093. doi: 10.1088/1742-6596/656/1/012093
Mishra, J. K., Priye, V. & Rahman, B. M. (2015). Error probability performance of a short-reach multicore fiber optical interconnect transmission system. Optics Letters, 40(19), pp. 4556-4559. doi: 10.1364/ol.40.004556
Mitroglou, N., Lorenzi, M., Santini, M. , Gavaises, M. & Assanis, D. (2015). Application of cone-beam micro-CT on high-speed Diesel flows and quantitative cavitation measurements. Journal of Physics: Conference Series, 656(1), article number 012094. doi: 10.1088/1742-6596/656/1/012094
Mohseni, E., Ranjbar, M. M. & Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 (2015). Durability Properties of High-Performance Concrete Incorporating Nano-TiO2 and Fly Ash. American Journal of Engineering and Applied Sciences, 8(4), pp. 519-526. doi: 10.3844/ajeassp.2015.519.526
Nadimi, S., Fonseca, J., Bésuelle, P. & Viggiani, G. (2015). A microstructural finite element analysis of cement damage on Fontainebleau Sandstone. Paper presented at the ICTMS 2015, 2nd International Conference on Tomography of Materials and Structures, 29 Jun - 3 Jul 2015, Québec, Canada.
Nadimi, S., Fonseca, J. & Taylor, N. (2015). A microstructure-based finite element analysis of the response of sand. Paper presented at the Sixth International Symposium on Deformation Characteristics of Geomaterials, 15-11-2015 - 18-11-2015, Buenos Aires.
Naseri, H., Koukouvinis, P. & Gavaises, M. (2015). Evaluation of Turbulence Models Performance in Predicting Incipient Cavitation in an Enlarged Step-Nozzle. Journal of Physics: Conference Series, 656(1), article number 012095. doi: 10.1088/1742-6596/656/1/012095
Netkachova, K., Bloomfield, R. E., Popov, P. T. & Netkachov, O. (2015). Using Structured Assurance Case Approach to Analyse Security and Reliability of Critical Infrastructures. In: Lecture Notes in Computer Science, Computer Safety Reliability and Security. SAFECOMP 2015 Workshops, ASSURE, DECSoS, ISSE, ReSA4CI, and SASSUR, 22-09-2015, Delft, Netherlands. doi: 10.1007/978-3-319-24249-1_30
Netkachova, K., Netkachov, O. & Bloomfield, R. E. (2015). Tool Support for Assurance Case Building Blocks, Providing a Helping Hand with CAE. In: Lecture Notes in Computer Science, Computer Safety Reliability and Security. SAFECOMP 2015 Workshops, ASSURE, DECSoS, ISSE, ReSA4CI, and SASSUR, 22-09-2015, Delft, Netherlands. doi: 10.1007/978-3-319-24249-1_6
Nikolopoulos, N., Violidakis, I., Karampinis, E. , Agraniotis, M., Bergins, C. & Panagiotis, G. (2015). Report on comparison among current industrial scale lignite drying technologies. Fuel, 155, pp. 86-114. doi: 10.1016/j.fuel.2015.03.065
Nouri, J. M. (2015). Influence of cavitation on near nozzle exit spray. Paper presented at the CAV 2015. 9th Int. Symp. On Cavitation, 6-10 Dec 2015, Lausanne, Switzerland.
Paniagua, P., Fonseca, J., Gylland, A. S. & Nordal, S. (2015). Microstructural study of the deformation zones during cone penetration in silt at variable penetration rates. Canadian Geotechnical Journal, 52(12), pp. 2088-2098. doi: 10.1139/cgj-2014-0498
Paniagua, P., Gylland, A. S., Nordal, S. & Fonseca, J. (2015). Microstructural study of the deformation zones around a penetrating coned tip in silty soil. In: Soga, K., Kumar, K., Biscontin, G. & Kuo, M. (Eds.), Geomechanics from Micro to Macro. (pp. 1593-1598). London, UK: CRC Press.
Papoulias, D. & Gavaises, M. (2015). Modelling of single bubble-dynamics and thermal effects. Journal of Physics: Conference Series, 656(1), article number 012098. doi: 10.1088/1742-6596/656/1/012098
Parra, J., Cattell, R., Etemad, S. & Pullen, K. R. (2015). Performance Measurements of a Low Specific Speed TurboClaw (R) Compressor. IOP Conference Series: Materials Science and Engineering, 90(1), article number 12050. doi: 10.1088/1757-899X/90/1/012050
Pelletier, J. D., Sherman, D. J., Ellis, J. T. , Farrell, E. J., Jackson, N. L., Li, B. Y., Nordstrom, K. F., Maia, L. P. & Omidyeganeh, M. (2015). Dynamics of sediment storage and release on aeolian dune slip faces: A field study in Jericoacoara, Brazil. Journal of Geophysical Research: Earth Surface, 120(9), pp. 1911-1934. doi: 10.1002/2015jf003636
Placidi, M. & Ganapathisubramani, B. (2015). Effects of frontal and plan solidities on aerodynamic parameters and the roughness sublayer in turbulent boundary layers. Journal of Fluid Mechanics, 782, pp. 541-566. doi: 10.1017/jfm.2015.552
Ponnusami, S. A., Turteltaub, S. & van der Zwaag, S. (2015). Cohesive-zone modelling of crack nucleation and propagation in particulate composites. Engineering Fracture Mechanics, 149, pp. 170-190. doi: 10.1016/j.engfracmech.2015.09.050
Rahman, B. M., Uthman, M., Quadir, A. , Grattan, K. T. V., Markides, C. & Themistos, C. (2015). Emergence of THz technologies and design and optimisation low-loss waveguides and devices. In: Electrical and Computer Engineering (ICECE), 2014 International Conference on. (pp. 389-393). IEEE. doi: 10.1109/ICECE.2014.7026819
Rahman, M. E. (2015). Integrated full vectorial FEM, FDTD and diffraction integrals in characterising visible light propagation through lossy biological media. (Unpublished Doctoral thesis, City, University of London)
Rahman, Md. Moktadir (2015). Development of an intelligent decision supporting home energy management system. (Unpublished Masters thesis, City University London)
Ramirez, Ciro Moreno (2015). Dynamic Analysis of Alternative Suspension Systems for Sport Motorcycles. (Unpublished Doctoral thesis, City University London)
Rane, S. (2015). Grid Generation and CFD Analysis of Variable Geometry Screw Machines. (Unpublished Doctoral thesis, City University London)
Read, M. G., Smith, I. K. & Stosic, N. (2015). Comparison of Organic Rankine Cycle Under Varying Conditions Using Turbine and Twin-Screw Expanders. In: Lemort, V, Quoilin, S, De Paepe, M & van de broek, M (Eds.), Proceedings of the 3rd International Seminar on ORC Power Systems. 3rd International Seminar on ORC Power Systems, 12-14 Oct 2015, Brussels, Belgium.
Read, M. G., Smith, I. K. & Stosic, N. (2015). Optimisation of two-stage screw expanders for waste heat recovery applications. IOP Conference Series: Materials Science and Engineering, 90(1), article number 012058. doi: 10.1088/1757-899x/90/1/012058
Read, M. G., Smith, R. & Pullen, K. R. (2015). Optimisation of flywheel energy storage systems with geared transmission for hybrid vehicles. Mechanism and Machine Theory, 87, pp. 191-209. doi: 10.1016/j.mechmachtheory.2014.11.001
Reid, B. A., Gavaises, M., Mitroglou, N. , Hargrave, G. K., Garner, C. P. & McDavid, R. M. (2015). String cavitation formation inside fuel injectors. Journal of Physics: Conference Series, 656(1), article number 012099. doi: 10.1088/1742-6596/656/1/012099
Reyes-Aldasoro, C. C., Barri, M. & Hafezparast, M. (2015). Automatic segmentation of focal adhesions from mouse embryonic fibroblasts. In: 2015 IEEE 12th International Symposium on Biomedical Imaging (ISBI). (pp. 548-551). IEEE. doi: 10.1109/ISBI.2015.7163932
Rockenbach, A., Mikulich, V., Bruecker, C. & Schnakenberg, U. (2015). Fluid transport via pneumatically actuated waves on a ciliated wall. Journal of Micromechanics and Microengineering, 25(12), article number 125009. doi: 10.1088/0960-1317/25/12/125009
Sajjad, A., Rajarajan, M. & Dimitrakos, T. (2015). A low-overhead secure communication framework for an inter-cloud environment. In: Al-Saidi, A., Fleischer, R., Maamar, Z. & Rana, O. (Eds.), Intelligent Cloud Computing. ICC 2014. International Conference on Intelligent Cloud Computing 2014, 24-02-2014 - 26-02-2014, Muscat, Oman.
Salemi, R., Koukouvinis, P., Strotos, G. , McDavid, R., Wang, L., Li, J., Marengo, M. & Gavaises, M. (2015). Evaluation of friction heating in cavitating high pressure Diesel injector nozzles. Journal of Physics: Conference Series, 656(1), article number 012083. doi: 10.1088/1742-6596/656/1/012083
Schembri, M., Farrugia, P., Wodehouse, A. J. , Grierson, H. & Kovacevic, A. (2015). Influence of sketch types on distributed design team work. CoDesign, 11(2), pp. 99-118. doi: 10.1080/15710882.2015.1054841
Schmitz, A., Ponitz, B., Brücker, C. , Schmitz, H., Herweg, J. & Bleckmann, H. (2015). Morphological properties of the last primaries, the tail feathers, and the alulae of Accipiter nisus, Columba livia, Falco peregrinus, and Falco tinnunculus. Journal of Morphology, 276(1), pp. 33-46. doi: 10.1002/jmor.20317
Scott, R.H., Banerji, P., Chikermane, S. , Surre, F., Sun, T. ORCID: 0000-0003-3861-8933 & Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (2015). Assessment of fibre optic strain gauges for field use in India. International Journal of Sustainable Materials and Structural Systems, 2(1/2), pp. 96-112. doi: 10.1504/ijsmss.2015.078368
Selimis, Vasileios (2015). Eye-tracking technology in vehicles: application and design. (Unpublished Masters thesis, City University London)
Shafqat, K., Ysehak Abay, T. ORCID: 0000-0002-9096-7551, Budidha, K. ORCID: 0000-0002-6329-8399 & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2015). Empirical Mode Decomposition of NIRS signals for assessment of cerebral and muscle thermoregulation
Shafqat, K., Langford, R. M. & Kyriacou, P. A. (2015). Estimation of instantaneous venous blood saturation using the Photoplethysmograph (PPG) waveform. Physiological Measurement, 36(10), pp. 2203-2214. doi: 10.1088/0967-3334/36/10/2203
Shen, X., Camara, A. & Ye, A. J. (2015). Effects of seismic devices on transverse responses of piers in the Sutong Bridge. Earthquake Engineering and Engineering Vibration, 14(4), pp. 611-623. doi: 10.1007/s11803-015-0049-7
Shittu, R., Healing, A., Ghanea-Hercock, R. , Bloomfield, R. E. & Rajarajan, M. (2015). Intrusion alert prioritisation and attack detection using post-correlation analysis. Computers & Security, 50, pp. 1-15. doi: 10.1016/j.cose.2014.12.003
Siesakul, B. T., Gkoktsi, K. & Giaralis, A. (2015). Compressive power spectrum sensing for vibration-based output-only system identification of structural systems in the presence of noise. Compressive Sensing IV, 9484, article number 94840K. doi: 10.1117/12.2177162
Sikora, I. (2015). Preparing Aviation Executives for the Future. Paper presented at the Flight Operational Forum 2015, 13 - 15 April, 2015, Oslo, Norway.
Sikora, I. (2015). Risk Assessment, Modelling And Proactive Safety Management System In Aviation: A Literature Review. Proceedings of Conference on Transportation Systems with International Participation,
Sikora, I. (2015). "A Tale of Two Industries" - Building the Bridge Between Business Aviation and Academia. Paper presented at the 5th Annual EBASCON, 24-25 Feb 2015, Frankfurt, Germany.
Sivchenko, D., Rakocevic, V. & Habermann, J. (2015). Integrated mobility and resource management for cross-network resource sharing in heterogeneous wireless networks using traffic offload policies. Wireless Networks, 21(3), pp. 981-999. doi: 10.1007/s11276-014-0826-7
Skillen, A., Revell, A., Pinelli, A. , Piomelli, U. & Favier, J. (2015). Flow over a Wing with Leading-Edge Undulations. AIAA Journal, 53(2), pp. 464-472. doi: 10.2514/1.j053142
Slabaugh, G. G. & Reyes-Aldasoro, C. C. (2015). Guest Editorial: Medical Image Understanding and Analysis. Annals of the British Machine Vision Association, 2015(1), pp. 1-2.
Soudi, Sasan (2015). Optimization of silicon photonic devices for polarization diversity applications. (Unpublished Doctoral thesis, City University London)
Stallebrass, S. E., Phillips, N.S., Goodey, R.J. & Jefferis, S.A. (2015). Mechanisms for the disaggregation of soil cuttings in slurries. In: Proceedings of the XVI European Conference on Soil Mechanics and Geotechnical Engineering. Proceedings of the XVI European Conference on Soil Mechanics and Geotechnical Engineering
Strotos, G., Koukouvinis, P., Theodorakakos, A. , Gavaises, M. & Bergeles, G. (2015). Transient heating effects in high pressure Diesel injector nozzles. International Journal of Heat and Fluid Flow, 51, pp. 257-267. doi: 10.1016/j.ijheatfluidflow.2014.10.010
Sun, T., Wren, S., Nguyen, H. & Grattan, K. T. V. (2015). A suite of optical fibre-based chemical sensors for environmental monitoring. In: ICOCN 2015 - 14th International Conference on Optical Communications and Networks, Proceedings. 2015 14th International Conference on Optical Communications and Networks (ICOCN), 3-5 Jul 2015, Nanjing, China.
Sun, Z. (2015). Micro Vortex Generators for Boundary Layer Control: Principles and Applications. International Journal of Flow Control, 7(1-2), pp. 67-86. doi: 10.1260/1756-8250.7.1-2.67
Takeishi, K., Kawahara, G., Wakabayashi, H. , Uhlmann, M. & Pinelli, A. (2015). Localized turbulence structures in transitional rectangular-duct flow. Journal of Fluid Mechanics, 782, pp. 368-379. doi: 10.1017/jfm.2015.546
Thotath, B., Nguyen, T.H., Zhang, W. H. , Baxter, G., Sun, T., Collins, S. & Grattan, K. T. V. (2015). Intrinsic determination of pH using a barycentre algorithm to characterise fluorescence from an optical fibre sensor. Paper presented at the Australian and New Zealand Conference on Optics and Photonics 2015 (ANZCOP 2015), 29 Nov - 3 Dec 2015, Adelaide, Australia.
Trozzi, V., Gentile, G., Kaparias, I. & Bell, M. G. H. (2015). Effects of countdown displays in public transport route choice under severe overcrowding. Networks and Spatial Economics, 15(3), pp. 823-842. doi: 10.1007/s11067-013-9207-5
Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 (2015). Applications of topology optimization in structural engineering: High-rise buildings and steel components. Jordan Journal of Civil Engineering, 9(3), pp. 335-357. doi: 10.14525/jjce.9.3.3076
Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 & Galiatsatos, G. (2015). Assessment of cellular beams with transverse stiffeners and closely spaced web openings. Thin-Walled Structures, 94, pp. 636-650. doi: 10.1016/j.tws.2015.05.005
Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979, Kingman, J. J. & Toropov, V. V. (2015). Application of structural topology optimisation to perforated steel beams. Computers & Structures, 158, pp. 108-123. doi: 10.1016/j.compstruc.2015.05.004
Valero-Lara, P., Igual, F. D., Prieto-Matias, M. , Pinelli, A. & Favier, J. (2015). Accelerating fluid-solid simulations (Lattice-Boltzmann & Immersed-Boundary) on heterogeneous architectures. International Journal of Computational Science and Engineering (IJCSE), 10, pp. 249-261. doi: 10.1016/j.jocs.2015.07.002
Viphavakit, C., Komodromos, M., Themistos, C. , Mohammed, W. S., Kalli, K. & Rahman, B. M. (2015). Optimization of a horizontal slot waveguide biosensor to detect DNA hybridization. Applied Optics, 54(15), pp. 4881-4888. doi: 10.1364/ao.54.004881
Virdi, A. S., Zhang, Q., He, L. , Li, H. D. & Hunsleys, R. (2015). Aerothermal Performance of Shroudless Turbine Blade Tips with Relative Casing Movement Effects. Journal of Propulsion and Power, 31(2), pp. 527-536. doi: 10.2514/1.b35331
Vogiatzaki, K., Navarro-Martinez, S., De, S. & Kronenburg, A. (2015). Mixing modelling framework based on Multiple Mapping Conditioning for the prediction of turbulent flame extinction. Flow, Turbulence and Combustion, 95(2-3), pp. 501-517. doi: 10.1007/s10494-015-9626-0
Wang, J. & Ma, Q. (2015). Numerical techniques on improving computational efficiency of spectral boundary integral method. International Journal for Numerical Methods in Engineering, 102(10), pp. 1638-1669. doi: 10.1002/nme.4857
Wang, J., Yan, S. & Ma, Q. (2015). An improved technique to generate rogue waves in random sea. CMES - Computer Modeling in Engineering and Sciences, 106(4), pp. 263-289.
Wang, Z., Zhang, Q., Liu, Y. & He, L. (2015). Impact of Cooling Injection on the Transonic Over-Tip Leakage Flow and Squealer Aerothermal Design Optimization. Journal of Engineering for Gas Turbines and Power, 137(6), article number 062603. doi: 10.1115/1.4029120
White, M. ORCID: 0000-0002-7744-1993 (2015). The design and analysis of radial inflow turbines implemented within low temperature organic Rankine cycles. (Unpublished Doctoral thesis, City University London)
White, M. ORCID: 0000-0002-7744-1993 & Sayma, A. I. (2015). The Application of Similitude Theory for the Performance Prediction of Radial Turbines Within Small-Scale Low-Temperature Organic Rankine Cycles. Journal of Engineering for Gas Turbines and Power, 137(12), pp. 1-10. doi: 10.1115/1.4030836
White, M. ORCID: 0000-0002-7744-1993 & Sayma, A. I. (2015). System and component modelling and optimisation for an efficient 10 kWe low-temperature organic Rankine cycle utilising a radial inflow expander. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 229(7), pp. 795-809. doi: 10.1177/0957650915574211
White, M. ORCID: 0000-0002-7744-1993 & Sayma, A. I. (2015). The impact of component performance on the overall cycle performance of small-scale low temperature organic Rankine cycles. IOP Conference Series: Materials Science and Engineering, 90(1), article number 012063. doi: 10.1088/1757-899x/90/1/012063
White, M. ORCID: 0000-0002-7744-1993 & Sayma, A. I. (2015). The one-dimensional meanline design of radial turbines for small scale low temperature organic rankine cycles. In: ASME Turbo Expo 2015: Turbine Technical Conference and Exposition. ASME Turbo Expo 2015: Turbine Technical Conference and Exposition, 15-19 Jun 2015, Montreal, Canada. doi: 10.1115/GT2015-42466
Wren, S., Sun, T. & Grattan, K. T. V. (2015). A Fluorescent Optical Fibre Chemosensor for Mercury Detection. 24th International Conference on Optical Fibre Sensors, 9634, article number 96346C. doi: 10.1117/12.2194588
Wren, S. P., Piletsky, S. A., Karim, K. , Gascoine, P., Lacey, R., Sun, T. & Grattan, K. T. V. (2015). Computational Design and Fabrication of Optical Fibre Fluorescent Chemical Probes for the Detection of Cocaine. Journal of Lightwave Technology, 33(12), pp. 2572-2579. doi: 10.1109/jlt.2015.2389036
Xu, G., Yan, S. & Ma, Q. (2015). Modified SFDI for fully nonlinear wave simulation. CMES - Computer Modeling in Engineering and Sciences, 106(1), pp. 1-35. doi: 10.3970/cmes.2015.106.001
Xu, Q., Gong, P., Chen, T. , Michael, J. & Li, S. (2015). Modelling and characterization of NAND flash memory channels. Measurement, 70, pp. 225-231. doi: 10.1016/j.measurement.2015.04.003
Xu, S. J., Han, D. F. & Ma, Q. (2015). Hydrodynamic forces and moments acting on a remotely operate vehicle with an asymmetric shape moving in a vertical plane. European Journal of Mechanics - B/Fluids, 54, pp. 1-9. doi: 10.1016/j.euromechflu.2015.05.007
Yan, S., Ma, Q., Sriram, V. , Qian, L., Ferrer, P. J. M. & Schlurmann, T. (2015). Numerical and experimental studies of moving cylinder in uni-directional focusing waves. In: Proceedings of the International Offshore and Polar Engineering Conference. The Twenty-fifth International Ocean and Polar Engineering Conference, 21-26 Jun 2015, Hawaii, USA. doi: ISOPE-I-15-051
Yang, Y-F., Zhang, Z-C. & Fu, F. ORCID: 0000-0002-9176-8159 (2015). Experimental and numerical study on square RACFST members under lateral impact loading. Journal of Constructional Steel Research, 111, pp. 43-56. doi: 10.1016/j.jcsr.2015.04.004
Yang, Y., Wang, Y., Fu, F. & Liu, J. (2015). Static behavior of T-shaped concrete-filled steel tubular columns subjected to concentric and eccentric compressive loads. Thin-Walled Structures, 95, pp. 374-388. doi: 10.1016/j.tws.2015.07.009
Yao, S., Chen, S., Pal, A. , Bremer, K., Guan, B. O., Sun, T. & Grattan, K. T. V. (2015). Compact Tm-doped fibre laser pumped by a 1600 nm Er-doped fibre laser designed for environmental gas sensing. Sensors and Actuators A Physical, 226(May), pp. 11-20. doi: 10.1016/j.sna.2015.02.019
Yazdani Nezhad, H. ORCID: 0000-0003-0832-3579, Auffray, A., McCarthy, C. T. & O'Higgins, R. (2015). Impact damage response of carbon fibre-reinforced aerospace composite panels. In: ICCM International Conferences on Composite Materials. 20th International Conference on Composite Materials, 19-24 Jul 2015, Copenhagen, Denmark.
Yazdani Nezhad, H. ORCID: 0000-0003-0832-3579 & O'Dowd, N. P. (2015). Creep relaxation in the presence of residual stress. Engineering Fracture Mechanics, 138, pp. 250-264. doi: 10.1016/j.engfracmech.2015.03.037
Yiallouras, C. (2015). Design of a 2D MRI compatible robot for performing prostate cancer treatment using therapeutic ultrasound. (Unpublished Doctoral thesis, City University London)
Ysehak Abay, T., Budidha, K. & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2015). Assessment of Blood Flow, Blood Volume and Haemoglobin concentrations by Photoplethysmography during induced hypothermia
Zhao, S., Shmaliy, Y. S., Khan, S. & Liu, F. (2015). Improving state estimates over finite data using optimal FIR filtering with embedded unbiasedness. 2015 23rd European Signal Processing Conference (EUSIPCO), pp. 2177-2180. doi: 10.1109/eusipco.2015.7362770
Zhao, S., Shmaliy, Y. S., Liu, F. , Ibarra-Manzano, O. & Khan, S. (2015). Effect of embedded unbiasedness on discrete-time optimal FIR filtering estimates. EURASIP Journal on Advances in Signal Processing, 2015(1), article number 83. doi: 10.1186/s13634-015-0268-0
Zhou, B., Yang, S., Sun, T. & Grattan, K. T. V. (2015). A Novel Wireless Mobile Platform to Locate and Gather Data From Optical Fiber Sensors Integrated Into a WSN. IEEE Sensors Journal, 15(6), pp. 3615-3621. doi: 10.1109/jsen.2015.2396040
2014
Abay, T. & Kyriacou, P. A. (2014). Investigation of Photoplethysmography and Near Infrared Spectroscopy for the Assessment of Tissue Blood Perfusion. 2014 36th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), 2014, pp. 5361-5364. doi: 10.1109/embc.2014.6944837
Abay, T. & Kyriacou, P. A. (2014). Investigation of photoplethysmography and Near Infrared Spectroscopy for the assessment of tissue blood perfusion. Paper presented at the 36th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBC 2014, 26-08-2014 - 30-08-2014, Chicago, USA. doi: 10.1109/EMBC.2014.6944837
Abdelmalik, A. A., Dodd, S. J., Dissado, L. A. , Chalashkanov, N. M. & Fothergill, J. (2014). Charge transport in thermally aged paper impregnated with natural ester oil. IEEE Transactions on Dielectrics and Electrical Insulation, 21(5), pp. 2318-2328. doi: 10.1109/tdei.2014.004316
Adamsky, F., Khayam, S. A., Jaeger, R. & Rajarajan, M. (2014). Stealing bandwidth from BitTorrent seeders. Computers & Security, 46, pp. 126-140. doi: 10.1016/j.cose.2014.07.009
Adamsky, F., Khayam, S. A., Jager, R. & Rajarajan, M. (2014). Who is going to be the next BitTorrent Peer Idol?. Paper presented at the 12th IEEE International Conference on Embedded and Ubiquitous Computing, 26-08-2014 - 28-08-2014, Milan, Italy.
Adnan, M., Rosi, L., Veluru, S. , Mouseli, M., Longley, P. A. & Rajarajan, M. (2014). Using Digital Traces for User Profiling: the Uncertainty of Identity Toolset. Paper presented at the ACM Security in Information and Networks, (SIN 2014), 09-09-2014 - 11-09-2014, Glasgow, UK.
Agrawal, A., Oates, A. & Cabrera-Espana, F. (2014). Fabrication and characterisation of Si micropillar PV structures. Materials Research Innovations, 18(7), pp. 500-504. doi: 10.1179/1433075x14y.0000000244
Ahmad, A.H., Naher, S. & Brabazon, D. (2014). Injection tests and effect on microstructure and properties of aluminium 7075 direct thermal method feedstock billets. Key Engineering Materials, 611-61, pp. 1637-1644. doi: 10.4028/www.scientific.net/kem.611-612.1637
Ahmad, A.H., Naher, S. & Brabazon, D. (2014). The effect of direct thermal method, temperature and time on microstructure of a cast aluminum alloy. Materials and Manufacturing Processes, 29(2), pp. 134-139. doi: 10.1080/10426914.2013.822980
Alzahrani, F. M., Sanusi, Y. S., Vogiatzaki, K. , Ghoniem, A. F., Habib, M. A. & Mokheimer, E. M. A. (2014). Evaluation of the Accuracy of Selected Syngas Chemical Mechanisms. Journal of Energy Resources Technology, 137(4), article number 042201. doi: 10.1115/1.4029860
Ams, M., Pal, A., Williams, R.J. , Sen, R., Withford, M.J., Sun, T. & Grattan, K. T. V. (2014). Fibre Bragg Grating Sensors for Radiation Insensitive Measurements. Paper presented at the OECC/ACOFT 2014, 06-07-2014 - 10-07-2014, Melbourne, Australia.
Apostolopoulou, D. ORCID: 0000-0002-9012-9910, Sauer, P. W. & Dominguez-Garcia, A. D. (2014). Automatic Generation Control and its Implementation in Real Time. Paper presented at the 47th Hawaii International Conference on System Sciences (HICSS), 6-9 Jan 2014, Hawaii, USA. doi: 10.1109/HICSS.2014.307
Aristovich, E. (2014). Non-invasive Measurement of Cholesterol in Human Blood by Impedance Technique: an Investigation by Finite Element Field Modelling. (Unpublished Doctoral thesis, City University London)
Arjeneh, M., Kovacevic, A. ORCID: 0000-0002-8732-2242, Stosic, N. & Gavaises, M. ORCID: 0000-0003-0874-8534 (2014). Study of Multiphase Flow at the Suction of Screw Compressor. In: http://docs.lib.purdue.edu/icec/2319. 22nd International Compressor Engineering Conference at Purdue 2014, 14 - 17 July 2014, West Lafayette, Indiana.
Arunkumar, S., Srivatsa, M. & Rajarajan, M. (2014). Location Security - Where to Enforce?. Paper presented at the IEEE MILCOM, 06-10-2014 - 08-10-2014, Baltimore, USA.
Asif, W., Qureshi, A., Iqbal, M. & Rajarajan, M. (2014). On the Complexity of Average Path length for Biological Networks and Patterns. International Journal of Biomathematics, 07(04), article number 1450038. doi: 10.1142/s1793524514500387
Asif, W., Qureshi, M., Lestas, M. & Rajarajan, M. (2014). CBDI: Combined Banzhaf & Diversity Index for Finding Critical Nodes. Paper presented at the IEEE Globecom, 08-12-2014 - 12-12-2014, Texas, USA.
Atkin, C.J. (2014). Convergence of calculated transition loci during computational analysis of transonic aerofoils and infinite swept wings. Paper presented at the 29th Congress of the International Council of the Aeronautical Sciences, ICAS 2014, 7-12 Sep 2014, St Petersburg, Russia.
Bai, Y., Khoylou, A., Debs, M. , Shi, S., Fabian, M., Sun, T., Grattan, K. T. V. & McKinnon, B. (2014). Dielectric Properties and Numerical Modelling of Microwave Heating of Portland Cement/Fly Ash Blends. Paper presented at the 34th Cement and Concrete Science Conference, 14-16 Sep 2014, Sheffield, UK.
Bai, Y., Shi, S., Fabian, M. , Arms, M, Sun, T, Grattan, K. T. V., Li, H., Xu, D.L. & Basheer, P.A.M. (2014). Microwave Curing Techniques for Manufacturing Alkali-activated Fly Ash. Paper presented at the 34th Annual Cement and Concrete Science Conference, 14-16 Sep 2014, Sheffield, UK.
Banerjee, J. R. & Kennedy, D. (2014). Dynamic stiffness method for inplane free vibration of rotating beams including Coriolis effects. Journal of Sound and Vibration, 333(26), pp. 7299-7312. doi: 10.1016/j.jsv.2014.08.019
Banerjee, J. R., Liu, X. & Kassem, H. I. (2014). Aeroelastic stability analysis of high aspect ratio aircraft wings. Journal of Applied Nonlinear Dynamics, 3(4), pp. 413-422. doi: 10.5890/jand.2014.12.012
Bauer, K. & Bruecker, C. (2014). Behavior of oscillatory tube flow at liquid-gas interfaces. Physics of Fluids, 26(7), article number 072106. doi: 10.1063/1.4890717
Blazakis, K. N., Reyes-Aldasoro, C. C., Styles, V. , Venkataraman, C. & Madzvamuse, A. (2014). An optimal control approach to cell tracking. Paper presented at the Inverse Problems from Theory to Applications Conference (IPTA2014), 26-08-2014 - 28-08-2014, Bristol, UK.
Blonde, R., Jimenez-Melero, E., Ponnusami, S. A. , Zhao, L., Schell, N., Bruck, E., van der Zwaag, S. & van Dijk, N. (2014). Position-dependent shear-induced austenite-martensite transformation in double-notched TRIP and dual-phase steel samples. Journal Of Applied Crystallography, 47(3), pp. 956-964. doi: 10.1107/s1600576714006712
Boscolo, M. & Banerjee, J. R. (2014). Layer-wise dynamic stiffness solution for free vibration analysis of laminated composite plates. Journal of Sound and Vibration, 333(1), pp. 200-227. doi: 10.1016/j.jsv.2013.08.031
Bowyer, S., Kanthou, C. & Reyes-Aldasoro, C. C. (2014). Analysis of capillary-like structures formed by endothelial cells in a novel organotypic assay developed from heart tissue. In: Reyes-Aldasoro, C. C. & Slabaugh, G. G. (Eds.), Medical Image Understanding and Analysis 2014. (pp. 235-240). London: British Machine Vision Association.
Bremer, K., Meinhardt-Wollweber, M., Thiel, T. , Werner, G., Sun, T., Grattan, K. T. V. & Roth, B. (2014). Sewerage tunnel leakage detection using a fibre optic moisture-detecting sensor system. Sensors and Actuators A: Physical, 220, pp. 62-68. doi: 10.1016/j.sna.2014.09.018
Bremer, K., Wollweber, M., Guenther, S. , Werner, G., Sun, T., Grattan, K. T. V. & Roth, B. (2014). Fibre optic humidity sensor designed for highly alkaline environments. Proceedings of SPIE - The International Society for Optical Engineering, 9157, article number 9157A4. doi: 10.1117/12.2059637
Brücker, C. & Weidner, C. (2014). Influence of self-adaptive hairy flaps on the stall delay of an airfoil in ramp-up motion. Journal of Fluids and Structures, 47, pp. 31-40. doi: 10.1016/j.jfluidstructs.2014.02.014
Budidha, K. ORCID: 0000-0002-6329-8399, Njoum, H. & Kyriacou, P. A. ORCID: 0000-0002-2868-485X (2014). Investigation of pulse transit times using multi-site reflectance photoplethysmography under conditions of artificially induced peripheral vasoconstriction. Paper presented at the 7th World Congress of Biomechanics (WCB 2014), 7 Jul 2014, Boston, USA.
Budidha, K. & Kyriacou, P. A. (2014). Investigation of Pulse Transit Times utilizing multisite reflectance photoplethysmography under conditions of artificially induced peripheral vasoconstriction. 2014 36th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), pp. 1965-1968. doi: 10.1109/EMBC.2014.6943998
Budidha, K. & Kyriacou, P. A. (2014). The human ear canal: investigation of its suitability for monitoring photoplethysmographs and arterial oxygen saturation. Physiological Measurement, 35(2), pp. 111-128. doi: 10.1088/0967-3334/35/2/111
Camara, A. & Astiz, M. A. (2014). Analysis and Control of Cable-Stayed Bridges Subject to Seismic Action. Structural Engineering International, 24(1), pp. 27-36. doi: 10.2749/101686614x13830790993762
Camara, A., Astiz, M. A. & Ye, A. J. (2014). Fundamental mode estimation for modern cable-stayed bridges considering the tower flexibility. Journal of Bridge Engineering, 19(6), article number 4014015. doi: 10.1061/(asce)be.1943-5592.0000585
Camara, A., Nguyen, K., Ruiz-Teran, A. M. & Stafford, P. J. (2014). Serviceability limit state of vibrations in under-deck cable-stayed bridges accounting for vehicle-structure interaction. Engineering Structures, 61, pp. 61-72. doi: 10.1016/j.engstruct.2013.12.030
Cao, J., Sun, T. & Grattan, K. T. V. (2014). Gold nanorod-based localized surface plasmon resonance biosensors: A review. Sensors and Actuators, B: Chemical, 195(May), pp. 332-351. doi: 10.1016/j.snb.2014.01.056
Chalashkanov, N. M., Dodd, S. J., Dissado, L. A. & Fothergill, J. (2014). Re-examination of the dielectric spectra of epoxy resins: Bulk charge transport and interfacial polarization peaks. IEEE Transactions on Dielectrics and Electrical Insulation, 21(3), pp. 1330-1341. doi: 10.1109/tdei.2014.6832281
Chan Yau Chung, John (2014). A novel electric power quality monitoring system for transient analysis. (Unpublished Doctoral thesis, City University London)
Chen, R., Zhao, T., Wu, W. , Wu, F., Li, L., Qian, J., Xu, R., Wu, H., Albishri, H. M., Al-Bogami, A. S., El-Hady, D. A., Lu, J. & Amine, K. (2014). Free-Standing Hierarchically Sandwich-Type Tungsten Disulfide Nanotubes/Graphene Anode for Lithium-Ion Batteries. Nano Letters, 14(10), pp. 5899-5904. doi: 10.1021/nl502848z
Christou, D., Karcanias, N. & Mitrouli, M. (2014). Matrix representation of the shifting operation and numerical properties of the ERES method for computing the greatest common divisor of sets of many polynomials. Journal of Computational and Applied Mathematics, 260, pp. 54-67. doi: 10.1016/j.cam.2013.09.021
Constantinou, L., Triantis, I., Bayford, R. & Demosthenous, A. (2014). High-power CMOS current driver with accurate transconductance for electrical impedance tomography. IEEE Transactions on Biomedical Circuits and Systems, 8(4), pp. 575-583. doi: 10.1109/tbcas.2013.2285481
Das, N., Chatterjee, S. ORCID: 0000-0002-7735-6123, Kumar, S. , Pradhan, A., Panigrahi, P., Vitkin, I. A. & Ghosh, N. (2014). Tissue multifractality and Born approximation in analysis of light scattering: a novel approach for precancers detection. Scientific Reports, 4(1), article number 6129. doi: 10.1038/srep06129
Dayyabu, Danraka (2014). Analysis of aircraft accidents and effects on aviation industry in Nigeria. (Unpublished Masters thesis, City University London)
Dell’Amico, M., Hadjidimitriou, S. & Kaparias, I. (2014). A descriptive study on public transport user behaviour from Live Bus Arrivals. Paper presented at the 2nd Conference on Sustainable Urban Mobility, 05-05-2014 - 06-05-2014, Volos, Greece.
Divall, S., Goodey, R.J. & Taylor, R.N. (2014). The influence of a time delay between sequential tunnel constructions. Paper presented at the 8th International Conference on Physical Modelling in Geotechnics, 14-01-2014 - 17-01-2014, Perth, WA.
Estelles Martinez, S. & Tomas-Rodriguez, M. (2014). Seguimiento de trayectorias tridimensionales de un quadrotor mediante control PVA. Revista Iberoamericana de Automática e Informática Industrial, 11(1), pp. 54-67. doi: 10.1016/j.riai.2013.11.004
Fahad, L. G., Tahir, S. F. & Rajarajan, M. (2014). Activity Recognition in Smart Homes using Clustering based Classification. Paper presented at the 22nd International Conference on Pattern Recognition (ICPR), 24-08-2014 - 28-08-2014, Stockholm, Sweden.
Favier, J., Revell, A. & Pinelli, A. (2014). A Lattice Boltzmann-Immersed Boundary method to simulate the fluid interaction with moving and slender flexible objects. Journal of Computational Physics, 261, pp. 145-161. doi: 10.1016/j.jcp.2013.12.052
Fiaz, M., Yousaf, R., Hanfi, M. , Asif, W., Qureshi, H. K. & Rajarajan, M. (2014). Adding the reliability on tree based topology construction algorithms for wireless sensor networks. Wireless Personal Communications, 74(2), pp. 989-1004. doi: 10.1007/s11277-013-1334-2
Fonseca, J., Karatza, Z., Bésuelle, P. & Viggiani, G. (2014). An experimental investigation on the deformation of Fontainebleau sandstone. Paper presented at the 16th International Conference on Experimental Mechanics, 07-07-2014 - 11-07-2014, Cambridge, UK.
Fonseca, J., Sim, W., Shire, T. & O'Sullivan, C. (2014). Microstructural analysis of sands with varying degrees of internal stability. Geotechnique, 64(5), pp. 405-411. doi: 10.1680/geot.13.t.014
Fothergill, J. (2014). The coming of Age of HVDC extruded power cables. In: Electrical Insulation Conference (EIC), 2014. (pp. 124-137). IEEE. doi: 10.1109/EIC.2014.6869361
Gkoktsi, K. & Giaralis, A. (2014). On the influence of frequency selectivity of wavelet bases for relative wavelet entropy-based structural damage localization. In: Rodellar, J, Guemes, A & Pozo, F (Eds.), Sixth World Conference on Structural Control and Monitoring. 6th World Conference on Structural Control and Monitoring, 15-07-2014 - 17-07-2014, Barcelona, Spain.
Gong, P., Xu, Q. & Chen, T. (2014). Energy Harvesting Aware routing protocol for wireless sensor networks. 2014 9th International Symposium on Communication Systems, Networks and Digital Signal Processing (CSNDSP), pp. 171-176. doi: 10.1109/CSNDSP.2014.6923819
Gorasia, Rohit J., McNamara, A. M., Bell, A. & Suckling, T. (2014). Forces involved with the extraction of casings used in rotary bored piling. Paper presented at the 8th International Conference on Physical Modelling in Geotechnics 2014 (ICPMG2014), 14th - 17th Janurary 2014, Perth, Australia.
Gourlay, C. M., O'Sullivan, C., Fonseca, J. , Yuan, L., Kareh, K., Nagira, T. & Yasuda, H. (2014). Synchrotron radiography studies of shear-induced dilation in semi-solid Al alloys and steels. JOM: Journal of the Minerals, Metals and Materials Society, 66(8), pp. 1415-1424. doi: 10.1007/s11837-014-1029-5
Gowree, E. R. & Atkin, C. J. (2014). Incompressible turbulent flow at the leading edge of swept wings. In: 29th Congress of the International Council of the Aeronautical Sciences, ICAS 2014. 29th Congress of the International Council of the Aeronautical Sciences, 7-12 Sep 2014, St Petersburg, Russia.
Gruber, J. K., Jahromizadeh, S., Prodanovic, M. & Rakocevic, V. (2014). Application-oriented modelling of domestic energy demand. International Journal of Electrical Power & Energy Systems, 61, pp. 656-664. doi: 10.1016/j.ijepes.2014.04.008
Guzmán-Iñigo, J. ORCID: 0000-0002-1833-6034, Sipp, D. & Schmid, P. J. (2014). A dynamic observer to capture and control perturbation energy in noise amplifiers. Journal of Fluid Mechanics, 758, pp. 728-753. doi: 10.1017/jfm.2014.553
Halikias, G. (2014). Strong stability and the Cayley transform. Mathematical Methods in the Applied Sciences, 37(2), pp. 212-216. doi: 10.1002/mma.2976
Jahromizadeh, S. & Rakocevic, V. (2014). Joint rate control and scheduling for providing bounded delay with high efficiency in multihop wireless networks. IEEE/ACM Transactions on Networking, 22(5), pp. 1686-1698. doi: 10.1109/TNET.2013.2282872
Javdani, S., Fabian, M., Ams, M. , Carlton, J., Sun, T. & Grattan, K. T. V. (2014). Fiber bragg grating-based system for 2-D analysis of vibrational modes of a steel propeller blade. Journal of Lightwave Technology, 32(23), pp. 4593-4599. doi: 10.1109/jlt.2014.2361631
Jones, W. P., Marquis, A. J. & Vogiatzaki, K. (2014). Large-eddy simulation of spray combustion in a gas turbine combustor. Combustion and Flame, 161(1), pp. 222-239. doi: 10.1016/j.combustflame.2013.07.016
Kamps, L., Hegner, F., Hess, D. & Bruecker, C. ORCID: 0000-0001-5834-3020 (2014). Volumetric velocimetry study in a transitional wall jet flow with passive flow control via flaps. In: Proc. 15th International symposium on applications of laser techniques to fluid mechanics. 17th International Symposium on Applications of Laser and Imaging Techniques to Fluid Mechanics, 7-10 July 2014, Lisbon, Portugal.
Kanthou, C., Dachs, G. U., Lefley, D. V. , Steele, A. J., Coralli-Foxon, C., Harris, S., Greco, O., Dos Santos, S. A., Reyes-Aldasoro, C. C., English, W. R. & Tozer, G. M. (2014). Tumour cells expressing single VEGF isoforms display distinct growth, survival and migration characteristics. PLoS One, 9(8), article number e104015. doi: 10.1371/journal.pone.0104015
Kaparias, I., Bell, M. G. H., Biagioli, T. , Bellezza, L. & Mount, B. (2014). Behavioural analysis of vehicle-pedestrian interactions: The case of street designs with elements of shared space. Paper presented at the 93rd Annual Meeting of the Transportation Research Board, 12-01-2014 - 16-01-2014, Washington, DC, USA.
Kappos, A. J., Papadopoulos, I. & Tokatlidis, A. (2014). Design of a Seismically Isolated Railway Viaduct over Axios River in Northern Greece. Paper presented at the Second International Conference on Railway Technology: Research, Development and Maintenance, 8-11 April 2014, Ajaccio, Corsica.
Karathanassis, I. K., Papanicolaou, E., Belessiotis, V. & Bergeles, G. (2014). Flow and Temperature Fields in Cooling Devices with Embedded Serpentine Tubes. Numerical Heat Transfer, Part A: Applications, 66(4), pp. 349-378. doi: 10.1080/10407782.2014.884864
Karcanias, N., Leventides, J. & Livada, M. (2014). Matrix pencil representation of structural transformations of passive electrical networks. 6th International Symposium on Communications, Control and Signal Processing (ISCCSP), 1 2, pp. 416-420. doi: 10.1109/isccsp.2014.6877902
Karcanias, N., Leventides, J. & Livada, M. (2014). Multi-parameter structural transformations of passive electrical networks and natural frequency assignment. In: 22nd Mediterranean Conference of Control and Automation (MED). (pp. 984-989). IEEE. doi: 10.1109/MED.2014.6961502
Karim, M.R, Rahman, B. M. & Agrawal, G. P. (2014). Dispersion engineered Ge11.5As24Se64.5 nanowire for supercontinuum generation: A parametric study. Optics Express, 22(25), pp. 31029-31040. doi: 10.1364/oe.22.031029
Karimi, Mohammad (2014). Experimental and theoretical analysis of polarization-maintaining fibre for sensing applications. (Unpublished Doctoral thesis, City University London)
Kassanos, P., Constantinou, L., Triantis, I. & Demosthenous, A. (2014). An Integrated Analog Readout for Multi-Frequency Bioimpedance Measurements. IEEE Sensors Journal, 14(8), pp. 2792-2800. doi: 10.1109/jsen.2014.2315963
Kirmse, C. & Brücker, C. (2014). On the jet formation through a leaky glottis. Journal of Fluids and Structures, 50, pp. 137-152. doi: 10.1016/j.jfluidstructs.2014.06.022
Koukouvinis, P., Bergeles, G. & Gavaises, M. (2014). A new methodology for estimating cavitation erosion: Application on a high speed cavitation test RIG. In: 11th World Congress on Computational Mechanics, WCCM 2014, 5th European Conference on Computational Mechanics, ECCM 2014 and 6th European Conference on Computational Fluid Dynamics, ECFD 2014. 11th World Congress on Computational Mechanics (WCCM XI), 20-25 Jul 2014, Barcelona, Spain.
Kouris, L.A.S. & Kappos, A. J. (2014). A practice-oriented model for pushover analysis of a class of timber-framed masonry buildings. Engineering Structures, 75, pp. 489-506. doi: 10.1016/j.engstruct.2014.06.012
Kouris, L.A.S., Meireles, H., Bento, R. & Kappos, A. J. (2014). Simple and complex modelling of timber-framed masonry walls in Pombalino buildings. Bulletin of Earthquake Engineering, 12(4), pp. 1777-1803. doi: 10.1007/s10518-014-9586-0
Kovacevic, A., Stosic, N., Jiang, Y. , Furmanczyk, M. & Lowry, S. (2014). Influence of approaches in CFD Solvers on Performance Prediction in Screw Compressors. In: http://docs.lib.purdue.edu/icec/2252. 22nd International Compressor Engineering Conference, 14-17 Jul 2014, West Lafayette, USA.
Kovacevic, A. & Udo, N. (2014). Fluid Machine - Bearing Inserts. Kovacevic,A., Udo, N. patent no. US 2014/0322059 A1
Kyriacou, P. A. & Phillips, J. P. (2014). Comparison of methods for determining pulse arrival time from Doppler and photoplethysmography signals. In: 36th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC). 36th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), 26-30th August 3014, Chicago. doi: 10.1109/EMBC.2014.6944453
Lee, W. C., Hung, F. H., Tsang, K. F. , Tung, H. C., Lau, W. H., Rakocevic, V. & Lai, L. (2014). A speedy cardiovascular diseases classifier using multiple criteria decision analysis. Sensors, 15(1), pp. 1312-1320. doi: 10.3390/s150101312
Leventides, J., Karcanias, N., Meintanis, I. & Milonidis, E. (2014). Reduced sensitivity solutions to global linearisation of the pole assignment map. Proceedings of the 19th IFAC World Congress, 2014, 19, pp. 4727-4732. doi: 10.3182/20140824-6-ZA-1003.02389
Leventides, J., Meintanis, I. & Karcanias, N. (2014). A quasi-Newton optimal method for the global linearisation of the output feedback pole assignment. In: 22nd Mediterranean Conference of Control and Automation (MED). (pp. 157-163). IEEE. doi: 10.1109/MED.2014.6961364
Leventides, J., Petroulakis, G. & Karcanias, N. (2014). The approximate Determinantal Assignment Problem. Linear Algebra and its Applications, 461, pp. 139-162. doi: 10.1016/j.laa.2014.07.008
Li, F., Rahulamathavan, Y. & Rajarajan, M. (2014). LSD-ABAC: Lightweight Static and Dynamic Attributes Based Access Control Scheme for Secure Data Access in Mobile Environment. 2014 IEEE 39th Conference on Local Computer Networks (LCN), 6632, pp. 354-361. doi: 10.1109/lcn.2014.6925791
Li, F., Rahulamathavan, Y. & Rajarajan, M. (2014). Lightweight Static and Dynamic Attributes Based Access Control Scheme for Secure Data Access in Mobile Environment. Paper presented at the 39th IEEE Conference on Local Computer Networks, 08-09-2014 - 11-09-2014, Edmonton, Canada.
Li, S., Oikonomou, G., Tryfonas, T. , Chen, T. & Xu, L. D. (2014). A Distributed Consensus Algorithm for Decision Making in Service-Oriented Internet of Things. IEEE Transactions on Industrial Informatics, 10(2), pp. 1461-1468. doi: 10.1109/tii.2014.2306331
Li, Y-L. & Sayma, A. I. (2014). Numerical investigation of VSVs mal-schedule effects in a threestage axial compressor. Paper presented at the ASME Turbo Expo 2014: Turbine Technical Conference and Exposition, 16-06-2014 - 20-06-2014, Dusseldorf, Germany. doi: 10.1115/GT2014-25145
Li, Y., Hu, Z., Weng, T. , Fonseca, J. & Zhang, X. (2014). Experimental study on the vertical deformation of sand caused by cyclic withdrawal and recharging of groundwater. Engineering Geology, 183, pp. 247-253. doi: 10.1016/j.enggeo.2014.08.020
Li, Y. & Sayma, A. I. (2014). Computational fluid dynamics simulations of blade damage effect on the performance of a transonic axial compressor near stall. Proceedings of the Institution of Mechanical Engineers Part C: Journal of Mechanical Engineering Science, 229(12), pp. 2242-2260. doi: 10.1177/0954406214553828
Lipowiecki, M., Ryvolova, M., Toettoesi, A. , Kolmer, N., Naher, S., Brennan, S.A., Vazquez, M. & Brabazon, D. (2014). Permeability of rapid prototyped artificial bone scaffold structures. Journal of Biomedical Materials Research Part A, 102(11), pp. 4127-4135. doi: 10.1002/jbm.a.35084
Liu, Y. & Xu, H. (2014). Entropic approximation for mathematical programs with robust equilibrium constraints. SIAM Journal on Optimization, 24(3), pp. 933-958. doi: 10.1137/130931011
Llado, X., Imiya, A., Reyes-Aldasoro, C. C. , Mason, D., Aoki, K., Kudo, M., Zhang, Y. & Argyriou, V. (2014). Homage to Professor Maria Petrou. Pattern Recognition Letters, 48, pp. 2-7. doi: 10.1016/j.patrec.2014.06.008
Lockett, R. D., Huang, Y. & Woolley, R. (2014). Instabilities in high pressure, iso-octane-air spherical explosion flames. Paper presented at the 8th International Seminar on Flame Structure, 21-24 Sep 2014, Berlin, Germany. doi: 10.13140/2.1.1268.7364
Lockett, R. D. & Robertson, G. (2014). A Dynamical Systems Analysis of Methanol-Air Auto-Ignition. ., doi: 10.13140/2.1.2907.1369
Lungu, A. (2014). Wavelet-Based Characterization and Stochastic Modelling of Pulse-like Ground Motions on the Time-frequency Plane. (Unpublished Doctoral thesis, City University London)
Malgarinos, I., Nikolopoulos, N., Marengo, M. , Antonini, C. & Gavaises, M. (2014). VOF simulations of the contact angle dynamics during the drop spreading: Standard models and a new wetting force model. Advances in Colloid and Interface Science, 212, pp. 1-20. doi: 10.1016/j.cis.2014.07.004
Markides, Christos (2014). Implementation of the Finite Difference Time Domain algorithm for the analysis of terahertz waves. (Unpublished Doctoral thesis, City University, London)
May, J.M., Hickey, M., Triantis, I. , Palazidou, E. & Kyriacou, P. A. (2014). Optical analysis of Lithium Carbonate: Towards the development of a Portable Lithium Blood Level analyzer for Bipolar Disorder Patients. 2014 36th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), pp. 2077-2080. doi: 10.1109/EMBC.2014.6944025
May, J.M., Kyriacou, P. A., Honsel, M. & Petros, A. J. (2014). Investigation of photoplethysmographs from the anterior fontanelle of neonates. Physiological Measurement, 35(10), pp. 1961-1973. doi: 10.1088/0967-3334/35/10/1961
McCague, C., Fabian, M., Karimi, M. , Bravo, M., Jaroszewicz, L. R., Mergo, P., Sun, T. & Grattan, K. T. V. (2014). Novel Sensor Design Using Photonic Crystal Fibres for Monitoring the Onset of Corrosion in Reinforced Concrete Structures. Journal of Lightwave Technology, 32(5), pp. 891-896. doi: 10.1109/jlt.2013.2293120
McCague, C., Fabian, M., Sun, T. , Grattan, K. T. V., Shi, S. & Bai, Y. (2014). Application of fibre Bragg gratings for the optimization of microwave-cured concrete. Paper presented at the 5th Symposium on Environmental Instrumentation and Measurements, 23-24 Sep 2014, Chemnitz, Germany.
McNamara, A. M., Suckling, T., McKinley, B. & Stallebrass, S. E. (2014). A field trial of a reusable, hollow, cast-in-situ pile. Proceedings of the ICE - Geotechnical Engineering, 167(4), pp. 390-401. doi: 10.1680/geng.12.00102
Mergos, P.E. & Beyer, K. (2014). Loading protocols for European regions of low to moderate seismicity. Bulletin of Earthquake Engineering, 12(6), pp. 2507-2530. doi: 10.1007/s10518-014-9603-3
Mergos, P.E. & Beyer, K. (2014). Modelling shear-flexure interaction in equivalent frame models of slender RC walls. The Structural Design of Tall and Special Buildings, 23(15), pp. 1171-1189. doi: 10.1002/tal.1114
Miao, X., Zhang, Q., Jiang, H. & Qi, H. (2014). Application of riblets on turbine blade endwall secondary flow control. Paper presented at the ASME Turbo Expo 2014: Turbine Technical Conference and Exposition, 16-06-2014 - 20-06-2014, Dusseldorf, Germany. doi: 10.1115/GT2014-26823
Mikulich, V. & Brücker, C. (2014). Cavitation by spall fracture of solid walls in liquids. Experiments in Fluids, 55(7), article number 1785. doi: 10.1007/s00348-014-1785-6
Milojevic, M. & Rakocevic, V. (2014). Distributed Road Traffic Congestion Quantification Using Cooperative VANETs. 13th Annual Mediterranean Ad Hoc Networking Workshop (MED-HOC-NET), pp. 203-210. doi: 10.1109/MedHocNet.2014.6849125
Mitroglou, N., McLorn, M., Gavaises, M. , Soteriou, C. & Winterbourne, M. (2014). Instantaneous and ensemble average cavitation structures in Diesel micro-channel flow orifices. Fuel, 116, pp. 736-742. doi: 10.1016/j.fuel.2013.08.060
Moreno-Ramirez, C. & Tomas-Rodriguez, M. (2014). Non linear optimization of a sport motorcycle's suspension interconnection system. In: 2014 UKACC INTERNATIONAL CONFERENCE ON CONTROL (CONTROL). 2014 UKACC International Conference on Control (CONTROL), 09-07-2014 - 11-07-2014, Loughbrough, UK.
Naher, S., Ahmad, A.H. & Brabazon, D. (2014). Direct thermal method of aluminium 7075. Advanced Materials Research, 939, pp. 400-408. doi: 10.4028/www.scientific.net/AMR.939.400
Nguyen, T.H., Venugopala, T., Chen, S. , Sun, T., Grattan, K. T. V., Taylor, S.E., Basheer, P.A.M. & Long, A.E. (2014). Fluorescence based fibre optic pH sensor for the pH 10-13 range suitable for corrosion monitoring in concrete structures. Sensors and Actuators, B: Chemical, 191, pp. 498-507. doi: 10.1016/j.snb.2013.09.072
Nicolas Marichal, G., Tomas-Rodriguez, M., Hernandez, A. , Castillo-Rivera, S. & Campoy, P. (2014). Vibration reduction for vision systems on board unmanned aerial vehicles using a neuro-fuzzy controller. Journal of Vibration and Control, 20(15), pp. 2243-2253. doi: 10.1177/1077546313479632
Oates, A., Cabrera-Espana, F., Agrawal, A. & Reehal, H. S. (2014). Fabrication and characterisation of Si micropillar PV structures. Energy Materials, 9(4), pp. 500-504. doi: 10.1179/1433075X14Y.0000000244
Ohadi, A. & Micic, T. (2014). Imperfect inspection characterization for gamma process structural deterioration model. In: Safety, Reliability, Risk and Life-Cycle Performance of Structures and Infrastructures. (pp. 4033-4039). UK: CRC Press.
Ozkul, S., Ayoub, A. & Altunkaynak, A. (2014). Fuzzy-logic based inelastic displacement ratios of degrading RC structures. ENGINEERING STRUCTURES, 75, pp. 590-603. doi: 10.1016/j.engstruct.2014.06.030
Pacholak, S., Hochstein, S., Rudert, A. & Brücker, C. (2014). Unsteady flow phenomena in human undulatory swimming: a numerical approach. Sports Biomechanics, 13(2), pp. 176-194. doi: 10.1080/14763141.2014.893609
Papadopoulos, Konstantinos, Gavaises, M. & Atkin, C. (2014). A simplified mathematical model for thrombin generation. Medical Engineering and Physics, 36(2), pp. 196-204. doi: 10.1016/j.medengphy.2013.10.012
Papanikolau, V. K. & Kappos, A. J. (2014). Practical nonlinear analysis of unreinforced concrete tunnel linings. Tunnelling and Underground Space Technology incorporating Trenchless Technology Research, 40, pp. 127-140. doi: 10.1016/j.tust.2013.09.016
Pawar, P. S., Rajarajan, M., Dimitrakos, T. & Zisman, A. (2014). Trust Assessment Using Cloud Broker. In: Zhou, J., Gal-Oz, N., Zhang, J. & Gudes, E, (Eds.), Trust Management VIII. IFIP Advances in Information and Communication Technology, 430. (pp. 237-244). Springer.
Phillips, N., Stallebrass, S. E., Goodey, R.J. & Jefferis, S. A. (2014). Test development for the investigation of soil disaggregation during slurry tunnelling. Paper presented at the ICPMG2014 – Physical Modelling in Geotechnics, 14-01-2014 - 17-01-2014, Perth, WA.
Pomarico-Franquiz, J., Khan, S. & Shmaliy, Y. S. (2014). Combined extended FIR/Kalman filtering for indoor robot localization via triangulation. Measurement, 50(1), pp. 236-243. doi: 10.1016/j.measurement.2013.12.045
Preziosi, M-C. & Micic, T. (2014). An adaptive methodology for risk classification of small homogeneous earthfill embankment dams integrating climate change projections. Civil Engineering and Environmental Systems, 31(2), pp. 111-124. doi: 10.1080/10286608.2014.912639
Pullen, K. R. & Dhand, A. (2014). Characterization of Flywheel Energy Storage System for Hybrid Vehicles. Paper presented at the SAE 2014 World Congress & Exhibition, 08-04-2014 - 10-04-2014, Detroit, USA. doi: 10.4271/2014-01-1796
Pullen, K. R. & Dhand, A. (2014). Mechanical and electrical flywheel hybrid technology to store energy in vehicles. In: Alternative Fuels and Advanced Vehicle Technologies for Improved Environmental Performance. (pp. 476-504). Woodhead Publishing. doi: 10.1533/9780857097422.2.476
Qassem, M. & Kyriacou, P. A. (2014). Effectiveness of the DreamSkin (R) garment on relieving symptoms of Eczema/Dermatitis using electrical and spectroscopic methods: a case study. 2014 36th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), pp. 3723-3726. doi: 10.1109/EMBC.2014.6944432
Qassem, M. & Kyriacou, P. A. (2014). Investigating skin barrier function utilizing reflectance NIR Spectroscopy. 2014 36th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), 2014, pp. 3735-3738. doi: 10.1109/embc.2014.6944435
Qassem, M. & Kyriacou, P. A. (2014). Use of reflectance near-infrared spectroscopy to investigate the effects of daily moisturizer application on skin optical response and barrier function. Journal of Biomedical Optics, 19(8), article number 087007. doi: 10.1117/1.jbo.19.8.087007
Qu, H., Huo, J., Xu, C. & Fu, F. ORCID: 0000-0002-9176-8159 (2014). Numerical studies on dynamic behavior of tubular T-joint subjected to impact loading. International Journal of Inpact Engineering, 67, pp. 12-26. doi: 10.1016/j.ijimpeng.2014.01.002
Rahman, B. M., Markides, C., Uthman, M. , Quadir, A., Kejalakshmy, N. & Themistos, C. (2014). Characterization of low-loss waveguides and devices for terahertz radiation. Optical Engineering (OE), 53(3), article number 031210. doi: 10.1117/1.oe.53.3.031210
Rahman, B. M., Rahman, M. M., Sriratanavaree, S. , Kejalakshmy, N. & Grattan, K. T. V. (2014). Rigorous analysis of the transverse acoustic modes in optical waveguides by exploiting their structural symmetry. Applied Optics, 53(29), pp. 6797-6803. doi: 10.1364/ao.53.006797
Rahulamathavan, Y., Moonsamy, V., Batten, L. , Shunliang, S. & Rajarajan, M. (2014). An Analysis of Tracking Service Settings in Blackberry 10 and Windows Phone 8 Smartphones. In: Information Security and Privacy. Lecture Notes in Computer Science, 14 (8544). (pp. 430-437). Springer.
Rakocevic, V. (2014). Clustering for networks of moving objects. Lecture Notes in Computer Science, 8611, pp. 70-87. doi: 10.1007/978-3-319-10834-6_5
Rakocevic, V., Jahromizadeh, S., Gruber, J. K. & Prodanovic, M. (2014). Demand management for home energy networks using cost-optimal appliance scheduling. In: SMARTGREENS 2014 - Proceedings of the 3rd International Conference on Smart Grids and Green IT Systems. 3rd International Conference on Smart Grids and Green IT Systems, 03-04 Apr 2014, Barcelona, Spain.
Rane, S., Kovacevic, A., Stosic, N. & Kethidi, M. (2014). Deforming grid generation and CFD analysis of variable geometry screw compressors. Computers and Fluids, 99, pp. 124-141. doi: 10.1016/j.compfluid.2014.04.024
Raoufi, N. (2014). Development of wavelength dependent pH optical sensor using Layer-by-Layer technique. (Unpublished Doctoral thesis, City University London)
Raoufi, N., Surre, F., Rajarajan, M. , Sun, T. & Grattan, K. T. V. (2014). Optical sensor for pH monitoring using a layer-by-layer deposition technique emphasizing enhanced stability and re-usability. Sensors and Actuators B Chemical, 195, pp. 692-701. doi: 10.1016/j.snb.2014.01.080
Read, M. G., Smith, I. & Stosic, N. (2014). Effect of air temperature variation on the performance of wet vapour organic rankine cycle systems. Geothermal Resources Council Transactions, 38, pp. 705-712.
Read, M. G., Smith, I. K. & Stosic, N. (2014). Multi-Variable Optimisation of Wet Vapour Organic Rankine Cycles with Twin-Screw Expanders. Paper presented at the 22nd International Compressor Engineering Conference, 14-17 Jul 2014, Perdue, France.
Read, M. G., Stosic, N. & Smith, I. K. (2014). Optimization of Screw Expanders for Power Recovery From Low-Grade Heat Sources. Energy Technology & Policy, 1(1), pp. 131-142. doi: 10.1080/23317000.2014.969454
Reid, B. A., Gavaises, M., Mitroglou, N. , Hargrave, G. K., Garner, C. P., Long, E. J. & McDavid, R. M. (2014). On the formation of string cavitation inside fuel injectors. Experiments in Fluids, 55(1), article number 1662. doi: 10.1007/s00348-013-1662-8
Rockenbach, A., Brücker, C. & Schnakenberg, U. (2014). Pneumatically actuated biomimetic particle transporter. 2014 IEEE 27th International Conference on Micro Electro Mechanical Systems (MEMS), 12, pp. 927-930. doi: 10.1109/memsys.2014.6765794
Sarhosis, V., Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 & Giannopoulos, I. (2014). Discrete element modelling of masonry infilled steel frames with multiple window openings subjected to lateral load variations. Open Construction and Building Technology Journal, 8(1), pp. 93-103. doi: 10.2174/1874836801408010093
Sastuba, M., Skupsch, C. & Bruecker, C. ORCID: 0000-0001-5834-3020 (2014). Real time visualization and analysis of sensory hair arrays using fast image processing and proper orthogonal decomposition. Paper presented at the 17th International Symposium on Applications of Laser and Imaging Techniques to Fluid Mechanics, 7-10 July 2014, Lisbon, Portugal.
Shittu, R., Healing, A., Ghanea-Hercock, R. , Bloomfield, R. E. & Rajarajan, M. (2014). A New Metric for Prioritising Intrusion Alerts Using Correlation and Outlier Analysis. Paper presented at the 39th IEEE Conference on Local Computer Networks, 08-09-2014 - 11-09-2014, Edmonton, Canada.
Soudi, S. & Rahman, B. M. (2014). Design of compact polarization rotator using simple silicon nanowires. Applied Optics, 53(34), pp. 8071-8077. doi: 10.1364/ao.53.008071
Sriram, V., Ma, Q. & Schlurmann, T. (2014). A hybrid method for modelling two dimensional non-breaking and breaking waves. Journal of Computational Physics, 272, pp. 429-454. doi: 10.1016/j.jcp.2014.04.030
Sriratanavaree, S., Rahman, B. M., Leung, D. M. H. , Kejalakshmy, N. & Grattan, K. T. V. (2014). Full-Vectorial Finite-Element Analysis of Acoustic Modes in Silica Waveguides. IEEE Journal of Quantum Electronics, 50(12), pp. 1006-1013. doi: 10.1109/jqe.2014.2364199
Sriratanavaree, S., Rahman, B. M., Leung, D. M. H. , Kejalakshmy, N. & Grattan, K. T. V. (2014). Rigorous characterization of acoustic-optical interactions in silicon slot waveguides by full-vectorial finite element method. Optics Express, 22(8), pp. 9528-9537. doi: 10.1364/oe.22.009528
Sriratanavaree, Suchara (2014). Characterisation of acoustic waves in optical waveguides. (Unpublished Doctoral thesis, City University London)
Stankovic, Stanislava (2014). Investigation of advanced experimental and computational techniques for behavioural characterisation of phase change materials (pcms). (Unpublished Doctoral thesis, City University London)
Sun, Z., Longmire, E. K. & Krizan, D. (2014). Interactions of copepods with fractal-grid generated turbulence based on Tomo-PIV and 3D-PTV. Paper presented at the 67th Annual Meeting of the APS Division of Fluid Dynamics, 23-11-2014 - 25-11-2014, San Francisco, USA.
Sun, Z., Scarano, F., van Oudheusden, B. W. , Schrijer, F. F. J., Yan, Y. & Liu, C. (2014). Numerical and experimental investigations of the supersonic microramp wake. AIAA Journal, 52(7), pp. 1518-1527. doi: 10.2514/1.j052649
Sun, Z., Schrijer, F. F. J., Scarano, F. & van Oudheusden, B. W. (2014). Decay of the supersonic turbulent wakes from micro-ramps. Physics of Fluids, 26(2), article number 025115. doi: 10.1063/1.4866012
TauSiesakul, B., Gkoktsi, K. & Giaralis, A. (2014). Compressive sensing spectral estimation for output-only structural system identification. Paper presented at the 7th Stochastic Computational Mechanics Conference, 15-18 June 2014, Santorini, Greece.
Terminelli, L., Carpignano, F., May, J.M. , Merlo, S. & Kyriacou, P. A. (2014). Photoplethysmography and electrocardiography for real time evaluation of pulse transit time A diagnostic marker of peripheral vascular diseases. In: 2014 Fotonica AEIT Italian Conference on Photonics Technologies. . Italy: IEEE Computer Society. doi: 10.1109/Fotonica.2014.6843951
Themistos, C., Rahman, B. M., Markides, C. , Uthman, M., Quadir, A. & Kejalakshmy, N. (2014). Characterization of graphene-based devices for THz Systems. In: Terahertz Physics, Devices, and Systems VIII: Advanced Applications in Industry and Defense. . SPIE. doi: 10.1117/12.2054784
Theodorakakos, A., Strotos, G., Mitroglou, N. , Atkin, C. & Gavaises, M. (2014). Friction-induced heating in nozzle hole micro-channels under extreme fuel pressurisation. Fuel, 123, pp. 143-150. doi: 10.1016/j.fuel.2014.01.050
Thermou, G. E., Papanikolaou, V.K. & Kappos, A. J. (2014). Flexural behaviour of reinforced concrete jacketed columns under reversed cyclic loading. Engineering Structures, 76, pp. 270-282. doi: 10.1016/j.engstruct.2014.07.013
Toja-Silva, F., Favier, J. & Pinelli, A. (2014). Radial basis function (RBF)-based interpolation and spreading for the immersed boundary method. Computers & Fluids, 105, pp. 66-75. doi: 10.1016/j.compfluid.2014.09.026
Tran, Q.D (2014). One-class Classification: An Approach to Handle Class Imbalance in Multimodal Biometric Authentication. (Unpublished Doctoral thesis, City, University of London)
Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979, Faghih, F. & Nikitas, N. (2014). Assessment of Perforated Steel Beam-to-Column Connections Subjected to Cyclic Loading. Journal of Earthquake Engineering, 18(8), pp. 1302-1325. doi: 10.1080/13632469.2014.935834
Tu, Minh Hieu (2014). Investigation of metal nanomaterials as a sensing element in LSPR-based optical fibre sensor development. (Unpublished Doctoral thesis, City University London)
Tung, H. C., Tsang, K. F., Lam, K. L. , Tung, H. Y., Li, B. Y., Yeung, L. F., Ko, K. T., Lau, W. H. & Rakocevic, V. (2014). A mobility enabled inpatient monitoring system using a ZigBee medical sensor network. Sensors, 14(2), pp. 2397-2416. doi: 10.3390/s140202397
Ul Asad, H., Jones, K. & Surre, F. (2014). Verifying robust frequency domain properties of non linear oscillators using SMT. In: Pleskacz, W., Renovell, M. & Kasprowicz, D. (Eds.), 17th International Symposium on Design and Diagnostics of Electronic Circuits & Systems. 17th Symposium on Design & Diagnostics of Electronic Circuits & Systems, 23rd - 25th April 2014, Warsaw, Poland. doi: 10.1109/DDECS.2014.6868816
Valero-Lara, P., Pinelli, A. & Prieto-Matias, M. (2014). Accelerating solid-fluid interaction using Lattice-Boltzmann and Immersed Boundary coupled simulations on heterogeneous platforms. Procedia Computer Science, 29, pp. 50-61. doi: 10.1016/j.procs.2014.05.005
Valero-Lara, P., Pinelli, A. & Prieto-Matias, M. (2014). Fast finite difference Poisson solvers on heterogeneous architectures. Computer Physics Communications Package, 185(4), pp. 1265-1272. doi: 10.1016/j.cpc.2013.12.026
Veluru, S., Rahulamathavan, Y., Manandhar, S. & Rajarajan, M. (2014). Correlated Community Estimation Models Over a Set of Names. Paper presented at the IEEE Technically Co-Sponsored Science and Information Conference, 27-08-2014 - 29-08-2014, London, UK.
Viphavakit, C., Atthi, N., Boonruang, S. , Themistos, C., Komodromos, M., Mohammed, W. S. & Rahman, B. M. (2014). Realization of a polymer nanowire optical transducer by using the nanoimprint technique. Applied Optics, 53(31), pp. 7487-7497. doi: 10.1364/ao.53.007487
Viphavakit, C., Atthi, N., Boonruang, S. , Themistos, C., Mohammed, W. S., Kalli, K., Rahman, B. M. & Komodromos, M. (2014). Characterization of polymer nanowires fabricated using the nanoimprint method. Proceedings of SPIE, 9126, article number 912632. doi: 10.1117/12.2052276
Wang, X., Yan, Y., Sun, Z. & Liu, C. (2014). LES investigation into the generation of momentum deficits in the supersonic wake of a micro-ramp. Journal of Mechanical Science and Technology, 28(4), pp. 1327-1337. doi: 10.1007/s12206-013-1164-x
Wang, X., Yan, Y., Sun, Z. & Liu, C. (2014). The Vortical Structures in the Rear Separation and Wake Produced by a Supersonic Micro-Ramp. Flow, Turbulence and Combustion, 93(1), pp. 25-36. doi: 10.1007/s10494-014-9531-y
Williams, L. J., Mukherjee, D., Fisher, M. , Reyes-Aldasoro, C. C., Akerman, S., Kanthou, C. & Tozer, G. M. (2014). An in vivo role for Rho kinase activation in the tumour vascular disrupting activity of combretastatin A-4 3-O-phosphate. British Journal of Pharmacology, 171(21), pp. 4902-4913. doi: 10.1111/bph.12817
Wren, S., Nguyen, T.H., Gascoine, P. , Lacey, R., Sun, T. & Grattan, K. T. V. (2014). Preparation of novel optical fibre-based Cocaine sensors using a molecular imprinted polymer approach. Sensors and Actuators, B: Chemical, 193, pp. 35-41. doi: 10.1016/j.snb.2013.11.071
Wren, S., Piletsky, S, Karim, K. , Gascoine, P., Lacey, R., Sun, T. & Grattan, K. T. V. (2014). Design and synthesis of a fluorescent molecular imprinted polymer for use in an optical fibre-based cocaine sensor. Proceedings of SPIE - The International Society for Optical Engineering, 9157, article number 91574W. doi: 10.1117/12.2059278
Wu, B., Tuncer, H. M., Katsounaros, A. , Wu, W., Cole, M. T., Ying, K., Zhang, L., Milne, W. I. & Hao, Y. (2014). Microwave absorption and radiation from large-area multilayer CVD graphene. Carbon, 77, pp. 814-822. doi: 10.1016/j.carbon.2014.05.086
Xu, Q., Chen, T., Hu, Y. & Gong, P. (2014). Write Pattern Format Algorithm for Reliable NAND-Based SSDs. IEEE Transactions on Circuits and Systems II: Express Briefs, 61(7), pp. 516-520. doi: 10.1109/tcsii.2014.2327332
Xu, Q., Gong, P. & Chen, T. (2014). Concatenated LDPC-TCM coding for reliable storage in multi-level flash memories. 2014 9th International Symposium on Communication Systems, Networks and Digital Signal Processing (CSNDSP), pp. 166-170. doi: 10.1109/CSNDSP.2014.6923818
Yang, Y., Wang, Y. & Fu, F. ORCID: 0000-0002-9176-8159 (2014). Effect of reinforcement stiffeners on square concrete-filled steel tubular columns subjected to axial compressive load. Thin-Walled Structures, 82, pp. 132-144. doi: 10.1016/j.tws.2014.04.009
Zaidi, K., Milojevic, M., Rakocevic, V. & Rajarajan, M. (2014). Data Centric Rogue Node Detection in VANETs. Paper presented at the IEEE Trustcom, 24-09-2014 - 26-09-2014, Beijing, China.
Zhang, Q. & He, L. (2014). Impact of wall temperature on turbine blade tip aerothermal performance. Journal of Engineering for Gas Turbines and Power, 136(5), article number 52602. doi: 10.1115/1.4026001
Zheng, X., Ma, Q. & Duan, W.Y. (2014). Incompressible SPH method based on Rankine source solution for violent water wave simulation. Journal of Computational Physics, 276, pp. 291-314. doi: 10.1016/j.jcp.2014.07.036
Zhou, B., Yang, S., Sun, T. & Grattan, K. T. V. (2014). A novel wireless mobile platform integrated with optical fibre sensors. Proceedings of SPIE - The International Society for Optical Engineering, 9157, article number 915798. doi: 10.1117/12.2059307
2013
Abdelmalik, A. A., Fothergill, J. & Dodd, S. J. (2013). Aging of Kraft paper insulation in natural ester dielectric fluid. Proceedings of IEEE International Conference on Solid Dielectrics, ICSD, 132, pp. 541-544. doi: 10.1109/icsd.2013.6619678
Abdollahi, Z., Phillips, J. P. & Kyriacou, P. A. (2013). Evaluation of a combined reflectance photoplethysmography and laser Doppler flowmetry surface probe. 35th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), pp. 1728-1731. doi: 10.1109/EMBC.2013.6609853
Abdollahi, Z., Phillips, J. P. & Kyriacou, P. A. (2013). Evaluation of a combined reflectance photoplethysmography and laser Doppler flowmetry surface probe. Paper presented at the Engineering in Medicine and Biology Society (EMBC), 2013 35th Annual International Conference of the IEEE, 3 July - 7 July 2013, Osaka. doi: 10.1109/EMBC.2013.6609853
Agrawal, A., Azabi, Y. O. & Rahman, B. M. (2013). Stacking the Equiangular Spiral. IEEE Photonics Technology Letters, 25(3), pp. 291-294. doi: 10.1109/lpt.2012.2236309
Agrawal, A., Tiwari, M., Azabi, Y. O. , Janyani, V., Rahman, B. M. & Grattan, K. T. V. (2013). Ultrabroad supercontinuum generation in tellurite equiangular spiral photonic crystal fiber. Journal of Modern Optics, 60(12), pp. 956-962. doi: 10.1080/09500340.2013.825334
Akerman, S., Fisher, M., Daniel, R. A. , Lefley, D. V., Reyes-Aldasoro, C. C., Lunt, S. J., Harris, S., Björndahl, M. A., Williams, L. J., Evans, H., Barber, P. R., Prise, V. E., Vojnovic, B., Kanthou, C. & Tozer, G. M. (2013). Influence of soluble or matrix-bound isoforms of vascular endothelial growth factor-A on tumor response to vascular-targeted strategies. International Journal of Cancer, 133(11), pp. 2563-2576. doi: 10.1002/ijc.28281
Alwis, L., Bremer, K., Sun, T. & Grattan, K. T. V. (2013). Analysis of the Characteristics of PVA-Coated LPG-Based Sensors to Coating Thickness and Changes in the External Refractive Index. IEEE Sensors Journal, 13(3), pp. 1117-1124. doi: 10.1109/jsen.2012.2230534
Aristovich, E. & Khan, S. (2013). Non-invasive measurement of cholesterol in human blood by impedance technique: an investigation by 2D finite element field modelling. Journal of Physics: Conference Series, 459(1), article number 012030. doi: 10.1088/1742-6596/459/1/012030
Aristovich, E. & Khan, S. (2013). Non-invasive measurement of cholesterol in human blood by impedance technique: an investigation by 3D finite element field modelling. Journal of Physics: Conference Series, 450(1), article number 012057. doi: 10.1088/1742-6596/450/1/012057
Arjeneh, M., Pullen, K. R. & Etemad, S. (2013). Experimental study of radial low specific speed turbocompressor running in reverse as turboexpander. In: 8TH INTERNATIONAL CONFERENCE ON COMPRESSORS AND THEIR SYSTEMS. 8th International Conference on Compressors and their Systems, 09-09-2013 - 10-09-2013, City University London, UK.
Arnold, P., Rakocevic, V., Ramos, O. & Habermann, J. (2013). Algorithms for adaptive radio resource management in relay-assisted LTE-A networks. In: IEEE Vehicular Technology Conference. 2013 IEEE 77th Vehicular Technology Conference, 2 June - 5 June 2013, Dresden, Germany.
Arshi, H.S., Stone, K.J.L., Vaziri, M. , Newson, T.A., El-Marassi, M., Taylor, R.N. & Goodey, R.J. (2013). Modelling of monopile-footing foundation system for offshore structures. Paper presented at the 18th International Conference on Soil Mechanics and Geotechnical Engineering, 02-05 Sep 2013, Paris, France.
Barh, A., Rahman, B. M., Varshney, R. K. & Pal, B. P. (2013). Design and Performance Study of a Compact SOI Polarization Rotator at 1.55 mu m. Journal of Lightwave Technology, 31(23), pp. 3687-3693. doi: 10.1109/jlt.2013.2286859
Barh, A., Rahman, B. M., Varshney, R. K. & Pal, B. P. (2013). An efficient polarization converter for Mid-IR wavelength. In: Advanced Photonics 2013. Optical Sensors 2013, 14-17 Jul 2013, Peurto Rico, USA. doi: 10.1364/IPRSN.2013.JT3A.20
Belhaj, A., Phillips, J. P., Kyriacou, P. A. & Langford, R. M. (2013). Non-invasive optical estimation of local venous oxygen saturation. British Journal of Anaesthesia, 110(5), pp. 877-878. doi: 10.1093/bja/aes490
Belschner, J., de Abreu, D., Habermann, J. & Rakocevic, V. (2013). Scheduling Algorithm for Coordinated Beamforming in Heterogeneous Macro/Pico LTE-Advanced Networks. 2013 IEEE 77th Vehicular Technology Conference (VTC Spring), pp. 1-5. doi: 10.1109/vtcspring.2013.6692741
Buckney, D., Kovacevic, A. & Stosic, N. (2013). Experimental validation of a geometry model for twin screw machines. In: 8th International Conference on Compressors and their Systems. (pp. 237-246). Cambridge: Woodhead Publishing.
Budidha, K. & Kyriacou, P. A. (2013). Development of an optical probe to investigate the suitability of measuring photoplethysmographs and blood oxygen saturation from the human auditory canal. 2013 35th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), 2013, pp. 1736-1739. doi: 10.1109/EMBC.2013.6609855
Budidha, K. & Kyriacou, P. A. (2013). Development of an optical probe to investigate the suitability of measuring photoplethysmographs and blood oxygen saturation from the human auditory canal. Paper presented at the 35th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC’13), 03-07-2013 - 07-07-2013, Osaka, Japan. doi: 10.1109/EMBC.2013.6609855
Camara, A., Ruiz-Teran, A. M. & Stafford, P. J. (2013). Structural behaviour and design criteria of under-deck cable-stayed bridges subjected to seismic action. Earthquake Engineering and Structural Dynamics, 42(6), pp. 891-912. doi: 10.1002/eqe.2251
Cao, Jie (2013). Creation of novel gold-nanorod-based localized surface plasmon resonance biosensors. (Unpublished Doctoral thesis, City University London)
Chen, B., Riley, P. H., Abakr, Y. A. , Pullen, K. R., Hann, D. B. & Johnson, C. (2013). Design and development of a low-cost, electricity-generating cooking Score-Stove™. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 227(7), pp. 803-813. doi: 10.1177/0957650913498733
Chen, Shuling (2013). Hydrodynamic behaviour of gliding hydrofoil crafts. (Unpublished Doctoral thesis, City University London)
Chrysostomou, C. Z., Kyriakides, N., Kappos, A. J. , Kouris, L., Georgiou, E. & Millis, M. (2013). Seismic retrofitting and health monitoring of school buildings of Cyprus. Open Construction and Building Technology Journal, 7(1), pp. 208-220. doi: 10.2174/1874836801307010208
Chukanova, E., Stosic, N. & Kovacevic, A. (2013). Numerical analysis of unsteady behaviour of a screw compressor plant system. In: 8th International Conference on Compressors and their Systems. (pp. 129-139). Cambridge: Woodhead Publishing.
De Martino, A., Hütten, A. & Egger, R. (2013). Landau Levels and Edge States in Graphene with Strong Spin-Orbit Coupling. NATO Science for Peace and Security Series B: Physics and Biophysics, 2013, pp. 97-117. doi: 10.1007/978-94-007-6618-1_8
Dennis, R. & Pullen, K. R. (2013). Development of a wood-fired cooking stove to incorporate a thermo-acoustic engine-generator unit. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 227(7), pp. 740-751. doi: 10.1177/0957650913498735
Dhand, A. & Pullen, K. R. (2013). Review of Flywheel based Internal Combustion Engine Hybrid Vehicles. International Journal of Automotive Technology, 14(5), pp. 797-804. doi: 10.1007/s12239-013-0088-x
Dhand, A. & Pullen, K. R. (2013). Simulation based study of battery electric vehicle performance in real world cycles. International Journal of Electric and Hybrid Vehicles, 5(4), pp. 327-343. doi: 10.1504/ijehv.2013.059372
Divall, S. (2013). Ground movements associated with twin-tunnel construction in clay. (Unpublished Doctoral thesis, City University London)
Eden, N., Kaparias, I., Tsakarestos, A. , Gal-Tzur, A., Schmitz, P., Hoadley, S., Harrich, M. & Hauptmann, S. (2013). Using Key Performance Indicators for multi-criteria traffic management strategic decisions. Paper presented at the 9th European Intelligent Transport Systems Congress, 04-06-2013 - 07-06-2013, Dublin, Ireland.
Elgayar, Ibrahim (2013). Mathematical modelling, flight control system design and air flow control investigation for low speed UAVs. (Unpublished Doctoral thesis, City University London)
Evangelou, S. A., Limebeer, D. J. N. & Tomas-Rodriguez, M. (2013). Suppression of Burst Oscillations in Racing Motorcycles. Journal Of Applied Mechanics, 80(1), pp. 5578-5585. doi: 10.1115/1.4006491
Evangelou, S. A., Limebeer, D. J. N. & Tomas-Rodriguez, M. (2013). Suppression of Burst Oscillations in Racing Motorcycles. Paper presented at the 49th IEEE Conference on Decision and Control, 15-12-2010 - 17-12-2010, Atlanta, USA. doi: 10.1115/1.4006491
Evans, A. & Schäfer, A. (2013). The Rebound Effect in the Aviation Sector. Energy Economics, 36, pp. 158-165. doi: 10.1016/j.eneco.2012.12.005
Fatouros, S., Karcanias, N., Christou, D. & Papadopoulos, P. (2013). Approximate greatest common divisor of many polynomials and pseudo-spectrum. System, Structure and Control, 46(2), pp. 623-628. doi: 10.3182/20130204-3-fr-2033.00113
Fazzolari, F. A., Banerjee, J. R. & Boscolo, M. (2013). Buckling of composite plate assemblies using higher order shear deformation theory-An exact method of solution. Thin-Walled Structures, 71, pp. 18-34. doi: 10.1016/j.tws.2013.04.017
Fazzolari, F. A., Boscolo, M. & Banerjee, J. R. (2013). An exact dynamic stiffness element using a higher order shear deformation theory for free vibration analysis of composite plate assemblies. Composite Structures, 96, pp. 262-278. doi: 10.1016/j.compstruct.2012.08.033
Fonseca, J., Bésuelle, P. & Viggiani, G. (2013). Microstructure evolution on sandstones with different degrees of cementation. Paper presented at the Workshop on Experimental Micromechanics for Geomaterials (ISSMGE TC101-TC105), 23-5-2013 - 24-5-2013, Hong Kong.
Fonseca, J., Bésuelle, P. & Viggiani, G. (2013). An experimental study of micro-scale deformation in a soft sandstone. Paper presented at the Proceedings of the 1st International Conference on Tomography of Materials and Structures (ICTMS2013), 01-07-2013 - 05-07-2013, Ghent, Belgium.
Fonseca, J., O'Sullivan, C., Coop, M. R. & Lee, P. D. (2013). Quantifying the evolution of soil fabric during shearing using directional parameters. Géotechnique, 63(6), pp. 487-499. doi: 10.1680/geot.12.p.003
Fonseca, J., O'Sullivan, C., Coop, M. R. & Lee, P. D. (2013). Quantifying the evolution of soil fabric during shearing using scalar parameters. Géotechnique, 63(10), pp. 818-829. doi: 10.1680/geot.11.p.150
Fonseca, J., O'Sullivan, C., Nagira, T. , Yasuda, H. & Gourlay, C. M. (2013). In situ study of granular micromechanics in semi-solid carbon steels. Acta Materialia, 61(11), pp. 4169-4179. doi: 10.1016/j.actamat.2013.03.043
Fu, F. ORCID: 0000-0002-9176-8159 (2013). Dynamic response and robustness of tall buildings under blast loading. Journal of Constructional Steel Research, 80, pp. 299-307. doi: 10.1016/j.jcsr.2012.10.001
Gavaises, E., Marengo, M., Antonini, C. , Nikolopoulos, N. & Malgarinos, I. (2013). Numerical investigation of droplet impingement onto hydrophobic and super-hydrophobic solid surfaces. The effect of Weber number and wettability. Paper presented at the ILASS 2013 - 25th Annual Conference on Liquid Atomization and Spray Systems, 1-4 Sept 2013, Chania, Crete.
Gavaises, E., Mirshahi, M., Nouri, J. M. & Yan, Y. (2013). Link between in-nozzle cavitation and jet spray in a gasoline multi-hole injector. Paper presented at the ILASS 2013 - 25th Annual Conference on Liquid Atomization and Spray Systems, 1-4 Sept 2013, Chania, Crete.
Gavaises, E., Rewse-Davies, Z., Nouri, J. M. & Arcoumanis, C. (2013). Near-Nozzle Instabilities in Gasoline Direct Injection Sprays. Paper presented at the ILASS 2013 - 25th Annual Conference on Liquid Atomization and Spray Systems, 1-4 Sept 2013, Chania, Crete.
Giaralis, A. & Spanos, P. D. (2013). Derivation of equivalent linear properties of Bouc-Wen hysteretic systems for seismic response spectrum analysis via statistical linearization. Paper presented at the 10th HSTAM International Congress on Mechanics, 25 - 27 May 2013, Chania, Greece.
Gonschior, C. P. (2013). Development of fibre-optic transmission systems with UV diode lasers and high stability single-mode waveguides. (Unpublished Doctoral thesis, City University London)
Gonschior, C. P., Klein, K.-F., Heyse, D. , Baumann, S., Sun, T. & Grattan, K. T. V. (2013). High power 405 nm diode laser fiber-coupled single-mode system with high long-term stability. Proceedings of SPIE - The International Society for Optical Engineering, 8605, article number 86050O. doi: 10.1117/12.2003888
Gonschior, C. P., Klein, K.-F., Sun, T. & Grattan, K. T. V. (2013). Generation of periodic surface structures on silica fibre surfaces using 405 nm CW diode lasers. Journal of Non-Crystalline Solids, 361(1), pp. 106-110. doi: 10.1016/j.jnoncrysol.2012.11.004
Gorasia, Rohit J. (2013). Behaviour of ribbed piles in clay. (Unpublished Doctoral thesis, City University London)
Gowreesunker, B. L., Stankovic, S. B., Tassou, S. A. & Kyriacou, P. A. (2013). Experimental and numerical investigations of the optical and thermal aspects of a PCM-glazed unit. Energy and Buildings, 61, pp. 239-249. doi: 10.1016/j.enbuild.2013.02.032
Grattan, K. T. V., Sun, T. & Khan, S. (2013). Ludwik Finkelstein and measurement - A challenge for the future. Measurement, 46(8), pp. 2990-2992. doi: 10.1016/j.measurement.2013.04.053
Guan, W., He, J., Tang, Z. & Chen, T. (2013). Design and Evaluation of a Framework for Cooperative and Adaptive QoS Control of DSRC Network for Road Safety Applications. International Journal of Distributed Sensor Networks, 9(11), pp. 1-10. doi: 10.1155/2013/946931
Guo, L., Gao, S., Fu, F. & Wang, Y. (2013). Experimental study and numerical analysis of progressive collapse resistance of composite frames. Journal of Constructional Steel Research, 89, pp. 236-251. doi: 10.1016/j.jcsr.2013.07.006
Halikias, G., Galanis, G., Karcanias, N. & Milonidis, E. (2013). Nearest common root of polynomials, approximate greatest common divisor and the structured singular value. IMA Journal of Mathematical Control and Information, 30(4), pp. 423-442. doi: 10.1093/imamci/dns032
Halikias, G. ORCID: 0000-0003-1260-1383, Karcanias, N. ORCID: 0000-0002-1889-6314 & Papageorgiou, A. (2013). The distance to strong stability. Linear Algebra and its Applications, 439(10), pp. 2721-2735. doi: 10.1016/j.laa.2013.09.003
Henry, K. M., Pase, L., Ramos-Lopez, C. F. , Lieschke, G. J., Renshaw, S. A. & Reyes-Aldasoro, C. C. (2013). PhagoSight: an open-source MATLAB® package for the analysis of fluorescent neutrophil and macrophage migration in a zebrafish model. PLoS One, 8(8), article number e72636. doi: 10.1371/journal.pone.0072636
Hess, D., Bruecker, C. ORCID: 0000-0001-5834-3020 & Nonn, T. (2013). Combined 3D Scanning PIV and Scanning LIF for flow and phase transfer measurements around a melting particle. In: Proceedings of the 10th Int. Symp. Particle Image Velocimetry. 10th International Symposium on Particle IMage Velocimetry, 01 - 03 July 2013, Delft, The Netherlands.
Huo, B. Y. & D'Mello, C. (2013). Push-out tests and analytical study of shear transfer mechanisms in composite shallow cellular floor beams. Journal of Constructional Steel Research, 88, pp. 191-205. doi: 10.1016/j.jcsr.2013.05.007
Jahromizadeh, Soroush (2013). Joint rate control and scheduling for providing bounded delay with high efficiency in multihop wireless networks. (Unpublished Doctoral thesis, City University London)
Jeshani, M. (2013). Optical characterisation of cavitating flows in diesel fuel injection equipment. (Unpublished Doctoral thesis, City University London)
Kabir, S., Rahman, B. M., Agrawal, A. & Grattan, K. T. V. (2013). Elimination of numerical dispersion from electromagnetic time domain analysis by using resource efficient finite element technique. Progress in Electromagnetics Research, 137, pp. 487-512. doi: 10.2528/pier13012305
Kantartzis, P., Abdi, M. & Liatsis, P. (2013). Stimulation and measurement patterns versus prior information for fast 3D EIT: A breast screening case study. Signal Processing, 93(10), pp. 2838-2850. doi: 10.1016/j.sigpro.2012.06.027
Kanthou, C., Dachs, G. U., Lefley, D. V. , Reyes-Aldasoro, C. C. & English, W. R. (2013). Endogenous VEGF isoform expression regulates tumour cell motility. In: http://conference.ncri.org.uk/abstracts/2013/abstracts/B154.htm. 2013 NCRI Cancer Conference, 03-11-2013 - 06-11-2013, Liverpool, UK.
Kaparias, I., Bell, M. G. H., Dong, W. , Sastrawinata, A., Singh, A., Wang, X. & Mount, B. (2013). Analysis of pedestrian-vehicle traffic conflicts in street designs with elements of shared space. Transportation Research Record, 2393, pp. 21-30. doi: 10.3141/2393-03
Kaparias, I., Bell, M. G. H., Singh, A. , Dong, W., Sastrawinata, A., Wang, X. & Mount, B. (2013). Analysing the perceptions and behaviour of cyclists in street environments with elements of shared space. Paper presented at the 45th Annual Conference of the Universities’ Transport Study Group, January 2013, Oxford, UK.
Kappos, A. J. (2013). Seismic Vulnerability and Loss Assessment for Buildings in Greece. In: Gueguen, P. (Ed.), Seismic Vulnerability of Structures. (pp. 111-159). Wiley-ISTE. doi: 10.1002/9781118603925.ch3
Kappos, A. J. & Kouris, L.A.S. (2013). Derivation of fragility curves for traditional timber-framed masonry buildings using nonlinear static analysis. Paper presented at the 4th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, COMPDYN 2013, 12-14 June 2013, Kos Island, Greece.
Kappos, A. J., Paraskeva, T. S. & Moschonas, I. F. (2013). Response Modification Factors for Concrete Bridges in Europe. Journal of Bridge Engineering, 18(12), pp. 1328-1335. doi: 10.1061/(asce)be.1943-5592.0000487
Karathanassis, I. K., Papanicolaou, E., Belessiotis, V. & Bergeles, G. (2013). Effect of secondary flows due to buoyancy and contraction on heat transfer in a two-section plate-fin heat sink. International Journal of Heat and Mass Transfer, 61(1), pp. 583-597. doi: 10.1016/j.ijheatmasstransfer.2013.02.028
Karathanassis, I. K., Papanicolaou, E., Belessiotis, V. & Bergeles, G. (2013). Multi-objective design optimization of a micro heat sink for Concentrating Photovoltaic/Thermal (CPVT) systems using a genetic algorithm. Applied Thermal Engineering, 59(1-2), pp. 733-744. doi: 10.1016/j.applthermaleng.2012.06.034
Karathanassis, I. K., Papanicolaou, E., Belessiotis, V. & Bergeles, G. (2013). Three-dimensional flow effects on forced convection heat transfer in a channel with stepwise-varying width. International Journal of Thermal Sciences, 67, pp. 177-191. doi: 10.1016/j.ijthermalsci.2012.12.016
Karcanias, N. (2013). Generalised resultants, dynamic polynomial combinants and the minimal design problem. International Journal of Control, 86(11), pp. 1946-1964. doi: 10.1080/00207179.2013.791402
Karcanias, N. (2013). Geometric and algebraic properties of minimal bases of singular systems. International Journal of Control, 86(11), pp. 1924-1945. doi: 10.1080/00207179.2013.816869
Karcanias, N. (2013). Properties and Classification of Generalized Resultants and Polynomial Combinants. 2013 21st Mediterranean Conference on Control & Automation (MED), 22, pp. 788-793. doi: 10.1109/med.2013.6608813
Karcanias, N. (2013). Systems of Systems: A Control Theoretic View. 2013 IEEE International Conference on Systems, Man, and Cybernetics (SMC),, 18, pp. 1732-1737. doi: 10.1109/smc.2013.298
Karcanias, N. & Halikias, G. (2013). Approximate zero polynomials of polynomial matrices and linear systems. Linear Algebra and its Applications, 439(4), 1091-1103.. doi: 10.1016/j.laa.2012.12.027
Karcanias, N., Leventides, J. & Meintanis, I. (2013). Parameterisation of degenerate solutions of the determinantal assignment problem. System, Structure and Control, 5(1), pp. 516-521. doi: 10.3182/20130204-3-FR-2033.00100
Karcanias, N. & Limebeeer, D. J. N. (2013). Special Issue dedicated to Sir Alistair G. J. MacFarlane. International Journal of Control, 86(11), pp. 1899-1902. doi: 10.1080/00207179.2013.858831
Kassanos, P., Triantis, I. & Demosthenous, A. (2013). A CMOS Magnitude/Phase Measurement Chip for Impedance Spectroscopy. IEEE Sensors Journal, 13(6), pp. 2229-2236. doi: 10.1109/jsen.2013.2251628
Kewlani, G., Vogiatzaki, K., Shanbhogue, S. & Ghoniem, A. F. (2013). Validation study of large-eddy simulations of wake stabilized reacting flows using artificial flame thickening approaches. 51st AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition 2013, doi: 10.2514/6.2013-169
Khan, S. & Finkelstein, L. (2013). Mathematical modelling in the analysis and design of hard and soft measurement systems. Measurement, 46(8), pp. 2936-2941. doi: 10.1016/j.measurement.2013.04.045
Kim, S., Yan, Y., Nouri, J. M. & Arcoumanis, C. (2013). Effects of intake flow and coolant temperature on the spatial fuel distribution in a direct-injection gasoline engine by PLIF technique. Fuel, 106, pp. 737-748. doi: 10.1016/j.fuel.2012.10.002
Kiskiras, J., Jaimoukha, I. M. & Halikias, G. (2013). An explicit state-space approach to the one-block super-optimal distance problem. Mathematics of Control, Signals and Systems, 25(2), pp. 167-196. doi: 10.1007/s00498-012-0097-8
Kovacevic, A. & Rane, S. (2013). 3D CFD analysis of a twin screw expander. In: 8th International Conference on Compressors and their Systems. (pp. 417-429). Cambridge: Woodhead Publishing.
Kovacevic, A. & Stosic, N. (2013). Grid Generation for Screw Compressors with Variable Geometry Rotors. International Journal of Aerospace and Lightweight Structures, 3(2), doi: 10.3850/s2010428613000603
Kyriacou, P. A. (2013). Direct pulse oximetry within the esophagus, on the surface of abdominal viscera, and on free flaps. Anesthesia & Analgesia, 117(4), pp. 824-833. doi: 10.1213/ane.0b013e3182a1bef6
Kyriacou, P. A., Hickey, M. & Phillips, J. P. (2013). Pulse oximetry of body cavities and organs. Proceedings of 35th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), pp. 2664-2667. doi: 10.1109/EMBC.2013.6610088
Kyriacou, P. A., Hickey, M. & Phillips, J. P. (2013). Pulse oximetry of body cavities and organs. Paper presented at the 35th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), 03-07-2013 - 07-07-2013, Osaka, Japan. doi: 10.1109/EMBC.2013.6610088
Kyriacou, P. A. & May, J.M. (2013). Esophageal SpO2 measurements from a pediatric burns-patient: A case study. Paper presented at the The 35th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC’13), 03-07-2013 - 07-07-2013, Osaka, Japan. doi: 10.1109/EMBC.2013.6609854
Kyriacou, P. A., May, J.M. & Petros, A. J. (2013). Esophageal SpO2 measurements from a pediatric burns-patient: A case study. 35th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), 2013, pp. 1732-1735. doi: 10.1109/EMBC.2013.6609854
Labib, M., Moslehy, Y. & Ayoub, A. (2013). Behavior of Reinforced Concrete Membrane Elements Subjected to Bidirectional Shear Loads. ACI Structural Journal, 110(6), pp. 1033-1043.
Leung, David (2013). Characterisation of silicon photonics devices. (Unpublished Doctoral thesis, City University London)
Leventides, J., Petroulakis, G. & Karcanias, N. (2013). Approximate solutions of the determinantal assignment problem and distance problems. System, Structure and Control, 46(2), pp. 605-610. doi: 10.3182/20130204-3-fr-2033.00097
Lockett, R. D., Ball, D. & Robertson, G. (2013). Experimental cross-correlation Nitrogen Q-branch CARS Thermometry in a Spark Ignition Engine. Optics and Lasers in Engineering, 51(7), pp. 929-943. doi: 10.1016/j.optlaseng.2013.02.010
Lockett, R. D., Liverani, L., Thaker, D. , Jeshani, M. & Tait, N. P. (2013). The characterisation of diesel nozzle flow using high speed imaging of elastic light scattering. Fuel, 106, pp. 605-616. doi: 10.1016/j.fuel.2012.10.065
Lungu, A. & Giaralis, A. (2013). A non-separable stochastic model for pulse-like ground motions. Paper presented at the 11th International Conference on Structural Safety and Reliability for Integrating Structural Analysis, Risk and Reliability, 16 - 20 June 2013, New York, USA.
Manu, P., Ankrah, N., Proverbs, D. & Suresh, S. (2013). Mitigating the health and safety influence of subcontracting in construction: The approach of main contractors. International Journal of Project Management, 31(7), pp. 1017-1026. doi: 10.1016/j.ijproman.2012.11.011
Marchi, A., Yan, Y., Nouri, J. M. & Arcoumanis, C. (2013). PIV Investigation on Flows Induced by Fuel Sprays from an Outwards Opening Pintle Injector for GDI engines. Paper presented at the ILASS 2013 - 25th Annual Conference on Liquid Atomization and Spray Systems, 1-4 Sept 2013, Chania, Crete.
Marian, L. & Giaralis, A. ORCID: 0000-0002-2952-1171 (2013). Optimal design of inerter devices combined with TMDs for vibration control of buildings exposed to stochastic seismic excitation. In: Deodatis, G., Ellingwood, B. R. & Frangopol, D. M. (Eds.), Safety, Reliability, Risk and Life-Cycle Performance of Structures and Infrastructures. (pp. 1025-1032). Boca Raton: CRC Press.
Marichal, N., Tomas-Rodriguez, M., Hernandez, A. , Castillo, S. & Campoy, P. (2013). Vibration reduction for vision systems on board UAV using a neuro-fuzzy controller. Journal of Vibration and Control, 20(15), pp. 1-12. doi: 10.1177/1077546313479632
Markides, C., Themistos, C., Tanvir, H. M. , Rahman, B. M. & Grattan, K. T. V. (2013). Multimode Interference 3 dB Splitters in Hollow Core Metallic Waveguides for Low-Loss THz Wave Transmission. IEEE Journal of Selected Topics in Quantum Electronics, 19(1), article number 8500606. doi: 10.1109/jstqe.2012.2215018
May, J.M., Kyriacou, P. A. & Petros, A. J. (2013). Pilot investigation of anterior fontanelle photoplethysmographic signals and their suitability in estimating arterial oxygen saturation. In: Conf Proc IEEE Eng Med Biol Soc. Engineering in Medicine and Biology Society (EMBC), 2013 35th Annual International Conference of the IEEE, 3 July - 7 July 2013, Osaka. doi: 10.1109/EMBC.2013.6610086
May, James (2013). Investigation of fontanelle photoplethysmographs and oxygen saturations in intensive care neonates and infants utilising miniature photometric sensors. (Unpublished Doctoral thesis, City University London)
McLorn, M.J (2013). Fundamental Behaviour of Valves Used in Diesel Fuel Injection Equipment. (Unpublished Doctoral thesis, City, University of London)
Mergos, P.E. (2013). The anchorage-slip effect on direct displacement-based design of R/C bridge piers for limiting material strains. Computers and Concrete, 11(6), pp. 493-513. doi: 10.12989/cac.2013.11.6.493
Mergos, P.E. & Kappos, A. J. (2013). Analytical study on the influence of distributed beam vertical loading on seismic response of frame structures. Earthquake and Structures, 5(2), pp. 239-259. doi: 10.12989/eas.2013.5.2.239
Mergos, P.E. & Kappos, A. J. (2013). Damage Analysis of Reinforced Concrete Structures with Substandard Detailing. In: Papadrakakis, M., Fragiadakis, M. & Plevris, V. (Eds.), Computational methods in earthquake engineering: Volume 2. Computational Methods in Applied Sciences, 30. (pp. 149-176). Springer. doi: 10.1007/978-94-007-6573-3_8
Mergos, P.E. & Kappos, A. J. (2013). A combined local damage index for seismic assessment of existing RC structures. Earthquake Engineering and Structural Dynamics, 42(6), pp. 833-852. doi: 10.1002/eqe.2247
Micic, T. (2013). Risk perception vs. risk reality. In: Deodatis,, G, Ellingwood, B & Frangopol, D (Eds.), CRC Press. 11th International Conference on Structural Safety and Reliability for Integrating Structural Analysis, Risk and Reliability, 16 - 20 June 2013, New York, USA.
Micic, T., Velimirovic, N. & Stojic, D. (2013). Stochastic process model for timber-concrete composite beam deterioration. Paper presented at the 11th International Conference on Structural Safety and Reliability, ICOSSAR 2013, 16-06-2013 - 20-06-2013, Columbia University, New York, USA.
Mikulich, V. & Brücker, C. (2013). Flow and motion behavior of particle suspensions in shear flow over a rough surface. WIT Transactions on Engineering Sciences, 79, pp. 263-272. doi: 10.2495/MPF130221
Milojevic, M. & Rakocevic, V. (2013). Short paper: Distributed vehicular traffic congestion detection algorithm for urban environments. In: IEEE Vehicular Networking Conference, VNC. 2013 IEEE Vehicular Networking Conference (VNC), 16th December - 18th December 2013, Boston, USA.
Mitroglou, N. & Gavaises, M. (2013). Mapping of cavitating flow regimes in injectors for medium-/heavy-duty diesel engines. International Journal of Engine Research, 14(6), pp. 590-605. doi: 10.1177/1468087413500491
Modi, C., Patel, D., Patel, H. , Borisaniya, B., Patel, A. & Rajarajan, M. (2013). A survey of intrusion detection techniques in Cloud. Journal of Network and Computer Applications, 36(1), pp. 42-57. doi: 10.1016/j.jnca.2012.05.003
Morar, N. ORCID: 0000-0001-9109-8864, Roy, R. ORCID: 0000-0001-5491-7437, Mehnen, J. , Redding, L. E. & Harrison, A. (2013). Data Mining and Knowledge Reuse for the Initial Systems Design and Manufacturing: Aero-engine Service Risk Drivers. In: Procedia CIRP. 2nd International Through-life Engineering Services Conference doi: 10.1016/j.procir.2013.08.002
Mullapudi, T. & Ayoub, A. (2013). Analysis of Reinforced Concrete Columns Subjected to Combined Axial, Flexure, Shear, and Torsional Loads. Journal of Structural Engineering, 139(4), pp. 561-573. doi: 10.1061/(asce)st.1943-541x.0000680
Mullapudi, T. & Ayoub, A. (2013). Non-linear analysis of reinforced concrete walls under three-dimensional loading. Magazine of Concrete Research, 65(3), pp. 172-184. doi: 10.1680/macr.12.00038
Njoum, H. & Kyriacou, P. A. (2013). Investigation of finger reflectance photoplethysmography in volunteers undergoing a local sympathetic stimulation. Journal of Physics: Conference Series, 450(1), article number 012012. doi: 10.1088/1742-6596/450/1/012012
O'Sullivan, C., Cavarretta, I., Fonseca, J. ORCID: 0000-0002-7654-6005 & Altuhafi, F. (2013). Quantitative Evaluation of Particle Morphology. Paper presented at the Workshop on Experimental Micromechanics for Geomaterials (ISSMGE TC101-TC105), 23-5-2013 - 24-5-2013, Hong Kong.
Olteanu Raimond, A. M., Xiao, Y., Liu, J. , Chen, T. & Chen, C. L. P. (2013). Nonintrusive tracing in the Internet. Security and Communication Networks, 6(7), pp. 833-843. doi: 10.1002/sec.616
Omidyeganeh, M. & Piomelli, U. (2013). Large-eddy simulation of three-dimensional dunes in a steady, unidirectional flow. Part 1. Turbulence statistics. Journal of Fluid Mechanics, 721, pp. 454-483. doi: 10.1017/jfm.2013.36
Omidyeganeh, M. & Piomelli, U. (2013). Large-eddy simulation of three-dimensional dunes in a steady, unidirectional flow. Part 2. Flow structures. Journal of Fluid Mechanics, 734, pp. 509-534. doi: 10.1017/jfm.2013.499
Omidyeganeh, M., Piomelli, U., Christensen, K.T. & Best, J.L. (2013). Large eddy simulation of interacting barchan dunes in a steady, unidirectional flow. JOURNAL OF GEOPHYSICAL RESEARCH-EARTH SURFACE, 118(4), pp. 2089-2104. doi: 10.1002/jgrf.20149
Ous, T. & Arcoumanis, C. (2013). Degradation aspects of water formation and transport in Proton Exchange Membrane Fuel Cell: A review. Journal of Power Sources, 240, pp. 558-582. doi: 10.1016/j.jpowsour.2013.04.044
Pagani, A., Boscolo, M., Banerjee, J. R. & Carrera, E. (2013). Exact dynamic stiffness elements based on one-dimensional higher-order theories for free vibration analysis of solid and thin-walled structures. Journal of Sound and Vibration, 332(23), pp. 6104-6127. doi: 10.1016/j.jsv.2013.06.023
Pal, A., Dhar, A., Sen, R. , Ams, M., Sun, T. & Grattan, K. T. V. (2013). Radiation resistant optical fiber for FBG based sensing. In: WRAP 2013 - Workshop on Recent Advances in Photonics. 2013 Workshop on recent Advances in Photonics (WRAP), 17-12-2013 - 18-12-2013, New Delhi, India. doi: 10.1109/WRAP.2013.6917688
Pal, Atasi (2013). Thulium-doped fibre laser in the 2 μm wavelength region for gas sensing. (Unpublished Doctoral thesis, City University London)
Pantelous, Athanasios (2013). Solutions Properties and Techniques for Implicit Systems. (Unpublished Doctoral thesis, City University London)
Papanikolaou, V.K., Stefanidou, S.P. & Kappos, A. J. (2013). The effect of preloading on the strength of jacketed R/C columns. Construction and Building Materials, 38, pp. 54-63. doi: 10.1016/j.conbuildmat.2012.07.100
Pascu, M., Heiyanthuduwage, M. A., Mounoury, S. , Cooke, G.M.E. & Kovacevic, A. (2013). A study on the influence of the suction arrangement on the performance of twin screw compressors. In: ASME 2013 International Mechanical Engineering Congress and Exposition. Fluids Engineering Systems and Technologies, 7 A. . American Society of Mechanical Engineers (ASME). doi: 10.1115/IMECE2013-62391
Phillips, J. P., Belhaj, A., Langford, R. M. & Kyriacou, P. A. (2013). Effect of respiratory-induced intensity variations on finger SpO(2) measurements in volunteers. 2013 35th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), pp. 3937-3940. doi: 10.1109/EMBC.2013.6610406
Phillips, J. P., Belhaj, A., Langford, R. M. & Kyriacou, P. A. (2013). Effect of respiratory-induced intensity variations on finger SpO2 measurements in volunteers. Paper presented at the 35th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC’13), 03-07-2013 - 07-07-2013, Osaka, Japan. doi: 10.1109/EMBC.2013.6610406
Phillips, J. P., Cibert-Goton, V., Langford, R. M. & Shortland, P. J. (2013). Perfusion assessment in rat spinal cord tissue using photoplethysmography and laser Doppler flux measurements. Journal of Biomedical Optics, 18(3), article number 037005. doi: 10.1117/1.jbo.18.3.037005
Preziosi, Marie-Christine (2013). The probabilistic assessment of small homogeneous UK earthfill dams affected by climate change; Precipitation. (Unpublished Doctoral thesis, City University London)
Qassem, M. & Kyriacou, P. A. (2013). Comparing the rates of absorption and weight loss during a desorption test using near infrared spectroscopy. Skin Research and Technology, 19(2), pp. 137-144. doi: 10.1111/srt.12024
Qassem, M. & Kyriacou, P. A. (2013). In vivo optical investigation of short term skin water contact and moisturizer application using NIR spectroscopy. In: Conf Proc IEEE Eng Med Biol Soc. Engineering in Medicine and Biology Society (EMBC), 2013 35th Annual International Conference of the IEEE, 3 July - 7 July 2013, Osaka. doi: 10.1109/EMBC.2013.6610020
Qassem, M. & Kyriacou, P. A. (2013). In vivo optical investigation of short term skin water contact and moisturizer application using NIR spectroscopy. Paper presented at the 35th Annual International Conference of the IEEE Engineering-in-Medicine-and-Biology-Society (EMBS), 2013, 03-07-2013 - 07-07-2013, Osaka, Japan. doi: 10.1109/EMBC.2013.6610020
Qureshi, H. K., Rizvi, S., Saleem, M. , Khayam, S. A., Rakocevic, V. & Rajarajan, M. (2013). Evaluation and improvement of CDS-based topology control for wireless sensor networks. Wireless Networks, 19(1), pp. 31-46. doi: 10.1007/s11276-012-0449-9
Rahman, B. M. & Agrawal, A. (2013). Introduction. In: Rahman, B. M. & Agrawal, A. (Eds.), Finite Element Modeling Methods for Photonics. (pp. 1-19). London, UK: Artech House.
Rahman, B. M., Themistos, C., Tanvir, H. M. , Uthman, M., Quadir, A. & Markides, C. (2013). Low-loss Waveguides for THz Guidance and Devices. Proceedings of SPIE, 8624, article number 862414. doi: 10.1117/12.2008201
Rahman, B. M., Uthman, M., Quadir, A. , Kejalakshmy, N., Markides, C. & Themistos, C. (2013). Low-loss Waveguides and Devices for Compact THz Systems. Proceedings of SPIE, 8716, article number 87160R. doi: 10.1117/12.2017622
Rahulamathavan, Y., C.-W. Phan, R., Veluru, S. , Cumanan, K & Rajarajan, M. (2013). Privacy-Preserving Multi-Class Support Vector Machine for Outsourcing the Data Classification in Cloud. IEEE Transactions on Dependable and Secure Computing, 11(5), pp. 467-479. doi: 10.1109/tdsc.2013.51
Rane, S., Kovacevic, A., Stosic, N. & Kethidi, M. (2013). CFD grid generation and analysis of screw compressor with variable geometry rotors. In: 8th International Conference on Compressors and their Systems. (pp. 601-612). Cambridge: Woodhead Publishing.
Rane, S., Kovacevic, A., Stosic, N. & Kethidi, M. (2013). Grid deformation strategies for CFD analysis of screw compressors. International Journal of Refrigeration, 36(7), pp. 1883-1893. doi: 10.1016/j.ijrefrig.2013.04.008
Raoufi, N., Surre, F., Rajarajan, M. , Sun, T. & Grattan, K. T. V. (2013). Fibre Optic pH Sensor Using Optimized Layer-by-Layer Coating Approach. IEEE Sensors Journal, 14(1), pp. 47-54. doi: 10.1109/JSEN.2013.2280283
Revestido Herrero, E., Tomas-Rodriguez, M. & Gonzalez, F. J. V. (2013). Iterated Nonlinear Control of Ship's Manoeuvring Models. 2013 IEEE 52nd Annual Conference on Decision and Control (CDC), 16, pp. 6168-6175. doi: 10.1109/cdc.2013.6760864
Reyes-Aldasoro, C. C. (2013). Cancer Image Analysis. Oncology News, 8(5), pp. 158-160.
Riziotis, V. A., Katsaounis, G. M., Papadakis, G. , Voutsinas, S. G., Bergeles, G. & Tzabiras, G. D. (2013). Numerical and experimental analysis of the hydroelastic behavior of purse seine nets. Ocean Engineering, 58, pp. 88-105. doi: 10.1016/j.oceaneng.2012.09.022
Rose, A.V., Taylor, R.N. & El Naggar, M. H. (2013). Numerical modelling of perimeter pile groups in clay. Canadian Geotechnical Journal, 50(3), pp. 250-258. doi: 10.1139/cgj-2012-0194
Rybynok, V. & Kyriacou, P. A. (2013). Theory of Dynamic Pulsatile Spectroscopy for photoplethysmographic signals analysis. 35th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), 2013, pp. 2652-2655. doi: 10.1109/EMBC.2013.6610085
Rybynok, V. & Kyriacou, P. A. (2013). Theory of dynamic pulsatile spectroscopy for photoplethysmographic signals analysis. Paper presented at the 35th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBS), 2013, 3-7 Jul 2013, Osaka, Japan. doi: 10.1109/EMBC.2013.6610085
Rybynok, V., May, J.M., Budidha, K. & Kyriacou, P. A. (2013). Design and Development of a novel Multi-channel Photoplethysmographic Research System. In: 2013 IEEE Point-of-Care Healthcare Technologies (PHT). (pp. 267-270). IEEE. doi: 10.1109/PHT.2013.6461336
Rybynok, V., May, J.M., Budidha, K. & Kyriacou, P. A. (2013). Design and development of a novel multi-channel photoplethysmographic research system. Paper presented at the 35th Annual International Conference of the IEEE Engineering-in-Medicine-and-Biology-Society (EMBS), 2013, 03-07-2013 - 07-07-2013, Osaka, Japan.
Sanchez, T., Dennis, R. & Pullen, K. R. (2013). Cooking and lighting habits in rural Nepal and Uganda. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 227(7), pp. 727-739. doi: 10.1177/0957650913498872
Scott, R.H., Banerji, P., Chikermane, S. , Srinivasan, S., Basheer, P.A.M., Surre, F., Sun, T. & Grattan, K. T. V. (2013). Commissioning and Evaluation of a Fiber-Optic Sensor System for Bridge Monitoring. IEEE Sensors Journal, 13(7), pp. 2555-2562. doi: 10.1109/jsen.2013.2256599
Seward, L. J., Stallebrass, S. E. & Skipper, J. (2013). Remoulding of the Mercia Mudstone Group around CFA pile shafts. Quarterly Journal of Engineering Geology and Hydrogeology, 46(1), pp. 41-51. doi: 10.1144/qjegh2011-053
Skrekas, P. & Giaralis, A. (2013). Influence of near-fault effects and of incident angle of earthquake waves on the seismic inelastic demands of a typical Jack-Up platform. Paper presented at the 14th International Conference: The Jack-Up Platform Design, Construction & Operation, 17 - 18 September 2013, London.
Skupsch, C. & Brücker, C. (2013). Multiple-plane particle image velocimetry using a light-field camera. Optics Express, 21(2), pp. 1726-1740. doi: 10.1364/oe.21.001726
Soltani, M. R., Masdari, M. ORCID: 0000-0002-1159-2406 & Damghani, H. (2013). Experimental investigation of leading-edge roughness effects on stationary crossflow instability of a swept wing. Scientia Iranica, 20(3), pp. 524-534. doi: 10.1016/j.scient.2013.01.006
Spanos, P. D. & Giaralis, A. (2013). Third-order statistical linearization-based approach to derive equivalent linear properties of bilinear hysteretic systems for seismic response spectrum analysis. Structural Safety, 44, pp. 59-69. doi: 10.1016/j.strusafe.2012.12.001
Spurgin, Anthony (2013). Application of cybernetic models in the study of safety and economics of nuclear power systems and other high risk organizations: A study of nuclear power and high risk organizations to understand the central role of management in the safety and economics of these operations. (Unpublished Doctoral thesis, City University London)
Stankovic, S. B. & Kyriacou, P. A. (2013). Improved measurement technique for the characterization of organic and inorganic phase change materials using the T-history method. Applied Energy, 109, pp. 433-440. doi: 10.1016/j.apenergy.2013.01.079
Stosic, N., Smith, I. K., Chukanova, E. & Kovacevic, A. (2013). Experimental Investigation and Numerical Modelling of Dynamic Behaviour of Screw Compressor Plant. Universal Journal of Engineering Science, 1(3), pp. 68-79. doi: 10.13189/ujes.2013.010302
Sun, H., Xu, H., Meskarian, R. & Wang, Y. (2013). Exact penalization, level function method, and modified cutting-plane method for stochastic programs with second order stochastic dominance constraints. SIAM Journal on Optimization (SIOPT), 23(1), pp. 602-631. doi: 10.1137/110850815
Surre, F., Sun, T. & Grattan, K. T. V. (2013). Fiber Optic Strain Monitoring for Long-Term Evaluation of a Concrete Footbridge Under Extended Test Conditions. IEEE Sensors Journal, 13(3), pp. 1036-1043. doi: 10.1109/jsen.2012.2234736
Tomas-Rodriguez, M. & Banks, S. P. (2013). An iterative approach to eigenvalue assignment for nonlinear systems. International Journal of Control, 86(5), pp. 883-892. doi: 10.1080/00207179.2013.765037
Trozzi, V., Gentile, G., Bell, M. G. H. & Kaparias, I. (2013). Dynamic user equilibrium in public transport networks with passenger congestion and hyperpaths. Transportation Research Part B: Methodological, 57, pp. 266-285. doi: 10.1016/j.trb.2013.06.011
Trozzi, V., Kaparias, I., Bell, M. G. H. & Gentile, G. (2013). A dynamic route choice model for public transport networks with boarding queues. Transportation Planning and Technology, 36(1), pp. 44-61. doi: 10.1080/03081060.2012.745720
Tsavdaridis, K. D., D'Mello, C. & Huo, B. Y. (2013). Experimental and computational study of the vertical shear behaviour of partially encased perforated steel beams. Engineering Structures, 56, pp. 805-822. doi: 10.1016/j.engstruct.2013.04.025
Ueberall, C., Koehnen, C., Rakocevic, V. , Jaeger, R., Hoy, E. & Rajarajan, M. (2013). Recommendations in a heterogeneous service environment. Multimedia Tools and Applications, 62(3), pp. 785-820. doi: 10.1007/s11042-011-0874-2
Uthman, Muhammad (2013). Finite element characterisation of photonic crystal fibres. (Unpublished Doctoral thesis, City University London)
Viphavakit, C., Themistos, C., Komodromos, M. , Kalli, K., Quadir, A. & Rahman, B. M. (2013). Dispersion characteristics of plasmonic waveguides for THz waves. Proceedings of SPIE, 8775, article number 87750J. doi: 10.1117/12.2021785
Wijeratne, I. (2013). Second harmonic generation in novel optical waveguides. (Unpublished Doctoral thesis, City University London)
Wijeratne, I., Kejalakshmy, N., Rahman, B. M. & Grattan, K. T. V. (2013). Rigorous Full-Vectorial Beam Propagation Analysis of Second-Harmonic Generation in Zinc Oxide Waveguides. IEEE Photonics Journal, 5(2), article number 6100112. doi: 10.1109/jphot.2013.2256115
Wren, S., Nguyen, T.H., Gascoine, P. , Lacey, D., Sun, T. & Grattan, K. T. V. (2013). Preparation of a novel drug sensor using a molecular imprinted polymer approach. Proceedings of SPIE - The International Society for Optical Engineering, 8794, article number 879417. doi: 10.1117/12.2025839
Zaman, T. (2013). Optical sensors for the in vivo assessment of flap perfusion in plastic surgery. (Unpublished Doctoral thesis, City University London)
Zaman, T., Kyriacou, P. A. & Pal, S. (2013). Free flap pulse oximetry utilizing reflectance photoplethysmography. Paper presented at the 35th Annual International Conference of the IEEE Engineering-in-Medicine-and-Biology-Society (EMBS), 2013, 03-07-2013 - 07-07-2013, Osaka, Japan. doi: 10.1109/EMBC.2013.6610433
Zaman, T., Kyriacou, P. A. & Pal, S. (2013). Free flap pulse oximetry utilizing reflectance photoplethysmography. 35th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), pp. 4046-4049. doi: 10.1109/EMBC.2013.6610433
Zaman, T., Pal, P. K. & Kyriacou, P. A. (2013). Pilot investigation of DIEP free flap perfusion utilising a multi-wavelength non-invasive optical sensor. British Journal of Anaesthesia, 110(5), 860P-885P. doi: 10.1093/bja/aes490
Zhang, Q. & He, L. (2013). Tip-shaping for HP turbine blade aerothermal performance management. Journal of Turbomachinery, 135(5), doi: 10.1115/1.4007896
Zheng, H., Dodd, S. J., Dissado, L. A. , Fothergill, J., Allais, A. & Kebbabi, L. (2013). Feasibility of using a flat bottom electrode for PEA space charge measurement on mini-cables under high temperatures. 2013 IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP), pp. 1109-1112. doi: 10.1109/CEIDP.2013.6748261
Zheng, H., Dodd, S. J., Dissado, L. A. , Fothergill, J., Allais, A. & Kebbabi, L. (2013). A system for PEA space charge measurement on HVDC mini-cables under different isothermal temperatures: Influence of cable clamping force on PEA measurements on HVDC mini-cables. Proceedings of IEEE International Conference on Solid Dielectrics, ICSD, pp. 476-479. doi: 10.1109/icsd.2013.6619855
Zhou, Liangchen (2013). The aerodynamic and structural study of flapping wing vehicles. (Unpublished Doctoral thesis, City University London)
Zifan, A., Liatsis, P. & Chapman, B. E. (2013). The use of the Kalman filter in the automated segmentation of EIT lung images. Physiological Measurement, 34(6), pp. 671-694. doi: 10.1088/0967-3334/34/6/671
2012
Abdelmalik, A. A., Fothergill, J. & Dodd, S. J. (2012). Electrical Conduction and Dielectric Breakdown Characteristics of Alkyl Ester Dielectric Fluids obtained from Palm Kernel Oil. IEEE Transactions on Dielectrics and Electrical Insulation, 19(5), pp. 1623-1632. doi: 10.1109/tdei.2012.6311509
Agrawal, A., Kejalakshmy, N., Uthman, M. , Rahman, B. M., Kumar, A. & Grattan, K. T. V. (2012). Ultra low bending loss equiangular spiral photonic crystal fibers in the terahertz regime. AIP Advances, 2, article number 022140. doi: 10.1063/1.4726055
Aqida, S.N, Brabazon, D. & Naher, S. (2012). An investigation of phase transformation and crystallinity in laser surface modified H13 steel. Applied Physics A: Materials Science & Processing, 110(3), pp. 673-678. doi: 10.1007/s00339-012-7149-2
Aqida, S.N., Brabazon, D. & Naher, S. (2012). Atomic diffusion in laser surface modified AISI H13 steel. Applied Physics A: Materials Science & Processing, 112(1), pp. 139-142. doi: 10.1007/s00339-012-7214-x
Atkin, C. J. & Gowree, E. R. (2012). Recent Developlments to the viscous Garabedian and Korn method. Paper presented at the 28th Congress of the International Council of the Aeronautical Sciences, 23-28 Sep 2012, Brisbane, Australia.
Barh, A., Pal, B. P., Varshney, R. K. & Rahman, B. M. (2012). Design of a compact SOI polarization rotator for mid-IR application. CODEC 2012 - 5th International Conference on Computers and Devices for Communication, 22, pp. 1-4. doi: 10.1109/codec.2012.6509320
Bauer, D., Chaves, H. & Arcoumanis, C. (2012). Measurements of void fraction distribution in cavitating pipe flow using x-ray CT. Measurement Science and Technology, 23(5), article number 55302. doi: 10.1088/0957-0233/23/5/055302
Bhalerao, A., Pase, L., Lieschke, G. J. , Renshaw, S. A. & Reyes-Aldasoro, C. C. (2012). Local affine texture tracking for serial registration of zebrafish images. In: ISBI. 2012 9th IEEE International Symposium on Biomedical Imaging (ISBI), 02-05-2012-05-05-2012, Barcelona, Spain. doi: 10.1109/ISBI.2012.6235577
Boscolo, M. & Banerjee, J. R. (2012). Dynamic stiffness formulation for composite Mindlin plates for exact modal analysis of structures. Part I: Theory. Computers & Structures, 96-97, pp. 61-73. doi: 10.1016/j.compstruc.2012.01.002
Boscolo, M. & Banerjee, J. R. (2012). Dynamic stiffness formulation for composite Mindlin plates for exact modal analysis of structures. Part II: Results and applications. Computers & Structures, 96-97, pp. 74-83. doi: 10.1016/j.compstruc.2012.01.003
Camara, A. & Astiz, M. A. (2012). Pushover analysis for the seismic response prediction of cable-stayed bridges under multi-directional excitation. Engineering Structures, 41, pp. 444-455. doi: 10.1016/j.engstruct.2012.03.059
Chalashkanov, N. M., Dodd, S. J. & Fothergill, J. (2012). Influence of water absorption in flexible epoxy resins on the space charge behaviour. Paper presented at the IEEE Conference on Electrical Insulation and Dielectric Phenomena, 14 - 17 October 2012, Montréal, Canada.
Chalashkanov, N. M., Dodd, S. J. & Fothergill, J. (2012). Limitations of Kramers-Kronig transform for calculation of the DC conductance magnitude from dielectric measurements. Paper presented at the IEEE Conference on Electrical Insulation and Dielectric Phenomena, 14 - 17 October 2012, Montréal, Canada.
Chikarakara, E., Naher, S. & Brabazon, D. (2012). High speed laser surface modification of Ti-6Al-4V. Surface and Coatings Technology, 206(14), pp. 3223-3229. doi: 10.1016/j.surfcoat.2012.01.010
Couppis, A., Damianou, C., Kyriacou, P. A. , Lafon, C., Chavrier, F., Chapelon, J-Y. & Birer, A. (2012). Heart ablation using a planar rectangular high intensity ultrasound transducer and MRI guidance. Ultrasonics, 52(7), pp. 821-829. doi: 10.1016/j.ultras.2012.03.010
Danilova, N. & Stupples, D. (2012). Application of Natural Language Processing and Evidential Analysis to Web-Based Intelligence Information Acquisition. Intelligence and Security Informatics Conference (EISIC), Proceedings, 2, pp. 268-273. doi: 10.1109/eisic.2012.41
Degirmenci, E., Surre, F., Philippe, S. , Maldonado-Basilio, R. & Landais, P. (2012). Improved Bend Waveguide Design for Terahertz Transmission. IEEE Transactions on Terahertz Science and Technology, 2(1), pp. 137-143. doi: 10.1109/tthz.2011.2177170
Divall, S. & Goodey, R.J. (2012). Apparatus for centrifuge modelling of twin-tunnel construction. INTERNATIONAL JOURNAL OF PHYSICAL MODELLING IN GEOTECHNICS, 12(3), pp. 102-111. doi: 10.1680/ijpmg.11.00014
Divall, S. & Goodey, R.J. (2012). Novel apparatus for generating ground movements around sequential twin tunnels in over-consolidated clay. Online publication by Proceedings of the ICE - Geotechnical Engineering, pp. 10-11.
Eden, N., Tsakarestos, A., Kaparias, I. , Gal-Tzur, A., Schmitz, P., Hauptmann, S. & Hoadley, S. (2012). Using Key Performance Indicators for traffic management and Intelligent Transport Systems as a prediction tool. Paper presented at the 19th ITS World Congress, 22 - 26 October 2012, Vienna, Austria.
Fu, F. ORCID: 0000-0002-9176-8159 (2012). Response of a multi-storey steel composite building with concentric bracing under consecutive column removal scenarios. Journal of Constructional Steel Research, 70, pp. 115-126. doi: 10.1016/j.jcsr.2011.10.012
Gavaises, E., Theodorakakos, A. & Mitroglou, N. (2012). Simulation of heating effects caused by extreme fuel pressurisation in cavitating flows through Diesel fuel injectors. In: CAV2012 – Submission No. 216. 8th International Symposium on Cavitation, 13 - 16 Aug 2012, Singapore.
Giaralis, A. ORCID: 0000-0002-2952-1171 & Lungu, A. (2012). Assessment of wavelet-based representation techniques for the characterization of stochastic processes modelling pulse-like strong ground motions. Paper presented at the 6th International ASRANet Conference, 02 - 04 July 2012, Croydon, London, UK.
Giaralis, A. & Spanos, P. D. (2012). Derivation of response spectrum compatible non-stationary stochastic processes relying on Monte Carlo-based peak factor estimation. Earthquakes and Structures, 3(3_4), pp. 581-609. doi: 10.12989/eas.2012.3.3_4.581
Glover, I. (2012). SCOF: A Standardised, Customisable Online Feedback Tool. In: Amiel, T. & Wilson, B. (Eds.), Proceedings of World Conference on Educational Multimedia, Hypermedia and Telecommunications 2012. (pp. 1805-1812). EdITLib.
Glover, I., Campbell, A., Latif, F. , Norris, L., Toner, J. & Tse, C. (2012). A tale of one city: intra-institutional variations in migrating VLE platform. Research in Learning Technology, 20(sup1), doi: 10.3402/rlt.v20i0.19190
Gorasia, R. J., McNamara, A. M. & Rettura, D. (2012). Reducing driving forces for pressed-in piles. Proceedings of the Institution of Civil Engineers - Geotechnical Engineering, 167(1), pp. 19-27. doi: 10.1680/geng.11.00084
Griffiths, M. K., Reyes-Aldasoro, C. C. & Rodenberg, J. M. (2012). A Framework for Providing Research Applications as a Service Using the IOME Toolkit. Paper presented at the Digital Research 2012, Oxford, 10-09-2012 - 12-09-2012, Oxford, UK.
Hadjichrysanthou, C. & Broom, M. (2012). When should animals share food? Game theory applied to kleptoparasitic populations with food sharing. Behavioral Ecology, 23(5), pp. 977-991. doi: 10.1093/beheco/ars061
Hadjisavvas, V. (2012). Treatment of brain cancer and ischaemic stroke utilising High Intensity Focus Ultrasound (HIFU) guide with MRI. (Unpublished Doctoral thesis, City University London)
Halikias, G., Dritsas, L., Pantelous, A. & Tsoulkas, V. (2012). Strong stability of discrete-time systems. Linear Algebra and its Applications, 436(7), pp. 1890-1908. doi: 10.1016/j.laa.2011.09.024
Hassani, V. ORCID: 0009-0003-0289-2890, Tjahjowidodo, T. & Soetarto, A. D. (2012). Modeling Hysteresis with Inertial-Dependent Prandtl-Ishlinskii Model in Wide-Band Frequency-Operated Piezoelectric Actuator. Smart Materials Research, 2012, doi: 10.1155/2012/164062
Henry, K. M., Reyes-Aldasoro, C. C. & Renshaw, S. A. (2012). Exploring neutrophil behaviour in a zebrafish model of inflammation through the generation of novel parameters using MatLab algorithms. In: http://ebooks.ekonnect.co/ECI%202012%20Final%20Programme/files/assets/basic-html/page235.html. European Congress of Immunology, 05-09-2012 - 08-09-2012, Glasgow, UK.
Hickey, M., Samuels, N., Randive, N. , Langford, R. M. & Kyriacou, P. A. (2012). A new fibre optic pulse oximeter probe for monitoring splanchnic organ arterial blood oxygen saturation. Computer Methods and Programs in Biomedicine, 29(3), pp. 387-390. doi: 10.1007/978-3-642-13039-7_97
Holmes, G. R., Dixon, G., Anderson, S. R. , Reyes-Aldasoro, C. C., Elks, P. M., Billings, S. A., Whyte, M., Kadirkamanathan, V. & Renshaw, S. A. (2012). Drift-Diffusion Analysis of Neutrophil Migration during Inflammation Resolution in a Zebrafish Model. Advances in Hematology, 2012, pp. 1-8. doi: 10.1155/2012/792163
Hu, J., Kaparias, I. & Bell, M. G. H. (2012). Current state and future outlook of traffic data fusion in London. Paper presented at the 15th International IEEE Conference on Intelligent Transportation Systems (ITSC), 16-09-2012 - 19-09-2012, Anchorage, Alaska, USA.
Huo, B. Y. (2012). Experimental and analytical study of the shear transfer in composite shallow cellular floor beams. (Unpublished Doctoral thesis, City University London)
Kadirkamanathan, V., Anderson, S. R., Billings, S. A. , Zhang, X., Holmes, G. R., Reyes-Aldasoro, C. C., Elks, P. M. & Renshaw, S. A. (2012). The neutrophil's eye-view: inference and visualisation of the chemoattractant field driving cell chemotaxis in vivo. PLoS One, 7(4), article number e35182. doi: 10.1371/journal.pone.0035182
Kanthou, C., Ghareai, Z., Haagen, J. , Lunt, S. J., Reyes-Aldasoro, C. C., Doeer, W. & Tozer, G. M. (2012). Inhibition of angiogenesis in the mouse heart by ionizing radiation. Paper presented at the AACR 103rd Annual Meeting, 31-03-2012 - 04-04-2012, Chicago IL.
Kaparias, I. & Bell, M. G. H. (2012). London Congestion Charging: Successes, Gaps and Future Opportunities Offered by Cooperative ITS. In: 2012 15TH INTERNATIONAL IEEE CONFERENCE ON INTELLIGENT TRANSPORTATION SYSTEMS (ITSC). 15th IEEE Conference on Intelligent Transportation Systems, 16-09-2012 - 19-09-2012, Anchorage, Alaska, USA.
Kaparias, I., Bell, M. G. H., Gosnall, E. , Abdul-Hamid, D., Dowling, M., Hemnani, I. & Mount, B. (2012). Assessing the pedestrian experience in public spaces. Paper presented at the 91st Annual Meeting of the Transportation Research Board, 22-26 Jan 2012, Washington, DC, USA.
Kaparias, I., Bell, M. G. H., Miri, A. , Chan, C. & Mount, B. (2012). Analysing the perceptions of pedestrians and drivers to shared space. Transportation Research Part F: Traffic Psychology and Behaviour, 15(3), pp. 297-310. doi: 10.1016/j.trf.2012.02.001
Kaparias, I., Eden, N., Tsakarestos, A. , Gal-Tzur, A., Gerstenberger, M., Hoadley, S., Lefebvre, P., Ledoux, J. & Bell, M. G. H. (2012). Development and application of an evaluation framework for urban traffic management and Intelligent Transport Systems. In: Procedia - Social and Behavioral Sciences. Transport Research Arena – Europe 2012, 23-04-2012 - 26-04-2012, Athens, Greece. doi: 10.1016/j.sbspro.2012.06.1276
Kappos, A. J., Gidaris, I.G. & Gkatzogias, K.I. (2012). Problems associated with direct displacement-based design of concrete bridges with single-column piers, and some suggested improvements. Bulletin of Earthquake Engineering, 10(4), pp. 1237-1266. doi: 10.1007/s10518-012-9354-y
Karcanias, N. & Vafiadis, D. (2012). Disturbance and Input-Output Decoupling of Systems. Automatica, 48(8), pp. 1650-1657. doi: 10.1016/j.automatica.2012.05.021
Karimi, M., Surre, F., Sun, T. , Grattan, K. T. V., Margulis, W. & Fonjallaz, P. (2012). Theoretical Analysis of a Non-Symmetric Polarization-Maintaining Single-Mode Fiber for Sensor Applications. Journal of Lightwave Technology, 30(3), pp. 362-367. doi: 10.1109/jlt.2011.2178589
Katritsis, D. G., Theodorakakos, A., Pantos, I. , Gavaises, M., Karcanias, N. & Efstathopoulos, E. P. (2012). Flow Patterns at Stented Coronary Bifurcations Computational Fluid Dynamics Analysis. Circulation: Cardiovascular Interventions, 5(4), pp. 530-539. doi: 10.1161/circinterventions.112.968347
Kearns, James (2012). Comparing the risks of diverse methods of electricity generation using the J-value framework. (Unpublished Doctoral thesis, City University London)
Kovacevic, A. & Kethidi, M. (2012). CFD Modeling in Screw Compressors with complex multi rotor configurations. Paper presented at the 21st International Compressor Engineering Conference, 16-19 Jul 2012, Indiana, USA.
Kumar, A., Rastogi, V., Agrawal, A. & Rahman, B. M. (2012). Birefringence analysis of segmented cladding fiber. Applied Optics, 51(15), pp. 3104-3108. doi: 10.1364/ao.51.003104
Kyriacou, P. A. (2012). Development and in vitro evaluation of an artificial spinal disc loading cell. 2012 Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), pp. 4887-4890. doi: 10.1109/EMBC.2012.6347089
Kyriacou, P. A. (2012). Development and in vitro evaluation of an artificial spinal disc loading cell. Paper presented at the 34th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), 28-08-2012 - 01-09-2012, San Diego, USA. doi: 10.1109/EMBC.2012.6347089
Kyriacou, P. A. (2012). Estimation of Venous oxygenation saturation using the finger Photoplethysmograph (PPG) waveform. Paper presented at the 34th Annual International Conference of the IEEE Engineering-in-Medicine-and-Biology-Society (EMBS), 28-08-2012 - 01-09-2012, San Diego, USA.
Kyriacou, P. A. & Shafqat, K. (2012). Heart Rate Variability (HRV) and cardiovascular dynamic changes during local anesthesia. In: Kamath, M.V., Watanabe, M.A. & Upton, A.R.M. (Eds.), Heart Rate Variability (HRV) Signal Analysis: Clinical Applications. (pp. 221-240). CRC Press.
Kyriacou, P. A. & Stankovic, S. B. (2012). Improved measurement technique for the characterisation of phase change materials using the T-history method. Paper presented at the 12th International Conference on Energy Storage (InnoStock 2012), 16-18 May 2012, Lleida, Spain.
Li, Y. & Sayma, A. I. (2012). Effects of blade damage on the performance of a transonic axial compressor rotor. Paper presented at the ASME Turbo Expo 2012: Turbine Technical Conference and Exposition, 11-06-2012 - 15-06-2012, Copenhagen, Denmark. doi: 10.1115/GT2012-68324
Marichal, N., Tomas-Rodriguez, M., Castillo Rivera, S. & Hernandez, A. (2012). Modelling and Analysis of Vibrations in a UAV Helicopter with a Vision System. International Journal of Advanced Robotic Systems, 9(5), 220-. doi: 10.5772/52761
May, J. M., Kyriacou, P. A., Honsel, M. & Petros, A. J. (2012). Photoplethysmographic and SpO(2) readings from the neonatal anterior fontanelle: a case study. Conference proceedings : ... Annual International Conference of the IEEE Engineering in Medicine and Biology Society. IEEE Engineering in Medicine and Biology Society., 2012, pp. 1619-1622. doi: 10.1109/EMBC.2012.6346255
May, J.M., Kyriacou, P. A., Honsel, M. & Petros, A. J. (2012). Photoplethysmographic and SpO2 readings from the neonatal anterior fontanelle: a case study. Paper presented at the 34th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), 28-08-2012 - 01-09-2012, San Diego, USA. doi: 10.1109/EMBC.2012.6346255
McNamara, A. M., Divall, S., Goodey, R.J. , Gorasia, Rohit J., Halai, H., Rose, A.V., Stallebrass, S. E., Taylor, R.N. & Xu, M. (2012). The London Geotechnical Centrifuge Centre at City University London. In: Delft – online publication by TU Delft Library. 2nd European Conference on Physical Modelling in Geotechnics, 23-04-2012 - 24-04-2012, Delft University of Technology, Netherlands. doi: 10.4233/uuid:72050299-d870-4da4-9465-01833a6ea70f
Mitolidis, G. J., Salonikios, T. N. & Kappos, A. J. (2012). Test results and strength estimation of R/C beams strengthened against flexural or shear failure by the use of SRP and CFRP. Composites Part B: Engineering, 43(3), pp. 1117-1129. doi: 10.1016/j.compositesb.2011.11.034
Mitolidis, G. J., Salonikios, T. N. & Kappos, A. J. (2012). Tests on RC Beams Strengthened at the Span with Externally Bonded Polymers Reinforced with Carbon or Steel Fibers. Journal of Composites for Construction, 16(5), pp. 551-562. doi: 10.1061/(asce)cc.1943-5614.0000281
Mitroglou, N., Gavaises, M. & Arcoumanis, D. (2012). Spray stability from VCO and a new diesel nozzle design concept. In: Fuel Systems for IC Engines. (pp. 279-290). UK: Elsevier. doi: 10.1533/9780857096043
Moschonas, I. F. & Kappos, A. J. (2012). Assessment of concrete bridges subjected to ground motion with an arbitrary angle of incidence: static and dynamic approach. Bulletin of Earthquake Engineering, 11(2), pp. 581-605. doi: 10.1007/s10518-012-9395-2
Mou, Z., Triantis, I., Woods, V. M. , Toumazou, C. & Nikolic, K. (2012). A simulation study of the combined thermoelectric extracellular stimulation of the sciatic nerve of the Xenopus laevis: the localized transient heat block. IEEE Transactions on Biomedical Engineering, 59(6), pp. 1758-1769. doi: 10.1109/tbme.2012.2194146
Mylonas, N. (2012). Development of positioning devices for MRI-guided high intensity focused ultrasound (HIFU) for abdominal, thyroid and brain, tumours. (Unpublished Doctoral thesis, City University London)
Nguyen, T.H., Hardwick, S., Sun, T. & Grattan, K. T. V. (2012). Intrinsic Fluorescence-Based Optical Fiber Sensor for Cocaine Using a Molecularly Imprinted Polymer as the Recognition Element. IEEE Sensors Journal, 12(1), pp. 255-260. doi: 10.1109/jsen.2011.2158537
Nouri, J. M., Mackenzie, S., Gaskell, C. & Dhunput, A. (2012). Effect of viscosity and temperature on in-nozzle flow and cavitation in a multi-hole injector. Paper presented at the Fuel Systems for IC Engines, 14-3-2012 - 15-3-2012, IMechE, London, England.
Nouri, J. M., Mackenzie, S., Gaskell, C. & Dhunput, A. (2012). Effect of viscosity, temperature and nozzle length-to-diameter ratio on internal flow and cavitation in a multi-hole injector. In: Fuel Systems for IC Engines. (pp. 265-278). Cambridge, UK: Woodhead Publishing. doi: 10.1533/9780857096043
Nucara, P. & Sayma, A. I. (2012). Effects of using Hydrogen-rich syngas in industrial gas turbines while maintaining fuel flexibility on a multistage axial compressor design. Paper presented at the ASME Turbo Expo 2012: Turbine Technical Conference and Exposition, 11-06-2012 - 15-06-2012, Copenhagen, Denmark.
Ous, T., Mujic, E. & Stosic, N. (2012). Experimental investigation on water injected twin screw compressor for fuel cell humidification. Proceedings of the Institution of Mechanical Engineers, Part C, Journal of Mechanical Engineering Science, 226(12), pp. 2925-2932. doi: 10.1177/0954406212438323
Pal, A., Sen, R., Bremer, K. , Yao, S., Lewis, E., Sun, T. & Grattan, K. T. V. (2012). "All-fiber" tunable laser in the 2 mu m region, designed for CO2 detection. Applied Optics, 51(29), pp. 7011-7015. doi: 10.1364/ao.51.007011
Panesar, Angad Singh (2012). A study of organic Rankine cycle systems with the expansion process performed by twin screw machines. (Unpublished Doctoral thesis, City University London)
Pantelous, A., Karcanias, N. & Halikias, G. (2012). Approximating distributional behaviour of LTI differential systems using Gaussian function and its derivatives. International Journal of Control, 85(7), pp. 830-841. doi: 10.1080/00207179.2012.667881
Pantelous, A.A., Karcanias, N. & Halikias, G. (2012). Approximating distributional behaviour of LTI differential systems using Gaussian function and its derivatives. Paper presented at the IFAC Symposium SSSC10, 15-17 Sep 2010, Ancona, Italy.
Pase, L., Layton, J. E., Wittmann, C. , Ellett, F., Nowell, C. J., Reyes-Aldasoro, C. C., Varma, S., Rogers, K. L., Hall, C. J., Keightley, M. C., Crosier, P. S., Grabher, C., Heath, J. K., Renshaw, S. A. & Lieschke, G. J. (2012). Neutrophil-delivered myeloperoxidase dampens the hydrogen peroxide burst after tissue wounding in zebrafish. Current Biology, 22(19), pp. 1818-1824. doi: 10.1016/j.cub.2012.07.060
Pawar, P. S., Rajarajan, M., Nair, S. K. & Zisman, A. (2012). Trust Model for Optimized Cloud Services. IFIP Advances in Information and Communication Technology, 374 AI, pp. 97-112. doi: 10.1007/978-3-642-29852-3_7
Phillips, J. P., Belhaj, A., Shafqat, K. , Langford, R. M., Shelley, K. H. & Kyriacou, P. A. (2012). Modulation of finger photoplethysmographic traces during forced respiration: venous blood in motion?. 2012 Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), pp. 3644-3647. doi: 10.1109/EMBC.2012.6346756
Phillips, J. P., Hickey, M. & Kyriacou, P. A. (2012). Evaluation of Electrical and Optical Plethysmography Sensors for Noninvasive Monitoring of Hemoglobin Concentration. Sensors, 12(2), pp. 1816-1826. doi: 10.3390/s120201816
Preziosi, M-C. & Micic, T. (2012). Embankment dam probabilistic assessment for climate scenarios. Proceedings of the ICE - Geotechnical Engineering, 165(3), pp. 179-193. doi: 10.1680/geng.11.00038
Pullen, K. R., Grigorchenkov, I. & Johnson, D. (2012). Evaluation of mobile and stationary applications of energy storage for DC railways and rapid transit. Paper presented at the RRUKA Annual Conference, 07-11-2012, Royal Society, London, UK.
Qassem, M. & Kyriacou, P. A. (2012). In vitro spectrophotometric near infrared measurements of skin absorption and dehydration. Conference proceedings : ... Annual International Conference of the IEEE Engineering in Medicine and Biology Society. IEEE Engineering in Medicine and Biology Society., 2012, pp. 6044-6047. doi: 10.1109/EMBC.2012.6347372
Quinn, Charles Andrew (2012). Examining the Influence of Safety Management in the Personal Spaceflight Industry. (Unpublished Doctoral thesis, City University London)
Rajarajan, M., Sajjad, A., Zisman, A. , Nair, S. K. & Dimitrakos, T. (2012). Secure communication using dynamic VPN provisioning in an Inter-Cloud environment. Paper presented at the ICON 2012: 18th IEEE International Conference on Networks, 12 - 14 Dec 2012, Singapore.
Ramirez, C. M., Tomas-Rodriguez, M. & Evangelou, S. A. (2012). Dynamical analysis of a duolever suspension system. In: Proceedings of the 2012 UKACC International Conference on Control, CONTROL 2012. (pp. 1106-1111). IEEE. doi: 10.1109/CONTROL.2012.6334787
Raoufi, N., Surre, F., Sun, T. , Rajarajan, M. & Grattan, K. T. V. (2012). Wavelength dependent pH optical sensor using the layer-by-layer technique. Sensors and Actuators B Chemical, 169, pp. 374-381. doi: 10.1016/j.snb.2012.05.024
Reyes-Aldasoro, C. C., Henry, K. M. & Renshaw, S. A. (2012). Tracking neutrophils in zebrafish: the use of synthetic data sets. In: http://miua2012.swansea.ac.uk/. Medical Image Understanding and Analysis, 09-07-2012 - 11-07-2012, Swansea, UK.
Rizvi, S., Qureshi, H. K., Khayam, S. A. , Rakocevic, V. & Rajarajan, M. (2012). A1: An energy efficient topology control algorithm for connected area coverage in wireless sensor networks. Journal of Network and Computer Applications, 35(2), pp. 597-605. doi: 10.1016/j.jnca.2011.11.003
Rybynok, V., Budidha, K. ORCID: 0000-0002-6329-8399, May, J. ORCID: 0000-0002-8659-756X , Njoum, H., phillips, J. & kyriacou, P. A. ORCID: 0000-0002-2868-485X (2012). ZenPPG: a modular multi-channel photoplethysmography system
Salonikios, T. N., Sextos, A. & Kappos, A. J. (2012). Tests on composite slabs and evaluation of relevant Eurocode 4 provisions. Steel and composite structures, 13(6), pp. 571-586. doi: 10.12989/scs.2012.13.6.571
Shafique, M. & Kyriacou, P. A. (2012). Photoplethysmographic signals and blood oxygen saturation values during artificial hypothermia in healthy volunteers. Physiological Measurement, 33(12), pp. 2065-2078. doi: 10.1088/0967-3334/33/12/2065
Shafique, M., Kyriacou, P. A. & Pal, S. K. (2012). Investigation of photoplethysmographic signals and blood oxygen saturation values on healthy volunteers during cuff-induced hypoperfusion using a multimode PPG/SpO2 sensor. Medical and Biological Engineering and Computing, 50(6), pp. 1-9. doi: 10.1007/s11517-012-0910-z
Stanković, S. B. & Kyriacou, P. A. (2012). The effects of thermistor linearization techniques on the T-history characterization of phase change materials. Applied Thermal Engineering, 44(Nov), pp. 78-84. doi: 10.1016/j.applthermaleng.2012.03.032
Stosic, N., Smith, I. K. ORCID: 0000-0003-1524-9880 & Kovacevic, A. ORCID: 0000-0002-8732-2242 (2012). Numerical and experimental research in heat transfer to screw compressor rotors. Frontiers in Heat and Mass Transfer, 3(2), article number 23003. doi: 10.5098/hmt.v3.2.3003
Sun, T., Grattan, K. T. V., Srinivasan, S. , Basheer, P.A.M., Smith, B. J. & Viles, H. A. (2012). Building Stone Condition Monitoring Using Specially Designed Compensated Optical Fiber Humidity Sensors. IEEE Sensors Journal, 12(5), pp. 1011-1017. doi: 10.1109/jsen.2011.2163504
Sun, Z., Schrijer, F. F. J., Scarano, F. & van Oudheusden, B. W. (2012). PIV investigation of the 3D instantaneous flow organization behind a micro-ramp in a supersonic boundary layer. Paper presented at the 28th International Symposium on Shock Waves, 17-07-2011 - 22-07-2011, Manchester, UK. doi: 10.1007/978-3-642-25685-1_63
Sun, Z., Schrijer, F. F. J., Scarano, F. & van Oudheusden, B. W. (2012). The three-dimensional flow organization past a micro-ramp in a supersonic boundary layer. Physics of Fluids, 24(5), article number 055105. doi: 10.1063/1.4711372
Themistos, C., Kalli, K., Komodromos, M. , Markides, C., Quadir, A., Rahman, B. M. & Grattan, K. T. V. (2012). Low-loss multimode interference couplers for terahertz waves. Proceedings of SPIE, 8426, article number 84260X. doi: 10.1117/12.925655
Themistos, C., Kalli, K., Komodromos, M. , Rahman, B. M. & Grattan, K. T. V. (2012). Low-loss multimode interference couplers for terahertz waves. In: Proceedings of SPIE. Conference on Microstructured and Specialty Optical Fibres, 17-04-2012 - 19-04-2012, Brussels, Belgium.
Torrisi, F., Hasan, T., Wu, W. , Sun, Z., Lombardo, A., Kulmala, T. S., Hsieh, G-W., Jung, S., Bonaccorso, F., Paul, P. J., Chu, D. & Ferrari, A. C. (2012). Inkjet-Printed Graphene Electronics. ACS Nano, 6(4), pp. 2992-3006. doi: 10.1021/nn2044609
Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 & D'Mello, C. ORCID: 0000-0002-5726-6868 (2012). Detailed Study of Perforated Beams with Closely Spaced Novel Web Openings. In: IABSE Congress Reports. 18th IABSE Congress: Innovative Infrastructures – Towards Human Urbanism, 19-21 Sep 2012, Seoul, Korea. doi: 10.2749/222137912805111456
Tsavdaridis, K. D. & D'Mello, C. (2012). Optimisation of Novel Elliptically-Based Web Opening Shapes of Perforated Steel Beams. Journal of Constructional Steel Research, 76, pp. 39-53. doi: 10.1016/j.jcsr.2012.03.026
Tsavdaridis, K. D. & D'Mello, C. (2012). Vierendeel bending study of perforated steel beams with various novel web opening shapes, through non-linear Finite Element analyses. Journal of Structural Engineering, 138(10), pp. 1214-1230. doi: 10.1061/(asce)st.1943-541x.0000562
Uthman, M., Rahman, B. M., Kejalakshmy, N. , Agrawal, A., Abana, H. & Grattan, K. T. V. (2012). Stabilized large mode area in tapered photonic crystal fiber for stable coupling. IEEE Photonics Journal, 4(2), pp. 340-349. doi: 10.1109/jphot.2012.2188788
Uthman, M., Rahman, B. M., Kejalakshmy, N. , Agrawal, A. & Grattan, K. T. V. (2012). Design and Characterization of Low-Loss Porous-Core Photonic Crystal Fiber. IEEE Photonics Journal, 4(6), pp. 2315-2325. doi: 10.1109/jphot.2012.2231939
Wang, Y. & Liatsis, P. (2012). 3-D Quantitative Vascular Shape Analysis for Arterial Bifurcations via Dynamic Tube Fitting. IEEE Transactions on Biomedical Engineering, 59(7), pp. 1850-1860. doi: 10.1109/tbme.2011.2179654
Wang, Y. & Liatsis, P. (2012). Automatic Segmentation of Coronary Arteries in CT Imaging in the Presence of Kissing Vessel Artifacts. IEEE Transactions on Information Technology in Biomedicine, 16(4), pp. 782-788. doi: 10.1109/titb.2012.2192286
Wijeratne, I. N. M., Kejalakshmy, N., Agrawal, A. , Rahman, B. M. & Grattan, K. T. V. (2012). Numerical analysis of second harmonic generation in soft glass equiangular spiral photonic crystal fibers. IEEE Photonics Journal, 4(2), pp. 357-368. doi: 10.1109/jphot.2012.2186795
Witton-Dauris, Julia B. (2012). Centrifuge modelling of high shear capacity ribbed piles in stiff clay. (Unpublished Doctoral thesis, City University London)
Yan, S. & Ma, Q. (2012). Numerical study on significance of wind action on 2-D freak waves with different parameters. Journal of Marine Science and Technology, 20(1), pp. 9-17. doi: 10.51400/2709-6998.2417
Yan, S., Ma, Q. & Cheng, X. (2012). Numerical investigations on transient behaviours of two 3-D freely floating structures by using a fully nonlinear method. Journal of Marine Science and Application, 11(1), pp. 1-9. doi: 10.1007/s11804-012-1099-0
Zaman, T., Kyriacou, P. A., Belhaj, A. , Langford, R. M. & Patel, H. (2012). Development of a Reflectance Photoplethysmographic Sensor used for the Assessment of Perfusion of Free Jejunum Flaps: a case report. In: Kyriacou, E., Promponas, V., Loizou, C. , Schizas, C. N. & Pattichis, C. S. (Eds.), 2012 IEEE 12th International Conference on Bioinformatics & Bioengineering (BIBE). . IEEE. doi: 10.1109/BIBE.2012.6399642
Überall, Christian (2012). A dynamic multi-algorithm collaborative-filtering system. (Unpublished Doctoral thesis, City University London)
2011
Virdi, K. & Tenhunen, L., eds. (2011). Proceedings of the METNET Seminar 2011 in Aarhus. Hämeenlinna, Finland: HAMK University of Applied Sciences.
Abdelmalik, A. A., Abbott, A. P., Fothergill, J. , Dodd, S. J. & Harris, R. C. (2011). Synthesis of a base-stock for electrical insulating fluid based on palm kernel oil. Industrial Crops and Products, 33(2), pp. 532-536. doi: 10.1016/j.indcrop.2010.11.019
Abdelmalik, A. A., Fothergill, J. & Dodd, S. J. (2011). Electrical breakdown strength characteristics of palm kernel oil ester-based dielectric fluids. Annual Report - Conference on Electrical Insulation and Dielectric Phenomena, CEIDP, 84, pp. 183-186. doi: 10.1109/ceidp.2011.6232627
Abdelmalik, A. A., Fothergill, J. & Dodd, S. J. (2011). Electrical properties of ester dielectric fluids from palm kernel oil. 2011 Annual Report Conference on Electrical Insulation and Dielectric Phenomena (CEIDP), 2, pp. 415-418. doi: 10.1109/ceidp.2011.6232683
Abdelmalik, A. A., Fothergill, J., Dodd, S. J. , Abbott, A. P. & Harris, R. C. (2011). Effect of side chains on the dielectric properties of alkyl esters derived from palm kernel oil. In: Proceedings - IEEE International Conference on Dielectric Liquids. IEEE International Conference on Dielectric Liquids, 26 - 30 June 2011, Trondheim, Norway.
Abu-Nimeh, S., Chen, T. & Alzubi, O. (2011). Malicious and spam posts in online social networks. Computer, 44(9), pp. 23-28. doi: 10.1109/mc.2011.222
Adcock, T. A. A., Taylor, P. H., Yan, S. , Ma, Q. & Janssen, P. A. E. M. (2011). Did the Draupner wave occur in a crossing sea?. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 467(2134), pp. 3004-3021. doi: 10.1098/rspa.2011.0049
Akerman, S., Reyes-Aldasoro, C. C., Fisher, M. , Pettyjohn, K. L., Björndahl, M. A., Evans, H. & Tozer, G. M. (2011). Microflow of fluorescently labelled red blood cells in tumours expressing single isoforms of VEGF and their response to vascular targeting agents. Medical Engineering & Physics, 33(7), pp. 805-809. doi: 10.1016/j.medengphy.2010.09.006
Aristovich, K. Y., Khan, S. & Borovkov, A. I. (2011). Investigation of optimal parameters for finite element solution of the forward problem in magnetic field tomography based on magnetoencephalography. Journal of Physics: Conference Series, 307(1), article number 012015. doi: 10.1088/1742-6596/307/1/012015
Aristovich, Kirill (2011). Development of Methodologies for the Solution of the Forward Problem in Magnetic-Field Tomography (MFT) Based on Magnetoencephalography (MEG). (Unpublished Doctoral thesis, City University London)
Azabi, Y. O., Agrawal, A., Kejalakshmy, N. , Rahman, B. M. & Grattan, K. T. V. (2011). Equiangular spiral tellurite photonic crystal fiber for supercontinuum generation in mid-infrared. In: CLEO:2011 - Laser Applications to Photonic Applications. doi: 10.1364/CLEO_AT.2011.JThB72
Bond, S.J. (2011). The aeroplane is talking to you: What you should do to listen to it. IFA News, 2011(2011), pp. 18-19.
Carlton, J., Smart, R. & Jenkins, V. (2011). The nuclear propulsion of merchant ships: Aspects of engineering, science and technology. Journal of Marine Engineering and Technology, 10(2), pp. 47-59. doi: 10.1080/20464177.2011.11020247
Chalashkanov, N. M., Dodd, S. J., Dissado, L. A. & Fothergill, J. (2011). Pulse sequence analysis on PD data from electrical trees in flexible epoxy resins. 2011 Annual Report Conference on Electrical Insulation and Dielectric Phenomena (CEIDP), pp. 776-779. doi: 10.1109/ceidp.2011.6232771
Chen, T., Sanchez-Aarnoutse, J. C. & Buford, J. (2011). Petri net modeling of cyber-physical attacks on smart grid. IEEE Transactions on Smart Grid, 2(4), pp. 741-749. doi: 10.1109/tsg.2011.2160000
Christou, D. (2011). ERES Methodology and Approximate Algebraic Computations. (Unpublished Doctoral thesis, City University London)
Christou, D., Karcanias, N., Mitrouli, M. & Triantafyllou, D. (2011). Numerical and Symbolical Methods for the GCD of Several Polynomials. Lecture Notes in Electrical Engineering, 80 LNE, pp. 123-144. doi: 10.1007/978-94-007-0602-6_7
Coombs, W.M. & Crouch, R.S. (2011). Algorithmic issues for three-invariant hyperplastic Critical State models. Computer Methods in Applied Mechanics and Engineering, 200(25-28), pp. 2297-2318. doi: 10.1016/j.cma.2011.03.019
Coombs, W.M. & Crouch, R.S. (2011). Non-associated Reuleaux plasticity: Analytical stress integration and consistent tangent for finite deformation mechanics. Computer Methods in Applied Mechanics and Engineering, 200(9-12), pp. 1021-1037. doi: 10.1016/j.cma.2010.11.012
Dimitrakopoulos, E. G., Makris, N. & Kappos, A. J. (2011). Dimensional analysis of the earthquake-induced pounding between inelastic structures. Bulletin of Earthquake Engineering, 9(2), pp. 561-579. doi: 10.1007/s10518-010-9220-8
Elks, P. M., van Eeden, F. J., Dixon, G. , Wang, X., Reyes-Aldasoro, C. C., Ingham, P., Whyte, M., Walmsley, S. R. & Renshaw, S. A. (2011). Activation of hypoxia-inducible factor-1α (Hif-1α) delays inflammation resolution by reducing neutrophil apoptosis and reverse migration in a zebrafish inflammation model. Blood, 118(3), pp. 712-722. doi: 10.1182/blood-2010-12-324186
Favier, J., Pinelli, A. & Piomelli, U. (2011). Control of the separated flow around an airfoil using a wavy leading edge inspired by humpback whale flippers. Comptes Rendus Mecanique, 340(1-2), pp. 107-114. doi: 10.1016/j.crme.2011.11.004
Fonseca, J. ORCID: 0000-0002-7654-6005 (2011). The evolution of morphology and fabric of a sand during shearing. (Unpublished Doctoral thesis, Imperial College London)
Fothergill, J., Dodd, S. J., Dissado, L. A. , Liu, T. & Nilsson, U. H. (2011). The measurement of very low conductivity and dielectric loss in XLPE cables: A possible method to detect degradation due to thermal aging. IEEE Transactions on Dielectrics and Electrical Insulation, 18(5), pp. 1544-1553. doi: 10.1109/tdei.2011.6032823
Giaralis, A., Kougioumtzoglou, I. & Spanos, P. D. (2011). A stochastic approach for deriving effective linear properties of bilinear hysteretic systems subject to design spectrum compatible strong ground motions. Paper presented at the 8th International Conference on Structural Dynamics (EURODYN 2011), 04-06 July 2011, Leuven, Belgium.
Giaralis, A. & Spanos, P. D. (2011). Determination of non-stationary stochastic processes compatible with seismic response/design spectra. In: Spanos PD & Deodatis G (Eds.), Proceedings of the 6th International Conference on Computational Stochastic Mechanics (CSM-6),. 6th International Conference on Computational Stochastic Mechanics (CSM-6), 13th - 16th June 2010, Rhodes, Greece.
Glover, I. (2011). Integrating Flickr-based Images into Moodle to Increase Visual Appeal and Dynamism of Teaching Spaces. In: Bastiaens, T. & Ebner, M. (Eds.), Proceedings of World Conference on Educational Multimedia, Hypermedia and Telecommunications 2011. (pp. 768-772). EdITLib.
He, J., Tang, Z., O'Farrell, T. & Chen, T. (2011). Performance analysis of DSRC priority mechanism for road safety applications in vehicular networks. Wireless Communications and Mobile Computing, 11(7), pp. 980-990. doi: 10.1002/wcm.821
Heiyanthuduwage, M. A., Mounoury, S. & Kovacevic, A. (2011). Performance prediction methods for screw compressors. In: 7th International Conference on Compressors and their Systems 2011. (pp. 411-420). Woodhead Publishing Limited.
Hessami, A. G. & Karcanias, N. (2011). Complexity, Emergence and the Challenges of Assurance: The Need for a Systems Paradigm. IEEE Aerospace and Electronic Systems Magazine, 26(2), pp. 34-41. doi: 10.1109/maes.2011.5739488
Hessami, A. G. & Karcanias, N. (2011). Integration of operations in process systems. In: 2011 IEEE International Systems Conference (SysCon). 2011 IEEE International Systems Conference, 4-7 April 2011, Montreal, Canada. doi: 10.1109/SYSCON.2011.5929053
Hickey, M., Samuels, N., Randive, N. , Langford, R. M. & Kyriacou, P. A. (2011). Investigation of photoplethysmographic signals and blood oxygen saturation values obtained from human splanchnic organs using a fiber optic sensor. Journal of Clinical Monitoring and Computing, 25(4), pp. 245-255. doi: 10.1007/s10877-011-9302-4
Hickey, M., Samuels, N., Randive, N. , Langford, R. M. & Kyriacou, P. A. (2011). An in vivo investigation of photoplethysmographic signals and preliminary pulse oximetry estimation from the bowel using a new fiberoptic sensor. Anesthesia and Analgesia, 112(5), pp. 1104-1109. doi: 10.1213/ane.0b013e31820f8df3
Howey, D. A., Holmes, A. S. & Pullen, K. R. (2011). Measurement and CFD Prediction of Heat Transfer in Air-Cooled Disc-Type Electrical Machines. IEEE Transactions on Industry Applications, 47(4), pp. 1716-1723. doi: 10.1109/tia.2011.2156371
Karcanias, N. (2011). The Minimal Design Problem on Dynamic Polynomial Combinants. In: Proceedings of 18th IFAC World Congress. 18th IFAC World Congress, 28-08-2011 - 02-09-2011, Milano Italy.
Karcanias, N. & Fatouros, S. (2011). Approximate Zero Polynomials of Polynomial Matrices and Linear Systems. Paper presented at the European Control Conference 2009, 23-26 Aug 2009, Budapest, Hungary.
Karcanias, N. & Halikias, G. (2011). Approximate zero polynomials of polynomial matrices and linear systems. 2011 50th IEEE Conference on Decision and Control and European Control Conference, 241 243, pp. 465-470. doi: 10.1109/cdc.2011.6160302
Karcanias, N. & Hessami, A. G. (2011). System of Systems and Emergence. Part 1: Principles and Framework. In: Proceedings of ICETET 2011. 4th International Conference on Emerging Trends in Engineering and Technology (ICETET), 18-11-2011 - 20-11-2011, Port Louis, Mauritius.
Karimi, M., Surre, F., Sun, T. , Grattan, K. T. V., Margulis, W. & Fonjallaz, P. (2011). Directional Force Measurement Using Specialized Single-Mode Polarization-Maintaining Fibers. Journal of Lightwave Technology, 29(24), pp. 3611-3615. doi: 10.1109/jlt.2011.2167011
Khan, S. & Finkelstein, L. (2011). Mathematical modelling in measurement and instrumentation. Measurement and Control, 44(9), pp. 277-282. doi: 10.1177/002029401104400904
Kopanidis, A., Theodorakakos, A., Gavaises, M. & Bouris, D. (2011). Pore scale 3D modelling of heat and mass transfer in the gas diffusion layer and cathode channel of a PEM fuel cell. International Journal of Thermal Sciences, 50(4), pp. 456-467. doi: 10.1016/j.ijthermalsci.2010.11.014
Kovacevic, A., Mujic, E., Stosic, N. & Smith, I. K. (2011). Extending the Role of Computational Fluid Dynamics in Screw Machines. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 225(2), pp. 1-15. doi: 10.1177/0954408910397586
Kulesza, T., Stumpf, S., Wong, W-K. , Burnett, M., Perona, S., Ko, A. & Oberst, I. (2011). Why-Oriented End-User Debugging of Naïve Bayes Text Classification. Transactions on Interactive Intelligent Systems, 1(1), pp. 1-31. doi: 10.1145/2030365.2030367
Ma, Yingnan (2011). Intelligent energy management system - techniques and methods. (Unpublished Doctoral thesis, City University London)
May, J.M., Kyriacou, P. A. & Petros, A. J. (2011). Development of an Optoelectronic Sensor for the Investigation of Photoplethysmographic Signals from the Anterior Fontanel of the Newborn. In: Conference proceedings : ... Annual International Conference of the IEEE Engineering in Medicine and Biology Society. IEEE Engineering in Medicine and Biology Society. Conference. Engineering in Medicine and Biology Society, EMBC, 2011 Annual International Conference of the IEEE, Aug. 30 2011-Sept. 3 2011, Boston, MA. doi: 10.1109/IEMBS.2011.6089886
May, J.M., Kyriacou, P. A. & Petros, A. J. (2011). Development of an Optoelectronic Sensor for the Investigation of Photoplethysmographic Signals from the Anterior Fontanel of the Newborn. Engineering in Medicine and Biology Society, EMBC, 2011 Annual International Conference of the IEEE, pp. 18-21. doi: 10.1109/IEMBS.2011.6089886
Mercieca, J., Kaparias, I., Bell, M. G. H. & Finch, E. (2011). Integrated street design in high-volume junctions: The case study of London’s Oxford Circus. Paper presented at the 1st International Conference on Access Management, 15-17 June 2011, Athens, Greece.
Milonidis, E., Kostarigka, A. & Karcanias, N. (2011). Finite settling time stabilisation: the robust SISO case. International Journal of Control, 84(9), pp. 1521-1532. doi: 10.1080/00207179.2011.611949
Mitroglou, N., Gavaises, M., Nouri, J. M. & Arcoumanis, C. (2011). Cavitation Inside Enlarged And Real-Size Fully Transparent Injector Nozzles And Its Effect On Near Nozzle Spray Formation. In: Cossali, GE & Tonini, S (Eds.), Proceedings of the DIPSI Workshop 2011. Droplet Impact Phenomena & Spray Investigations. Droplet Impact Phenomena and Spray Investigations Workshop 2011, 27 May 2011, Bergamo, Italy.
Moschonas, I. F. & Kappos, A. J. (2011). Generalized fragility curves for bearing-supported skew bridges, for arbitrary angle of incidence of the seismic action. In: Papadrakakis, M., Fragiadakis, M. & Plevris, V. (Eds.), Computational Methods in Structural Dynamics and Earthquake Engineering. (pp. 3486-3508). Athens: Institute of Structural Analysis and Antiseismic Research.
Mujic, E., Kovacevic, A., Stosic, N. & Smith, I. K. (2011). Noise generation and suppression in twin screw compressors. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 225(2), pp. 127-148. doi: 10.1177/1464419311403875
Nucara, P. & Sayma, A. I. (2011). Effects of using Hydrogen-rich Syngas in industrial gas turbines while maintaining fuel flexibility on compressor design. Paper presented at the ASME Turbo Expo 2011, 06-06-2011 - 10-06-2011, Vancouver, Canada. doi: 10.1115/GT2011-45589
Ohadi, A. & Micic, T. (2011). Stochastic process deterioration modelling for adaptive inspections. In: Applications of Statistics and Probability in Civil Engineering. (pp. 322-326). UK: CRC Press.
Omidyeganeh, M. & Piomelli, U. (2011). Large-eddy simulation of two-dimensional dunes in a steady, unidirectional flow. Journal of Turbulence, 12(42), pp. 1-31. doi: 10.1080/14685248.2011.609820
Panagopoulos, I. & Bond, S.J. (2011). Improving flight safety in combat training: A step forward. Paper presented at the International Conference on Quality and Reliability, 14-09-2011 - 17-09-2011, Bangkok, Thailand. doi: 10.1109/ICQR.2011.6031671
Phillips, J. P., Hickey, M. & Kyriacou, P. A. (2011). Electro-optical Plethysmography for Non-invasive Estimation of Hemoglobin Concentration. Paper presented at the 2011 Annual International Conference of the IEEE, Aug. 30 2011-Sept. 3 2011, Boston, MA. doi: 10.1109/IEMBS.2011.6091079
Phillips, J. P., Hickey, M. & Kyriacou, P. A. (2011). Electro-optical Plethysmography for Non-invasive Estimation of Hemoglobin Concentration. 2011 Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBC, pp. 4348-4351. doi: 10.1109/IEMBS.2011.6091079
Phillips, J. P. & Kyriacou, P. A. (2011). Photoplethysmographic sensors for perfusion measurements in spinal cord tissue. Journal of Physics: Conference Series, 307(1), article number 12016. doi: 10.1088/1742-6596/307/1/012016
Phillips, J. P., Langford, R. M., Chang, S. H. , Kyriacou, P. A. & Jones, D. P. (2011). Photoplethysmographic measurements from the esophagus using a new fiber-optic reflectance sensor. Journal of Biomedical Optics (JBO), 16(7), article number 077005. doi: 10.1117/1.3598858
Quinn, A., Bond, S.J. & Maropoulos, P. (2011). New safety model for the commercial human spaceflight industry. Paper presented at the Fifth IAASS Conference: A Safer Space for a Safer World, 17-10-2011 - 19-10-2011, Versailles, France.
Qureshi, H. K., Rizvi, S., Saleem, M. , Khayam, S. A., Rakocevic, V. & Rajarajan, M. (2011). Poly: A Reliable and Energy Efficient Topology Control Protocol for Wireless Sensor Networks. Computer Communications, 34(10), pp. 1235-1242. doi: 10.1016/j.comcom.2010.12.016
Qureshi, Hassaan Khaliq (2011). Graph-theoretic channel modeling and topology control protocols for wireless sensor networks. (Unpublished Doctoral thesis, City University London)
Rahman, B. M., Uthman, M., Kejalakshmy, N. , Agrawal, A. & Grattan, K. T. V. (2011). Design of bent photonic crystal fiber supporting a single polarization. Applied Optics, 50(35), pp. 6505-6511. doi: 10.1364/ao.50.006505
Rajarajan, M., Adamsky, F., Khan, H. , Khayam, S. A. & Jager, R. (2011). Destabilizing BitTorrent's clusters to attack high bandwidth lechers. Poster presented at the 18th ACM Conference on Computer and Communications Security (CCS 2011), 17 Oct 2011 - 21 Oct 2011, SWISSÔTEL Chicago, Chicago, IL, USA.
Rajarajan, M., Sajjad, A., Zisman, A. , Nair, S. K. & Dimitrakos, T. (2011). Dynamic virtual private network provisioning from multiple cloud infrastructure service providers. Paper presented at the 4th European Conference, ServiceWave 2011, 26 - 28 Oct 2011, Poznan, Poland.
Reyes-Aldasoro, C. C., Björndahl, M. A., Akerman, S. , Ibrahim, J. & Tozer, G. M. (2011). An on-line chromatic and scale-space microvasculature-tracing analysis for transmitted light optical images. In: http://www.biomedical-image-analysis.co.uk/. Medical Image Understanding and Analysis, 14-07-2011 - 15-07-2011, London UK.
Reyes-Aldasoro, C. C., Williams, L. J., Akerman, S. , Kanthou, C. & Tozer, G. M. (2011). An automatic algorithm for the segmentation and morphological analysis of microvessels in immunostained histological tumour sections. Journal Of Microscopy, 242(3), pp. 262-278. doi: 10.1111/j.1365-2818.2010.03464.x
Salim, S. G. R., Fox, N. P., Hartree, W. S. , Woolliams, E. R., Sun, T. & Grattan, K. T. V. (2011). Stray light correction for diode-array-based spectrometers using a monochromator. Applied Optics, 50(26), pp. 5130-5138. doi: 10.1364/ao.50.005130
Sayma, A. I. (2011). Towards virtual testing of compression systems in gas turbine engines. NAFEMS International Journal of CFD Case Studies, 9, pp. 29-42.
Sekimoto, A., Kawahara, G., Sekiyama, K. , Uhlmann, M. & Pinelli, A. (2011). Turbulence-and buoyancy-driven secondary flow in a horizontal square duct heated from below. Physics of fluids, 23(7), 075103-. doi: 10.1063/1.3593462
Shafique, M., Kyriacou, P. A. & Pal, S. K. (2011). Investigation of pulse oximeter failure rates during artificial hypoperfusion utilising a custom made multimode pulse oximetery sensor. Engineering in Medicine and Biology Society, EMBC, 2011 Annual International Conference of the IEEE, 2011, pp. 4352-4355. doi: 10.1109/iembs.2011.6091080
Shafique, M., Kyriacou, P. A. & Pal, S. K. (2011). Investigation of pulse oximeter failure rates during artificial hypoperfusion utilising a custom made multimode pulse oximetery sensor. Paper presented at the Engineering in Medicine and Biology Society, EMBC, 2011 Annual International Conference of the IEEE, Aug. 30 2011-Sept. 3 2011, Boston, MA.
Shafqat, K., Kyriacou, P. A., Pal, S. K. & Langford, R. M. (2011). Instantaneous venous oxygenation estimation using the Photoplethysmograph (PPG) waveform. Journal of Physics: Conference Series, 307(1), article number e012018. doi: 10.1088/1742-6596/307/1/012018
Shafqat, K., Pal, S., Kumari, S. & Kyriacou, P. A. (2011). Empirical mode decomposition analysis of HRV data from patients undergoing local anaesthesia (brachial plexus block). Physiological Measurement, 32(4), pp. 483-497. doi: 10.1088/0967-3334/32/4/008
Shafqat, K., Pal, S., Kumari, S. & Kyriacou, P. A. (2011). HRV analysis in local anesthesia using Continuous Wavelet Transform (CWT). Engineering in Medicine and Biology Society, EMBC, 2011 Annual International Conference of the IEEE, 2011, pp. 4808-4811. doi: 10.1109/iembs.2011.6091191
Sharma, S., Moniz, A. R. B., Triantis, I. , Michelakis, K., Trzebinski, J., Azarbadegan, A., Field, B., Toumazou, C., Eames, I. & Cass, A. (2011). An integrated silicon sensor with microfluidic chip for monitoring potassium and pH. Microfluidics and Nanofluidics, 10(5), pp. 1119-1125. doi: 10.1007/s10404-010-0740-y
Smith, I. K., Stosic, N., Mujic, E. & Kovacevic, A. (2011). Steam as the working fluid for power recovery from exhaust gases by means of screw expanders. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 225(2), pp. 117-125. doi: 10.1177/2041300910393429
Soltani, M. R., Ghorbanian, K. & Masdari, M. ORCID: 0000-0002-1159-2406 (2011). Investigation of the pressure distribution and transition point over a swept wing. Scientia Iranica, 18(6), pp. 1277-1286. doi: 10.1016/j.scient.2011.10.001
Stallebrass, S. E. & Seward, L. J. (2011). The Effect of Mechanical Remoulding on the compression and strength characteristics of a Mercia Mudstone. Paper presented at the 15th European Conference on Soil Mechanics and Geotechnical Engineering, 2011, Athens, Greece.
Stankovic, S. B. & Kyriacou, P. A. (2011). Comparison of thermistor linearization techniques for accurate temperature measurement in phase change materials. Journal of Physics: Conference Series, 307(1), article number 12009. doi: 10.1088/1742-6596/307/1/012009
Stosic, N., Smith, I., Kovacevic, A. & Mujic, E. (2011). Review of Mathematical Models in Performance Calculation of Screw Compressors. International Journal of Fluid Machinery and Systems, 4(2), pp. 271-288. doi: 10.5293/ijfms.2011.4.2.271
Stosic, N., Smith, I. K. ORCID: 0000-0003-1524-9880, Kovacevic, A. ORCID: 0000-0002-8732-2242 & Mujic, E. (2011). Geometry of screw compressor rotors and their tools. Journal of Zhejiang University-SCIENCE A, 12(4), pp. 310-326. doi: 10.1631/jzus.a1000393
Strotos, G., Aleksis, G., Gavaises, M. , Nikas, K-S., Nikolopoulos, N. & Theodorakakos, A. (2011). Non-dimensionalisation parameters for predicting the cooling effectiveness of droplets impinging on moderate temperature solid surfaces. International Journal of Thermal Sciences, 50(5), pp. 698-711. doi: 10.1016/j.ijthermalsci.2010.11.021
Strotos, G., Gavaises, M., Theodorakakos, A. & Bergeles, G. (2011). Numerical investigation of the evaporation of two-component droplets. Fuel, 90(4), pp. 1492-1507. doi: 10.1016/j.fuel.2011.01.017
Tanvir, H. M., Rahman, B. M. & Grattan, K. T. V. (2011). Higher Order Lateral Mode Suppression Schemes for Edge Emitting Terahertz Quantum Cascade Laser Waveguides. IEEE Journal of Selected Topics in Quantum Electronics, 19(1), article number 8501106. doi: 10.1109/jstqe.2012.2210149
Tozer, G. M., Akerman, S., Cross, N. A. , Barber, P. R., Björndahl, M. A., Greco, O., Harris, S., Hill, S. A., Honess, D. J., Ireson, C. R., Pettyjohn, K. L., Prise, V. E., Reyes-Aldasoro, C. C., Ruhrberg, C., Shima, D. T. & Kanthou, C. (2011). Blood vessel maturation and response to vascular-disrupting therapy in single vascular endothelial growth factor-A isoform-producing tumors. Cancer Research, 68(7), pp. 2301-2311. doi: 10.1158/0008-5472.can-07-2011
Tsakarestos, A., Nocera, S., Kaparias, I. & Eden, N. (2011). Performance evaluation of urban traffic management and ITS: The Rome case study. Paper presented at the SIDT National Conference and Scienttfic Seminar, 6-7 Sept 2011, Venice, Italy.
Tsavdaridis, K. D. & D'Mello, C. (2011). Finite Element Investigation on Web-Post Buckling of Perforated Steel Beams with Various Web Opening Shapes subjected under different shear-moment interaction. Paper presented at the 6th European Conference on Steel and Composite Structures, 31-08-2011 - 02-09-2011, Budapest, Hungary.
Tsavdaridis, K. D. & D'Mello, C. (2011). Web buckling study of the behaviour and strength of perforated steel beams with different novel web opening shapes. Journal of Constructional Steel Research, 67(10), pp. 1605-1620. doi: 10.1016/j.jcsr.2011.04.004
Tsavdaridis, K. D. & Giaralis, A. (2011). Derivation of dynamic properties of steel perforated Ultra Shallow Floor Beams (USFBTD) via Finite Element modal analysis and experimental verification. In: Proceedings of the 7th National Conference on Steel Structures. 7th National Conference on Steel Structures, 28th - 30th September 2011, Volos, Greece.
Vocale, P., Dennis, R. & Pullen, K. R. (2011). The SCORE Project: Stove for Cooking, Refrigeration and Electricity. Paper presented at the V Congresso Nazionale AIGE, 08-09 Jun 2012, Modena, Italy.
Vogiatzaki, K., Kronenburg, A., Navarro-Martinez, S. & Jones, W. P. (2011). Stochastic multiple mapping conditioning for a piloted, turbulent jet diffusion flame. Proceedings of the Combustion Institute, 33(1), pp. 1523-1531. doi: 10.1016/j.proci.2010.06.126
Wang, F., Sayma, A. I., Peng, Z. J. & Huang, Y. (2011). A multi-section droplet combustion model for spray combustion simulation. Paper presented at the ASME 2011 Turbo Expo: Turbine Technical Conference and Exposition, 06-06-2011 - 10-06-2011, Vancouver, Canada. doi: 10.1115/GT2011-45023
Wang, Yin (2011). Blood Vessel Segmentation and shape analysis for quantification of Coronary Artery Stenosis in CT Angiography. (Unpublished Doctoral thesis, City University London)
Williams, L. J., Fisher, M., Reyes-Aldasoro, C. C. , Kanthou, C. & Tozer, G. M. (2011). Abstract 1578: A critical role for RhoA-GTPase signaling in the tumor vascular disrupting action of combretastatin-A4-phosphate in vivo. Cancer Research, 71(8_Supp), p. 1578. doi: 10.1158/1538-7445.am2011-1578
Woods, V. M., Triantis, I. & Toumazou, C. (2011). Offset prediction for charge-balanced stimulus waveforms. Journal of Neural Engineering new, 8(4), article number 046032. doi: 10.1088/1741-2560/8/4/046032
Yan, S. & Ma, Q. (2011). Improved model for air pressure due to wind on 2D freak waves in finite depth. European Journal of Mechanics - B/Fluids, 30(1), pp. 1-11. doi: 10.1016/j.euromechflu.2010.09.005
Zaman, T., Kyriacou, P. A. & Pal, S. (2011). Development of a Reflectance Photoplethysmographic Sensor used for the Assessment of Free Flap Perfusion. In: Conference proceedings : ... Annual International Conference of the IEEE Engineering in Medicine and Biology Society. IEEE Engineering in Medicine and Biology Society. Conference. EBMC 2011, Aug. 30 2011-Sept. 3 2011, Boston, MA. doi: 10.1109/IEMBS.2011.6090995
Zavitsas, K., Kaparias, I., Bell, M. G. H. & Nocera, S. (2011). Urban traffic management and Intelligent Transport Systems: A European perspective. Paper presented at the Transportation Research Board 90th Annual Meeting, 23-01-2011 - 27-01-2011, Washington, DC, USA.
Zhang, Q., D'Dowd, D., Wheeler, A. P. S. , He, L., Ligrani, P. & Cheong, B. C. Y. (2011). Over-tip shock wave structure and its impact on turbine blade heat transfer. Journal of Turbomachinery, 133(4), article number 41001. doi: 10.1115/1.4002949
Zhang, Q. & He, L. (2011). Over-Tip Choking and Its Implications on Turbine Blade Tip Aerodynamic Performance. Journal of Propulsion and Power, 27(5), pp. 1008-1014. doi: 10.2514/1.b34112
Zhao, Weizhong (2011). Optical fibre high temperature sensors and their applications. (Unpublished Doctoral thesis, City University London)
2010
Agrawal, A., Kejalakshmy, N., Rahman, B. M. & Grattan, K. T. V. (2010). Polarization and dispersion properties of elliptical hole golden spiral photonic crystal fiber. Applied Physics B: Lasers and Optics, 99(4), pp. 717-726. doi: 10.1007/s00340-010-4023-9
Aqida, S.N., Calosso, F., Brabazon, D. , Naher, S. & Rosso, M. (2010). Thermal fatigue properties of laser treated steels. International Journal of Material Forming, 3(S1), pp. 797-800. doi: 10.1007/s12289-010-0890-1
Aristovich, K. Y. & Khan, S. (2010). Automatic procedure for realistic 3D finite element modelling of human brain for bioelectromagnetic computations. Journal of Physics: Conference Series, 238(1), article number 012065. doi: 10.1088/1742-6596/238/1/012065
Aristovich, K. Y. & Khan, S. (2010). A new submodelling technique for multi-scale finite element computation of electromagnetic fields: application in bioelectromagnetism. Journal of Physics: Conference Series, 238(1), article number 012050. doi: 10.1088/1742-6596/238/1/012050
Ayoub, A. & Filippou, F. C. (2010). Finite-Element Model for Pretensioned Prestressed Concrete Girders. Journal of Structural Engineering, 136(4), pp. 401-409. doi: 10.1061/(ASCE)ST.1943-541X.0000132
Bayer, N., Xu, B., Rakocevic, V. & Habermann, J. (2010). Application-aware scheduling for VoIP in Wireless Mesh Networks. Computer Networks, 54(2), pp. 257-277. doi: 10.1016/j.comnet.2009.05.014
Behbahani, Peyman (2010). Connection Robustness for Wireless Moving Networks Using Transport Layer Multi-homing. (Unpublished Doctoral thesis, City University London)
Bohari, B. & Sayma, A. I. (2010). CFD analysis of effects of damage due to bird strike on fan performance. Paper presented at the ASME Turbo Expo 2010: Power for Land, Sea, and Air, 14-06-2010 - 18-06-2010, Glasgow, UK. doi: 10.1115/GT2010-22365
Carlton, J., Smart, R. & Jenkins, V. (2010). The Nuclear Propulsion of Merchant Ships: Aspects of Risk and Regulation. Paper presented at the Lloyd’s Register Technology Days 2010, Feb 2010, London, UK.
Chang, S. H., Maney, K., Phillips, J. P. , Langford, R. M. & Mehta, V. (2010). A comparison of the respiratory effects of oxycodone versus morphine: a randomised, double-blind, placebo-controlled investigation. Anaesthesia, 65(10), pp. 1007-1012. doi: 10.1111/j.1365-2044.2010.06498.x
Chen, T. (2010). Web filtering and censoring. IEEE Computer, 43(3), pp. 94-97. doi: 10.1109/mc.2010.84
Christou, D., Karcanias, N. & Mitrouli, M. (2010). The ERES method for computing the approximate GCD of several polynomials. Applied Numerical Mathematics, 60(1-2), pp. 94-114. doi: 10.1016/j.apnum.2009.10.002
Coombs, W.M., Crouch, R.S. & Augarde, C.E. (2010). Reuleaux plasticity: Analytical backward Euler stress integration and consistent tangent. Computer Methods in Applied Mechanics and Engineering, 199(25-28), pp. 1733-1743. doi: 10.1016/j.cma.2010.01.017
Damianou, C., Ioannides, K., Hadjisavvas, V. , Mylonas, N., Couppis, A., Iosif, D. & Kyriacou, P. A. (2010). MRI monitoring of lesions created at temperature below the boiling point and of lesions created above the boiling point using high intensity focused ultrasound. Journal of Biomedical Science and Engineering, 03(08), pp. 763-775. doi: 10.4236/jbise.2010.38102
Dodd, S. J., Chalashkanov, N. M., Dissado, L. A. & Fothergill, J. (2010). Influence of absorbed moisture on the dielectric properties of epoxy resins. In: Annual Report - Conference on Electrical Insulation and Dielectric Phenomena, CEIDP. Conference on Electrical Insulation and Dielectric Phenomena (CEIDP), 17 - 20 October 2010, West Lafayette, IN.
Dodd, S. J., Chalashkanov, N. M. & Fothergill, J. (2010). Partial Discharge Patterns in Conducting and Non-Conducting Electrical Trees. In: PROCEEDINGS OF THE 2010 IEEE INTERNATIONAL CONFERENCE ON SOLID DIELECTRICS (ICSD 2010). 10th IEEE International Conference on Solid Dielectrics (ICSD), 04-07-2010 - 09-07-2010, Univ Potsdam, Potsdam, Germany.
Dodd, S. J., Chalashkanov, N. M., Fothergill, J. & Dissado, L. A. (2010). Influence of the temperature on the dielectric properties of epoxy resins. In: Proceedings of the 2010 IEEE International Conference on Solid Dielectrics, ICSD 2010. International Conference on Solid Dielectrics ICSD, 4 - 9 July 2010, Potsdam, Germany.
Edirisingha, P., Hawkridge, D. & Fothergill, J. (2010). A renaissance of audio: Podcasting approaches for learning on campus and beyond. European Journal of Open, Distance and E-Learning, 1,
Ekonomou, L. (2010). Greek long-term energy consumption prediction using artificial neural networks. Energy, 35(2), pp. 512-517. doi: 10.1016/j.energy.2009.10.018
Fonseca, J., O'Sullivan, C. & Coop, M. R. (2010). Quantitative Description of Grain Contacts in a Locked Sand. In: Reed, A. H. (Ed.), Advances in Computed Tomography for Geomaterials: GeoX 2010. (pp. 17-25). Wiley. doi: 10.1002/9781118557723.ch2
Frechette, M. J., Vijh, A., Trudeau, M. L. , Utracki, L., Sami, A., David, E. & Fothergill, J. (2010). Nanodielectics (A "Universal" Panacea for Solving All Electrical Insualation Problems?). Paper presented at the 2010 International Conference on Solid Dielectrics, 4 - 9 July 2010, Postdam, Germany.
Fréchette, M. F., Vijh, A., Utracki, L. , Trudeau, M. L., Sami, A., Laurent, C., Morshuis, P., Andritsch, T., Kochetov, R., Vaughan, A., David, E., Castellon, J., Fabiani, D., Gubanski, S., Kindersberger, J., Reed, C., Krivda, A., Fothergill, J., Dodd, S. J., Guastavino, F. & Alamdari, H. (2010). Nanodielectrics: A panacea for solving all electrical insulation problems? In: 2010 10th IEEE International Conference on Solid Dielectrics (ICSD). 10th IEEE International Conference on Solid Dielectrics, 4-9 Jul 2010, Potsdam, Germany. doi: 10.1109/ICSD.2010.5568067
Fu, F. (2010). 3-D nonlinear dynamic progressive collapse analysis of multi-storey steel composite frame buildings—Parametric study. Engineering Structures, 32(12), pp. 3974-3980. doi: 10.1016/j.engstruct.2010.09.008
Fu, F., Lam, D. & Ye, J. Q. (2010). Moment resistance and rotation capacity of semi-rigid composite connections with precast hollowcore slabs. Journal of Constructional Steel Research, 66(3), pp. 452-461. doi: 10.1016/j.jcsr.2009.10.016
Giaralis, A. & Spanos, P. D. (2010). Derivation of Eurocode 8 spectrum-compatible time-histories from recorded seismic accelerograms via harmonic wavelets. In: Papanastasiou P, Roussis P, Loukidis D , Sarris E & Katsikadelis J (Eds.), Proceedings of the 9th HSTAM International Congress on Mechanics (9HSTAM). 9th HSTAM International Congress on Mechanics (9HSTAM), 12th - 14th July 2010, Limassol, Cyprus.
Giaralis, A. & Spanos, P. D. (2010). Effective linear damping and stiffness coefficients of nonlinear systems for design spectrum based analysis. Soil Dynamics and Earthquake Engineering, 30(9), pp. 798-810. doi: 10.1016/j.soildyn.2010.01.012
Halikias, G., Papageorgiou, A. & Karcanias, N. (2010). Non-overshooting stabilisation via state and output feedback. INTERNATIONAL JOURNAL OF CONTROL, 83(6), pp. 1232-1247. doi: 10.1080/00207171003664844
Halikias, G., Tsoulkas, V., Pantelous, A. & Milonidis, E. (2010). Hankel-norm approximation of FIR filters: a descriptor-systems based approach. International Journal of Control, 83(9), pp. 1858-1867. doi: 10.1080/00207179.2010.498059
Hickey, M., Samuels, N., Randive, N. , Langford, R. M. & Kyriacou, P. A. (2010). Measurement of splanchnic photoplethysmographic signals using a new reflectance fiber optic sensor. Journal of Biomedical Optics, 15(2), article number 027012. doi: 10.1117/1.3374355
Hickey, M., Samuels, N., Randive, N. , Langford, R. M. & Kyriacou, P. A. (2010). A New Fibre Optic Pulse Oximeter Probe for Monitoring Splanchnic Organ Arterial Blood Oxygen Saturation. Paper presented at the The 12th Mediterranean Conference on Medical and Biological Engineering and Computing, 27-05-2010 - 30-05-2010, Chalkidiki, Greece.
Hickey, M., Samuels, N., Randive, N. , Langford, R. M. & Kyriacou, P. A. (2010). Preliminary assessment of abdominal organ perfusion utilizing a fiber optic photoplethysmographic sensor. In: Conference proceedings : ... Annual International Conference of the IEEE Engineering in Medicine and Biology Society. IEEE Engineering in Medicine and Biology Society. Conference. 2010 Annual International Conference of the IEEE, Aug. 31 2010-Sept. 4 2010, Buenos Aires. doi: 10.1109/IEMBS.2010.5627751
Howey, D. A., Holmes, A. S. & Pullen, K. R. (2010). Radially resolved measurement of stator heat transfer in a rotor-stator disc system. International Journal of Heat and Mass Transfer, 53(1-3), pp. 491-501. doi: 10.1016/j.ijheatmasstransfer.2009.09.006
Huo, B. Y., D'Mello, C. & Tsavdaridis, K. D. (2010). Experimental study and analytical study of push-out shear tests in Ultra Shallow Floor Beams. Paper presented at the 34th IABSE Symposium - International Association for Bridge and Structural Engineering, 22nd - 24th September 2010, Venice, Italy. doi: 10.2749/222137810796024051
Kanthou, C., Reyes-Aldasoro, C. C. & Tozer, G. M. (2010). Signaling interactions between RhoGTPase and cAMP/cGMP influence endothelial responses to the vascular disrupting agent combretastatin A4 phosphate. In: http://conference.ncri.org.uk/abstracts/2010/abstracts/C19.htm. 2010 NCRI Cancer Conference, 31-10-2010 - 03-11-2010, Liverpool, UK.
Kaparias, I., Bell, M. G. H., Greensted, J. , Cheng, S., Miri, A., Taylor, C. & Mount, B. (2010). Development and implementation of a vehicle-pedestrian conflict analysis method: Adaptation of a vehicle-vehicle technique. Transportation Research Record, 2198(1), pp. 75-82. doi: 10.3141/2198-09
Kappos, A. J., Panagopoulos, G., Sextos, A. , Papanikolaou, V.K. & Stylianidis, K. C. (2010). Development of comprehensive earthquake loss scenarios for a Greek and a Turkish city - structural aspects. Earthquakes and Structures, 1(2), pp. 197-214. doi: 10.12989/eas.2010.1.2.197
Karcanias, N., Halikias, G. & Papageorgiou, A. (2010). Strong stability of internal system descriptions. INTERNATIONAL JOURNAL OF CONTROL, 83(1), pp. 182-205. doi: 10.1080/00207170903124669
Katritsis, D. G., Theodorakakos, A., Pantos, I. , Andriotis, A., Efstathopoulos, E. P., Siontis, G., Karcanias, N., Redwood, S. & Gavaises, M. (2010). Vortex formation and recirculation zones in left anterior descending artery stenoses: computational fluid dynamics analysis. Physics in Medicine and Biology, 55(5), pp. 1395-1411. doi: 10.1088/0031-9155/55/5/009
Kejalakshmy, N., Agrawal, A., Aden, Y. , Leung, D. M., Rahman, B. M. & Grattan, K. T. V. (2010). Characterization of silicon nanowire by use of full-vectorial finite element method.. Applied Optics, 49(16), pp. 3173-3181. doi: 10.1364/ao.49.003173
Kyriacou, P. A. (2010). Temperature sensor technology. In: Jones, D. P. (Ed.), Biomedical Sensors. (pp. 1-38). New York: Momentum Press.
Liu, T., Fothergill, J., Dodd, S. J. , Dissado, L. A., Nilsson, U. H., Fu, M. & Perrot, F. (2010). Dielectric spectroscopy study of thermally-aged extruded model power cables. 2010 10th IEEE International Conference on Solid Dielectrics (ICSD), 183, pp. 1-4. doi: 10.1109/icsd.2010.5568077
Lockett, R. D. (2010). A length-scale analysis of instabilities in high pressure explosion flames,. In: Proceedings of the International Conference on Combustion (SPEIC'10). International Conference on Sustainable Combustion, 06 - 10 June 2010, Canary Islands.
Lockett, R. D. & Greenhalgh, D. A. (2010). Fuel distribution measurements in a model low NOx double annular combustor using laser induced fluorescence. In: Proceedings of ILASS Europe 2010. ILASS Europe - 23rd Annual Conference on Liquid Atomization and Spray Systems, 03 - 07 September 2010, Brno, Czech Replublic.
Lockett, R. D. & Greenhalgh, D. A. (2010). The optical characterisation of spray and soot formation in a diesel engine. In: Proceedings of the Internal Conference on Sustainable Combustion (SPEIC'10). International Conference on Sustainable Combustion (SPEIC'10), 06 - 09 June 2010, Canary Islands.
Lorenzoli, D. & Spanoudakis, G. (2010). EVEREST+: Run-time SLA violations prediction. In: Proceedings of the 5th International Workshop on Middleware for Service Oriented Computing. Middleware '10: 11th International Middleware Conference, 29 Nov - 3 Dec 2010, Bangalore, India. doi: 10.1145/1890912.1890915
Lucic, I. (2010). Risk and Safety in Engineering Processes. (Unpublished Doctoral thesis, City University London)
Marchi, A., Nouri, J. M., Yan, Y. & Arcoumanis, C. (2010). Spray stability of outwards opening pintle injectors for stratified direct injection spark ignition engine operation. International Journal of Engine Research, 11(6), pp. 413-437. doi: 10.1243/14680874JER605
Mavridou, S., Mavropoulos, G. C., Bouris, D. , Hountalas, D. T. & Bergeles, G. (2010). Comparative design study of a diesel exhaust gas heat exchanger for truck applications with conventional and state of the art heat transfer enhancements. Applied Thermal Engineering, 30(8-9), pp. 935-947. doi: 10.1016/j.applthermaleng.2010.01.003
Mergos, P.E. & Kappos, A. J. (2010). Seismic damage analysis including inelastic shear-flexure interaction. Bulletin of Earthquake Engineering, 8(1), pp. 27-46. doi: 10.1007/s10518-009-9161-2
Mohanty, V., Moliya, D., Hota, C. & Rajarajan, M. (2010). Secure Anonymous Routing for MANETs Using Distributed Dynamic Random Path Selection. Intelligence and Security Informatics, 6122, pp. 65-72. doi: 10.1007/978-3-642-13601-6_8
Mylonas, Nicos, Ioannides, K., Hadjisavvas, V. , Iosif, D., Kyriacou, P. A. & Damianou, C. (2010). Evaluation of fast spin echo MRI sequence for an MRI guided high intensity focused ultrasound system for in vivo rabbit liver ablation. Journal of Biomedical Science and Engineering, 03(03), pp. 241-246. doi: 10.4236/jbise.2010.33032
Naher, S., Orpen, D., Brabazon, D. , Poulsen, C.R. & Morshed, M.M. (2010). Effect of micro-channel geometry on fluid flow and mixing. Simulation Modelling Practice and Theory, 19(4), pp. 1088-1095. doi: 10.1016/j.simpat.2010.12.008
Nair, S. K., Porwal, S., Dimitrakos, T. , Ferrer, A. J., Tordsson, J., Sharif, T., Sheridan, C., Rajarajan, M. & Khan, A. U. (2010). Towards secure cloud bursting, brokerage and aggregation. Paper presented at the IEEE European conference on Web Services, 1 Dec 2010 - 3 Dec 2010, Cyprus.
Nemra, A. & Aouf, N. ORCID: 0000-0001-9291-4077 (2010). Robust INS/GPS Sensor Fusion for UAV Localization Using SDRE Nonlinear Filtering. IEEE Sensors Journal, 10(4), pp. 789-798. doi: 10.1109/jsen.2009.2034730
Nguyen, T.H., Sun, T., Grattan, K. T. V. & Hardwick, S. (2010). A fibre-optic chemical sensor for the detection of cocaine. Proceedings of SPIE, 7653, article number 76531V. doi: 10.1117/12.866496
Nikolopoulos, N., Strotos, G., Nikas, K-S. , Theodorakakos, A., Gavaises, M., Marengo, M. & Cossali, G. E. (2010). Single droplet impacts onto deposited drops. Numerical analysis and comparison. Atomization and Sprays, 20(11), pp. 935-953. doi: 10.1615/atomizspr.v20.i11.20
Pal, A., Dhar, A., Das, S. , Chen, S. Y., Sun, T., Sen, R. & Grattan, K. T. V. (2010). Ytterbium-sensitized Thulium-doped fiber laser in the near-IR with 980 nm pumping. Optics Express, 18(5), pp. 5068-5074. doi: 10.1364/oe.18.005068
Pancholi, M., Kyriacou, P. A. & Yeh, J. (2010). Design of an intelligent spinal artificial disk prosthesis for the investigation of in-vivo loading on the spine. Paper presented at the 2010 1st International Conference on Applied Bionics and Biomechanics (ICABB), 14-16 Oct 2010, Venice, Italy.
Paraskeva, T. S. & Kappos, A. J. (2010). Further development of a multimodal pushover analysis procedure for seismic assessment of bridges. Earthquake Engineering and Structural Dynamics, 39(2), pp. 211-222. doi: 10.1002/eqe.947
Phillips, J. P., Kyriacou, P. A., George, K. & Langford, R. M. (2010). Optical measurement of blood flow changes in spinal cord injury. Journal of Physics: Conference Series, 238(1), article number 12060. doi: 10.1088/1742-6596/238/1/012060
Phillips, J. P., Kyriacou, P. A. & Jones, D. P. (2010). Calculation of Photon Path Changes due to Scatter in Monte Carlo Simulations. In: Conference proceedings : ... Annual International Conference of the IEEE Engineering in Medicine and Biology Society. IEEE Engineering in Medicine and Biology Society. Conference. 2010 Annual International Conference of the IEEE, Aug. 31 2010-Sept. 4 2010, Buenos Aires. doi: 10.1109/IEMBS.2010.5627216
Phillips, J. P., Langford, R. M., Chang, S. H. , Maney, K., Kyriacou, P. A. & Jones, D. P. (2010). Cerebral Arterial Oxygen Saturation Measurements Using a Fiber-Optic Pulse Oximeter. Neurocritical Care, 13(2), pp. 278-285. doi: 10.1007/s12028-010-9349-y
Pinelli, A., Naqavi, I. Z., Piomelli, U. & Favier, J. (2010). Immersed Boundary Method for Generalised Finite Volume and Finite Difference Navier-Stokes Solvers. Journal of Computational Physics, 1(PARTS ), pp. 2361-2370. doi: 10.1115/fedsm-icnmm2010-30529
Pinelli, A., Uhlmann, M., Sekimoto, A. & Kawahara, G. (2010). Reynolds number dependence of mean flow structure in square duct turbulence. Journal of Fluid Mechanics, 644, pp. 107-122. doi: 10.1017/s0022112009992242
Rampidis, I. M., Giannakopoulos, D. & Bergeles, G. (2010). Insight into the Greek electric sector and energy planning with mature technologies and fuel diversification. Energy Policy, 38(8), pp. 4076-4088. doi: 10.1016/j.enpol.2010.03.034
Reyes-Aldasoro, C. C., Björndahl, M. A., Ibrahim, J. , Akerman, S. & Tozer, G. M. (2010). A scale-space tracing algorithm for analysis of tumour blood vessel morphology from transmitted light optical images. Poster presented at the 2010 NCRI Cancer Conference, 31-10-2010 - 03-11-2010, Liverpool, UK.
Reyes-Aldasoro, C. C., Griffiths, M. K., Savas, D. & Tozer, G. M. (2010). CAIMAN: an online algorithm repository for Cancer Image Analysis. Computer Methods and Programs in Biomedicine, 103(2), pp. 97-103. doi: 10.1016/j.cmpb.2010.07.007
Reyes-Aldasoro, C. C., Williams, L. J., Akerman, S. , Kanthou, C. & Tozer, G. M. (2010). Segmentation and morphological analysis of microvessels in immunostained histological tumour sections. Paper presented at the Medical Image Understanding and Analysis, 06-07-2010 - 07-07-2010, Warwick, Uk.
Rybynok, V. & Kyriacou, P. A. (2010). Beer-Lambert law along non-linear mean light pathways for the rational analysis of Photoplethysmography. Paper presented at the 13th IMEKO TC1-TC7 Joint Symposium, 01 Sep - 03 Sep 2010, London, UK. doi: 10.1088/1742-6596/238/1/012061
Rybynok, V., Kyriacou, P. A., Binnersley, J. & Woodcock, A. (2010). Development of a personal electronic health record card in the United Kingdom. In: Conference proceedings : ... Annual International Conference of the IEEE Engineering in Medicine and Biology Society. IEEE Engineering in Medicine and Biology Society. Conference. 2010 Annual International Conference of the IEEE, Aug. 31 2010-Sept. 4 2010, Buenos Aires. doi: 10.1109/IEMBS.2010.5626004
Rybynok, V., Kyriacou, P. A., Binnersley, J. & Woodcock, A. (2010). MyCare Card Development: Portable GUI Framework for the Personal Electronic Health Record Device. IEEE Transactions on Information Technology in Biomedicine, 15(1), pp. 66-73. doi: 10.1109/titb.2010.2091143
Shafique, M., Phillips, J. P. & Kyriacou, P. A. (2010). Evaluation of a multimode photoplethysmographic sensor during cuff-induced hypoperfusion. In: Conference proceedings : ... Annual International Conference of the IEEE Engineering in Medicine and Biology Society. IEEE Engineering in Medicine and Biology Society. Conference. 2010 Annual International Conference of the IEEE, Aug. 31 2010-Sept. 4 2010, Buenos Aires. doi: 10.1109/IEMBS.2010.5627730
Tong, L., Fothergill, J., Dodd, S. J. , Dissado, L. A., Nilsson, U. H. & Mingli, F. (2010). Dielectric spectroscopy study of thermally-aged extruded model power cables. Paper presented at the 10th IEEE International Conference on Solid Dielectrics, 04 - 09 July 2010, Postdam, Germany. doi: 10.1109/ICSD.2010.5568077
Tsavdaridis, K. D. (2010). Structural performance of perforated steel beams with novel web openings and with partial concrete encasement. (Unpublished Doctoral thesis, City University London)
Tuling, A. (2010). The effect of precipitation and microstructure on hot ductility in high Al, Nb containing TRIP steels. (Unpublished Doctoral thesis, City, University of London)
Uhlmann, M., Kawahara, G. & Pinelli, A. (2010). Traveling-waves consistent with turbulence-driven secondary flow in a square duct. Physics of Fluids, 22(8), 084102-. doi: 10.1063/1.3466661
Virdi, K. & Azzi, W. (2010). Behaviour of parallel girders stabilised with u-frames. Journal of Civil Engineering and Management, 16(2), pp. 197-202. doi: 10.3846/jcem.2010.21
Walton, Z. D., Kyriacou, P. A., Silverman, D. G. & Shelley, K. H. (2010). Measuring Venous Oxygen Saturation Using the Photoplethysmograph Waveform. Paper presented at the American Society of Anesthesiologists (ASA) Annual Meeting 2010, 16-20 Oct 2010, San Diego, USA.
Walton, Z. D., Kyriacou, P. A., Silverman, D. G. & Shelley, K. H. (2010). Measuring venous oxygenation using the photoplethysmograph waveform. Journal of Clinical Monitoring and Computing, 24(4), pp. 295-303. doi: 10.1007/s10877-010-9248-y
Wang, F., Leboeuf, F., Huang, Y. , Zhou, L. X. & Sayma, A. I. (2010). An algebraic sub-grid scale turbulent combustion model. Paper presented at the ASME Turbo Expo 2010: Power for Land, Sea, and Air, 14-06-2010 - 18-06-2010, Glasgow, UK. doi: 10.1115/GT2010-22033
Williams, L. J., Fisher, M., Reyes-Aldasoro, C. C. , Kanthou, C. & Tozer, G. M. (2010). A critical role for RhoA-GTPase signaling in the tumour vascular disrupting action of combretastatin A4-phosphate in vivo. In: http://conference.ncri.org.uk/abstracts/2010/abstracts/C28.htm. 2010 NCRI Cancer Conference, 31-10-2010 - 03-11-2010, Liverpool, UK.
Wu, W., Liu, Y. Q. & Zhu, D. B. (2010). π-Conjugated molecules with fused rings for organic field-effect transistors: design, synthesis and applications. Chemical Society Reviews, 39(5), pp. 1489-1502. doi: 10.1039/b813123f
Yan, S. & Ma, Q. (2010). QALE-FEM for modelling 3D overturning waves. International Journal for Numerical Methods in Fluids, 63(6), pp. 743-768. doi: 10.1002/fld.2100
Zhou, J. (2010). Numerical investigation of breaking waves and their interactions with structures using MLPG_R method. (Unpublished Doctoral thesis, City University London)
di Mare, L., Imregun, M., Green, J. S. & Sayma, A. I. (2010). A numerical study of labyrinth seal flutter. Journal of Tribology, 132(2), pp. 1-7. doi: 10.1115/1.3204774
2009
Akerman, S., Reyes-Aldasoro, C. C., Fisher, M. , Pettyjohn, K. L., Björndahl, M. A., Evans, H. & Tozer, G. M. (2009). Microflow of fluorescently labelled red blood cells in tumours expressing single isoforms of VEGF and their response to VEGF-R tyrosine kinase inhibition. Paper presented at the 2nd Micro and Nano Flows Conference (MNF2009), 01-09-2009 - 02-09-2009, London, Uk.
Andriotis, Adamantios (2009). Investigation of Cavitation inside Multi-hole Injectors for large Diesel Engines and its Effect on the Near-nozzle Spray Structure. (Unpublished Doctoral thesis, City University London)
Begaj Qerimi, L. (2009). Geotechnical centrifuge model testing for pile foundation re-use. (Unpublished Doctoral thesis, City, University of London)
Bilotta, E. & Stallebrass, S. E. (2009). Prediction of stresses and strains around model tunnels with adjacent embedded walls in overconsolidated clay. Computers and Geotechnics, 36(6), pp. 1049-1057. doi: 10.1016/j.compgeo.2009.03.015
Binnersley, J., Woodcock, A., Kyriacou, P. A. & Wallace, L. M. (2009). Establishing user requirements for a patient held electronic record system in the United Kingdom. In: Human Factors and Ergonomics Society, 53rd Annual Meeting. Human Factors and Ergonomics Society 53rd Annual Meeting—2009
Blasco, J., Hernandez-Castro, J. C., Tapiador, J. M. E. , Ribagorda, A. & Orellana-Quiros, M. A. (2009). Steganalysis of Hydan. IFIP Advances in Information and Communication Technology, 297, pp. 132-142. doi: 10.1007/978-3-642-01244-0_12
Carlton, J., Radosavlijevic, D. & Whitworth, S. (2009). Rudder-Propeller-Hull Interaction: The Results of Some Recent Research, In-Service Problems and their Solutions. In: Proceedings of the First International Symposium on Marine Propulsors - smp’09. First International Symposium on Marine Propulsors smp’09,, June 2009, Trondheim, Norway.
Chen, T. & Zeng, Y. (2009). Classification of traffic flows into QoS classes by unsupervised learning and KNN clustering. KSII Trans. on Internet and Information Systems, 3(2), pp. 134-146. doi: 10.3837/tiis.2009.02.001
Dimitrakopoulos, E. G., Kappos, A. J. & Makris, N. (2009). Dimensional analysis of yielding and pounding structures for records without distinct pulses. Soil Dynamics and Earthquake Engineering, 29(7), pp. 1170-1180. doi: 10.1016/j.soildyn.2009.02.006
Dimitrakopoulos, E. G., Makris, N. & Kappos, A. J. (2009). Dimensional analysis of the earthquake-induced pounding between adjacent structures. Earthquake Engineering and Structural Dynamics, 38(7), pp. 867-886. doi: 10.1002/eqe.872
Eckhardt, H.S (2009). Gas analysis in the deep ultraviolet wavelength region using fibre-optics and spectrophotometric detection. (Unpublished Doctoral thesis, City, University of London)
Edirisingha, P. & Fothergill, J. (2009). Balancing e-lectures with podcasts: a case study of an undergraduate engineering module. Engineering Education, 4(2), pp. 14-24.
Fonseca, J., O'Sullivan, C. & Coop, M. R. (2009). Image segmentation techniques for granular materials. Paper presented at the 6th International Conference on Micromechanics of Granular Media, 13-07-2009 - 17-07-2009, Colorado, USA. doi: 10.1063/1.3179898
Fothergill, J. (2009). Conclusions from the Melville Report on the Changing Learner Experience (CLEx) Enquiry. Paper presented at the EDEN 2009, 10-06-2009 - 13-06-2009, Gdansk, Poland.
Fothergill, J. (2009). A renaissance of audio: podcasting approaches for learning on campus and beyond. Paper presented at the EDEN 2009, 10-13 June 2009, Gdansk, Poland.
Fu, F. (2009). Progressive collapse analysis of high-rise building with 3-D finite element modeling method. Journal of Constructional Steel Research, 65(6), pp. 1269-1278. doi: 10.1016/j.jcsr.2009.02.001
Gavaises, M., Andriotis, A., Papoulias, D. , Mitroglou, N. & Theodorakakos, A. (2009). Characterization of string cavitation in large-scale Diesel nozzles with tapered holes. Physics of Fluids, 21(5), article number 052107. doi: 10.1063/1.3140940
Giaralis, A. & Spanos, P. D. (2009). Determination of design spectrum compatible evolutionary spectra via Monte Carlo peak factor estimation. In: Van Gelder, P, Proske, D & Vrijling, JK (Eds.), Proceedings of the 7th International Probabilistic Workshop (7th IPW). 7th International Probabilistic Workshop (7th IPW), 25th - 26th November 2009, Delft, The Netherlands.
Giaralis, A. & Spanos, P. D. (2009). Wavelet-based response spectrum compatible synthesis of accelerograms-Eurocode application (EC8). Soil Dynamics and Earthquake Engineering, 29(1), pp. 219-235. doi: 10.1016/j.soildyn.2007.12.002
Grattan, K. T. V., Agrawal, A., Kejalakshmy, N. & Rahman, B. M. (2009). Soft Glass Equiangular Spiral Photonic Crystal Fiber for Supercontinuum Generation. IEEE Photonics Technology Letters, 21(22), pp. 1722-1724. doi: 10.1109/LPT.2009.2032523
Griffiths, M. K., Reyes-Aldasoro, C. C., Savas, D. & Greenfield, T. (2009). IOME, A Toolkit for Distributed and Collaborative Computational Science and Engineering. Paper presented at the UK e-science All Hands Meeting, 07-12-2009 - 09-12-2009, Oxford, UK.
Guillemain, Henri (2009). Fibre optic sensing techniques for the detection of lead (II) ions. (Unpublished Doctoral thesis, City University London)
Hadjisavvas, V., Damianou, C., Ioannides, K. , Mylonas, N., Couppis, A., Kyriacou, P. A., Iosif, D., HadjiCharalambous, T. & Parea, G. (2009). Penetration of high intensity focused ultrasound in vitro and in vivo rabbit brain using MR imaging. In: 9th International Conference on Information Technology and Applications in Biomedicine. 2009 9th International Conference on Information Technology and Applications in Biomedicine, 4-7 Nov 2009, Larnaca, Cyprus.
Hickey, M., Kyriacou, P. A., Samuels, N. , Randive, N., Chang, S. H., Maney, K. & Langford, R. M. (2009). Photoplethysmographic signals recorded from human abdominal organs using a fibreoptic probe. British Journal of Anaesthesia, 102(4), 572P-584P. doi: 10.1093/bja/aep007
Hickey, M., Samuels, N., Randive, N. , Langford, R. M. & Kyriacou, P. A. (2009). Development and evaluation of a photometric fibre-optic sensor for monitoring abdominal organ photoplethysmographs and blood oxygen saturation. In: SPIE Proceedings. 20th International Conference on Optical Fibre Sensors doi: 10.1117/12.834307
Hickey, M., Samuels, N., Randive, N. , Langford, R. M. & Kyriacou, P. A. (2009). In-Vivo Evaluation of a Fiber-Optic Splanchnic Photoplethysmographic Sensor during Open Laparotomy. Engineering in Medicine and Biology Society, 2009. EMBC 2009. Annual International Conference of the IEEE, 2009, pp. 1505-1508. doi: 10.1109/iembs.2009.5334159
Hickey, M., Samuels, N., Randive, N. , Langford, R. M. & Kyriacou, P. A. (2009). Photoplethysmographic signals from human splanchnic organs using a new fibre-optic sensor. Paper presented at the Annual National Conference of the Institute of Physics and Engineering in Medicine (IPEM), 14-16 Sep 2009, Liverpool, UK.
Hu, J., Kaparias, I. & Bell, M. G. H. (2009). Spatial econometrics models for congestion prediction with in-vehicle route guidance. IET Intelligent Transport Systems, 3(2), pp. 159-167. doi: 10.1049/iet-its:20070062
Kajan, K. (2009). Finite Element Modelling and Investigation of High Speed, Large Force and Long Lifetime Electromagnetic Actuators. (Unpublished Doctoral thesis, City University)
Kaparias, I. & Bell, M. G. H. (2009). Testing a reliable in-vehicle navigation algorithm in the field. IET Intelligent Transport Systems, 3(3), pp. 314-324. doi: 10.1049/iet-its.2008.0075
Kejalakshmy, N., Rahman, B. M., Agrawal, A. , Tanvir, H. M. & Grattan, K. T. V. (2009). Metal-Coated Defect-Core Photonic Crystal Fiber for THz Propagation. IEEE/OSA Journal of Lightwave Technology, 27(11), pp. 1631-1637. doi: 10.1109/jlt.2009.2020919
Kerrouche, A., Boyle, W. J. O., Sun, T. , Grattan, K. T. V., Schmidt, J. W. & Taljsten, B. (2009). Strain Measurement Using Embedded Fiber Bragg Grating Sensors Inside an Anchored Carbon Fiber Polymer Reinforcement Prestressing Rod for Structural Monitoring. IEEE Sensors Journal, 9(11), pp. 1456-1461. doi: 10.1109/jsen.2009.2018355
Khan, S. H., Aristovich, K. Y. & Borovkov, A. I. (2009). Solution of the Forward Problem in Magnetic-Field Tomography (MFT) Based on Magnetoencephalography (MEG). IEEE TRANSACTIONS ON MAGNETICS, 45(3), pp. 1416-1419. doi: 10.1109/tmag.2009.2012653
Kim, S., Nouri, J. M., Yan, Y. & Arcoumanis, C. (2009). Effects of intake flow on the spray structure of a multi-hole injector in a DISI engine. International Journal of Automotive Technology, 10(3), pp. 277-284. doi: 10.1007/s12239-009-0032-2
Kyriacou, P. A., Crerar-Gilbert, A., Langford, R. M. & Jones, D. P. (2009). Measurement of photoplethysmographic signals in human abdominal organs. Measurement, 42(7), pp. 1027-1031. doi: 10.1016/j.measurement.2009.03.004
Kyriacou, P. A., Pancholi, M. & Yeh, J. (2009). Investigation of the in-vitro loading on an artificial spinal disk prosthesis. Journal of Physics: Conference Series, 178(1), article number e012023. doi: 10.1088/1742-6596/178/1/012023
Kyriacou, P. A., Shafqat, K. & Pal, S. K. (2009). Pilot investigation of photoplethysmographic signals and blood oxygen saturation values during blood pressure cuff-induced hypoperfusion. Measurement, 42(7), pp. 1001-1005. doi: 10.1016/j.measurement.2009.02.005
Leventides, J. & Karcanias, N. (2009). Zero assignment of matrix pencils by additive structured transformations. LINEAR ALGEBRA AND ITS APPLICATIONS, 431(8), pp. 1380-1396. doi: 10.1016/j.laa.2009.05.033
Liu, T., Fothergill, J., Dodd, S. J. & Nilsson, U. H. (2009). Influence of semicon shields on the dielectric loss of XLPE cables. In: CEIDP: 2009 ANNUAL REPORT CONFERENCE ON ELECTRICAL INSULATION AND DIELECTRIC PHENOMENA. IEEE Conference on Electrical Insulation and Dielectric Phenomena, 2009, 18 - 21 October 2009, Virginia Beach, USA.
Lockett, R. D. (2009). Instabilities and soot formation in high pressure explosion flames. Paper presented at the The British-French Flame Days, 02 - 03 April 2009, Lille, France.
Lockett, R. D., Liverani, L., Thaker, D. & Arcoumanis, C. (2009). The characterisation of diesel cavitating flow using time-resolved light scattering. In: Injection Systems for IC Engines. IMechE Conference on Injection Systems for IC Engines, 13 - 14 May 2009, London, UK.
Ma, Q. & Zhou, J. (2009). MLPG_R Method for Numerical Simulation of 2D Breaking Waves. CMES: Computer Modeling in Engineering & Sciences, 43(3), pp. 277-303. doi: 10.3970/cmes.2009.043.277
Marchi, A. (2009). Internal flow and spray characteristics of an outwards opening pintle-type gasoline-injector. (Unpublished Doctoral thesis, City University London)
McNamara, A. M., Goodey, R.J. & Taylor, R.N. (2009). Apparatus for centrifuge modelling of top down basement construction with heave reducing piles. International Journal of Physical Modelling in Geotechnics, 9(1), pp. 1-14. doi: 10.1680/ijpmg.2009.9.1.01
Mitroglou, N., Nouri, J. M. & Arcoumanis, C. (2009). Spray structure from double fuel injection in multihole injectors for gasoline direct-injection engines. Atomization and Sprays, 19(6), pp. 529-545. doi: 10.1615/atomizspr.v19.i6.30
Nguyen, T.H., Lin, Y. C., Chen, C. T. , Surre, F., Venugopalan, T., Sun, T. & Grattan, K. T. V. (2009). Fibre optic chloride sensor based on fluorescence quenching of an acridinium dye. Proceedings of SPIE, 7503, doi: 10.1117/12.835607
Nikolopoulos, N., Theodorakakos, A. & Bergeles, G. (2009). Off-centre binary collision of droplets: A numerical investigation. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 52(19-20), pp. 4160-4174. doi: 10.1016/j.ijheatmasstransfer.2009.04.011
Ous, T. & Arcoumanis, C. (2009). The formation of water droplets in an air-breathing PEMFC. International Journal of Hydrogen Energy, 34(8), pp. 3476-3487. doi: 10.1016/j.ijhydene.2009.02.037
Papanikolaou, V.K. & Kappos, A. J. (2009). Numerical study of confinement effectiveness in solid and hollow reinforced concrete bridge piers: Methodology. Computers & Structures, 87(21-22), pp. 1427-1439. doi: 10.1016/j.compstruc.2009.05.004
Phillips, J. P., George, K., Kyriacou, P. A. & Langford, R. M. (2009). Investigation of Photoplethysmographic Changes using a Static Compression Model of Spinal Cord Injury. In: Conference proceedings : ... Annual International Conference of the IEEE Engineering in Medicine and Biology Society. IEEE Engineering in Medicine and Biology Society. Conference. EMBC 2009. Annual International Conference of the IEEE, 3-6 Sept. 2009, Minneapolis, MN. doi: 10.1109/IEMBS.2009.5334166
Phillips, J. P., Langford, R. M., Chang, S. H. , Maney, K., Kyriacou, P. A. & Jones, D. P. (2009). Evaluation of a Fiber-optic Esophageal Pulse Oximeter. In: Conference proceedings : ... Annual International Conference of the IEEE Engineering in Medicine and Biology Society. IEEE Engineering in Medicine and Biology Society. Conference. EMBC 2009. Annual International Conference of the IEEE, 3-6 Sept. 2009, Minneapolis, MN.
Phillips, J. P., Langford, R. M., Chang, S. H. , Maney, K., Kyriacou, P. A. & Jones, D. P. (2009). Measurements of Cerebral Arterial Oxygen Saturation using a Fiber-optic Pulse Oximeter. In: Conference proceedings : ... Annual International Conference of the IEEE Engineering in Medicine and Biology Society. IEEE Engineering in Medicine and Biology Society. Conference. EMBC 2009. Annual International Conference of the IEEE, 3-6 Sept. 2009, Minneapolis, MN. doi: 10.1109/IEMBS.2009.5334604
Phillips, J. P., Langford, R. M., Chang, S. H. , Maney, K., Kyriacou, P. A. & Jones, D. P. (2009). An oesophageal pulse oximetry system utilising a fibre-optic probe. Journal of Physics: Conference Series, 178(1), article number 12021. doi: 10.1088/1742-6596/178/1/012021
Rahman, B. M., Kejalakshmy, N., Uthman, M. , Agrawal, A., Wongcharoen, T. & Grattan, K. T. V. (2009). Mode degeneration in bent photonic crystal fiber study by using the finite element method. Applied Optics, 48(31), G131 - G138. doi: 10.1364/ao.48.00g131
Rajarajan, M., Spackova, B., Piliarik, M. , Kvasnicka, P., Themistos, C. & Homola, J. (2009). Novel concept of multi-channel fiber optic surface plasmon resonance sensor. Sensors and Actuators B: Chemical, 139(5), pp. 199-203. doi: 10.1016/j.snb.2008.12.020
Reyes-Aldasoro, C. C. (2009). Retrospective shading correction algorithm based on signal envelope estimation. Electronics Letters, 45(9), pp. 454-456. doi: 10.1049/el.2009.0320
Reyes-Aldasoro, C. C., Zhao, Y., Coca, D. , Billings, S. A., Kadirkamanathan, V., Tozer, G. M. & Renshaw, S. A. (2009). Analysis of immune cell function using in vivo cell shape analysis and tracking. Paper presented at the 4th IAPR International Conference on Pattern Recognition in Bioinformatics, 07-09-2009 - 09-09-2009, Sheffield, UK.
Rybynok, V., Kyriacou, P. A., Binnersley, J. , Woodcock, A. & Wallace, L. M. (2009). My Care Card development: the patient held electronic health record device. In: 2009 9TH INTERNATIONAL CONFERENCE ON INFORMATION TECHNOLOGY AND APPLICATIONS IN BIOMEDICINE. 2009 9th International Conference on Information Technology and Applications in Biomedicine, 4-7 Nov 2009, Larnaca, Cyprus.
Seward, L (2009). The Effect of Continuous Flight Auger Pile Installation on the Soil-Pile Interface in the Mercia Mudstone Group. (Unpublished Doctoral thesis, City, University of London)
Shafique, M., Phillips, J. P. & Kyriacou, P. A. (2009). Design and development of a new non-invasive trans-reflectance photoplethysmographic probe. Paper presented at the Annual National Conference of the Institute of Physics and Engineering in Medicine (IPEM 2009), 14-16 Sep 2009, Liverpool, UK.
Shafique, M., Phillips, J. P. & Kyriacou, P. A. (2009). A novel non-invasive trans-reflectance photoplethysmographic probe for use in cases of low peripheral blood perfusion. Conference proceedings : ... Annual International Conference of the IEEE Engineering in Medicine and Biology Society. IEEE Engineering in Medicine and Biology Society. Conference, doi: 10.1109/IEMBS.2009.5334165
Shafqat, K., Pal, S., Kumari, S. & Kyriacou, P. A. (2009). Time-Frequency analysis of HRV data from locally anesthetized patients. Annual International Conference of the IEEE Engineering in Medicine and Biology Society, 2009. EMBC 2009, pp. 1824-1827. doi: 10.1109/IEMBS.2009.5332604
Shafqat, K., Pal, S. K., Kumari, S. & Kyriacou, P. A. (2009). Empirical Mode Decomposition (EMD) analysis of HRV data from locally anesthetized patients. In: Conference proceedings : ... Annual International Conference of the IEEE Engineering in Medicine and Biology Society. IEEE Engineering in Medicine and Biology Society. Conference. EMBC 2009. Annual International Conference of the IEEE, 3-6 Sept. 2009, Minneapolis, MN. doi: 10.1109/IEMBS.2009.5335000
Spanos, P. D., Giaralis, A. & Li, J. (2009). Synthesis of accelerograms compatible with the Chinese GB 50011-2001 design spectrum via harmonic wavelets: artificial and historic records. Earthquake engineering and engineering vibration, 8(2), pp. 189-206. doi: 10.1007/s11803-009-9017-4
Stosic, N., Smith, I. K. & Kovacevic, A. (2009). Steam as the Working Fluid for Power Recovery from Exhaust Gases by Means of Screw Expanders. Paper presented at the International Conference on Compressors and Their Systems, 07-09-2009 - 09-09-2009, London, England.
Suarez-Tangil, G., Palomar, E., De Fuentes, J. M. , Blasco, J. & Ribagorda, A. (2009). Automatic rule generation based on genetic programming for event correlation. Advances in Intelligent and Soft Computing, 63 AIS, pp. 127-134. doi: 10.1007/978-3-642-04091-7_16
Themistos, C., Rajarajan, M., Rahman, B. M. & Grattan, K. T. V. (2009). Characterization of Silica Nanowires for Optical Sensing. Journal of Lightwave Technology, 27(24), pp. 5537-5542.
Tsavdaridis, K. D. & D'Mello, C. (2009). FE Investigation of Perforated Sections with Standard and Non-Standard Web Opening Configurations and Sizes. Paper presented at the 6th International Conference on Advances is Steel Structures, 16-12-2009 - 18-12-2009, Hong Kong, China.
Tsavdaridis, K. D. ORCID: 0000-0001-8349-3979 & D'Mello, C. ORCID: 0000-0002-5726-6868 (2009). Finite Element Investigation of Perforated Steel Beams with Different Web Opening Configurations. In: Proceedings of Sixth International Conference on Advances in Steel Structures and Progress in Structural Stability and Dynamics. ICASS '09, Sixth International Conference on Advances in Steel Structures, 16-18 Dec 2009, Hong Kong, China.
Tsavdaridis, K. D., D'Mello, C. & Hawes, M. (2009). Experimental Study of Ultra Shallow Floor Beams (USFB) with Perforated Steel Sections. Paper presented at the Nordic Steel Construction Conference 2009 - NSCC2009, 02-09-2009 - 04-09-2009, Malmö, Sweden.
Tsavdaridis, K. D., D'Mello, C. & Huo, B. Y. (2009). Shear Capacity of Perforated Concrete-Steel Ultra Shallow Floor Beams (USFB). Paper presented at the 6th National Concrete Conference, TEE, ETEK, 21-10-2009 - 23-10-2009, Paphos, Cyprus.
Vogiatzaki, K., Cleary, M. J., Kronenburg, A. & Kent, J. H. (2009). Modeling of scalar mixing in turbulent jet flames by multiple mapping conditioning. Physics of Fluids, 21(2), article number 25105. doi: 10.1063/1.3081553
Vogiatzaki, K., Kronenburg, A., Cleary, M. J. & Kent, J. H. (2009). Multiple mapping conditioning of turbulent jet diffusion flames. Proceedings of the Combustion Institute, 32(2), pp. 1679-1685. doi: 10.1016/j.proci.2008.06.164
Yan, S. & Ma, Q. (2009). Numerical simulation of interaction between wind and 2D freak waves. European Journal of Mechanics - B/Fluids, 29(1), pp. 18-31. doi: 10.1016/j.euromechflu.2009.08.001
2008
Agrawal, A., Kejalakshmy, N., Chen, J. & Grattan, K. T. V. (2008). Golden spiral photonic crystal fiber: polarization and dispersion properties. Optics Letters, 33(22), pp. 2716-2718. doi: 10.1364/OL.33.002716
Andriotis, A., Gavaises, M. & Arcoumanis, C. (2008). Vortex flow and cavitation in diesel injector nozzles. Journal of Fluid Mechanics, 610, pp. 195-215. doi: 10.1017/s0022112008002668
Arcoumanis, C., Bae, C., Crookes, R. & Kinoshita, E. (2008). The potential of di-methyl ether (DME) as an alternative fuel for compression-ignition engines: A review. Fuel, 87(7), pp. 1014-1030. doi: 10.1016/j.fuel.2007.06.007
Banks, S. P. & Tomas-Rodriguez, M. (2008). From local to global control. 47th IEEE Conference on Decision and Control, 2008. CDC 2008, 40, pp. 4426-4430. doi: 10.1109/cdc.2008.4739231
Chalashkanov, N. M., Kolev, N., Dodd, S. J. & Fothergill, J. (2008). PD pattern recognition using ANFIS. Annual Report - Conference on Electrical Insulation and Dielectric Phenomena, CEIDP, 2, pp. 417-420. doi: 10.1109/ceidp.2008.4772865
Chassaing, J. C., Sayma, A. I. & Imregun, M. (2008). A combined time and frequency domain approach for acoustic resonance prediction. Journal of Sound and Vibration, 311(3-5), pp. 1100-1113. doi: 10.1016/j.jsv.2007.10.006
Chenouda, M. & Ayoub, A. (2008). Inelastic Displacement Ratios of Degrading Systems. Journal of Structural Engineering, 134(6), pp. 1030-1045. doi: 10.1061/(asce)0733-9445(2008)134:6(1030)
Christou, D., Karcanias, N. & Mitrouli, M. (2008). The Euclidean Division as an Iterative ERES-based Process. In: Akrivis, G, Gallopoulos, E, Hadjidimos, A , Kotsireas, IS, Noutsos, D & Vrahatis, MN (Eds.), NumAn 2008 Book of Proceedings. Conference in Numerical Analysis NumAn 2008, 1 Sep 2008 - 5 Sep 2008, Kalamata, Greece.
Diego-Ayala, U., Martinez-Gonzalez, P., McGlashan, N. & Pullen, K. R. (2008). The mechanical hybrid vehicle: an investigation of a flywheel-based vehicular regenerative energy capture system. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 222(11), pp. 2087-2101. doi: 10.1243/09544070jauto677
Dodd, S. J., Chalashkanov, N. M. & Fothergill, J. (2008). Statistical Analysis of Partial Discharges from Electrical Trees Grown in a Flexible Epoxy Resin. In: 2008 IEEE CONFERENCE ON ELECTRICAL INSULATION AND DIELECTRIC PHENOMENA. IEEE Conference on Electrical Insulation and Dielectric Phenomena, 26 - 29 October 2008, Quebec City, Canada.
Dodd, S. J., Chalashkanov, N. M. & Fothergill, J. (2008). Statistical analysis of partial discharges from electrical trees grown in a flexible epoxy resin. Annual Report Conference on Electrical Insulation and Dielectric Phenomena, 2008. CEIDP 2008., pp. 666-669. doi: 10.1109/ceidp.2008.4772838
Elmufti, K., Weerasinghe, D., Rajarajan, M. , Rakocevic, V., Khan, S. & MacDonald, J. (2008). Mobile Web services authentication using SAML and 3GPP generic bootstrapping architecture. International Journal of Information Security, 8(2), pp. 77-87. doi: 10.1007/s10207-008-0065-y
Etkind, A., Glover, I., Singer, H. & Zverevich, V. (2008). Partnership Success Enhanced by StudyNet: Partnership Working Between the University of Hertfordshire Learning and Information Services and National and International Partners, in Particular the Information Resources Centre of the British Higher School of Art and Design, Moscow. Paper presented at the Libraries and Information Resources in the Modern World of Science, Culture, Education, and Business, 7 - 15 Jun 2008, Crimea, Ukraine.
Evangelou, S. A., Limebeer, D. J. N. & Tomas-Rodriguez, M. (2008). Influence of Road Camber on Motorcycle Stability. Journal Of Applied Mechanics, 75(6), 0610201-06102012. doi: 10.1115/1.2937140
Fonseca, J. & O'Sullivan, C. (2008). A re-evaluation of the Fourier descriptor approach to quantifying sand particle geometry. Paper presented at the 4th International Symposium on Deformation Characteristics of Geomaterials, 21-09-2008 - 24-09-2008, Atlanta, Georgia, USA.
Fu, F. ORCID: 0000-0002-9176-8159, Lam, D. & Ye, J. (2008). Modelling semi-rigid composite joints with precast hollowcore slabs in hogging moment region. Journal of Constructional Steel Research, 64(12), pp. 1408-1419. doi: 10.1016/j.jcsr.2008.01.012
Fu, M., Dissado, L. A., Chen, G. & Fothergill, J. (2008). Space charge formation and its modified electric field under applied voltage reversal and temperature gradient in XLPE cable. IEEE Transactions on Dielectrics and Electrical Insulation, 15(3), pp. 851-860. doi: 10.1109/tdei.2008.4543123
Gavaises, M. (2008). Flow in valve covered orifice nozzles with cylindrical and tapered holes and link to cavitation erosion and engine exhaust emissions. International Journal of Engine Research, 9(6), pp. 435-447. doi: 10.1243/14680874jer01708
Giannadakis, E., Gavaises, M. & Arcoumanis, C. (2008). Modelling of cavitation in diesel injector nozzles. Journal of Fluid Mechanics, 616, pp. 153-193. doi: 10.1017/s0022112008003777
Glover, I. & Oliver, A. (2008). Hybridisation of social networking and learning environments. In: Luca, J. & Weippl, E. (Eds.), Proceedings of World Conference on Educational Multimedia, Hypermedia and Telecommunications 2008. (pp. 4951-4958). EdITLib.
Guerrato, D., Nouri, J. M., Stosic, N. , Arcoumanis, C. & Smith, I. K. (2008). Flow measurements in the discharge port of a screw compressor. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 222(4), pp. 201-210. doi: 10.1243/09544089jpme200
He, Y., Wu, W., Zhao, G. , Liu, Y. & Li, Y. (2008). Poly(3,6-dihexyl-thieno[3,2-b]thiophene vinylene): Synthesis, Field-Effect Transistors, and Photovoltaic Properties. Macromolecules, 41(24), pp. 9760-9766. doi: 10.1021/ma801923c
Kaparias, I. (2008). Reliable dynamic in-vehicle navigation. (Unpublished Doctoral thesis, Imperial College)
Kaparias, I., Bell, M. G. H. & Belzner, H. (2008). A new measure of travel time reliability for in-vehicle navigation systems. Journal of Intelligent Transportation Systems: Technology, Planning, and Operations, 12(4), pp. 202-211. doi: 10.1080/15472450802448237
Karcanias, N. (2008). Structure evolving systems and control in integrated design. Annual Reviews in Control, 32(2), pp. 161-182. doi: 10.1016/j.arcontrol.2008.07.004
Kerrouche, A., Boyle, W. J. O., Gebremichael, Y. , Sun, T., Grattan, K. T. V., Taljsten, B. & Bennitz, A. (2008). Field tests of fibre Bragg grating sensors incorporated into CFRP for railway bridge strengthening condition monitoring. Sensors and Actuators A: Physical, 148(1), pp. 68-74. doi: 10.1016/j.sna.2008.07.014
Kovacevic, A. (2008). Competence development in an international product design course. In: Proceedings DESIGN 2008, the 10th International Design Conference. (pp. 1383-1392). The Design Society.
Kyriacou, P. A., Jones, D. P., Langford, R. M. & Petros, A. J. (2008). A pilot study of neonatal and pediatric esophageal pulse oximetry. Anesthesia and Analgesia, 107(3), pp. 905-908. doi: 10.1213/ane.0b013e31817e67d1
Liatsis, P., Nazarboland, M. A., Goulermas, J. Y. , Zeng, X. J. & Milonidis, E. (2008). Automating the processing of cDNA microarray images. International Journal of Intelligent Systems Technologies and Applications, 5(1-2), pp. 115-144. doi: 10.1504/ijista.2008.018170
Lin, M. K,, Silvers, L. J. & Proctor, M. R. E. (2008). Three-Layer Magnetoconvection. Physics Letters A, 373(1), pp. 69-75. doi: 10.1016/j.physleta.2008.10.074
Ma, Q. (2008). A new meshless interpolation scheme for MLPG_R method. CMES-Computer Modeling in Engineering & Sciences, 23(2), pp. 75-89.
McNamara, A. M., Roberts, T. O. L., Morrison, P. R. J. & Holmes, G. R. (2008). Construction of a deep shaft for Crossrail. Geotechnical Engineering, 161(6), pp. 299-309. doi: 10.1680/geng.2008.161.6.299
Mergos, P.E. & Kappos, A. J. (2008). A distributed shear and flexural flexibility model with shear-flexure interaction for R/C members subjected to seismic loading. Earthquake Engineering & Structural Dynamics, 37(12), pp. 1349-1370. doi: 10.1002/eqe.812
Mujic, E., Kovacevic, A., Stosic, N. & Smith, I. K. (2008). The influence of port shape on gas pulsations in a screw compressor discharge chamber. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 222(4), pp. 211-223. doi: 10.1243/09544089jpme205
Nikolic, S., Mehta, V., Ratcliffe, S. , Phillips, J. P., Kyriacou, P. A. & Langford, R. M. (2008). A prospective, randomised, double-blind, double-dummy, placebo-controlled trial to assess the respiratory effects of buprenorphine versus morphine in anaesthetised patients. Paper presented at the The 14th World Congress of Anaesthesiologists, 2-7 Mar 2008, Cape Town, South Africa.
Nouri, J. M., Guerrato, D., Stosic, N. & Arcoumanis, C. (2008). Axial Flow Characteristics within a Screw Compressor. HVAC&R Research, 14(2), pp. 259-274. doi: 10.1080/10789669.2008.10391007
Nouri, J. M. & Hockey, R. (2008). Flow characteristics of Newtonian and non-Newtonian fluids in a vessel stirred by a 60° pitched blade impeller. The International Journal of Multiphysics, 2(1), pp. 83-105. doi: 10.1260/175095408784300261
Ous, T. & Arcoumanis, C. (2008). Visualisation of water accumulation in the flow channels of PEMFC under various operating conditions. Journal of Power Sources, 187(1), pp. 182-189. doi: 10.1016/j.jpowsour.2008.10.072
Papanagnou, C.I. & Halikias, G. (2008). Supply-chain modelling and control under proportional inventory-replenishment policies. International Journal of Systems Science, 39(7), pp. 699-711. doi: 10.1080/00207720802090898
Phillips, J. P., Kyriacou, P. A., Jones, D. P. , Shelley, K. H. & Langford, R. M. (2008). Pulse oximetry and photoplethysmographic waveform analysis of the esophagus and bowel. Current opinion in anesthesiology, 21(6), pp. 779-783. doi: 10.1097/aco.0b013e328317794d
Phillips, J. P., Langford, R. M., Kyriacou, P. A. & Jones, D. P. (2008). Preliminary evaluation of a new fibre-optic cerebral oximetry system. Physiological Measurement, 29(12), pp. 1383-1396. doi: 10.1088/0967-3334/29/12/003
Rakocevic, V. & Hamadani, E. (2008). A Cross Layer Solution to Address TCP Intra-flow Performance Degradation in Multihop Ad hoc Networks. Journal of Internet Engineering, 2(1), pp. 146-156.
Rana, K. P. S. & Khan, S. (2008). A DAQ card based mixed signal virtual oscilloscope. Measurement, 41(9), pp. 1032-1039. doi: 10.1016/j.measurement.2008.02.005
Reyes-Aldasoro, C. C., Biram, D., Tozer, G. M. & Kanthou, C. (2008). Measuring cellular migration with image processing. Electronics Letters, 44(13), pp. 791-793. doi: 10.1049/el:20080943
Reyes-Aldasoro, C. C., Wilson, I., Prise, V. E. , Barber, P. R., Ameer-Beg, M., Vojnovic, B., Cunningham, V. J. & Tozer, G. M. (2008). Estimation of apparent tumor vascular permeability from multiphoton fluorescence microscopic images of P22 rat sarcomas in vivo. Microcirculation, 15(1), pp. 65-79. doi: 10.1080/10739680701436350
Spanos, P. D. & Giaralis, A. (2008). Statistical linearization based estimation of the peak response of nonlinear systems subject to the EC8 design spectrum. In: Santini, A & Moraci, N (Eds.), 2008 SEISMIC ENGINEERING CONFERENCE COMMEMORATING THE 1908 MESSINA AND REGGIO CALABRIA EARTHQUAKE, PARTS 1 AND 2. 2008 SEISMIC ENGINEERING CONFERENCE: Commemorating the 1908 Messina and Reggio Calabria Earthquake, 8–11 July 2008, Reggio Calabria (Italy).
Strotos, G., Gavaises, M., Theodorakakos, A. & Bergeles, G. (2008). Numerical investigation on the evaporation of droplets depositing on heated surfaces at low Weber numbers. International Journal of Heat and Mass Transfer, 51(7-8), pp. 1516-1529. doi: 10.1016/j.ijheatmasstransfer.2007.07.045
Triep, M., Brücker, C., Kerkhoffs, W. , Schumacher, O. & Marseille, O. (2008). Investigation of the washout effect in a magnetically driven axial blood pump. Artificial Organs, 32(10), pp. 778-784. doi: 10.1111/j.1525-1594.2008.00630.x
Weerasinghe, D., Rajarajan, M., Elmufti, K. & Rakocevic, V. (2008). Patient privacy protection using anonymous access control techniques. Methods of Information in Medicine, 47(03), pp. 235-240. doi: 10.3414/me9116
Wu, W., Liu, Y., Wang, Y. , Xi, H., Gao, X., Di, C., Yu, G., Xu, W. & Zhu, D. (2008). High-performance, low-operating-voltage organic field-effect transistors with low pinch-off voltages. Advanced Functional Materials, 18(5), pp. 810-815. doi: 10.1002/adfm.200701125
Wu, W., Zhang, H., Wang, Y. , Ye, S., Guo, Y., Di, C., Yu, G., Zhu, D. & Liu, Y. (2008). High-performance organic transistor memory elements with steep flanks of hysteresis. Advanced Functional Materials, 18(17), pp. 2593-2601. doi: 10.1002/adfm.200701269
Yeo, T. L., Sun, T. & Grattan, K. T. V. (2008). Fibre-optic sensor technologies for humidity and moisture measurement. Sensors and Actuators A: Physical, 144(2), pp. 280-295. doi: 10.1016/j.sna.2008.01.017
Zifan, A., Liatsis, P., Kantartzis, P. , Gavaises, M., Karcanias, N. & Katritsis, D. G. (2008). Automatic 3D Reconstruction of Coronary Artery Centerlines from Monoplane X-ray Angiogram Images. International Journal of Biological and Medical Sciences, 1(1), pp. 44-49.
Zou, C., Fothergill, J. & Rowe, S. W. (2008). The effect of water absorption on the dielectric properties of epoxy nanocomposites. IEEE Transactions on Dielectrics and Electrical Insulation, 15(1), pp. 106-117. doi: 10.1109/t-dei.2008.4446741
2007
Christou, D., Karcanias, N. & Mitrouli, M. (2007). A Symbolic-Numeric Software Package for the Computation of the GCD of Several Polynomials. In: Gallopoulos, E, Houstis, E, Kotsireas, IS , Noutsos, D & Vrahatis, MN (Eds.), NumAn 2007 Book of Proceedings. Conference in Numerical Analysis 2007, 3 - 7 Sep 2007, Kalamata, Greece.
Dissado, L. A., Zadeh, S., Fothergill, J. & Seeley, A. (2007). Temperature dependance of charge packet velocity in XLPE Cable peelings. In: 2007 International Conference on Solid Dielectrics. 2007 International Conference on Solid Dielectrics, 08 July 2008
Fothergill, J. (2007). Ageing, space charge and nanodielectrics: Ten things we don't know about dielectrics. Paper presented at the 2007 International Conference on Solid Dielectrics, ICSD, 08 - 13 July 2007, Winchester, UK. doi: 10.1109/ICSD.2007.4290739
Fothergill, J., Zou, C. & Rowe, S. W. (2007). A "water shell" model for the dielectric properties of hydrated silica-filled epoxy nano-composites. Paper presented at the 2007 International Conference on Solid Dielectrics, Winchester, UK.
Fu, F. ORCID: 0000-0002-9176-8159, Lam, D. & Ye, J. (2007). Parametric study of semi-rigid composite connections with 3-D finite element approach. Engineering Structures, 29(6), pp. 888-898. doi: 10.1016/j.engstruct.2006.07.003
Fu, M., Chen, G., Dissado, A. & Fothergill, J. (2007). Influence of thermal treatment and residues on space charge accumulation in XLPE for DC power cable application. IEEE Transactions on Dielectrics and Electrical Insulation, 14(1), pp. 53-64. doi: 10.1109/tdei.2007.302872
Fu, M., Chen, G., Dissado, L. A. , Fothergill, J. & Zou, C. (2007). The effect of gamma irradiation on space charge behaviour and dielectric spectroscopy of low-density polyethylene. In: In Proceedings of 2007 IEEE International Conference on Solid Dielectrics. 2007 IEEE International Conference on Solid Dielectrics
Giaralis, A. & Spanos, P. D. (2007). A stochastic approach to synthesizing response spectrum compatible seismic accelerograms. In: Pitilakis K (Ed.), Proceedings of the 4th International Conference on Earthquake Geotechnical Engineering (4ICEGE),paper #1319. 4th International Conference on Earthquake Geotechnical Engineering (4ICEGE), 25-28 June 2007, Thessaloniki, Greece.
Hamadani, E. Z. (2007). A cross layer analysis of TCP instability in multihop ad hoc networks. (Unpublished Doctoral thesis, City, University of London)
Hickey, M. & Kyriacou, P. A. (2007). Development of a new splanchnic perfusion sensor. Paper presented at the 29th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, 22-26 Aug 2007, Lyon, France. doi: 10.1109/IEMBS.2007.4352948
Hickey, M. & Kyriacou, P. A. (2007). Fibre-optic sensor for monitoring splanchnic perfusion. In: Gardner, JW (Ed.), Proceedings of the Fifth IASTED International Conference on Biomedical Engineering. The Fifth IASTED International Conference on Biomedical Engineering (BioMED 2007), 14-16 Feb 2007, Innsbruck, Austria.
Hickey, M. & Kyriacou, P. A. (2007). Optimal spacing between transmitting and receiving optical fibres in reflectance pulse oximetry. Journal of Physics: Conference Series, 85, article number 12030.
Kaparias, I., Bell, M. G. H., Bogenberger, K. & Chen, Y. (2007). An approach to time dependence and reliability in dynamic route guidance. Transportation Research Record, 2039(1), pp. 32-41. doi: 10.3141/2039-04
Kaparias, I., Bell, M. G. H., Chen, Y. & Bogenberger, K. (2007). ICNavS: A tool for reliable dynamic route guidance. IET Intelligent Transport Systems, 1(4), pp. 225-233. doi: 10.1049/iet-its:20060066
Kiskiras, J. (2007). Robust stabilisation of multivariable systems: A super-optimisation approach. (Unpublished Doctoral thesis, City, University of London)
Kovacevic, A. ORCID: 0000-0002-8732-2242, Stosic, N., Mujic, E. & Smith, I. K. ORCID: 0000-0003-1524-9880 (2007). CFD Integrated Design of Screw Compressors. Engineering Applications of Computational Fluid Mechanics, 1(2), pp. 96-108. doi: 10.1080/19942060.2007.11015185
Kyriacou, P. A. & Hickey, M. (2007). Development of a Reflectance Fibre-Optic Pulse Oximetry Probe for Use in Abdominal Organs. Paper presented at the The Annual National Conference of the Institute of Physics and Engineering in Medicine (IPEM 2007), 10-12 Sep 2007, Cardiff, UK.
Kyriacou, P. A., Jones, D. P., Langford, R. M. & Petros, A. J. (2007). Pilot study in neonatal and pediatric oesophageal pulse oximetry. Anesthesia and Analgesia, 105(6), S106-S107. doi: 10.1213/01.ane.0000290771.60068.d5
Kyriacou, P. A., Shafqat, K. & Pal, S. K. (2007). Arterial blood oxygen saturation during blood pressure cuff-induced hypoperfusion. Paper presented at the Third International Conference on Optical and Laser Diagnostics (ICOLAD 2007), 22-25 May 2007, London, UK.
Kyriacou, P. A., Shafqat, K. & Pal, S. K. (2007). Investigation of photoplethysmmographic signals and arterial blood oxygen saturation values (SpO(2)) during blood pressure cuff-induced hypoperfusion. Paper presented at the Fifth IASTED International Conference on Biomedical Engineering, 14-17 Feb 2007, Innsbruck, Austria.
Kyriacou, P. A., Shafqat, K. & Pal, S. K. (2007). Investigation of the effect of peripheral perfusion on photoplethysmography and blood oxygen saturation during blood pressure cuff-induced hypoperfusion. British Journal of Anaesthesia, 98(2), pp. 281-297. doi: 10.1093/bja/ael319
Kyriacou, P. A., Shafqat, K. & Pal, S. K. (2007). Photoplethysmography and blood oxygen saturation during blood pressure cuff-induced hypoperfusion. Anesthesia and Analgesia, 105(6), S100-S115. doi: 10.1213/01.ane.0000290771.60068.d5
Littlewood, B. (2007). Limits to dependability assurance - A controversy revisited. In: 29th International Conference on Software Engineering: ICSE 2007 Companion Volume, Proceedings. ICSE 2007, 20-26 May 2007, Minneapolis, USA. doi: 10.1109/ICSECOMPANION.2007.47
Lockett, R. D. & Woolley, R. (2007). Instabilities and soot formation in high-pressure, rich, iso-octane-air explosion flames - 1. Dynamical structure. Combustion and Flame, 151(4), pp. 601-622. doi: 10.1016/j.combustflame.2007.08.004
Nouri, J. M., Marchi, A., Yan, Y. & Arcoumanis, C. (2007). Internal flow and spray characteristics of a pintle-type outward opening piezo-injector. Transactions Journal of Engines, 116(6), pp. 915-934. doi: 10.4271/2007-01-1406
Nouri, J. M., Mitroglou, N., Yan, Y. & Arcoumanis, D. (2007). Internal flow and cavitation in a multi-hole injector for gasoline direct-injection engines. SAE Technical Papers, 2007-01-1405-.. doi: 10.4271/2007-01-1405
Ous, T. & Arcoumanis, C. (2007). Effect of compressive force on the performance of a proton exchange membrane fuel cell. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 221(9), pp. 1067-1074. doi: 10.1243/09544062jmes654
Ous, T. & Arcoumanis, C. (2007). Visualisation of water droplets during the operation of PEM fuel cells. Journal of Power Sources, 173(1), pp. 137-148. doi: 10.1016/j.jpowsour.2007.04.075
Phillips, J. P., Jones, D. P., Kyriacou, P. A. , Chang, S. H., Maney, K. & Langford, R. M. (2007). Preliminary Evaluation of a Fiber Optic Cerebral Oximetry System in Patients Undergoing Neurosurgery. Anesthesia and Analgesia, 105(6), S113-S114. doi: 10.1213/01.ane.0000290771.60068.d5
Phillips, J. P., Kyriacou, P. A., Chang, S. H. , Maney, K., George, K. & Langford, R. M. (2007). Photoplethysmographic measurements from central nervous system tissue. Journal of Physics: Conference Series, 85(1), article number 12029. doi: 10.1088/1742-6596/85/1/012029
Reyes-Aldasoro, C. C., Akerman, S. & Tozer, G. M. (2007). Measuring Red Blood Cell Velocity with a Keyhole Tracking Algorithm. In: Jarm, T, Kramar, P & Zupanic, A (Eds.), http://www.springer.com/engineering/biomedical+engineering/book/978-3-540-73043-9. 11th Mediterranean Conference on Medical and Biological Engineering and Computing 2007, 26-06-2007 - 30-06-2007, Ljubljana, Slovenia. doi: 10.1007/978-3-540-73044-6_210
Reyes-Aldasoro, C. C. & Bhalerao, A. (2007). Volumetric texture segmentation by discriminant feature selection and multiresolution classification. IEEE Transactions on Medical Imaging, 26(1), pp. 1-14. doi: 10.1109/tmi.2006.884637
Rosenschon, M. (2007). Internet gateway discovery for mobile ad hoc networks. (Unpublished Doctoral thesis, City, University of London)
Rybynok, V.O. & Kyriacou, P. A. (2007). A systematic approach for the accurate non-invasive estimation of blood glucose utilizing a novel light-tissue interaction adaptive modelling scheme. Journal of Physics: Conference Series, 85(012033), doi: 10.1088/1742-6596/85/1/012033
Santhi, K., Shafqat, K., Kyriacou, P. A. & Pal, S. K. (2007). Investigation of heart rate variability in patients undergoing hand surgery under axillary plexus block. British Journal of Anaesthesia, 98(2), 282P-283P. doi: 10.1093/bja/ael319
Shafqat, K., Kyriacou, P. A., Pal, S. K. & Kumari, S. (2007). Investigation of heart rate variability in patients under local anaesthesia. In: Gardner, JW (Ed.), Proceedings of the Fifth IASTED International Conference on Biomedical Engineering. The Fifth IASTED International Conference on Biomedical Engineering (BioMED 2007), 14-16 Feb 2007, Innsbruck, Austria.
Shafqat, K., Pal, S. K., Kumari, S. & Kyriacou, P. A. (2007). Changes of Heart Rate Variability in patients under local anaesthesia. Paper presented at the 29th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, 22-26 Aug 2007, Lyon, France.
Shafqat, K., Pal, S. K. & Kyriacou, P. A. (2007). Evaluation of two detrending techniques for application in Heart Rate Variability. In: 2007 ANNUAL INTERNATIONAL CONFERENCE OF THE IEEE ENGINEERING IN MEDICINE AND BIOLOGY SOCIETY, VOLS 1-16. 29th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, 22-26 Aug 2007, Lyon, France. doi: 10.1109/IEMBS.2007.4352275
Spanos, P. D., Giaralis, A. & Politis, N. P. (2007). Algorithmic options for joint time-frequency analysis in structural dynamics applications. In: Bazeos, N, Karabalis, DL, Polyzos, D , Beskos, DE & Katsikadelis, JT (Eds.), Proceedings of the 4th International Conference on Earthquake Geotechnical Engineering. 8th HSTAM International Congress on Mechanics, 12th - 14th July 2007, Patras, Greece.
Spanos, P. D., Giaralis, A. & Politis, N. P. (2007). Time-frequency representation of earthquake accelerograms and inelastic structural response records using the adaptive chirplet decomposition and empirical mode decomposition. Soil Dynamics and Earthquake Engineering, 27(7), pp. 675-689. doi: 10.1016/j.soildyn.2006.11.007
Spanos, P. D., Giaralis, A., Politis, N. P. & Roesset, J. M. (2007). Numerical treatment of seismic accelerograms and of inelastic seismic structural responses using harmonic wavelets. Computer-aided civil and infrastructure design, 22(4), pp. 254-264. doi: 10.1111/j.1467-8667.2007.00483.x
Tse Chung Fai, N. (2007). The development of complex continuous wavelet transform based harmonic analysis and dynamic waveform reconstruction algorithms. (Unpublished Doctoral thesis, City, University of London)
Yan, S. & Ma, Q. (2007). Numerical simulation of fully nonlinear interaction between steep waves and 2D floating bodies using the QALE-FEM method. Journal of Computational Physics, 221(2), pp. 666-692. doi: 10.1016/j.jcp.2006.06.046
Yeo, J. T. L. (2007). Application of FBG-based sensors in build environment. (Unpublished Doctoral thesis, City, University of London)
Zgallai, W. A. (2007). Advanced robust non-invasive foetal heart detection techniques during active labour using one pair of transabdominal electrodes. (Unpublished Doctoral thesis, City, University of London)
Zou, C., Fu, M., Fothergill, J. & Rowe, S. (2007). The Influence of Water on Dielectric Behavior of Silica-filled Epoxy Nano-composites and Percolation Phenomenon. In: Conference on Electrical Insulation and Dielectric Phenomena, 2007 - Annual Report. Conference on Electrical Insulation and Dielectric Phenomena, 14 - 17 October 2007, Vancouver, Canada. doi: 10.1109/CEIDP.2007.4451502
Zou, Y., Wu, W., Sang, G. , Yang, Y., Liu, Y. & Li, Y. (2007). Polythiophene derivative with phenothiazine-vinylene conjugated side chain: Synthesis and its application in field-effect transistors. Macromolecules, 40(20), pp. 7231-7237. doi: 10.1021/ma071402v
2006
Al-Malki, Dana Mohammed (2006). Development of virtual network computing (VNC) environment for networking and enhancing user experience. (Unpublished Doctoral thesis, City University London)
Dissado, L. A., Griseri, V., Peasgood, W. , Cooper, E. S., Fukunaga, K. & Fothergill, J. (2006). The decay of space charge in a glassy epoxy resin following voltage removal. IEEE Transactions on Dielectrics and Electrical Insulation, 13(4), pp. 903-916. doi: 10.1109/tdei.2006.1667752
Fu, F. ORCID: 0000-0002-9176-8159 (2006). Non-linear static analysis and design of Tensegrity domes. Steel and Composite Structures, 6(5), pp. 417-433. doi: 10.12989/scs.2006.6.5.417
Ganapathy, H., White, D. C., Cormack, R. S. , Kyriacou, P. A., Rybynok, V. & Pal, S. K. (2006). Measuring psychomotor responses. British Journal Of Anaesthesia, 97(3), 431P-442P. doi: 10.1093/bja/ael146
Idris, M. & Pullen, K. R. (2006). The Effect of Pre-swirl on the Discharge Coefficient of Rotating Axial Orifices. Paper presented at the International Conference on Energy and Environment (ICEE 2006), 28-30 Aug 2006, Selangor, Malaysia.
Kyriacou, P. A., Crerar-Gilbert, A., Langford, R. M. & Jones, D. P. (2006). Electro-optical techniques for the investigation of photoplethysmographic signals in human abdominal organs. Paper presented at the SECOND INTERNATIONAL CONFERENCE ON OPTICAL AND LASER DIAGNOSTICS, 11-14 Sep 2005, London, UK. doi: 10.1088/1742-6596/45/1/033
Kyriacou, P. A., Pal, S. K., Langford, R. & Jones, D. P. (2006). Electro-optical techniques for the investigation of oesophageal photoplethysmographic signals and blood oxygen saturation in burns. Measurement & Control, 39(3), pp. 77-79. doi: 10.1177/002029400603900302
Lockett, R. D. (2006). Instabilities and soot formation in spherically expanding, high pressure, rich, iso-octane-air flames. Journal of Physics: Conference Series, 45, pp. 154-160. doi: 10.1088/1742-6596/45/1/020
Ma, Q. & Yan, S. (2006). Quasi ALE finite element method for nonlinear water waves. Journal of Computational Physics, 212(1), pp. 52-72. doi: 10.1016/j.jcp.2005.06.014
Mitroglou, N., Nouri, J. M., Gavaises, M. & Arcoumanis, C. (2006). Spray characteristics of a multi-hole injector for direct-injection gasoline engines. International Journal of Engine Research, 7(3), pp. 255-270. doi: 10.1243/146808705x62922
Njuguna, J. A. K. (2006). Micro - and macro - mechanical properties of aerospace composite structures and their dynamic behaviour. (Unpublished Doctoral thesis, City, University of London)
Phillips, J. P., Kyriacou, P. A., George, K. , Priestley, J. V. & Langford, R. M. (2006). An optical fiber photoplethysmographic system for central nervous system tissue. In: Proceedings of the 28th Annual Conference of the IEEE Engineering in Medicine and Biology Society. 28th Annual Conference of the IEEE Engineering in Medicine and Biology Society, 31 Aug - 3 Sep 2006, New York, USA.
Phillips, J. P., Kyriacou, P. A. & Langford, R. M. (2006). Calibration of an optical fibre cerebral oximeter using a Monte Carlo model. In: Proceedings of the 12th Annual Scientific Meeting of the Institute of Physics and Engineering in Medicine. 12th Annual Scientific Meeting of the Institute of Physics and Engineering in Medicine, Sept 2006, Cambrdige, UK.
Phillips, J. P., Langford, R. M., Kyriacou, P. A. & Jones, D. P. (2006). Optical fibre catheter photoplethysmograph. Measurement & Control, 39(3), pp. 84-87. doi: 10.1177/002029400603900304
Politis, N. P., Giaralis, A. & Spanos, P. D. (2006). Joint time-frequency representation of simulated earthquake accelerograms via the adaptive chirplet transform. In: Deodatis, G & Spanos, PD (Eds.), Computational Stochastic Mechanics (CSM-5). 5th International Conference on Computational Stochastic Mechanics (CSM-5), 21 - 23 June 2006, Rhodes, Greece.
Reyes-Aldasoro, C. C. & Bhalerao, A. (2006). The Bhattacharyya space for feature selection and its application to texture segmentation. Pattern Recognition, 39(5), pp. 812-826. doi: 10.1016/j.patcog.2005.12.003
Shafqat, K., Jones, D. P., Langford, R. M. & Kyriacou, P. A. (2006). Filtering techniques for the removal of ventilator artefact in oesophageal pulse oximetry. Medical & Biological Engineering & Computing, 44(8), pp. 729-737. doi: 10.1007/s11517-006-0089-2
Sharma, A. & Agrawal, A. (2006). Non-paraxial Split-step Finite-difference Method for Beam Propagation. Optical and Quantum Electronics, 38(1-3), pp. 19-34. doi: 10.1007/s11082-006-0019-4
Sharma, A. & Agrawal, A. (2006). A new finite-difference-based method for wide-angle beam propagation. IEEE Photonics Technology Letters, 18(8), pp. 944-946. doi: 10.1109/lpt.2006.872314
Singh, C. (2006). Application of airjet vortex generators to control helicopter retreating blade stall. (Unpublished Doctoral thesis, City, University of London)
Wu, W., Xu, W., Hu, W. , Liu, Y. & Zhu, D. (2006). Progresses in organic field-effect transistors and molecular electronics. Frontiers of Chemistry in China, 1(4), pp. 357-363. doi: 10.1007/s11458-006-0051-8
Zou, C., Fothergill, J., Fu, M. & Nelson, J. K. (2006). Improving the Dielectric Properties of Polymers by Incorporating Nano-particles. In: Proceedings of the 10th International Conference on Electrical Insulation (INSUCON). 10th International Conference on Electrical Insulation (INSUCON), 24 - 26 May 2006, Birmingham.
Zou, C., Fu, M., Fothergill, J. & Rowe, S. W. (2006). Influence of absorbed water on the dielectric properties and glass-transition temperature of silica-filled epoxy nanocomposites. In: 2006 Annual Report Conference on Electrical Insulation and Dielectric Phenomena. IEEE Conference on Electrical Insulation and Dielectric Phenomena, 15 - 18 October 2006, Kansas City. doi: 10.1109/CEIDP.2006.311934
2005
Abdulgawad, Z. (2005). The application of data fusion to reinforced concrete NDT - Volume 1. (Unpublished Doctoral thesis, City, University of London)
Abdulgawad, Z. (2005). The application of data fusion to reinforced concrete NDT: Case Studies - Volume 2. (Unpublished Doctoral thesis, City, University of London)
Anwar, N. (2005). Computer modelling of electro-optic modulators. (Unpublished Doctoral thesis, City, University of London)
Bourilkov, J. T. (2005). Electrical pH control in aqueous solutions. (Unpublished Doctoral thesis, City, University of London)
Chen, Y., Kaparias, I., Bell, M. G. H. & Bogenberger, K. (2005). Reliable autonomous route guidance by a constrained A* search considering intersection delays. In: Van Zuylen, H. (Ed.), The Reliability of Traveling and the Robustness of Transport Systems. (pp. 69-92). Netherlands: TRAIL Research School.
Cooper, E. S., Dissado, L. A. & Fothergill, J. (2005). Application of thermoelectric aging models to polymeric insulation in cable geometry. IEEE Transactions on Dielectrics and Electrical Insulation, 12(1), pp. 1-10. doi: 10.1109/tdei.2005.1394009
Fothergill, J., See, K. B. A. & Ajour, M. N. (2005). "Sub-Hertz" Dielectric Spectroscopy. In: Proceedings of 2005 Internationa Symposium on Electrical Insulating Materials. 2005 Internationa Symposium on Electrical Insulating Materials, 05 June 2005
Fu, F. ORCID: 0000-0002-9176-8159 (2005). Structural behavior and design methods of Tensegrity domes. Journal of Construction Steel Research, 61(1), pp. 23-35. doi: 10.1016/j.jcsr.2004.06.004
Fu, M., Chen, G. & Fothergill, J. (2005). "Mirror Image" space charge distribution in XLPE power cable under opposite stressing voltage polarity. Paper presented at the 14th International Symposium on High Voltage Engineering, 25 - 29- August 2005, Beijing.
Fu, M., Chen, G. & Fothergill, J. (2005). The influence of residue on space charge accumulation in purposely modified thick plaque XLPE sample for DC application. Paper presented at the 14th International Symposium on High Voltage Engineering, 25 - 29 August 2005, Tsinghua University, Beijing.
Grigoriadis, K. (2005). Evaluation of concrete patch repairs. (Unpublished Doctoral thesis, City University London)
Holé, S., Dissado, L. A., Ajour, M. N. & Fothergill, J. (2005). Space charge behaviour in epoxy laminates under high constant electric field. Journal of Physics D: Applied Physics, 38(16), pp. 2890-2898. doi: 10.1088/0022-3727/38/16/022
Khan, S. ORCID: 0000-0001-5589-6914, Cai, M., Grattan, K. T. V. ORCID: 0000-0003-2250-3832 , Kajan, K., Honeywood, M. & Mills, S. (2005). Design and investigation of high-speed, large-force and long-lifetime electromagnetic actuators by finite element modelling. Journal of Physics: Conference Series, 15, article number 300. doi: 10.1088/1742-6596/15/1/050
Kovacevic, A. ORCID: 0000-0002-8732-2242 (2005). Boundary adaptation in grid generation for CFD analysis of screw compressors. International Journal for Numerical Methods in Engineering, 64(3), pp. 401-426. doi: 10.1002/nme.1376
Kyriacou, P. A. (2005). Pulse oximetry in the oesophagus. Physiological Measurement, 27(1), R1-R35. doi: 10.1088/0967-3334/27/1/r01
Mandal, J. (2005). Fibre laser development for sensor applications. (Unpublished Doctoral thesis, City, University of London)
Mergos, P.E. & Kawashima, K. (2005). Rocking isolation of a typical bridge pier on spread foundation. Journal of Earthquake Engineering, 9(SPEC. ), pp. 395-414. doi: 10.1142/S1363246905002456
Pal, S. K., Kyriacou, P. A., Kumaran, S. , Fadheel, S., Emamdee, R., Langford, R. M. & Jones, D. P. (2005). Evaluation of oesophageal reflectance pulse oximetry in major burns patients. Burns, 31(3), pp. 337-341. doi: 10.1016/j.burns.2004.10.025
Pierotti., M.J. (2005). Aircraft Maintenance Engineering : developing Aircraft Maintenance Programme using Reliability Centred Maintenance / MSG3 analysis and taking into consideration ETOPs and low utilisation. (Unpublished Doctoral thesis, City University London)
Roy, M., Nelson, J. K., Schadler, L. S. , Zhou, C. & Fothergill, J. (2005). The influence of physical and chemical linkage on the properties of nanocomposites. In: Annual Report - Conference on Electrical Insulation and Dielectric Phenomena, CEIDP. Annual Report - Conference on Electrical Insulation and Dielectric Phenomena, CEIDP, 16 - 19 October 2005, Nashville, USA.
Shen, Y. (2005). Characterization of optical fibre sensor systems for applications at high temperatures. (Unpublished Doctoral thesis, City, University of London)
2004
Agrawal, A. & Sharma, A. (2004). Perfectly Matched Layer in Numerical Wave Propagation: Factors that Affect its Performance. Applied Optics, 43(21), pp. 4225-4231. doi: 10.1364/ao.43.004225
Al-Sinan, M.A. (2004). TQM and the construction industry : Saudi Arabia : a case study. (Unpublished Doctoral thesis, City University London)
Atkin, C.J. (2004). Performance trade-off studies for a retrofit Hybrid Laminar Flow Control system. Paper presented at the 2nd AIAA Flow Control Conference, 26 June - 1 July, Portland, Oregon.
Cowley, A. (2004). Hot ductility and its relationship to transverse cracking in steels. (Unpublished Doctoral thesis, City University London)
El-Shawish, J. M. (2004). Investigation of variable transformers by finite element modelling. (Unpublished Doctoral thesis, City, University of London)
Fothergill, J., Nelson, J. K. & Fu, M. (2004). Dielectric properties of epoxy nanocomposites containing TiO2, Al2O3 and ZnO fillers. Annual Report - Conference on Electrical Insulation and Dielectric Phenomena, CEIDP, pp. 406-409. doi: 10.1109/ceidp.2004.1364273
Haxha, S. (2004). Optimization of ultra-high speed electrooptic modulators using the finite element method. (Unpublished Doctoral thesis, City, University of London)
Kaparias, I. (2004). Bestimmung der Verkehrsqualität auf Streckenabschnitten von Hauptverkehrsstraßen – Untersuchungen zur praktischen Anwendbarkeit des Verfahrens nach Baier an ausgewählten Streckenabschnitten. (Unpublished Masters thesis, Aachen University)
Khoo, K. L., Dissado, L. A., Fothergill, J. & Youngs, I. J. (2004). Molecular dynamics simulation of high frequency (1010 to 10 12 Hz) dielectric absorption in the Hollandite Nax(Ti 8-xCrx)O16. Proceedings of the 2004 IEEE International Conference on Solid Dielectrics ICSD 2004, 2, pp. 550-553. doi: 10.1109/icsd.2004.1350490
Kovacevic, A. ORCID: 0000-0002-8732-2242, Stosic, N. & Smith, I. K. ORCID: 0000-0003-1524-9880 (2004). A numerical study of fluid-solid interaction in screw compressors. International Journal on Computer Application in Technology, 21(4), pp. 148-158. doi: 10.1504/ijcat.2004.006651
Kyriacou, P. A., Pal, S. K., Langford, R. M. & Jones, D. P. (2004). Investigation of oesophageal pulse oximetry in burns patients. Paper presented at the Annual National Conference of the Institute of Physics and Engineering in Medicine (IPEM), 6-8 Sep 2004, York, UK.
Leitis, K. (2004). Analogue hardware based algorithm for low-power and low-voltage position measurement systems with enhanced resolution. (Unpublished Doctoral thesis, City, University of London)
McNamara, A. M. & Taylor, R.N. (2004). The influence of enhanced excavation base stiffness on prop loads and ground movements during basement construction. The Structural Engineer, 82(4), pp. 30-36.
Nelson, J. K. & Fothergill, J. (2004). Internal charge behaviour of nanocomposites. Nanotechnology, 15(5), pp. 586-595. doi: 10.1088/0957-4484/15/5/032
Pal, S. (2004). Characterisation and high-temperature sensing potential of fibre Bragg gratings in specialised optical fibres. (Unpublished Doctoral thesis, City, University of London)
Phillips, J. P., Langford, R. M., Kyriacou, P. A. & Jones, D. P. (2004). Optical Fibre Catheter Photoplethysmography. Paper presented at the The X Mediterranean Conference on Medical and Biological Engineering and Computing, 31 Jul - 5 Aug 2004, Ischia, Italy.
Rybynok, V., Kyriacou, P. A., Pal, S. K. & White, D. C. (2004). Psychomotor testing to detect changes in cerebral function. British Journal of Anaesthesia, 93(4), 604P-618P. doi: 10.1093/bja/aeh495
Shafqat, K., Kyriacou, P. A., Langford, R. M. & Jones, D. P. (2004). FIR Filter Design for Removal of Ventilator Artefact in Oesophageal Photoplethysmographic Signals. Paper presented at the The X Mediterranean Conference on Medical and Biological Engineering and Computing (MEDICON 2004), 31 Jul-04 Aug 2004, Naples, Italy.
Shafqat, K., Kyriacou, P. A., Langford, R. M. & Jones, D. P. (2004). Multirate Processing for Removal of Ventilator Artefact in Oesophageal PPG Signals. Paper presented at the Annual National Conference of the Institute of Physics and Engineering in Medicine (IPEM), 6-8 Sep 2004, York, UK.
Sharma, A. & Agrawal, A. (2004). New method for nonparaxial beam propagation. Journal of the Optical Society of America A: Optics, Image Science & Vision (JOSA A), 21(6), pp. 1082-1087. doi: 10.1364/josaa.21.001082
Williams, M. J. (2004). Control of air-intake lip separation using air-jet vortex generators. (Unpublished Doctoral thesis, City, University of London)
Yoon, J. J. (2004). Single-imager occupant detection based on surface reconstruction. (Unpublished Doctoral thesis, City, University of London)
2003
Carrillo-Ureta, G.E. (2003). Optimal control of fermentation processes. (Unpublished Doctoral thesis, City University London)
Castro Alvaredo, O. & Fring, A. (2003). Conductance from Non-perturbative Methods II. JHEP Conference Proceedings, unesp(2002), article number 10.
Friis, J. (2003). Structural performance of confined high strength concrete columns. (Unpublished Doctoral thesis, City, University of London)
Haidar, A., Fothergill, J., Dissado, L. A. & Hopewell, P. (2003). Anomalous dielectric response of very small quantities of virgin, aged and failed silicone oil. IEEE Transactions on Dielectrics and Electrical Insulation, 10(2), pp. 336-342. doi: 10.1109/tdei.2003.1194120
Kyriacou, P. A., Jones, D. P., Langford, R. M. & Petros, A. J. (2003). Oesophageal Pulse Oximetry in Neonatal and Paediatric Patients. In: UNSPECIFIED . ISBN 1903613191
Kyriacou, P. A., Powell, S. L., Jones, D. P. & Langford, R. M. (2003). Evaluation of oesophageal pulse oximetry in patients undergoing cardiothoracic surgery. Anaesthesia, 58(5), pp. 422-427. doi: 10.1046/j.1365-2044.2003.03091.x
Ladele, E. O. (2003). Vector finite element optimisation of compact spot-size converters in photonics integrated circuits. (Unpublished Doctoral thesis, City, University of London)
Reyes-Aldasoro, C. C. & Bhalerao, A. (2003). Volumetric texture description and discriminant feature selection for MRI. Information Processing in Medical Imaging, 2732, pp. 282-293. doi: 10.1007/978-3-540-45087-0_24
Sishtla, V. M. (2003). Analysis and testing of refrigerant lubricated bearings for centrifugal compressors. (Unpublished Doctoral thesis, City, University of London)
Somasiri, N. (2003). Finite element modelling of polarization issues in optoelectronic systems. (Unpublished Doctoral thesis, City, University of London)
Stosic, N., Kovacevic, A. ORCID: 0000-0002-8732-2242 & Smith, I. K. ORCID: 0000-0003-1524-9880 (2003). Three Dimensional Numerical Analysis of Screw Compressor Performance. Journal of Computer Methods in Applied Mechanics and Engineering, 3(2), pp. 259-284. doi: 10.3233/jcm-2003-3206
Stosic, N., Smith, I. K. ORCID: 0000-0003-1524-9880 & Kovacevic, A. ORCID: 0000-0002-8732-2242 (2003). Optimisation of screw compressors. Applied Thermal Engineering, 23(10), pp. 1177-1195. doi: 10.1016/S1359-4311(03)00059-0
Stosic, N., Smith, I. K. ORCID: 0000-0003-1524-9880 & Kovacevic, A. ORCID: 0000-0002-8732-2242 (2003). Rotor interference as a criterion for screw compressor design. Journal of Engineering Design, 14(2), pp. 209-220. doi: 10.1080/0954482031000091518
Thiruchelvam, C. (2003). Deterioration and spalling of high strength concrete at elevated temperatures. (Unpublished Doctoral thesis, City, University of London)
Yuping, L. (2003). Intelligent technique based digital differential protection for generator-transformer unit. (Unpublished Doctoral thesis, City, University of London)
2002
Ajour, M. N., Dissado, L. A., Fothergill, J. & Norman, P. N. (2002). Dielectric spectroscopy of epoxy/glass composite materials. Conference on Electrical Insulation and Dielectric Phenomena (CEIDP), Annual Report, pp. 438-441. doi: 10.1109/ceidp.2002.1048828
Castro Alvaredo, O. & Fring, A. (2002). Conductance from Non-perturbative Methods I. JHEP Conference Proceedings, unesp(2002), article number 15.
Cooper, E. S., Fothergill, J. & Dissado, L. A. (2002). Application of polymer ageing models to power cables. Conference on Electrical Insulation and Dielectric Phenomena (CEIDP), Annual Report, pp. 392-395.
Crerar-Gilbert, A. J., Kyriacou, P. A., Jones, D. P. & Langford, R. M. (2002). Assessment of photoplethysmographic signals for the determination of splanchnic oxygen saturation in humans. Anaesthesia, 57(5), pp. 442-445. doi: 10.1046/j.0003-2409.2001.02453.x
El-Khafif, S. H. (2002). Application of Higher-Order Statistics and Subspace-Based Techniques to the Analysis and Diagnosis of Electrocardiogram Signals. (Unpublished Doctoral thesis, City, University of London)
Forsyth, D. I. (2002). Fibre Optic Sensors Based on Fluorescence Techniques for Temperature and Strain Measurement. (Unpublished Doctoral thesis, City, University of London)
Griseri, V., Dissado, L. A., Fothergill, J. , Teyssedre, G. & Laurent, C. (2002). Electroluminescence excitation mechanisms in an epoxy resin under divergent and uniform field. IEEE Transactions on Dielectrics and Electrical Insulation, 9(1), pp. 150-160. doi: 10.1109/94.983899
Hagos, S. T. (2002). Solid Oxide Fuel Cell design and Application of Formal Methods. (Unpublished Doctoral thesis, City, University of London)
Kovacevic, A. (2002). Three dimensional numerical analysis for flow prediction in positive displacement screw machines. (Unpublished Doctoral thesis, City University London)
Kyriacou, P. A., Langford, R. M., Powell, S. & Jones, D. P. (2002). Oesophageal Pulse Oximetry: A New Monitoring Site. Paper presented at the Annual National Conference of the Institute of Physics and Engineering in Medicine (IPEM), 2002, Durham, UK.
Kyriacou, P. A., Powell, S., Langford, R. M. & Jones, D. P. (2002). Esophageal pulse oximetry utilizing reflectance photoplethysmography. IEEE Transactions on Biomedical Engineering, 49(11), pp. 1360-1368. doi: 10.1109/tbme.2002.804584
Kyriacou, P. A., Powell, S., Langford, R. M. & Jones, D. P. (2002). Investigation of oesophageal photoplethysmographic signals and blood oxygen saturation measurements in cardiothoracic surgery patients. Physiological Measurement, 23(3), pp. 533-545. doi: 10.1088/0967-3334/23/3/305
Kyriacou, P. A., Wardhaugh, A., Jones, D. P. , Langford, R. M. & Petros, A. J. (2002). Investigation of photoplethysmographic signals in neonatal and paediatric patients. Journal of Intensive Care Medicine, 28(S1), S86-S120. doi: 10.1007/s00134-002-1455-7
Nelson, J. K., Fothergill, J., Dissado, L. A. & Peasgood, W. (2002). Towards an understanding of nanometric dielectrics. In: Conference on Electrical Insulation and Dielectric Phenomena (CEIDP), Annual Report. Conference on Electrical Insulation and Dielectric Phenomena, CEIDP, 20 - 24 October 2002
Spradbery, C, (2002). The influence of thermal history on the hot ductility of Ti containing C Mn Al and C Mn Nb Al steels. (Unpublished Doctoral thesis, City University London)
Vasileiadou, S. (2002). Evolution of System, Modelling and Control Concepts in Ancient Greece. (Unpublished Doctoral thesis, City, University of London)
2001
Atkin, C.J. (2001). New aerodynamic approaches to suction system design. Notes on Numerical Fluid Mechanics, 76(3), pp. 55-63. doi: 10.1007/978-3-540-45359-8_7
Baudet, B.A. (2001). Modelling effects of structure in soft natural clays. (Unpublished Doctoral thesis, City University London)
Cooper, E. S., Fothergill, J., Dissado, L. A. & Hampton, R. N. (2001). Material Morphology and energy barriers to electrical ageing. Paper presented at the IEEE 7th International Conference on Solid Dielectrics, 25-29 June 2001.
Coward, D. P. (2001). Cracking of Laminated Glass Initiated by Low Velocity Impacts. (Unpublished Doctoral thesis, City, University of London)
Dissado, L. A. & Fothergill, J. (2001). The role of local space charge concentrations in producing branched tree structures. In: 4th International Conference on Electric Charge in Solid Insulators (CSC4). 4th International Conference on Electric Charge in Solid Insulators (CSC4), 2 - 6 July 2001
Ghobbar, A. A. (2001). The Application of Material Requirements Planning (MRP) System to Aircraft Parts Inventory. (Unpublished Doctoral thesis, City, University of London)
Grafton, M. A., Fothergill, J., Dissado, L. A. , Elgood, S., Stevens, G. C. & Thomas, J. L. (2001). Controlling flashover between electrode segments in DC power capacitors. Paper presented at the IEEE 7th International Conference on Solid Dielectrics, 25-29 June 2001.
Griseri, V., Dissado, L. A., Fothergill, J. , Laurent, C. & Teyssedre, G. (2001). Photoluminescence, recombination induced luminescence and electroluminescence in epoxy resin. Journal of Physics D: Applied Physics, 34(16), pp. 2534-2540. doi: 10.1088/0022-3727/34/16/320
Griseri, V., Dissado, L. A., Fothergill, J. , Teyssedre, G. & Laurent, C. (2001). Space charge induced luminescence in epoxy resin. In: Proceedings of the 4th International Conference on Electric Charges in Non Conductive Materials. 4th International Conference on Electric Charges in Non Conductive Materials, 2 - 6 July 2001
Kyriacou, P. A., Crerar-Gilbert, A., Langford, R. M. & Jones, D. P. (2001). Investigation of Photoplethysmographic Signals in Human Visceral Organs. In: Proceedings of the IX Mediterranean Conference on Medical and Biological Engineering and Computing (MEDICON 2001). IX Mediterranean Conference on Medical and Biological Engineering and Computing (MEDICON 2001), 12-14 Jun 2001, Pula, Croatia.
Kyriacou, P. A., Moye, A. R., Choi, D. M. , Langford, R. M. & Jones, D. P. (2001). Investigation of the human oesophagus as a new monitoring site for blood oxygen saturation. Physiological Measurement, 22(1), pp. 223-232. doi: 10.1088/0967-3334/22/1/325
Lewington, N. (2001). Enhancing Lift on a Three-Element High Lift Aerofoil System by Installing Air-Jet Vortex Generators. (Unpublished Doctoral thesis, City, University of London)
McNamara, A.M. (2001). Influence of heave reducing piles on ground movements around excavations. (Unpublished Doctoral thesis, City University London)
Monir, H.S. (2001). A new energy absorber for earthquake resistant buildings. (Unpublished Doctoral thesis, City University London)
Powell, S., Kyriacou, P. A., Jones, D. P. & Langford, R. M. (2001). Investigation into the use of a new oesophageal pulse oximeter in cardiothoracic surgery patients. British Journal of Anaesthesia, 87(4), 654P-675P. doi: 10.1093/bja/87.4.654
Rajkumar, N. (2001). Novel Algorithms for Modern Power Systems. (Unpublished Doctoral thesis, City, University of London)
Seeley, A., Dissado, L. A. & Fothergill, J. (2001). Electric field requirements for charge packet generation and movement in XLPE. IEEE Transactions on Dielectrics and Electrical Insulation, 8(6), pp. 232-235. doi: 10.1109/ICSD.2001.955603
Seeley, A., Dissado, L. A., Fothergill, J. , Teyssedre, G., Laurent, C., Montanari, G. C. & Palmieri, F. (2001). The relationship between charge distribution, charge packet formation and electroluminescence in XLPE under DC. IEEE Proceedings of the 2001 IEEE 7th International Conference on Solid Dielectrics, pp. 97-100. doi: 10.1109/icsd.2001.955523
Seeley, A., Fothergill, J., Dissado, L. A. , Stevens, G. C., Montanari, G. C. & Laurent, C. (2001). Evaluation of the onset of space charge and electroluminescence as a marker for cross linked polyethylene ageing. In: Proceedings of the 4th International Conference on Electric Charges in Non Conductive Materials. 4th International Conference on Electric Charges in Non Conductive Materials, 2 - 6 July 2001
Teyssedre, G., Laurent, C., Montanari, G. C. , Palmieri, F., Seeley, A., Dissado, L. A. & Fothergill, J. (2001). Charge distribution and electroluminescence in cross-linked polyethylene under dc field. Journal of Physics D: Applied Physics, 34(18), pp. 2830-2844. doi: 10.1088/0022-3727/34/18/318
Topintzi, E. (2001). System Concepts and Formal Modelling Methods for Business Processes. (Unpublished Doctoral thesis, City, University of London)
2000
Abu-el-zeet, Z.H. (2000). Optimisation techniques for advanced process supervision and control. (Unpublished Doctoral thesis, City University London)
Atkin, C.J. & Schrauf, G. (2000). Progress in linear stability methods for design applications. Paper presented at the European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2000), 11-14 Sep 2000, Barcelona, Spain.
Begum, R. (2000). Neural Network Processing of Impact Echo NDT Data. (Unpublished Doctoral thesis, City, University of London)
Dissado, L. A., Fothergill, J., Seeley, A. , Stevens, G. C., Markey, L., Laurent, C., Teyssedre, G., Nilsson, U. H., Platbrood, G. & Montanari, G. C. (2000). Characterizing HV XLPE cables by electrical, chemical and microstructural measurements on cable peeling: Effects of surface roughness, thermal treatment and peeling location. Electrical Insulation and Dielectric Phenomena, 2000, Annual Report, 1, pp. 136-140. doi: 10.1109/ceidp.2000.885246
Gebremichael, Y. (2000). Highly Birefringent Fibre Based Polarisation Modulated Ellipsometry and Sensor Applications. (Unpublished Doctoral thesis, City, University of London)
Griseri, V., Fukunaga, K., Laurent, C. , Mary, D., Dissado, L. A. & Fothergill, J. (2000). Charge injection, electroluminescence, and ageing of an epoxy resin in high divergent fields. IEE Conference Publication, 2000(473), pp. 88-93. doi: 10.1049/cp:20000483
Ingram, P. (2000). The Application of Numerical Models to Natural Stiff Clays. (Unpublished Doctoral thesis, City, University of London)
Katrisku, Ferdinand Apietu (2000). Finite Element Study of the Second Order (X²) Nonlinear Process of Second Harmonic Generation in Optical Waveguides. (Unpublished Doctoral thesis, City, University of London)
Klotz, U. (2000). The influence of state on the capacity of driven piles in sands. (Unpublished Doctoral thesis, City University London)
Kyriacou, P. A., Crerar-Gilbert, A., Langford, R. M. & Jones, D. P. (2000). A new system for estimating human splanchnic oxygen saturation. Paper presented at the Annual National Conference of the Institute of Physics and Engineering in Medicine (IPEM), 13-14 Sep 2000, Southampton, UK.
Laurent, C., Teyssedre, G., Auge, J. L. , Mazzanti, F., Montanari, G. C., Dissado, L. A., Fothergill, J. & Seeley, A. (2000). Space charge and associated electroluminescence processes in XLPE cable peelings. Paper presented at the 69th Annual Conference on Electrical Insulation and Dielectric Phenomena, 15th - 18th October 2000, Victoria, Canada.
Sikora, I., Pavlin, S. & Bazijanac, E. (2000). Automated Operations and Safety Data Collection and Usage in Contemporary Flight Operations Quality Audit Programs. Paper presented at the Automatizacija u prometu 2000, 21 - 25 Nov 2000, Zagreb, Croatia; Amsterdam, The Netherlands.
Sikora, I., Pavlin, S. & Bazijanac, E. (2000). Flight Operations and Engineering Documentation Managing and Distribution Supported by Intelligent Transport Systems. Paper presented at the Transport, Traffic, and Logistics, 2 - 3 Oct 2000, Portorož, Slovenia.
Sotirelis, C.T. (2000). European deregulation: analysis of the future of European low cost carriers. (Unpublished Doctoral thesis, City University London)
1999
Ariyawansa, D. (1999). Geometric techniques in multiple view point correspondences. (Unpublished Doctoral thesis, City, University of London)
Aziz, M.I.A. (1999). Development of hierarchical optimal control algorithms for interconnected nonlinear dynamical systems. (Unpublished Doctoral thesis, City University London)
Bleakley, G.J. (1999). A methodology for the design of safety critical mechatronics. (Unpublished Doctoral thesis, City, University of London)
Cooper, M. A. R. (1999). Robert Hooke, City Surveyor: An assessment of the importance of his work as Surveyor for the City of London in the aftermath (1667-74) of the Great Fire. (Unpublished Doctoral thesis, City, University of London)
Dissado, L. A., Wise, N. & Fothergill, J. (1999). Electrical tree structures generated by the ab-initio discharge-avalanche model. In: Conference on Electrical Insulation and Dielectric Phenomena (CEIDP), Annual Report. Conference on Electrical Insulation and Dielectric Phenomena, 17 - 20 October 1999, Austin, TX.
Gwyn, B.J. (1999). The use of artificial intelligence techniques for power analysis. (Unpublished Doctoral thesis, City University London)
Hischke, S. (1999). New Receivers for Differentially Encoded Offset-QPSK. (Unpublished Doctoral thesis, City, University of London)
Kyriacou, P. A., Choi, D. M., Moye, A. R. , Langford, R. M. & Jones, D. P. (1999). Design and evaluation of a new electro-optical system for monitoring oesophageal photoplethysmographs. Medical & Biological Engineering & Computing, 37(PART 1), pp. 346-347.
Kyriacou, P. A., Moye, A. R., Gregg, A. , Choi, D. M., Langford, R. M. & Jones, D. P. (1999). Can the Human Oesophagus give adequate PPG Signals for Pulse Oximetry? In: Proceedings of 5th Annual National Conference of the Institute of Physics and Engineering in Medicine (IPEM). 5th Annual National Conference of the Institute of Physics and Engineering in Medicine (IPEM), Sep 1999, Nottingham, UK.
Kyriacou, P. A., Moye, A. R., Gregg, A. , Choi, D. M., Langford, R. M. & Jones, D. P. (1999). A system for investigating oesophageal photoplethysmographic signals in anaesthetised patients. Medical & Biological Engineering & Computing, 37(5), pp. 639-643. doi: 10.1007/bf02513360
Küpper,, D. (1999). A study of the application of air-jet vortex generators to intake ducts. (Unpublished Doctoral thesis, City University London)
Long, Q. (1999). The study of blood flow in human arterial bifurcations by the combination of CFD and MRI. (Unpublished Doctoral thesis, City University London)
McCrea, A. M. (1999). Genetic-Based Optimisation Technique for the Development of Automated Inspection and Restoration Systems for Bridges. (Unpublished Doctoral thesis, City, University of London)
McKinley, B. (1999). Large deformation structural performance of double skin composite construction using British Steel's 'Bi-Steel'. (Unpublished Doctoral thesis, City University London)
Mower, K. G. (1999). An Investigation into the Mechanism of Degradation of Domestic Coatings for the Protection of Wood. (Unpublished Doctoral thesis, City, University of London)
Moye, A. R., Kyriacou, P. A., Gregg, A. , Jones, D. P. & Langford, R. M. (1999). Photoplethysmographic (PPG) signals recorded from the human oesophagus. British Journal of Anaesthesia, 82, pp. 17-18.
Rajarajan, M. (1999). Computer Modelling of Compact Photonics Devices for Optical Communications. (Unpublished Doctoral thesis, City, University of London)
Robert, H. (1999). Use of Colour in Machine Vision: Colour Representation, Edge Detection with Colour, Segmentation of Colour Space and Colour Constancy. (Unpublished Doctoral thesis, City, University of London)
Sikora, I., Pavlin, S. & Bazijanac, E. (1999). Different Automation Concepts in Civil Aircraft Cockpits of Today and Their Influence on Airline Flight Operations. Paper presented at the Automatizacija prometu'99, 17 - 20 Nov 1999, Pula, Croatia; Trieste Italy.
Sikora, I., Stanislav, P. & Bazijanac, E. (1999). The Example of Laptop Based Performance Data Generating and Optimisation in Contemporary Commercial Aircraft Operations. Paper presented at the ISEP '99, 7 - 8 Oct 1999, Ljubljana, Slovenia.
Sun, T. (1999). Fluorescence-based fibre optic sensor systems for temperature and strain measurement. (Unpublished Doctoral thesis, City, University of London)
Tamvaklis, N. (1999). Sampling and Structural Properties of Discretized Linear Models. (Unpublished Doctoral thesis, City, University of London)
Zhao, S. (1999). The Numerical Study of Fluid-Solid Interactions for Modelling Blood Flow in Arteries. (Unpublished Doctoral thesis, City, University of London)
Zolotas, A.C. & Halikias, G. (1999). Optimal design of PID controllers using the QFT method. IEEE Proceedings - Control Theory and Applications, 146(6), pp. 585-589. doi: 10.1049/ip-cta:19990746
1998
Belz, M. (1998). Pollutant monitoring with fibre optics in the deep ultraviolet. (Unpublished Doctoral thesis, City University London)
Brewer, J.A. (1998). Effects of reinforcements on the preservation of paintings on work panel. (Unpublished Doctoral thesis, City, University of London)
Collins, A. L. (1998). The Tomographic Reconstruction of Holographic Interferograms. (Unpublished Doctoral thesis, City, University of London)
Comineli, O. G. (1998). The influence of cooling rate and microalloying additions of Ti and Nb on the hot ductility of HSLA steels. (Unpublished Doctoral thesis, City, University of London)
Dissado, L. A., Fothergill, J. & Bromley, K. S. (1998). Discharge-generated electrical fields and electrical tree structures. Conference on Electrical Insulation and Dielectric Phenomena (CEIDP), Annual Report, 2, pp. 649-652. doi: 10.1109/CEIDP.1998.732981
Eslimy-Isfahany, S.H.R. (1998). Dynamic response of thin-walled composite structures with application to aircraft wings. (Unpublished Doctoral thesis, City University London)
Fearon, R. (1998). The behaviour of a structurally complex clay from an Italian landslide. (Unpublished Doctoral thesis, City University London)
Grant, R.J. (1998). Movements around a tunnel in two-layer ground. (Unpublished Doctoral thesis, City University London)
Karagiorgis, G. (1998). Flow modelling of scroll compressors and expanders. (Unpublished Doctoral thesis, City University London)
Kemp, J. (1998). Development of an optical fibre multiplexed Bragg grating strain measurement system. (Unpublished Doctoral thesis, City, University of London)
Kyriacou, P. A., Gregg, A., Langford, R. M. & Jones, D. P. (1998). Investigation of photoplethysmographic signals in the human oesophagus. Paper presented at the VIII Mediterranean Conference on Medical and Biological Engineering and Computing, 14 Jun - 17 Jun 1998, Lemesos, Cyprus.
Kyriacou, P. A., Gregg, A., Langford, R. M. & Jones, D. P. (1998). Investigation of the characteristics of photoplethysmographic signals in the human oesophagus in anaesthetised patients undergoing routine surgery. In: Proceedings of the 4th Annual National Conference of the Institute of Physics & Engineering in Medicine (IPEM). 4th Annual National Conference of the Institute of Physics & Engineering in Medicine (IPEM), Sep 1998, Brighton, UK.
Li, K. (1998). Intelligent Adaptive Digital Distance Relaying for High Resistance Earth Faults. (Unpublished Doctoral thesis, City, University of London)
Nistazakis, E. (1998). Process and systems based methodologies related to control structure selection. (Unpublished Doctoral thesis, City University London)
Przulj, V. (1998). Computational modelling of vortex shedding flows. (Unpublished Doctoral thesis, City University London)
Razavi, A. K. (1998). Measurement and computation of vortex shedding and its control. (Unpublished Doctoral thesis, City, University of London)
Romare, Dario (1998). The Application of Adaptive Linear and N on-Linear Filters to Fringe Order Identification in White-Light Interferometry Systems. (Unpublished Doctoral thesis, City, University of London)
Sikora, I. (1998). Medium Range Aircraft Fuel Policy in the Light of Available Software, and Knowledge in the Industry. Paper presented at the KoREMA,1998, 25 - 28 Nov 1998, Stubicke Toplice - Graz - Vienna, Croatia-Austria.
Themistos, C. (1998). Characterization of loss/gain in optical waveguides. (Unpublished Doctoral thesis, City, University of London)
Walcott, P. A. (1998). Colour object search. (Unpublished Doctoral thesis, City, University of London)
Wang, X. (1998). Separate adjustment of close range photogrammetric measurements. (Unpublished Doctoral thesis, City, University of London)
1997
Abdelbary, A.F. (1997). Intelligent techniques for dynamic and transient analysis of multi stage desalination plant. (Unpublished Doctoral thesis, City University London)
Addy, C.R. (1997). The application of optical feedback in laser diodes to sensor systems. (Unpublished Doctoral thesis, City, University of London)
Atherton, M.A. (1997). Effective Product Design through Enhancing Robust Engineering Design and Quality Function Deployment. (Unpublished Doctoral thesis, City, University of London)
Dewar, J.D. (1997). Development of a theory of particle mixtures and its application to aggregates, mortars and concretes. (Unpublished Doctoral thesis, City University London)
Fneer, M. K. (1997). Development of Fibre Optic Based Ammonia Sensor For Water Quality Measurement. (Unpublished Doctoral thesis, City, University of London)
Georghiades, G.A. (1997). Aeroelastic behaviour of composite wings. (Unpublished Doctoral thesis, City University London)
Hussein, S. (1997). Characterisation of Planar Defects in Solids Using Ultrasonic Pulse Echo Techniques. (Unpublished Doctoral thesis, City, University of London)
Jovcic, V. (1997). The measurement and interpretation of small strain stiffness of soils. (Unpublished Doctoral thesis, City University London)
Marshall, R. (1997). A Study of Optical-Fibre Electronically-Scanned White Light Interferometric Sensor Systems. (Unpublished Doctoral thesis, City, University of London)
Oliver, A.G. (1997). Air jet vortex generators for wind turbines. (Unpublished Doctoral thesis, City University London)
Papageorgiou, G. N. (1997). A computer-aided design approach to the modelling of sound energy radiation in bounded spatial systems. (Unpublished Doctoral thesis, City, University of London)
Wang, Q. (1997). Studies of multimode fibre linked white interferometric sensor systems. (Unpublished Doctoral thesis, City, University of London)
1996
Buah, P. A. (1996). Finite element methods for computational nonlinear optics. (Unpublished Doctoral thesis, City, University of London)
Calado, J.M.F. (1996). On-line fault diagnosis of industrial processes based on artificial intelligence techniques. (Unpublished Doctoral thesis, City University London)
Chan, W.Y. (1996). A coupled rotor-fuselage aeroelastic analysis using complex rotor modes. (Unpublished Doctoral thesis, City University London)
Chua Ying Kit, J. (1996). The human-machine interface (HMI) and re-bar detection aspects of a non-destructive testing (NDT) robot. (Unpublished Doctoral thesis, City, University of London)
Jeyarupalingam, N. (1996). Steel, steel/concrete composite and reinforced concrete beams and columns exposed to fire. (Unpublished Doctoral thesis, City University London)
Kham, A.Z. (1996). Frequency estimation of pre-stressed and composite floors. (Unpublished Doctoral thesis, City University London)
Kimambo, C. (1996). Modelling of linebreak in high-pressure gas pipes. (Unpublished Doctoral thesis, City University London)
Kruisbrink, AC.H. (1996). The dynamic behaviour of check valves in pipeline systems. (Unpublished Doctoral thesis, City University London)
Skoufari-Themistou, L. (1996). Impact and yield strength behaviour of age-hardening, low-carbon copper-containing steels. (Unpublished Doctoral thesis, City, University of London)
Tanda, G. (1996). Application of optical methods to the study of convective heat transfer in rib-roughened channels. (Unpublished Doctoral thesis, The City University of London)
Yan, Y. (1996). The effects of electric fields on phase change processes in industry. (Unpublished Doctoral thesis, City, University of London)
Zhu, Y. (1996). Digital signal and image processing techniques for ultrasonic non-destructive evaluation. (Unpublished Doctoral thesis, City, University of London)
1995
Addam, A. M. (1995). The use of genetic algorithms in the design of cable-stayed bridges. (Unpublished Doctoral thesis, City, University of London)
Badini, G E. (1995). Investigation of porous glass-like substrates for use in fibre-optic chemical sensors. (Unpublished Doctoral thesis, City, University of London)
Bates, Ronald Anthony (1995). The robust design of complex systems. (Unpublished Doctoral thesis, City University)
Bell, S.A. (1995). Validation of the NPL gravimetric hygrometer. (Unpublished Doctoral thesis, City University London)
Chen, J. (1995). The use of multiple cameras and geometric constraints for 3-D measurement. (Unpublished Doctoral thesis, City University London)
Cook, A. H. (1995). The joining of new to old dental amalgam. (Unpublished Doctoral thesis, City, University of London)
Cuccovillo, T. (1995). Shear behaviour and stiffness of naturally cemented sands. (Unpublished Doctoral thesis, City University London)
Desai, S.B. (1995). Shear resistance at normal and high temperatures of reinforced concrete members with links and central bars.. (Unpublished Doctoral thesis, City University London)
Innes, F. (1995). An experimental investigation into the use of vortex generators to improve the performance of a high lift system. (Unpublished Doctoral thesis, City, University of London)
Iudicello, F. (1995). Numerical simulation of the flow in model skeletal muscle ventricles. (Unpublished Doctoral thesis, City University London)
Khoui, H. (1995). Investigations into distributed artificial intelligence techniques for design with applications to instruments. (Unpublished Doctoral thesis, City, University of London)
Lampakis, Elisa G (1995). Algebraic synthesis methods for linear multivariable control systems. (Unpublished Doctoral thesis, City University)
Pearce, W. (1995). A wind tunnel investigation of the internal pressure dynamics of a single-cell building fitted with a flexible roof and a dominant opening. (Unpublished Doctoral thesis, City, University of London)
Rajroop, P. J. (1995). Fast pulse interactions on a transmission system - (A novel EMP measuring technique using new designed loop probes). (Unpublished Doctoral thesis, City, University of London)
Robinson, Gordon M. (1995). Genetic algorithm optimisation of load cell geometry by finite element analysis. (Unpublished Doctoral thesis, City University London)
Setan, H. B. (1995). Functional and stochastic models for geometrical detection of spatial deformation in engineering: A practical approach. (Unpublished Doctoral thesis, City, University of London)
Smith, A. T. (1995). The effect of cathodic overprotection on the corrosion fatigue behaviour of API 5L X85 grade welded tubular joints. (Unpublished Doctoral thesis, City, University of London)
Vafiadis, Dimitris (1995). Algebraic and Geometric Methods and Problems for Implicit Linear Systems. (Unpublished Doctoral thesis, City, University of London)
Wang, D. N. (1995). White light interferometric sensor systems. (Unpublished Doctoral thesis, City, University of London)
Wongcharoen, T. (1995). Computer modelling of directional coupler based optical devices. (Unpublished Doctoral thesis, City, University of London)
1994
Avalos-Villarreal, E. (1994). Improvements in the productivity of energy usage in the Mexican petroleum refining industry. (Unpublished Doctoral thesis, City, University of London)
Becerra, V.M. (1994). Development and applications of novel optimal control algorithms. (Unpublished Doctoral thesis, City University London)
Chitaree, R. (1994). An optical fibre based polarisation modulation technique: Development and applications. (Unpublished Doctoral thesis, City, University of London)
Comincini, S.E. (1994). Design of a flexible manufacturing cell/system, optimizing for quality. (Unpublished Doctoral thesis, City University London)
Evbuomwan, N.F.O. (1994). Design function deployment: a concurrent engineering design system. (Unpublished Doctoral thesis, City University London)
Khomsi, D. (1994). Optimal design of water distribution networks with reliability considerations. (Unpublished Doctoral thesis, City University London)
Lakkoju, V. N. M. (1994). In-line loading and response of a compliant cylinder in oscillatory and steady flow at critical Reynolds numbers. (Unpublished Doctoral thesis, City, University of London)
Milonidis, E. (1994). Finite settling time stabilization for linear multivariable time-invariant discrete-time systems: An algebraic approach. (Unpublished Doctoral thesis, City, University of London)
Morrison, P.D.J. (1994). Performance of foundations in a rising groundwater environment. (Unpublished Doctoral thesis, City University London)
O'Conner, K. (1994). Swelling behaviour of unsaturated fine grained soils. (Unpublished Doctoral thesis, City University London)
Ragupathy, P. (1994). Nonlinear behaviour of precast concrete frames. (Unpublished Doctoral thesis, City University London)
1993
Basara, B. (1993). A numerical study into the effects of turbulent flows around full-scale buildings. (Unpublished Doctoral thesis, City University London)
Cokijat, D.P. (1993). Turbulence models for non-circular ducts and channels. (Unpublished Doctoral thesis, City University London)
Ewunkem, A.E. (1993). Cavitation erosion of engineering materials. (Unpublished Doctoral thesis, City University London)
Ho, Y. S. (1993). Modelling of the conical entrance orifice plate flow sensor. (Unpublished Doctoral thesis, City, University of London)
Khan, S. ORCID: 0000-0001-5589-6914 & Abdullah, F. (1993). Finite element modelling of electrostatic fields in process tomography capacitive electrode systems for flow response evaluation. IEEE Transactions on Magnetics, 29(6), pp. 2437-2440. doi: 10.1109/20.280991
Khan, S. ORCID: 0000-0001-5589-6914 & Abdullah, F. (1993). Finite element modelling of multielectrode capacitive systems for flow imaging. IEE Proceedings Circuits Devices and Systems, 140(3), pp. 216-222. doi: 10.1049/ip-g-2.1993.0035
Khan, S. ORCID: 0000-0001-5589-6914 & Abdullah, F. (1993). Validation of Finite Element Modelling of Multielectrode Capacitive System for Process Tomography Flow Imaging. In: Beck, M. S. (Ed.), Tomographic Techniques for Process Design and Operation.
Khan, S. ORCID: 0000-0001-5589-6914 & Ivanov, A. (1993). Calculation of static characteristics of linear step motors for control rod drives of nuclear reactors-an approximate approach. 1993 Sixth International Conference on Electrical Machines and Drives(376), pp. 523-528.
Mehrabi, H. A. (1993). Influence of tempering and normalising on the structure and properties of low alloy and plain carbon-manganese steels. (Unpublished Doctoral thesis, City, University of London)
Mouaziz, Z. (1993). Development of fibre-optic based techniques for measurement of aqueous chemical species. (Unpublished Doctoral thesis, City, University of London)
O'Geran, J. H. (1993). Group testing and search. (Unpublished Doctoral thesis, City, University of London)
Olyabek, Z. (1993). Digital optically coupled transient recorder. (Unpublished Doctoral thesis, City, University of London)
Simonian, S. (1993). Measurement of oil-water flows in deviated pipes using thermal anemometry and optical probes. (Unpublished Doctoral thesis, City University London)
Swain, R. C. (1993). The application of pulsed laser Electronic Speckle Pattern Interferometry to the measurement of in-plane strain on high speed rotating components. (Unpublished Doctoral thesis, City, University of London)
Wang, W. (1993). Self-mixing interference in semiconductor lasers: Experimental and theoretical studies. (Unpublished Doctoral thesis, City, University of London)
Yupapin, P. V. P. (1993). Optical pressure sensors using interferometric techniques. (Unpublished Doctoral thesis, City, University of London)
Zhang, Z. Y. (1993). Fibre optic fluorescence thermometry. (Unpublished Doctoral thesis, City, University of London)
1992
Ala, Seshagiri Rao (1992). The design and analysis of boundary data structures. (Unpublished Doctoral thesis, City, University of London)
Beyer, U. (1992). Use of vane and air jet vortex generators in a thrust augmenting ejector. (Unpublished Doctoral thesis, City, University of London)
Cal, A. A. (1992). A unified approach to flutter, dynamic stability and response analysis of high aspect ratio aircraft. (Unpublished Doctoral thesis, City, University of London)
Ciofalo, M. (1992). Large-eddy simulation of turbulent flows with heat transfer in simple and complex geometries. (Unpublished Doctoral thesis, City, University of London)
El-Bardisi, M. M. M. (1992). Reduction of wind turbine noise through design. (Unpublished Doctoral thesis, City, University of London)
Hadad Zarif, M. (1992). Structural properties of linear systems. (Unpublished Doctoral thesis, City, University of London)
Jessett, C. A. (1992). Investigation of the liquefaction of a soil profile using in situ tests. (Unpublished Doctoral thesis, City, University of London)
Kan, Chui-Chui Flora (1992). Modelling the behaviour of a process control operator under stress. (Unpublished Doctoral thesis, City University London)
Khan, J.Z. (1992). Static, dynamic and aeroelastic behaviour of thin-walled composite structures with application to aircraft wings. (Unpublished Doctoral thesis, City University London)
Khan, S. ORCID: 0000-0001-5589-6914 & Ivanov, A. (1992). Methods of calculation of magnetic fields and static characteristics of linear step motors for control rod drives of nuclear reactors. IEEE Transactions on Magnetics, 28(5), pp. 2277-2279. doi: 10.1109/20.179468
Lewis, J.S. (1992). An experimental and computational study of laminar combined natural and forced convection in vertical ducts. (Unpublished Doctoral thesis, City, University of London)
Nassar, A-A. M. (1992). The strength and impact behaviour of intercritically annealed C-Mn-Al-Nb steels. (Unpublished Doctoral thesis, City, University of London)
Ong, C.F. (1992). Computer-aided design of tension structures. (Unpublished Doctoral thesis, City University London)
Popov, P. A. (1992). Accuracy problems in weighing vehicles during motion. (Unpublished Doctoral thesis, City, University of London)
Rackham, J. W. (1992). The design of haunched composite beam frames for buildings. (Unpublished Doctoral thesis, City, University of London)
Shan, X.Y. (1992). Bounded feedback and structural issues in linear multivariable systems. (Unpublished Doctoral thesis, City, University of London)
Stasiek, J. (1992). Liquid crystal thermography and image processing in heat and fluid flow experiments. (Unpublished Doctoral thesis, City University London)
Tam, H.K. (1992). Some applications of Cam-clay in numerical analysis. (Unpublished Doctoral thesis, City University London)
Viggiani, G. (1992). Small strain stiffness of fine grained soils. (Unpublished Doctoral thesis, City University London)
Xu(Xiong), X.Y. (1992). Numerical analysis of blood flow in 3-D arterial bifurcations. (Unpublished Doctoral thesis, City, University of London)
1991
Abu Shousha, R. I. (1991). Hot ductility of steels. (Unpublished Doctoral thesis, City, University of London)
Beshara, F.B.A. (1991). Nonlinear finite element analysis of reinforced concrete structures subjected to blast loading. (Unpublished Doctoral thesis, City University London)
Clarke, Timothy Alan (1991). Application of optical techniques to surveying. (Unpublished Doctoral thesis, The City University)
Ghali, M.O. (1991). Assignment and control in road traffic networks. (Unpublished Doctoral thesis, City, University of London)
Ho, P.S.W. (1991). Structural intermodulation interference in mobile radio systems. (Unpublished Doctoral thesis, City, University of London)
Kartowisastro, I H (1991). Quantitative model validation of manipulative robot systems. (Unpublished Doctoral thesis, City University, London)
Khan, S. ORCID: 0000-0001-5589-6914 & Abdullah, F. (1991). Computer Aided Design of Process Tomography Capacitance Electrode System for Flow Imaging. In: Grattan, K. T. V. ORCID: 0000-0003-2250-3832 (Ed.), Sensors, Technology, Systems and Applications. (pp. 209-214). Florida, USA: CRC Press.
Kibriya, T. (1991). Properties of concrete with crushed brick coarse aggregates. (Unpublished Doctoral thesis, City, University of London)
Lee, I.K. (1991). Mechanical behaviour of compacted decomposed granite soil. (Unpublished Doctoral thesis, City University London)
Mhach, H.K. (1991). An experimental study of hydraulic fracture and erosion. (Unpublished Doctoral thesis, City University London)
Ning, Y. N. (1991). A study of optical fibre interferometric systems using multimode laser diode light sources. (Unpublished Doctoral thesis, City, University of London)
O'Connor, M.A. (1991). The prediction of moment-rotation curves of extended endplate connections for use in semi-rigid analysis of steel frameworks. (Unpublished Doctoral thesis, City, University of London)
Osman, J.H.S. (1991). Decentralized and hierarchical control of robot manipulators. (Unpublished Doctoral thesis, City University London)
Raja, M.A. (1991). A study of the structural behaviour of composite brickwork - Reinforced concrete beams. (Unpublished Doctoral thesis, City, University of London)
Robson, S. (1991). Some influences of the photographic process on the accuracy of close range photogrammetry with a non-metric camera. (Unpublished Doctoral thesis, City, University of London)
Sibley, P. O. (1991). The solitary wave and the forces it imposes on a submerged horizontal circular cylinder: an analytical and experimental study. (Unpublished Doctoral thesis, City University London)
Sivaloganathan, S. (1991). Sketching input for computer aided engineering. (Unpublished Doctoral thesis, City, University of London)
Stephenson, M.S. (1991). A study of the ballistic performance of lightweight armours against small arms ammunition. (Unpublished Doctoral thesis, City, University of London)
Teliani, M. (1991). Adaptive distance relaying scheme for the protection of Teed circuits. (Unpublished Doctoral thesis, City, University of London)
Xu, Z.G. (1991). An investigation of two-phase flow of organic working fluids in the inlet port of a Lysholm screw expander. (Unpublished Doctoral thesis, City, University of London)
Zhang, J. (1991). Expert systems in on-line process control and fault diagnosis. (Unpublished Doctoral thesis, City University London)
1990
AL-Azawi, Z. M. (1990). The response of reinforced concrete slabs to hard missile impact. (Unpublished Doctoral thesis, City University London)
Amini-Largani, Z. (1990). Algorithm development and analysis for on-line optimising control of large scale industrial processes. (Unpublished Doctoral thesis, City, University of London)
Annibal, P. S. (1990). Statistical analysis and Kalman filtering applied to nuclear materials accountancy. (Unpublished Doctoral thesis, City, University of London)
Burton, Peter John (1990). A model of the engineering design process. (Unpublished Doctoral thesis, The City University)
Cherrill, H.E. (1990). The influence of loading rate on excess pore pressures in triaxial tests. (Unpublished Doctoral thesis, City University London)
Cook, S.C. (1990). A knowledge-based system for computer-aided generation of measuring instrument specifications. (Unpublished Doctoral thesis, City, University of London)
Dimond, A.J. (1990). Systems thinking in technical change: An analogical modelling approach. (Unpublished Doctoral thesis, City, University of London)
El-Hami, M. (1990). Research into a new fault generated noise distribution system fault locator. (Unpublished Doctoral thesis, City, University of London)
Gatcombe, C.P. (1990). Computer modelling of high resolution ultrasonic transducers. (Unpublished Doctoral thesis, City, University of London)
Goddard, A.J. (1990). An automatic approach to implementing DSP algorithms on parallel processors. (Unpublished Doctoral thesis, City, University of London)
Hitchins, D.K. (1990). Conceiving systems. (Unpublished Doctoral thesis, City University London)
Jamali, Sadegh (1990). Accurate fault location for power transmission lines. (Unpublished Doctoral thesis, City University)
Laios, B. A. (1990). A unified approach to decentralised control based on the exterior algebra and algebraic geometry methods. (Unpublished Doctoral thesis, City, University of London)
Li, C.W. (1990). On-line distributed hierarchical control and optimisation of large scale systems. (Unpublished Doctoral thesis, City University London)
Samaan, N.D. (1990). Mathematical modelling of instruments for pressure metrology. (Unpublished Doctoral thesis, City, University of London)
Stallebrass, S. E. (1990). Modelling the effect of recent stress history on the deformation of overconsolidated soils. (Unpublished Doctoral thesis, City University London)
Wilson, D.R. (1990). Algebraic synthesis methods for linear multivariable systems: Decentralized stabilization. (Unpublished Doctoral thesis, City, University of London)
Zavliaris, K.D. (1990). Mechanical behaviour of adhesive anchors installed in concrete. (Unpublished Doctoral thesis, City University London)
1989
Agrawal, P. (1989). An investigation into a new approach to UHS protection of EHV transmission lines based on detection of fault generated noise. (Unpublished Doctoral thesis, City, University of London)
Bell, A.P. (1989). Finite element analysis of shear band failure with particular reference to circular plate impact. (Unpublished Doctoral thesis, City University London)
Chandler, J.H. (1989). The acquisition of spatial data from archival photographs and their application to geomorphology. (Unpublished Doctoral thesis, City University London)
Da Silva, R.P.M. (1989). Organic fluid mixtures as working fluids for the trilateral flash cycle system. (Unpublished Doctoral thesis, City University London)
De Moor, E.K. (1989). Modelling of deep tunnel behaviour in clay. (Unpublished Doctoral thesis, City University London)
Ghassemi, F. (1989). Adaptive digital distance protection for series compensated transmission lines. (Unpublished Doctoral thesis, City University London)
Hendawy, Z.M. (1989). Mathematical algorithms for optimisation of large scale systems. (Unpublished Doctoral thesis, City University London)
Kare, R.F. (1989). Influence of weld profile on fatigue crack growth in tubular welded joints. (Unpublished Doctoral thesis, City University London)
Krakowska, T.L. (1989). Wind loading and dynamic response of air-supported roof structures. (Unpublished Doctoral thesis, City University London)
Mashoof, S. (1989). The mathematical modelling of concrete constitutive relationships. (Unpublished Doctoral thesis, City University London)
Pickles, A.R. (1989). The application of critical state soil mechanics to predict ground deformations below an embankment constructed on soft alluvium. (Unpublished Doctoral thesis, City University London)
Roome, S.J. (1989). The Industrial Application of Digital Signal Processing. (Unpublished Doctoral thesis, City University London)
Tiley, C.H. (1989). Pressure transients in a ruptured gas pipeline with friction and thermal effects included. (Unpublished Doctoral thesis, City University)
1988
Lau, W.H.W. (1988). The behaviour of clay in simple shear and triaxial tests. (Unpublished Doctoral thesis, City University London)
Mohamed, ZM.E.Q (1988). Hot ductility of steels. (Unpublished Doctoral thesis, City University London)
Rao, M.R. (1988). An experimental investigation of the use of air jet vortex generators to control shock induced boundary layer separation. (Unpublished Doctoral thesis, City University London)
Richardson, D. (1988). Investigations of threshold effects in soil deformations. (Unpublished Doctoral thesis, City University London)
Soltanahmadi, Abbasali (1988). Dynamics of Flexible Riser Systems. (Unpublished Doctoral thesis, City, University of London)
Song, Guangming (1988). An application of computer aided design and computer aided draughting techniques to gearing.. (Unpublished Doctoral thesis, The City University)
Walters, B.N. (1988). A study of the anodic behaviour of aluminium alloys in alkaline electrolytes. (Unpublished Doctoral thesis, City University London)
1987
Clinton, D.B. (1987). The determination of soil parameters for design from stress path tests. (Unpublished Doctoral thesis, City University London)
Cooke, G.M.E. (1987). The structural response of steel I-section members subjected to elevated temperature gradients across the section. (Unpublished Doctoral thesis, City University London)
Lockett, John Francis (1987). Heat Transfer from Roughened Surfaces using Laser Interferometry. (Unpublished Doctoral thesis, City, University of London)
Mason, P.J. (1987). Scour under air entrained jets below dams and flip buckets. (Unpublished Doctoral thesis, City University London)
1986
Crowther, David Neville (1986). The hot ductility of steels. (Unpublished Doctoral thesis, The City University)
Robert, E.C. (1986). A factorial approach to the study of alkali-silica reaction in concrete. (Unpublished Doctoral thesis, City University London)
Williams, K.J. (1986). The dynamics of floating bodies in a regular wave environment. (Unpublished Doctoral thesis, City University London)
1984
Brant, N.F.A. (1984). Reinforced concrete columns of variable cross section. (Unpublished Doctoral thesis, City University London)
Chilvers, C.A. (1984). Analysis of the structural behaviour of grouted pile/sleeve connections for offshore structures. (Unpublished Doctoral thesis, City University London)
Fudge, R.E. (1984). The re-engineering of VHF mobile radio services in the UK. (Unpublished Doctoral thesis, City University London)
Little, John Antony (1984). Engineering properties of glacial tills in the Vale of St. Albans. (Unpublished Doctoral thesis, City, University of London)
Shaw, S. J. (1984). The fracture of epoxy resins and the effects of rubber inclusions. (Unpublished Doctoral thesis, City University London)
1983
El Kaddah, N.H. (1983). Water wave-structure interaction for small amplitude structural oscillations. (Unpublished Doctoral thesis, City University London)
Mohamed, A.E. (1983). A small strain, large rotation theory and finite element formulation of thin curved beams. (Unpublished Doctoral thesis, City University London)
1982
Al-Mousawi, M.M.M. (1982). Transient flexural wave propagation in beams with discontinuities of cross section. (Unpublished Doctoral thesis, The City University)
Zhang, S.H. (1982). The finite element analysis of thin-walled box spine-beam bridges. (Unpublished Doctoral thesis, City University London)
1981
Kamanda-Kabague, B.M. (1981). Application of mathematical model techniques to the planning and control of overhead costs in the construction industry. (Unpublished Doctoral thesis, City University London)
1980
Wakefield, D. (1980). Dynamic relaxation analysis of pretensioned networks supported by compression arches. (Unpublished Doctoral thesis, City University London)
1978
Hanjalic, K. & Stosic, N. (1978). Some aspects of laboratory testing and computer modelling of two-stage compressors with inter and after-cooling. Proceedings of the IMechE Conference on Design and Operarion of Industrial Compressors, pp. 11-18.
Nelson, R.L. (1978). Investigation of shell and axisymmetric shell structures. (Unpublished Doctoral thesis, City University London)
Papadrakakis, Manolis (1978). Gradient and relaxation nonlinear techniques for the analysis of cable supported structures. (Unpublished Doctoral thesis, City, University of London)
Topping, B.H.V.. (1978). The application of dynamic relaxation to the design of modular space structures. (Unpublished Doctoral thesis, City University London)
1977
Barnes, M.R. (1977). Form finding and analysis of tension space structures by dynamic relaxation. (Unpublished Doctoral thesis, City University London)
Bartleson, C.J. (1977). Factors affecting color appearance and measurement by psychophysical methods. (Unpublished Doctoral thesis, City University London)
1975
Freeman, M. H. (1975). Visual interactions with optical displays with particular reference to biocular magnifiers. (Unpublished Doctoral thesis, City, University of London)
Wirasinghe, N E A (1975). Swirling and non-swirling flow in conical diffusers. (Unpublished Doctoral thesis, City, University of London)
1974
Yousif, S.P. (1974). The Strength of Reinforced and Prestressed Concrete Beams Subjected to Combined Bending, Torsion and Shear. (Unpublished Doctoral thesis, City University London)
1972
McDiarmid, D.L. (1972). Failure Criteria and Cumulative Damage in Fatigue Under Multi-Axial Stress Conditions. (Unpublished Doctoral thesis, City University London)
1971
Taylor, H P J (1971). Fundamental Behaviour in Bending and Shear of Reinforced Concrete. (Unpublished Doctoral thesis, City, University of London)
1970
Swaffield, J. A. (1970). A study of column separation accompanying pressure transients in an aviation kerosene pipeline. (Unpublished Doctoral thesis, City University London)